@phdthesis{Spitznagel2017,
  author    = {Spitznagel, Niko},
  title     = {Energy transfer during molten fuel coolant interaction},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142891},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {The contact of hot melt with liquid water - called Molten Fuel Coolant Interaction (MFCI) - can result in vivid explosions. Such explosions can occur in different scenarios: in steel or powerplants but also in volcanoes. Because of the possible dramatic consequences of such explosions an investigation of the explosion process is necessary. Fundamental basics of this process are already discovered and explained, such as the frame conditions for these explosions. It has been shown that energy transfer during an MFCI-process can be very high because of the transfer of thermal energy caused by positive feedback mechanisms. Up to now the influence of several varying parameters on the energy transfer and the explosions is not yet investigated sufficiently. An important parameter is the melt temperature, because the amount of possibly transferable energy depends on it. The investigation of this influence is the main aim of this work. Therefor metallic tin melt was used, because of its nearly constant thermal material properties in a wide temperature range. With tin melt research in the temperature range from 400 °C up to 1000 °C are possible. One important result is the lower temperature limit for vapor film stability in the experiments. For low melt temperatures up to about 600 °C the vapor film is so unstable that it already can collapse before the mechanical trigger. As expected the transferred thermal energy all in all increases with higher temperatures. Although this effect sometimes is superposed by other influences such as the premix of melt and water, the result is confirmed after a consequent filtering of the remaining influences. This trend is not only recognizable in the amount of transferred energy, but also in the fragmentation of melt or the vaporizing water. But also the other influences on MFCI-explosions showed interesting results in the frame of this work. To perform the experiments the installation and preparation of the experimental Setup in the laboratory were necessary. In order to compare the results to volcanism and to get a better investigation of the brittle fragmentation of melt additional runs with magmatic melt were made. In the results the thermal power during energy transfer could be estimated. Furthermore the model of "cooling fragments " could be usefully applied.},
  subject      = {Vulkanologie},
  language  = {en}
}
@phdthesis{Duerig2011,
  author    = {D{\"u}rig, Tobias},
  title     = {Fracture dynamics in silicate glasses},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73492},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Understanding the mechanisms of fragmentation within silicate melts is of great interest not only for material science, but also for volcanology, particularly regarding molten fuel coolant-interactions (MFCIs). Therefore edge-on hammer impact experiments (HIEs) have been carried out in order to analyze the fracture dynamics in well defined targets by applying a Cranz-Schardin highspeed camera technique. This thesis presents the corresponding results and provides a thorough insight into the dynamics of fragmentation, particularly focussing on the processes of energy dissipation. In HIEs two main classes of cracks can be identified, characterized by completely different fracture mechanisms: Shock wave induced "damage cracks" and "normal cracks", which are exclusively caused by shear-stresses. This dual fracture situation is taken into account by introducing a new concept, according to which the crack class-specific fracture energies are linearly correlated with the corresponding fracture areas. The respective proportionality constants - denoted "fracture surface energy densities" (FSEDs) - have been quantified for all studied targets under various constraints. By analyzing the corresponding high speed image sequences and introducing useful dynamic parameters it has been possible to specify and describe in detail the evolution of fractures and, moreover, to quantify the energy dissipation rates during the fragmentation. Additionally, comprehensive multivariate statistical analyses have been carried out which have revealed general dependencies of all relevant fracture parameters as well as characteristics of the resulting particles. As a result, an important principle of fracture dynamics has been found, referred to as the "local anisotropy effect": According to this principle, the fracture dynamics in a material is significantly affected by the location of directed stresses. High local stress gradients cause a more stable crack propagation and consequently a reduction of the energy dissipation rates. As a final step, this thesis focusses on the volcanological conclusions which can be drawn on the basis of the presented HIE results. Therefore fragments stemming from HIEs have been compared with natural and experimental volcanic ash particles of basaltic Grimsv{\"o}tn and rhyolitic Tepexitl melts. The results of these comparative particle analyses substantiate HIEs to be a very suitable method for reproducing the MFCI loading conditions in silicate melts and prove the FSED concept to be a model which is well transferable to volcanic fragmentation processes.},
  subject      = {Bruchmechanik},
  language  = {en}
}
@phdthesis{Gehring2001,
  author    = {Gehring, Iris},
  title     = {Volcanostratigraphy using geophysical methods on La Fossa di Vulcano (S-Italy)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1181941},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2001},
  abstract  = {For many active volcanoes all over the world a civil protection program, normally combined with hazard maps, exists. Optimising of hazard maps and the associated hazard assessment implies a detailed knowledge of the volcanostratigraphy, because the deposits provoke information on the potential behaviour during a new activity cycle. Pyroclastic deposits, however, may vary widely in thickness and distribution over very short lateral distances. High resolution characterisation of single strata often cannot be archived, if solely sedimentological and geochemical methods are used. Gamma-ray measurements taken in the field combined with grain-size depended magnetic susceptibility measurements made in the laboratory are used in this work to optimise the resolution of volcanostratigraphic investigations. The island of Vulcano is part of the Aeolian Archipelago sited of the northern coast of Sicily. La Fossa cone is the active centre of Vulcano, where fumarolic and seismic activity can be observed. The cone was built up during the last 6,000 years, whereby the last eruption period is dated to historic times (1888-1890). For the tuff cone La Fossa the most likely volcanic hazards are the emplacement of pyroclastic deposits as well as gas hazards (especially SOx and CO2), due to this the detailed knowledge of the stratigraphy is mandatory. Most of the population resides in Vulcano Porto and the nearby sited peninsula of Vulcanello, which are highly endangered locations for a future eruption scenario. Measurements, made in standard outcrops, allow a characterisation of the successions Punte Nere, Tufi Varicolori, Palizzi, Commenda, and Cratere Attuale. A discrimination of all successions by solely one of the methods is rarely possible. In some cases, however, the combination of the methods leads to clear results. It can also be noticed that the exposition as well as the sedimentation type (wet-surge or dry-surge deposits) affect the measurements. In general it can be assumed that the higher the magma is evolved the higher the g -ray values and the lower the susceptibility values. Measurements from the Wingertsberg (Laacher See deposits, Eifel, W-Germany) show clearly that a higher degree of magma evolution correlates with lower susceptibility and higher gamma-ray values. Variations of the values can be observed not only by the change of the degree of magmatic evolution but also by the inhomogeneous deposition conditions. Particularly the gamma-ray measurements show lower values for the wet-surge deposits than for the dry-surge deposits, even though the erupted material has the same geochemical composition. This can be explained especially by reactions inside of the moist eruption cloud and short-time after deposition, when easily soluble elements like K, U, and Th can be leached by these aggressive fluids. Even extended exposition and high water content can provoke depletion of various elements within the complete or parts of the outcrop, too. If the deposits are affected by a fumarolic activity especially the susceptibility values show significant variations, whereas in general extreme low values are observed. Contamination of deposits also can occur, if they are overlain by weathered deposits of higher concentration of K, U, and Th. Weathering and mobilisation within the upper deposits can generate an element enrichment within the lower deposits. In general the element ratios of the barried underlying deposits are less affected than the exposed ones. After gauging the values of the well defined succession for standard outcrops undefined outcrops were measured. These outcrops are not clearly classified by sedimentological and geochemical methods, thus a correlation with the combined geophysical methods is useful. In general the combination of the methods allows a correlation, although in some cases more than one interpretation is possible. But in connection with time marker horizons as well as sedimentological features an interpretation is feasible. These situations show that a classification solely based on geophysical methods is possible for many cases but, if the volcanic system is more complex, a combination with sedimentological and geochemical methods may be needed. The investigations on Vulcano, documented in this work, recommend a re-interpretation of the dispersial of some successions of La Fossa cone, especially the presumption that Tufi Varicolori only exist inside of the Caldera of La Fossa. As a consequence the eruption and energy model especially for Tufi Varicolori have to be reviewed.},
  subject      = {Vulcano},
  language  = {en}
}