@phdthesis{Tavakoli2014, author = {Tavakoli, Kia}, title = {Herstellung und Charakterisierung spintronischer und caloritronischer (Ga,Mn)As-Nanostrukturen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-103241}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Die elektronischen Bauteile, die aus unserer technischen Welt kaum wegzuddenken sind, werden immer kleiner. Aktuelle ICs bestehen zum Beispiel aus Milliarden von Transistoren, von denen jeder einzelne kleiner als 100nm (dem 100-stel des typischen Durchmessers eines Menschenhaars) ist. Dass die Entwicklung auch zuk{\"u}nftig weiter dem Trend des Mooreschen Gesetzes folgen wird, gilt hierbei als unbestritten. Die interessanteste Fragestellung der Halbleiter- und Nanostrukturforschung in diesem Zusammenhang ist: Kann man die weitere Entwicklung der Informations- und Kommunikationstechnik dadurch erreichen, dass man die Miniaturisierung der Transistoren in Mikroprozessoren und Speicherbauelementen weiter vorantreibt oder ist man auf g{\"a}nzlich neue Wege angewiesen? Bei der weitergehenden Miniaturisierung ist die gr{\"o}ßte H{\"u}rde darin zu suchen, ob man in der Lage sein wird die Verbrauchsleistung dieser Bauelemente weiter zu reduzieren, um die {\"U}berhitzung der Bauteile in den Griff zu bekommen und nicht zuletzt auch, um Energie zu sparen. Die heutige Elektronik hat ihre Grundlagen in den 60er Jahren. Diese Art der Elektronik ist jedoch hinsichtlich der Effizienzsteigerungen und vor allem der W{\"a}rmeentwicklung an ihre Grenzen gestoßen. Hauptursache f{\"u}r diese problematische W{\"a}rmeentwicklung sind die elektrischen Verbindungen, die die Informationen zwischen der halbleiterbasierten Datenverarbeitung und den metallischen Speicherelementen hin und hertransportieren. Obwohl diese elektrischen Verbindungen zum aktuellen Zeitpunkt aus der Computerarchitektur nicht weg zu denken sind, ist es eines der Hauptziele diese Verbindungen nicht mehr verwenden zu m{\"u}ssen. Dies kann jedoch nur erreicht werden, wenn es gelingt, die Speicherelemente und Datenverarbeitung in einem einzigen Element (Halbleiter) zu vereinen. Bisher wurde die Ladung eines Elektrons f{\"u}r die Verarbeitung von elektrischen Informationen bzw. Zust{\"a}nden benutzt. Was w{\"a}re jedoch, wenn man diese bisherige Basis v{\"o}llig {\"a}ndert? Der Spin der Elektronen ist ein viel effektiverer Informationstr{\"a}ger als die Ladung der Elektronen selbst, nicht zuletzt deshalb, weil die Ver{\"a}nderung des Spins eines Elektrons im Vergleich zu dessen Bewegung einen weitaus geringeren Energiebetrag ben{\"o}tigt [1]. Die Technik, die zus{\"a}tzlich zur Informationsverarbeitung durch makroskopische Elektronenstr{\"o}me den viel effektiveren Spin-Quantenzustand der Elektronen oder L{\"o}cher als Freiheitsgrad nutzt, ist die sogenannte Spintronik1. Die Spinfreiheitsgrade er{\"o}ffnen, wegen der l{\"a}ngeren Phasenkoh{\"a}renzl{\"a}nge, im Vergleich zu den orbitalen Freiheitsgraden, v{\"o}llig neue Wege f{\"u}r zuk{\"u}nftige Entwicklungen wie z.B. den Quantencomputer. Damit w{\"a}re die Entwicklung niederenergetischer Bauelemente m{\"o}glich, die fast keine W{\"a}rmeentwicklung aufweisen. Wegen dieser vielen Vorteile hat sich die Spintronik in Rekordzeit von einer interessanten wissenschaftlichen Beobachtung in Rekordzeit zu einer marktbewegenden Anwendung weiterentwickelt (Nobelpreis 2007). Seinen Anfang nahm diese Entwicklung 1988 mit der Entdeckung des GMR-Effekts. Nach nur 9 Jahren wurden 1997 erste Festplatten-Lesek{\"o}pfe eingesetzt, die sich diesen Effekt zu Nutze machten. Lesek{\"o}pfe, die den Riesenmagnetwiderstand nutzen, waren nunmehr um ein Vielfaches empfindlicher als es die konventionelle Technik zugelassen h{\"a}tte. Die Speicherdichte und damit die Kapazit{\"a}ten der Festplatten konnte somit erheblich gesteigert und Festplatten mit zuvor nie gekannter Speicherkapazit{\"a}t preiswert produziert werden. Seit dieser Zeit r{\"u}ckt der Elektronenspin immer weiter in den Brennpunkt von Forschung und Entwicklung. Da sich der elektrische Widerstand von Halbleitern in einem weiten Bereich manipulieren l{\"a}sst (was f{\"u}r ferromagnetische Metalle nicht der Fall ist), werden logische Bauelemente aus halbleitenden Materialien hergestellt. Im Gegensatz dazu sind ferromagnetische Metalle sehr gute Kandidaten f{\"u}r die Speicherung von Informationen. Dies liegt vor allem daran, dass zuf{\"a}llige Magnetfelder viel schw{\"a}cher sind, als zuf{\"a}llige elektrische Felder, was ferromagnetische Systeme wesentlich unanf{\"a}lliger macht. Daher sind die magnetischen Speicher nicht fl{\"u}chtig und zudem m{\"u}ssen deren Informationsgehalte nicht wie bei DRAM immer wieder aufgefrischt werden. Um die jeweiligen Vorteile der Materialklassen - die magnetisch energiesparende sowie dauerhafte Speicherf{\"a}higkeit der Metalle und die logischen Operationen der Halbleiter - miteinander kombinieren zu k{\"o}nnen und damit neuartige Bauelemente wie z.B. MRAMs (logische Operationen und dauerhafte Speicherung) zu bauen, sind ferromagnetischen Halbleiter unverzichtbar. Auf dieser Basis k{\"o}nnten Speicherelemente und Datenverarbeitung in einem einzigen Element (Halbleiter) dargestellt werden. Zugleich braucht man aber auch neue Wege, um diese Speicher zu magnetisieren und sp{\"a}ter auslesen zu k{\"o}nnen. Ein weiterer Vorteil liegt zudem darin, dass hierzu kein Einsatz beweglicher Teile notwendig ist. Die Magnetisierungskontrolle muss aber temperaturunabh{\"a}ngig sein! Der am besten erforschte ferromagnetische Halbleiter ist (Ga,Mn)As, der deswegen die Modellrolle einnimmt und als Prototyp f{\"u}r alle ferromagnetischen Halbleiter dient. Die Kopplung seiner magnetischen und halbleitenden Eigenschaften durch Spin-Bahn-Wechselwirkung ist die Ursache vieler neuer Transportph{\"a}nomene in diesem Materialsystem. Diese Ph{\"a}nomene sind vielfach die Grundlage f{\"u}r neuartige Anwendungen, Bauteildesigns und Wirkprinzipien. Das Ziel dieser Arbeit ist es, die interessanten Anisotropien in (Ga,Mn)As, die von der sehr starken Spin-Bahn-Kopplung im Valenzband herr{\"u}hren zu nutzen, sowie neue spinbezogene Effekte in verschiedenen magnetischen Bauelementen zu realisieren. Die vorliegende Arbeit gliedert sich wie folgt: In Kapitel 1 wird auf die grundlegenden Eigenschaften des (Ga,Mn)As und einige neuartige Spineffekten, die dieses Material mit sich bringt, eingegangen. Das zur Erzeugung dieser Effekte notwendige fertigungstechnische Wissen, f{\"u}r die lithografische Erzeugung der spintronisch bzw. caloritronisch aktiven Nanostrukturen, wird im Kapitel 2 beschrieben. Um mit dieser Welt der Spineffekte „kommunizieren" und die Effekte kontrollieren zu k{\"o}nnen, sind entsprechend angepasste und funktionsf{\"a}hige Kontaktierungen notwendig. Mit der detaillierten Herstellung und Analyse dieser Kontakte besch{\"a}ftigt sich das Kapitel 3. Es wurden zwei Arten von Kontakten hergestellt und bei den Proben eingesetzt: in situ (innerhalb der MBE-Wachstumskammer) und ex situ. Zusammenfassend l{\"a}sst sich sagen, dass bei der ex situ-Probenpr{\"a}paration, die Reproduzierbarkeit der Kontakte, besonders bei logisch magnetischen Elementen, nicht gew{\"a}hrleistet werden konnte. Bei funktionierender Kontaktierung war das magnetische Verhalten dann jedoch stets gleich. Bei den in situ-Kontakten war zwar einerseits das elektrische Verhalten reproduzierbar und sehr gut, aber das magnetische Verhalten war nicht zufriedenstellend, da die Relaxation nicht vollst{\"a}ndig stattfand. Im Rahmen dieser Arbeit konnten die ex situ-Kontakte optimiert werden. Dabei wurde auf die Problematiken bereits existierender Proben eingegangen und es wurden verschiedene L{\"o}sungsan s{\"a}tze daf{\"u}r gefunden. So konnte z.B. gezeigt werden, dass die Haftungsprobleme haupts{\"a}chlich auf dem unsaubere Oberfl{\"a}chen zur{\"u}ckzuf{\"u}hren sind. Jede Schicht, die zwischen aufgedampfter Metallschicht und dem dotierten Halbleiter bestehen bleibt, unabh{\"a}ngig davon, ob es sich dabei um eine oxidierte Schicht, Lackreste oder eine, zum Teil verarmte Schicht handelt, beeintr{\"a}chtigt die Funktionalit{\"a}t der Kontakte. Je kleiner die Dimension der Kontakte, desto st{\"a}rker wirkt sich die unsaubere Oberfl{\"a}che aus. So konnte gezeigt werden, dass ab einer Gr{\"o}ße von ca. 500nm_500nm die Zuverl{\"a}ssigkeit der Kontakte elementar von der Reinheit der Oberfl{\"a}chen und deren Homogenit{\"a}t beeinflusst wird. Zur Abwendung dieser Komplikationen werden verschiedene L{\"o}sungsans{\"a}tze vorgeschlagen. Wird die Oberfl{\"a}che mit hochenergetischen Ionen versetzt, verarmt deren Dotierung, was zu einer massiven {\"A}nderung der Leitf{\"a}higkeit f{\"u}hrt. Daher wurden entweder v{\"o}llig andere Prozessparameter zur Reinigung eingesetzt, die den dotierten HL nicht verarmen oder einer der nasschemischen Schritte wurde so angepasst, dass die extrem verarmte Schicht der HL-Oberfl{\"a}che entfernt wurde. Die einfachsten spintronischen Bauelemente (Streifen) und magnetischen Logikelemente sowie deren Ergebnisse werden im Kapitel 4 diskutiert. Hier wurde eindeutig gezeigt, dass die Streifen bei niedrigen Stromdichten nicht v{\"o}llig uniaxial sind, w{\"a}hrend bei erh{\"o}hten Stromdichten die Uniaxialit{\"a}t immer dominanter wird. Dies war jedoch zu erwarten, da bei erh{\"o}hten Stromdichten die Temperatur auch ansteigt und da, bei erh{\"o}hter Temperatur, die biaxiale Anisotropie mit M4, die uniaxiale aber jedoch nur mit M2 abf{\"a}llt - die dominante Anisotropie wechselt folglich von biaxial zu uniaxial [2]. Im Rahmen dieser Arbeit wurden die Grundlagen gelegt, um Speicherelemente und Datenverarbeitung in einem einzigen Halbleiter (Ga,Mn)As herzustellen. Auf Basis dieser Arbeit und den dabei gewonnenen litographischen Erkentnissen wurden, in nachfolgenden Arbeiten, solche Bauelemente realisiert [3]. Spin-Kaloritronik: Wie schon Eingangs erw{\"a}hnt, wird im Allgemeinen davon ausgegangen, dass die Miniaturisierung der zuk{\"u}nftigen Elektronik weitergef{\"u}hrt werden kann. Bei stetiger Verkleinerung der Strukturen kommt es in heutigen Anwendungen zu immer gr{\"o}ßeren Problemen bei der W{\"a}rmeabfuhr. Die Folgen der Temperaturdifferenzen innerhalb der Strukturen f{\"u}hren dabei zu sog. Hotspots oder sogar Materialsch{\"a}den. Temperaturunterschiede m{\"u}ssen aber nicht nur negative Auswirkungen haben. So wurde an einem ferromagnetischen System aus Nickel, Eisen und Platin der sogenannte Spin-Seebeck-Effekt gemessen, bei dem die Elektronen in den Regionen verschiedener Temperatur unterschiedliche Spinpolarisationen zeigen [4]. Eine Batterie, die diesen spinpolarisierten Strom nutzt, k{\"o}nnte einen entscheidenden Fortschritt in der Spintronik bedeuten. Dieser Bereich der Forschung an thermoelektrischen Effekten, bei denen ferromagnetische Materialien involviert sind, wird auch „spin-caloritronics" genannt [5]. Die Kapitel 5 und 6 besch{\"a}ftigen sich mit einer neuartigen Klasse spintronischer Bauteile. wh{\"a}rend das Kapitel 5 sich mit einer neuartigen Klasse spintronischer Bauteile, f{\"u}r die von uns als Bezeichnung TAMT („tunnel anisotropic magneto thermopower") eingef{\"u}hrt wurde, besch{\"a}ftigt, wird in Kapitel 6 an einem ver{\"a}nderten Probenlayout der Nernst-Effekt nachgewiesen. Die Geometrie wurde in beiden f{\"a}llen so gew{\"a}hlt und hergestellt, dass durch die Anisotropien des (Ga,Mn)As die beiden thermoelektrische Effekte (Seebeck- und Nernst-Effekt) auf einen n+-p+-{\"U}bergang {\"u}bertragen werden konnten. Durch einen Strom, in einem mit Silizium hoch dotierten GaAs-Heizkanal, kann jeweils ein vertikaler Temperaturgradient erzeugt werden. Die hierbei entstehenden Thermospannungen wurden durch eine vollst{\"a}ndige elektrische Charaktri sierungsmessung mit Hilfe pr{\"a}ziser Lock-in-Verst{\"a}rker-Technik detektiert. Das Kapitel 5 besch{\"a}ftigt sich mit allen Bereichen, von der Idee bis hin zu Messungen und Analysen des Seebeck-Effektes an einem n-p-{\"U}bergang (TAMT). Außerdem ist ein sehr einfaches numerisches Modell dargestellt, dass den gefundenen Effekt theoretisch beschreibt. Durch die bekannten thermoelektrischen Effekte ergibt sich ein Temperaturgradient der immer zu einer Thermospannung und somit zu einem Thermostrom entlang des Gradienten f{\"u}hrt. F{\"u}r zuk{\"u}nftige Entwicklungen ist es demnach wichtig, diese Effekte zu beachten und diese bei elektrischen Messungen an Nanostrukturen als m{\"o}gliche, zus{\"a}tzliche Ursache eines Messsignals in Betracht zu ziehen. In den vorliegenden Proben ist der Seebeck-Effekt stark anisotrop, mit einem gr{\"o}ßeren Thermospannungswert f{\"u}r Magnetisierungen entlang der magnetisch harten Achsen des (Ga,Mn)As. Es wurde ein einfaches Model entwickelt, welches das Tunneln von Elektronen zwischen zwei unterschiedlich warmen Bereichen erkl{\"a}rt. Die Abh{\"a}ngigkeit des Effekts von der Temperatur des Heizkanals wurde anhand dieses Models sowohl qualitativ als auch gr{\"o}ßenordnungsm{\"a}ßig korrekt beschrieben. Die Nernst-Proben wurden von der Theorie bis zur Herstellung so entwickelt, dass in derselben Anordnung eine im (Ga,Mn)As senkrecht zum Temperaturgradienten gerichtete Spannung zus{\"a}tzlich gemessen werden konnte. Diese wurde durch den Nernst-Effekt erkl{\"a}rt. Besonders interessant war, dass die Gr{\"o}ße der Nernst-Spannung hierbei mit der Magnetisierung im (Ga,Mn)As verkn{\"u}pft ist und somit ein aus der typischen Magnetisierungsumkehr hervorgehendes Verhalten zeigt. Gegen{\"u}ber den Magnetowiderstandseffekten entsteht beim Nernst-Effekt in sogenannten Fingerprints (vgl. Kapitel 1.3.3) ein dreistufiges Farbmuster anstelle eines zweistufigen hoch-tief-Systems. Die entstehende Temperatur im Heizkanal wird jeweils durch eine longitudinale Widerstandsmessung in einem senkrecht zum Kanal gerichteten {\"a}ußeren Magnetfeld bestimmt. Die Magnetfeldabh{\"a}ngigkeit des Widerstands kommt hierbei durch den Effekt der schwachen Lokalisierung in d{\"u}nnen Filmen zustande. Zusammenfassend stellen die Magneto-Thermoelektrizit{\"a}tseffekte eine wichtige weitere Transporteigenschaft in ferromagnetischen Halbleitern dar, die mit der Magnetisierung direkt zusammenh{\"a}ngen. In dieser Arbeit wurden Thermospannungen an (Ga,Mn)As-Schichten mit vergleichsweise hoher Mangankonzentration untersucht. Allerdings sind die Thermoelektrizit{\"a}tseigenschaften zusammen mit Magneto-Widerstandsmessungen in Zukunft in der Lage, zus{\"a}tzliche Informationen {\"u}ber die Bandstruktur sowie die Ladungstr{\"a}gereigenschaften in Materialsystemen mit niedrigerem Mangangehalt, insbesondere in der N{\"a}he des Metall-Isolator-{\"U}bergangs, zu liefern. Inhalt des Anhangs ist eine ausf{\"u}hrliche Anleitung zur Optimierung der Probenherstellung bzw. der verschiedenen Bauelemente.}, subject = {Spintronik}, language = {de} } @phdthesis{Stahl2010, author = {Stahl, Andreas}, title = {R{\"o}ntgenstrukturuntersuchungen an spintronischen Halbleiter- und Halbmetall-D{\"u}nnschichtsystemen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-49309}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {In dieser Arbeit wurden die strukturellen Eigenschaften von spintronischen Halbleiter- und Halbmetall-D{\"u}nnschichtsystemen untersucht. Mit R{\"o}ntgenreflektivit{\"a}tsmessungen konnten die Schichtdicken und Grenzfl{\"a}chenrauigkeiten der Mehrschichtsysteme sehr genau bestimmt werden. Hierf{\"u}r wurde die Software Fewlay verwendet, welche den Parratt-Formalismus zur Berechnung der Reflektivit{\"a}t nutzt. An reziproken Gitterkarten, die an m{\"o}glichst hoch indizierten Bragg-Reflexen gemessen wurden, konnte das Relaxationsverhalten der Schichtsysteme untersucht werden.}, subject = {Halbleiterschicht}, language = {de} } @phdthesis{Slobodskyy2006, author = {Slobodskyy, Taras}, title = {Semimagnetic heterostructures for spintronics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-21011}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {F{\"u}r zuk{\"u}nftige Technologien ist die Erforschung von der verwendeten Teilchen n{\"o}tig. Spintronik ist ein modernes Gebiet der Physik, welches neben der Ladung auch die Spineigenschaften als zus¨atzlichen Freiheitsgrad nutzbar macht. Der "conductivity mismatch" stellt ein fundamentales Problem f{\"u}r elektrische Spininjektion aus einem ferromagnetischem Metal in einen diffusiven Halbleiter dar. Daher m{\"u}ssen andere Methoden f{\"u}r die Injektion spin-polarisierter Ladungstr{\"a}ger benutzt werden. Mit einem Tunnelkontakt ist es m{\"o}glich, eine hoch spin-polarisierte, Raumtemperatur Tunnel-Injektion zu erzielen. Wir benutzten einen neuen Ansatz und verwendeten magnetische RTDs zur Spinmanipulation. In dieser Arbeit wurden die Eigenschaften von magnetischen, resonanten Tunneldioden (RTDs) aus rheinen II-VI-Halbleitern in ihrer Verwendung f{\"u}r die Spintronik beschrieben. Wachstumsbedingungen wurden optimiert, um das Peak-to-Valley-Verh{\"a}ltnis zu vergr{\"o}ßern. Das Design der RTDs wurde optimiert, um spinbezogene Transporteffekte beobachten zu k{\"o}nen. Mit einem externen Magnetfeld war Spinmanipulation m{\"o}glich. Selbstorganisierte CdSe Quanten-Strukturen wurden hergestelt und mit optischen Techniken untersucht. Sie w{\"u}rden in (Zn,Be)Se Tunnelbarrieren eingebettet, so dass ihre Eigenschaften durch resonantes Tunneln zug{\"a}nglich wurden.}, subject = {Heterostruktur-Bauelement}, language = {en} } @phdthesis{Samiepour2014, author = {Samiepour, Marjan}, title = {Fabrication and characterization of CPP-GMR and spin-transfer torque induced magnetic switching}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-102226}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Even though the unique magnetic behavior for ferromagnets has been known for thousands of years, explaining this interesting phenomenon only occurred in the 20th century. It was in 1920, with the discovery of electron spin, that a clear explanation of how ferromagnets achieve their unique magnetic properties came to light. The electron carries an intrinsic electric charge and intrinsic angular momentum. Use of this property in a device was achieved in 1998 when Fert and Gru¨nberg independently found that the resistance of FM/NM/FM trilayer depended on the angle between the magnetization of the two layers. This phenomena which is called giant magnetoresistance (GMR) brought spin transfer into mainstream. This new discovery created a brand new research fi called "spintronics" or "spin based electronics" which exploits the intrinsic spin of electron. As expected spintronics delivered a new generation of magnetic devices which are currently used in magnetic disk drives and magnetic random access memories (MRAM). The potential advantages of spintronics devices are non-volatility, higher speed, increased data density and low power consumption. GMR devices are already used in industry as magnetic memories and read heads. The quality of GMR devices can be increased by developing new magnetic materials and also by going down to nanoscale. The desired characteristic properties of these new materials are higher spin polarization, higher curie temperature and better spin filtering. Half-metals are a good candidate for these devices since they are expected to have high polarization. Some examples of half-metals are Half-Heusler alloy, full Heusler alloy and Perovskite or double Perovskite oxides. The devices discussed in this thesis have NiMnSb half-Heusler alloy and permalloy as the ferromagnetic layers separated by Cu as the nonmagnetic layer. This dissertation includes mainly two parts, fabrication and characterization of nan- opillars. The layer stack used for the fabrication is Ru/Py/Cu/NiMnSb which is grown on an InP substrate with an (In,Ga)As buff by molecule beam epitaxy (MBE). A new method of fabrication using metal mask which has a higher yield of working samples over the previous method (using the resist mask) used in our group is discussed in detail. Also, the advantages of this new method and draw backs of the old method are explained thoroughly (in chapter 3). The second part (chapters 4 and 5) is focused on electrical measurements and charac- terization of the nanopillar, specially with regard to GMR and spin-transfer torque (STT) measurements. In chapter 4, the results of current perpendicular the plane giant mag- netoresistance (CPP-GMR) measurements at various temperatures and in-plane magnetic fi are presented. The dependence of CPP-GMR on bias current and shape anisotropy of the device are investigated. Results of these measurements show that the device has strong shape anisotropy. The following chapter deals with spin-transfer torque induced magnetic switching measurements done on the device. Critical current densities are on the order of 106 A/cm2, which is one order of magnitude smaller than the current industry standards. Our results show that the two possible magnetic configurations of the nanopillar (parallel and anti-parallel) have a strong dependence on the applied in-plane magnetic fi Fi- nally, four magnetic fi regimes based on the stability of the magnetic configuration (P stable, AP stable, both P and AP stable, both P and AP unstable) are identified.}, subject = {Riesenmagnetowiderstand}, language = {en} } @phdthesis{Rueth2011, author = {R{\"u}th, Michael}, title = {A Comprehensive Study of Dilute Magnetic Semiconductor Resonant Tunneling Diodes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-71472}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {We investigate transport measurements on all II-VI semiconductor resonant tunneling diodes (RTDs). Being very versatile, the dilute magnetic semiconductor (DMS) system (Zn,Be,Mn,Cd)Se is a perfect testbed for various spintronic device designs, as it allows for separate control of electrical and magnetic properties. In contrast to the ferromagnetic semiconductor (Ga,Mn)As, doping ZnSe with Mn impurities does not alter the electrical properties of the semiconductor, as the magnetic dopant is isoelectric in the ZnSe host.}, subject = {Semimagnetischer Halbleiter}, language = {en} } @phdthesis{Rothe2015, author = {Rothe, Dietrich Gernot}, title = {Spin Transport in Topological Insulators and Geometrical Spin Control}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125628}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {In the field of spintronics, spin manipulation and spin transport are the main principles that need to be implemented. The main focus of this thesis is to analyse semiconductor systems where high fidelity in these principles can be achieved. To this end, we use numerical methods for precise results, supplemented by simpler analytical models for interpretation. The material system of 2D topological insulators, HgTe/CdTe quantum wells, is interesting not only because it provides a topologically distinct phase of matter, physically manifested in its protected transport properties, but also since within this system, ballistic transport of high quality can be realized, with Rashba spin-orbit coupling and electron densities that are tunable by electrical gating. Extending the Bernvevig-Hughes-Zhang model for 2D topological insulators, we derive an effective four-band model including Rashba spin-orbit terms due to an applied potential that breaks the spatial inversion symmetry of the quantum well. Spin transport in this system shows interesting physics because the effects of Rashba spin-orbit terms and the intrinsic Dirac-like spin-orbit terms compete. We show that the resulting spin Hall signal can be dominated by the effect of Rashba spin-orbit coupling. Based on spin splitting due to the latter, we propose a beam splitter setup for all-electrical generation and detection of spin currents. Its working principle is similar to optical birefringence. In this setup, we analyse spin current and spin polarization signals of different spin vector components and show that large in-plane spin polarization of the current can be obtained. Since spin is not a conserved quantity of the model, we first analyse the transport of helicity, a conserved quantity even in presence of Rashba spin-orbit terms. The polarization defined in terms of helicity is related to in-plane polarization of the physical spin. Further, we analyse thermoelectric transport in a setup showing the spin Hall effect. Due to spin-orbit coupling, an applied temperature gradient generates a transverse spin current, i.e. a spin Nernst effect, which is related to the spin Hall effect by a Mott-like relation. In the metallic energy regimes, the signals are qualitatively explained by simple analytic models. In the insulating regime, we observe a spin Nernst signal that originates from the finite-size induced overlap of edge states. In the part on methods, we discuss two complementary methods for construction of effective semiconductor models, the envelope function theory and the method of invariants. Further, we present elements of transport theory, with some emphasis on spin-dependent signals. We show the connections of the adiabatic theorem of quantum mechanics to the semiclassical theory of electronic transport and to the characterization of topological phases. Further, as application of the adiabatic theorem to a control problem, we show that universal control of a single spin in a heavy-hole quantum dot is experimentally realizable without breaking time reversal invariance, but using a quadrupole field which is adiabatically changed as control knob. For experimental realization, we propose a GaAs/GaAlAs quantum well system.}, subject = {Elektronischer Transport}, language = {en} } @phdthesis{Reinthaler2015, author = {Reinthaler, Rolf Walter}, title = {Charge and Spin Transport in Topological Insulator Heterojunctions}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-135611}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Over the last decade, the field of topological insulators has become one of the most vivid areas in solid state physics. This novel class of materials is characterized by an insulating bulk gap, which, in two-dimensional, time-reversal symmetric systems, is closed by helical edge states. The latter make topological insulators promising candidates for applications in high fidelity spintronics and topological quantum computing. This thesis contributes to bringing these fascinating concepts to life by analyzing transport through heterostructures formed by two-dimensional topological insulators in contact with metals or superconductors. To this end, analytical and numerical calculations are employed. Especially, a generalized wave matching approach is used to describe the edge and bulk states in finite size tunneling junctions on the same footing. The numerical study of non-superconducting systems focuses on two-terminal metal/topological insulator/metal junctions. Unexpectedly, the conductance signals originating from the bulk and the edge contributions are not additive. While for a long junction, the transport is determined purely by edge states, for a short junction, the conductance signal is built from both bulk and edge states in a ratio, which depends on the width of the sample. Further, short junctions show a non-monotonic conductance as a function of the sample length, which distinguishes the topologically non-trivial regime from the trivial one. Surprisingly, the non-monotonic conductance of the topological insulator can be traced to the formation of an effectively propagating solution, which is robust against scalar disorder. The analysis of the competition of edge and bulk contributions in nanostructures is extended to transport through topological insulator/superconductor/topological insulator tunneling junctions. If the dimensions of the superconductor are small enough, its evanescent bulk modes can couple edge states at opposite sample borders, generating significant and tunable crossed Andreev reflection. In experiments, the latter process is normally disguised by simultaneous electron transmission. However, the helical edge states enforce a spatial separation of both competing processes for each Kramers' partner, allowing to propose an all-electrical measurement of crossed Andreev reflection. Further, an analytical study of the hybrid system of helical edge states and conventional superconductors in finite magnetic fields leads to the novel superconducting quantum spin Hall effect. It is characterized by edge states. Both the helicity and the protection against scalar disorder of these edge states are unaffected by an in-plane magnetic field. At the same time its superconducting gap and its magnetotransport signals can be tuned in weak magnetic fields, because the combination of helical edge states and superconductivity results in a giant g-factor. This is manifested in a non-monotonic excess current and peak splitting of the dI/dV characteristics as a function of the magnetic field. In consequence, the superconducting quantum spin Hall effect is an effective generator and detector for spin currents. The research presented here deepens the understanding of the competition of bulk and edge transport in heterostructures based on topological insulators. Moreover it proposes feasible experiments to all-electrically measure crossed Andreev reflection and to test the spin polarization of helical edge states.}, subject = {Topologischer Isolator}, language = {en} } @phdthesis{Quast2017, author = {Quast, Jan-Henrik}, title = {Influence of Hot Carriers on Spin Diffusion in Gallium Arsenide}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-147611}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {Since the late 20th century, spintroncis has become a very active field of research [ŽFS04]. The prospect of spin based information technology, featuring strongly decreased energy consumption and possibly quantum-computation capabilities, has fueled this interest. Standard materials, like bulk gallium arsenide (GaAs), have experienced new attention in this context by exhibiting extraordinarily long lifetimes for nonequilibrium spin information, which is an important requirement for efficient spin based information storage and transfer. Another important factor is the lengthscale over which spin information can be transported in a given material and the role of external influences. Both aspects have been studied experimentally with innovative optical methods since the late 1990s by the groups of D. D. AWSHALOM and S. A. CROOKER et al. [KA99, CS05, CFL+05]. Although the pioneering experimental approaches presented by these authors led to a variety of insights into spin propagation, some questions were raised as well. Most prominently, the classical Einstein relation, which connects the mobility and diffusivity of a given particle species, seemed to be violated for electron spins in a bulk semiconductor. In essence, nonequilibrium spins appeared to move (diffuse) faster than the electrons that actually carry the spin. However, this contradiction was masked by the fact, that the material of interest was n-type GaAs with a doping concentration directly at the transition between metallic and insulating behavior (MIT). In this regime, the electron mobility is difficult to determine experimentally. Consequently, it was not a priori obvious that the spin diffusion rates determined by the newly introduced optical methods were in contradiction with established electrical transport data. However, in an attempt to extend the available data of optical spin microscopy, another issue surfaced, concerning the mathematical drift-diffusion model that has been commonly used to evaluate lateral spin density measurements. Upon close investigation, this model appears to have a limited range of applicability, due to systematic discrepancies with the experimental data (chapter 4). These deviations are noticeable in original publications as well, and it is shown in the present work that they originate from the local heating of electrons in the process of optical spin pumping. Based on insights gained during the second half of the 20th century, it is recapitulated why conduction electrons are easily overheated at cryogenic temperatures. The main reason is the poor thermal coupling between electrons and the crystal lattice (chapter 3). Experiments in the present work showed that a significant thermal gradient exists in the conduction band under local optical excitation of electron-hole pairs. This information was used to develop a better mathematical model of spin diffusion, which allowed to derive the diffusivity of the undisturbed system, due to an effective consideration of electron overheating. In this way, spin diffusivities of n-GaAs were obtained as a function of temperature and doping density in the most interesting regime of the metal-insulator-transition. The experiments presented in this work were performed on a series of n-type bulk GaAs samples, which comprised the transition between metallic conductivity and electrical insulation at low temperatures. Local electron temperature gradients were measured by a hyperspectral photoluminescence imaging technique with subsequent evaluation of the electron-acceptor (e,A\$^0\$) line shape. The local density of nonequilibrium conduction electron spins was deduced from scanning magneto-optic Kerr effect microscopy. Numerical evaluations were performed using the finite elements method in combination with a least-squares fitting procedure. Chapter 1 provides an introduction to historical and recent research in the field of spintronics, as far as it is relevant for the understanding of the present work. Chapter 2 summarizes related physical concepts and experimental methods. Here, the main topics are semiconductor optics, relaxation of hot conduction electrons, and the dynamics of nonequilibrium electron spins in semiconductors. Chapter 3 discusses optical heating effects due to local laser excitation of electron-hole pairs. Experimental evaluations of the acceptor-bound-exciton triplet lines led to the conclusion that the crystal lattice is usually not overheated even at high excitation densities. Here, the heat is efficiently dissipated to the bath, due to the good thermal conductivity of the lattice. Furthermore, the heating of the lattice is inherently limited by the weak heat transfer from the electron system, which on the other hand is also the reason why conduction electrons are easily overheated at temperatures below ≈ 30 K. Spatio-spectral imaging of the electron-acceptor-luminescence line shape allowed to trace the thermal gradient within the conduction band under focused laser excitation. A heat-diffusion model was formulated, which reproduces the experimental electron-temperature trend nicely for low-doped GaAs samples of n- and p-type. For high-doped n-type GaAs samples, it could be shown that the lateral electron-temperature profile is well approximated by a Gaussian. This facilitated easy integration of hot electron influence into the mathematical model of spin diffusion. Chapter 4 deals with magneto-optical imaging of optically induced nonequilibrium conduction-electron spins in n-GaAs close to the MIT. First, the spectral dependence of the magneto-optic Kerr effect was examined in the vicinity of the fundamental band gap. Despite the marked differences among the investigated samples, the spectral shape of the Kerr rotation could be described in terms of a simple Lorentz-oscillator model in all cases. Based on this model, the linearity of the Kerr effect with respect to a nonequilibrium spin polarization is demonstrated, which is decisively important for further quantitative evaluations. Furthermore, chapter 4 presents an experimental survey of spin relaxation in n-GaAs at the MIT. Here, the dependence of the spin relaxation time on bath temperature and doping density was deduced from Hanle-MOKE measurements. While all observed trends agree with established literature, the presented results extend the current portfolio by adding a coherent set of data. Finally, diffusion of optically generated nonequilibrium conduction-electron spins was investigated by scanning MOKE microscopy. First, it is demonstrated that the standard diffusion model is inapplicable for data evaluation in certain situations. A systematic survey of the residual deviations between this model and the experimental data revealed that this situation unfortunately persisted in published works. Moreover, the temperature trend of the residual deviations suggests a close connection to the local overheating of conduction electrons. Consequently, a modified diffusion model was developed and evaluated, in order to compensate for the optical heating effect. From this model, much more reliable results were obtained, as compared to the standard diffusion model. Therefore, it was shown conclusively that the commonly reported anomalously large spin diffusivities were at least in parts caused by overheated conduction electrons. In addition to these new insights some experimental and technological enhancements were realized in the course of this work. First, the optical resolution of scanning MOKE microscopy was improved by implementing a novel scanning mechanism, which allows the application of a larger aperture objective than in the usual scheme. Secondly, imaging photoluminescence spectroscopy was employed for spatially resolved electron-temperature measurements. Here, two different implementations were developed: One for lattice-temperature measurements by acceptor-bound exciton luminescence and a second for conduction-electron temperature measurements via the analysis of the electron-acceptor luminescence line shape. It is shown in the present work that the originally stated anomalously high spin diffusivities were caused to a large extent by unwanted optical heating of the electron system. Although an efficient method was found to compensate for the influence of electron heating, it became also evident that the classical Einstein relation was nonetheless violated under the given experimental conditions. In this case however, it could be shown that this discrepancy did not originate from an experimental artifact, but was instead a manifestation of the fermionic nature of conduction electrons.}, subject = {Galliumarsenid}, language = {en} } @phdthesis{Pappert2007, author = {Pappert, Katrin}, title = {Anisotropies in (Ga,Mn)As - Measurement, Control and Application in Novel Devices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-23370}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Ferromagnetic semiconductors (FS) promise the integration of magnetic memory functionalities and semiconductor information processing into the same material system. The prototypical FS (Ga,Mn)As has become the focus of semiconductor spintronics research over the past years. The spin-orbit mediated coupling of magnetic and semiconductor properties in this material gives rise to many novel transport-related phenomena which can be harnessed for device applications. In this thesis we address challenges faced in the development of an all-semiconductor memory architecture. A starting point for information storage in FS is the knowledge of their detailed magnetic anisotropy. The first part of this thesis concentrates on the investigation of the magnetization behaviour in compressively strained (Ga,Mn)As by electrical means. The angle between current and magnetization is monitored in magnetoresistance(MR) measurements along many in-plane directions using the Anisotropic MR(AMR) or Planar Hall effect(PHE). It is shown, that a full angular set of such measurements displayed in a color coded resistance polar plot can be used to identify and quantitatively determine the symmetry components of the magnetic anisotropy of (Ga,Mn)As at 4 K. We compile such "anisotropy fingerprints" for many (Ga,Mn)As layers from Wuerzburg and other laboratories and find the presence of three symmetry terms in all layers. The biaxial anisotropy term with easy axes along the [100] and [010] crystal direction dominates the magnetic behaviour. An additional uniaxial term with an anisotropy constant of ~10\% of the biaxial one has its easy axis along either of the two <110> directions. A second contribution of uniaxial symmetry with easy axis along one of the biaxial easy axes has a strength of only ~1\% of the biaxial anisotropy and is therefore barely visible in standard SQUID measurements. An all-electrical writing scheme would be desirable for commercialization. We report on a current assisted magnetization manipulation experiment in a lateral (Ga,Mn)As nanodevice at 4 K (far below Tc). Reading out the large resistance signal from DW that are confined in nanoconstrictions, we demonstrate the current assisted magnetization switching of a small central island through a hole mediated spin transfer from the adjacent leads. One possible non-perturbative read-out scheme for FS memory devices could be the recently discovered Tunneling Anisotropic MagnetoResistance (TAMR) effect. Here we clarify the origin of the large amplification of the TAMR amplitude in a device with an epitaxial GaAs tunnel barrier at low temperatures. We prove with the help of density of states spectroscopy that a thin (Ga,Mn)As injector layer undergoes a metal insulator transition upon a change of the magnetization direction in the layer plane. The two states can be distinguished by their typical power law behaviour in the measured conductance vs voltage tunneling spectra. While all hereto demonstrated (Ga,Mn)As devices inherited their anisotropic magnetic properties from their parent FS layer, more sophisticated FS architectures will require locally defined FS elements of different magnetic anisotropy on the same wafer. We show that shape anisotropy is not applicable in FS because of their low volume magnetization. We present a method to lithographically engineer the magnetic anisotropy of (Ga,Mn)As by submicron patterning. Anisotropic strain relaxation in submicron bar structures (nanobars) and the related deformation of the crystal lattice introduce a new uniaxial anisotropy term in the energy equation. We demonstrate by both SQUID and transport investigations that this lithographically induced uniaxial anisotropy overwrites the intrinsic biaxial anisotropy at all temperatures up to Tc. The final section of the thesis combines all the above into a novel device scheme. We use anisotropy engineering to fabricate two orthogonal, magnetically uniaxial, nanobars which are electrically connected through a constriction. We find that the constriction resistance depends on the relative orientation of the nanobar magnetizations, which can be written by an in-plane magnetic field. This effect can be explained with the AMR effect in connection with the field line patterns in the respective states. The device offers a novel non-volatile information storage scheme and a corresponding non-perturbative read-out method. The read out signal is shown to increase drastically in samples with partly depleted constriction region. This could be shown to originate in a magnetization direction driven metal insulator transition of the material in the constriction region.}, subject = {Anisotropie}, language = {en} } @phdthesis{Pakkayil2017, author = {Pakkayil, Shijin Babu}, title = {Towards ferromagnet/superconductor junctions on graphene}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-153863}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {This thesis reports a successful fabrication and characterisation of ferromagnetic/superconductor junction (F/S) on graphene. The thesis preposes a fabrication method to produce F/S junctions on graphene which make use of ALD grown Al2O3 as the tunnel barrier for the ferromagnetic contacts. Measurements done on F/G/S/G/F suggests that by injecting spin polarised current into the superconductor, a spin imbalance is created in the quasiparticle density of states of the superconductor which then diffuses through the graphene channel. The observed characteristic curves are similar to the ones which are already reported on metallic ferromagnet/superconductor junctions where the spin imbalance is created using Zeeman splitting. Further measurements also show that the curves loose their characteristic shapes when the temperature is increased above the critical temperature (Tc) or when the external magnetic field is higher then the critical field (Hc) of the superconducting contact. But to prove conclusively and doubtlessly the existence of spin imbalance in ferromagnet/superconductor junctions on graphene, more devices have to be made and characterised preferably in a dilution refrigerator.}, subject = {Graphen}, language = {en} }