@phdthesis{Triyasmono2024,
  author    = {Triyasmono, Liling},
  title     = {Development and Application of Quantitative \(^1\)H NMR Spectroscopy and Chemometrics for Quality Determination of Red Fruit (\(Pandanus\) \(conoideus\), Lam.) Oil},
  doi       = {10.25972/OPUS-30272},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-302726},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {In this thesis, a new approach of a qNMR method has been investigated to demonstrate the reliability and importance of this method as an alternative solution for analyzing oil quality parameters, especially in RFO, which has particular characteristics (red color). This study also includes the chemometric evaluation of spectral data for authentication, visual grouping, and prediction of RFO quality based on the degree of unsaturation, FFA value, and unsaturated fatty acid content. The analytical measurement procedure of NMR spectroscopy begins with optimization of the analytical acquisition parameters, including effect of solvent, effect of sample concentration, selection of appropriate internal standards, determination of T1, and method validation. Furthermore, the results of the method development were interpreted to RFO samples evaluation, which began with determining the assignment of signal spectra for the determination of AV, SV, EV, and IV simultaneously with: the hydrolysis approach and standard addition of palmitic acid.},
  subject      = {NMR-Spektroskopie},
  language  = {en}
}
@phdthesis{Schlauersbach2023,
  author    = {Schlauersbach, Jonas},
  title     = {The bile-drug-excipient interplay},
  doi       = {10.25972/OPUS-29653},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-296537},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {The bile system in vertebrates is an evolutionary conserved endogenous solubilization system for hydrophobic fats and poorly water-soluble vitamins. Bile pours out from the gallbladder through the common bile duct into the duodenum triggered by cholecystokinin. Cholecystokinin is released from enteroendocrine cells after food intake. The small intestine is also the absorption site of many orally administered drugs. Most emerging drug candidates belong to the class of poorly water-soluble drugs (PWSDs). Like hydrophobic vitamins, these PWSDs might as well be solubilized by bile. Therefore, this natural system is of high interest for drug formulation strategies. Simulated intestinal fluids containing bile salts (e.g., taurocholate TC) and phospholipids (e.g., lecithin L) have been widely applied over the last decade to approximate the behavior of PWSDs in the intestine. Solubilization by bile can enhance the oral absorption of PWSDs being at least in part responsible for the positive "food effect". The dissolution rate of PWSDs can be also enhanced by the presence of bile. Furthermore, some PWSDs profit from supersaturation stabilization by bile salts. Some excipients solubilizing PWSDs seemed to be promising candidates for drug formulation when investigated in vitro without bile. When tested in vivo, these excipients reduced the bioavailability of drugs. However, these observations have been hardly examined on a molecular level and general links between bile interaction in vitro and bioavailability are still missing. This thesis investigated the interplay of bile, PWSDs, and excipients on a molecular level, providing formulation scientists a blueprint for rational formulation design taking bile/PWSD/excipient/ interaction into account. The first chapter focus on an in silico 1H nuclear magnetic resonance (NMR) spectroscopy-based algorithm for bile/drug interaction prediction. Chapter II to IV report the impact of excipients on bioavailability of PWSDs interacting with bile. At last, we summarized helpful in vitro methods for drug formulation excipient choice harnessing biopharmaceutic solubilization in chapter V. Chapter I applies 1H NMR studies with bile and drugs on a large scale for quantitative structure-property relationship analysis. 141 drugs were tested in simulated intestinal media by 1H NMR. Drug aryl-proton signal shifts were correlated to in silico calculated molecular 2D descriptors. The probability of a drug interacting with bile was dependent on its polarizability and lipophilicity, whereas interaction with lipids in simulated intestinal media components was dependent on molecular symmetry, lipophilicity, hydrogen bond acceptor capability, and aromaticity. The probability of a drug to interact with bile was predictive for a positive food effect. This algorithm might help in the future to identify a bile and lipid interacting drug a priori. Chapter II investigates the impact of excipients on bile and free drug fraction. Three different interaction patterns for excipients were observed. The first pattern defined excipients that interacted with bile and irreversibly bound bile. Therefore, the free drug fraction of bile interacting drugs increased. The second pattern categorized excipients that formed new colloidal entities with bile which had a high affinity to bile interacting drugs. These colloids trapped the drug and decreased the free drug fraction. The last excipient pattern described excipients that formed supramolecular structures in coexistence with bile and had no impact on the free drug fraction. These effects were only observed for drugs interacting with bile (Perphenazine and Imatinib). Metoprolol's free drug fraction, a compound not interacting with bile, was unaffected by bile or bile/excipient interaction. We hypothesized that bile/excipient interactions may reduce the bioavailability of bile interacting drugs. Chapter III addresses the hypothesis from chapter II. A pharmacokinetic study in rats revealed that the absorption of Perphenazine was reduced by bile interacting excipients due to bile/excipient interaction. The simultaneous administration of excipient patterns I and II did not further reduce or enhance Perphenazine absorption. Conversely, the absorption of Metoprolol was not impacted by excipients. This reinforced the hypothesis, that drugs interacting with bile should not be formulated with excipients also interacting with bile. Chapter IV further elaborates which in vitro methods using simulated intestinal fluids are predictive for a drug's pharmacokinetic profile. The PWSD Naporafenib was analyzed in vitro with simulated intestinal fluids and in presence of excipients regarding solubility, supersaturation, and free drug fraction. Naporafenib showed a strong interaction with TC/L from simulated bile. Assays with TC/L, but not without identified one excipient as possibly bioavailability reducing, one as supersaturation destabilizing, and the last as bile not interacting and supersaturation stabilizing excipient. A pharmacokinetic study in beagle dogs outlined and confirmed the in vitro predictions. The Appendix summarizes in vivo predictive methods as presented in chapter I to IV and rationalizes experimental design paving the way towards a biopharmaceutic excipient screening. The first presented preliminary decision tree is transformed into a step-by-step instruction. The presented decision matrix might serve as a blueprint for processes in early phase drug formulation development. In summary, this thesis describes how a drug can be defined as bile interacting or non-interacting and gives a guide as well how to rate the impact of excipients on bile. We showed in two in vivo studies that bile/excipient interaction reduced the bioavailability of bile interacting drugs, while bile non-interacting drugs were not affected. We pointed out that the bile solubilization system must be incorporated during drug formulation design. Simulated gastrointestinal fluids offer a well-established platform studying the fate of drugs and excipients in vivo. Therefore, rational implementation of biopharmaceutic drug and excipient screening steers towards efficacy of oral PWSD formulation design.},
  subject      = {Solubilisation},
  language  = {en}
}
@phdthesis{Nagl2022,
  author    = {Nagl, Patrick Alexander},
  title     = {Chemistry meets Cancer Immunotherapy: Synthesis and Characterization of Hapten-like Compounds for Selective Immunotherapy},
  doi       = {10.25972/OPUS-21138},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-211385},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Chimeric antigen receptors (CARs) are able to specifically direct T cells to tumor antigens and therapy with anti-CD19 CARs has already cured cancer patients with B-cell lymphomas who have undergone long-term therapy non-successful. Despite this impressive result, the therapy is currently only approved as a last treatment option for blood cancers due to its life-threatening deficiencies. For patient safety and to enable additional application such as the treatment of solid tumors, CAR-T cells must be controllable, e. g. by chemically programmable CARs (cpCARs) regulated by hapten-like compounds. This thesis reports the synthesis and characterization of such hapten-like compounds. In the first step, seven different warheads with two different spacers were bound to biotin in order to find a suitable warhead for programming the cpCAR. In a second step, synthetic routes for the three pharmacophores folate, c(RGD), and an RGD peptidomimetic were developed. The routes allow the modification of the pharmacophores with one of the warheads from the first step. CuAAC was chosen as a bioorthogonal approach to link pharmacophores and warheads. In total, three different pharmacophores were modified with the 1,3-diketone motif of compound 21 leading to 112, 113 and 128. Activation of the T-cell signaling cascade was tested after binding of these hapten-like compounds to the cpCAR in the presence of suitable target structures. For 112, only a slight, non-significant, activation of the T-cell signaling cascade was observed, whereas for 113 and 128, a significant activation of the T-cell signaling cascade was observed. The poor solubility of the folate compounds led to alternative strategies. Folic acid was exchanged by pteroic acid and the bifunctional, linear compounds were enlarged to trifunctional dendrimers. Besides the reported regioisomer in 112, a second one, which was not reported to date, occurred by the cyclization of the linear RGD pentapeptide leading to 113. After the reported synthesis of an RGD peptidomimetic analogous to 128 could not be reproduced, a new synthetic route was developed. It also consists of 17 steps, but reduces the number of linear steps from 13 to 10. Moreover, the developed route contains an asymmetric hydrogenation step and is, compared to the published one, more flexible by the use of the copper-catalyzed azide-alkyne cycloaddition (CuAAC). In addition, an unknown reaction was observed. Instead of the formation of a Schiff base in the reductive amination of 129, an insertion of propargylamine occurred forming 131. The reaction is almost quantitative and in high purity. After requiring no purification, it could be predestined for industrial purposes, such as the synthesis of N-functionalized 1,2-dihydroquinolines or as a building block with various orthogonal functional groups. Besides the sulfonamide 16, the diketone (21, 27, 31) and lactam compounds (39 - 41), experiments on adapter molecules with further warheads were performed. In the synthesis of a proadapter approach, in which the warhead is formed only after the retro-aldol reaction catalyzed by the mAb, 6 of 10 steps were successfully performed. A newly developed synthesis to keto-sulfonyl and keto-sulfoxide compounds could not be completed but was performed on a small scale to the point of keto-sulfonyl and keto-sulfoxide. Furthermore, a universal synthesis route was designed to allow the introduction of the warhead at the end of the synthesis by acylation. Thus, after 5 shared steps, 3 of them in quantitative yield, different warheads may be introduced. Moreover, this also facilitates the purification and the analysis of the compounds by the absence of tautomerism or labile groups. However, the acylation experiments were not successful with either the acid cyanide or the Weinreb amide. In summary, this thesis has proven that the 1,3-diketone motif is a suitable warhead for programming the cpCAR, which was developed by Hudecek et al. (unpublished data). The hapten-like compounds 112, 113 and 128 simultaneously bind to integrin \${\alpha}_v{\beta}_3\$ and the cpCAR activating the T-cell signaling cascade. The modular synthesis strategy and the use of the bioorthogonal CuAAC allow straightforward access to these valuable immunotherapeutics but revealed the need for an additional purification step to remove copper ions.},
  subject      = {Organische Synthese},
  language  = {en}
}
@phdthesis{Becht2022,
  author    = {Becht, Alexander Ulrich},
  title     = {New applications for spectroscopic and chemometric studies of drugs},
  doi       = {10.25972/OPUS-27534},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-275342},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Spectroscopic methods were established decades ago in a wide variety of fields. This also applies to the pharmaceutical field, although they initially were mostly used for identity testing or structure elucidation only. Technical developments, such as miniaturization (NMR benchtop devices), Fourier transformations (for NMR, MIR spectroscopy) or the combination with chemometric evaluation (e.g., in Process Analytical Technology, PAT), have further increased their importance and opened up new applications. The aim of this work was to investigate further new approaches and to find new applications for already established methods and to show their benefits. By means of MIR, NIR and NMR data and their chemometric evaluation (principal component analysis, PCA; hierarchical cluster analysis, HCA; linear discriminant analysis, LDA), possibilities were presented to successfully determine the manufacturer or the pharmaceutical company of various paracetamol preparations. In the course of this, various similarities and correlations between the preparations of individual companies could also be identified. For this purpose, a suitable sample preparation was developed for each spectroscopic method, and suitable measurement parameters in order to obtain reproducible spectra for the chemometric evaluation were determined. Furthermore, the results of the two unsupervised methods (HCA, PCA) were compared with each other. The HCA was able to confirm those of the PCA for the very most part. Additionally, through these methods it was possible to characterize many of the preparations based on clusters formed by comparable tablet compositions. In order to be able to measure unmortared, whole tablets using the NIR spectrometer, an attachment was developed and manufactured using 3D printing. Its functionality was demonstrated by measuring and analyzing the tablets of two different batches of nine paracetamol preparations. The batches were clearly distinguished on the basis of a PCA and a significant difference was also demonstrated by means of statistical tests. For NMR spectroscopy, a method was developed to obtain optimized "fingerprint" spectra of drug formulations. For this purpose, a 1D DOSY measurement was elaborated, in which the signals of the active ingredient could be filtered out by the appropriate choice of measurement parameters. The chemometric evaluation can thus focus on the remaining signals of the excipients, on the basis of which the preparations of the same API can be distinguished. Especially in the case of formulations that consist largely of active ingredient, data pre processing of the spectra can thus be simplified and greater importance can be assigned to the originally very small excipient signals. A quantitative 1H NMR method was developed for the comparison of a high field spectrometer (400 MHz) with a benchtop spectrometer (80 MHz) for two finished drugs. It was shown that it is possible to obtain comparable results with both instruments, but that the influence of the excipients on the signals and the lower resolution of the benchtop instrument must be taken into account. Therefore, it was not possible to obtain comparable results without further optimization of the method for one of the active ingredients. In the investigation of various reactions between APIs and excipients using DOSY, its usefulness as a screening method in stability testing was demonstrated. For this purpose, three different APIs and excipients were stressed together and the reaction mixtures were subsequently measured using DOSY. Based on the translational diffusion coefficient, the reaction products could be identified and distinguished from the active ingredients and the excipients used. The importance of thoughtful processing could also be demonstrated. If all peak heights are selected when evaluating signals split by direct spin spin coupling, this allows the detection of hidden signals as long as not all signals have the same diffusion coefficient. The selective selection of individual peak heights in the case of split signals also enables the evaluation of signals that overlap slightly. However, the limitations of this method were also shown when two signals overlap too much and differ too little in their diffusion coefficients. Hence, it has been successfully demonstrated in the various projects that the new chemometric approaches, as well as the new applications of already established methods, enable in depth findings and thus have a clear added value.},
  subject      = {Instrumentelle Analytik},
  language  = {en}
}
@phdthesis{Gruene2022,
  author    = {Gr{\"u}ne, Marvin},
  title     = {Solid-state NMR Spectroscopic, X-Ray Diffraction and Quantum Chemical Investigations of the Crystalline Cancer Drug Paclitaxel and Paclitaxel incorporated into Polymer Micelles},
  doi       = {10.25972/OPUS-23719},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-237199},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Paclitaxel (PTX) is one of the leading drugs against breast and ovarian cancer. Due to its low solubility, treatment of the patients with this drug requires a very well-suited combination with a soluble pharmaceutical excipient to increase the bioavailability and reduce the strong side ef-fects. One efficient way to achieve this in the future could be the incorporation of PTX into pol-ymeric micelles composed of poly(2-oxazoline) based triblock copolymers (POL) which ena-bles PTX loadings of up to 50 wt.\%. However, structural information at an atomic level and thus the knowledge of interaction sites within these promising but complex PTX-POL formula-tions were not yet available. Such results could support the future development of improved excipients for PTX and suitable excipients for other pharmaceutical drugs. Therefore, a solid-state MAS NMR investigation of these amorphous formulations with different POL-PTX com-positions was performed in this thesis as this gives insights of the local structure at an atomic level in its solid state. NMR in solution showed very broad 13C signals of PTX for this system due to the reduced mobility of the incorporated drug which exclude this as an analytical meth-od. In a first study, crystalline PTX was structurally characterized by solid-state NMR as no com-plete 13C spectrum assignment and no 1H NMR data existed for the solid state. In addition, the asymmetric unit of the PTX crystal structure consists of two molecules (Z'=2) that can only be investigated in its solid state. As crystalline PTX in total has about 100 different 13C and 1H chemical shifts with very small differences due to Z'=2, and furthermore, its unit cell consisting of more than 900 atoms, accompanying GIPAW (CASTEP) calculations were required for NMR signal assignments. These calculations were performed using the first three available purely hydrous and anhydrous PTX structures, which were determined by XRD and published by Vel-la-Zarb et al. in 2013. Within this thesis, is was discovered that two investigated batches of commercially available PTX from the same supplier both contained an identical and so far un-known PTX phase that was elucidated by PXRD as well as solid-state NMR data. One of the two batches consists of an additional phase that was shown to be very similar to a known hy-drated phase published in 2013.[1] By heating the batch with the mixture of the two phases un-der vacuum, it is transformed completely to the new dry phase occurring in both PTX batches. Since the drying conditions to obtain anhydrous PTX in-situ on the PXRD setup described by Vella-Zarb et. al.[1] were much softer than ours, we identify our dry phase as a relaxed version of their published anhydrate structure. The PXRD data of the new anhydrate phase was trans-ferred into a new structural model, which currently undergoes geometry optimization. Based on solid-state NMR data at MAS spinning frequencies up to 100 kHz, a 13C and a partial 1H signal assignment for the new anhydrous structure were achieved. These results provided sufficient structural information for further investigations of the micellar POL-PTX system. In a second study, the applicability and benefit of two-dimensional solid-state 14N-1H HMQC MAS NMR spectra for the characterization of amorphous POL-PTX formulations was investi-gated. The mentioned technique has never been applied to a system of similar complexity be-fore and was chosen because around 84\% of the small-molecule drugs contain at least one nitrogen atom. In addition, the number of nitrogen atoms in both POL and PTX is much smaller than the number of carbons or hydrogens, which significantly reduces the spectral complexity. 14N has a natural abundance of 99.6\% but leads to quadrupolar broadening due to its nuclear spin quantum number I = 1. While this is usually undesirable due to broadening in the resulting 1D 14N NMR spectra, this effect is explicitly used in the 2D 14N-1H HMQC MAS experiment. The indirect 14N measurement can avoid the broadening while maintaining the advantage of the high natural abundance and making use of the much more dispersed signals due to the additional quadrupolar shifts as compared to 15N. This measurement method could be successfully applied to the complex amorphous POL-PTX mixtures. With increasing PTX loading of the formulations, additional peaks arise as spatial proximities of the amide nitrogens of POL to NH or OH groups of PTX. In addition, the 14N quadrupolar shift of these amide nitrogens decreases with increasing PTX content indicating a more symmetric nitrogen environment. The latter can be explained by a transformation of the trigonal planar coordination of the tertiary amide nitrogen atoms in pure POL towards a more tetrahedral environment upon PTX loading induced by the formation of hydrogen bonds with NH/OH groups of PTX. In the third and last project, the results of the two abovementioned studies were used and ex-tended by solid state 13C and two-dimensional 1H-13C as well as 1H-1H MAS NMR data with the aim to derive a structural model of the POL-PTX formulations at an atomic level. The knowledge of the NMR signal assignments for crystalline PTX was transferred to amorphous PTX (present in the micelles of the formulations). The 13C solid-state NMR signals were evalu-ated concerning changes in chemical shifts and full widths of half maximum (FWHM) for the different PTX loadings. In this way, the required information about possible interaction sites at an atomic level becomes available. Due to the complexity of these systems, such proximities often cannot be assigned to special atoms, but more to groups of atoms, as the individual de-velopments of line widths and line shifts are mutually dependent. An advantageous aspect for this analysis was that pure POL already forms unloaded micelles. The evaluation of the data showed that the terminal phenyl groups of PTX seem to be most involved in the interaction by the establishment of the micelle for lowest drug loading and that they are likely to react to the change in the amount of PTX molecules as well. For the incorporation of PTX in the micelles, the following model could be obtained: For lowest drug loading, PTX is mainly located in the inner part of the micelles. Upon further increasing of the loading, it progressively extends to-ward the micellar shell. This could be well shown by the increasing interactions of the hydro-phobic butyl chain of POL and PTX, proceeding in the direction of the polymer backbone with rising drug load. Furthermore, due to the size of PTX and the hydrodynamic radius of the mi-celles, even at the lowest loading, the PTX molecules partially reach the core-shell interface of the micelle. Upon increasing the drug loading, the surface coverage with PTX clusters increas-es based on the obtained model approach. The latter result is supported by DLS and SANS data of this system. The abovementioned results of the 14N-1H HMQC MAS investigation of the POL-PTX formulations support the outlined model. As an outlook, the currently running geometry optimization and subsequently scheduled calcu-lation of the chemical shieldings of the newly obtained anhydrous PTX crystal structure can further improve the solid-state NMR characterization through determination of further spatial proximities among protons using the existing 2D 1H(DQ)-1H(SQ) solid-state MAS NMR spec-trum at 100 kHz rotor spinning frequency. The 2D 14N-1H HMQC MAS NMR experiments were shown to have great potential as a technique for the analysis of other disordered and amor-phous drug delivery systems as well. The results of this thesis should be subsequently applied to other micellar systems with varying pharmaceutical excipients or active ingredients with the goal of systematically achieving higher drug loadings (e.g., for the investigated PTX, the similar drug docetaxel or even different natural products). Additionally, it is planned to transfer the knowledge to another complex polymer system containing poly(amino acids) which offers hy-drogen bonding donor sites for additional intermolecular interactions. Currently, the POL-PTX system is investigated by further SANS studies that may provide another puzzle piece to the model as complementary measurement method in the future. In addition, the use of MD simu-lations might be considered in the future. This would allow a computerized linking of the differ-ent pieces of information with the aim to determine the most likely model.},
  subject      = {Wirkstoff-Tr{\"a}ger-System},
  language  = {en}
}
@phdthesis{Urlaub2021,
  author    = {Urlaub, Jonas},
  title     = {Development of analytical methods for the quality assessment of mineral oil based excipients and mechanochemically stressed active pharmaceutical ingredients},
  doi       = {10.25972/OPUS-24346},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-243465},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {For the quality assurance of substances for pharmaceutical use, a variety of analytical techniques are available to address specific analytical problems. In this field of application, liquid chromatography (LC) stands out as the gold standard in the pharmaceutical industry. Various detectors can be employed, which are e.g. based on UV/Vis spectroscopy for the examination of molecules with a chromophore, or mass spectrometry (MS) for structural elucidation of analytes. For the separation of enantiomers, the use of capillary electrophoresis (CE) may be more favorable due to the high separation efficiency and easy-to-use and comparatively inexpensive chiral selectors, in contrast to chiral columns for LC, which are usually very expensive and limited to a restricted number of analytes. For structure elucidation in impurity profiling, one- and multidimensional 1H NMR spectroscopy is a valuable tool as long as the analyte molecule has got nuclei that can be detected, which applies for the magnitude of organic pharmaceutical substances. For the evaluation of the amount of mineral oil aromatic hydrocarbons (MOAH) in various paraffin samples from different suppliers, a straightforward method based on 1H NMR spectroscopy was elaborated. The MOAH/MOSH ratio was used to indicate the amount of MOAH of paraffins and to evaluate the extent of refining. In addition, a representative paraffin sample was measured without sample solvent at high temperatures (about 340 K) to avoid the interfering residual solvent signals in the spectral regions of interest. The results of both methods were in good accordance. Moreover, the 1H NMR results were complemented with the UV measurements from the purity testing of paraffins according to the DAB 8. Correlations of the NMR and UV spectroscopic data indicated a linear relationship of both methods for the determination of MOAH in paraffins. Finally, the 1H NMR data was evaluated by principal component analysis (PCA) to explore differences within the paraffin samples and the spectral regions in the 1H NMR spectrum which are responsible for the formation of groups. It could be found that most variation is due to the MOSH of the paraffins. The PCA model was capable of differentiating between soft, liquid and solid paraffins on the one hand and between natural and synthetic liquid paraffins on the other hand. The impurity profiling of L-ascorbic acid 2-phosphate magnesium (A2PMg) was performed by means of one- and two-dimensional NMR spectroscopy. Several ethylated impurities could be detected, which were likely to be formed during synthesis of A2PMg. The structures of two of the ethylated impurities were identified as ascorbic acid 2-phosphate ethyl ester and ethanol, (residual solvent from synthesis). NMR spectroscopic studies of the fractions obtained from preparative HPLC of A2PMg revealed two additional impurities, which were identified as phosphorylated derivatives of ascorbic acid, ascorbic acid 3,5-phosphate and ascorbic acid 5-phosphate. Solid state mechanochemistry as an alternative approach for stress testing was applied on the drug substances S-Ibuprofen (Ibu) and Clopidogrel (CLP) using a ball mill, in order to study their degradation profile: First, the isomerization of S-Ibu was investigated, which was stressed in the solid state applying several milling frequencies and durations under basic, acidic and neutral conditions. For the separation of Ibu enantiomers, a chiral CE method was developed and validated according to ICH Q2(R1). It was found that S-Ibu is overall very stable to isomerization; it shows minor conversion into the R-enantiomer under basic environment applying long milling times and high frequencies. Last, the degradation profile of clopidogrel hydrogen sulfate (CLP) was investigated, which was stressed in the solid state under various oxidative conditions. An already existing HPLC-UV method was adjusted to sufficiently separate the degradation products, which were characterized by means of UV and MS/(MS) detection. Most of the degradation products identified were already reported to result from conventional CLP stress tests. The degradation profile of CLP was mainly influenced by the material of the milling jar and the type of catalyst used.},
  subject      = {HPLC},
  language  = {en}
}
@phdthesis{Kaufmann2019,
  author    = {Kaufmann, Christina},
  title     = {Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding},
  doi       = {10.25972/OPUS-17300},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-173005},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 {\AA} lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 {\AA} result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 {\AA} larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 {\AA}) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based "null-aggregate" could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 {\AA} defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly.},
  subject      = {Supramolekulare Chemie},
  language  = {en}
}
@phdthesis{Fimmel2015,
  author    = {Fimmel, Benjamin},
  title     = {Perylene Bisimide Foldamers: Synthesis and In-Depth Studies of the Ground- and Excited States Properties},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125173},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2015},
  abstract  = {In this thesis the syntheses and detailed investigations on two foldable PBI systems were presented. The reversible, solvent-dependet folding/unfolding-behavior was used to study the ground and excited states properties of folda-dimer and folda-trimer by means of different spectroscopic methods as well as theoretical studies. The switching between charge transfer or excimer formation pathways of photoexcited molecules influenced by the spatial arrangement of chromophores within defined dye systems illustrates the impact of conformational preferences on functional properties.},
  subject      = {Perylenbisdicarboximide <Perylen-3,4:9,10-bis(dicarboximide)>},
  language  = {en}
}
@phdthesis{Lother2013,
  author    = {Lother, Steffen Reiner},
  title     = {Entwicklung eines 3D MR-Tomographen zur Erdfeld- und multimodalen MR-MPI-Bildgebung},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-99181},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {Das Ziel dieser Arbeit war die Entwicklung und die Anfertigung eines 3D Erdfeld-NMR Tomographen, um damit die ben{\"o}tigte Technik der MR eines MR-MPI-Tomographen am Lehrstuhl zu etablieren. Daraufhin wurden alle n{\"o}tigen Komponenten f{\"u}r ein komplettes 3D Erdfeld-NMR-System entwickelt, gebaut und getestet. Mit diesem Wissen wurde in enger Zusammenarbeit mit der MPI-Arbeitsgruppe am Lehrstuhl ein multimodaler MR-MPI-Tomograph angefertigt und die prinzipielle Machbarkeit der technischen Kombination dieser zwei Modalit{\"a}ten (MRT/MPI) in einer einzigen Apparatur gezeigt. Auf diesem Entwicklungsweg sind zus{\"a}tzlich innovative Systemkomponenten entstanden, wie der Bau eines neuen Pr{\"a}polarisationssystems, mit dem das Pr{\"a}polarisationsfeld kontrolliert und optimiert abgeschaltet werden kann. Des Weiteren wurde ein neuartiges 3D Gradientensystem entwickelt, das parallel und senkrecht zum Erdmagnetfeld ausgerichtet werden kann, ohne die Bildgebungseigenschaften zu verlieren. Hierf{\"u}r wurde ein 3D Standard-Gradientensystem mit nur einer weiteren Spule, auf insgesamt vier Gradientenspulen erweitert. Diese wurden entworfen, gefertigt und anhand von Magnetfeldkarten ausgemessen. Anschließend konnten diese Ergebnisse mit der hier pr{\"a}sentierten Theorie und den Simulationsergebnissen {\"u}bereinstimmend verglichen werden. MPI (Magnetic Particle Imaging) ist eine neue Bildgebungstechnik mit der nur Kontrastmittel detektiert werden k{\"o}nnen. Das hat den Vorteil der direkten und eindeutigen Detektion von Kontrastmitteln, jedoch fehlt die Hintergrundinformation der Probe. Wissenschaftliche Arbeiten prognostizieren großes Potential, die Hintergrundinformationen der MRT mit den hochaufl{\"o}senden Kontrastmittelinformationen mittels MPI zu kombinieren. Jedoch war es bis jetzt nicht m{\"o}glich, diese beiden Techniken in einer einzigen Apparatur zu etablieren. Mit diesem Prototyp konnte erstmalig eine MR-MPI-Messung ohne Probentransfer durchgef{\"u}hrt und die empfindliche Lokalisation von Kontrastmittel mit der {\"U}berlagerung der notwendigen Hintergrundinformation der Probe gezeigt werden. Dies ist ein Meilenstein in der Entwicklung der Kombination von MRT und MPI und bringt die Vision eines zuk{\"u}nftigen, klinischen, multimodalen MR-MPI-Tomographen ein großes St{\"u}ck n{\"a}her.},
  subject      = {NMR-Spektroskopie},
  language  = {de}
}
@phdthesis{Skiera2013,
  author    = {Skiera, Christina},
  title     = {1H NMR spectroscopic determination of deterioration marker compounds in fats and oils},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-95756},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {In food and pharmaceutical analysis, the classical indices peroxide value (PV), acid value (AV) and p-anisidine value (ANV) still play an important role as quality and authenticity control parameters of fats and oils. These indices are sum parameters for certain deterioration products (PV for hydroperoxides, AV for free fatty acids, ANV for aldehydes) and are obtained using volumetric or UV/VIS spectroscopic analytical approaches. 1H NMR spectroscopy provides a fast and simple alternative to these classical approaches. In the present work, novel 1H NMR methods to determine hydroperoxides, free fatty acids and aldehydes in fats and oils were developed. Hydroperoxides: The influence of solvent, water, free fatty acids and sample weight on the hydroperoxide group proton (OOH) signal was investigated. On the basis of the obtained results, the sample preparation procedure of the new 1H NMR method was established. A rough assignment of the hydroperoxide group signals in edible fats and oils to methyl oleate, methyl linoleate and methyl linolenate was conducted. Furthermore, to gain information on how many different hydroperoxide species originate from trioleate autoxidation, a kinetic study on trioleate monohydroperoxides was performed. The evaluation of the data strongly indicates that all of the conceivable 18 trioleate monohydroperoxides were formed during trioleate autoxidation. The analytical performance of the NMR method was compared to that of the classical PV approach by means of the so-called "relative sensitivity" according to Mandel. It was shown that both methods exhibit a similar analytical performance. A total of 444 edible oil samples were analysed using both methods. For some oil varieties considerable discrepancies were found between the results. In the case of black seed oil and olive oil two substances were identified that influence the classical PV determination and thus cause positive (black seed oil) and negative (olive oil) deviations from the theoretical PV expected from the NMR values. Free fatty acids: In order to find the optimal solvent mixture to measure the carboxyl group protons (COOH) of free fatty acids in fats and oils, the effect of solvent on the COOH signal was investigated for different mixtures of CDCl3 and DMSO-d6. The comparison of the NMR method with the classical AV method by means of the relative sensitivity revealed that both methods exhibit a similar analytical performance. 420 edible oil samples were analysed by both approaches. Except for pumpkin seed oil, where slight deviations were observed, there was a good compliance between the results obtained from the two methods. Furthermore, the applicability of the 1H NMR assay to further lipids with relevance in pharmacy was tested. For hard fat, castor oil, waxes and oleyl oleate modifications of the original sample preparation procedure of the NMR method were necessary to achieve comparable results for both methods. Aldehydes: The new 1H NMR method enables the determination of the molar amounts of n-alkanals, (E)-2-alkenals and (E,E)-2,4-alkadienals. It was illustrated that the ANV can be modelled as a linear combination of the NMR integrals of these aldehyde species. A functional relationship was derived on the basis In conclusion, the new 1H NMR methods provide an excellent alternative to of calibration experiments. The suitability of the model was shown by comparing the NMR-determined ANVs with the measured classical ANVs of 79 commercially available edible oils of different oil types. In conclusion, the new 1H NMR methods provide an excellent alternative to the determination of the classical indices PV, AV and ANV. They have several advantages over the classical methods including the consumption of small solvent amounts, the ability to automatize measurement and to acquire several different parameters out of the same NMR spectrum. Especially concerning their selectivity, the 1H NMR methods are highly superior to the classical methods.},
  subject      = {Fett},
  language  = {en}
}