@phdthesis{Stepanenko2008, author = {Stepanenko, Vladimir}, title = {Self-Assembly of Bay-Substituted Perylene Bisimide by Ligand-Metal Ion Coordination}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-32063}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {The subject of this thesis is the synthesis and characterization of PBI-based fluorescent metallosupramolecular polymers and cyclic arrays. Terpyridine receptor functionalized PBIs of predesigned geometry have been used as building blocks to construct desired macromolecular structures through metal-ion-directed self-assembly. These metallosupramolecular architectures have been investigated by NMR, UV/Vis and fluorescence spectroscopy, mass spectrometry, and atomic force microscopy.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Schmidt2011, author = {Schmidt, Ralf}, title = {Hamilton-Receptor-Mediated Self-Assembly of Merocyanine Dyes into Supramolecular Polymers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56265}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Die Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren wurde untersucht. Dabei konnte die Anordnung der hoch dipolaren Farbstoffe durch die Verwendung von verschiedenen Kombinationen von Wasserstoffbr{\"u}ckenbindungsmotiven und dipolarer Aggregation der Chromophore gesteuert.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{Schafferhans2011, author = {Schafferhans, Julia}, title = {Investigation of defect states in organic semiconductors: Towards long term stable materials for organic photovoltaics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-57669}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {In this work, the trap states in the conjugated polymer P3HT, often used as electron donor in organic bulk heterojunction solar cells, three commonly used fullerene based electron acceptors and P3HT:PC61BM blends were investigated. Furthermore, the trap states in the blend were compared with these of the pure materials. Concerning the lifetime of organic solar cells the influence of oxygen on P3HT and P3HT:PC61BM blends was studied. The experimental techniques used to investigate the trap states in the organic semiconductors were (fractional) thermally stimulated current (TSC) and current based deep level transient spectroscopy (Q-DLTS). Fractional TSC measurements on P3HT diodes revealed a quasi-continuous trap distribution. The distribution suggested two different traps in P3HT with approximately Gaussian energy distributions and maxima at about 50 meV and 105 meV. Thereby, the former was attributed to the tail states within the regular Gaussian density of states due to the low activation energy. The latter, deeper traps, however, exhibited a strong dependence on oxygen. Exposure of the P3HT diodes to oxygen, ambient air and synthetic (dry) air all revealed an increase of the deeper traps density with exposure time in the same manner. While the lower limit of the trap density in non aged P3HT samples was in the range of (1.0 - 1.2)×10^22 m^-3, it was more than doubled after an exposure of 50 h to air. An increase of the trap density with oxygen exposure time was also seen in the Q-DLTS measurements accompanied with an increase of the temperature dependence of the emission rates, indicating an enhanced formation of deeper traps. Due to the raise in density of the deeper traps, the charge carrier mobility in P3HT significantly decreased, as revealed by photo-CELIV measurements, resulting in a loss in mobility of about two orders of magnitude after 100 h exposure to synthetic air. The increased trap density was attributed to p-doping of P3HT by the transfer of an electron to adsorbed oxygen. This effect was partially reversible by applying vacuum to the sample for several hours or, more significantly, by a thermal treatment of the devices in nitrogen atmosphere. The trap states in the methanofullerenes PC61BM, bisPC61BM and PC71BM were investigated by TSC measurements. PC61BM yielded a broad quasi-continuous trap distribution with the maximum of the distribution at about 75 meV. The comparison of the TSC spectra of the three methanofullerenes exhibited significant differences in the trap states with higher activation energies of the most prominent traps in bisPC61BM and PC71BM compared to PC61BM. This probably originates from the different isomers bisPC61BM and PC71BM consist of. Each of the isomers yields different LUMO energies, where the lower ones can act as traps. The lower limit of the trap density of all of the three investigated fullerene derivatives exhibited values in the order of 10^22 m^-3, with the highest for bisPC61BM and the lowest for PC61BM. By applying fractional TSC measurements on P3HT:PC61BM solar cells, it was shown that the trap distribution in the blend is a superposition of the traps in pure P3HT and PC61BM and additional deeper traps in the range of about 250 meV to 400 meV. The origin of these additional traps, which can not be related to the pure materials, was attributed to a higher disorder in the blend and P3HT/PC61BM interfaces. This conclusion was supported by standard TSC and Q-DLTS measurements performed on pristine and annealed P3HT:PC61BM blends, exhibiting a higher ratio of the deep traps in the pristine samples. The lower limit of the trap density of the investigated annealed solar cells was in the range of (6-8)×10^22 m^-3, which was considerably higher than in the pure materials. The influence of oxygen on P3HT:PC61BM solar cells was investigated by exposure of the devices to synthetic air under specific conditions. Exposure of the solar cells to oxygen in the dark resulted in a strong decrease in the power conversion efficiency of 60 \% within 120 h, which was only caused by a loss in short-circuit current. Simultaneous illumination of the solar cells during oxygen exposure strongly accelerated the degradation, resulting in an efficiency loss of 30 \% within only 3 h. Thereby, short-circuit current, open-circuit voltage and fill factor all decreased in the same manner. TSC measurements revealed an increase of the density of deeper traps for both degradation conditions, which resulted in a decrease of the mobility, as investigated by CELIV measurements. However, these effects were less pronounced than in pure P3HT. Furthermore, an increase of the equilibrium charge carrier density with degradation time was observed, which was attributed to oxygen doping of P3HT. With the aid of macroscopic simulations, it was shown that the doping of the solar cells is the origin of the loss in short-circuit current for both degradation conditions.}, subject = {Organischer Halbleiter}, language = {en} } @phdthesis{Heffels2012, author = {Heffels, Karl-Heinz}, title = {Functional nanofibres for regenerative medicine}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-75684}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {This thesis concerned the design and examination of a scaffold for tissue engineering applications. The template for the presented scaffold came from nature itself: the intercellular space in tissues that provides structure and support to the cells of the respective tissue, known as extracellular matrix (ECM). Fibres are a predominant characteristic feature of ECM, providing adhesion sites for cell-matrix interactions. In this dissertation a fibrous mesh was generated using the electrospinning technique to mimic the fibrous structure of the ECM. Two base polymers were explored: a biodegradable polyester, poly(D,L-lactide-co-glycolide); and a functional PEG-based star polymer, NCO-sP(EO-stat-PO). This topic was described in three major parts: the first part was materials based, concerning the chemical design and characterisation of the polymer scaffolds; the focus was then shifted to the cellular response to this fibrous scaffold; and finally the in vivo performance of the material was preliminarily assessed. The first steps towards an electrospun mesh started with adjusting the spinning parameters for the generation of homogeneous fibres. As reported in Chapter 3 a suitable setup configuration was on the one hand comprised of a spinning solution that consisted of 28.5 w/v\% PLGA RG 504 and 6 w/v\% NCO-sP(EO-stat-PO) in 450 µL acetone, 50 µL DMSO and 10 µL of an aqueous trifluoroacetic acid solution. On the other hand an ideal spinning behaviour was achieved at process parameters such as a flow rate of 0.5 mL/h, spinneret to collector distance of 12-16 cm and a voltage of 13 kV. The NCO-sP(EO-stat-PO) containing fibres proved to be highly hydrophilic as the functional additive was present on the fibre surface. Furthermore, the fibres featured a bulk degradation pattern as a consequence of the proportion of PLGA. Besides the morphologic similarity to ECM fibres, the functionality of the electrospun fibres is also decisive for a successful ECM mimicry. In Chapter 4, the passive as well as active functionality of the fibres was investigated. The fibres were required to be protein repellent to prevent an unspecific cell adhesion. This was proven as even 6.5 \% sP(EO-stat-PO) in the PLGA fibres reduced any unspecific protein adsorption of bovine serum albumin and foetal calf serum to less than 1 \%. However, avidin based proteins attached to the fibres. This adhesion process was avoided by an additional fibre surface treatment with glycidol. The active functionalisation of NCO-sP(EO-stat-PO)/PLGA fibres was investigated with two fluorescent dyes and biocytin. A threefold, chemically orthogonal, fibre modification was achieved with these dyes. The chapters about the chemical and mechanical properties laid the basis for the in vitro chapters where a specific fibre functionalisation with peptides was conducted to analyse the cell adhesion and biochemical expressions. Beginning with fibroblasts in Chapter 5 the focus was on the specific cell adhesion on the electrospun fibres. While NCO-sP(EO-stat-PO)/PLGA fibres without peptides did not allow any adhesion of fibroblasts, a fibre modification with GRGDS (an adhesion mediating peptide sequence) induced the adhesion and spreading of human dermal fibroblasts on the fibrous scaffolds. The control sequence GRGES that has no adhesion mediating qualities did not lead to any cell adhesion as observed on fibres without modifications. While the experiments of Chapter 5 were a proof-of-concept, in Chapter 6 a possible application in cartilage tissue engineering was examined. Therefore, primary human chondrocytes were seeded on fibrous scaffolds with various peptide sequences. Though the chondrocytes exhibited high viability on all scaffolds, an active interaction of cells and fibres was only found for the decorin derived sequence CGKLER. Live-cell-imaging revealed both cell attachment and migration within CGKLER-modified meshes. As chondrocytes undergo a de-differentiation towards a fibroblast-like phenotype, the chondrogenic re-differentiation on these scaffolds was investigated in a long term cell culture experiment of 28 days. Therefore, the glycosaminoglycan production was analysed as well as the mRNA expression of genes coding for collagen I and II, aggrecan and proteoglycan 4. In general only low amounts of the chondrogenic markers were measured, suggesting no chondrogenic differentiation. For conclusive evidence follow-up experiments are required that support or reject the findings. The success of an implant for tissue engineering relies not only on the response of the targeted cell type but also on the immune reaction caused by leukocytes. Hence, Chapter 7 dealt with primary human macrophages and their behaviour and phenotype on two-dimensional (2D) surfaces compared to three-dimensional (3D) fibrous substrates. It was found that the general non-adhesiveness of NCO-sP(EO-stat-PO) surfaces and fibres does not apply to macrophages. The cells aligned along the fibres on surfaces or resided in the pores of the meshes. On flat surfaces without 3D structure the macrophages showed a retarded adhesion kinetic accompanied with a high migratory activity indicating their search for a topographical feature to adhere to. Moreover, a detailed investigation of cell surface markers and chemokine signalling revealed that macrophages on 2D surfaces exhibited surface markers indicating a healing phenotype while the chemokine release suggested a pro-inflammatory phenotype. Interestingly, the opposite situation was found on 3D fibrous substrates with pro-inflammatory surface markers and pro-angiogenic cytokine release. As the immune response largely depends on cellular communication, it was concluded that the NCO-sP(EO-stat-PO)/PLGA fibres induce an adequate immune response with promising prospects to be used in a scaffold for tissue engineering. The final chapter of this thesis reports on a first in vivo study conducted with the presented electrospun fibres. Here, the fibres were combined with a polypropylene mesh for the treatment of diaphragmatic hernias in a rabbit model. Two scaffold series were described that differed in the overall surface morphology: while the fibres of Series A were incorporated into a thick gel of NCO-sP(EO-stat-PO), the scaffolds of Series B featured only a thin hydrogel layer so that the overall fibrous structure could be retained. After four months in vivo the treated defects of the diaphragm were significantly smaller and filled mainly with scar tissue. Thick granulomas occurred on scaffolds of Series A while the implants of Series B did not induce any granuloma formation. As a consequence of the generally positive outcome of this study, the constructs were enhanced with a drug release system in a follow-up project. The incorporated drug was the MMP-inhibitor Ilomastat which is intended to reduce the formation of scar tissue. In conclusion, the simple and straight forward fabrication, the threefold functionalisation possibility and general versatile applicability makes the meshes of NCO-sP(EO-stat-PO)/PLGA fibres a promising candidate to be applied in tissue engineering scaffolds in the future.}, subject = {Nanofaser}, language = {en} } @phdthesis{Voelker2014, author = {V{\"o}lker, Sebastian}, title = {Synthesis, Spectroscopic and Electrochemical Properties of Squaraine Polymers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-101638}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {In this work the synthesis, the spectroscopic and electrochemical investigation as well as some applications of a broad diversity of indolenine squaraine dyes were presented. This diversity was based on two parent squaraine dyes, one standard trans-configured compound (M1) and one in which one central oxygen atom was replaced by a dicyanomethylene moiety (M2), which increased the acceptor strength and induced a cis-configuration. The variety of synthesised dyes included functionalised squaraine monomers, donor- and acceptor-substituted monomeric model squaraines, donor- and acceptor-squaraine copolymers, pure squaraine homopolymers, a squaraine-squaraine copolymer, as well as some conjugated cyclic oligomers. In order to be able to synthesise all these different kinds of dyes, several bromine and boronic ester derivatives were synthesised, which enabled the use of the Suzuki cross coupling reaction, to generate model dyes and copolymers. In addition, the bromine derivatives were used to carry out the Yamamoto homocoupling reaction to the respective homopolymers and macrocycles. The absorption maximum of unsubstituted reference dye M1 was found at ~ 15500 cm-1, while that of M2 was red-shifted to ~ 14300 cm-1 due to the increased acceptor strength of the central unit. The extinction coefficients were in the order of ~ 300000 M-1 cm-1 and ~ 200000 M-1 cm-1, respectively. It was found that the implementation of functional groups (M3-M9), additional electron donors (M10-M19) or acceptors (M20-M22) at the periphery lead to bathochromic shifts of the absorption depending on the strength of either - and/or -donating properties of the substituents. For the bis- and triarylamine substituted dyes M10-M13 and the dibrominated dyes M5 and M7 the electronic structure of the mono- and diradical (di)cations was explored using the interplay of cyclic voltammetry, spectroelectrochemistry, and DFT calculations. It was demonstrated that the monoradical cations still show a cyanine-like character and are delocalised Robin-Day class III species due to the low redox potential of the squaraine bridge between the additional amine redox centres. To the best of my knowledge, this made M13+∙, with an N-N-distance of 26 bonds between the additional redox centres to the longest bis(triarylamine) radical cation that is completely delocalised. For the diradical dications, the situation was of larger complexity. The computed most stable energetic state of the dianisylamine-substituted dyes turned out to be a broken-symmetry state with almost equal contributions of an open-shell singlet and triplet state. In addition, it was shown that the HOMO-1→HOMO transition dominated the absorption spectra of the diradical dications where the trans-/cis-configuration of the squaraines had a direct impact due to symmetry reasons. Based on the donor-squaraine model compounds M10-M19, a series of donor-squaraine copolymers was synthesised (P7-P12) in order to further red shift and broaden the low energy absorption band. However, these effects were only of marginal extent. Both the optical and the electrochemical derived band gaps were barely lowered compared to the respective monomeric model dyes. This was assigned to an increased squaraine-squaraine distance and resulting lower exciton coupling between the squaraine chromophores due to the bridging units. In addition, according to semiempirical calculations the bridges were twisted out of the squaraine plane what reduced conjugational effects between the chromophores. To sum up, the idea to insert additional electron rich bridging units in order to create copolymers with broad and red-shifted absorption did not fully work out for the presented systems. The addition of strong electron accepting NDI units at the periphery resulted in M21, the most unique monomeric model squaraine in this work. The common picture of a sharp low energy squaraine absorption completely altered due to the addition of the NDIs and a rather broad and solvent dependent low energy absorption was found. Spectroelectrochemical experiments and semiempirical calculations showed that this band is a superposition of the common squaraine HOMO→LUMO transition and a partial squaraine→NDI charge transfer transition. The latter was lost upon oxidation of the squaraine and the absorption spectrum of the monocation of M21 was found to be nearly a 1:1 image of a pure squaraine monocation. Both the monomeric model M21 and the respective copolymer P13 showed low electrochemically obtained band gaps of 1.05-1.20 eV, which were the lowest of all squaraines in this work. For both dyes, transient absorption measurements in the fs-time regime revealed the ultrafast formation of a CS state via an intermediate CT state within a few ps. Besides, charge recombination to the ground state also occured within a few ps. In the polymer, there was barely any further energy or charge transfer within the excited state lifetime and therefore the CS state was confined on adjacent squaraine-NDI pairs and did not further travel along the polymer strand. The Ni-mediated Yamamoto homocoupling reaction was applied for the synthesis of the homopolymers (P1-P5). In contrast to the donor-squaraine copolymers, those polymers revealed strongly red-shifted and broad absorption in the red to NIR region in addition to a sharp fluorescence. These features could be explained to originate mainly from the exciton coupling of localised excited states and the presence of different superstructures in solution. For the polymers P1 and P2, an elongated J-type polymer chain caused the strong lowest energy absorption band whereas a zig-zag type arrangement of the single chromophores lead to transitions into both low and high energy excited states of the excitonic manifold. For the polymers P3 and P4, several polymer fractions of different size were investigated. Here, also an elongated chain with J-type character induced the lowest energy absorption band whereas a helical H-type arrangement caused transitions to higher energies of the excitonic manifold. The fractions to which these structures were formed depended on the chain length and the solvent. In thin film measurements, it was shown that the initially in solution formed superstructures were partly retained in the thin film but could be altered by annealing procedures. A control of the superstructures should enable the controlled tuning of the optical properties. Despite the strong interaction of the chromophores in the excited state, the redox potentials of the homopolymers barely differed to those of the respective reference dyes, indicating negligible electronic interaction in the ground state. In addition squaraine-squaraine copolymer P6, consisting of alternating parent dyes M1 and M2, was synthesised. Likewise to the homopolymers, a broad and red-shifted absorption was observed. This was explained by exciton coupling theory, which was extended to also suit alternating copolymers. In toluene, an extraordinary narrow and intense lowest energy absorption band was observed. This exchange narrowing might be a result of a highly ordered J-type structure of the polymer especially in this solvent because it was not found in others. The features of the polymer may be compared to typical J-aggregates formed from monomeric cyanine molecules for example and the polymer used as model for excitonic interactions in an alternating copolymer. Transient absorption measurements revealed a strong energy dependence of the decay traces of the copolymer, most strikingly at early decay times. This was assigned to the occurrence of multiple excitations of one polymer strand (due to the large extinction coefficients of the polymer) and resulting exciton-exciton annihilation. Due to the large exciton diffusion constants that were estimated, the static exciton-exciton annihilation was the rate limiting process of the decay, in contrast to other conjugated polymers, where in thin film measurements the decay was diffusion controlled. To sum up, for the polymers consisting of exclusively squaraine chromophores, it was shown that the exciton coupling of single chromophores with strong transition dipole moments was a fruitful way to tune the absorption spectra. As a side product of some of the polycondensation reactions, unprecedented cyclic conjugated oligomers such as the triarylamine-bridged dimer Dim1, the cyclic homotrimers Tri1-Tri3, and the tetramer Tet1 were obtained by recycling GPC in low yields. Especially the cyclic trimers showed unusual absorption and even more extraordinary fluorescence properties. They showed multiple fluorescence bands in the NIR that covered a range from ~ 8000-12500 cm-1 (800-1250 nm). First hints from theoretical calculations indicated that the trimer was not fully planar but comprised a mixture of both planar and bent single squaraine chromophores. However, final results of the calculations were still missing at the time of writing. In the last part of this work, the application of some monomeric and polymeric squaraines in binary and ternary bulk heterojunction solar cells was demonstrated. Also the utilisation as a dopant in a polymer matrix in an OLED device was shown. The homopolymers P1-P4 were tested in the binary BHJ solar cells revealing poor performances and especially very low short circuit currents. The utilisation of the polymers P3 and P4 that carried the dicyanomethylene group resulted in higher open circuit voltages due to the lower LUMO energy levels but still an overall poor performance. Neither for the different alkyl chains nor for the size of the polymers was a trend observed. In the ternary BHJ solar cells, small amounts of either monomer M14 or polymers P1A, P4-1 or P13 were added to a P3HT/PCBM system in order to generate an additional pathway for charge or energy transfer that should result in a better device performance. However, for none of the tested squaraines, improved solar cells could be built. In similarity to the binary solar cells, the short circuit currents were lower compared to a P3HT/PCBM reference device. These low short circuit currents indicated that the morphology of the squaraine dyes was the major limitation in those devices. It is possible that the dimethyl groups at the indolenine hindered a favoured alignment of the compounds that would allow decent charge transport. In the squaraine doped OLED the squaraine M6 worked rather well as an NIR emitter. Already at low dye loads the fluorescence of the host polymer SY-PPV was completely quenchend and emission from the squaraine was observed. For electroluminescence measurements, a lower dye load (0.5 wt.\%) compared to the photoluminescence measurements was sufficient, indicating that apart from FRET additional quenching mechanisms were at work in the electrically driven devices such as charge carrier dynamics.}, subject = {Squaraine}, language = {en} } @phdthesis{Kessler2015, author = {Keßler, Martina}, title = {Biodegradable solvent cast films and solution electrospun meshes for the prevention of postsurgical adhesions}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-129358}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Intraperitoneal adhesions are fibrous bands that connect tissues in the peritoneal cavity that are usually separated. These adhesions form as a consequence of trauma, inflammation or surgical interventions and often result in severe consequences such as chronic pain, small bowel obstructions or female infertility. The aim of this thesis was to develop a synthetic barrier device for adhesion prevention made of modified poly(lactide) [PLA]. Solid PLA films (SurgiWrap®) are already successfully in clinical use due to the good biocompatibility and the biodegradability of the material resulting in non-toxic degradation products since lactic acid is naturally part of the metabolic circles of the human body. Considering the brittleness and stiffness of the films, the long degradation time of several months as well as the need for suturing, there is potential for optimization. Through a copolymerization with the hydrophilic poly(ethylene glycol) [PEG], a reduction of the degradation time was intendend. Moreover, the copolymerization should also lead to an improvement of the mechanical properties of the films since PEG acts as plasticizer for PLA. Linear PLA-PEG-PLA triblock copolymers as well as star-shaped PEG-PLA copolymers were synthesized via standard ring opening polymerization to tailor the barrier properties. Besides solid films, solution electrospun meshes from PLA and the synthesized PEG-PLA copolymers were investigated for a potential application as well. Since suturing of a barrier additionally induces adhesion formation, alginate coated membranes were prepared in order to achieve self-adhesiveness. With the intention to reduce infections and consequently inflammation, electrospun meshes and solvent cast films were loaded with the antibacterial drug triclosan and drug release as well as antibacterial efficacy was investigated. Mechanical tests confirmed that through the variation of the PEG content and branching the mechanical properties can be tailored and are in good accordance with the glass transition temperatures [Tg] of the polymers. Consequently, potentially adequate mechanical properties for surgical handling as well as for the performance within the patient's body were successfully achieved. Degradation studies revealed that the degradation time was significantly shorter for PEG-PLA membranes than for PLA films and with an appropriate PEG content could be adjusted to the intended time frame. Cell adhesion and viability tests confirmed the non-toxicity of the clinically used PLA films as well as of PEG-PLA films and meshes. With a bioadhesion test the benefit of an alginate coated side towards the pure PLA film concerning self-adhesiveness was successfully demonstrated. Moreover, optical evaluations and a T-peel test of different alginate coated PLA films showed that the cohesion between the chemically different layers was distinctly enhanced by the use of an appropriate PEG-PLA mesh as intermediate cohesion promoting layer. In in vitro release studies with triclosan loaded films a higher release was determined for PEG-PLA than for PLA films. In agar diffusion tests a higher and longer inhibition of staphylococcus aureus growth was observed confirming the release results. Moreover, drug loaded meshes (especially drug loaded after electrospinning) showed enhanced and elongated bacterial inhibition in comparison to films.}, subject = {Polymere}, language = {en} } @phdthesis{Munzert2018, author = {Munzert, Stefanie Martina}, title = {Coordination of dynamic metallosupramolecular polymers (MEPEs)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-160650}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Several transition metal ions, like Fe2+, Co2+, Ni2+, and Zn2+ complex to the ditopic ligand 1,4-bis(2,2':6',2''-terpyridin-4'-yl)benzene. Due to the high association constant, metal ion induced self-assembly of Fe2+, Co2+, and Ni2+ leads to extended, rigid-rod like metallo-supramolecular coordination polyelectrolytes (MEPEs) even in aqueous solution. Here, the kinetics of coordination and the kinetics of growth of MEPEs are presented. The species in solutions are analyzed by stopped-flow fluorescence spectroscopy, light scattering, viscometry and cryogenic transmission electron microscopy. At near-stoichiometric amounts of the reactants, high molar masses are obtained, which follow the order Ni-MEPE ~ Co-MEPE < Fe-MEPE. Furthermore, a way is presented to adjust the average molar mass, chain-length and viscosity of MEPEs using the monotopic chain stopper 4'-(phenyl)-2,2':6',2''-terpyridine.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Namal2018, author = {Namal, Imge}, title = {Fabrication and Optical and Electronic Characterization of Conjugated Polymer-Stabilized Semiconducting Single-Wall Carbon Nanotubes in Dispersions and Thin Films}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-162393}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {In order to shrink the size of semiconductor devices and improve their efficiency at the same time, silicon-based semiconductor devices have been engineered, until the material almost reaches its performance limits. As the candidate to be used next in semiconducting devices, single-wall carbon nanotubes show a great potential due to their promise of increased device efficiency and their high charge carrier mobilities in the nanometer size active areas. However, there are material based problems to overcome in order to imply SWNTs in the semiconductor devices. SWNTs tend to aggregate in bundles and it is not trivial to obtain an electronically or chirally homogeneous SWNT dispersion and when it is done, a homogeneous thin film needs to be produced with a technique that is practical, easy and scalable. This work was aimed to solve both of these problems. In the first part of this study, six different polymers, containing fluorene or carbazole as the rigid part and bipyridine, bithiophene or biphenyl as the accompanying copolymer unit, were used to selectively disperse semiconducting SWNTs. With the data obtained from absorption and photoluminescence spectroscopy of the corresponding dispersions, it was found out that the rigid part of the copolymer plays a primary role in determining its dispersion efficiency and electronic sorting ability. Within the two tested units, carbazole has a higher π electron density. Due to increased π-π interactions, carbazole containing copolymers have higher dispersion efficiency. However, the electronic sorting ability of fluorene containing polymers is superior. Chiral selection of the polymers in the dispersion is not directly foreseeable from the selection of backbone units. At the end, obtaining a monochiral dispersion is found to be highly dependent on the used raw material in combination to the preferred polymer. Next, one of the best performing polymers due to high chirality enrichment and electronic sorting ability was chosen in order to disperse SWNTs. Thin films of varying thickness between 18 ± 5 to 755o±o5 nm were prepared using vacuum filtration wet transfer method in order to analyze them optically and electronically. The scalability and efficiency of the integrated thin film production method were shown using optical, topographical and electronic measurements. The relative photoluminescence quantum yield of the radiative decay from the SWNT thin films was found to be constant for the thickness scale. Constant roughness on the film surface and linearly increasing concentration of SWNTs were also supporting the scalability of this thin film production method. Electronic measurements on bottom gate top contact transistors have shown an increasing charge carrier mobility for linear and saturation regimes. This was caused by the missing normalization of the mobility for the thickness of the active layer. This emphasizes the importance of considering this dimension for comparison of different field effect transistor mobilities.}, subject = {Feldeffekttransistor}, language = {en} } @phdthesis{Ulbricht2018, author = {Ulbricht, Juliane}, title = {Insights into Polymer Biodegradation - Investigations on oxidative, hydrolytic and enzymatic Pathways}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-158683}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {The present work aims towards the investigation of polymer degradation under biologically relevant conditions. In order to assess a potential degradation of polymers of interest for biomedical applications in vivo and associated effects on living tissue, representatives of poly(2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) and poly(N-vinylpyrrolidone) for reference purposes are examined regarding their stability under oxidative and hydrolytic conditions as well as towards enzymatic degradation. The polymers investigated in the framework of this thesis are generally considered to be non-biodegradable. Both poly(ethylene glycol) and poly(N-vinylpyrrolidone) are or were applied intensively in vivo provoking seriously harmful side effects like fatal blood poisoning from the oxidation of poly(ethylene glycol) chain ends or poly(N-vinylpyrrolidone) storage disease. Poly(2-alkyl-2-oxazoline)s and polypeptoids, both promising polymeric biomaterials for a wide variety of in vivo applications, are not clinically applied yet but undergo thorough investigations. However, comprising amide bonds within the backbone or the appending side chain, poly(2-alkyl-2-oxazoline)s and polypeptoids potentially offer a higher susceptibility towards (bio-)degradation. Representing the three most impactful initiators of degradation in vivo, the present study is focused on polymer deterioration by oxidative species, hydrolytic conditions and enzymes. Oxidative species are generated in a variety of processes in vivo, both on purpose and as an unintentional by-product. Previous investigations revealed the susceptibility of poly(ethylene glycol), poly(N-vinylpyrrolidone), poly(2-alkyl-2-oxazoline)s and polypeptoids to deterioration by hydroxyl radicals deriving from hydrogen peroxide and copper ions. The obtained data confirm previous results of an apparent degradation rate increasing with increasing chain length due to self-inhibitory end group effects for all investigated polymer species. Although the exact concentrations of oxidative species in vivo are very controversial, with respect to their great variety and wide distribution the investigated polymers are likely prone to oxidative deterioration to some extent, with rates, mechanisms and degradation products strongly depending on the respective reactive species, polymer structure and chain length. Like blood, most tissues of the human body benefit from a slightly alkaline pH value. Nevertheless, specific areas like the human stomach or tumor tissues possess acidic conditions potentially capable to cleave amide bonds comprised by poly(2-alkyl-2-oxazoline)s and polypeptoids. Unlike the hydrolysis of poly(2-alkyl-2-oxazoline)s resulting in side chain cleavage, the hydrolysis of polypeptoids induces backbone scission decreasing the polymer chain length tremendously and releasing, if performed exhaustively, the respective amino acids. Hydrolysis of polysarcosine is monitored by quantification of the released sarcosine via 1H-NMR spectroscopy and determination of the residual Mw via GPC. Its cyclic dimer sarcosine anhydride is formed as an intermediate product in this process via cyclization of unstable linear dimers of sarcosine. Modification and degradation of bio(macro)molecules is an essential part of human metabolism. Polymers bearing amide bonds and showing a great similarity to natural occurring and widely distributed polypeptides, like poly(2-alkyl-2-oxazoline)s and polypeptoids, bear the potential of an enzymatic biodegradability by (more or less specific) peptidases. Just like the acidic hydrolysis described previously, peptidase activity would result in the cleavage of polymer amide bonds. The aim of the present thesis was to evaluate the stability of poly(2-alkyl-2-oxazoline)s and polypeptoids as well as poly(ethylene glycol) for the sake of reference under circumstances resembling in vivo conditions as closely as possible. Initial experiments focused on the degradation of dye-labeled upon incubation with homogenates of freshly harvested rat liver and kidney. However, although the obtained results are promising for the most part, they are considered rather unreliable and non-reproducible for various reasons. More conclusive data are attained from the incubation of non-labeled polymers in freshly laid chicken eggs. While no evidence for an enzymatic digestion of poly(ethylene glycol) in chicken egg white is found and deterioration of poly(2-methyl-2-oxazoline) upon incubation apparently derives from non-enzymatic hydrolysis, incubated polysarcosine samples reveal distinct elugram patterns depending on the respective C- and N-terminal end groups indicating both exopeptidase and endopeptidase activity. It has to be kept in mind though, that an enzymatic digestibility of polysarcosine does not necessarily imply the digestion of polypeptoids bearing longer side chains by peptidases as well, which should be investigated in further studies.}, subject = {Biologischer Abbau}, language = {en} } @phdthesis{Lorson2019, author = {Lorson, Thomas}, title = {Novel Poly(2-oxazoline) Based Bioinks}, doi = {10.25972/OPUS-18051}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-180514}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Motivated by the great potential which is offered by the combination of additive manufacturing and tissue engineering, a novel polymeric bioink platform based on poly(2 oxazoline)s was developed which might help to further advance the young and upcoming field of biofabrication. In the present thesis, the synthesis as well as the characteristics of several diblock copolymers consisting of POx and POzi have been investigated with a special focus on their suitability as bioinks. In general, the copolymerization of 2-oxazolines and 2-oxazines bearing different alkyl side chains was demonstrated to yield polymers in good agreement with the degree of polymerization aimed for and moderate to low dispersities. For every diblock copolymer synthesized during the present study, a more or less pronounced dependency of the dynamic viscosity on temperature could be demonstrated. Diblock copolymers comprising a hydrophilic PMeOx block and a thermoresponsive PnPrOzi block showed temperature induced gelation above a degree of polymerization of 50 and a polymer concentration of 20 wt\%. Such a behavior has never been described before for copolymers solely consisting of poly(cyclic imino ether)s. Physically cross linked hydrogels based on POx b POzi copolymers exhibit reverse thermal gelation properties like described for solutions of PNiPAAm and Pluronic F127. However, by applying SANS, DLS, and SLS it could be demonstrated that the underlying gel formation mechanism is different for POx b POzi based hydrogels. It appears that polymersomes with low polydispersity are formed already at very low polymer concentrations of 6 mg/L. Increasing the polymer concentration resulted in the formation of a bicontinuous sponge like structure which might be formed due to the merger of several vesicles. For longer polymer chains a phase transition into a gyroid structure was postulated and corresponds well with the observed rheological data. Stable hydrogels with an unusually high mechanical strength (G' ~ 4 kPa) have been formed above TGel which could be adjusted over a range of 20 °C by changing the degree of polymerization if maintaining the symmetric polymer architecture. Variations of the chain ends revealed only a minor influence on TGel whereas the influence of the solvent should not be neglected as shown by a comparison of cell culture medium and MilliQ water. Rotationally as well as oscillatory rheological measurements revealed a high suitability for printing as POx b POzi based hydrogels exhibit strong shear thinning behavior in combination with outstanding recovery properties after high shear stress. Cell viability assays (WST-1) of PMeOx b PnPrOzi copolymers against NIH 3T3 fibroblasts and HaCat cells indicated that the polymers were well tolerated by the cells as no dose-dependent cytotoxicity could be observed after 24 h at non-gelling concentrations up to 100 g/L. In summary, copolymers consisting of POx and POzi significantly increased the accessible range of properties of POx based materials. In particular thermogelation of aqueous solutions of diblock copolymers comprising PMeOx and PnPrOzi was never described before for any copolymer consisting solely of POx or POzi. In combination with other characteristics, e.g. very good cytocompatibility at high polymer concentrations and comparably high mechanical strength, the formed hydrogels could be successfully used for 3D bioprinting. Although the results appear promising and the developed hydrogel is a serious bioink candidate, competition is tough and it remains an open question which system or systems will be used in the future.}, subject = {Polymere}, language = {en} }