@article{WeigandBoosTasbihietal.2016, author = {Weigand, Annika and Boos, Anja M. and Tasbihi, Kereshmeh and Beier, Justus P. and Dalton, Paul D. and Schrauder, Michael and Horch, Raymund E. and Beckmann, Matthias W. and Strissel, Pamela L. and Strick, Reiner}, title = {Selective isolation and characterization of primary cells from normal breast and tumors reveal plasticity of adipose derived stem cells}, series = {Breast Cancer Research}, volume = {18}, journal = {Breast Cancer Research}, number = {32}, doi = {10.1186/s13058-016-0688-2}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164759}, year = {2016}, abstract = {Background There is a need to establish more cell lines from breast tumors in contrast to immortalized cell lines from metastatic effusions in order to represent the primary tumor and not principally metastatic biology of breast cancer. This investigation describes the simultaneous isolation, characterization, growth and function of primary mammary epithelial cells (MEC), mesenchymal cells (MES) and adipose derived stem cells (ADSC) from four normal breasts, one inflammatory and one triple-negative ductal breast tumors. Methods A total of 17 cell lines were established and gene expression was analyzed for MEC and MES (n = 42) and ADSC (n = 48) and MUC1, pan-KRT, CD90 and GATA-3 by immunofluorescence. DNA fingerprinting to track cell line identity was performed between original primary tissues and isolates. Functional studies included ADSC differentiation, tumor MES and MEC invasion co-cultured with ADSC-conditioned media (CM) and MES adhesion and growth on 3D-printed scaffolds. Results Comparative analysis showed higher gene expression of EPCAM, CD49f, CDH1 and KRTs for normal MEC lines; MES lines e.g. Vimentin, CD10, ACTA2 and MMP9; and ADSC lines e.g. CD105, CD90, CDH2 and CDH11. Compared to the mean of all four normal breast cell lines, both breast tumor cell lines demonstrated significantly lower ADSC marker gene expression, but higher expression of mesenchymal and invasion gene markers like SNAI1 and MMP2. When compared with four normal ADSC differentiated lineages, both tumor ADSC showed impaired osteogenic and chondrogenic but enhanced adipogenic differentiation and endothelial-like structures, possibly due to high PDGFRB and CD34. Addressing a functional role for overproduction of adipocytes, we initiated 3D-invasion studies including different cell types from the same patient. CM from ADSC differentiating into adipocytes induced tumor MEC 3D-invasion via EMT and amoeboid phenotypes. Normal MES breast cells adhered and proliferated on 3D-printed scaffolds containing 20 fibers, but not on 2.5D-printed scaffolds with single fiber layers, important for tissue engineering. Conclusion Expression analyses confirmed successful simultaneous cell isolations of three different phenotypes from normal and tumor primary breast tissues. Our cell culture studies support that breast-tumor environment differentially regulates tumor ADSC plasticity as well as cell invasion and demonstrates applications for regenerative medicine.}, language = {en} } @article{WagenbrennerHeinzHorasetal.2020, author = {Wagenbrenner, Mike and Heinz, Tizian and Horas, Konstantin and Jakuscheit, Axel and Arnholdt, J{\"o}rg and Hermann, Marietta and Rudert, Maximilian and Holzapfel, Boris M. and Steinert, Andre F. and Weißenberger, Manuel}, title = {The human arthritic hip joint is a source of mesenchymal stromal cells (MSCs) with extensive multipotent differentiation potential}, series = {BMC Musculoskeletal Disorders}, volume = {21}, journal = {BMC Musculoskeletal Disorders}, number = {1}, doi = {10.1186/s12891-020-03340-z}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-229497}, year = {2020}, abstract = {Background While multiple in vitro studies examined mesenchymal stromal cells (MSCs) derived from bone marrow or hyaline cartilage, there is little to no data about the presence of MSCs in the joint capsule or the ligamentum capitis femoris (LCF) of the hip joint. Therefore, this in vitro study examined the presence and differentiation potential of MSCs isolated from the bone marrow, arthritic hyaline cartilage, the LCF and full-thickness samples of the anterior joint capsule of the hip joint. Methods MSCs were isolated and multiplied in adherent monolayer cell cultures. Osteogenesis and adipogenesis were induced in monolayer cell cultures for 21 days using a differentiation medium containing specific growth factors, while chondrogenesis in the presence of TGF-ss1 was performed using pellet-culture for 27 days. Control cultures were maintained for comparison over the same duration of time. The differentiation process was analyzed using histological and immunohistochemical stainings as well as semiquantitative RT-PCR for measuring the mean expression levels of tissue-specific genes. Results This in vitro research showed that the isolated cells from all four donor tissues grew plastic-adherent and showed similar adipogenic and osteogenic differentiation capacity as proven by the histological detection of lipid droplets or deposits of extracellular calcium and collagen type I. After 27 days of chondrogenesis proteoglycans accumulated in the differentiated MSC-pellets from all donor tissues. Immunohistochemical staining revealed vast amounts of collagen type II in all differentiated MSC-pellets, except for those from the LCF. Interestingly, all differentiated MSCs still showed a clear increase in mean expression of adipogenic, osteogenic and chondrogenic marker genes. In addition, the examination of an exemplary selected donor sample revealed that cells from all four donor tissues were clearly positive for the surface markers CD44, CD73, CD90 and CD105 by flow cytometric analysis. Conclusions This study proved the presence of MSC-like cells in all four examined donor tissues of the hip joint. No significant differences were observed during osteogenic or adipogenic differentiation depending on the source of MSCs used. Further research is necessary to fully determine the tripotent differentiation potential of cells isolated from the LCF and capsule tissue of the hip joint.}, language = {en} } @phdthesis{Kessie2021, author = {Kessie, David Komla}, title = {Characterisation of Bordetella pertussis virulence mechanisms using engineered human airway tissue models}, doi = {10.25972/OPUS-23571}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-235717}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Pertussis is a highly contagious acute respiratory disease of humans which is mainly caused by the gram-negative obligate human pathogen Bordetella pertussis. Despite the availability and extensive use of vaccines, the disease persists and has shown periodic re-emergence resulting in an estimated 640,000 deaths worldwide in 2014. The pathogen expresses various virulence factors that enable it to modulate the host immune response, allowing it to colonise the ciliated airway mucosa. Many of these factors also directly interfere with host signal transduction systems, causing damage to the ciliated airway mucosa and increase mucous production. Of the many virulence factors of B. pertussis, only the tracheal cytotoxin (TCT) is able to recapitulate the pathophysiology of ciliated cell extrusion and blebbing in animal models and in human nasal biopsies. Furthermore, due to the lack of appropriate human models and donor materials, the role of bacterial virulence factors has been extrapolated from studies using animal models infected with either B. pertussis or with the closely related species B. bronchiseptica which naturally causes respiratory infections in these animals and produces many similar virulence factors. Thus, in the present work, in vitro airway mucosa models developed by co-culturing human airway epithelia cells and fibroblasts from the conduction zone of the respiratory tract on a decellularized porcine small intestine submucosa scaffold (SISser®) were used, since these models have a high correlation to native human conducting zone respiratory epithelia. The major aim was to use the engineered airway mucosa models to elucidate the contribution of B. pertussis TCT in the pathophysiology of the disease as well as the virulence mechanism of B. pertussis in general. TCT and lipopolysaccharide (LPS) either alone or in combination were observed to induce epithelial cell blebbing and necrosis in the in vitro airway mucosa model. Additionally, the toxins induced viscous hyper-mucous secretion and significantly disrupted barrier properties of the in vitro airway mucosa models. This work also sought to assess the invasion and intracellular survival of B. pertussis in the polarised epithelia, which has been critically discussed for many years in the literature. Infection of the models with B. pertussis showed that the bacteria can adhere to the models and invade the epithelial cells as early as 6 hours post inoculation. Invasion and intracellular survival assays indicated the bacteria could invade and persist intracellularly in the epithelial cells for up to 3 days. Due to the novelty of the in vitro airway mucosa models, this work also intended to establish a method for isolating individual cells for scRNA-seq after infection with B. pertussis. Cold dissociation with Bacillus licheniformis subtilisin A was found to be capable of dissociating the cells without inducing a strong fragmentation, a problem which occurs when collagenase and trypsin/EDTA are used. In summary, the present work showed that TCT acts possibly in conjunction with LPS to disrupt the human airway mucosa much like previously shown in the hamster tracheal ring models and thus appears to play an important role during the natural B. pertussis infection. Furthermore, we established a method for infecting and isolating infected cells from the airway mucosa models in order to further investigate the effect of B. pertussis infection on the different cell populations in the airway by single cell analytics in the future.}, subject = {Tissue engineering}, language = {en} } @phdthesis{Derakhshani2019, author = {Derakhshani, Shaghayegh}, title = {Measles virus infection enhances dendritic cell migration in a 3D environment}, doi = {10.25972/OPUS-18918}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-189182}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The respiratory system is amongst the most important compartments in the human body. Due to its connection to the external environment, it is one of the most common portals of pathogen entry. Airborne pathogens like measles virus (MV) carried in liquid droplets exhaled from the infected individuals via a cough or sneeze enter the body from the upper respiratory tract and travel down to the lower respiratory tract and reach the alveoli. There, pathogens are captured by the resident dendritic cells (DCs) or macrophages and brought to the lymph node where immune responses or, as in case of MV, dissemination via the hematopoietic cell compartment are initiated. Basic mechanisms governing MV exit from the respiratory tract, especially virus transmission from infected immune cells to the epithelial cells have not been fully addressed before. Considering the importance of these factors in the viral spread, a complex close-to-in-vivo 3D human respiratory tract model was generated. This model was established using de-cellularized porcine intestine tissue as a biological scaffold and H358 cells as targets for infection. The scaffold was embedded with fibroblast cells, and later on, an endothelial cell layer seeded at the basolateral side. This provided an environment resembling the respiratory tract where MV infected DCs had to transmigrate through the collagen scaffold and transmit the virus to epithelial cells in a Nectin-4 dependent manner. For viral transmission, the access of infected DCs to the recipient epithelial cells is an essential prerequisite and therefore, this important factor which is reflected by cell migration was analyzed in this 3D system. The enhanced motility of specifically MV-infected DCs in the 3D models was observed, which occurred independently of factors released from the other cell types in the models. Enhanced motility of infected DCs in 3D collagen matrices suggested infection-induced cytoskeletal remodeling, as also verified by detection of cytoskeletal polarization, uropod formation. This enforced migration was sensitive to ROCK inhibition revealing that MV infection induces an amoeboid migration mode in DCs. In support of this, the formation of podosome structures and filopodia, as well as their activity, were reduced in infected DCs and retained in their uninfected siblings. Differential migration modes of uninfected and infected DCs did not cause differential maturation, which was found to be identical for both populations. As an underlying mechanism driving this enforced migration, the role of sphingosine kinase (SphK) and sphingosine-1-phosphate (S1P) was studied in MV-exposed cultures. It was shown in this thesis that MV-infection increased S1P production, and this was identified as a contributing factor as inhibition sphingosine kinase activity abolished enforced migration of MV-infected DCs. These findings revealed that MV infection induces a fast push-and-squeeze amoeboid mode of migration, which is supported by SphK/S1P axis. However, this push-and-squeeze amoeboid migration mode did not prevent the transendothelial migration of MV-infected DCs. Altogether, this 3D system has been proven to be a suitable model to study specific parameters of mechanisms involved in infections in an in vivo-like conditions.}, subject = {Dendritische Zelle}, language = {en} } @phdthesis{Behets2018, author = {Behets, Jean Nicolas}, title = {Biomimetic calcium phosphate modification of 3D-printed tissue engineering scaffolds using reactive star-shaped macromers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-171728}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Biomimetic calcium phosphate (CaP) coatings imitate the trabecular bones surface structure and have shown to promote osteogenic differentiation in multipotent cells. The work of this thesis focused on the problem of former CaP coatings cracking and flaking off when being put on a bendable core structure like a 3D-printed poly (ε-caprolactone) (PCL) scaffold. The aim was to provide a chemical linkage between PCL and CaP using a star-shaped polymer (sPEG) and a phosphonate, 2-aminoethylphosphonic acid (2-AEP). First, a published CaP coating protocol was revised and investigated in terms of etching parameters for the PCL scaffold. Results presented reproducible thick coatings for all groups. The protocol was then broadened to include subsequent scaffold incubation in sPEG and 2-AEP solutions. Homogenous CaP coatings of decreased thickness presented themselves, proving feasibility. However, as is often found with physical CaP coating depositions, there were some irregular outcomes even during the same experimental group. A lower consumption of the chemical 2-AEP, for economic reasons, meant that the protocol was altered to simultaneously incubate scaffolds with sPEG and 2-AEP including preceding calculations for molar ratios. For ratios 1:1, 1:2 and 1:3, again a homogenous CaP coating was produced on most of the samples, although reproducibility issues maintained. However, the mechanical bending to induce surface cracking showed that the CaP did strongly bond to the sPEG/2-AEP, while the control CaP coating flaked off the surface in large pieces. This research demonstrates that chemically-bound CaP coatings resist flaking off the fiber surface. Future investigations should focus on the mechanisms of CaP crystallization, to improve reproducibility.}, subject = {Tissue engineering}, language = {en} }