@phdthesis{Schulze2016,
  author    = {Schulze, Marcus},
  title     = {Ruthenium Complexes as Water Oxidation Catalysts and Photosensitizers},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142454},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In der vorliegenden Arbeit werden Aspekte der photokatalytischen Wasseroxidationsreaktion behandelt. Der erste Themenschwerpunkt der Dissertation besch{\"a}ftigt sich mit einem supramolekularen Makrozyklus, der drei Rutheniummetallzentren enth{\"a}lt. Dieser neuartige Katalysator zeigt eine sehr hohe katalytische Aktivit{\"a}t und gew{\"a}hrt neue Einblicke in den Mechanismus der Wasseroxidationsreaktion. Des Weiteren wird auf die mit Licht interagierenden Komponenten der photokatalytischen Wasseroxidation eingegangen. Hierbei haben sich azabenz-anellierte Perylenderivate als vielseitige Farbstoffklasse herausgestellt. Die Kombination dieser Farbstoffe mit Metallkomplexen liefert metallorganische Verbindungen, die als Photosensibilisatoren eingesetzt werden k{\"o}nnen.},
  subject      = {Farbstoff},
  language  = {en}
}
@phdthesis{Gehrold2016,
  author    = {Gehrold, Andreas Christian},
  title     = {Synthese und stereochemische Eigenschaften von monomeren Henkelporphyrinen und deren Einsatzm{\"o}glichkeiten in di- und trimeren Systemen},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-134048},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Tetrapyrrole sind nicht nur in nat{\"u}rlichen Systemen von herausragender Bedeutung, sondern haben sich im letzten Jahrhundert zu einem zentralen Forschungsgegenstand verschiedener Naturwissenschaften entwickelt. Chirale Vertreter sind, trotz ihrer Bedeutung in der Natur, hierbei nur am Rande untersucht worden. Im Rahmen der vorliegenden Arbeit wurde, ausgehend von p-Xylylen-verbr{\"u}ckten Porphyrinen, sogenannten Henkelporphyrinen, eine Vielzahl an chiralen Strukturen synthetisiert und stereochemisch untersucht. Die monomeren Vertreter waren abh{\"a}ngig vom Substitutionsmuster der Henkeleinheit achiral oder planar-chiral. {\"U}ber eine kurze und effiziente Syntheseroute wurden die Grundk{\"o}rper im Multigramm-Maßstab aufgebaut und anschließend sowohl strukturell modifiziert als auch funktionalisiert. Die chiralen Vertreter wurden mittels HPLC an chiraler Phase in die Enantiomere getrennt und mittels online-ECD-Spektroskopie wurden die ECD-Spektren im stopped-flow-Modus gemessen. Der Vergleich mit quantenchemisch berechneten ECD-Kurven erlaubte die sichere Zuordnung der Absolutkonfigurationen. Des Weiteren wurden die Monomere r{\"o}ntgenkristallographisch, UV-Vis-spektroskopisch und elektrochemisch eingehend untersucht. Ausgehend von den monomeren Vertretern wurden mittels direkter oxidativer Kupplung oder {\"u}ber {\"U}bergangsmetall-katalysierte Verfahren di- und trimere Systeme aufgebaut. Diese lagen als axial-, helikal- oder planar-chirale Strukturen vor. HPLC-ECD-Kopplung in Verbindung mit quantenchemischen Rechnungen erlaubte auch hier die Aufkl{\"a}rung der absoluten Stereostrukturen. Neben klassischen Porphyrin-Vertretern wurden im Rahmen dieser Arbeit erstmals Henkelchlorine durch OsO4-vermittelte Dihydroxylierung der Henkelporphyrine synthetisiert und vollst{\"a}ndig charakterisiert. Außerdem gelang in Kooperation mit Prof. Br{\"u}ckner (UConn) die Aufkl{\"a}rung der Absolutkonfigurationen helikal-chiraler Indachlorine. Die Arbeit liefert insgesamt eine breite Plattform an chiralen Porphyrinoiden, die f{\"u}r weitere Untersuchungen zu Reaktivit{\"a}t und Struktur von gr{\"o}ßtem Interesse sind, sowie erste detaillierte Einblicke in die faszinierenden Eigenschaften dieser Substanzklasse.},
  subject      = {Porphyrin},
  language  = {de}
}
@phdthesis{Gershberg2016,
  author    = {Gershberg, Jana},
  title     = {Self-assembled Perylene Bisimide Dimers and their Interaction with Double-stranded DNA},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136725},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The self-assembly of molecules based on π-π-interactions and hydrogen bonding is of significant importance in nature. These processes enable the formation of complex supramolecular structures with diverse functions. For the transfer of the concepts from nature to artificial supramolecular structures, a basic understanding of those processes is needed. For this purpose, π-conjugated aromatic molecules with an easy synthetic access are suitable as their functionalities can be changed effortless. Perylene bisimide (PBIs) dyes are attractive candidates since they fulfill these requirements owing to their tendency to self-assemble in solution due to their large aromatic π-surfaces. Furthermore, the changes of the optical properties (for instance absorption, emission or circular dichroism) of PBI dyes, caused by their self-assembly, are easy to study experimentally. Structural variations of PBI dyes including additional non-covalent interactions, such as hydro-gen bonding, enable to direct their self-assembly process. Thus, the formation of interesting su-pramolecular structures of PBI dyes could be realized, although, often of undefined size. The aim of this thesis was to develop strategies to restrict the aggregate size of PBI dyes. Therefore, de-fined structural features of PBI molecules were combined and a variation of external influences such as solvent and concentration included. Furthermore, DNA was utilized as a template for the limitation of the aggregate size of PBI dyes. Chapters 1 and 2 provide general information and describe examples from literature which are necessary to understand the following experimental work. The first chapter is based on the inter-actions of various molecules with DNA. Therefore, DNA is considered as a supramolecular biom-acromolecule containing specific structural and functional features to interact with small mole-cules. Afterwards, the main interaction modes of small molecules with DNA such as electrostatic interaction, intercalation and groove binding with corresponding examples are discussed. Among all techniques applied to study the interaction of ligands with DNA, UV/Vis absorption, fluores-cence and circular dichroism spectroscopy were described in detail. At the end of this chapter, examples of already pre-associated systems showing interactions with DNA are presented. The second chapter is focused on the determination and mathematic evaluation of the self-assembly processes. The simplest models such as monomer-dimer and isodesmic model are de-scribed and supplemented by examples. Furthermore, the simplest modification of the isodesmic model, the K2-K model, is presented. Additionally, experimental problems, which may arise dur-ing the investigations of the self-assembly processes, are addressed. For the description of the entire self-assembly process, a sufficiently large concentration range and an appropriate measure-ment method that is sensitive in this concentration range is necessary. Furthermore, the full transi-tion from the monomeric to the aggregated species has to be spectroscopically ascertainable. This enables an accurate mathematic evaluation of the self-assembly process and provides meaningful binding constants. The self-assembly pathway can be controlled by the variation of solvent, con-centration or temperature. However, this pathway can also be directed by a rational design of the molecular structure of the considered system. For example, a specific interplay of π-π-interactions and hydrogen bonding may promote isodesmic as well as cooperative growth into large struc-tures. The main focus of this thesis is to develop strategies to control the aggregate size of PBI dyes (Chapter 3). For this purpose, a PBI scaffold was designed which contains hydrogen bonding amide functions at the imide positions derived from the amino acid L-alanine and solubilizing side groups in the periphery (Figure 81). The variations of the residues R/R' range from didodecylox-yphenyl, didodecylphenyl, dioligo(ethylene glycol)phenyl to branched and linear alkyl chains. The most extensive study of the aggregation behavior was performed for the PBI dye 5. Concen-tration-dependent 1H NMR and UV/Vis absorption measurements clearly revealed the formation of dimers in chloroform. Further investigations by means of 2D NMR, VPO and ITC confirmed the exclusive presence of dimer aggregates of PBI 5 in the investigated concentration range. Mo-lecular modelling studies, supported by NMR and FT-IR experiments, provided structural reasons for the absence of further growth into larger aggregates. The specific combination of π-π interac-tions and hydrogen bonds between the NH groups of the amide groups and the carbonyl oxygen atoms of the PBI core are decisive for the formation of the discrete dimer stack (see Figure 82). The investigations of the aggregation behavior of PBIs 6-9 were less extensive but consistent with the results obtained for PBI 5. However, the determined binding constants vary over a considera-ble range of 1.1 x 102 M-1 (PBI 8) to 1.4 x 104 M-1 (PBI 5). These differences could be attributed to structural variations of the dyes. The electron-rich phenyl substituent promoted the aggregation tendency of PBIs 5-7 compared with 8 and 9 that carry only alkyl side chains. Thus, the π-π in-teractions of bay-unsubstituted PBI cores in combination with hydrogen bonding of the amide functions control the formation of discrete dimers of these PBI dyes. The variation of conditions, such as solvent, change the aggregation behavior of PBI dyes. In the solvents toluene and/or methylcyclohexane, anti-cooperative growth into larger aggregates of PBI 5 was observed (Chapter 4). The important feature of this self-assembly process is the absence of isosbestic points over the whole concentration range in the UV/Vis absorption measurements. The preference for the dimeric species of PBI 5 remained in both solvents as well as in mixtures of them, but upon increasing the concentration these dimers self-assemble into larger aggregates. An important feature of the self-assembly process is the preferred formation of even-numbered aggregates compared to the odd-numbered ones (see Figure 83). Although, the conventional K2-K model provides plausible binding constants, it is not capable to describe the aggregation behavior adequately, since it considers a continuous size distribution. The gradual aggregation process over dimers, tetramers, hexamers, etc. was therefore analyzed with a newly developed K2-K model for anti-cooperative supramolecular polymerization. By the global analysis of the UV/Vis absorption spectra a very good agreement between the experimental and simulated spectra, which were based on the new K2-K model, was obtained. Furthermore, the calculated UV/Vis absorption spectra of a dimer and an aggregate highlighted the most important structural differences. The absorption spectrum of the dimer still has a pronounced vibronic structure which gets lost in the spectrum of the aggregate. In another part of this work, a series of water soluble PBI dyes were described which contain similar PBI scaffolds as PBIs 5-8 (Chapter 5). These PBI dyes self-assemble into similar dimer aggregates in water due to their positively charged side chains causing electrostatic repulsion be-tween the molecules (see Figure 84). Here, however, the self-assembly behavior has not been studied thoroughly in water due to the similarities of already reported PBI dyes. Instead, the focus here is on the characterization of the interactions of these dyes with DNA/RNA. The comprehensive studies using thermal denaturation experiments showed the high stability of these PBI/polynucleotide complexes. The spermine-functionalized PBI dyes having six positive charges showed strong interactions with DNA/RNA which was expressed in a signif-icant increase of the melting temperatures of DNA/RNA (ΔTm values between 7 and > 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85).},
  subject      = {Perylentetracarbons{\"a}urederivate},
  language  = {en}
}
@phdthesis{Ceymann2016,
  author    = {Ceymann, Harald},
  title     = {Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136850},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance.},
  subject      = {Squaraine},
  language  = {en}
}
@phdthesis{Ehbets2016,
  author    = {Ehbets, Julia},
  title     = {(β-AMINOALKYL)Silane: Synthese und Hydrolyseuntersuchungen von Cα-, Cβ-, Cγ- UND Cζ-funktionalisierten Alkoxy(Aminoalkyl)Silanen},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133071},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Die vorliegende Arbeit behandelt die Synthese sowie die Eigenschaften einer Serie von organofunktionellen α-, β-, γ- und ζ-Silanen, mit einem Fokus auf Alkoxy(aminoalkyl)silanen. Der Großteil dieser Modellstrukturen wurde anschließend hinsichtlich ihrer Hydrolysekinetik in Abh{\"a}ngigkeit der Art der funktionellen Gruppe X (NMe3+, N(H)COOMe, N(Me)COOMe, NH2, N(H)Me, NMe2, Pip, Me), des Abstandes des Substituenten X zu dem Silicium-Atom (α-, β-, γ- und ζ-Position), der Alkoxy-Abgangsgruppe am Silicium-Atom (MeO, iPrO, tBuO) und des pD-Wertes der Reaktionsl{\"o}sung systematisch untersucht. Eine große Herausforderung dieser Studie war die Synthese von β-Amino-funktionalisierten Alkoxysilanen, deren Chemie aufgrund ihrer Labilit{\"a}t bisher kaum erforscht ist. Die einzigen literaturbekannten Vertreter stellten bislang das Trialkoxysilan (EtO)3Si(CH2)2NH2 (1) und sein Dialkoxy-Derivat (EtO)2SiMe(CH2)2NH2 (2) dar, welche durch Reaktion des entsprechenden 2-(Chlorethyl)silans mit Ammoniak unter hohem Druck im Autoklaven zug{\"a}nglich sind. Unter Verwendung dieser Synthesemethode konnte sowohl die Synthese der Silane 1 und 2 reproduziert, als auch das Trimethoxy-Analogon (MeO)3Si(CH2)2NH2 (3) erstmals dargestellt werden. Dar{\"u}ber hinaus wurde eine Serie von organofunktionellen Monoalkoxysilanen des Typs RORSiMe(CH2)2X und ROSiMe2C(H)MeCH2X (4b-18b) im pr{\"a}parativen Maßstab analyserein dargestellt. Des Weiteren wurden die entsprechenden α-Silane 8a, 11a, 14a und 15a, die γ-Silane 6c, 8c, 11c, 13c-15c und 18c sowie die ζ-Silane 19 und 20 erstmals dargestellt. Weiterhin wurden die bereits literaturbekannten α-Silane 16a-18a und γ-Silane 7c, 16c und 17c f{\"u}r die Verwendung in den Hydrolyseexperimenten synthetisiert. Die Charakterisierung aller im Rahmen dieser Arbeit synthetisierten Verbindungen erfolgte mittels NMR-Spektroskopie (1H-, 13C-, 15N- und 29Si-NMR) und Elementaranalysen (C, H, N) bzw. HRMS-Experimente. Die hydrolytische Spaltung der Si-OC-Bindung in Alkoxy(aminoalkyl)silanen stellt einen technisch sehr wichtigen Schl{\"u}sselschritt in der Synthese von Amino-funktionalisierten Polysiloxanen dar. Um den Mechanismus dieser Si-OC-Bindungsspaltung besser zu verstehen, wurden die Alkoxysilane 4b, 4c, 5b, 6b, 6c, 7b, 7c, 8a-8c, 9b, 11a-11c, 12b, 14a-14c, 15a-15c, 16a-16c, 17a-17c, 18a-18c, 19 und 20 hinsichtlich ihrer Hydrolysekinetik in CD3CN/D2O unter sauren und basischen Bedingungen mittels 1H-NMR-Spektroskopie untersucht. Die Ergebnisse dieser Struktur-Reaktivit{\"a}ts-Studie zeigten, dass die beobachteten unterschiedlichen Hydrolysegeschwindigkeiten das Resultat mehrerer Faktoren sind, wie beispielsweise elektronische und sterische Effekte, der große Einflusses des pD-Wertes und auch intramolekulare N-H∙∙∙O-Wasserstoffbr{\"u}ckenbindungen zwischen der protonierten Amino-Gruppe und der Alkoxy-Abgangsgruppe. Da der Einfluss dieser Effekte auf die Reaktivit{\"a}t der untersuchten α-, β-, γ- und ζ-Silane sehr unterschiedlich ist, kann kein klarer Zusammenhang zwischen der Hydrolysereaktivit{\"a}t und der Positionierung der stickstoff-haltigen funktionellen Gruppe (α-, β-, γ- und ζ-Position) erkannt werden. Die jeweils beobachtete Reaktivit{\"a}t entspricht vielmehr einer Summe aller zuvor genannten Teileffekte. Die Erkenntnisse, die im Rahmen dieser Arbeit erhalten wurden, erm{\"o}glichen ein verbessertes grundlegendes Verst{\"a}ndnis der Reaktivit{\"a}t von funktionalisierten α-, β-, γ- und ζ-Silanen, und sind f{\"u}r die Silicon-Industrie von großem Interesse, da sie eine gezieltere Anwendung der α-, β- und γ-Aminosilane in der Synthese von technisch wichtigen Amino-funktionalisierten Polysiloxanen erlauben.},
  subject      = {Hydrolyse},
  language  = {de}
}