@phdthesis{Abbas2024,
  author    = {Abbas, Eid Nagy Eid},
  title     = {Demotic Texts from Medinet Habu (Philological, Paleographical, and Cultural Study)},
  doi       = {10.25972/OPUS-35265},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352653},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The current study presents a new a group of Demotic ostraca in the belongings of the Cairo Museum. A large part of this group stem from Medinet Habu in the western bank of modern Luxor in Upper Egypt and was discovered in the beginning of the thirties of the last century by the Chicago Oriental Institute (recently renamed as Institute for the Study of Ancient Cultures 'ISAC'). A small portion of the collection under consideration come from other Upper Egyptian provenances including Gebelein, Edfu, Kom Ombo, and possibly elsewhere in Thebes. The main goal of the present dissertation is to decipher, translate, and provide a philological, paleographical, and cultural analysis of the group of texts in question. The results of this study are spread over two main parts, the first of which is dedicated to the main and largest part of the collection, i.e. ostraca from Medinet Habu, while the second is concerned with ostraca from other places. The first part comprises of five sections beginning with receipts of money and in-kind payments including some receipts for the payments of the different capitation charges in the Ptolemaic and Roman Periods, a few for land-related payments, as well as others related to different Ptolemaic monopolies or trades such as a receipt for the price of oil, one for the linen tax, in addition to a unique receipt for the rarely attested fish tax. The second section includes accounts and lists of different kinds be it monetary, in-kind, agriculture, or any other type of lists or accounts that record different everyday transactions. The following section presents a relatively different type of lists, namely lists of personal names. The fourth section incorporates a variety of texts of different concerns, e.g. texts of religious nature, letters, temples oaths, or other private documents. Unidentified texts occupy the fifth and final section of the first part. The second part of the study, which comprises texts that originate from different Upper Egyptian localities, includes three sections, i.e. receipts, accounts, and lists of names.},
  language  = {en}
}
@phdthesis{Adhikari2024,
  author    = {Adhikari, Bikash},
  title     = {Targeted degradation of Myc-interacting oncoproteins},
  doi       = {10.25972/OPUS-31732},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-317326},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The hallmark oncoprotein Myc is a major driver of tumorigenesis in various human cancer entities. However, Myc's structural features make it challenging to develop small molecules against it. A promising strategy to indirectly inhibit the function of Myc is by targeting its interactors. Many Myc-interacting proteins have reported scaffolding functions which are difficult to target using conventional occupancy- driven inhibitors. Thus, in this thesis, the proteolysis targeting chimera (PROTAC) approach was used to target two oncoproteins interacting with Myc which promote the oncogenicity of Myc, Aurora-A and WDR5. PROTACs are bifunctional small molecules that bind to the target protein with one ligand and recruit a cellular E3- ligase with the other ligand to induce target degradation via the ubiquitin- proteasome system. So far, the most widely used E3-ligases for PROTAC development are Cereblon (CRBN) and von Hippel-Lindau tumor suppressor (VHL). Furthermore, there are cases of incompatibility between some E3-ligases and proteins to bring about degradation. Hence there is a need to explore new E3- ligases and a demand for a tool to predict degradative E3-ligases for the target protein in the PROTAC field. In the first part, a highly specific mitotic kinase Aurora-A degrader, JB170, was developed. This compound utilized Aurora-A inhibitor alisertib as the target ligand and thalidomide as the E3-ligase CRBN harness. The specificity of JB170 and the ternary complex formation was supported by the interactions between Aurora-A and CRBN. The PROTAC-mediated degradation of Aurora-A induced a distinct S- phase defect rather than mitotic arrest, shown by its catalytic inhibition. The finding demonstrates that Aurora-A has a non-catalytic role in the S-phase. Furthermore, the degradation of Aurora-A led to apoptosis in various cancer cell lines. In the second part, two different series of WDR5 PROTACs based on two protein- protein inhibitors of WDR5 were evaluated. The most efficient degraders from both series recruited VHL as a E3-ligase and showed partial degradation of WDR5. In addition, the degradation efficiency of the PROTACs was significantly affected by the linker nature and length, highlighting the importance of linker length and composition in PROTAC design. The degraders showed modest proliferation defects at best in cancer cell lines. However, overexpression of VHL increased the degradation efficiency and the antiproliferative effect of the PROTACs. In the last part, a rapamycin-based assay was developed to predict the degradative E3-ligase for a target. The assay was validated using the WDR5/VHL and Aurora- A/CRBN pairs. The result that WDR5 is degraded by VHL but not CRBN and Aurora-A is degraded by CRBN, matches observations made with PROTACs. This technique will be used in the future to find effective tissue-specific and essential E3-ligases for targeted degradation of oncoproteins using PROTACs. Collectively, the work presented here provides a strategy to improve PROTAC development and a starting point for developing Aurora-A and WDR5 PROTACs for cancer therapy.},
  subject      = {Degradation},
  language  = {en}
}
@misc{AicheleHeurichMuelleretal.2024,
  author    = {Aichele, Thorsten and Heurich, Tina and M{\"u}ller, Noemi and Odenbreit, Carina and Radičević, Jana and Raith, Sarah and R{\"o}seler, Christoph and Zaus, Petra},
  title     = {7 + 4. SEED - Scenarios for the Use of ePortfolios in Digital Learning},
  doi       = {10.25972/OPUS-37009},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-370091},
  pages     = {41},
  year      = {2024},
  abstract  = {The SEED project is developing ePortfolios for teaching at the Julius-Maximilians-Universit{\"a}t W{\"u}rzburg. ePortfolios make it possible to further develop teaching and learning in a competence-oriented manner and to strengthen the individual reflection aspect of academic studies to support training professional skills. A total of seven use cases were developed. They provide examples of how ePortfolios can be used in university teaching. Four exam variants help to illustrate both subject-specific and reflective components when examining using ePortfolios.},
  subject      = {ePortfolio},
  language  = {en}
}
@phdthesis{Aido2024,
  author    = {Aido, Ahmed},
  title     = {Development of anti-TNF antibody-gold nanoparticles (anti-TNF-AuNPs)},
  doi       = {10.25972/OPUS-34921},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-349212},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Gold nanoparticles of diameter ca. 60 nm have been synthesized based on Turkevich and Frens protocols. We have demonstrated that the carboxyl-modified gold nanoparticles can be coupled covalently with antibodies (Ab) of interest using the EDC/NHS coupling procedure. Binding studies with Ab-grafted AuNPs and GpL fusion proteins proved that conjugation of AuNPs with antibodies enables immobilization of antibodies with preservation of a significant antigen binding capacity. More importantly, our findings showed that the conjugation of types of anti-TNF receptors antibodies such as anti-Fn14 antibodies (PDL192 and 5B6) (Aido et al., 2021), anti-CD40, anti-4-1BB and anti-TNFR2 with gold nanoparticles confers them with potent agonism. Thus, our results suggest that AuNPs can be utilized as a platform to immobilize anti-TNFR antibodies which, on the one hand, helps to enhance their agonistic activity in comparison to "free" inactive antibodies by mimicking the effect of cell-anchored antibodies or membrane-bound TNF ligands and, on the other hand, allows to develop new generations of drug delivery systems. These constructs are characterized with their biocompatibility and their tunable synthesis process. In a further work part, we combined the benefits of the established system of Ab-AuNPs with materials used widely in the modern biofabrication approaches such as the photo-crosslinked hydrogels, methacrylate-modified gelatin (GelMA), combined with embedded variants of human cell lines. The acquired results demonstrated clearly that the attaching of proteins like antibodies to gold nanoparticles might reduce their release rate from the crosslinked hydrogels upon the very low diffusion of gold nanoparticles from the solid constructs to the surrounding medium yielding long-term local functioning proteins-attached particles. Moreover, our finding suggests that hydrogel-embedded AuNP-immobilized antibodies, e.g. anti-TNFα-AuNPs or anti-IL1-AuNPs enable local inhibitory functions, To sum up, our results demonstrate that AuNPs can act as a platform to attach anti-TNFR antibodies to enhance their agonistic activity by resembling the output of cell-anchoring or membrane bounding. Gold nanoparticles are considered, thus, as promising tool to develop the next generation of drug delivery systems, which may contribute to cancer therapy. On top of that, the embedding of anti-inflammatory-AuNPs in the biofabricated hydrogel presents new innovative strategy of the treatment of autoinflammatory diseases.},
  subject      = {Nanopartikel},
  language  = {en}
}
@phdthesis{Allgaier2024,
  author    = {Allgaier, Johannes},
  title     = {Machine Learning Explainability on Multi-Modal Data using Ecological Momentary Assessments in the Medical Domain},
  doi       = {10.25972/OPUS-35118},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-351189},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Introduction. Mobile health (mHealth) integrates mobile devices into healthcare, enabling remote monitoring, data collection, and personalized interventions. Machine Learning (ML), a subfield of Artificial Intelligence (AI), can use mHealth data to confirm or extend domain knowledge by finding associations within the data, i.e., with the goal of improving healthcare decisions. In this work, two data collection techniques were used for mHealth data fed into ML systems: Mobile Crowdsensing (MCS), which is a collaborative data gathering approach, and Ecological Momentary Assessments (EMA), which capture real-time individual experiences within the individual's common environments using questionnaires and sensors. We collected EMA and MCS data on tinnitus and COVID-19. About 15 \% of the world's population suffers from tinnitus. Materials \& Methods. This thesis investigates the challenges of ML systems when using MCS and EMA data. It asks: How can ML confirm or broad domain knowledge? Domain knowledge refers to expertise and understanding in a specific field, gained through experience and education. Are ML systems always superior to simple heuristics and if yes, how can one reach explainable AI (XAI) in the presence of mHealth data? An XAI method enables a human to understand why a model makes certain predictions. Finally, which guidelines can be beneficial for the use of ML within the mHealth domain? In tinnitus research, ML discerns gender, temperature, and season-related variations among patients. In the realm of COVID-19, we collaboratively designed a COVID-19 check app for public education, incorporating EMA data to offer informative feedback on COVID-19-related matters. This thesis uses seven EMA datasets with more than 250,000 assessments. Our analyses revealed a set of challenges: App user over-representation, time gaps, identity ambiguity, and operating system specific rounding errors, among others. Our systematic review of 450 medical studies assessed prior utilization of XAI methods. Results. ML models predict gender and tinnitus perception, validating gender-linked tinnitus disparities. Using season and temperature to predict tinnitus shows the association of these variables with tinnitus. Multiple assessments of one app user can constitute a group. Neglecting these groups in data sets leads to model overfitting. In select instances, heuristics outperform ML models, highlighting the need for domain expert consultation to unveil hidden groups or find simple heuristics. Conclusion. This thesis suggests guidelines for mHealth related data analyses and improves estimates for ML performance. Close communication with medical domain experts to identify latent user subsets and incremental benefits of ML is essential.},
  subject      = {Maschinelles Lernen},
  language  = {en}
}
@phdthesis{Amini2024,
  author    = {Amini, Emad},
  title     = {How central and peripheral clocks and the neuroendocrine system interact to time eclosion behavior in \(Drosophila\) \(melanogaster\)},
  doi       = {10.25972/OPUS-36130},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-361309},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {To grow larger, insects must shed their old rigid exoskeleton and replace it with a new one. This process is called molting and the motor behavior that sheds the old cuticle is called ecdysis. Holometabolic insects have pupal stages in between their larval and adult forms, during which they perform metamorphosis. The pupal stage ends with eclosion, i.e., the emergence of the adult from the pupal shell. Insects typically eclose at a specific time during the day, likely when abiotic conditions are at their optimum. A newly eclosed insect is fragile and needs time to harden its exoskeleton. Hence, eclosion is regulated by sophisticated developmental and circadian timing mechanisms. In Drosophila melanogaster, eclosion is limited to a daily time window in the morning, regarded as the "eclosion gate". In a population of laboratory flies entrained by light/dark cycles, most of the flies eclose around lights on. This rhythmic eclosion pattern is controlled by the circadian clock and persists even under constant conditions. Developmental timing is under the control of complex hormonal signaling, including the steroid ecdysone, insulin-like peptides, and prothoracicotropic hormone (PTTH). The interactions of the central circadian clock in the brain and a peripheral clock in the prothoracic gland (PG) that produces ecdysone are important for the circadian timing of eclosion. These two clocks are connected by a bilateral pair of peptidergic PTTH neurons (PTTHn) that project to the PG. Before each molt, the ecdysone level rises and then falls shortly before ecdysis. The falling ecdysone level must fall below a certain threshold value for the eclosion gate to open. The activity of PTTHn is inhibited by short neuropeptide F (sNPF) from the small ventrolateral neurons (sLNvs) and inhibition is thought to lead to a decrease in ecdysone production. The general aim of this thesis is to further the understanding of how the circadian clock and neuroendocrinal pathways are coordinated to drive eclosion rhythmicity and to identify when these endocrinal signaling pathways are active. In Chapter I, a series of conditional PTTHn silencing-based behavioral assays, combined with neuronal activity imaging techniques such as non-invasive ARG-Luc show that PTTH signaling is active and required shortly before eclosion and may serve to phase-adjust the activity of the PG at the end of pupal development. Trans-synaptic anatomical stainings identified the sLNvs, dorsal neurons 1 (DN1), dorsal neurons 2 (DN2), and lateral posterior neurons (LPNs) clock neurons as directly upstream of the PTTHn. Eclosion motor behavior is initiated by Ecdysis triggering hormone (ETH) which activates a pair of ventromedial (Vm) neurons to release eclosion hormone (EH) which positively feeds back to the source of ETH, the endocrine Inka cells. In Chapter II trans-synaptic tracing showed that most clock neurons provide input to the Vm and non-canonical EH neurons. Hence, clock can potentially influence the ETH/EH feedback loop. The activity profile of the Inka cells and Vm neurons before eclosion is described. Vm and Inka cells are active around seven hours before eclosion. Interestingly, all EH neurons appear to be exclusively peptidergic. In Chapter III, using chemoconnectomics, PTTHns were found to express receptors for sNPF, allatostatin A (AstA), allatostatin C (AstC), and myosuppressin (Ms), while EH neurons expressed only Ms and AstA receptors. Eclosion assays of flies with impaired AstA, AstC, or Ms signaling do not show arrhythmicity under constant conditions. However, optogenetic activation of the AstA neurons strongly suppresses eclosion. Chapter IV focuses on peripheral ventral' Tracheal dendrite (v'Td) and class IV dendritic arborization (C4da) neurons. The C4da neurons mediate larval light avoidance through endocrine PTTH signaling. The v'Td neurons mainly receive O2/CO2 input from the trachea and are upstream of Vm neurons but are not required for eclosion rhythmicity. Conditional ablation of the C4da neurons or torso (receptor of PTTH) knock-out in the C4da neurons impaired eclosion rhythmicity. Six to seven hours before eclosion, PTTHn, C4da, and Vm neurons are active based on ARG-Luc imaging. Thus, C4da neurons may indirectly connect the PTTHn to the Vm neurons. In summary, this thesis advances our knowledge of the temporal activity and role of PTTH signaling during pupal development and rhythmic eclosion. It further provides a comprehensive characterization of the synaptic and peptidergic inputs from clock neurons to PTTHn and EH neurons. AstA, AstC, and Ms are identified as potential modulators of eclosion circuits and suggest an indirect effect of PTTH signaling on EH signaling via the peripheral sensory C4da neurons.},
  subject      = {Neuroendokrines System},
  language  = {en}
}
@phdthesis{Andelovic2024,
  author    = {Andelovic, Kristina},
  title     = {Characterization of arterial hemodynamics using mouse models of atherosclerosis and tissue-engineered artery models},
  doi       = {10.25972/OPUS-30360},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-303601},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Within this thesis, three main approaches for the assessment and investigation of altered hemodynamics like wall shear stress, oscillatory shear index and the arterial pulse wave velocity in atherosclerosis development and progression were conducted: 1. The establishment of a fast method for the simultaneous assessment of 3D WSS and PWV in the complete murine aortic arch via high-resolution 4D-flow MRI 2. The utilization of serial in vivo measurements in atherosclerotic mouse models using high-resolution 4D-flow MRI, which were divided into studies describing altered hemodynamics in late and early atherosclerosis 3. The development of tissue-engineered artery models for the controllable application and variation of hemodynamic and biologic parameters, divided in native artery models and biofabricated artery models, aiming for the investigation of the relationship between atherogenesis and hemodynamics Chapter 2 describes the establishment of a method for the simultaneous measurement of 3D WSS and PWV in the murine aortic arch at, using ultra high-field MRI at 17.6T [16], based on the previously published method for fast, self-navigated wall shear stress measurements in the murine aortic arch using radial 4D-phase contrast MRI at 17.6 T [4]. This work is based on the collective work of Dr. Patrick Winter, who developed the method and the author of this thesis, Kristina Andelovic, who performed the experiments and statistical analyses. As the method described in this chapter is basis for the following in vivo studies and undividable into the sub-parts of the contributors without losing important information, this chapter was not split into the single parts to provide fundamental information about the measurement and analysis methods and therefore better understandability for the following studies. The main challenge in this chapter was to overcome the issue of the need for a high spatial resolution to determine the velocity gradients at the vascular wall for the WSS quantification and a high temporal resolution for the assessment of the PWV without prolonging the acquisition time due to the need for two separate measurements. Moreover, for a full coverage of the hemodynamics in the murine aortic arch, a 3D measurement is needed, which was achieved by utilization of retrospective navigation and radial trajectories, enabling a highly flexible reconstruction framework to either reconstruct images at lower spatial resolution and higher frame rates for the acquisition of the PWV or higher spatial resolution and lower frame rates for the acquisition of the 3D WSS in a reasonable measurement time of only 35 minutes. This enabled the in vivo assessment of all relevant hemodynamic parameters related to atherosclerosis development and progression in one experimental session. This method was validated in healthy wild type and atherosclerotic Apoe-/- mice, indicating no differences in robustness between pathological and healthy mice. The heterogeneous distribution of plaque development and arterial stiffening in atherosclerosis [10, 12], however, points out the importance of local PWV measurements. Therefore, future studies should focus on the 3D acquisition of the local PWV in the murine aortic arch based on the presented method, in order to enable spatially resolved correlations of local arterial stiffness with other hemodynamic parameters and plaque composition. In Chapter 3, the previously established methods were used for the investigation of changing aortic hemodynamics during ageing and atherosclerosis in healthy wild type and atherosclerotic Apoe-/- mice using the previously established methods [4, 16] based on high-resolution 4D-flow MRI. In this work, serial measurements of healthy and atherosclerotic mice were conducted to track all changes in hemodynamics in the complete aortic arch over time. Moreover, spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated. This important feature allowed for the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and most importantly - at a glance. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe-/- mice, with decreasing longWSS and increasing OSI, while showing constant PWV in healthy mice and increasing longWSS and decreasing OSI, while showing increased PWV in diseased mice. Moreover, spatially resolved correlations between WSS, PWV, plaque and vessel wall characteristics were enabled, giving detailed insights into coherences between hemodynamics and plaque composition. Here, the circWSS was identified as a potential marker of plaque size and composition in advanced atherosclerosis. Moreover, correlations with PWV values identified the maximum radStrain could serve as a potential marker for vascular elasticity. This study demonstrated the feasibility and utility of high-resolution 4D flow MRI to spatially resolve, visualize and analyze statistical differences in all relevant hemodynamic parameters over time and between healthy and diseased mice, which could significantly improve our understanding of plaque progression towards vulnerability. In future studies the relation of vascular elasticity and radial strain should be further investigated and validated with local PWV measurements and CFD. Moreover, the 2D histological datasets were not reflecting the 3D properties and regional characteristics of the atherosclerotic plaques. Therefore, future studies will include 3D plaque volume and composition analysis like morphological measurements with MRI or light-sheet microscopy to further improve the analysis of the relationship between hemodynamics and atherosclerosis. Chapter 4 aimed at the description and investigation of hemodynamics in early stages of atherosclerosis. Moreover, this study included measurements of hemodynamics at baseline levels in healthy WT and atherosclerotic mouse models. Due to the lack of hemodynamic-related studies in Ldlr-/- mice, which are the most used mouse models in atherosclerosis research together with the Apoe-/- mouse model, this model was included in this study to describe changing hemodynamics in the aortic arch at baseline levels and during early atherosclerosis development and progression for the first time. In this study, distinct differences in aortic geometries of these mouse models at baseline levels were described for the first time, which result in significantly different flow- and WSS profiles in the Ldlr-/- mouse model. Further basal characterization of different parameters revealed only characteristic differences in lipid profiles, proving that the geometry is highly influencing the local WSS in these models. Most interestingly, calculation of the atherogenic index of plasma revealed a significantly higher risk in Ldlr-/- mice with ongoing atherosclerosis development, but significantly greater plaque areas in the aortic arch of Apoe-/- mice. Due to the given basal WSS and OSI profile in these two mouse models - two parameters highly influencing plaque development and progression - there is evidence that the regional plaque development differs between these mouse models during very early atherogenesis. Therefore, future studies should focus on the spatiotemporal evaluation of plaque development and composition in the three defined aortic regions using morphological measurements with MRI or 3D histological analyses like LSFM. Moreover, this study offers an excellent basis for future studies incorporating CFD simulations, analyzing the different measured parameter combinations (e.g., aortic geometry of the Ldlr-/- mouse with the lipid profile of the Apoe-/- mouse), simulating the resulting plaque development and composition. This could help to understand the complex interplay between altered hemodynamics, serum lipids and atherosclerosis and significantly improve our basic understanding of key factors initiating atherosclerosis development. Chapter 5 describes the establishment of a tissue-engineered artery model, which is based on native, decellularized porcine carotid artery scaffolds, cultured in a MRI-suitable bioreactor-system [23] for the investigation of hemodynamic-related atherosclerosis development in a controllable manner, using the previously established methods for WSS and PWV assessment [4, 16]. This in vitro artery model aimed for the reduction of animal experiments, while simultaneously offering a simplified, but completely controllable physical and biological environment. For this, a very fast and gentle decellularization protocol was established in a first step, which resulted in porcine carotid artery scaffolds showing complete acellularity while maintaining the extracellular matrix composition, overall ultrastructure and mechanical strength of native arteries. Moreover, a good cellular adhesion and proliferation was achieved, which was evaluated with isolated human blood outgrowth endothelial cells. Most importantly, an MRI-suitable artery chamber was designed for the simultaneous cultivation and assessment of high-resolution 4D hemodynamics in the described artery models. Using high-resolution 4D-flow MRI, the bioreactor system was proven to be suitable to quantify the volume flow, the two components of the WSS and the radStrain as well as the PWV in artery models, with obtained values being comparable to values found in literature for in vivo measurements. Moreover, the identification of first atherosclerotic processes like intimal thickening is achievable by three-dimensional assessment of the vessel wall morphology in the in vitro models. However, one limitation is the lack of a medial smooth muscle cell layer due to the dense ECM. Here, the utilization of the laser-cutting technology for the generation of holes and / or pits on a microscale, eventually enabling seeding of the media with SMCs showed promising results in a first try and should be further investigated in future studies. Therefore, the proposed artery model possesses all relevant components for the extension to an atherosclerosis model which may pave the way towards a significant improvement of our understanding of the key mechanisms in atherogenesis. Chapter 6 describes the development of an easy-to-prepare, low cost and fully customizable artery model based on biomaterials. Here, thermoresponsive sacrificial scaffolds, processed with the technique of MEW were used for the creation of variable, biomimetic shapes to mimic the geometric properties of the aortic arch, consisting of both, bifurcations and curvatures. After embedding the sacrificial scaffold into a gelatin-hydrogel containing SMCs, it was crosslinked with bacterial transglutaminase before dissolution and flushing of the sacrificial scaffold. The hereby generated channel was subsequently seeded with ECs, resulting in an easy-to-prepare, fast and low-cost artery model. In contrast to the native artery model, this model is therefore more variable in size and shape and offers the possibility to include smooth muscle cells from the beginning. Moreover, a custom-built and highly adaptable perfusion chamber was designed specifically for the scaffold structure, which enabled a one-step creation and simultaneously offering the possibility for dynamic cultivation of the artery models, making it an excellent basis for the development of in vitro disease test systems for e.g., flow-related atherosclerosis research. Due to time constraints, the extension to an atherosclerosis model could not be achieved within the scope of this thesis. Therefore, future studies will focus on the development and validation of an in vitro atherosclerosis model based on the proposed bi- and three-layered artery models. In conclusion, this thesis paved the way for a fast acquisition and detailed analyses of changing hemodynamics during atherosclerosis development and progression, including spatially resolved analyses of all relevant hemodynamic parameters over time and in between different groups. Moreover, to reduce animal experiments, while gaining control over various parameters influencing atherosclerosis development, promising artery models were established, which have the potential to serve as a new platform for basic atherosclerosis research.},
  subject      = {H{\"a}modynamik},
  language  = {en}
}
@phdthesis{Aroko2024,
  author    = {Aroko, Erick Onyango},
  title     = {Trans-regulation of \(Trypanosoma\) \(brucei\) variant surface glycoprotein (VSG) mRNA and structural analysis of a \(Trypanosoma\) \(vivax\) VSG using X-ray crystallography},
  doi       = {10.25972/OPUS-24177},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-241773},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {African trypanosomes are unicellular parasites that cause nagana and sleeping sickness in livestock and man, respectively. The major pathogens for the animal disease include Trypanosoma vivax, T. congolense, and T. brucei brucei, whereas T. b. gambiense and T. b. rhodesiense are responsible for human infections. Given that the bloodstream form (BSF) of African trypanosomes is exclusively extracellular, its cell surface forms a critical boundary with the host environment. The cell surface of the BSF African trypanosomes is covered by a dense coat of immunogenic variant surface glycoproteins (VSGs). This surface protein acts as an impenetrable shield that protects the cells from host immune factors and is also involved in antibody clearance and antigenic variation, which collectively ensure that the parasite stays ahead of the host immune system. Gene expression in T. brucei is markedly different from other eukaryotes: most genes are transcribed as long polycistronic units, processed by trans-splicing a 39-nucleotide mini exon at the 5′ and polyadenylation at the 3′ ends of individual genes to generate the mature mRNA. Therefore, gene expression in T. brucei is regulated post-transcriptionally, mainly by the action of RNA binding proteins (RBPs) and conserved elements in the 3′ untranslated regions (UTR) of transcripts. The expression of VSGs is highly regulated, and only a single VSG gene is expressed at a time from one of the ~15 subtelomeric domains termed bloodstream expression sites (BES). When cells are engineered to simultaneously express two VSGs, the total VSG mRNA do not exceed the wild type amounts. This suggests that a robust VSG mRNA balancing mechanism exists in T. brucei. The present study uses inducible and constitutive expression of ectopic VSG genes to show that the endogenous VSG mRNA is regulated only if the second VSG is properly targeted to the ER. Additionally, the endogenous VSG mRNA response is triggered when high amounts of the GFP reporter with a VSG 3′UTR is targeted to the ER. Further evidence that non-VSG ER import signals can efficiently target VSGs to the ER is presented. This study suggests that a robust trans-regulation of the VSG mRNA is elicited at the ER through a feedback loop to keep the VSG transcripts in check and avoid overshooting the secretory pathway capacity. Further, it was shown that induction of expression of the T. vivax VSG ILDat1.2 in T. brucei causes a dual cell cycle arrest, with concomitant upregulation of the protein associated with differentiation (PAD1) expression. It could be shown that T. vivax VSG ILDat1.2 can only be sufficiently expressed in T. brucei after replacing its native GPI signal peptide with that of a T. brucei VSG. Taken together, these data indicate that inefficient VSG GPI anchoring and expression of low levels of the VSG protein can trigger differentiation from slender BSF to stumpy forms. However, a second T. vivax VSG, ILDat2.1, is not expressed in T. brucei even after similar modifications to its GPI signals. An X-ray crystallography approach was utilized to solve the N-terminal domain (NTD) structure of VSG ILDat1.2. This is first structure of a non-T. brucei VSG, and the first of a surface protein of T. vivax to be solved. VSG ILDat1.2 NTD maintains the three-helical bundle scaffold conserved in T. brucei surface proteins. However, it is likely that there are variations in the architecture of the membrane proximal region of the ILDat1.2 NTD and its CTD from T. brucei VSGs. The tractable T. brucei system is presented as a model that can be used to study surface proteins of related trypanosome species, thus creating avenues for further characterization of trypanosome surface coats.},
  subject      = {Trypanosoma vivax},
  language  = {en}
}
@phdthesis{BakariSoale2024,
  author    = {Bakari Soale, Majeed},
  title     = {Regulation of the Variant Surface Glycoprotein (VSG) Expression and Characterisation of the Nucleolar DExD/H box Protein Hel66 in \(Trypanosoma\) \(brucei\)},
  doi       = {10.25972/OPUS-25809},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-258090},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {The variant surface glycoprotein (VSG) of African trypanosomes plays an essential role in protecting the parasites from host immune factors. These trypanosomes undergo antigenic variation resulting in the expression of a single VSG isoform out of a repertoire of around 2000 genes. The molecular mechanism central to the expression and regulation of the VSG is however not fully understood. Gene expression in trypanosomes is unusual due to the absence of typical RNA polymerase II promoters and the polycistronic transcription of genes. The regulation of gene expression is therefore mainly post-transcriptional. Regulatory sequences, mostly present in the 3´ UTRs, often serve as key elements in the modulation of the levels of individual mRNAs. In T. brucei VSG genes, a 100 \% conserved 16mer motif within the 3´ UTR has been shown to modulate the stability of VSG transcripts and hence their expression. As a stability-associated sequence element, the absence of nucleotide substitutions in the motif is however unusual. It was therefore hypothesised that the motif is involved in other essential roles/processes besides stability of the VSG transcripts. In this study, it was demonstrated that the 100 \% conservation of the 16mer motif is not essential for cell viability or for the maintenance of functional VSG protein levels. It was further shown that the intact motif in the active VSG 3´ UTR is neither required to promote VSG silencing during switching nor is it needed during differentiation from bloodstream forms to procyclic forms. Crosstalk between the VSG and procyclin genes during differentiation to the insect vector stage is also unaffected in cells with a mutated 16mer motif. Ectopic overexpression of a second VSG however requires the intact motif to trigger silencing and exchange of the active VSG, suggesting a role for the motif in transcriptional VSG switching. The 16mer motif therefore plays a dual role in VSG in situ switching and stability of VSG transcripts. The additional role of the 16mer in the essential process of antigenic variation appears to be the driving force for the 100 \% conservation of this RNA motif. A screen aimed at identifying candidate RNA-binding proteins interacting with the 16mer motif, led to the identification of a DExD/H box protein, Hel66. Although the protein did not appear to have a direct link to the 16mer regulation of VSG expression, the DExD/H family of proteins are important players in the process of ribosome biogenesis. This process is relatively understudied in trypanosomes and so this candidate was singled out for detailed characterisation, given that the 16mer story had reached a natural end point. Ribosome biogenesis is a major cellular process in eukaryotes involving ribosomal RNA, ribosomal proteins and several non-ribosomal trans-acting protein factors. The DExD/H box proteins are the most important trans-acting protein factors involved in the biosynthesis of ribosomes. Several DExD/H box proteins have been directly implicated in this process in yeast. In trypanosomes, very few of this family of proteins have been characterised and therefore little is known about the specific roles they play in RNA metabolism. Here, it was shown that Hel66 is involved in rRNA processing during ribosome biogenesis. Hel66 localises to the nucleolus and depleting the protein led to a severe growth defect. Loss of the protein also resulted in a reduced rate of global translation and accumulation of rRNA processing intermediates of both the small and large ribosomal subunits. Hel66 is therefore an essential nucleolar DExD/H protein involved in rRNA processing during ribosome biogenesis. As very few protein factors involved in the processing of rRNAs have been described in trypanosomes, this finding represents an important platform for future investigation of this topic.},
  subject      = {Trypanosoma brucei},
  language  = {en}
}
@phdthesis{Bakirci2024,
  author    = {Bakirci, Ezgi},
  title     = {Development of \(In\) \(vitro\) Models for Tissue Engineering Applications Using a High-Resolution 3D Printing Technology},
  doi       = {10.25972/OPUS-25164},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251645},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {In vitro models mimic the tissue-specific anatomy and play essential roles in personalized medicine and disease treatments. As a sophisticated manufacturing technology, 3D printing overcomes the limitations of traditional technologies and provides an excellent potential for developing in vitro models to mimic native tissue. This thesis aims to investigate the potential of a high-resolution 3D printing technology, melt electrowriting (MEW), for fabricating in vitro models. MEW has a distinct capacity for depositing micron size fibers with a defined design. In this thesis, three approaches were used, including 1) extending the MEW polymer library for different biomedical applications, 2) developing in vitro models for evaluation of cell growth and migration toward the different matrices, and 3) studying the effect of scaffold designs and biochemical cues of microenvironments on cells. First, we introduce the MEW processability of (AB)n and (ABAC)n segmented copolymers, which have thermally reversible network formulation based on physical crosslinks. Bisurea segments are combined with hydrophobic poly(dimethylsiloxane) (PDMS) or hydrophilic poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) segments to form the (AB)n segmented copolymers. (ABAC)n segmented copolymers contain all three segments: in addition to bisurea, both hydrophobic and hydrophilic segments are available in the same polymer chain, resulting in tunable mechanical and biological behaviors. MEW copolymers either support cells attachment or dissolve without cytotoxic side effects when in contact with the polymers at lower concentrations, indicating that this copolymer class has potential in biological applications. The unique biological and surface properties, transparency, adjustable hydrophilicity of these copolymers could be beneficial in several in vitro models. The second manuscript addresses the design and development of a melt electrowritten competitive 3D radial migration device. The approach differs from most of the previous literature, as MEW is not used here to produce cell invasive scaffolds but to fabricate an in vitro device. The device is utilized to systematically determine the matrix which promotes cell migration and growth of glioblastoma cells. The glioblastoma cell migration is tested on four different Matrigel concentrations using a melt electrowritten radial device. The glioblastoma U87 cell growth and migration increase at Matrigel concentrations 6 and 8 mg mL-1 In the development of this radial device, the accuracy, and precision of melt electrowritten circular shapes were investigated. The results show that the printing speed and design diameter are essential parameters for the accuracy of printed constructs. It is the first instance where MEW is used for the production of in vitro devices. The influence of biochemical cues and scaffold designs on astrocytes and glioblastoma is investigated in the last manuscript. A fiber comprising the box and triangle-shaped pores within MEW scaffolds are modified with biochemical cues, including RGD and IKVAV peptides using a reactive NCO-sP(EO-stat-PO) macromer. The results show that astrocytes and glioblastoma cells exhibit different phenotypes on scaffold designs and peptide-coated scaffolds.},
  subject      = {3D-Druck},
  language  = {en}
}