@phdthesis{Heffels2012,
  author    = {Heffels, Karl-Heinz},
  title     = {Functional nanofibres for regenerative medicine},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-75684},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2012},
  abstract  = {This thesis concerned the design and examination of a scaffold for tissue engineering applications. The template for the presented scaffold came from nature itself: the intercellular space in tissues that provides structure and support to the cells of the respective tissue, known as extracellular matrix (ECM). Fibres are a predominant characteristic feature of ECM, providing adhesion sites for cell-matrix interactions. In this dissertation a fibrous mesh was generated using the electrospinning technique to mimic the fibrous structure of the ECM. Two base polymers were explored: a biodegradable polyester, poly(D,L-lactide-co-glycolide); and a functional PEG-based star polymer, NCO-sP(EO-stat-PO). This topic was described in three major parts: the first part was materials based, concerning the chemical design and characterisation of the polymer scaffolds; the focus was then shifted to the cellular response to this fibrous scaffold; and finally the in vivo performance of the material was preliminarily assessed. The first steps towards an electrospun mesh started with adjusting the spinning parameters for the generation of homogeneous fibres. As reported in Chapter 3 a suitable setup configuration was on the one hand comprised of a spinning solution that consisted of 28.5 w/v\% PLGA RG 504 and 6 w/v\% NCO-sP(EO-stat-PO) in 450 µL acetone, 50 µL DMSO and 10 µL of an aqueous trifluoroacetic acid solution. On the other hand an ideal spinning behaviour was achieved at process parameters such as a flow rate of 0.5 mL/h, spinneret to collector distance of 12-16 cm and a voltage of 13 kV. The NCO-sP(EO-stat-PO) containing fibres proved to be highly hydrophilic as the functional additive was present on the fibre surface. Furthermore, the fibres featured a bulk degradation pattern as a consequence of the proportion of PLGA. Besides the morphologic similarity to ECM fibres, the functionality of the electrospun fibres is also decisive for a successful ECM mimicry. In Chapter 4, the passive as well as active functionality of the fibres was investigated. The fibres were required to be protein repellent to prevent an unspecific cell adhesion. This was proven as even 6.5 \% sP(EO-stat-PO) in the PLGA fibres reduced any unspecific protein adsorption of bovine serum albumin and foetal calf serum to less than 1 \%. However, avidin based proteins attached to the fibres. This adhesion process was avoided by an additional fibre surface treatment with glycidol. The active functionalisation of NCO-sP(EO-stat-PO)/PLGA fibres was investigated with two fluorescent dyes and biocytin. A threefold, chemically orthogonal, fibre modification was achieved with these dyes. The chapters about the chemical and mechanical properties laid the basis for the in vitro chapters where a specific fibre functionalisation with peptides was conducted to analyse the cell adhesion and biochemical expressions. Beginning with fibroblasts in Chapter 5 the focus was on the specific cell adhesion on the electrospun fibres. While NCO-sP(EO-stat-PO)/PLGA fibres without peptides did not allow any adhesion of fibroblasts, a fibre modification with GRGDS (an adhesion mediating peptide sequence) induced the adhesion and spreading of human dermal fibroblasts on the fibrous scaffolds. The control sequence GRGES that has no adhesion mediating qualities did not lead to any cell adhesion as observed on fibres without modifications. While the experiments of Chapter 5 were a proof-of-concept, in Chapter 6 a possible application in cartilage tissue engineering was examined. Therefore, primary human chondrocytes were seeded on fibrous scaffolds with various peptide sequences. Though the chondrocytes exhibited high viability on all scaffolds, an active interaction of cells and fibres was only found for the decorin derived sequence CGKLER. Live-cell-imaging revealed both cell attachment and migration within CGKLER-modified meshes. As chondrocytes undergo a de-differentiation towards a fibroblast-like phenotype, the chondrogenic re-differentiation on these scaffolds was investigated in a long term cell culture experiment of 28 days. Therefore, the glycosaminoglycan production was analysed as well as the mRNA expression of genes coding for collagen I and II, aggrecan and proteoglycan 4. In general only low amounts of the chondrogenic markers were measured, suggesting no chondrogenic differentiation. For conclusive evidence follow-up experiments are required that support or reject the findings. The success of an implant for tissue engineering relies not only on the response of the targeted cell type but also on the immune reaction caused by leukocytes. Hence, Chapter 7 dealt with primary human macrophages and their behaviour and phenotype on two-dimensional (2D) surfaces compared to three-dimensional (3D) fibrous substrates. It was found that the general non-adhesiveness of NCO-sP(EO-stat-PO) surfaces and fibres does not apply to macrophages. The cells aligned along the fibres on surfaces or resided in the pores of the meshes. On flat surfaces without 3D structure the macrophages showed a retarded adhesion kinetic accompanied with a high migratory activity indicating their search for a topographical feature to adhere to. Moreover, a detailed investigation of cell surface markers and chemokine signalling revealed that macrophages on 2D surfaces exhibited surface markers indicating a healing phenotype while the chemokine release suggested a pro-inflammatory phenotype. Interestingly, the opposite situation was found on 3D fibrous substrates with pro-inflammatory surface markers and pro-angiogenic cytokine release. As the immune response largely depends on cellular communication, it was concluded that the NCO-sP(EO-stat-PO)/PLGA fibres induce an adequate immune response with promising prospects to be used in a scaffold for tissue engineering. The final chapter of this thesis reports on a first in vivo study conducted with the presented electrospun fibres. Here, the fibres were combined with a polypropylene mesh for the treatment of diaphragmatic hernias in a rabbit model. Two scaffold series were described that differed in the overall surface morphology: while the fibres of Series A were incorporated into a thick gel of NCO-sP(EO-stat-PO), the scaffolds of Series B featured only a thin hydrogel layer so that the overall fibrous structure could be retained. After four months in vivo the treated defects of the diaphragm were significantly smaller and filled mainly with scar tissue. Thick granulomas occurred on scaffolds of Series A while the implants of Series B did not induce any granuloma formation. As a consequence of the generally positive outcome of this study, the constructs were enhanced with a drug release system in a follow-up project. The incorporated drug was the MMP-inhibitor Ilomastat which is intended to reduce the formation of scar tissue. In conclusion, the simple and straight forward fabrication, the threefold functionalisation possibility and general versatile applicability makes the meshes of NCO-sP(EO-stat-PO)/PLGA fibres a promising candidate to be applied in tissue engineering scaffolds in the future.},
  subject      = {Nanofaser},
  language  = {en}
}
@article{GrebinykPrylutskaBuchelnikovetal.2019,
  author    = {Grebinyk, Anna and Prylutska, Svitlana and Buchelnikov, Anatoliy and Tverdokhleb, Nina and Grebinyk, Sergii and Evstigneev, Maxim and Matyshevska, Olga and Cherepanov, Vsevolod and Prylutskyy, Yuriy and Yashchuk, Valeriy and Naumovets, Anton and Ritter, Uwe and Dandekar, Thomas and Frohme, Marcus},
  title     = {C60 fullerene as an effective nanoplatform of alkaloid Berberine delivery into leukemic cells},
  series = {Pharmaceutics},
  volume    = {11},
  journal   = {Pharmaceutics},
  number    = {11},
  issn      = {1999-4923},
  doi       = {10.3390/pharmaceutics11110586},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193216},
  pages     = {586},
  year      = {2019},
  abstract  = {A herbal alkaloid Berberine (Ber), used for centuries in Ayurvedic, Chinese, Middle-Eastern, and native American folk medicines, is nowadays proved to function as a safe anticancer agent. Yet, its poor water solubility, stability, and bioavailability hinder clinical application. In this study, we have explored a nanosized carbon nanoparticle—C60 fullerene (C60)—for optimized Ber delivery into leukemic cells. Water dispersions of noncovalent C60-Ber nanocomplexes in the 1:2, 1:1, and 2:1 molar ratios were prepared. UV-Vis spectroscopy, dynamic light scattering (DLS), and atomic force microscopy (AFM) evidenced a complexation of the Ber cation with the negatively charged C60 molecule. The computer simulation showed that π-stacking dominates in Ber and C\(_{60}\) binding in an aqueous solution. Complexation with C\(_{60}\) was found to promote Ber intracellular uptake. By increasing C\(_{60}\) concentration, the C\(_{60}\)-Ber nanocomplexes exhibited higher antiproliferative potential towards CCRF-CEM cells, in accordance with the following order: free Ber < 1:2 < 1:1 < 2:1 (the most toxic). The activation of caspase 3/7 and accumulation in the sub-G1 phase of CCRF-CEM cells treated with C\(_{60}\)-Ber nanocomplexes evidenced apoptosis induction. Thus, this study indicates that the fast and easy noncovalent complexation of alkaloid Ber with C\(_{60}\) improved its in vitro efficiency against cancer cells.},
  language  = {en}
}
@phdthesis{Schweeberg2019,
  author    = {Schweeberg, Sarah},
  title     = {Biomedizinische Anwendung von Nanodiamant: Untersuchungen zu den Wechselwirkungen mit der biologischen Umgebung und zur gezielten Wirkstofffreisetzung},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-174619},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Nanodiamant bietet in der Medizin und in der Biologie zahlreiche Anwendungsm{\"o}glichkeiten aufgrund der guten Biokompatibilit{\"a}t und geringen Toxizit{\"a}t. Durch die umfangreichen Funktionalisierungsm{\"o}glichkeiten der Oberfl{\"a}che der nanometergroßen Partikel k{\"o}nnen viele unterschiedliche Wirkstoffe, Rezeptormolek{\"u}le oder Peptidsequenzen angebunden werden ,die zusammen mit Nanodiamant ein anderes, durchaus besseres Wirkprofil aufweisen als der Wirkstoff allein. Ziel dieser Arbeit war die Synthese eines pH-labilen Linkersystems, dass hydroxylhaltige Wirkstoffe kovalent bindet und zusammen mit Nanodiamant in die Zelle, in der ein saurer pH-Wert herrscht, eingeschleust werden. {\"U}ber die {\"A}nderung des pH-Wertes in der Zelle soll der Wirkstoff freigesetzt werden und seine Wirkung entfalten k{\"o}nnen. Weiterhin wurde ein pH-labiles Linkersystem auf der Basis eines Hydrazons hergestellt. {\"U}ber das synthetisierte Hydrazinderivat k{\"o}nnen Wirkstoffe, die {\"u}ber eine Aldehyd- oder Ketonfunktion verf{\"u}gen angebunden werden und pH-labil in der Zelle freigesetzt werden. Zus{\"a}tzlich tr{\"a}gt der Nanodiamant ein kovalent angebundenes Targeting-Molek{\"u}l, welches eine verbesserte Adressierung der Wirkorte gew{\"a}hr¬leisten soll. Die Freisetzung wurde mittels UV-Vis-Spektroskopie detektiert und ausgewertet. Neben der spezifischen Funktionalisierung von Nanodiamant besitzt auch die Interaktion der Nanodiamantpartikel mit biologischen Medien eine besondere Bedeutung f{\"u}r zuk{\"u}nftige biomedizinische Anwendungen. Wenn die Partikeloberfl{\"a}che durch Proteinadsorption gegen{\"u}ber dem Wirkort abgeschirmt wird, so kann der angebundene Wirkstoff gegebenenfalls nicht freigesetzt werden und somit nicht seine Wirkung entfalten und bleibt letztlich ungenutzt. So war es von besonderem Interesse die Wechselwirkungen von Nanodiamant in Humanserum und auch weiteren physiologischen Medien zu untersuchen. Dabei wurden sowohl freie Nanodiamantpartikel als auch solche, die auf klinisch bereits eingesetzten Ger{\"u}stmaterialien im Bereich der Therapie großer Knochendefekte adsorbiert waren, untersucht. Auch wurden die Wechselwirkungen von Nanodiamant mit der physiologischen Umgebung untersucht, die zur Agglomeration der Nanopartikel f{\"u}hren k{\"o}nnen. Es wurde ein unter¬schiedliches Agglomerationsverhalten der Nanodiamanten in w{\"a}ssriger Umgebung verglichen mit Nanodiamanten in physiologischen Medien sowie deren Stabilit{\"a}t im Serum beobachtet. Durch die in dieser Arbeit vorgestellten Untersuchungen konnten wichtige Erkenntnisse zur Wechselwirkung verschieden pr{\"a}parierter und funktionalisierter Nanodiamanten mit physiologisch relevanten Umgebungen sowie zu stimuli-responsiven Wirkstofffreisetzung aus Nanodiamant-Konjugaten gewonnen werden. Zudem wurde mit der Untersuchung der angelagerten Proteine um Nanodiamant ein erster Schritt in Richtung eines umfassenden Verst{\"a}ndnisses der Wechselwirkung dieses Materials mit biologischen Umgebungen unternommen. Auch wenn diese Wechselwirkungen sehr komplex sind, so sind erste Aussagen bez{\"u}glich der Art der angelagerten Proteine m{\"o}glich. Erste Versuche der Stabilisierung von Nanodiamant in physiologischen Medien wurden ebenfalls erfolgreich durchgef{\"u}hrt und zeigen eine effiziente und einfache M{\"o}glichkeit, Nanodiamant in biologischen Medien vor der Agglomeration zu bewahren. Die im Rahmen dieser Arbeit gewonnen Erkenntnisse bez{\"u}glich mehrfacher Funktionalisierungsm{\"o}glichkeiten von Nanodiamant sowie dessen Stabilisierung in physiologischen Medien zeigen die breite Anwendungsm{\"o}glichkeit und das enorme Potential von Nanodiamant im Bereich medizinischer und biologischer Anwendungen auf.},
  subject      = {Nanopartikel},
  language  = {de}
}