@phdthesis{Albert2019, author = {Albert, Michael}, title = {Intelligent analysis of medical data in a generic telemedicine infrastructure}, isbn = {978-3-945459-26-3 (Online)}, doi = {10.25972/OPUS-17421}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-174213}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Telemedicine uses telecommunication and information technology to provide health care services over spatial distances. In the upcoming demographic changes towards an older average population age, especially rural areas suffer from a decreasing doctor to patient ratio as well as a limited amount of available medical specialists in acceptable distance. These areas could benefit the most from telemedicine applications as they are known to improve access to medical services, medical expertise and can also help to mitigate critical or emergency situations. Although the possibilities of telemedicine applications exist in the entire range of healthcare, current systems focus on one specific disease while using dedicated hardware to connect the patient with the supervising telemedicine center. This thesis describes the development of a telemedical system which follows a new generic design approach. This bridges the gap of existing approaches that only tackle one specific application. The proposed system on the contrary aims at supporting as many diseases and use cases as possible by taking all the stakeholders into account at the same time. To address the usability and acceptance of the system it is designed to use standardized hardware like commercial medical sensors and smartphones for collecting medical data of the patients and transmitting them to the telemedical center. The smartphone can also act as interface to the patient for health questionnaires or feedback. The system can handle the collection and transport of medical data, analysis and visualization of the data as well as providing a real time communication with video and audio between the users. On top of the generic telemedical framework the issue of scalability is addressed by integrating a rule-based analysis tool for the medical data. Rules can be easily created by medical personnel via a visual editor and can be personalized for each patient. The rule-based analysis tool is extended by multiple options for visualization of the data, mechanisms to handle complex rules and options for performing actions like raising alarms or sending automated messages. It is sometimes hard for the medical experts to formulate their knowledge into rules and there may be information in the medical data that is not yet known. This is why a machine learning module was integrated into the system. It uses the incoming medical data of the patients to learn new rules that are then presented to the medical personnel for inspection. This is in line with European legislation where the human still needs to be in charge of such decisions. Overall, we were able to show the benefit of the generic approach by evaluating it in three completely different medical use cases derived from specific application needs: monitoring of COPD (chronic obstructive pulmonary disease) patients, support of patients performing dialysis at home and councils of intensive-care experts. In addition the system was used for a non-medical use case: monitoring and optimization of industrial machines and robots. In all of the mentioned cases, we were able to prove the robustness of the generic approach with real users of the corresponding domain. This is why we can propose this approach for future development of telemedical systems.}, subject = {Telemedizin}, language = {en} } @techreport{AlfredssonKasslerVestinetal.2022, type = {Working Paper}, author = {Alfredsson, Rebecka and Kassler, Andreas and Vestin, Jonathan and Pieska, Marcus and Amend, Markus}, title = {Accelerating a Transport Layer based 5G Multi-Access Proxy on SmartNIC}, series = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, journal = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)}, doi = {10.25972/OPUS-28079}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280798}, pages = {4}, year = {2022}, abstract = {Utilizing multiple access technologies such as 5G, 4G, and Wi-Fi within a coherent framework is currently standardized by 3GPP within 5G ATSSS. Indeed, distributing packets over multiple networks can lead to increased robustness, resiliency and capacity. A key part of such a framework is the multi-access proxy, which transparently distributes packets over multiple paths. As the proxy needs to serve thousands of customers, scalability and performance are crucial for operator deployments. In this paper, we leverage recent advancements in data plane programming, implement a multi-access proxy based on the MP-DCCP tunneling approach in P4 and hardware accelerate it by deploying the pipeline on a smartNIC. This is challenging due to the complex scheduling and congestion control operations involved. We present our pipeline and data structures design for congestion control and packet scheduling state management. Initial measurements in our testbed show that packet latency is in the range of 25 μs demonstrating the feasibility of our approach.}, subject = {Datennetz}, language = {en} } @article{AliMontenegro2016, author = {Ali, Qasim and Montenegro, Sergio}, title = {Decentralized control for scalable quadcopter formations}, series = {International Journal of Aerospace Engineering}, volume = {2016}, journal = {International Journal of Aerospace Engineering}, doi = {10.1155/2016/9108983}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146704}, pages = {9108983}, year = {2016}, abstract = {An innovative framework has been developed for teamwork of two quadcopter formations, each having its specified formation geometry, assigned task, and matching control scheme. Position control for quadcopters in one of the formations has been implemented through a Linear Quadratic Regulator Proportional Integral (LQR PI) control scheme based on explicit model following scheme. Quadcopters in the other formation are controlled through LQR PI servomechanism control scheme. These two control schemes are compared in terms of their performance and control effort. Both formations are commanded by respective ground stations through virtual leaders. Quadcopters in formations are able to track desired trajectories as well as hovering at desired points for selected time duration. In case of communication loss between ground station and any of the quadcopters, the neighboring quadcopter provides the command data, received from the ground station, to the affected unit. Proposed control schemes have been validated through extensive simulations using MATLAB®/Simulink® that provided favorable results.}, language = {en} } @article{AliMontenegro2016, author = {Ali, Qasim and Montenegro, Sergio}, title = {Explicit Model Following Distributed Control Scheme for Formation Flying of Mini UAVs}, series = {IEEE Access}, volume = {4}, journal = {IEEE Access}, number = {397-406}, doi = {10.1109/ACCESS.2016.2517203}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146061}, year = {2016}, abstract = {A centralized heterogeneous formation flight position control scheme has been formulated using an explicit model following design, based on a Linear Quadratic Regulator Proportional Integral (LQR PI) controller. The leader quadcopter is a stable reference model with desired dynamics whose output is perfectly tracked by the two wingmen quadcopters. The leader itself is controlled through the pole placement control method with desired stability characteristics, while the two followers are controlled through a robust and adaptive LQR PI control method. Selected 3-D formation geometry and static stability are maintained under a number of possible perturbations. With this control scheme, formation geometry may also be switched to any arbitrary shape during flight, provided a suitable collision avoidance mechanism is incorporated. In case of communication loss between the leader and any of the followers, the other follower provides the data, received from the leader, to the affected follower. The stability of the closed-loop system has been analyzed using singular values. The proposed approach for the tightly coupled formation flight of mini unmanned aerial vehicles has been validated with the help of extensive simulations using MATLAB/Simulink, which provided promising results.}, language = {en} } @inproceedings{AliMontenegro2015, author = {Ali, Qasim and Montenegro, Sergio}, title = {A Simple Approach to Quadrocopter Formation Flying Test Setup for Education and Development}, series = {INTED2015 Proceedings}, booktitle = {INTED2015 Proceedings}, publisher = {International Academy of Technology, Education and Development (IATED)}, isbn = {978-84-606-5763-7}, issn = {2340-1079}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-114495}, pages = {2776 -- 2784}, year = {2015}, abstract = {A simple test setup has been developed at Institute of Aerospace Information Technology, University of W{\"u}rzburg, Germany to realize basic functionalities for formation flight of quadrocopters. The test environment is planned to be utilized for developing and validating the algorithms for formation flying capability in real environment as well as for education purpose. An already existing test bed for single quadrocopter was extended with necessary inter-communication and distributed control mechanism to test the algorithms for formation flights in 2 degrees of freedom (roll / pitch). This study encompasses the domain of communication, control engineering and embedded systems programming. Bluetooth protocol has been used for inter-communication between two quadrocopters. A simple approach of PID control in combination with Kalman filter has been exploited. MATLAB Instrument Control Toolbox has been used for data display, plotting and analysis. Plots can be drawn in real-time and received information can also be stored in the form of files for later use and analysis. The test setup has been developed indigenously and at considerably low cost. Emphasis has been placed on simplicity to facilitate students learning process. Several lessons have been learnt during the course of development of this setup. Proposed setup is quite flexible that can be modified as per changing requirements.}, subject = {Flugk{\"o}rper}, language = {en} } @article{AliMontenegro2014, author = {Ali, Quasim and Montenegro, Sergio}, title = {A Matlab Implementation of Differential GPS for Low-cost GPS Receivers}, doi = {10.12716/1001.08.03.03}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-113618}, year = {2014}, abstract = {A number of public codes exist for GPS positioning and baseline determination in off-line mode. However, no software code exists for DGPS exploiting correction factors at base stations, without relying on double difference information. In order to accomplish it, a methodology is introduced in MATLAB environment for DGPS using C/A pseudoranges on single frequency L1 only to make it feasible for low-cost GPS receivers. Our base station is at accurately surveyed reference point. Pseudoranges and geometric ranges are compared at base station to compute the correction factors. These correction factors are then handed over to rover for all valid satellites observed during an epoch. The rover takes it into account for its own true position determination for corresponding epoch. In order to validate the proposed algorithm, our rover is also placed at a pre-determined location. The proposed code is an appropriate and simple to use tool for post-processing of GPS raw data for accurate position determination of a rover e.g. Unmanned Aerial Vehicle during post-mission analysis.}, language = {en} } @article{ArhondakisFrousiosIliopoulosetal.2011, author = {Arhondakis, Stilianos and Frousios, Kimon and Iliopoulos, Costas S. and Pissis, Solon P. and Tischler, German and Kossida, Sophia}, title = {Transcriptome map of mouse isochores}, series = {BMC Genomics}, volume = {12}, journal = {BMC Genomics}, number = {511}, doi = {10.1186/1471-2164-12-511}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142773}, pages = {1-9}, year = {2011}, abstract = {Background: The availability of fully sequenced genomes and the implementation of transcriptome technologies have increased the studies investigating the expression profiles for a variety of tissues, conditions, and species. In this study, using RNA-seq data for three distinct tissues (brain, liver, and muscle), we investigate how base composition affects mammalian gene expression, an issue of prime practical and evolutionary interest. Results: We present the transcriptome map of the mouse isochores (DNA segments with a fairly homogeneous base composition) for the three different tissues and the effects of isochores' base composition on their expression activity. Our analyses also cover the relations between the genes' expression activity and their localization in the isochore families. Conclusions: This study is the first where next-generation sequencing data are used to associate the effects of both genomic and genic compositional properties to their corresponding expression activity. Our findings confirm previous results, and further support the existence of a relationship between isochores and gene expression. This relationship corroborates that isochores are primarily a product of evolutionary adaptation rather than a simple by-product of neutral evolutionary processes.}, language = {en} } @phdthesis{Aschenbrenner2017, author = {Aschenbrenner, Doris}, title = {Human Robot Interaction Concepts for Human Supervisory Control and Telemaintenance Applications in an Industry 4.0 Environment}, isbn = {978-3-945459-18-8}, doi = {10.25972/OPUS-15052}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-150520}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {While teleoperation of technical highly sophisticated systems has already been a wide field of research, especially for space and robotics applications, the automation industry has not yet benefited from its results. Besides the established fields of application, also production lines with industrial robots and the surrounding plant components are in need of being remotely accessible. This is especially critical for maintenance or if an unexpected problem cannot be solved by the local specialists. Special machine manufacturers, especially robotics companies, sell their technology worldwide. Some factories, for example in emerging economies, lack qualified personnel for repair and maintenance tasks. When a severe failure occurs, an expert of the manufacturer needs to fly there, which leads to long down times of the machine or even the whole production line. With the development of data networks, a huge part of those travels can be omitted, if appropriate teleoperation equipment is provided. This thesis describes the development of a telemaintenance system, which was established in an active production line for research purposes. The customer production site of Braun in Marktheidenfeld, a factory which belongs to Procter \& Gamble, consists of a six-axis cartesian industrial robot by KUKA Industries, a two-component injection molding system and an assembly unit. The plant produces plastic parts for electric toothbrushes. In the research projects "MainTelRob" and "Bayern.digital", during which this plant was utilised, the Zentrum f{\"u}r Telematik e.V. (ZfT) and its project partners develop novel technical approaches and procedures for modern telemaintenance. The term "telemaintenance" hereby refers to the integration of computer science and communication technologies into the maintenance strategy. It is particularly interesting for high-grade capital-intensive goods like industrial robots. Typical telemaintenance tasks are for example the analysis of a robot failure or difficult repair operations. The service department of KUKA Industries is responsible for the worldwide distributed customers who own more than one robot. Currently such tasks are offered via phone support and service staff which travels abroad. They want to expand their service activities on telemaintenance and struggle with the high demands of teleoperation especially regarding security infrastructure. In addition, the facility in Marktheidenfeld has to keep up with the high international standards of Procter \& Gamble and wants to minimize machine downtimes. Like 71.6 \% of all German companies, P\&G sees a huge potential for early information on their production system, but complains about the insufficient quality and the lack of currentness of data. The main research focus of this work lies on the human machine interface for all human tasks in a telemaintenance setup. This thesis provides own work in the use of a mobile device in context of maintenance, describes new tools on asynchronous remote analysis and puts all parts together in an integrated telemaintenance infrastructure. With the help of Augmented Reality, the user performance and satisfaction could be raised. A special regard is put upon the situation awareness of the remote expert realized by different camera viewpoints. In detail the work consists of: - Support of maintenance tasks with a mobile device - Development and evaluation of a context-aware inspection tool - Comparison of a new touch-based mobile robot programming device to the former teach pendant - Study on Augmented Reality support for repair tasks with a mobile device - Condition monitoring for a specific plant with industrial robot - Human computer interaction for remote analysis of a single plant cycle - A big data analysis tool for a multitude of cycles and similar plants - 3D process visualization for a specific plant cycle with additional virtual information - Network architecture in hardware, software and network infrastructure - Mobile device computer supported collaborative work for telemaintenance - Motor exchange telemaintenance example in running production environment - Augmented reality supported remote plant visualization for better situation awareness}, subject = {Fernwartung}, language = {en} } @phdthesis{Atzmueller2006, author = {Atzm{\"u}ller, Martin}, title = {Knowledge-Intensive Subgroup Mining - Techniques for Automatic and Interactive Discovery}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-21004}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {Data mining has proved its significance in various domains and applications. As an important subfield of the general data mining task, subgroup mining can be used, e.g., for marketing purposes in business domains, or for quality profiling and analysis in medical domains. The goal is to efficiently discover novel, potentially useful and ultimately interesting knowledge. However, in real-world situations these requirements often cannot be fulfilled, e.g., if the applied methods do not scale for large data sets, if too many results are presented to the user, or if many of the discovered patterns are already known to the user. This thesis proposes a combination of several techniques in order to cope with the sketched problems: We discuss automatic methods, including heuristic and exhaustive approaches, and especially present the novel SD-Map algorithm for exhaustive subgroup discovery that is fast and effective. For an interactive approach we describe techniques for subgroup introspection and analysis, and we present advanced visualization methods, e.g., the zoomtable that directly shows the most important parameters of a subgroup and that can be used for optimization and exploration. We also describe various visualizations for subgroup comparison and evaluation in order to support the user during these essential steps. Furthermore, we propose to include possibly available background knowledge that is easy to formalize into the mining process. We can utilize the knowledge in many ways: To focus the search process, to restrict the search space, and ultimately to increase the efficiency of the discovery method. We especially present background knowledge to be applied for filtering the elements of the problem domain, for constructing abstractions, for aggregating values of attributes, and for the post-processing of the discovered set of patterns. Finally, the techniques are combined into a knowledge-intensive process supporting both automatic and interactive methods for subgroup mining. The practical significance of the proposed approach strongly depends on the available tools. We introduce the VIKAMINE system as a highly-integrated environment for knowledge-intensive active subgroup mining. Also, we present an evaluation consisting of two parts: With respect to objective evaluation criteria, i.e., comparing the efficiency and the effectiveness of the subgroup discovery methods, we provide an experimental evaluation using generated data. For that task we present a novel data generator that allows a simple and intuitive specification of the data characteristics. The results of the experimental evaluation indicate that the novel SD-Map method outperforms the other described algorithms using data sets similar to the intended application concerning the efficiency, and also with respect to precision and recall for the heuristic methods. Subjective evaluation criteria include the user acceptance, the benefit of the approach, and the interestingness of the results. We present five case studies utilizing the presented techniques: The approach has been successfully implemented in medical and technical applications using real-world data sets. The method was very well accepted by the users that were able to discover novel, useful, and interesting knowledge.}, subject = {Data Mining}, language = {en} } @phdthesis{Baier1998, author = {Baier, Herbert}, title = {Operators of Higher Order}, publisher = {Shaker Verlag}, isbn = {3-8265-4008-5}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-140799}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {V, 95}, year = {1998}, abstract = {Motivated by results on interactive proof systems we investigate the computational power of quantifiers applied to well-known complexity classes. In special, we are interested in existential, universal and probabilistic bounded error quantifiers ranging over words and sets of words, i.e. oracles if we think in a Turing machine model. In addition to the standard oracle access mechanism, we also consider quantifiers ranging over oracles to which access is restricted in a certain way.}, subject = {Komplexit{\"a}tstheorie}, language = {en} }