@phdthesis{Sperlich2013,
  author    = {Sperlich, Andreas},
  title     = {Electron Paramagnetic Resonance Spectroscopy of Conjugated Polymers and Fullerenes for Organic Photovoltaics},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-81244},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {In the presented thesis, the various excited states encountered in conjugated organic semiconductors are investigated with respect to their utilization in organic thin-film solar cells. Most of these states are spin-baring and can therefore be addressed by means of magnetic resonance spectroscopy. The primary singlet excitation (spin 0), as well as positive and negative polaronic charge carriers (spin 1/2) are discussed. Additionally, triplet excitons (spin 1) and charge transfer complexes are examined, focussing on their differing spin-spin interaction strength. For the investigation of these spin-baring states especially methods of electron paramagnetic resonance (EPR) are best suited. Therefore according experimental methods were implemented in the course of this work to study conjugated polymers, fullerenes and their blends with continuous wave as well as time-resolved EPR and optically detected magnetic resonance.},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{ZitzlerKunkel2014,
  author    = {Zitzler-Kunkel, Andr{\´e}},
  title     = {Funktionale Merocyaninfarbstoffe: Synthese, molekulare und Selbstorganisationseigenschaften sowie ihre Anwendung in der organischen Photovoltaik},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-101536},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Analog zu den auf hochgeordneten Farbstoffarchitekturen in den biologischen Photosyntheseapparaten basierenden Energiekonversionssystemen sollte die exakte Einstellung zwischenmolekularer Wechselwirkungen auch in k{\"u}nstlichen Halbleitern eine entscheidende Rolle f{\"u}r die Weiterentwicklung organischer Elektronikmaterialien spielen. F{\"u}r eine derartige, pr{\"a}zise Steuerung der nanoskaligen Anordnung in organischen Materialien erscheinen Merocyaninfarbstoffe wegen ihrer hochgerichteten, dipolaren Aggregation {\"a}ußerst aussichtsreich. In diesem Zusammenhang war das Ziel der vorliegenden Arbeit die Ausnutzung funktionaler, stark selbstorganisierender Merocyanine, um eine gezielte Beeinflussung der Morphologie in der aktiven Schicht von BHJ-Solarzellen zu erreichen. Hierzu sollte zun{\"a}chst eine umfangreiche Serie komplexer Merocyanine synthetisiert und vollst{\"a}ndig charakterisiert werden. Im Folgenden wurde angestrebt, die optischen und elektrochemischen Eigenschaften der molekular gel{\"o}sten Farbstoffe zu bestimmen und f{\"u}r ausgew{\"a}hlte, geeignete Strukturen das Selbstorganisationsverhalten im Detail zu studieren. Zuletzt sollte durch eine sorgf{\"a}ltige Optimierung der Prozessierungsbedingungen ein Transfer der in L{\"o}sung gefundenen, supramolekularen Strukturen in den Blend l{\"o}sungsprozessierter BHJ-Solarzellen erreicht werden. Die organischen Elektronikbauteile wurden dabei im Arbeitskreis von Prof. Dr. Klaus Meerholz (Universit{\"a}t K{\"o}ln) gefertigt und charakterisiert. Zusammenfassend zeichnet die vorliegende Arbeit ein umfassendes Bild von der Synthese funktionaler Merocyanine, dem Studium ihrer molekularen und Selbstorganisationseigenschaften sowie ihrer Anwendung als p-Halbleitermaterialien in organischen Solarzellen. Der komplexe Molek{\"u}laufbau der dargestellten Farbstoffe f{\"u}hrte dabei zur Ausbildung verschiedener Farbstofforganisate, deren Struktur sowohl in L{\"o}sung als auch teilweise im Festk{\"o}rper aufgekl{\"a}rt werden konnte. Die erfolgreiche Implementierung von H-aggregierten Spezies der Verbindung 67b in die aktive Schicht organischer BHJ-Solarzellen resultierte in der Bildung effizienter Perkolationspfade f{\"u}r Exzitonen und freie Ladungstr{\"a}ger, wodurch diese Bauteile merklich h{\"o}here Stromdichten generieren konnten und gegen{\"u}ber Zellen ohne H-Spezies {\"u}ber 20 \% gesteigerte Effizienz aufwiesen. Diese Befunde verifizieren die postulierte Hypothese, dass eine gezielte Einstellung der zwischenmolekularen Wechselwirkungen bei organischen Halbleitern zu einer Optimierung der Funktionalit{\"a}t organischer Elektronikmaterialien beitragen kann.},
  subject      = {Merocyanine},
  language  = {de}
}
@phdthesis{Armer2023,
  author    = {Armer, Melina Brigitte Melanie},
  title     = {High-Quality Lead-Free Double Perovskite Single Crystals and their Optical Properties},
  doi       = {10.25972/OPUS-32750},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-327503},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {The presented thesis deals with the investigation of the characteristic physical properties of lead-free double perovskites. For this purpose lead-free double perovskite single crystals were grown from solution. In order to assess the influence of growth temperature on tail states in the material, the crystals were studied using Photoluminescence Excitation (PLE) and Transmission measurements. Additionally, lead-free double perovskite solar cells and thin films were investigated to address the correlation of precursor stoichiometry and solar cell efficiency. In a last step a new earth abundant lead-free double perovskite was introduced and its physical properties were studied by photoluminescene and absorptance. Like this it was possible to assess the suitability of this material for solar cell applications in the future.},
  subject      = {Perowskit},
  language  = {en}
}
@phdthesis{Rauh2013,
  author    = {Rauh, Daniel},
  title     = {Impact of Charge Carrier Density and Trap States on the Open Circuit Voltage and the Polaron Recombination in Organic Solar Cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-90083},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {The focus of this work is studying recombination mechanisms occurring in organic solar cells, as well as their impact on one of their most important parameters — the open circuit voltage Voc. Firstly, the relationship between Voc and the respective charge carrier density n in the active layer under open circuit conditions is analyzed. Therefor, a model after Shockley for the open circuit voltage is used, whose validity is proven with the aid of fits to the measured data. Thereby, it is emphasized that the equation is only valid under special conditions. In the used reference system P3HT:PC61BM the fits are in agreement with the measurement data only in the range of high temperatures (150 - 300 K), where Voc increases linearly with decreasing temperature. At lower temperatures (50 - 150 K), the experiment shows a saturation of Voc. This saturation cannot be explained with the model by the measured falling charge carrier density with decreasing temperatures. In this temperature range Voc is not directly related to the intrinsic properties of the active layer. Voc saturation is due to injection energy barriers at the contacts, which is ascertained by macroscopic simulations. Furthermore, it is observed that Voc in the case of saturation is equivalent to the so-called built-in potential. The difference between the built-in potential and the energy gap corresponds thereby to the sum of the energy barriers at both contacts. With the knowledge of the Voc(n) dependency for not contact limited solar cells, it is possible to investigate the recombination mechanisms of charge carriers in the active layer. For Langevin recombination the recombination rate is Rn2 (recombination order RO = 2), for Shockley-Read-Hall (SRH) Rn1 (RO=1); in various publications RO higher than two is reported with two main explanations. 1: Trap states for charge carriers exist in the respective separated phases, i.e. electrons in the acceptor phase and holes in the donor phase, which leads to a delayed recombination of the charge carriers at the interface of both phases and finally to an apparent recombination order higher than 2. 2: The enhanced R(n) dependency is attributed to the so called recombination prefactor, which again is dependent from n dependent mobility µ. It is shown that for the system P3HT:PC61BM at room temperature the µ(n) dependency does nearly completely explain the higher RO but not at lower temperatures which in this case supports the first explanation. In the material system PTB7:PC71BM the increased RO cannot be explained by the µ(n) dependency even at room temperature. To support the importance of trap states in combination with a phase separation for the explanation of the enhanced RO, additional trap states were incorporated in the solar cells to investigate their influence on the recombination mechanisms. To achieve this, P3HT:PC61BM solar cells were exposed to synthetic air (in the dark and under illumination) or TCNQ was added in small concentrations to the active layer which act as electron traps. For the oxygen degraded solar cell the recombination order is determined by a combination of open Voc-transients and Voc(n) measurements. Thereby, a continuous increase of the recombination order from 2.4 to more than 5 is observed with higher degradation times. By the evaluation of the ideality factor it can be shown that the impact of SRH recombination is increasing with higher trap concentration in relation to Langevin recombination. A similar picture is revealed for solar cells with TCNQ as extrinsic trap states. Finally, a phenomenon called s-shaped IV-curves is investigated, which can sometimes occur for solar cells under illumination. As course of this a reduced surface recombination velocity can be found. Experimentally, the solar cells were fabricated using a special plasma treatment of the ITO contact. The measured IV-curves of such solar cells are reproduced by macroscopic simulations, where the surface recombination velocity is reduced. Hereby, it has to be distinguished between the surface recombination of majority and minority charge carriers at the respective contacts. The theory can be experimentally confirmed by illumination level dependent IV-curves as well as short circuit current density and open circuit voltage transients.},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{Hegmann2017,
  author    = {Hegmann, Jan},
  title     = {Lichtstreuende Sol-Gel-Schichten f{\"u}r die Si- D{\"u}nnschichtphotovoltaik},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155815},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {Ziel dieser Arbeit war es, ein Schichtsystem auf Basis des Sol-Gel-Prozesses zu entwickeln, um Lighttrapping in Si-D{\"u}nnschichtsolarzellen zu erzeugen. Die Grundlage dieses Schichtsystems bilden SiO2-Partikel, die {\"u}ber den St{\"o}ber-Prozess hergestellt werden. Es zeigte sich, dass sich die Rauheit und der Haze der Schichten {\"u}ber die Partikelgr{\"o}ße und Schichtdicke einstellen lassen. Um die mechanische Stabilit{\"a}t der reinen St{\"o}ber-Schichten zu verbessern, kamen verschiedene Binder zum Einsatz. Beste Ergebnisse zeigten Binder basierend auf l{\"o}slichen Vorstufenpulvern, da diese dem St{\"o}ber-Sol beigemischt werden konnten und so Binder und Partikel gleichzeitig aufgebracht werden konnten. Auf diese Weise entstehen mechanisch stabile, lichtstreuende Schichten. Zum Einsatz kam zun{\"a}chst ein TiO2-Binder. Durch eine anschließende Gl{\"a}ttung der St{\"o}ber-TiO2-Streuschichten mit SiO2 entsteht eine defektfreie, aber dennoch raue Oberfl{\"a}che. Zus{\"a}tzlich wird ein betr{\"a}chtlicher Teil des Lichts in große Winkel gestreut. Es konnte gezeigt werden, dass sich auf den SiO2-gegl{\"a}tteten St{\"o}ber-TiO2-Streuschichten ZnO:Al deponieren l{\"a}sst, wobei die elektrischen Eigenschaften von der Dicke der Gl{\"a}ttung abh{\"a}ngen. Auch die elektrischen Eigenschaften der Si-D{\"u}nnschichtsolarzellen h{\"a}ngen von der Gl{\"a}ttung bzw. der Dicke der Gl{\"a}ttung ab. Dies gilt insbesondere f{\"u}r die von der Materialqualit{\"a}t abh{\"a}ngigen Parameter F{\"u}llfaktor FF und offen Klemmenspannung VOC. Insgesamt fallen die Parameter jedoch noch gegen{\"u}ber Referenzzellen auf ge{\"a}tztem Frontkontakt zur{\"u}ck. Vor allem aber wurde die hohe Zellreflexion aufgrund der Glas-TiO2-Grenzfl{\"a}che als prim{\"a}res Problem identifiziert. Dennoch konnte bei einer Gl{\"a}ttungsdicke von 200 nm sehr gutes Lighttrapping beobachtet werden. Verantwortlich hierf{\"u}r ist sehr wahrscheinlich die Großwinkelstreuung der St{\"o}ber-TiO2-Streuschichten. Um die Zellreflexion zu verringern, wurde der Brechungsindex des Binders und der Gl{\"a}ttungsschichten an den Stack aus Substrat, Streuschicht und ZnO:Al-Schicht angepasst. Idee war es, durch Einbringen eines Al2O3-Vorstufenpulvers eine niedrigbrechende Komponente bereitzustellen, um durch Mischung von Al2O3- und TiO2-Vorstufenpulver freie Hand {\"u}ber den Brechungsindex des Binders und der Gl{\"a}ttung zu erhalten. Da sich das Volumenverh{\"a}ltnis von SiO2-Partikeln zu Binder bei verschiedenen Al2O3-TiO2-Verh{\"a}ltnissen nur schwer bestimmen l{\"a}sst, wurde lediglich ein reiner Al2O3-Binder in den Streuschichten eingesetzt. Die Einstellung des Brechungsindex beschr{\"a}nkte sich allein auf die Gl{\"a}ttungsschichten. Um St{\"o}ber-Al2O3-Streuschichten mit hoher Rauigkeit und geringen Defekten zu erzielen, muss das Binder-zu-Partikel-Verh{\"a}ltnis angepasst werden. Beste Ergebnisse ergaben sich bei einem Al2O3-Gehalt von 2\% im Sol. Aufgrund der hohen Rauigkeit besitzen die Streuschichten einen hohen Haze und wegen des geringen Brechungsunterschied zwischen Glas und Binder eine hohe Transmission. Die Gl{\"a}ttung der Streuschichten im Al2O3-TiO2-System ist nur mit Hilfe einer zus{\"a}tzlichen SiO2-Gl{\"a}ttungsschicht und einer reduzierten Dicke auf 50 nm m{\"o}glich. Auf den reinen defektreichen Streuschichten tendieren die Al2O3-TiO2-Schichten selbst zu Rissbildung. Zur Untersuchung der ZnO:Al-Deposition wurde eine Gl{\"a}ttungsdicke von 200 nm gew{\"a}hlt. Die erwies sich als zu gering. Die aufgebrachten ZnO:Al-Schichten wiesen gr{\"o}ßere Poren und kleinere Oberfl{\"a}chendefekte auf. Die Anpassung des Brechungsindex der Gl{\"a}ttungsschichten an die ZnO:Al-Schicht erwies sich nicht als vorteilhaft. Die reine Al2O3-Gl{\"a}ttung zeigt auch nach der ZnO:Al-Deposition die h{\"o}chste Transmission. Die Winkelverteilung des Streulichts der St{\"o}ber-Al2O3-Streuschichten ist gegen{\"u}ber den St{\"o}ber-TiO2-Streuschichten zu kleineren Winkeln verschoben. Dennoch wird ein gr{\"o}ßerer Anteil des Lichts in große Winkel gestreut, als es bei der ge{\"a}tzten ZnO:Al-Referenz der Fall ist. Trotz der Defekte in den ZnO:Al-Schichten konnten auf den St{\"o}ber-Al2O3-Streuschichten funktionierende Tandemzellen hergestellt werden. Der F{\"u}llfaktor und die offene Klemmenspannung fallen nur geringf{\"u}gig hinter die der Referenzzelle zur{\"u}ck. In der Kurzschlussstromdichte machen sich die verringerte Zellreflexion und das sehr gute Lighttrapping bemerkbar, so dass das Niveau der Referenz erreicht werden konnte. Zu beachten ist allerdings, dass gerade im langwelligen Lighttrapping-Spektralbereich die gleiche EQE erreicht wurde, trotz immer noch leicht erh{\"o}hter Zellreflexion. Die letzte Versuchsreihe konnte zeigen, dass die entwickelten Schichten sich sehr gut zur Erzeugung von Lighttrapping in Si-D{\"u}nnschichtsolarzellen eignen.},
  subject      = {D{\"u}nnschichtsolarzelle},
  language  = {de}
}
@phdthesis{Wagenpfahl2013,
  author    = {Wagenpfahl, Alexander Johannes},
  title     = {Numerical simulations on limitations and optimization strategies of organic solar cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-90119},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {Continuously increasing energy prices have considerably influenced the cost of living over the last decades. At the same time increasingly extreme weather conditions, drought-filled summers as well as autumns and winters with heavier rainfall and worsening storms have been reported. These are possibly the harbingers of the expected approaching global climate change. Considering the depletability of fossil energy sources and a rising distrust in nuclear power, investigations into new and innovative renewable energy sources are necessary to prepare for the coming future. In addition to wind, hydro and biomass technologies, electricity generated by the direct conversion of incident sunlight is one of the most promising approaches. Since the syntheses and detailed studies of organic semiconducting polymers and fullerenes were intensified, a new kind of solar cell fabrication became conceivable. In addition to classical vacuum deposition techniques, organic cells were now also able to be processed from a solution, even on flexible substrates like plastic, fabric or paper. An organic solar cell represents a complex electrical device influenced for instance by light interference for charge carrier generation. Also charge carrier recombination and transport mechanisms are important to its performance. In accordance to Coulomb interaction, this results in a specific distribution of the charge carriers and the electric field, which finally yield the measured current-voltage characteristics. Changes of certain parameters result in a complex response in the investigated device due to interactions between the physical processes. Consequently, it is necessary to find a way to generally predict the response of such a device to temperature changes for example. In this work, a numerical, one-dimensional simulation has been developed based on the drift-diffusion equations for electrons, holes and excitons. The generation and recombination rates of the single species are defined according to a detailed balance approach. The Coulomb interaction between the single charge carriers is considered through the Poisson equation. An analytically non-solvable differential equation system is consequently set-up. With numerical approaches, valid solutions describing the macroscopic processes in organic solar cells can be found. An additional optical simulation is used to determine the spatially resolved charge carrier generation rates due to interference. Concepts regarding organic semiconductors and solar cells are introduced in the first part of this work. All chapters are based on previous ones and logically outline the basic physics, device architectures, models of charge carrier generation and recombination as well as the mathematic and numerical approaches to obtain valid simulation results. In the second part, the simulation is used to elaborate issues of current interest in organic solar cell research. This includes a basic understanding of how the open circuit voltage is generated and which processes limit its value. S-shaped current-voltage characteristics are explained assigning finite surface recombination velocities at metal electrodes piling-up local space charges. The power conversion efficiency is identified as a trade-off between charge carrier accumulation and charge extraction. This leads to an optimum of the power conversion efficiency at moderate to high charge carrier mobilities. Differences between recombination rates determined by different interpretations of identical experimental results are assigned to a spatially inhomogeneous recombination, relevant for almost all low mobility semiconductor devices.},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{Gorenflot2014,
  author    = {Gorenflot, Julien Fran{\c{c}}ois},
  title     = {Optical study of the excited states in the semiconducting polymer poly(3-hexylthiophene) for photovoltaic applications},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-116730},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {In the course of this dissertation, we have presented the interest of using spectroscopic methods to unravel the physics of polymer semiconductors in photovoltaic applications. Applying photoluminescence and photoinduced absorption spectroscopy to the reference system P3HT:PCBM has enabled us to study the major steps of photocurrent generation in organic bulk heterojunctions, from excitons generation to charges extraction and loss mechanisms and thus to improve the understanding of those mechanisms. The exciton binding energy, is the first obstacle to overcome for photocurrent generation in organic solar cell and the reason for the use of two materials, whose heterojunction act as a driving force for charge separation. We developed an original photoluminescence-detected field-induced exciton quenching method to investigate this energy. Absorption and photoluminescence spectra of pure P3HT show that, while both amorphous and crystalline domains participate in absorption, the energy is then transferred to the crystalline domains, from where the photoluminescence is exclusively originating. The field dependence of this photoluminescence showed that an energy of no less than 420 meV is necessary to split excitons into non photon-emitting species. Comparing those results with energy levels obtained by absorption and photoelectron spectroscopies, confirmed that the formation of those species is only a first step toward dissociation into free charges. Indeed, photoemission spectroscopy and the onset of photocurrent upon increasing the photon energy in a pure P3HT solar cell, concomitantly show that the energy level of a pair of free polarons is located 0.7 eV above the one of the exciton. The comprehensive analysis of those results originating from those different method enable us to draw a global picture of the states and energies involved in free polarons generation in pure material. This work has been widely acknowledged by the scientific community, published in Physical Review B in 2010 [1] and presented in national [2] and international [3] conferences. The spectroscopy of excited states is used to detect the presence of wanted species (charges) and potentially unwanted neutral species upon photoexcitation. As such, it offers us the possibility to qualify the efficiency of charge generation and, if any, identify the competing processes and the generation of unwanted species. In the frame of the European Marie Curie Research Network SolarNType,[4] this possibility was used - in combination with morphological, charge transport and devices characterizationsn - to study a number of new donor:acceptor blends. Thanks to those techniques, we were able to not only quantify the potential of those blends, but also to provide the chemist laboratories with a precious and detailed feedback on the strengths and weakness of the molecules, regarding charge generation, transport and extraction. The detailed study of terrylene-3,4:11,12-bis(dicarboximide) as electron acceptor for solar cells application was published in the peer review journal Synthetic Metals and was chosen to illustrate the cover page of the issue [5]. Finally, in the last chapter, we have used time resolved photoinduced absorption to improve the understanding of the charge carrier loss mechanisms in P3HT:PCBM active layers. This comprehension is of prime importance because, the fact that this recombination is far weaker than expected from the Langevin theory, enable polarons to travel further without recombining and thus to build thicker and more efficient devices. A comprehensive analysis of steady-state PIA spectra of pure P3HT, indicates that probing at 980 nm at a temperature between 140 and 250 K enables to monitor specifically polaron densities in both neat P3HT and P3HT:PCBM. Applying this finding to transient absorption enabled us to monitor, for the first time, the bimolecular recombination in pure P3HT, and to discover that - in sharp contrast with the blend - this recombination was in agreement with the Langevin theory. Moreover, it enables us to pinpoint the important role played by the existence of two materials and of energetical traps in the slow recombination and high recombination orders observed in the blend. This work has been published in the Journal of Applied Physics.[6] Those new insights in the photophysics of polymer:fullerene photoactive layers could have a strong impact on the future developement of those materials. Consistent measurements of the binding energy of excitons and intermediate species, would enable to clarify the role played by excess thermal energy in interfacial states dissociation. Better understanding of blends morphology and its influence on solar cells parameters and in particular on recombination could enable to reproduce the conditions of limited recombination on material systems offering some promising performances but with only limited active layer thicknesses. However, due to the number of parameters involved, further experimentation is required, before we can reach a quantitative modeling of bimolecular recombination. [1] Deibel et al., Phys. Rev. B, 81:085202, 2010 [2] Gorenflot et al., Deutsche Physikalische Gesellschaft Fr{\"u}hjahrstagung 2010, CPP20:10, Regensburg, Germany, 2010 [3] Gorenflot et al., International Conference of Synthetic Metals, 7Ax:05, Kyoto, Japan, 2010 [4] Marie-Curie RTN "SolarNTyp" Contract No. MRTN-CT-2006-035533 [5] Gorenflot et al., Synth. Met., 161(23{24):2669-2676, 2012 [6] Gorenflot et al., J. Appl. Phys., 115(14):144502, 2014},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{Mingebach2012,
  author    = {Mingebach, Markus Harald},
  title     = {Photocurrent in Organic Solar Cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73569},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2012},
  abstract  = {A quite new approach to low-cost mass production of flexible solar cells are organic photovoltaics. Even though the device efficiencies increased rapidly during the last years, further imporvements are essential for a successful market launch. One important factor influencing the device efficiency is the photocurrent of a solar cell, which is defined as the difference between the current under illumination and in the dark. In case of organic bulk heterojunction (BHJ) solar cells it is — in contrast to inorganic devices — dependent on the applied bias voltage. The voltage dependence results in a reduced fill factor and thus an even more pronounced influence of the photocurrent on the device efficiency. It is therefore crucial to understand the underlying processes determining the photocurrent in order to be able to further improve the solar cell performance. In a first step the photocurrent of P3HT:PC61BM devices was investigated by a pulsed measurement technique in order to prevent disturbing influences due to device heating under continous illumination. The resulting photocurrent was hyperbolic tangent like and featured a point symmetry, whose origin and meaning were discussed. In addition, the photocurrent was described by a combined model of Braun-Onsager and Sokel-Hughes theory for field dependent polaron pair dissociation and charge extraction, respectively. After this macroscopic view on the photocurrent, the focus of this work moves to the more basic processes determining the photocurrent: charge photogeneration and recombination. In a comparative study the field-dependence of these was investigated by time-delayed collection field (TDCF) measurements for two well-known reference systems, namely P3HT:PC61BM and MDMO-PPV:PC61BM. It was possible to identify two different dominating scenarios for the generation of free charge carriers. The first one — via a thermalized charge transfer state (CTS) — is clearly influenced by geminate recombination and therefore less efficient. In the second scenario, the free charge carriers are either generated directly or via an excited, "hot" CTS. In addition, clear differences in the nongeminate recombination dynamics of both material systems were found. Similar studies were also be presented with two modern low bandgap polymers which only differ by the bridging atom in the cyclopentadithiophene (PCPDTBT:PC71BM vs. Si-PCPDTBT:PC71BM). Such small changes in the chemical structure were already sufficient to affect the charge photogeneration as well as the morphology of the blend. These findings were set into relation to current-voltage characteristics in order to discuss the origin of the clear differences in the solar cell performance of both materials. Another crucial parameter limiting the solar cell efficiency is the builtin potential of a device. Within the range of semiconducting pn-junctions, Mott-Schottky analysis is an established method to determine the built-in potential. As it was originally derived for abrupt pn-junctions, its validity for organic BHJ solar cells — a bipolar, effective medium — was discussed. Experimental findings as well as the contradictions to Mott-Schottky theory indicated, that a direct transfer of this method to organic photovoltaics is not appropriate. Finally, the results obtained in the framework of the MOPS-project (Massengedruckte Organische Papier-Solarzellen) will be presented, in which the first completely roll-to-roll printed paper solar cells were realized.},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{Foertig2013,
  author    = {F{\"o}rtig, Alexander},
  title     = {Recombination Dynamics in Organic Solar Cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-83895},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {Neben herk{\"o}mmlichen, konventionellen anorganischen Solarzellen — haupts{\"a}chlich auf Silizium basierend — ist die Organische Photovoltaik (OPV) auf dem besten Wege in naher Zukunft eine kosteng{\"u}nstige, umweltfreundliche, komplement{\"a}re Technolgie darzustellen. Die Produktionskosten, die Lebenszeit der Solarzellen sowie deren Wirkungsgrad m{\"u}ssen dabei weiter optimiert werden, um einen Markteintritt der OPV zu erm{\"o}glichen. Die vorliegende Arbeit befasst sich mit der Effizienz organischer Solarzellen und deren Limitierung durch die Rekombination von Ladungstr{\"a}gern. Um funktionsf{\"a}hige Zellen zu untersuchen, werden zeitaufgel{\"o}ste Experimente wie die Messung der transienten Photospannung (TPV), des transienten Photostroms (TPC), die Ladungsextraktion (CE) sowie die time delayed collection field (TDCF) Methode angewandt. Untersucht werden sowohl fl{\"u}ssig prozessierte als auch aufgedampfte Proben, unterschiedliche Materialzusammensetzungen und verschiedene Probengeometrien. Das Standardmaterialsystem der OPV, P3HT:PC61BM, wird bei verschiedenen emperaturen und Beleuchtungsst{\"a}rken auf die Lebenszeit und Dichte der photogenerierten Ladungstr{\"a}ger {\"u}berpr{\"u}ft. F{\"u}r den Fall spannungsunabh{\"a}ngiger Generation von Ladungstr{\"a}gern zeigt sich die Anwendbarkeit der Shockley-Gleichung auf organische Solarzellen. Des Weiteren wird ein konsistentes Modell erl{\"a}utert, welches den Idealtit{\"a}tsfaktor direkt mit der Rekombination von freien mit gefangenen, exponentiell verteilten Ladungstr{\"a}gern verkn{\"u}pft. Ein Ansatz, bekannt unter der Bezeichung j=V Rekonstruktion, erm{\"o}glicht es, den leistungslimitierenden Verlustmechanismus in unbehandelten und thermisch geheizten P3HT:PC61BM Solarzellen zu identifizieren. Dieses Verf ahren, welches TPV, CE und TDCF Messungen beinhaltet, wird auf Proben basierend auf dem neuartigen, low-band gap Polymer PTB7 in Verbindung mit dem Fulleren PC71BM ausgeweitet. W{\"a}hrend in der Zelle hergestellt aus reinem Chlorbenzol betr{\"a}chtliche geminale wie nichtgeminale Verluste zu beobachten sind, erleichtert die Zugabe eines L{\"o}sungsmittelzusatzes die Polaronenpaartrennung, was zu einer starken Reduktion geminaler Verluste f{\"u}hrt. In einer Kooperation mit dem IMEC Institut in Leuven, werden abschließend die beiden bedeutensten Probenarchitekturen organischer Solarzellen, die planare und die Misch{\"u}bergang Struktur, jeweils basierend auf CuPC und C60, bez{\"u}glich nichtgeminaler Rekombination und Ladungstr{\"a}gerverteilung miteinander verglichen. Neben den beiden experimentellen Techniken um TPV und CE werden makroskopische Simulationen herangezogen, um den Ursprung unterschiedlichen Voc vs. Lichtintensit{\"a}t-Verhaltens zu erkl{\"a}ren.},
  subject      = {Organische Solarzelle},
  language  = {en}
}
@phdthesis{Dechant2022,
  author    = {Dechant, Moritz Thomas},
  title     = {Synthese und Struktur-Eigenschaftsbeziehungen neuer Phthalocyanin-Sternmesogene - Ein neues Design f{\"u}r organische, fl{\"u}ssigkristalline Photovoltaikmaterialien},
  doi       = {10.25972/OPUS-23888},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-238888},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Es wurde eine Vielzahl neuer, fl{\"u}ssigkristalliner Phthalocyanin-Sternmesogene synthetisiert. Die Struktur-Eigenschaftsbeziehungen und die thermotropen Eigenschaften neuer Phthalocyanin-Sternmesogene mit Freiraum sowie von sterisch {\"u}berfrachteten Verbindungen wurden insbesondere hinsichtlich der Freiraumf{\"u}llung untersucht. Diesbez{\"u}glich wurde ein neuer supramolekularer, freiraumf{\"u}llender "Klick-Prozess" zwischen einem Molek{\"u}l mit Freiraum und einem sterisch {\"u}berfrachteten Molek{\"u}l mit vier Fullerenen beobachtet. Die photophysikalischen Eigenschaften wurden zudem insbesondere im Hinblick auf die Anwendung f{\"u}r die Organische Photovoltaik untersucht.},
  subject      = {Phthalocyanin},
  language  = {de}
}