@article{KadeTandonWeichholdetal.2021,
  author    = {Kade, Juliane C. and Tandon, Biranche and Weichhold, Jan and Pisignano, Dario and Persano, Luana and Luxenhofer, Robert and Dalton, Paul D.},
  title     = {Melt electrowriting of poly(vinylidene fluoride-co-trifluoroethylene)},
  series = {Polymer International},
  volume    = {70},
  journal   = {Polymer International},
  number    = {12},
  doi       = {10.1002/pi.6272},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257654},
  pages     = {1725-1732},
  year      = {2021},
  abstract  = {Poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-co-TrFE)) is an electroactive polymer with growing interest for applications in biomedical materials and flexible electronics. In this study, a solvent-free additive manufacturing technique called melt electrowriting (MEW) has been utilized to fabricate well-defined microperiodic structures of the copolymer (P(VDF-co-TrFE)). MEW of the highly viscous polymer melt was initiated using a heated collector at temperatures above 120 °C and required remarkably slow collector speeds below 100 mm min\(^{-1}\). The fiber surface morphology was affected by the collector speed and an increase in β-phase was observed for scaffolds compared to the unprocessed powder. Videography shows vibrations of the P(VDF-co-TrFE) jet previously unseen during MEW, probably due to repeated charge buildup and discharge. Furthermore, piezo-force microscopy measurements demonstrated the electromechanical response of MEW-fabricated fibers. This research therefore achieves the melt electrohydrodynamic processing of fibers with micrometer resolution into defined structures with an important electroactive polymer.},
  language  = {en}
}
@article{BoehmStahlhutWeichholdetal.2022,
  author    = {B{\"o}hm, Christoph and Stahlhut, Philipp and Weichhold, Jan and Hrynevich, Andrei and Teßmar, J{\"o}rg and Dalton, Paul D.},
  title     = {The Multiweek Thermal Stability of Medical-Grade Poly(ε-caprolactone) During Melt Electrowriting},
  series = {Small},
  volume    = {18},
  journal   = {Small},
  number    = {3},
  doi       = {10.1002/smll.202104193},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257741},
  year      = {2022},
  abstract  = {Melt electrowriting (MEW) is a high-resolution additive manufacturing technology that places unique constraints on the processing of thermally degradable polymers. With a single nozzle, MEW operates at low throughput and in this study, medical-grade poly(ε-caprolactone) (PCL) is heated for 25 d at three different temperatures (75, 85, and 95 °C), collecting daily samples. There is an initial increase in the fiber diameter and decrease in the jet speed over the first 5 d, then the MEW process remains stable for the 75 and 85 °C groups. When the collector speed is fixed to a value at least 10\% above the jet speed, the diameter remains constant for 25 d at 75 °C and only increases with time for 85 and 95 °C. Fiber fusion at increased layer height is observed for 85 and 95 °C, while the surface morphology of single fibers remain similar for all temperatures. The properties of the prints are assessed with no observable changes in the degree of crystallinity or the Young's modulus, while the yield strength decreases in later phases only for 95 °C. After the initial 5-d period, the MEW processing of PCL at 75 °C is extraordinarily stable with overall fiber diameters averaging 13.5 ± 1.0 µm over the entire 25-d period.},
  language  = {en}
}