@article{DongKuzmanoskiWehneretal.2017, author = {Dong, Hailong and Kuzmanoski, Ana and Wehner, Tobias and Mueller-Buschbaum, Klaus and Feldmann, Claus}, title = {Microwave-assisted polyol synthesis of water dispersible red-emitting Eu\(^{3+}\)-modified carbon dots}, series = {Materials}, volume = {10}, journal = {Materials}, doi = {10.3390/ma10010025}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-181674}, year = {2017}, abstract = {Eu\(^{3+}\)-modified carbon dots (C-dots), 3-5 nm in diameter, were prepared, functionalized, and stabilized via a one-pot polyol synthesis. The role of Eu\(^{2+}\)/Eu\(^{3+}\), the influence of O\(_2\) (oxidation) and H\(_2\)O (hydrolysis), as well as the impact of the heating procedure (conventional resistance heating and microwave (MW) heating) were explored. With the reducing conditions of the polyol at the elevated temperature of synthesis (200-230 °C), first of all, Eu\(^{2+}\) was obtained resulting in the blue emission of the C-dots. Subsequent to O\(_2\)-driven oxidation, Eu\(^{3+}\)-modified, red-emitting C-dots were realized. However, the Eu\(^{3+}\) emission is rapidly quenched by water for C-dots prepared via conventional resistance heating. In contrast to the hydroxyl functionalization of conventionally-heated C-dots, MW-heating results in a carboxylate functionalization of the C-dots. Carboxylate-coordinated Eu\(^{3+}\), however, turned out as highly stable even in water. Based on this fundamental understanding of synthesis and material, in sum, a one-pot polyol approach is established that results in H\(_2\)O-dispersable C-dots with intense red Eu\(^{3+}\)-line-type emission.}, language = {en} } @article{HaerterichMatlerDewhurstetal.2023, author = {H{\"a}rterich, Marcel and Matler, Alexander and Dewhurst, Rian D. and Sachs, Andreas and Oppel, Kai and Stoy, Andreas and Braunschweig, Holger}, title = {A step-for-step main-group replica of the Fischer carbene synthesis at a borylene carbonyl}, series = {Nature Communications}, volume = {14}, journal = {Nature Communications}, doi = {10.1038/s41467-023-36251-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-357270}, year = {2023}, abstract = {The Fischer carbene synthesis, involving the conversion of a transition metal (TM)-bound CO ligand to a carbene ligand of the form [=C(OR')R] (R, R' = organyl groups), is one of the seminal reactions in the history of organometallic chemistry. Carbonyl complexes of p-block elements, of the form [E(CO)n] (E = main-group fragment), are much less abundant than their TM cousins; this scarcity and the general instability of low-valent p-block species means that replicating the historical reactions of TM carbonyls is often very difficult. Here we present a step-for-step replica of the Fischer carbene synthesis at a borylene carbonyl involving nucleophilic attack at the carbonyl carbon followed by electrophilic quenching at the resultant acylate oxygen atom. These reactions provide borylene acylates and alkoxy-/silyloxy-substituted alkylideneboranes, main-group analogues of the archetypal transition metal acylate and Fischer carbene families, respectively. When either the incoming electrophile or the boron center has a modest steric profile, the electrophile instead attacks at the boron atom, leading to carbene-stabilized acylboranes - boron analogues of the well-known transition metal acyl complexes. These results constitute faithful main-group replicas of a number of historical organometallic processes and pave the way to further advances in the field of main-group metallomimetics.}, language = {en} } @phdthesis{Maier2024, author = {Maier, Matthias}, title = {Inorganic and Inorganic-Organic Hybrid Polymers Containing BN Units in the Main Chain}, doi = {10.25972/OPUS-35153}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-351536}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {π-Conjugated organic polymers have attracted tremendous attention in the last decades, and the interest in these materials is mainly driven by their applicability in next-generation electronic and optoelectronic devices (OLEDs, OFETs, photovoltaics). The partial or complete replacement of carbon atoms by main group elements in conjugated polymers can significantly change the characteristics and applications of these macromolecules. In this work, a class of inorganic polymers comprising a backbone of exclusively boron and nitrogen atoms (poly(iminoborane)s, PIBs) and their monodisperse oligomers is described. In addition, novel inorganic-organic hybrid polymers containing BN units in their polymer backbone were synthesized and characterized. In chapter 2.1, the development of catalytic B-N coupling routes for the controlled synthesis of macromolecular materials is described. While the reaction of an N-silyl-B-chloro-aminoborane with the electrophilic reagent trimethylsilyl triflate led to effective B-N coupling, the reaction with a silver(I) salt resulted in an intramolecular Cl/Me exchange between the boron and silicon centers. In chapter 2.2-2.4, the study of oligo- and poly(iminoborane)s is discussed. Monodisperse and cyclolinear oligo(iminoborane)s based on diazaborolidines with up to 7 boron and 8 nitrogen atoms were synthesized by successively extending the B-N main chain. However, the use of benzodiazaborolines only led to limited BN catenation. Furthermore, the redistribution processes resulting from the reaction of longer oligomers with non-stoichiometric amounts of (di)halogenated boranes is reported. In chapter 2.5-2.6, the synthesis of 1,2,5-azadiborolanes as building blocks for the synthesis of poly(iminoborane)s and inorganic-organic hybrid polymers is described. While the attempt to apply an azadiborolane with sterically demanding groups on the boron-bridging ethylene unit for the construction of PIB was unfeasible, it was successfully incorporated in inorganic-organic hybrid polymers. Photophysical studies indicated π-conjugation along the polymer chain. A first attempt to synthesize PIBs based on azadiborolanes with unsubstituted ethylene units showed promising results. In chapter 2.7-2.8, a comprehensive study of poly(arylene iminoborane)s, which are BN analogs of poly(arylene vinylene)s is described, and the properties of four polymers as well as twelve monodisperse oligomers were investigated. Photophysical investigations of the monomers, dimers and polymers showed a systematic bathochromic shift of the absorption maximum with increasing chain length and thiophene content. Based on TD-DFT calculations of the model oligomers, the lowest-energy absorption band could be assigned to HOMO to LUMO transitions with π-π* character. The oligo- and poly(arylene iminoborane)s showed only very weak to no emission in solution but they were emissive in the solid state. For four oligomers the aggregation induced emission (AIE) in a THF/water mixture was investigated and DLS studies confirmed the formation of nanoaggregates. In chapter 2.9, oligo- and polymerizations of sulfur-containing building blocks and subsequent pH-triggered degradation of the products is described. While a sulfilimine-containing oligomer could not be isolated, the sulfone-, sulfoximine-, and sulfoxide-containing molecular oligomers and polymers could be successfully synthesized by B=N or B-O bond formation reactions. The sulfur-containing building blocks were successfully released under acidic or basic conditions, which was confirmed by NMR spectroscopy and mass spectrometry.}, subject = {Anorganische Polymere}, language = {en} } @article{TumirPavlovićSaftićCrnolatacetal.2023, author = {Tumir, Lidija-Marija and Pavlović Saftić, Dijana and Crnolatac, Ivo and Ban, Željka and Maslać, Matea and Griesbeck, Stefanie and Marder, Todd B. and Piantanida, Ivo}, title = {The nature of the (oligo/hetero)arene linker connecting two triarylborane cations controls fluorimetric and circular dichroism sensing of various ds-DNAs and ds-RNAs}, series = {Molecules}, volume = {28}, journal = {Molecules}, number = {11}, issn = {1420-3049}, doi = {10.3390/molecules28114348}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319322}, year = {2023}, abstract = {A series of tetracationic bis-triarylborane dyes, differing in the aromatic linker connecting two dicationic triarylborane moieties, showed very high submicromolar affinities toward ds-DNA and ds-RNA. The linker strongly influenced the emissive properties of triarylborane cations and controlled the fluorimetric response of dyes. The fluorene-analog shows the most selective fluorescence response between AT-DNA, GC-DNA, and AU-RNA, the pyrene-analog's emission is non-selectively enhanced by all DNA/RNA, and the dithienyl-diketopyrrolopyrrole analog's emission is strongly quenched upon DNA/RNA binding. The emission properties of the biphenyl-analog were not applicable, but the compound showed specific induced circular dichroism (ICD) signals only for AT-sequence-containing ds-DNAs, whereas the pyrene-analog ICD signals were specific for AT-DNA with respect to GC-DNA, and also recognized AU-RNA by giving a different ICD pattern from that observed upon interaction with AT-DNA. The fluorene- and dithienyl-diketopyrrolopyrrole analogs were ICD-signal silent. Thus, fine-tuning of the aromatic linker properties connecting two triarylborane dications can be used for the dual sensing (fluorimetric and CD) of various ds-DNA/RNA secondary structures, depending on the steric properties of the DNA/RNA grooves.}, language = {en} } @phdthesis{Rumpel2024, author = {Rumpel, Matthias}, title = {Development of Components for Solid-State Batteries and their Characterization}, doi = {10.25972/OPUS-34715}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-347154}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far. These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated.}, subject = {Elektrochemie}, language = {en} } @article{KošćakPeharBožinovićetal.2022, author = {Košćak, Marta and Pehar, Isabela and Božinović, Ksenija and Kole, Goutam Kumar and Sobočanec, Sandra and Podgorski, Iva I. and Pinterić, Marija and M{\"u}ller-Buschbaum, Klaus and Majhen, Dragomira and Piantanida, Ivo and Marder, Todd B.}, title = {Para-N-methylpyridinium pyrenes: impact of positive charge on ds-DNA/RNA and protein recognition, photo-induced bioactivity, and intracellular localisation}, series = {Pharmaceutics}, volume = {14}, journal = {Pharmaceutics}, number = {11}, issn = {1999-4923}, doi = {10.3390/pharmaceutics14112499}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-297247}, year = {2022}, abstract = {The 2- and 2,7- substituted para-N-methylpyridinium pyrene cations show high-affinity intercalation into ds-DNAs, whereas their non-methylated analogues interacted with ds-DNA/RNA only in the protonated form (at pH 5), but not at physiological conditions (pH 7). The fluorescence from non-methylated analogues was strongly dependent on the protonation of the pyridines; consequently, they act as fluorescence ratiometric probes for simultaneous detection of both ds-DNA and BSA at pH 5, relying on the ratio between intensities at 420 nm (BSA specific) and 520 nm (DNA specific), whereby exclusively ds-DNA sensing could be switched-off by adjustment to pH 7. Only methylated, permanently charged pyrenes show photoinduced cleavage of circular DNA, attributed to pyrene-mediated irradiation-induced production of singlet oxygen. Consequently, the moderate toxicity of these cations against human cell lines is strongly increased upon irradiation. Detailed studies revealed increased total ROS production in cells treated by the compounds studied, accompanied by cell swelling and augmentation of cellular complexity. The most photo-active 2-para-N-methylpyridinium pyrene showed significant localization at mitochondria, its photo-bioactivity likely due to mitochondrial DNA damage. Other derivatives were mostly non-selectively distributed between various cytoplasmic organelles, thus being less photoactive.}, language = {en} } @article{TaniniPecchiIgnat’evetal.2022, author = {Tanini, Damiano and Pecchi, Tommaso and Ignat'ev, Nikolai V. and Capperucci, Antonella}, title = {Ionic liquids-assisted ring opening of three-membered heterocycles with thio- and seleno-silanes}, series = {Catalysts}, volume = {12}, journal = {Catalysts}, number = {10}, issn = {2073-4344}, doi = {10.3390/catal12101259}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-290350}, year = {2022}, abstract = {Ring opening reactions of strained heterocycles (epoxides, aziridines, thiiranes) by silyl chalcogenides, such as thiosilanes and selenosilanes, can be efficiently performed in a variety of ionic liquids, which can behave as reaction media and in some cases also as catalysts. This protocol enables an alternative access to β-functionalized sulfides and selenides under mild conditions.}, language = {en} } @phdthesis{Tendera2023, author = {Tendera, Lukas}, title = {NHC-ligated Nickel(0)-Complexes: Bond Activation, Redox Behavior and Catalysis}, doi = {10.25972/OPUS-29065}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-290654}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {This thesis describes the synthesis and reactivity of bis-NHC ligated nickel(0)-complexes and their application in catalytic cyclization and borylation reactions of alkynes. The focus of the presented work lies on the investigation of the electronic and steric impact of different NHC ligands on the reactivity and catalytic activity of [Ni(NHC)2] complexes. Since d10 ML2 complexes play a decisive role for numerous catalytic reactions, such as the Suzuki-Miyaura cross-coupling, the first chapter provides an overview about the general properties of NHCs and the chemistry of NHC-ligated nickel complexes, their synthesis, characterization, reactivity, and application in catalysis.}, subject = {{\"U}bergangsmetallkomplexe}, language = {en} } @phdthesis{Ricker2023, author = {Ricker, Robert}, title = {Synthesis, group 10 metal-catalyzed cyclization reactions and hydroboration of polyynes}, doi = {10.25972/OPUS-28680}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-286801}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.}, subject = {Polyine}, language = {en} } @phdthesis{Krebs2023, author = {Krebs, Johannes Heinrich}, title = {Investigation of Dicarba-closo-dodecaborane as a Substituent on Three-coordinate Boron and as an Acceptor in a Pyrene-Donor-Acceptor System}, doi = {10.25972/OPUS-28675}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-286758}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {1. Bis(1-(4-tolyl)-carboran-2-yl)-(4-tolyl)-borane, a new bis(o-carboranyl)-(R)-borane 1 was synthesised by lithiation of the o-carboranyl precursor and subsequent salt metathesis reaction with (4-tolyl)BBr2. Cyclic voltammetry experiments on 1 show multiple distinct reduction events with a one-electron first reduction. In a selective reduction experiment the corresponding paramagnetic radical anion 1•- was isolated and characterized. Single-crystal structure analyses allow an in-depth comparison of 1, 1•-, their calculated geometries, and the S1 excited state of 1. 2. The choice of backbone linker for ortho-bis-(9-borafluorene)s has a great influence on the LUMO located at the boron centers and therefore the reactivity of the respective compounds. Herein, we report the room temperature rearrangement of 1,2-bis-(9-borafluorenyl-)-ortho-carborane, C2B10H10-1,2-[B(C12H8)]2 ([2a]) featuring o-carborane as the inorganic three-dimensional backbone and the synthesis of 1,2-bis-(9-borafluorenyl-)benzene, C6H4-1,2-[B(C12H8)]2 (2b) its phenylene analog. DFT calculations on the transition state for the rearrangement support an intramolecular C-H bond activation process via an SEAr-like mechanism in [2a], and predicted that the same rearrangement would take place in 2b, but at elevated temperatures, which indeed proved to be the case. 3. We synthesized 4 a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane, continuing our research. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and TD-DFT calculations we compare o-carborane and the B(mes)2 (mes = 2,4,6-Me3C6H2) as acceptor groups and confirm the julolidine-like donor strength.}, subject = {closo-Borane}, language = {en} }