@phdthesis{Werner2014, author = {Werner, Katharina Julia}, title = {Adipose Tissue Engineering - In vitro Development of a subcutaneous fat layer and a vascularized adipose tissue construct utilizing extracellular matrix structures}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-104676}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Each year millions of plastic and reconstructive procedures are performed to regenerate soft tissue defects after, for example, traumata, deep burns or tumor resections. Tissue engineered adipose tissue grafts are a promising alternative to autologous fat transfer or synthetic implants to meet this demand for adipose tissue. Strategies of tissue engineering, especially the use of cell carriers, provide an environment for better cell survival, an easier positioning and supplemented with the appropriate conditions a faster vascularization in vivo. To successfully engineer an adipose tissue substitute for clinical use, it is crucial to know the actual intended application. In some areas, like the upper and lower extremities, only a thin subcutaneous fat layer is needed and in others, large volumes of vascularized fat grafts are more desirable. The use and interplay of stem cells and selected scaffolds were investigated and provide now a basis for the generation of fitted and suitable substitutes in two different application areas. Complex injuries of the upper and lower extremities, in many cases, lead to excessive scarring. Due to severe damage to the subcutaneous fat layer, a common sequela is adhesion formation to mobile structures like tendons, nerves, and blood vessels resulting in restricted motion and disabling pain [Moor 1996, McHugh 1997]. In order to generate a subcutaneous fat layer to cushion scarred tissue after substantial burns or injuries, different collagen matrices were tested for clinical handling and the ability to support adipogenesis. When testing five different collagen matrices, PermacolTM and StratticeTM showed promising characteristics; additionally both possess the clinical approval. Under culture conditions, only PermacolTM, a cross-linked collagen matrix, exhibited an excellent long-term stability. Ranking nearly on the same level was StratticeTM, a non-cross-linked dermal scaffold; it only exhibited a slight shrinkage. All other scaffolds tested were severely compromised in stability under culture conditions. Engineering a subcutaneous fat layer, a construct would be desirable with a thin layer of emerging fat for cushioning on one side, and a non-seeded other side for cell migration and host integration. With PermacolTM and StratticeTM, it was possible to produce constructs with ASC (adipose derived stem cells) seeded on one side, which could be adipogenically differentiated. Additionally, the thickness of the cell layer could be varied. Thereby, it becomes possible to adjust the thickness of the construct to the surrounding tissue. In order to reduce the pre-implantation time ex vivo and the costs, the culture time was varied by testing different induction protocols. An adipogenic induction period of only four days was demonstrated to be sufficient to obtain a substantial adipogenic differentiation of the applied ASC. Thus, seeded with ASC, PermacolTM and StratticeTM are suitable scaffolds to engineer subcutaneous fat layers for reconstruction of the upper and lower extremities, as they support adipogenesis and are appropriately thin, and therefore would not compromise the cosmesis. For the engineering of large-volume adipose tissue, adequate vascularization still represents a major challenge. With the objective to engineer vascularized fat pads, it is important to consider the slow kinetics of revascularization in vivo. Therefore, a decellularized porcine jejunum with pre-existing vascular structures and pedicles to connect to the host vasculature or the circulation of a bioreactor system was used. In a first step, the ability of a small decellularized jejunal section was tested for cell adhesion and for supporting adipogenic differentiation of hASC mono-cultures. Cell adhesion and adipogenic maturation of ASC seeded on the jejunal material was verified through histological and molecular analysis. After the successful mono-culture, the goal was to establish a MVEC (microvascular endothelial cells) and ASC co-culture; suitable culture conditions had to be found, which support the viability of both cell types and do not interfere with the adipogenic differentiation. After the elimination of EGF (epidermal growth factor) from the co-culture medium, substantial adipogenic maturation was observed. In the next step, a large jejunal segment (length 8 cm), with its pre-existing vascular structures and arterial/venous pedicles, was connected to the supply system of a custom-made bioreactor. After successful reseeding the vascular structure with endothelial cells, the lumen was seeded with ASC which were then adipogenically induced. Histological and molecular examinations confirmed adipogenic maturation and the existence of seeded vessels within the engineered construct. Noteworthily, a co-localization of adipogenically differentiating ASC and endothelial cells in vascular networks could be observed. So, for the first time a vascularized fat construct was developed in vitro, based on the use of a decellularized porcine jejunum. As this engineered construct can be connected to a supply system or even to a patient vasculature, it is versatile in use, for example, as transplant in plastic and reconstruction surgery, as model in basic research or as an in vitro drug testing system. To summarize, in this work a promising substitute for subcutaneous fat layer reconstruction, in the upper and lower extremities, was developed, and the first, as far as reported, in vitro generated adipose tissue construct with integrated vascular networks was successfully engineered.}, subject = {Tissue Engineering}, language = {en} } @article{VottelerCarvajalBerrioPudlasetal.2012, author = {Votteler, Miriam and Carvajal Berrio, Daniel A. and Pudlas, Marieke and Walles, Heike and Schenke-Layland, Katja}, title = {Non-contact, Label-free Monitoring of Cells and Extracellular Matrix using Raman Spectroscopy}, series = {Journal of Visual Expression}, volume = {63}, journal = {Journal of Visual Expression}, number = {e3977}, doi = {10.3791/3977}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-124569}, year = {2012}, abstract = {Non-destructive, non-contact and label-free technologies to monitor cell and tissue cultures are needed in the field of biomedical research.1-5 However, currently available routine methods require processing steps and alter sample integrity. Raman spectroscopy is a fast method that enables the measurement of biological samples without the need for further processing steps. This laser-based technology detects the inelastic scattering of monochromatic light.6 As every chemical vibration is assigned to a specific Raman band (wavenumber in cm-1), each biological sample features a typical spectral pattern due to their inherent biochemical composition.7-9 Within Raman spectra, the peak intensities correlate with the amount of the present molecular bonds.1 Similarities and differences of the spectral data sets can be detected by employing a multivariate analysis (e.g. principal component analysis (PCA)).10 Here, we perform Raman spectroscopy of living cells and native tissues. Cells are either seeded on glass bottom dishes or kept in suspension under normal cell culture conditions (37 °C, 5\% CO2) before measurement. Native tissues are dissected and stored in phosphate buffered saline (PBS) at 4 °C prior measurements. Depending on our experimental set up, we then either focused on the cell nucleus or extracellular matrix (ECM) proteins such as elastin and collagen. For all studies, a minimum of 30 cells or 30 random points of interest within the ECM are measured. Data processing steps included background subtraction and normalization.}, language = {en} } @phdthesis{Starke2007, author = {Starke, Josefine}, title = {Dynamik, Biomechanik und Plastizit{\"a}t des Aktinzytoskeletts in migrierenden B16/F1 GFP-Aktin Melanomzellen in 2D und 3D extrazellul{\"a}rer Matrix}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-25689}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Die Anpassung des Aktinzytoskeletts an extrazellul{\"a}re Gewebsstrukturen ist Voraussetzung f{\"u}r die Interaktion mit der extrazellul{\"a}ren Matrix und f{\"u}r die Zellbewegung, einschließlich der Invasion und Metastasierung von Tumorzellen. Wir untersuchten bei invasiven B16/F1 GFP-Aktin Mausmelanomzellen, ob und wie sich Zellform, Art und Effizienz der Bewegung an physikalisch unterschiedlich beschaffene kollagen{\"o}se Umgebungen anpassen: 1) mit Kollagen-Monomeren beschichtete 2D Objekttr{\"a}ger, 2) 2D Oberfl{\"a}che einer fibrill{\"a}ren Kollagenmatrix und 3) Zellen, die in einer 3D Kollagenmatrix eingebettet waren. Zur Darstellung des Aktinzytoskeletts wurden Zellen eingesetzt, die GFP-Aktin Fusionsprotein exprimierten, und mittels Zeitraffer-Videomikroskopie und Konfokalmikroskopie untersucht. Im direkten Vergleich waren Struktur und Dynamik des Aktinzytoskelett wie auch Zellform und Art der Migration unterschiedlich in den verschiedenen Umgebungen. Auf 2D planer Oberfl{\"a}che erfolgte eine rasche Adh{\"a}sion und Abflachung der Zellen (Spreading) mit nachfolgender Migration mit Bildung fokaler Adh{\"a}sionszonen, in die kabelartige Aktinstrukturen (Stress fibers) einstrahlten. Dagegen entwickelte sich in 3D Kollagenmatrices eine spindelf{\"o}rmige, fibroblasten{\"a}hnliche Zellform (mesenchymal) mit zylindrischen fingerf{\"o}rmigen vorderen Pseudopodien, die Zug der Zelle nach vorne bewirken und hochdynamisches polymeres Aktin, nicht jedoch Stress Fibers enthielten. Eine {\"a}hnliche Zellform und Struktur des Zytoskeletts entwickelte sich in Zellen auf 2D fibrill{\"a}rem Kollagen. Die Kontaktfindung und Migrationseffizienz auf oder in fibrill{\"a}ren Matrices war im Vergleich zu 2D kollagenbeschichteter Oberfl{\"a}che erschwert, die Migrationseffizienz verringert. In Kontrollversuchen wurden Migration und polarisierte Bildung von Aktindynamik durch Inhibitoren des Aktinzytoskeletts (Cytochalasin D, Latrunculin B, Jasplakinolide) stark gehemmt. Diese Befunde zeigen , dass die Struktur und Dynamik des Aktinzytoskeletts sowie die Art der Migration in Tumorzellen st{\"a}rker als bisher angenommen durch die umgebende Kollagenstruktur bestimmt wird. W{\"a}hrend 3D Kollagenmatrices in vivo {\"a}hnliche bipolare Zytoskelettstruktur f{\"o}rdern, m{\"u}ssen Abflachung der Zellen mit Bildung von Stress Fibers als spezifische Charakteristika von 2D Modellen angesehen werden.}, subject = {Aktin}, language = {de} } @phdthesis{Roehrig2015, author = {R{\"o}hrig, Florian}, title = {Verbesserung der Medikamenteneinbringung in solide Tumoren durch Modifikation der extrazellul{\"a}ren Matrix}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-117381}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Bei der Behandlung solider Tumoren spielen systemisch verabreichte Chemotherapeutika eine wich- tige Rolle. Allerdings akkumulieren diese Therapeutika besser in normalem Gewebe als in Tumoren. Als Ursache f{\"u}r diesen unzureichenden Transport von Medikamenten in den Tumor wurde bisher vor allem die dysfunktionale Tumorvaskulatur diskutiert. Diese befindet sich in einem chaotischen und unreifen Zustand ohne ausreichende Bedeckung der Gef{\"a}ße mit stabilisierenden Perizyten. Aus dem Zustand der Vaskulatur resultierend erreichen Medikamente den Tumor nur in geringem Ausmaß und werden dort heterogen verteilt. Als Grund f{\"u}r den Zustand der Vaskulatur wur- de ein großer {\"U}berschuss an pro-angiogenetischen Faktoren im Tumor ausgemacht. Durch eine anti-angiogenetische Behandlung konnte in pr{\"a}klinischen Modellen f{\"u}r einen gewissen Zeitraum die Tumorvaskulatur „normalisiert" werden. Dies zeichnete sich vor allem durch Ver{\"a}nderung von zwei wichtigen Parametern f{\"u}r die Medikamenteneinbringung aus: zum Einen kommt es zu einer Reduktion der Gef{\"a}ßdichte. Zum Anderen zu einer Reifung der Blutgef{\"a}ße. In einem Teil von Pati- enten scheint dabei der Effekt der Gef{\"a}ßverbesserung zu {\"u}berwiegen und es kann eine verbesserte Perfusion detektiert werden. Mutmaßlich f{\"u}hrt dies auch zu einer verbesserten Einbringung von Therapeutika in den Tumor und so zu einer erh{\"o}hten Effizienz der Therapie. In einem weiteren Teil der Patienten scheint jedoch der Effekt der Gef{\"a}ßreduktion zu {\"u}berwiegen und die detektierte Perfusion im Tumor wird durch die Behandlung verringert. Das in dieser Arbeit verwendete MT6-Fibrosarkom-Modell reagierte auf eine anti-angiogenetische Therapie nicht mit einer sonst in murinen Modellen beobachteten Wachstumsreduktion. Die- se erm{\"o}glichte eine so bisher nicht m{\"o}gliche Untersuchung der sekund{\"a}ren Effekte einer anti- angiogenetischen Therapie wie die Medikamenteneinbringung in den Tumor. Die Vaskulatur in MT6-Tumoren zeigte dabei nach einer anti-angiogenetischen Vorbehandlung, die erwarteten Merk-male einer „normalisierten" Vaskulatur wie eine Reduktion der Gef{\"a}ßdichte bei gleichzeitiger Rei- fung der verbleibenden Gef{\"a}ße. Dies f{\"u}hrte jedoch nicht zu einer verbesserten Effizienz einer subsequenten Chemotherapie. Durch Vergleich mit einem weiteren Tumor-Modell, dem 4T1-Modell f{\"u}r ein metastasierendes Mammakarzinom, konnten signifikante Unterschiede im Gef{\"a}ßbild beider Modelle ausgeschlossen werden. Durch mikroskopische Methoden konnte dabei beobachtet werden, dass die Diffusion von Medikamenten aus den Blutgef{\"a}ßen des MT6-Modells im Vergleich zum 4T1-Modell verringert war. Weitere Untersuchungen deuten auf eine Differenz in der Qualit{\"a}t der extrazellul{\"a}ren Matrix der verwendeten Tumor-Modelle. Durch mRNA-Expressionsanalysen konnte die Enzymfamilie der Lysyloxidasen als m{\"o}gliche Ursache f{\"u}r diesen Diffusionsunterschied identi- fiziert werden. Lysyloxidasen katalysieren vor allem die Quervernetzung von Proteinen der Extra- zellul{\"a}rmatrix. Im Weiteren konnte gezeigt werden, dass die Quervernetzung von Matrixproteinen durch Lysyloxidasen urs{\"a}chlich f{\"u}r die Diffusions-Inhibierung kleiner Molek{\"u}le wie das Chemo- therapeutikum Doxorubicin sein kann. Durch spezifische Inhibition der Lysyloxidasen mittels des Inhibitors βAPN konnte diese Diffusions-Inhibition sowohl in vitro als auch im MT6-Tumor-Modell nahezu vollst{\"a}ndig verhindert werden. Die hohe Aktivit{\"a}t von Lysyloxidasen im MT6-Modell stell- te allerdings kein Alleinstellungsmerkmal dieses Modells dar. In weiteren Untersuchungen konnte gezeigt werden, dass Lysyloxidasen in einer Vielzahl von murinen und humanen Tumorzelllinien {\"u}berexprimiert wird. Die Inhibition von Lysyloxidasen durch βAPN konnte dabei in allen unter- suchten Modellen die Einbringung von Medikamenten in den Tumor erh{\"o}hen und k{\"o}nnte so eine sinnvolle adjuvante Maßnahme zur Verbesserung bestehender Chemotherapien darstellen.}, subject = {Lysin-Oxidase}, language = {de} } @article{RymaTylekLiebscheretal.2021, author = {Ryma, Matthias and Tylek, Tina and Liebscher, Julia and Blum, Carina and Fernandez, Robin and B{\"o}hm, Christoph and Kastenm{\"u}ller, Wolfgang and Gasteiger, Georg and Groll, J{\"u}rgen}, title = {Translation of collagen ultrastructure to biomaterial fabrication for material-independent but highly efficient topographic immunomodulation}, series = {Advanced materials}, volume = {33}, journal = {Advanced materials}, number = {33}, doi = {10.1002/adma.202101228}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256381}, year = {2021}, abstract = {Supplement-free induction of cellular differentiation and polarization solely through the topography of materials is an auspicious strategy but has so far significantly lagged behind the efficiency and intensity of media-supplementation-based protocols. Consistent with the idea that 3D structural motifs in the extracellular matrix possess immunomodulatory capacity as part of the natural healing process, it is found in this study that human-monocyte-derived macrophages show a strong M2a-like prohealing polarization when cultured on type I rat-tail collagen fibers but not on collagen I films. Therefore, it is hypothesized that highly aligned nanofibrils also of synthetic polymers, if packed into larger bundles in 3D topographical biomimetic similarity to native collagen I, would induce a localized macrophage polarization. For the automated fabrication of such bundles in a 3D printing manner, the strategy of "melt electrofibrillation" is pioneered by the integration of flow-directed polymer phase separation into melt electrowriting and subsequent selective dissolution of the matrix polymer postprocessing. This process yields nanofiber bundles with a remarkable structural similarity to native collagen I fibers, particularly for medical-grade poly(ε-caprolactone). These biomimetic fibrillar structures indeed induce a pronounced elongation of human-monocyte-derived macrophages and unprecedentedly trigger their M2-like polarization similar in efficacy as interleukin-4 treatment.}, language = {en} } @phdthesis{Roth2003, author = {Roth, Martin}, title = {Functional and developmental characterisation of matrix binding sites in decapentaplegic}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-7542}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {In the last years it became evident that many cytokines do not only bind to their specific cell surface receptors but also interact with components of the extracellular matrix. Mainly in Drosophila, several enzymes were identified, that are involved in glycosaminoglycan synthesis. Mutations in these enzymes mostly result in disturbances of several signaling pathways like hedgehog, wingless, FGF or dpp. In most cases it was, due to these pleiotropic effects, not possible to examine the relevance of matrix interactions for single pathways. The aim of this work was to examine the relevance of matrix interactions for the TGF-ß superfamily member DPP. Based on the fact that DPP is highly homologous to human BMP-2, the basic N-terminus of mature DPP was mutated, which has been shown to contain a heparin-binding site in BMP-2. Thus, a wildtype variant (D-MYC), a deletion variant (D-DEL), which lacked the whole basic part of the N-terminus and a duplication variant (D-DUP), which contained a second copy of the basic core moitiv, were generated. In order to characterise the variants biochemically, they were expressed in E.coli and refolded in a bioactive form. In chicken limbbud assay, the deletion variant was much more active than the wildtype variant, comparable to data of BMP-2. By means of biacore mesurements with the immobilised ectodomain of the high affinity type I receptor thick veins, it could be demonstrated, that the variants differ only in matrix binding and not in their receptor affinity. Different matrix binding was shown by Heparin FPLC. The biological relevance of the matrix interaction of DPP was examined in transgenic flies. To allow expression of the different variants under the control of various Gal4 driver lines, they were cloned behind an UAS-promoter site. In early tracheal development, a strong dependence of DPP signaling on matrix binding was observed. While ectopic expression of the deletion variant caused only minor defects, the branching pattern was strongly disturbed by overexpression of wildtype and duplication variant. Ubiquitous expression of the variants in the wing imaginal disc caused overproliferation of the disc and expansion of the omb target gene expression. The extent of phenotypes correlated with the matrix binding ability of the variants. Corresponding disturbances of the wing vein pattern was observed in adult flies. By the crossing of different dpp allels, transheterozygous animals were created, that lack dpp only in imaginal discs. Expression of the variants under the control of a suitable dpp-Gal4 driver line revealed insights into the biological relevance of matrix binding on DPP gradient formation and specific target gene activation in wing imaginal discs. It was shown, that all variants were able to generate a functional DPP gradient with correct expression of the target genes omb and spalt. Again a correlation between extent of target gene domains and matrix binding ability of the corresponding variants was found. Thus by mutating the N-terminus of DPP, it could be shown that this is responsible for DPP`s matrix interaction. Also the relevance of matrix binding of DPP in different tissues was examined. It turned out, that the reorganisation of tracheal branching by DPP strongly depends on matrix interactions wheras the establishing of a gradient in wing imaginal discs depends only gradually on matrix interactions. Based on these data a model for the action of DPP/TGFßs as morphogens was established. While a deletion of matrix binding leads to a decrease in specific bioactivity of the cytokine, the latter is increased by additional matrix binding sites.}, subject = {Taufliege}, language = {en} } @article{PachelMathesBayeretal.2013, author = {Pachel, Christina and Mathes, Denise and Bayer, Barbara and Dienesch, Charlotte and Wangorsch, Gaby and Heitzmann, Wolfram and Lang, Isabell and Ardehali, Hossein and Ertl, Georg and Dandekar, Thomas and Wajant, Harald and Frantz, Stefan}, title = {Exogenous Administration of a Recombinant Variant of TWEAK Impairs Healing after Myocardial Infarction by Aggravation of Inflammation}, series = {PLoS ONE}, volume = {8}, journal = {PLoS ONE}, number = {11}, doi = {10.1371/journal.pone.0078938}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-129889}, pages = {e78938}, year = {2013}, abstract = {Background: Tumor necrosis factor-like weak inducer of apoptosis (TWEAK) and its receptor fibroblast growth factorinducible 14 (Fn14) are upregulated after myocardial infarction (MI) in both humans and mice. They modulate inflammation and the extracellular matrix, and could therefore be important for healing and remodeling after MI. However, the function of TWEAK after MI remains poorly defined. Methods and results: Following ligation of the left coronary artery, mice were injected twice per week with a recombinant human serum albumin conjugated variant of TWEAK (HSA-Flag-TWEAK), mimicking the activity of soluble TWEAK. Treatment with HSA-Flag-TWEAK resulted in significantly increased mortality in comparison to the placebo group due to myocardial rupture. Infarct size, extracellular matrix remodeling, and apoptosis rates were not different after MI. However, HSA-Flag-TWEAK treatment increased infiltration of proinflammatory cells into the myocardium. Accordingly, depletion of neutrophils prevented cardiac ruptures without modulating all-cause mortality. Conclusion: Treatment of mice with HSA-Flag-TWEAK induces myocardial healing defects after experimental MI. This is mediated by an exaggerated neutrophil infiltration into the myocardium.}, language = {en} } @article{NandaSteinleinHaafetal.2022, author = {Nanda, Indrajit and Steinlein, Claus and Haaf, Thomas and Buhl, Eva M. and Grimm, Domink G. and Friedman, Scott L. and Meurer, Steffen K. and Schr{\"o}der, Sarah K. and Weiskirchen, Ralf}, title = {Genetic characterization of rat hepatic stellate cell line HSC-T6 for in vitro cell line authentication}, series = {Cells}, volume = {11}, journal = {Cells}, number = {11}, issn = {2073-4409}, doi = {10.3390/cells11111783}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-275178}, year = {2022}, abstract = {Immortalized hepatic stellate cells (HSCs) established from mouse, rat, and humans are valuable in vitro models for the biomedical investigation of liver biology. These cell lines are homogenous, thereby providing consistent and reproducible results. They grow more robustly than primary HSCs and provide an unlimited supply of proteins or nucleic acids for biochemical studies. Moreover, they can overcome ethical concerns associated with the use of animal and human tissue and allow for fostering of the 3R principle of replacement, reduction, and refinement proposed in 1959 by William M. S. Russell and Rex L. Burch. Nevertheless, working with continuous cell lines also has some disadvantages. In particular, there are ample examples in which genetic drift and cell misidentification has led to invalid data. Therefore, many journals and granting agencies now recommend proper cell line authentication. We herein describe the genetic characterization of the rat HSC line HSC-T6, which was introduced as a new in vitro model for the study of retinoid metabolism. The consensus chromosome markers, outlined primarily through multicolor spectral karyotyping (SKY), demonstrate that apart from the large derivative chromosome 1 (RNO1), at least two additional chromosomes (RNO4 and RNO7) are found to be in three copies in all metaphases. Additionally, we have defined a short tandem repeat (STR) profile for HSC-T6, including 31 species-specific markers. The typical features of these cells have been further determined by electron microscopy, Western blotting, and Rhodamine-Phalloidin staining. Finally, we have analyzed the transcriptome of HSC-T6 cells by mRNA sequencing (mRNA-Seq) using next generation sequencing (NGS).}, language = {en} } @article{NandaSchroederSteinleinetal.2022, author = {Nanda, Indrajit and Schr{\"o}der, Sarah K. and Steinlein, Claus and Haaf, Thomas and Buhl, Eva M. and Grimm, Domink G. and Weiskirchen, Ralf}, title = {Rat hepatic stellate cell line CFSC-2G: genetic markers and short tandem repeat profile useful for cell line authentication}, series = {Cells}, volume = {11}, journal = {Cells}, number = {18}, issn = {2073-4409}, doi = {10.3390/cells11182900}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-288067}, year = {2022}, abstract = {Hepatic stellate cells (HSCs) are also known as lipocytes, fat-storing cells, perisinusoidal cells, or Ito cells. These liver-specific mesenchymal cells represent about 5\% to 8\% of all liver cells, playing a key role in maintaining the microenvironment of the hepatic sinusoid. Upon chronic liver injury or in primary culture, these cells become activated and transdifferentiate into a contractile phenotype, i.e., the myofibroblast, capable of producing and secreting large quantities of extracellular matrix compounds. Based on their central role in the initiation and progression of chronic liver diseases, cultured HSCs are valuable in vitro tools to study molecular and cellular aspects of liver diseases. However, the isolation of these cells requires special equipment, trained personnel, and in some cases needs approval from respective authorities. To overcome these limitations, several immortalized HSC lines were established. One of these cell lines is CFSC, which was originally established from cirrhotic rat livers induced by carbon tetrachloride. First introduced in 1991, this cell line and derivatives thereof (i.e., CFSC-2G, CFSC-3H, CFSC-5H, and CFSC-8B) are now used in many laboratories as an established in vitro HSC model. We here describe molecular features that are suitable for cell authentication. Importantly, chromosome banding and multicolor spectral karyotyping (SKY) analysis demonstrate that the CFSC-2G genome has accumulated extensive chromosome rearrangements and most chromosomes exist in multiple copies producing a pseudo-triploid karyotype. Furthermore, our study documents a defined short tandem repeat (STR) profile including 31 species-specific markers, and a list of genes expressed in CFSC-2G established by bulk mRNA next-generation sequencing (NGS).}, language = {en} } @article{HorderGuazaLasherasGrummeletal.2021, author = {Horder, Hannes and Guaza Lasheras, Mar and Grummel, Nadine and Nadernezhad, Ali and Herbig, Johannes and Erg{\"u}n, S{\"u}leyman and Teßmar, J{\"o}rg and Groll, J{\"u}rgen and Fabry, Ben and Bauer-Kreisel, Petra and Blunk, Torsten}, title = {Bioprinting and differentiation of adipose-derived stromal cell spheroids for a 3D breast cancer-adipose tissue model}, series = {Cells}, volume = {10}, journal = {Cells}, number = {4}, doi = {10.3390/cells10040803}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-236496}, year = {2021}, abstract = {Biofabrication, including printing technologies, has emerged as a powerful approach to the design of disease models, such as in cancer research. In breast cancer, adipose tissue has been acknowledged as an important part of the tumor microenvironment favoring tumor progression. Therefore, in this study, a 3D-printed breast cancer model for facilitating investigations into cancer cell-adipocyte interaction was developed. First, we focused on the printability of human adipose-derived stromal cell (ASC) spheroids in an extrusion-based bioprinting setup and the adipogenic differentiation within printed spheroids into adipose microtissues. The printing process was optimized in terms of spheroid viability and homogeneous spheroid distribution in a hyaluronic acid-based bioink. Adipogenic differentiation after printing was demonstrated by lipid accumulation, expression of adipogenic marker genes, and an adipogenic ECM profile. Subsequently, a breast cancer cell (MDA-MB-231) compartment was printed onto the adipose tissue constructs. After nine days of co-culture, we observed a cancer cell-induced reduction of the lipid content and a remodeling of the ECM within the adipose tissues, with increased fibronectin, collagen I and collagen VI expression. Together, our data demonstrate that 3D-printed breast cancer-adipose tissue models can recapitulate important aspects of the complex cell-cell and cell-matrix interplay within the tumor-stroma microenvironment}, language = {en} }