@phdthesis{Leikeim2022,
  author    = {Leikeim, Anna},
  title     = {Vascularization Strategies for Full-Thickness Skin Equivalents to Model Melanoma Progression},
  doi       = {10.25972/OPUS-27295},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-272956},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Malignant melanoma (MM) is the most dangerous type of skin cancer with rising incidences worldwide. Melanoma skin models can help to elucidate its causes and formation or to develop new treatment strategies. However, most of the current skin models lack a vasculature, limiting their functionality and applicability. MM relies on the vascular system for its own supply and for its dissemination to distant body sites via lymphatic and blood vessels. Thus, to accurately study MM progression, a functional vasculature is indispensable. To date, there are no vascularized skin models to study melanoma metastasis in vitro, which is why such studies still rely on animal experimentation. In the present thesis, two different approaches for the vascularization of skin models are employed with the aim to establish a vascularized 3D in vitro full-thickness skin equivalent (FTSE) that can serve as a test system for the investigation of the progression of MM. Initially, endothelial cells were incorporated in the dermal part of FTSEs. The optimal seeding density, a spheroid conformation of the cells and the cell culture medium were tested. A high cell density resulted in the formation of lumen-forming shapes distributed in the dermal part of the model. These capillary-like structures were proven to be of endothelial origin by staining for the endothelial cell marker CD31. The established vascularized FTSE (vFTSE) was characterized histologically after 4 weeks of culture, revealing an architecture similar to human skin in vivo with a stratified epidermis, separated from the dermal equivalent by a basement membrane indicated by collagen type IV. However, this random capillary-like network is not functional as it cannot be perfused. Therefore, the second vascularization approach focused on the generation of a perfusable tissue construct. A channel was molded within a collagen hydrogel and seeded with endothelial cells to mimic a central, perfusable vessel. The generation and the perfusion culture of the collagen hydrogel was enabled by the use of two custom-made, 3D printed bioreactors. Histological assessment of the hydrogels revealed the lining of the channel with a monolayer of endothelial cells, expressing the cell specific marker CD31. For the investigation of MM progression in vitro, a 3D melanoma skin equivalent was established. Melanoma cells were incorporated in the epidermal part of FTSEs, representing the native microenvironment of the tumor. Melanoma nests grew at the dermo-epidermal junction within the well stratified epidermis and were characterized by the expression of common melanoma markers. First experiments were conducted showing the feasibility of combining the melanoma model with the vFTSE, resulting in skin models with tumors at the dermo-epidermal junction and lumen-like structures in the dermis. Taken together, the models presented in this thesis provide further steps towards the establishment of a vascularized, perfusable melanoma model to study melanoma progression and metastasis.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Kremer2019,
  author    = {Kremer, Antje},
  title     = {Tissue Engineering of a Vascularized Meniscus Implant},
  doi       = {10.25972/OPUS-18432},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-184326},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {The knee joint is a complex composite joint containing the C-shaped wedge-like menisci composed of fibrocartilage. Due to their complex composition and structure, they provide mechanical resilience to the knee joint protecting the articular cartilage. Because of the limited repair potential, meniscal injuries do not only affect the meniscus itself but also lead to altered joint homeostasis and inevitably to secondary osteoarthritis. The meniscus was characterized focusing on its anatomy, structure and meniscal markers such as aggrecan, collagen type I (Col I) and Col II. The components relevant for meniscus tissue engineering, namely cells, Col I scaffolds, biochemical and biomechanical stimuli were studied. Meniscal cells (MCs) were isolated from meniscus, mesenchymal stem cells (MSCs) from bone marrow and dermal microvascular endothelial cells (d-mvECs) from foreskin biopsies. For the human (h) meniscus model, wedge-shape compression of a hMSC-laden Col I gel was successfully established. During three weeks of static culture, the biochemical stimulus transforming growth factor beta-3 (TGF beta-3) led to a compact collagen structure. On day 21, this meniscus model showed high metabolic activity and matrix remodeling as confirmed by matrix metalloproteinases detection. The fibrochondrogenic properties were illustrated by immunohistochemical detection of meniscal markers, significant GAG/DNA increase and increased compressive properties. For further improvement, biomechanical stimulation systems by compression and hydrostatic pressure were designed. As one vascularization approach, direct stimulation with ciclopirox olamine (CPX) significantly increased sprouting of hd-mvEC spheroids even in absence of auxiliary cells such as MSCs. Second, a cell sheet composed of hMSCs and hd-mvECs was fabricated by temperature triggered cell sheet engineering and transferred onto the wedge-shaped meniscus model. Third, a biological vascularized scaffold (BioVaSc-TERM) was re-endothelialized with hd-mvECs providing a viable vascularized network. The vascularized BioVaSc-TERM was suggested as wrapping scaffold of the meniscus model by using two suture techniques, the all-inside-repair (AIR) for the posterior horn, and the outside-in-refixation (OIR) for the anterior horn and the middle part. This meniscus model for replacing torn menisci is a promising approach to be further optimized regarding vascularization, biochemical and biomechanical stimuli.},
  subject      = {Meniskus},
  language  = {en}
}
@phdthesis{Lodes2021,
  author    = {Lodes, Nina Theresa},
  title     = {Tissue Engineering f{\"u}r seltene Erkrankungen mit St{\"o}rungen des mukozili{\"a}ren Transports},
  doi       = {10.25972/OPUS-20017},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200178},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Bei der zystischen Fibrose (CF) sowie der prim{\"a}ren Ziliendyskinesie (PCD) handelt es sich um zwei seltene Erkrankungen, die unter anderem den mukozili{\"a}ren Transport beeintr{\"a}chtigen. CF geh{\"o}rt hierbei zu den am h{\"a}ufigsten vorkommenden angeborenen Stoffwechselerkrankungen, wobei Betroffene unter einem Defekt des Cystic Fibrosis Transmembrane Conductor Regulator (CFTR)-Gens leiden, der durch die Produktion von hochviskosem Sekret in muzinproduzierenden Organen, wie dem gastrointestinalen Trakt und der Lunge, gekennzeichnet ist. Patienten, die an PCD leiden, weisen Defekte in, zum jetzigen Zeitpunkt, ca. 38 bekannten und PCD-assoziierten Genen auf, die in strukturellen Defekten des zili{\"a}ren Apparats und somit in dysfunktionalen Kinozilien resultieren. Da aktuell weder f{\"u}r die CF noch f{\"u}r die PCD eine Heilung m{\"o}glich ist, steht bei der Therapie vor allem die Linderung der Symptome im Fokus. Grundlegendes Ziel ist der langfristige Erhalt der Lungenfunktion sowie die Pr{\"a}vention bakterieller Infekte. Als bisherige Modellsysteme zur Erforschung m{\"o}glicher Therapeutika gelten Tiermodelle, die den humanen Ph{\"a}notyp aufgrund von Speziesdiversit{\"a}t nicht vollst{\"a}ndig abbilden k{\"o}nnen. Als vielversprechende Testsysteme f{\"u}r die zystische Fibrose gelten humane intestinale Organoidkulturen. Nachdem allerdings vorwiegend respiratorische Symptome f{\"u}r die Mortalit{\"a}t der Patienten verantwortlich sind, stellen CF-Atemwegsmodelle bessere Testsysteme f{\"u}r zuk{\"u}nftige Therapeutika dar. Atmungsorganoidkulturen wurden verwendet, um die CFTR-Funktionalit{\"a}t zu untersuchen, repr{\"a}sentieren aber nicht vollst{\"a}ndig die in vivo Situation. Deshalb werden zur Entwicklung neuer Therapiestrategien patientenspezifische 3D in vitro Testsysteme der humanen Atemwege ben{\"o}tigt, die insbesondere im Hinblick auf personalisierte Medizin ihren Einsatz finden. In der vorliegenden Arbeit wurde eine f{\"u}r den Lehrstuhl neue Methode zur Zellgewinnung aus nasalen Schleimhautabstrichen etabliert, die eine standardisierte Versorgung mit humanem Prim{\"a}rmaterial garantiert. Zur Generierung einer krankheitsspezifischen Zelllinie, wie beispielsweise einer PCD-Zelllinie mit Hilfe des CRISPR/Cas9-Systems, ist eine Atemwegszelllinie erforderlich, die die in vivo Situation vollst{\"a}ndig repr{\"a}sentiert. So wurden vier verschiedene respiratorische Epithelzelllinien (HBEC3-KT, Calu-3, VA10 und Cl-huAEC) auf ihren mukozili{\"a}ren Ph{\"a}notyp hin untersucht, wobei lediglich die Zelllinie HBEC3-KT in zilientragende Zellen differenzierte. Diese zeigten jedoch nur auf ca. 5 \% der Modelloberfl{\"a}che Kinozilien, wodurch die humane respiratorische Mukosa nicht komplett abgebildet werden konnte und die HBEC3-KT-Zelllinie keine geeignete Zelllinie zur Generierung einer PCD-Zelllinie darstellte. Mit Hilfe des Tissue Engineering war es m{\"o}glich, 3D in vitro Testsysteme basierend auf zwei unterschiedlichen Matrices, der biologischen SIS (small intestinal submucosa) und der synthetischen Polyethylenterephthalat (PET)-Membran, aufzubauen. Es wurden 3D Atemwegstestsysteme mit humanen prim{\"a}ren nasalen und tracheobronchialen Epithelzellen generiert. Erg{\"a}nzend zu histologischen Untersuchungen und zur Charakterisierung spezifischer Marker des respiratorischen Systems mittels Immunfluoreszenz, wurde die Ultrastruktur der Modelle, mit speziellem Fokus auf zili{\"a}re Strukturen, analysiert. Um R{\"u}ckschl{\"u}sse auf die zili{\"a}re Funktionalit{\"a}t ziehen zu k{\"o}nnen und somit eine hohe in vivo Korrelation zu best{\"a}tigen, wurde im Rahmen dieser Arbeit am Lehrstuhl f{\"u}r Tissue Engineering und Regenerative Medizin die Methode der Hochgeschwindigkeitsvideomikroskopie etabliert, welche die Analyse der Zilienschlagfrequenz sowie des mukozili{\"a}ren Transports erm{\"o}glicht. Ebenfalls wurde der Einfluss von isotoner Kochsalzl{\"o}sung und des � 2-adrenergen Agonisten Salbutamol, das vor allem als Bronchodilatator bei Asthmapatienten eingesetzt wird, auf die Zilienschlagfrequenz analysiert. Es konnte gezeigt werden, dass beide Substanzen den Zilienschlag im Atemwegsmodell erh{\"o}hen. Zur Generierung der Testsysteme der beiden seltenen Erkrankungen CF und PCD wurden Epithelzellen der betroffenen Patienten zun{\"a}chst mittels nicht-invasiver Raman-Spektroskopie auf einen potentiellen Biomarker untersucht, welcher Einsatz in der Diagnostik der beiden Krankheiten finden k{\"o}nnte. Es konnte jedoch weder f{\"u}r die CF noch f{\"u}r die PCD ein Biomarker aufgedeckt werden. Jedoch zeigten PCD-Zellen eine geringe Auftrennung gegen{\"u}ber nicht-PCD Zellen. Anschließend wurden 3D-Atemwegstestsysteme basierend auf Patientenzellen aufgebaut. Der Ph{\"a}notyp der CF-Modelle wurde mittels immunhistologischer F{\"a}rbung und der Analyse des gest{\"o}rten mukozili{\"a}ren Transports verifiziert. Strukturelle zili{\"a}re Defekte konnten durch die ultrastrukturelle Analyse von Zilienquerschnitten in drei donorspezifischen PCD-Modellen identifiziert werden. Dar{\"u}ber hinaus konnte die zili{\"a}re Funktionalit{\"a}t mit Hilfe der Hochgeschwindigkeitsvideomikroskopie nicht nachgewiesen werden. Zusammenfassend ist es in dieser Arbeit gelungen, eine neue Methode zur vollst{\"a}ndigen Charakterisierung von 3D-Atemwegstestsystemen zu etablieren, die die Analyse der Zilienschlagfrequenz sowie des mukozili{\"a}ren Transports erm{\"o}glicht. Es konnte erstmalig gezeigt werden, dass mit Hilfe des Tissue Engineering ein personalisiertes Krankheitsmodell f{\"u}r die PCD auf Segmenten eines dezellularisierten porzinen Jejunums generiert werden kann, das zuk{\"u}nftig ein Testsystem f{\"u}r potentielle Therapeutika darstellen kann.},
  subject      = {In-vitro-Kultur},
  language  = {de}
}
@phdthesis{WeyhmuellerReboredo2014,
  author    = {Weyhm{\"u}ller Reboredo, Jenny},
  title     = {Tissue Engineering eines Meniskus - Vom Biomaterial zum Implantat},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-108477},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Der Meniskus, ein scheibenf{\"o}rmiger Faserknorpel, spielt im Kniegelenk eine bedeutende Rolle, weil er Kr{\"a}fte und Druck im Kniegelenk gleichm{\"a}ßig verteilt, St{\"o}ße d{\"a}mpft sowie der Kraft{\"u}bertragung und Stabilisierung dient. Durch die Entfernung des Gewebes, der sogenannten Totalmeniskektomie, nach einer Meniskusverletzung oder einem Riss, ver{\"a}ndern sich die mechanischen Eigenschaften des Gelenks stark und verursachen durch die erh{\"o}hte Belastung der Gelenkfl{\"a}chen Arthrose. Arthrose ist weltweit die H{\"a}ufigste aller Gelenkerkrankungen. Der Erhalt der k{\"o}rperlichen Leistungsf{\"a}higkeit und Mobilit{\"a}t bis ins hohe Alter sowie die Bewahrung der Gesundheit von Herz-Kreislauf- und Stoffwechselorganen z{\"a}hlen aufgrund des demografischen Wandels zu den großen medizinischen Herausforderungen. Die Erkrankung des muskuloskelettalen Systems stellte 2010 im Bundesgebiet die am h{\"a}ufigsten vorkommende Krankheitsart dar. W{\"a}hrend Risse in den {\"a}ußeren Teilen des Meniskus aufgrund des Anschlusses an das Blutgef{\"a}ßsystem spontan heilen k{\"o}nnen, k{\"o}nnen sie dies in tieferen Zonen nicht. Durch die begrenzte Heilungsf{\"a}higkeit des Knorpels bleibt langfristig der Einsatz eines Ersatzgewebes die einzige therapeutische Alternative. In der vorliegenden Arbeit wurde als therapeutische Alternative erfolgreich ein vaskularisiertes Meniskusersatzgewebe mit Methoden des Tissue Engineering entwickelt. Es soll in Zukunft als Implantat Verwendung finden. Tissue Engineering ist ein interdisziplin{\"a}res Forschungsfeld, in dem Gewebe außerhalb des K{\"o}rpers generiert werden. Schl{\"u}sselkomponenten sind Zellen, die aus einem Organismus isoliert werden, und Tr{\"a}gerstrukturen, die mit Zellen besiedelt werden. Die Biomaterialien geben den Zellen eine geeignete Umgebung, die die Extrazellul{\"a}re Matrix (EZM) ersetzen soll, um die Funktion der Zellen beizubehalten, eigene Matrix zu bilden. Zum Erhalt eines funktionelles Gewebes werden oftmals dynamische Kultursysteme, sogenannte Bioreaktoren, verwendet, die nat{\"u}rliche Stimuli wie beispielsweise den Blutfluss oder mechanische Kompressionskr{\"a}fte w{\"a}hrend der in vitro Reifungsphase des Gewebes, zur Verf{\"u}gung stellen. Das Gewebekonstrukt wurde auf Basis nat{\"u}rlicher Biomaterialien aufgebaut, unter Verwendung ausschließlich prim{\"a}rer Zellen, die sp{\"a}ter direkt vom Patienten gewonnen werden k{\"o}nnen und damit Abstoßungsreaktionen auszuschließen sind. Da der Meniskus teilvaskularisiert ist und die in vivo Situation des Gewebes bestm{\"o}glich nachgebaut werden sollte, wurden Konstrukte mit mehreren Zelltypen, sogenannte Ko-Kulturen aufgebaut. Neben mikrovaskul{\"a}ren Endothelzellen (mvEZ) und Meniskuszellen (MZ) erfolgten Versuche mit mesenchymalen Stammzellen (MSZ). Zur Bereitstellung einer zelltypspezifischen Matrixumgebung, diente den mvEZ ein St{\"u}ck Schweinedarm mit azellularisierten Gef{\"a}ßstrukturen (BioVaSc®) und den MZ diente eine geeig- nete Kollagenmatrix (Kollagen Typ I Hydrogel). Die Validierung und Charakterisierung des aufgebauten 3D Meniskuskonstrukts, welches in einem dynamischen Perfusions-Bioreaktorsystem kultiviert wurde, erfolgte mit knorpeltypischen Matrixmarkern wie Aggrekan, Kollagen Typ I, II und X sowie mit den Transkriptionsfaktoren RunX2 und Sox9, die in der Knorpelentstehung von großer Bedeutung sind. Zus{\"a}tzlich erfolgten Auswertungen mit endothelzellspezifischen Markern wie vWF, CD31 und VEGF, um die Vaskularisierung im Konstrukt nachzuweisen. Analysiert wurden auch die Zellvitalit{\"a}ten in den Konstrukten. Aufgrund einer nur geringen Verf{\"u}gbarkeit von MZ wurden Kulturans{\"a}tze mit alternativen Zellquellen, den MSZ, durchgef{\"u}hrt. Daf{\"u}r erfolgte zun{\"a}chst deren Isolation und Charakterisierung und die Auswahl einer geeigneten 3D Kollagenmatrix. Die beste Zellintegration der MSZ konnte auf einer eigens hergestellten elektrogesponnenen Matrix beobachtet werden. Die Matrix besteht aus zwei unterschiedlichen Kollagentypen, die auf insgesamt f{\"u}nf Schichten verteilt sind. Die Fasern besitzen weiter unterschiedliche Ausrichtungen. W{\"a}hrend die Kollagen Typ I Fasern in den {\"a}ußeren Schichten keiner Ausrichtung zugeh{\"o}ren, liegen die Kollagen Typ II Fasern in der mittleren Schicht parallel zueinander. Der native Meniskus war f{\"u}r den Aufbau einer solchen Kollagen-Tr{\"a}gerstruktur das nat{\"u}rliche Vorbild, das imitiert werden sollte. Nach der Besiedelung der Matrix mit MSZ, konnte eine Integration der Zellen bereits nach vier Tagen bis in die Mittelschicht sowie eine spontane chondrogene Differenzierung nach einer insgesamt dreiw{\"o}chigen Kultivierung gezeigt werden. Das Biomaterial stellt in Hinblick auf die Differenzierung der Zellen ohne die Zugabe von Wachstumsfaktoren eine relevante Bedeutung f{\"u}r klinische Studien dar. Zur Kultivierung des 3D Meniskuskonstrukts wurde ein Bioreaktor entwickelt. Mit diesem k{\"o}nnen neben Perfusion der Gef{\"a}ßsysteme zus{\"a}tzlich Kompressionskr{\"a}fte sowie Scherspannungen auf das Ersatzgewebe appliziert und die Differenzierung von MZ bzw. MSZ w{\"a}hrend der in vitro Kultur {\"u}ber mechanische Reize stimuliert werden. Ein anderes Anwendungsfeld f{\"u}r den neuartigen Bioreaktor ist seine Verwendung als Pr{\"u}ftestsystem f{\"u}r die Optimierung und Qualit{\"a}tssicherung von Gewebekonstrukten.},
  subject      = {Tissue Engineering},
  language  = {de}
}
@phdthesis{Lennartz2018,
  author    = {Lennartz, Simon},
  title     = {Tissue Engineering der menschlichen Speicheldr{\"u}se unter Verwendung von Epithel- und mikrovaskul{\"a}ren Endothelzellen auf einer Matrix aus dezellularisiertem Schweinedarm},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164116},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Eine ausgepr{\"a}gte Mundtrockenheit, Xerostomie, entsteht h{\"a}ufig durch eine irreversible Funktionseinschr{\"a}nkung der Speicheldr{\"u}sen. Diese ist unter anderem durch die Einnahme bestimmter Medikamente, Autoimmunerkrankungen, fortgeschrittenes Alter oder die Bestrahlungstherapie von Tumoren der Kopf-Hals-Region bedingt, wobei letztere eine der h{\"a}ufigsten Ursachen darstellt. Konsequenzen der eingeschr{\"a}nkten Dr{\"u}senfunktion sind herabgesetzte Speichelflussraten, eine Reduktion des Mund-pH-Werts, eine ver{\"a}nderte Elektrolyt- und Immunglobulin-Zusammensetzung des Speichels und somit eine Verringerung des Infektionsschutzes. Die resultierenden Komplikationen erstrecken sich von Karies und rezidivierenden Infektionen bis hin zu Pilzbesiedelungen der Mundschleimhaut. Diese schr{\"a}nken die Lebensqualit{\"a}t der Patienten stark ein und f{\"u}hren h{\"a}ufig zu Therapieunterbrechungen. Fast die H{\"a}lfte der Patienten leidet unter Depressionen oder psychischen Belastungszust{\"a}nden. Es gibt wenige Therapieans{\"a}tze zur Behandlung der postradiogenen Xerostomie: Pilocarpin erh{\"o}ht zwar die Speichelflussraten, hat jedoch keinen signifikanten Effekt auf die Lebensqualit{\"a}t. Die operative Translokation der Glandula submandibularis hat den Weg in die klinische Routine noch nicht gefunden, w{\"a}hrend die intensit{\"a}tsmodulierte Bestrahlung (IMRT) nicht f{\"u}r jeden Patienten geeignet ist; beide zeigen jedoch einen positiven Effekt auf die Lebensqualit{\"a}t. Gentechnische und stammzellbasierte Ans{\"a}tze zur Regeneration des Dr{\"u}sengewebes befinden sich im Experimentalstadium. Somit ergibt sich ein dringender Bedarf an innovativen Optionen zur Behandlung der postradiogenen Xerostomie. Das Tissue Engineering, die Erstellung einer k{\"u}nstlichen Speicheldr{\"u}se aus k{\"o}rpereigenen Zellen, b{\"o}te hier ein potentielles Behandlungskonzept. Diese Studie soll deshalb untersuchen, ob humane Speicheldr{\"u}senepithelzellen (hSEZ) auf einer Matrix aus dezellularisiertem, porzinem Jejunum, der sogenannten Small intestinal submucosa + mucosa (SIS-muc), kultiviert werden k{\"o}nnen. K{\"o}nnen die Zellen innerhalb der Wachstumsperiode wichtige physiologische Differenzierungsmarker beibehalten? Kann die Produktion von α-Amylase, einem der wichtigsten Enzyme des menschlichen Speichels, erhalten werden? Welchen Einfluss hat die Kokultur mit mikrovaskul{\"a}ren Endothelzellen (mvEZ)? Und zuletzt: Ist dezellularisierter Schweinedarm eine potentiell geeignete Matrix f{\"u}r das Tissue Engineering der menschlichen Speicheldr{\"u}se? Zun{\"a}chst erfolgte die Entnahme von humanem Speicheldr{\"u}sengewebe, woraus hSEZ isoliert wurden. Diese wurden dann sowohl in Mono- als auch in Kokultur mit mvEZ auf die SIS-muc aufgebracht und auf dieser kultiviert. Die SIS-muc wurde aus kurzen Schweinedarm-Segmenten gewonnen, die in einem mehrstufigen Verfahren dezellularisiert wurden. Die besiedelte SIS-muc wurde mittels konventioneller sowie Immunfluoreszenzf{\"a}rbungen, Raster- und Transmissionsektronenmikroskopie (REM/TEM) sowie quantitativer Polymerasekettenreaktion (qPCR) untersucht, dar{\"u}ber hinaus erfolgte die Messung der α-Amylase-Enzymaktivit{\"a}t. Histologisch sowie in der REM zeigte sich sowohl in der Mono- als auch in der Kokultur eine konfluente Besiedelung der SIS-muc mit hSEZ. In der Kokultur formten mvEZ einen Monolayer auf der serosalen Matrixseite. Bei der Charakterisierung der hSEZ zeigte sich in den Immunfluoreszenzaufnahmen eine starke Auspr{\"a}gung von Zytokeratin, α-Amylase und Aquaporin-5 und eine moderate Auspr{\"a}gung von Claudin-1. Bei der Untersuchung der Funktion der α-Amylase konnte in der Kokultur von hSEZ mit mvEZ eine im Gegensatz zur Mono- und 2D-Kultur signifikant erh{\"o}hte Enzymaktivit{\"a}t der α-Amylase nachgewiesen werden. In der qPCR-Analyse der α-Amylase-Genexpression war die 3D-Kultur der 2D-Kultur {\"u}berlegen. Die vorliegende Arbeit zeigt, dass die Kultur von hSEZ auf der SIS-muc m{\"o}glich ist. Es konnte nachgewiesen werden, dass die Zellen in 3D-Kultur spezifische Differenzierungsmerkmale beibehalten, die in der 2D-Kultur teils verloren gehen und dass hSEZ in Kokultur mit mvEZ eine gegen{\"u}ber der Monokultur signifikant erh{\"o}hte Produktion von α-Amylase aufweisen. Diese Arbeit liefert die Datengrundlage f{\"u}r zuk{\"u}nftige Studien im dynamischen Bioreaktor-Modell (BioVaSc), die auf dem Weg zur klinischen Translation notwendig sind. Somit stellt sie einen wichtigen Schritt in Richtung einer auf Tissue Engineering basierten Therapie der belastenden Xerostomie dar.},
  subject      = {Tissue Engineering},
  language  = {de}
}
@phdthesis{Wiesner2020,
  author    = {Wiesner, Miriam},
  title     = {Stem Cell-based Adipose Tissue Engineering - Engineering of Prevascularized Adipose Tissue Constructs In Vitro \& Investigation on Gap Junctional Intercellular Communication in Adipose-derived Stem Cells},
  doi       = {10.25972/OPUS-18500},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-185005},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {In reconstructive and plastic surgery, there exists a growing demand of adequate tissue implants, since currently available strategies for autologous transplantation are limited by complications including transplant failure and donor site morbidity. By developing in vitro and in vivo autologous substitutes for defective tissue sites, adipose tissue engineering can address these challenges, although there are several obstacles to overcome. One of the major limitations is the sufficient vascularization of in vitro engineered large constructs that remains crucial and demanding for functional tissues. Decellularized jejunal segments may represent a suitable scaffolding system with preexisting capillary structures that can be repopulated with human microvascular endothelial cells (hMVECs), and a luminal matrix applicable for the adipogenic differentiation of human adipose-derived stem cells (hASCs). Hence, co-culture of these cells in jejunal segments, utilizing a custom-made bioreactor system, was characterized in terms of vascularization and adipose tissue development. Substantial adipogenesis of hASCs was demonstrated within the jejunal lumen in contrast to non-induced controls, and the increase of key adipogenic markers was verified over time upon induction. The development of major extracellular matrix components of mature adipose tissue, such as laminin and collagen IV, was shown within the scaffold in induced samples. Successful reseeding of the vascular network with hMVECs was demonstrated in long-term culture and co-localization of vascular structures and adipogenically differentiated hASCs was observed. Therefore, these results represent a novel approach for in vitro engineering of vascularized adipose tissue constructs that warrants further investigations in preclinical studies. Another still existing obstacle in adipose tissue engineering is the insufficient knowledge about the applied cells, for instance the understanding of how cells can be optimally expanded and differentiated for successful engineering of tissue transplants. Even though hASCs can be easily isolated from liposuction of abdominal fat depots, yielding low donor site morbidity, huge numbers of cells are required to entirely seed complex and large 3D matrices or scaffolds. Thus, cells need to be large-scale expanded in vitro on the premise of not losing their differentiation capacity caused by replicative aging. Accordingly, an improved differentiation of hASCs in adipose tissue engineering approaches remains still desirable since most engineered constructs exhibit an inhomogeneous differentiation pattern. For mesenchymal stem cells (MSCs), it has been shown that growth factor application can lead to a significant improvement of both proliferation and differentiation capacity. Especially basic fibroblast growth factor (bFGF) represents a potent mitogen for MSCs, while maintaining or even promoting their osteogenic, chondrogenic and adipogenic differentiation potential. As there are currently different contradictory information present in literature about the applied bFGF concentration and the explicit effect of bFGF on ASC differentiation, here, the effect of bFGF on hASC proliferation and differentiation capacity was investigated at different concentrations and time points in 2D culture. Preculture of hASCs with bFGF prior to adipogenic induction showed a remarkable effect, whereas administration of bFGF during culture did not improve adipogenic differentiation capacity. Furthermore, the observations indicated as mode of action an impact of this preculture on cell proliferation capacity, resulting in increased cellular density at the time of adipogenic induction. The difference in cell density at this time point appeared to be pivotal for increased adipogenic capacity of the cells, which was confirmed in a further experiment employing different seeding densities. Interestingly, furthermore, the obtained results suggested a cell-cell contact-mediated mechanism positively influencing adipogenic differentiation. As a consequence, subsequently, studies were conducted focusing on intercellular communication of these cells, which has hardly been investigated to date. Despite the multitude of literature on the differentiation capacity of ASCs, little is reported about the physiological properties contributing to and controlling the process of lineage differentiation. Direct intercellular communication between adjacent cells via gap junctions has been shown to modulate differentiation processes in other cell types, with connexin 43 (Cx43) being the most abundant isoform of the gap junction-forming connexins. Thus, in the present study we focused on the expression of Cx43 and gap junctional intercellular communication (GJIC) in hASCs, and its significance for adipogenic differentiation of these cells. Cx43 expression in hASCs was demonstrated histologically and on the gene and protein expression level and was shown to be greatly positively influenced by cell seeding density. Functionality of gap junctions was proven by dye transfer analysis in growth medium. Adipogenic differentiation of hASCs was shown to be also distinctly elevated at higher cell seeding densities. Inhibition of GJIC by 18α-glycyrrhetinic acid significantly compromised adipogenic differentiation, as demonstrated by histology, triglyceride quantification, and adipogenic marker gene expression. Flow cytometry analysis showed a lower proportion of cells undergoing adipogenesis when GJIC was inhibited, further indicating the importance of GJIC in the differentiation process. Altogether, these results demonstrate the impact of direct cell-cell communication via gap junctions on the adipogenic differentiation process of hASCs and may contribute to further integrate direct intercellular crosstalk in rationales for tissue engineering approaches.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Gensler2023,
  author    = {Gensler, Marius E.},
  title     = {Simultaneous printing of tissue and customized bioreactor},
  doi       = {10.25972/OPUS-28019},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280190},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {Additive manufacturing processes such as 3D printing are booming in the industry due to their high degree of freedom in terms of geometric shapes and available materials. Focusing on patient-specific medicine, 3D printing has also proven useful in the Life Sciences, where it exploits the shape fidelity for individualized tissues in the field of bioprinting. In parallel, the current systems of bioreactor technology have adapted to the new manufacturing technology as well and 3D-printed bioreactors are increasingly being developed. For the first time, this work combines the manufacturing of the tissue and a tailored bioreactor, significantly streamlining the overall process and optimally merging the two processes. This way the production of the tissues can be individualized by customizing the reactor to the tissue and the patient-specific wound geometry. For this reason, a common basis and guideline for the cross-device and cross-material use of 3D printers was created initially. Their applicability was demonstrated by the iterative development of a perfusable bioreactor system, made from polydimethylsiloxane (PDMS) and a lignin-based filament, into which a biological tissue of flexible shape can be bioprinted. Cost-effective bioink-replacements and in silico computational fluid dynamics simulations were used for material sustainability and shape development. Also, nutrient distribution and shear stress could be predicted in this way pre-experimentally. As a proof of functionality and adaptability of the reactor, tissues made from a nanocellulose-based Cellink® Bioink, as well as an alginate-based ink mixed with Me-PMeOx100-b-PnPrOzi100-EIP (POx) (Alginate-POx bioink) were successfully cultured dynamically in the bioreactor together with C2C12 cell line. Tissue maturation was further demonstrated using hMSC which were successfully induced to adipocyte differentiation. For further standardization, a mobile electrical device for automated media exchange was developed, improving handling in the laboratory and thus reduces the probability of contamination.},
  subject      = {3 D bioprinting},
  language  = {en}
}
@phdthesis{Boeck2018,
  author    = {B{\"o}ck, Thomas},
  title     = {Multifunctional Hyaluronic Acid / Poly(glycidol) Hydrogels for Cartilage Regeneration Using Mesenchymal Stromal Cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155345},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Improved treatment options for the degenerative joint disease osteoarthritis (OA) are of major interest, since OA is one of the main sources of disability, pain, and socioeconomic burden worldwide [202]. According to epidemiological data, already 27 million people suffer from OA in the US [23]. Moreover, the WHO expects OA to be the fourth most common cause of disability in 2020 [203], illustrating the need for effective and long-lasting therapy options of severe cartilage defects. Despite numerous clinically available products for the treatment of cartilage defects [62], the development of more cartilage-specific materials is still at the beginning. Hyaluronic acid (HA) is a major component of the cartilaginous extracellular matrix (ECM) and inherently creates a cell-friendly niche by providing cell attachment and migration sites. Furthermore, it is known that the functional groups of HA are well suited for chemical modification. These characteristics render HA an attractive material for hydrogel-based tissue engineering approaches. Poly(glycidol) (PG) as chemical crosslinker basically features similar chemical characteristics as the widely used poly(ethylene glycol) (PEG), but provides additional side groups at each repeating unit that can be further chemically functionalized. With the introduction of PG as multifunctional crosslinker for HA gels, a higher cross-linking density and, accordingly, a greater potential for biomimetic functionalization may be achieved. However, despite the mentioned potential benefits, PG has not been used for cartilage regeneration approaches so far. The initial aim of the study was to set up and optimize a HA-based hydrogel for the chondrogenic differentiation of mesenchymal stromal cells (MSCs), using different amounts and variations of cross-linkers. Therefore, the hydrogel composition was optimized by the utilization of different PEG diacrylate (PEGDA) concentrations to cross-link thiol-modified HA (Glycosil, HA-SH) via Michael addition. We aimed to generate volumestable scaffolds that simultaneously enable a maximum of ECM deposition. Histological and biochemical analysis showed 0.4\% PEGDA as the most suitable concentration for these requirements (Section 5.1.2). In order to evaluate the impact of a differently designed cross-linker on MSC chondrogenesis, HA-SH was cross-linked with PEGTA (0.6\%) and compared to PEGDA (0.4\%) in a next step. Following this, acrylated PG (PG-Acr) as multifunctional cross-linker alternative to acrylated PEG was evaluated. It provides around five times more functional groups when utilized in PG-Acr (0.6\%) HA-SH hydrogels compared to PEGTA (0.6\%) HA-SH hydrogels, thus enabling higher degrees of biomimetic functionalization. Determination of cartilage-specific ECM components showed no substantial differences between both cross-linkers while the deposition of cartilaginous matrix appeared more homogeneous in HA-SH PG-Acr gels. Taken together, we were able to successfully increase the possibilities for biomimetic functionalization in the developed HA-SH hydrogel system by the introduction of PG-Acr as cross-linker without negatively affecting MSC chondrogenesis (Section 5.1.3). The next part of this thesis focused extensively on the biomimetic functionalization of PG-Acr (0.6\%) cross-linked HA-SH hydrogels. Here, either biomimetic peptides or a chondrogenic growth factor were covalently bound into the hydrogels. Interestingly, the incorporation of a N-cadherin mimetic (HAV), a collagen type II binding (KLER), or a cell adhesion-mediating peptide (RGD) yielded no improvement of MSC chondrogenesis. For instance, the covalent binding of 2.5mM HAV changed morphology of cell nuclei and reduced GAG production while the incorporation of 1.0mM RGD impaired collagen production. These findings may be attributed to the already supportive conditions of the employed HA-based hydrogels for chondrogenic differentiation. Most of the previous studies reporting positive peptide effects on chondrogenesis have been carried out in less supportive PEG hydrogels or in significantly stiffer MeHA-based hydrogels [99, 101, 160]. Thus, the incorporation of peptides may be more important under unfavorable conditions while inert gel systems may be useful for studying single peptide effects (Section 5.2.1). The chondrogenic factor transforming growth factor beta 1 (TGF-b1) served as an example for growth factor binding to PG-Acr. The utilization of covalently bound TGF-b1 may thereby help overcome the need for repeated administration of TGF-b1 in in vivo applications, which may be an advantage for potential clinical application. Thus, the effect of covalently incorporated TGF-b1 was compared to the effect of the same amount of TGF-b1 without covalent binding (100nM TGF-b1) on MSC chondrogenesis. It was successfully demonstrated that covalent incorporation of TGF-b1 had a significant positive effect in a dose-dependent manner. Chondrogenesis of MSCs in hydrogels with covalently bound TGF-b1 showed enhanced levels of chondrogenesis compared to hydrogels into which TGF-b1 was merely mixed, as shown by stronger staining for GAGs, total collagen, aggrecan and collagen type II. Biochemical evaluation of GAG and collagen amounts, as well as Western blot analysis confirmed the histological results. Furthermore, the positive effect of covalently bound TGF-b1 was shown by increased expression of chondrogenic marker genes COL2A1, ACAN and SOX9. In summary, covalent growth factor incorporation utilizing PG-Acr as cross-linker demonstrated significant positive effects on chondrogenic differentiation of MSCs (Section 5.2.2). In general, PG-Acr cross-linked HA hydrogels generated by Michael addition represent a versatile hydrogel platform due to their high degree of acrylate functionality. These hydrogels may further offer the opportunity to combine several biological modifications, such as the incorporation of biomimetic peptides together with growth factors, within one cell carrier. A proof-of-principle experiment demonstrated the suitability of pure PG gels for studying single peptide effects. Here, the hydrogels were generated by the utilization of thiol-ene-click reaction. In this setting, without the supportive background of hyaluronic acid, MSCs showed enhanced chondrogenic differentiation in response to the incorporation of 1.0mM HAV. This was demonstrated by staining for GAGs, the cartilage-specific ECM molecules aggrecan and type II collagen, and by increased GAG and total collagen amounts shown by biochemical analysis. Thus, pure PG gels exhibit the potential to study the effects and interplay of peptides and growth factors in a highly modifiable, bioinert hydrogel environment. The last section of the thesis was carried out as part of the EU project HydroZONES that aims to develop and generate zonal constructs. The importance of zonal organization has attracted increased attention in the last years [127, 128], however, it is still underrepresented in tissue engineering approaches so far. Thus, the feasibility of zonal distribution of cells in a scaffold combining two differently composed hydrogels was investigated. A HA-SH(FMZ) containing bottom layer was generated and a pure PG top layer was subsequently cast on top of it, utilizing both times thiol-ene-click reaction. Indeed, stable, hierarchical constructs were generated that allowed encapsulated MSCs to differentiate chondrogenically in both zones as shown by staining for GAGs and collagen type II, and by quantification of GAG amount. Thus, the feasibility of differently composed zonal hydrogels utilizing PG as a main component was successfully demonstrated (Section 5.4). With the first-time utilization and evaluation of PG-Acr as versatile multifunctional cross-linker for the preparation of Michael addition-generated HA-SH hydrogels in the context of cartilage tissue engineering, a highly modifiable HA-based hydrogel system was introduced. It may be used in future studies as an easily applicable and versatile toolbox for the generation of biomimetically functionalized hydrogels for cell-based cartilage regeneration. The introduction of reinforcement structures to enhance mechanical resistance may thereby further increase the potential of this system for clinical applications. Additionally, it was also demonstrated that thiol-ene clickable hydrogels can be used for the generation of cell-laden, pure PG gels or for the generation of more complex, coherent zonal constructs. Furthermore, thiol-ene clickable PG hydrogels have already been further modified and successfully been used in 3D bioprinting experiments [204]. 3D bioprinting, as part of the evolving biofabrication field [205], offers the possibilities to generate complex and hierarchical structures, and to exactly position defined layers, yet at the same time alters the requirements for the utilized hydrogels [159, 206-209]. Since a robust chondrogenesis of MSCs was demonstrated in the thiol-ene clickable hydrogel systems, they may serve as a basis for the development of hydrogels as so called bioinks which may be utilized in more sophisticated biofabrication processes.},
  subject      = {Hyalurons{\"a}ure},
  language  = {en}
}
@phdthesis{Berberich2024,
  author    = {Berberich, Oliver},
  title     = {Lateral Cartilage Tissue Integration - Evaluation of Bonding Strength and Tissue Integration \(in\) \(vitro\) Utilizing Biomaterials and Adhesives},
  doi       = {10.25972/OPUS-34602},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-346028},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Articular cartilage defects represent one of the most challenging clinical problem for orthopedic surgeons and cartilage damage after trauma can result in debilitating joint pain, functional impairment and in the long-term development of osteoarthritis. The lateral cartilage-cartilage integration is crucial for the long-term success and to prevent further tissue degeneration. Tissue adhesives and sealants are becoming increasingly more popular and can be a beneficial approach in fostering tissue integration, particularly in tissues like cartilage where alternative techniques, such as suturing, would instead introduce further damage. However, adhesive materials still require optimization regarding the maximization of adhesion strength on the one hand and long-term tissue integration on the other hand. In vitro models can be a valuable support in the investigation of potential candidates and their functional mechanisms. For the conducted experiments within this work, an in vitro disc/ring model obtained from porcine articular cartilage tissue was established. In addition to qualitative evaluation of regeneration, this model facilitates the implementation of biomechanical tests to quantify cartilage integration strength. Construct harvesting for histology and other evaluation methods could be standardized and is ethically less questionable compared to in vivo testing. The opportunity of cell culture technique application for the in vitro model allowed a better understanding of cartilage integration processes. Tissue bonding requires chemical or physical interaction of the adhesive material and the substrate. Adhesive hydrogels can bind to the defect interface and simultaneously fill the gap of irregularly shaped defect voids. Fibrin gels are derived from the physiological blood-clot formation and are clinically applied for wound closure. Within this work, comparisons of different fibrin glue formulations with the commercial BioGlue® were assessed, which highlighted the need for good biocompatibility when applied on cartilage tissue in order to achieve satisfying long-term integration. Fibrin gel formulations can be adapted with regard to their long-term stability and when applied on cartilage disc/ring constructs improved integrative repair is observable. The kinetic of repairing processes was investigated in fibrin-treated cartilage composites as part of this work. After three days in vitro cultivation, deposited extracellular matrix (ECM) was obvious at the glued interface that increased further over time. Interfacial cell invasion from the surrounding native cartilage was detected from day ten of tissue culture. The ECM formation relies on molecular factors, e.g., as was shown representatively for ascorbic acid, and contributes to increasing integration strengths over time. The experiments performed with fibrin revealed that the treatment with a biocompatible adhesive that allows cartilage neosynthesis favors lateral cartilage integration in the long term. However, fibrin has limited immediate bonding strength, which is disadvantageous for use on articular cartilage that is subject to high mechanical stress. The continuing aim of this thesis was to further develop adhesive mechanisms and new adhesive hydrogels that retain the positive properties of fibrin but have an increased immediate bonding strength. Two different photochemical approaches with the advantage of on-demand bonding were tested. Such treatment potentially eases the application for the professional user. First, an UV light induced crosslinking mechanism was transferred to fibrin glue to provide additional bonding strength. For this, the cartilage surface was functionalized with highly reactive light-sensitive diazirine groups, which allowed additional covalent bonds to the fibrin matrix and thus increased the adhesive strength. However, the disadvantages of this approach were the multi-step bonding reactions, the need for enzymatic pretreatment of the cartilage, expensive reagents, potential UV-light damage, and potential toxicity hazards. Due to the mentioned disadvantages, no further experiments, including long-term culture, were carried out. A second photosensitive approach focused on blue light induced crosslinking of fibrinogen (RuFib) via a photoinitiator molecule instead of using thrombin as a crosslinking mediator like in normal fibrin glue. The used ruthenium complex allowed inter- and intramolecular dityrosine binding of fibrinogen molecules. The advantage of this method is a one-step curing of fibrinogen via visible light that further achieved higher adhesive strengths than fibrin. In contrast to diazirine functionalization of cartilage, the ruthenium complex is of less toxicological concern. However, after in vitro cultivation of the disc/ring constructs, there was a decrease in integration strength. Compared to fibrin, a reduced cartilage synthesis was observed at the defect. It is also disadvantageous that a direct adjustment of the adhesive can only be made via protein concentration, since fibrinogen is a natural protein that has a fixed number of tyrosine binding sites without chemical modification. An additional cartilage adhesive was developed that is based on a mussel-inspired adhesive mechanism in which reactivity to a variety of substrates is enabled via free DOPA amino acids. DOPA-based adhesion is known to function in moist environments, a major advantage for application on water-rich cartilage tissue surrounded by synovial liquid. Reactive DOPA groups were synthetically attached to a polymer, here POx, to allow easy chemical modifiability, e.g. insertion of hydrolyzable ester motifs for tunable degradation. The possibility of preparing an adhesive hybrid hydrogel of POx in combination with fibrinogen led to good cell compatibility as was similarly observed with fibrin, but with increased immediate adhesive strength. Degradation could be adjusted by the amount of ester linkages on the POx and a direct influence of degradation rates on the development of integration in the in vitro model could be shown. Hydrogels are well suited to fill defect gaps and immediate integration can be achieved via adhesive properties. The results obtained show that for the success of long-term integration, a good ability of the adhesive to take up synthesized ECM components and cells to enable regeneration is required. The degradation kinetics of the adhesive must match the remodeling process to avoid intermediate loss of integration power and to allow long-term firm adhesion to the native tissue. Hydrogels are not only important as adhesives for smaller lesions, but also for filling large defect volumes and populating them with cells to produce tissue engineered cartilage. Many different hydrogel types suitable for cartilage synthesis are reported in the literature. A long-term stable fibrin formulation was tested in this work not only as an adhesive but also as a bulk hydrogel construct. Agarose is also a material widely used in cartilage tissue engineering that has shown good cartilage neosynthesis and was included in integration assessment. In addition, a synthetic hyaluronic acid-based hydrogel (HA SH/P(AGE/G)) was used. The disc/ring construct was adapted for such experiments and the inner lumen of the cartilage ring was filled with the respective hydrogel. In contrast to agarose, fibrin and HA-SH/P(AGE/G) gels have a crosslink mechanism that led to immediate bonding upon contact with cartilage during curing. The enhanced cartilage neosynthesis in agarose compared to the other hydrogel types resulted in improved integration during in vitro culture. This shows that for the long-term success of a treatment, remodeling of the hydrogel into functional cartilage tissue is a very high priority. In order to successfully treat larger cartilage defects with hydrogels, new materials with these properties in combination with chemical modifiability and a direct adhesion mechanism are one of the most promising approaches.},
  subject      = {Knorpel},
  language  = {en}
}
@phdthesis{Wallstabe2020,
  author    = {Wallstabe, Julia},
  title     = {Induktion von GvHD-artigen Gewebesch{\"a}den an humanen artifiziellen Hautmodellen},
  doi       = {10.25972/OPUS-15396},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-153966},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {Graft-versus-Host Disease (GvHD) stellt einen h{\"a}ufigen, den Gesamterfolg einer allogenen h{\"a}matopoetischen Stammzelltransplantation limitierenden Faktor dar. Bei dieser Komplikation attackieren vor allem alloreaktive T-Lymphozyten des Stammzellspenders gesunde K{\"o}rperzellen des Patienten. Infolgedessen kommt es zu Gewebesch{\"a}den in den Zielorganen Haut, Leber und Darm. Die Behandlung der GvHD erfordert eine effektive Immunsuppression, was wiederum Graft-versusTumor-Effekte kompromittiert und den R{\"u}ckfall der malignen Grunderkrankung bedingen kann. Viele Patienten sprechen aus bisher ungekl{\"a}rten Gr{\"u}nden nicht auf die klassische immunsuppressive Therapie mit Steroiden oder second-line Therapien an. Neue zellul{\"a}re Therapien zur Behandlung der refrakt{\"a}ren GvHD sind auf dem Vormarsch, bed{\"u}rfen aber einer weiterf{\"u}hrenden klinischen Testung, auch um die exakten Wirkungsmechanismen zu verstehen. Idealerweise k{\"o}nnten neue Testsysteme das GvHD-Potential von allogenen Stammzellpr{\"a}paraten oder aber das immunsuppressive Potential von neuen GvHD-Therapien vorhersagen, bevor diese in klinischen Studien eingesetzt werden. Ziel der vorliegenden Arbeit war es, ein erstes, in multiplen Replikaten einsetzbares, humanes organotypisches Gewebemodell zur Simulation einer GvHD-Reaktion am Beispiel der Haut zu etablieren. Zu diesem Zweck wurden artifizielle humane Hautmodelle unter statischen (KollagenHautmodelle) und dynamischen Kulturbedingungen (vaskularisierte Hautmodelle) generiert. Die Injektion unstimulierter PBMCs (engl. peripheral blood mononuclear cells) f{\"u}hrte zu keinen histomorphologischen Ver{\"a}nderungen in den KollagenHautmodellen. Im Gegensatz dazu hatte die Injektion vorstimulierter allogener PBMCs eine Zerst{\"o}rung der epidermalen Strukturen der Kollagen-Hautmodelle zur Folge, welche vergleichbar waren mit Gewebesch{\"a}den bei einer akuten GvHD der Haut. Dieselben Sch{\"a}digungen der Epidermis wurden durch die Injektion von Medium{\"u}berst{\"a}nden vorstimulierter PBMCs in die Kollagen-Hautmodelle erreicht. Im Kulturmedium der Kollagen-Hautmodelle wurden hohe Konzentrationen von Interleukin 2 und 17, Interferon gamma sowie Tumornekrosefaktor alpha gemessen, wodurch auf die Beteiligung von Zytokinen an der inflammatorischen Reaktion geschlossen werden konnte. Auch im komplexeren vaskularisierten Hautmodell verursachte die Injektion vorstimulierter PBMCs histomorphologische Ver{\"a}nderungen entsprechend einer akuten Haut-GvHD sowie einen zeitabh{\"a}ngigen Anstieg proinflammatorischer Zytokine. Zusammenfassend zeigen die Resultate dieser Arbeit, dass die Induktion einer starken Inflammations- und Immunreaktion in artifiziellen humanen Hautmodellen, welche histomorphologisch eine GvHD imitiert, m{\"o}glich ist. Dieses Modell k{\"o}nnte als Grundlage f{\"u}r die Entwicklung eines klinisch relevanten Testsystems zur Bestimmung des GvHD-Restpotentials oder zur Festlegung der immunsuppressiven Kapazit{\"a}t innovativer Zellpr{\"a}parate dienen. Somit k{\"o}nnten humane artifizielle GvHDModelle in klinischen Studien eingesetzt werden und die Erfahrungen aus Tiermodellen erg{\"a}nzen sowie erste in vitro Ergebnisse im humanen System liefern, welche dann mit dem tats{\"a}chlichen klinischen Resultat verglichen werden k{\"o}nnten.},
  subject      = {Graft-versus-host-disease},
  language  = {de}
}