TY - THES A1 - Wulfert-Holzmann, Paul T1 - Die elektrische Leitfähigkeit des negativen Aktivmaterials moderner Blei-Säure-Batterien T1 - The electrical conductivity of the negative active material in modern lead-acid batteries N2 - Diese Doktorarbeit beschäftigt sich mit dem Wirkmechanismus der elektrischen Leitfähigkeit in Blei-Säure-Batterien. Obwohl ihm eine zentrale Rolle beim „Kohlenstoff-Effekt“ zugeordnet wird, ist der Wirkmechanismus der elektrischen Leitfähigkeit bislang vergleichsweise wenig untersucht worden und konnte dementsprechend noch nicht vollständig aufgeklärt werden. Mit dem Anspruch, diese Forschungslücke zu schließen, zielt die vorliegende Doktorarbeit darauf ab, den Einfluss der elektrischen Leitfähigkeit auf die Performance der Blei-Säure-Batterie systematisch herauszuarbeiten und so einen Beitrag zur Generierung neuer Entwicklungsansätze zu leisten, z. B. in Form von maßgeschneiderten Additiven. Bislang ist noch unklar, ob allein die elektrische Leitfähigkeit des Aktivmaterials relevant ist oder diese auch durch Additive beeinflusst wird. Das liegt vor allem daran, dass geeignete Messmethoden fehlen und deshalb der Einfluss von Additiven auf die elektrische Leitfähigkeit des Aktivmaterials wenig untersucht wurde. Deswegen zielt diese Arbeit auch darauf ab, eine neuartige Messmethode zu entwickeln, um die elektrische Leitfähigkeit des Aktivmaterials im laufenden Betrieb bestimmen zu können. Aufgrund der Vorkenntnisse und Vorarbeiten am Fraunhofer ISC werden die Untersuchungen dabei auf die negative Elektrode limitiert. Insgesamt unterteilt sich die Doktorarbeit in die zwei Abschnitte. Im ersten Abschnitt werden elektrisch isolierende Stöber-Silica als Additive im negativen Aktivmaterial eingesetzt, um den Einfluss der elektrischen Leitfähigkeit des Additivs auf die elektrochemischen Eigenschaften der Batterie herauszustellen. Untersucht wird dabei die u.a. die Doppelschichtkapazität, die Wasserstoffentwicklung und die dynamische Ladeakzeptanz. Im zweiten Abschnitt steht die elektrische Leitfähigkeit des negativen Aktivmaterials im Fokus. Es wird zunächst eine neue Messmethodik entwickelt, die ihre in-situ- und operando-Bestimmung ermöglicht. Nach einer umfassenden Evaluierung und der Betrachtung verschiedener Betriebsparameter wird die Methodik für eine erste proof-of-concept-Messreihe angewendet, um den Einfluss von Additiven auf die elektrische Leitfähigkeit des negativen Aktivmaterials zu untersuchen. N2 - This dissertation deals with the effect mechanism of electrical conductivity in lead-acid batteries. Although it is believed to play a key role in the "carbon effect", the effect mechanism of electrical conductivity has been studied to lesser extent than other factors so far and accordingly has not yet been fully elucidated. With the aim of closing this research gap, the present dissertation aims to systematically work out the influence of electrical conductivity on lead-acid battery performance and thus contribute to the generation of new development approaches, e.g. in the form of tailored additives. So far, it is still unclear whether the electrical conductivity of the active material alone is relevant or whether this is also influenced by additives. This is mainly due to the fact that suitable measurement methods are lacking and therefore the influence of additives on the electrical conductivity of the active material has been investigated to less extent. Therefore, this work also aims to develop a novel measurement method to determine the electrical conductivity of the active material during operation. Due to the previous knowledge and work at Fraunhofer ISC, the investigations are limited to the negative electrode. Overall, the thesis is divided into two sections. In the first section, electrically insulating Stöber silica particles are used as additives in the negative active material in order to highlight the influence of the electrical conductivity of the additive on the electrochemical properties of the battery. Among other things, the double-layer capacitance, hydrogen evolution and dynamic charge acceptance are investigated. The second section focuses on the electrical conductivity of the negative active material. First, a new measurement methode is developed that allows its in-situ and operando determination. After a comprehensive evaluation and consideration of various operational parameters, the methodology is applied to a first proof-of-concept series of measurements to investigate the influence of additives on the electrical conductivity of the negative active material. KW - Bleiakkumulator KW - Blei KW - Batterie KW - Kohlenstoff KW - Elektrochemie KW - Blei-Säure-Batterie KW - Stöber-Silica KW - operando-Messung KW - Lead-acid batteries KW - Stöber silica Y1 - 2022 UR - https://opus.bibliothek.uni-wuerzburg.de/frontdoor/index/index/docId/29839 UR - https://nbn-resolving.org/urn:nbn:de:bvb:20-opus-298397 ER -