@phdthesis{Schoell2003,
  author    = {Sch{\"o}ll, Achim},
  title     = {High-resolution investigation of the electronic structure of organic thin films},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-10809},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2003},
  abstract  = {Die vorliegende Arbeit befasst sich mit der elektronischen Struktur organischer D{\"u}nnfilme. Eine zentrale Frage dabei ist der Einfluss der Wechselwirkung zwischen den Molek{\"u}len in der kondensierten Phase und der Wechselwirkung an metall-organischen Grenzfl{\"a}chen auf die elektronischen Eigenschaften. Dazu wurden die experimentellen Methoden Photoelektronenspektroskopie (PES) und R{\"o}ntgenabsorptionsspektroskopie (NEXAFS) mit h{\"o}chster Energieaufl{\"o}sung angewandt. Zus{\"a}tzlich wurden ab initio Rechnungen zur theoretischen Simulation von NEXAFS Spektren durchgef{\"u}hrt. Haupts{\"a}chlich wurden d{\"u}nne, vakuumsublimierte Filme aromatischer Modellmolek{\"u}le mit sauerstoffhaltigen funktionellen Gruppen (NTCDA, PTCDA, NDCA, BPDCA und ANQ) auf Ag(111) Oberfl{\"a}chen untersucht. Die ausgew{\"a}hlten Molek{\"u}le besitzen wegen ihrer großen delokalisierten p-Elektronensysteme sehr interessante Eigenschaften f{\"u}r die Anwendung in elektronischen Bauelementen. Dank der hohen Energieaufl{\"o}sung von Synchrotronstrahlungsquellen der dritten Generation war es erstmals m{\"o}glich, die Schwingungsfeinstruktur in den NEXAFS Spektren dieser kondensierten großen Molek{\"u}le sichtbar zu machen. Der Vergleich der Daten verschiedener Molek{\"u}le liefert dabei interessante Einblicke in den Kopplungmechanismus zwischen dem elektronischen {\"U}bergang und der Schwingungsanregung. Obwohl die Molek{\"u}le eine Vielzahl verschiedener Schwingungsmoden besitzen, kann man in deren NEXAFS Spektren beobachten, dass die elektronischen {\"U}berg{\"a}nge jeweils an haupts{\"a}chlich eine Schwingungsmode koppeln. Die hochaufgel{\"o}sten XPS Spektren der Molek{\"u}le NTCDA, PTCDA, NDCA, BPDCA und ANQ zeigen bestimmte systematische Unterschiede, so dass diese Spektren als Fingerabdruck f{\"u}r die jeweilige Substanz verwendet werden k{\"o}nnen. Durch die vergleichende Auswertung der Spektren konnten die 1s Bindungsenergien aller chemisch unterschiedlichen Kohlenstoff- und Sauerstoffatome bestimmt werden. Zus{\"a}tzliche Strukturen in den Spektren k{\"o}nnen shake-up Satelliten zugeschrieben werden. Die f{\"u}nf Molek{\"u}le stellen ein ideales Modellsystem dar, um fundamentale Aspekte der Rumpfelektronenspektroskopie zu untersuchen, wie Anfangs- und Endzustandseffekte und Satelliten, die durch die intramolekulare und intermolekulare Elektronendichteverteilung im Grund- und rumpfionisierten Zustand beeinflusst werden. Ein wichtiger Punkt dieser Dissertation sind spektroskopische Untersuchungen strukturell unterschiedlicher NTCDA Monolagenphasen auf Ag(111), deren Existenz aus vorangegangenen Arbeiten bekannt ist. Deutliche Unterschiede in der elektronischen Struktur der verschiedenen Phasen, die auf die Metall-Adsorbat Wechselwirkung zur{\"u}ckzuf{\"u}hren sind, konnten sowohl mittels XPS als auch mittels NEXAFS aufgezeigt werden. Sowohl f{\"u}r die komprimierte also auch f{\"u}r die relaxierte NTCDA Monolage kann die Bindung ans Substrat als schwach chemisorptiv charakterisiert werden, was eindeutig aus der Analyse der Satellitenstrukturen in den O 1s und C 1s XPS Spektren hervorgeht, die durch die dynamische Abschirmung durch Ladungstransfer vom Substrat erzeugt werden. Die NEXAFS Daten zeigen konsistent eine teilweise Besetzung des NTCDA LUMOs. Sowohl f{\"u}r die komprimierte als auch f{\"u}r die relaxierte NTCDA Monolage finden hochinteressante Phasen{\"u}berg{\"a}nge in ungeordnete Tieftemperaturphasen beim Abk{\"u}hlen auf 160 K statt. Dabei wird die Adsorbat-Substrat Wechselwirkung st{\"a}rker und das LUMO wird vollst{\"a}ndig besetzt. Dies kann in den NEXAFS Spektren anhand des Verschwindens der zugh{\"o}rigen {\"U}berg{\"a}nge beobachtet werden. Die XPS Spektren zeigen gleichzeitig eine deutliche Abnahme der Intensit{\"a}t schlecht abgeschirmter Photoemissionszust{\"a}nde, was auf die nun effektivere Ladungstransferabschirmung zur{\"u}ckzuf{\"u}hren ist. F{\"u}r den Phasen{\"u}bergang der relaxierten Monolage konnte mittels temperaturabh{\"a}ngiger NEXAFS Messungen eindeutig ein Hystereseverhalten gezeigt und die Hysteresekurve bestimmt werden. Die Hysterese betr{\"a}gt etwa 20 K. Des weiteren wurde aus SPA-LEED Messungen die Aktivierungsenergie f{\"u}r den Phasen{\"u}bergang der relaxierten Monolage beim Abk{\"u}hlen auf ca. 60 meV bestimmt. Schließlich wurden NEXAFS Untersuchungen an Poly{\"a}thylenproben mit verschiedenem Komonomergehalt durchgef{\"u}hrt. Unterschiede in den Absorptionsspektren von Proben mit unterschiedlichem Komonomeranteil konnten eindeutig auf die unterschiedliche Kristallinit{\"a}t der Proben zur{\"u}ckgef{\"u}hrt werden, indem eine hochkristalline Probe in situ bis zur Schmelztemperatur geheizt wurde. Ab initio Rechnungen an einer Modelmatrix aus Butanmolek{\"u}len zeigen, dass die Spektren von kristallinem und amorphem Poly{\"a}thylen aufgrund der intermolekularen Wechselwirkung deutliche Unterschiede haupts{\"a}chlich f{\"u}r Resonanzen mit starkem Rydberg Charakter aufweisen. Damit lassen sich die Unterschiede in den Poly{\"a}thylenspektren durch die {\"U}berlagerung der Signaturen der kristallinen und amorphen Anteile erkl{\"a}ren, die je nach Kristallinit{\"a}t der Probe in unterschiedlichen Verh{\"a}ltnissen vorliegen.},
  subject      = {D{\"u}nne Schicht},
  language  = {en}
}
@phdthesis{Scholz2013,
  author    = {Scholz, Markus},
  title     = {Energy-Dispersive NEXAFS: A Novel Tool for the Investigation of Intermolecular Interaction and Structural Phase Dynamics},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-83839},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {In the context of this thesis, the novel method soft X-ray energy-dispersive NEXAFS spectroscopy was explored and utilized to investigate intermolecular coupling and post-growth processes with a temporal resolution of seconds. 1,4,5,8- naphthalene tetracarboxylic acid dianhydride (NTCDA)multilayer films were the chosen model system for these investigations. The core hole-electron correlation in coherently coupled molecules was studied by means of energy-dispersive near-edge X-ray absorption fine-structure spectroscopy. A transient phase was found which exists during the transition between a disordered condensed phase and the bulk structure. This phase is characterized by distinct changes in the spectral line shape and energetic position of the X-ray absorption signal at the C K-edge. The findings were explained with the help of theoretical models based on the coupling of transition dipole moments, which are well established for optically excited systems. In consequence, the experimental results provides evidence for a core hole-electron pair delocalized over several molecules. Furthermore, the structure formation of NTCDA multilayer films on Ag(111) surfaces was investigated. With time-resolved and energy-dispersive NEXAFS experiments the intensity evolution in s- and p-polarization showed a very characteristic behavior. By combining these findings with the results of time-dependent photoemission measurements, several sub-processes were identified in the post- growth behavior. Upon annealing, the amorphous but preferentially flat-lying molecules flip into an upright orientation. After that follows a phase characterized by strong intermolecular coupling. Finally, three-dimensional islands are established. Employing the Kolmogorov-Johnson-Mehl-Avrami model, the activation energies of the sub-processes were determined.},
  subject      = {Organisches Molek{\"u}l},
  language  = {en}
}
@phdthesis{Scheiderer2019,
  author    = {Scheiderer, Philipp},
  title     = {Spectroscopy of Prototypical Thin Film Mott Materials},
  doi       = {10.25972/OPUS-18635},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-186358},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {The rich phase diagram of transition metal oxides essentially roots in the many body physics arising from strong Coulomb interactions within the underlying electron system. Understanding such electronic correlation effects remains challenging for modern solid state physics, therefore experimental data is required for further progress in the field. For this reason, spectroscopic investigations of prototypical correlated materials are the scope of this thesis. The experimental methods focus on photoelectron spectroscopy, and the test materials are the correlated metal SrVO\(_3\) and the Mott insulator LaTiO\(_3\), both of which are fabricated as high quality thin films. In SrVO\(_3\) thin films, a reduction of the film thickness induces a dimensional crossover from the metallic into the Mott insulating phase. In this thesis, an extrinsic chemical contribution from a surface over-oxidation is revealed that emerges additionally to the intrinsic change of the effective bandwidth usually identified to drive the transition. The two contributions are successfully disentangled by applying a capping layer that prevents the oxidation, allowing for a clean view on the dimensional crossover in fully stoichiometric samples. Indeed, these stoichiometric layers exhibit a higher critical thickness for the onset of the metallic phase than the bare and therefore over-oxidized thin films. For LaTiO\(_3\) thin films, the tendency to over-oxidize is even stronger. An uncontrolled oxygen diffusion from the substrate into the film is found to corrupt the electronic properties of LaTiO\(_3\) layers grown on SrTiO\(_3\). The Mott insulating phase is only detected in stoichiometric films fabricated on more suitable DyScO\(_3\) substrates. In turn, it is demonstrated that a \(controlled\) incorporation of excess oxygen ions by increasing the oxygen growth pressure is an effective way of \(p\) doping the material which is used to drive the band filling induced Mott transition. Gaining control of the oxygen stoichiometry in both materials allows for a systematic investigation of correlation effects in general and of the Mott transition in particular. The investigations are realized by various photoelectron spectroscopy techniques that provide a deep insight into the electronic structure. Resonant photoemission not only gives access to the titanium and vanadium related partial density of states of the valence band features, but also shows how the corresponding signal is enhanced by tuning the photon energy to the \(L\) absorption threshold. The enhanced intensity turns out to be very helpful for probing the Fermi surface topology and band dispersions by means of angular-resolved photoemission. The resulting momentum resolved electronic structure verifies central points of the theoretical description of the Mott transition, viz. the renormalization of the band width and a constant Luttinger volume in a correlated metal as the Mott phase is approached.},
  subject      = {{\"U}bergangsmetalloxide},
  language  = {en}
}
@phdthesis{Paul2010,
  author    = {Paul, Markus Christian},
  title     = {Molecular beam epitaxy and properties of magnetite thin films on semiconducting substrates},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56044},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {The present thesis is concerned with molecular beam epitaxy of magnetite (Fe3O4) thin films on semiconducting substrates and the characterization of their structural, chemical, electronic, and magnetic properties. Magnetite films could successfully be grown on ZnO substrates with high structural quality and atomically abrupt interfaces. The films are structurally almost completely relaxed exhibiting nearly the same in-plane and out-of-plane lattice constants as in the bulk material. Films are phase-pure and show only small deviations from the ideal stoichiometry at the surface and in some cases at the interface. Growth proceeds via wetting layer plus island mode and results in a domain structure of the films. Upon coalescence of growing islands twin-boundaries (rotational twinning) and anti-phase boundaries are formed. The overall magnetization is nearly bulk-like, but shows a slower approach to saturation, which can be ascribed to the reduced magnetization at anti-phase boundaries. However, the surface magnetization which was probed by x-ray magnetic circular dichroism was significantly decreased and is ascribed to a magnetically inactive layer at the surface. Such a reduced surface magnetization was also observed for films grown on InAs and GaAs. Magnetite could also be grown with nearly ideal iron-oxygen stoichiometry on InAs substrates. However, interfacial reactions of InAs with oxygen occur and result in arsenic oxides and indium enrichment. The grown films are of polycrystalline nature. For the fabrication of Fe3O4/GaAs films, a postoxidation of epitaxial Fe films on GaAs was applied. Growth proceeds by a transformation of the topmost Fe layers into magnetite. Depending on specific growth conditions, an Fe layer of different thickness remains at the interface. The structural properties are improved in comparison with films on InAs, and the resulting films are well oriented along [001] in growth direction. The magnetic properties are influenced by the presence of the Fe interface layer as well. The saturation magnetization is increased and the approach to saturation is faster than for films on the other substrates. We argue that this is connected to a decreased density of anti-phase boundaries because of the special growth method. Interface phases, viz. arsenic and gallium oxides, are quantified and different growth conditions are compared with respect to the interface composition.},
  subject      = {Molekularstrahlepitaxie},
  language  = {en}
}
@phdthesis{Li2015,
  author    = {Li, Han},
  title     = {Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123407},
  school      = {Universit{\"a}t W{\"u}rzburg},
  pages     = {159},
  year      = {2015},
  abstract  = {In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.},
  subject      = {Kohlenstoff-Nanor{\"o}hre},
  language  = {en}
}
@phdthesis{Krause2009,
  author    = {Krause, Stefan},
  title     = {Determination of the transport levels in thin films of organic semiconductors},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-40470},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2009},
  abstract  = {The approach of using the combination of Ultraviolet (UPS) and Inverse Photoemission (IPS) to determine the transport levels in thin films of organic semiconductors is the scope of this work. For this matter all influences on the peak position and width in Photoelectron Spectroscopy are discussed with a special focus on organic semiconductors. Many of these influences are shown with experimental results of the investigation of diindenoperylene on Ag(111). These findings are applied to inorganic semiconductors silicon in order to establish the use of UPS and IPS on a well-understood system. Finally, the method is used to determine the transport level of several organic semiconductors (PTCDA, Alq3, CuPc, DIP, PBI-H4) and the corresponding exciton binding energies are calculated by comparison to optical absorption data.},
  subject      = {Organischer Halbleiter},
  language  = {en}
}
@phdthesis{Haeming2010,
  author    = {H{\"a}ming, Marc},
  title     = {Electronic Many-Body Effects in organic Thin-Films and Interfaces},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55494},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {The results of this thesis contribute to the understanding of the electronic properties of organic thin-films and interfaces. It is demonstrated that photoemission spectroscopy is very useful for studying surfaces and interfaces. Additionally it is shown, that many-body effects can be relevant for organic thin films, in particular at interfaces with strong interaction. These effects can have general implications for the material properties. In the first part of this thesis a systematic series of polyacene molecules is investigated with NEXAFS spectroscopy. The comparison of the data with core level and IPES data indicates that core excitations and core excitons need to be understood as many-body excitations. This finding implies for example that a high exciton binding energy is not necessarily associated with strong localization of the excited electron at the hole. As these effects apply also for valence excitons they can be relevant for the separation of charges and for the electron-hole recombination at interfaces. In the next chapter some fundamental effects in organic multilayer films and at organic-metal interfaces are studied with core level and NEXAFS spectroscopy. In this context a series of selected molecules is investigated, namely BTCDA, BTCDI, PTCDA and PTCDI. It is shown that in case of strong interface interaction a density of adsorbate-substrate states is formed which can lead to significant charge transfer satellites in the PES and NEXAFS spectra, similar to what is known for transition metal compounds. Moreover, it is demonstrated that the data can be modeled qualitatively by a basic approach which fuses the single impurity Anderson model with the description of charge transfer satellites by Sawatzky et al. This approach, which is equivalent to that of Gunnarsson and Sch{\"o}nhammer, allows even a relatively simple semi-quantitative analysis of the experimental data. The comparison of different adsorbate layers indicates that these many-body effects are particularly strong in case of partial occupation of the LUMO derived DOS. In the third part an organic multilayer film (SnPc), an organic-metal interface with strong coupling (SnPc/Ag) and an organic-organic interface (SnPc/PTCDA/Ag) are studied exemplarily with resonant Auger spectroscopy. The comparison of the data gives evidence for the contribution of many-body effects to the autoionization spectra. Furthermore, it is found that the electron-vibration coupling and the substrate-adsorbate charge transfer occurs on the time scale of the core hole life time. Moreover, the interaction at the organic-organic interface is weak, comparable to the intermolecular interaction in the multilayer films, despite a considerable rigid level shift for the SnPc layer. Furthermore, weak but significant electron-electron correlation is found for the molecular frontier orbitals, which are important for the substrate-adsorbate charge transfer. Therefore, these strongly coupled adsorbate films are briefly discussed within the context of the Hubbard model in the last part of this thesis. From the data derived in this work it can be estimated that such monolayer films are in the regime of medium correlations. Consequently one can expect for these adsorbate films properties which are related to the extraordinary behavior of strongly correlated materials, for which Mott metal-insulator transitions, sophisticated magnetic properties and superconductivity can be observed. Additionally some results from the investigation of alkyl/Si self-assembled monolayers are briefly discussed in the appendix. It is demonstrated exemplarily for the alkyl chains that the electronic band structure of short, finitely repeating units can be well modeled by a comparatively simple quantum well approach. In principle this approach can also be applied to higher dimensional systems, which makes it very useful for the description of E(k) relations in the regime of repeating units of intermediate length. Furthermore, the photoelectron and NEXAFS spectra indicate strong interaction at the alkyl/Si interface. It was found that the interface states can be modified by moderate x-ray irradiation, which changes the properties for charge transport through the SAM.},
  subject      = {Organischer Stoff},
  language  = {en}
}
@phdthesis{Holch2009,
  author    = {Holch, Florian},
  title     = {Investigation of Intermolecular Interaction in Organic Thin Films by means of NEXAFS Spectroscopy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-43630},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2009},
  abstract  = {The present work reports on the electron-vibron coupling in large organic molecules and particularly on the intermolecular interaction in molecular condensates. The optical and electrical properties of these organic systems are in the focus of attention due to their crucial importance for the development of (hybrid) organic electronic devices. In particular, the charge transport mechanism and hence the interaction between condensed molecules is a matter of debate [1-4]. In order to shed light on this interaction, the spectroscopic signatures of isolated molecules in the gas phase and their condensed counterparts have been studied. The applied technique, near-edge x-ray absorption fine structure (NEXAFS) spectroscopy, is a local probe with high chemical selectivity, well suited for the investigation of the electronic structure of molecular valence levels [5]. In the experimental part, the experimental set-up developed in this work is described with special attention to the characteristic issues of gas phase measurements, energy calibration and the subsequent data evaluation. The high quality gas phase and solid state NEXAFS spectra are analysed with respect to energy positions, shape and intensity of the sharp pi*-resonances characteristic for these aromatic molecules. Where applicable, a detailed Franck-Condon (FC) analysis of the vibronic fine structure has been performed, yielding additional information on the changes that occur upon solid state formation. Together with former results on vibrational features in large organic molecules, this information has been used to investigate the correlation of vibrational energies in the ground and electronically excited state. We find a relatively good agreement with other empirical studies on vibronic structures in photoelectron spectroscopy (PES) spectra of small molecules [6]. The molecular compounds investigated are in general believed to interact via weak van-der-Waals forces only. The present results however reveal distinct differences between the spectra of the gas and solid phase that can not be explained within the context of a mere interaction by dispersive forces. In detail, differential red-shifts of 0.1 to 0.3eV of transitions assigned to the aromatic system have been observed in the C-K spectra of benzene-tetracarboxylic acid dianhydride (BTCDA), 1,4,5,8-naphthalene-tetracarboxylic acid dianhydride (NTCDA), and 3,4,9,10-perylene-tetracarboxylic acid dianhydride (PTCDA) upon solid state formation. From BTCDA to PTCDA the shift increases, indicating an improving intermolecular interaction with molecular size or a closer molecular packing. In contrast, all transitions assigned to the anhydride carbon atom (C1) do not show any shift. For the O-K spectra, small changes in relative intensity have been observed for BTCDA and NTCDA. In case of PTCDA, a blue-shift of up to 0.2eV is evident for the OB 1sLEMO+1 transition. Theoretical models for the intermolecular interaction have been proposed in this work, based on a change of molecular geometry and interaction of adjacent molecules in the ground and excited state, respectively. While an interaction of adjacent molecular orbitals may explain the experimental findings for one particular molecule, this model falls short for a comprehensive explanation of all three dianhydrides. For an interaction in the excited state, the excitonic coupling with the neighbours attached at an angle, quantum chemical calculations yield no significant change in peak positions for NTCDA. Unfortunately, results for the stacked neighbours as well as the larger compound PTCDA are still lacking. For tris (8-quinolinol) aluminum (Alq3), the observed peak-shifts are restricted to just one unoccupied orbital, the LEMO+2, which is mainly localised at the phenoxide side of the quinolinol ligands. Although the shifts differ for the individual edges, the main interaction can therefore be assigned to this orbital. In summary, NEXAFS spectroscopy, if performed with great care in terms of experimental details and data analysis especially for the gas phase data, provides very detailed and highly interesting data on the changes of the electronic structure of organic molecules upon condensation. The present data can be applied as a reference for further experimental and (highly desired) theoretical investigations, which are needed for a comprehensive understanding of the complex interaction mechanisms between organic molecules.},
  subject      = {Organisches Molek{\"u}l},
  language  = {en}
}
@phdthesis{ElKareh2014,
  author    = {El-Kareh, Lydia},
  title     = {Rashba-type spin-split surface states: Heavy post transition metals on Ag(111)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-112722},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {In the framework of this thesis, the structural and electronic properties of bismuth and lead deposited on Ag(111) have been investigated by means of low-temperature scanning tunneling microscopy (LT-STM) and spectroscopy (STS). Prior to spectroscopic investigations the growth characteristics have been investigated by means of STM and low energy electron diffraction (LEED) measurements. Submonolayer coverages as well as thick films have been investigated for both systems. Subsequently the quantum well characteristics of thick Pb films on Ag(111) have been analyzed and the quantum well character could be proved up to layer thicknesses of N ≈ 100 ML. The observed characteristics in STS spectra were explained by a simple cosine Taylor expansion and an in-plane energy dispersion could be detected by means of quasi-particle interferences. The main part of this work investigates the giant Rashba-type spin-split surface alloys of (√3 × √3)Pb/Ag(111)R30◦ and (√3 × √3)Bi/Ag(111)R30◦. With STS experiments the band positions and splitting strengths of the unoccupied (√3 × √3)Pb/Ag(111)R30◦ band dispersions could be resolved, which were unclear so far. The investigation by means of quasi-particle interferences resulted in the observation of several scattering events, which could be assigned as intra- and inter-band transitions. The analysis of scattering channels within a simple spin-conservation-approach turned out to be incomplete and led to contradictions between experiment and theory. In this framework more sophisticated DFT calculations could resolve the apparent deviations by a complete treatment of scattering in spin-orbit-coupled materials, which allows for constructive interferences in spin-flip scattering processes as long as the total momentum J_ is conserved. In a similar way the band dispersion of (√3 × √3)Bi/Ag(111)R30◦ was investigated. The STS spectra confirmed a hybridization gap opening between both Rashba-split bands and several intra- and inter-band scattering events could be observed in the complete energy range. The analysis within a spin-conservation-approach again turned out to be insufficient for explaining the observed scattering events in spin-orbit-coupled materials, which was confi by DFT calculations. Within these calculations an inter-band scattering event that has been identified as spin-conserving in the simple model could be assigned as a spin-flip scattering channel. This illustrates evidently how an incomplete description can lead to completely different indications. The present work shows that different spectroscopic STM modes are able to shed light on Rashba-split surface states. Whereas STS allowed to determine band onsets and splitting strengths, quasi-particle interferences could shed light on the band dispersions. A very important finding of this work is that spin-flip scattering events may result in constructive interferences, an eff which has so far been overlooked in related publications. Additionally it has been found that STM measurements can not distinguish between spin-conserving scattering events or spin-flip scattering events, which prevents to give a definite conclusion on the spin polarization for systems with mixed orbital symmetries just from the observed scattering events.},
  subject      = {Silber},
  language  = {en}
}
@phdthesis{Constantino2013,
  author    = {Constantino, Jennifer Anne},
  title     = {Characterization of Novel Magnetic Materials: Ultra-Thin (Ga,Mn)As and Epitaxial-Growth MnSi Thin Films},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-90578},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {The study of magnetic phases in spintronic materials is crucial to both our fundamental understanding of magnetic interactions and for finding new effects for future applications. In this thesis, we study the basic electrical and magnetic transport properties of both epitaxially-grown MnSi thin films, a helimagnetic metal only starting to be developed within our group, and parabolic-doped ultra-thin (Ga,Mn)As layers for future studies and applications.},
  subject      = {Galliumarsenid},
  language  = {en}
}