@phdthesis{Dobrawa2004, author = {Dobrawa, Rainer Anton}, title = {Synthesis and characterization of terpyridine-based fluorescent coordination polymers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-10367}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Complexation properties of 2,2':6',2''-terpyridine (tpy) have been studied with a series of first row transition metal ions by UV-vis, 1H NMR and isothermal titration calorimetry and ƒ´H values for the tpy complexation processes have been determined. These studies reveal that Zn2+ is the best suited metal ion for the reversible coordination of the terpyridine ligand. Thus, supramolecular coordination polymerization of perylene bisimide fluorophores containing terpyridine functionalities have been investigated by using Zn2+ as metal ion. The formation of the dimeric complexes in the case of monotopic model comounds and coordination polymerization of ditopic functional building blocks have been confirmed by 1H NMR studies. The optical properties of dimeric and polymeric complexes have been investigated by UV-vis and fluorescence spectroscopy. The Zn2+ coordination to the terpyridine unit does not effect the advantageous fluorescence properties of perylene bisimide moieties. The reversibility of the formation of coordination polymers has been established by 1H NMR and additionally by DOSY NMR and fluorescence anisotropy measurements. Coordination polymer strands can be visualized by atomic force microscopy (AFM), which also reveals the formation of an ordered monolayer film at higher concentration. The average polymer length has been determined by AFM to 15 repeat units, which correlates well with the value estimated by 1H NMR to >10 repeat units.}, subject = {Terpyridinderivate <2}, language = {en} } @phdthesis{Nikolaev2005, author = {Nikolaev, Viacheslav}, title = {Development and application of fluorescent cAMP und cGMP biosensors}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15673}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {The cyclic nucleotides cAMP and cGMP are two ubiquitous important second messengers, which regulate diverse physiological responses from vision and memory to blood pressure and thrombus formation. They act in cells via cAMP- and cGMP-dependent protein kinases (PKA and GK), cyclic nucleotide-gated channels and Epac. Although the concept of cyclic nucleotide signalling is well developed based on classical biochemical studies, these techniques have not allowed to analyze cAMP and cGMP in live cells with high temporal and spatial resolution. In the present study fluorescence resonance energy transfer was used to develop a technique for visualization of cAMP and cGMP in live cells and in vitro by means of fluorescent biosensors. Ligand-induced conformational change in a single nucleotide-binding domain flanked with green fluorescent protein mutants was used for dynamic, highly sensitive measurements of cAMP and cGMP. Such biosensors retained binding properties and chemical specificity of unmodified domains, allowing to image cyclic nucleotides in a physiologically relevant range of concentrations. To develop cAMP-sensors, binding domains of PKA, Epac and cAMP-gated HCN-channel were used. cGMP-sensors were based on single domains of GK and phosphodiesterases (PDEs). Sensors based on Epac were used to analyze spatio-temporal dynamics of cAMP in neurons and macrophages, demonstrating that cAMP-gradients travel with a high speed (~ 40 \&\#956;m/s) throughout the entire cytosol. To understand the mechanisms of cAMP-compartmentation, kinetics properties of phosphodi-esterase (PDE2) were, next, analyzed in aldosterone producing cells. PDE2 is able to rapidly hydrolyze extensive amounts of cAMP, so that the speed of cAMP-hydrolysis is much faster than that of its synthesis, which might serve as a basis of compartmentation. cAMP-sensors were also used to develop a clinically relevant diagnostic method for reliable detection of \&\#946;1-adrenergic receptor autoantibodies in cardiac myopathy patients, which has allowed to significantly increase the sensitivity of previously developed diagnostic approaches. Conformational change in a single binding domain of GK and PDE was, next, used to create novel fluorescent biosensors for cGMP. These sensors demonstrated high spatio-temporal resolution and were applied to analyze rapid dynamics of cGMP production by soluble and particulate guanylyl cyclases as well as to image cGMP in mesangial cells. In summary, highly sensitive biosensors for cAMP and cGMP based on single cyclic nucleotide-binding domains have been developed and used in various biological and clinically relevant applications.}, subject = {Cyclo-AMP}, language = {en} } @phdthesis{Stahl2005, author = {Stahl, Rainer}, title = {Electroactive Conjugated Polymers as Charge-Transport Materials for Optoelectronic Thin-Film Devices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-16980}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {In this work the electrochemical and spectroelectrochemical properties of a series of pi-conjugated organic polymers were studied. The polymers were deposited on platinum electrodes or ITO-coated glass substrates by potentiodynamic electro-polymerisation of the corresponding monomeric precursor molecules. The electro-chemical and photophysical properties of the triarylborane monomers were studied in detail in order to estimate possible influences on the behaviour of the corresponding polymer. The first part of this work aimed at the synthesis and investigation of conjugated donor-acceptor polymers which combine the prerequisites of an OLED within one material: the transport of positive and negative charges and the formation of emissive excited states. With the carbazole-substituted oxadiazoles 1-3 it was shown that on the one hand the carbazole functionality is suitable for enabling the electrochemical polymerisation of the monomers and on the other hand it facilitates reversible p-doping of the resultant polymers. Although n-doping of poly-1-poly-3 is possible due to the electron-deficient oxadiazole rings, it causes the continuous degradation of these electron-acceptor units. Interestingly, this process does not influence the capability of p-doping of the polymers. With respect to its electrochemical and spectroelectrochemical properties the behaviour of the borane polymer poly-4 is absolutely identical with that of the oxadiazole polymers. Moreover, the optical excitation of poly-4 in the solid state leads to the emission of blue-green light which suggests that this polymer might also possess electroluminescent properties. AFM-measurements of poly-4 films on ITO-coated glass substrates revealed, that the film thickness can be controlled to a certain extent by the number of polymerisation redox cycles. It was shown from the electrochemical and photophysical properties of the triarylboranes 4-6 that the pi-pi-interaction between boron and nitrogen atoms is comparably weak in these molecules. This leads to an unexpected ground-state polarisation with a partially positive boron atom and a partially negative nitrogen atom. Moreover, it was found that TAB 4 possesses a lower symmetry than D3 in solution and that excitation energy can be transferred amongst the three subchromophores of 4. By titration experiments it was also demonstrated that TAB 4 can reversibly bind fluoride ions and that the binding event significantly influences the optical absorption characteristics of the chromophore. It can be assumed, that the above mentioned properties, which have a profound influence on the photophysical behaviour of these triarylborane chromophores, also determine the behaviour of the corresponding polymer in a solid state environment. The aim of the second part of this work was the investigation of purely n-conducting materials based on electron-deficient borane and viologen polymers. The corresponding precursor molecules should be polymerised on platinum electrodes by reductive electropolymerisation. However, a reductive polymerisation was not possible for the borane monomer 19 which is thought to be due to a strong localisation of the unpaired electron on the central boron atom of the radical anion. An electropolymerisation of the cyano-substituted bispyridinio-compound 17 failed because of the poor quality of CN- as a leaving group. Thus, a synthesis of the analogous isomer 18 was developed, in which the cyano-substituents were exchanged by the better leaving group Cl-. The viologen polymer poly-18, which can be regarded as an electron-deficient iso-electronic analogue of poly(para-phenylene), was successfully deposited on a platinum electrode by reductive electropolymerisation of 18. Poly-18 can be reversibly n-doped at comparably low potentials; however, at higher potentials the polymer is overcharged and destroyed irreversibly. As the synthetic strategy for 18 allows the variation of both spacer unit and leaving group in the last two steps of the reaction sequence, a series of analogous compounds can be easily synthesised using this route.}, subject = {Polymerhalbleiter}, language = {en} } @phdthesis{Stepanenko2008, author = {Stepanenko, Vladimir}, title = {Self-Assembly of Bay-Substituted Perylene Bisimide by Ligand-Metal Ion Coordination}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-32063}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {The subject of this thesis is the synthesis and characterization of PBI-based fluorescent metallosupramolecular polymers and cyclic arrays. Terpyridine receptor functionalized PBIs of predesigned geometry have been used as building blocks to construct desired macromolecular structures through metal-ion-directed self-assembly. These metallosupramolecular architectures have been investigated by NMR, UV/Vis and fluorescence spectroscopy, mass spectrometry, and atomic force microscopy.}, subject = {Supramolekulare Chemie}, language = {en} } @misc{Fronczek2009, type = {Master Thesis}, author = {Fronczek, David Norman}, title = {Integration of fluorescence and atomic force microscopy for single molecule studies of protein complexes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-70731}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {The scope of this work is to develop a novel single-molecule imaging technique by combining atomic force microscopy (AFM) and optical fluorescence microscopy. The technique is used for characterizing the structural properties of multi-protein complexes. The high-resolution fluorescence microscopy and AFM are combined (FIONA-AFM) to allow for the identification of individual proteins in such complexes. This is achieved by labeling single proteins with fluorescent dyes and determining the positions of these fluorophores with high precision in an optical image. The same area of the sample is subsequently scanned by AFM. Finally, the two images are aligned and the positions of the fluorophores are displayed on top of the topographical data. Using quantum dots as fiducial markers in addition to fluorescently labeled proteins, fluorescence and AFM information can be aligned with an accuracy better than 10 nm, which is sufficient to identify single fluorescently labeled proteins in most multi-protein complexes. The limitations of localization precision and accuracy in fluorescence and AFM images are investigated, including their effects on the overall registration accuracy of FIONA-AFM hybrid images. This combination of the two complementary techniques opens a wide spectrum of possible applications to the study of protein interactions, because AFM can yield high resolution (5-10 nm) information about the conformational properties of multi-protein complexes while the fluorescence can indicate spatial relationships of the proteins within the complexes. Additionally, computer simulations are performed in order to validate the accuracy of the registration algorithm.}, subject = {Kraftmikroskopie}, language = {en} } @phdthesis{Reitzenstein2010, author = {Reitzenstein, D{\"o}rte}, title = {Donor-Acceptor Conjugated Polymers for Application in Organic Electronic Devices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-53939}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {In the first part of the work three polycarbazoles poly[N-((4-dimesitylboryl)-3,5-dimethylphenyl)-carbazole]-2,7-diyl P1, poly[N-((4-dimesitylboryl)-3,5-dimethylphenyl)-carbazole]-3,6-diyl P2 and poly[N-(4-(diphenylmethylene)-phenyl)- carbazole]-2,7-diyl P3 were synthesized by Yamamoto coupling reaction and their spectroscopic and electrochemical properties were investigated. Absorption and fluorescence characteristics of P1 and P3 were found to be similar to other 2,7-linked polycarbazoles, whereas P2 shows a CT absorption band arising from a shift of electron density from the nitrogen of the carbazole donor to the triarylborane acceptor. This causes a negative solvatochromic absorption and a positive solvatochromic fluorescence behaviour and is responsible for the significantly enlarged fluorescence quantum efficiency in solution and solid state compared to other 3,6-linked polycarbazoles. Thus the spectroscopic properties are governed by the connection pattern: the 2,7-linked polycarbazoles are not affected by the acceptor substituent due to the rigid poly-para-phenylene-like backbone structure, whereas the 3,6-linked polycarbazole P2 is dominated by the properties of the monomer unit due to its more flexible (less conjugated) structure. The oxidative processes of P1-P3 have been investigated in detail by cyclic voltammetry, which are similar to known 2,7- and 3,6-polycarbazoles. The reversible reduction found for P1 and P2, respectively, is attributed to the reduction of the triarylborane moiety. No reduction process referring to the carbazole moiety was observed. Due to its better solubility compared to P1 and P3 only P2 was used as active layer in an OLED device (ITO/P2/Al). The electroluminescence spectrum revealed CIE coordinates of (0.17, 0.21). In the second part of the work the low band gap polyradical poly{[((2,3,4,5,6-pentachlorophenyl)-bis(2,3,5,6-tetrachlorophenyl)methyl radical)-4,4'-diyl]-alt-4,4'-bis(vinylphenyl)-4-(2-ethylhexyloxy)phenylamin} P4 was synthesized by Horner-Emmons reaction. It shows an IV-CT band in the NIR, which arises from an ET from the triarylamine donor to the PCTM radical acceptor. This transition is confined to one monomer unit as deduced from comparison with the monomer spectra. HOMO and LUMO of P4 determined by cyclic voltammetry are at -5.5 and -4.5 eV, respectively. The smaller electrochemical band gap (1.0 eV) compared to the optical band gap (1.2 eV) is probably caused by ion pairing effects in the electrochemical experiments and indicates a low exciton binding energy. Femtosecond-pump-probe transient absorption spectroscopy revealed the spectral features of the oxidized triarylamine donor and the reduced PCTM acceptor similar to the spectra obtained separately for positive and negative potentials by spectroelectrochemistry. Thus the ET event causing the IV-CT absorption band could unambiguously be identified. The decay of the IV-CT state was found to be biexponential. The fast solvent dependent decay component is ascribed to the direct decay from the IV-CT state to the ground state, whereas the slow solvent independent decay component is tentatively attributed to an equilibrium formation of the IV-CT state and a completely charge separated state formed by charge migration along the polymer backbone. Well balanced ambipolar charge transport with hole and electron mobilities of ca. 3 × 10-5 cm2 V-1 s-1 was found in OFET devices (BG/TC structure) comprising an additional insulating organic PPcB layer. Polymer/polymer BHJ solar cell devices with the structure glass/ITO/PEDOT:PSS/(P3HT/P4)/Ca/Al yielded a power conversion efficiency of 3.1 × 10-3 \%, VOC = 0.38 V, JSC = 2.8 × 10-2 mA cm-2 and FF = 0.29 for the 1:4 (P3HT/P4) blend ratio. The improper solid state morphology of P4 that causes the unsatisfying performance of OFET and solar cell devices renders P4 less suitable for these applications, whereas the hypothesis of charge migration in the excited state is worth to be investigated in more detail.}, subject = {Carbazolderivate}, language = {en} } @phdthesis{Berberich2012, author = {Berberich, Martin}, title = {Rylene Bisimide-Diarylethene Photochromic Systems for Non-Destructive Memory Read-out}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73517}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Diese Doktorarbeit zeigt deutlich verbesserte aus Rylenbisimiden und Diarylethenen aufgebaute, photochrome Systeme f{\"u}r das nicht-destruktive Auslesen von Fluoreszenz. Dabei wird die Fluoreszenz der Emittereinheit durch photoinduzierten Elektronentransfer nur zu einer isomeren Form des Photochromes gel{\"o}scht. Die Triebkraft f{\"u}r den Fluoreszenz-l{\"o}schenden Elektronentransfer wurde mittels Rehm-Weller-Gleichung berechnet. Die erhaltenen Systeme erf{\"u}llen die notwendigen Anforderungen f{\"u}r ein nicht-destruktives Auslesen in einem auf Schreiben, Auslesen und L{\"o}schen basierenden fluoreszierenden Datenspeicher.}, subject = {Photochromie}, language = {en} } @phdthesis{Sowik2014, author = {Sowik, Thomas}, title = {Assessment of the surface functionalization of SPION and DND nanomaterials for cellular uptake and fluorescence imaging}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-103709}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {The aim of this work was to synthesize and functionalize different bio-relevant nanomaterials like silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) as contrast agents for T2 magnetic resonance imaging (MRI) and detonation nanodiamond (DND) with the neurohormone peptide allatostatin 1 (ALST1) and a fluorescent dye. Analytical techniques for the determination and quantification of surface functional groups like amines, azides, and peptides were also developed and established. Thus, in the first part of the work, a TGF-1 binding peptide and allatostatin 1 (ALST1), both supposed to act as active tumour targeting vectors, were synthesized by solid-phase peptide synthesis (SPPS) and characterized by high pressure liquid chromatography (HPLC) and mass spectrometry. Then, azide-functionalized silica nanoparticles were synthesized by the St{\"o}ber process and characterized by transmission electron microscopy (TEM) and infrared spectroscopy (IR). The surface loading of amine and azide groups was determined by a new protocol. The azide groups were reduced with sodium boronhydride to amine and then functionalized with Fmoc-Rink Amide linker according to a standard SPPS protocol. Upon cleavage of Fmoc by piperidine, the resulting dibenzofulvene and its piperidine adduct were quantified by UV/Vis spectroscopy and used to determine the amount of amine groups on the nanoparticle surface. Then, ALST1 and related tyrosine- and phenylalanine substituted model peptides were conjugated to the azide-functionalized silica nanoparticles by copper(I)-catalyzed azide-alkyne dipolar cycloaddition (CuAAC). The successful peptide conjugation was demonstrated by the Pauly reaction, which however is only sensitive to histidine- and tyrosine-containing peptides. As a more general alternative, the acid hydrolysis of the peptides to their individual amino acid building blocks followed by derivatization with phenyl isothiocyanate (PITC) allowed the separation, determination, and quantification of the constituent amino acids by HPLC. In the second part of the work, amine- and azide-functionalized silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by co-precipitation and subsequent silica-coated based on the St{\"o}ber process and characterized by TEM and IR. The amine surface loading was determined by the method already established for the pure silica systems. The azide surface loading could also be quantified by reduction with sodium boronhydride to amine groups and then conjugation to Fmoc-Rink amide linker. Upon cleavage of Fmoc with piperidine, the total amine surface loading was obtained. The amount of azide surface groups was then determined from the difference of the total amine surface loading and the amine surface loading. Thus, it was possible to quantify both amine and azide surface groups on a single nanoparticle system. Superparamagnetic iron oxide nanoparticles (SPIONs) are potent T2 contrast agents for magnetic resonance imaging (MRI). Due to their natural metabolism after injection into the blood stream, SPIONs mostly end up inside macrophages, liver, spleen or kidneys. To generate a potential target-specific SPION-based T2 contrast agent for MRI, the neurohormone peptide ALST1 was conjugated by CuAAC to the azide- and amine functionalized superparamagnetic iron oxide nanoparticles, since ALST1 is supposed to target difficult-to-treat neuroendocrinic tumours due to its analogy to galanin and somastatin receptor ligands. The organic fluorescent dye cyanine 5 (Cy5) was also conjugated to the silica-coated superparamagnetic iron oxide nanoparticles (SPIONs) via a NHS-ester to the amines to enable cell uptake studies by fluorescence microscopy. These constructs were characterized by TEM, dynamic light scattering (DLS), and IR. The amino acids of the conjugated ALST1 were determined by the HPLC method as described before for peptide-modified silica nanoparticle surfaces. Then, the relaxivity r2 was measured at 7 T. However, a r2 value of 27 L/mmolFe·s for the dual ALST1-/Cy5-functionalized silica-coated SPIONs was not comparable to T2 contrast agents in clinical use, since their relaxivity is commonly determined at 1.5 T, and no such instrument was available. However, it can be assumed that the synthesized dual ALST1-/Cy5-functionalized silica-coated SPION would show a lower r2 at 1.5 T than at 7T. Commercial T2 MRI contrast agents like VSOP-C184 from Ferropharm show at r2 values of about 30 L/mmolFe·s at 1.5 T. Still, the relaxivity of the new material has some potential for application as a T2 contrast agent. Then, the material was used in cell uptake studies by fluorescence microscopy with the conjugated Cy5 dye as a probe. The dual ALST1-/Cy5-functionalized silica-coated SPION showed a high degree of agglomeration with no cellular uptake unlike described for ALST1-functionalized nanoparticles in literature. It is assumed that upon agglomeration of the particles, constructs form which are unable to be internalized by the cellular endocytotic pathways anymore. As a future perspective, the tendency of the particle to agglomerate should be reduced by changing the coating material to polyethylene glycol (PEG) or chitosan, which are known to be bio-compatible, bio-degradable and prevent agglomeration. In the third part of the work, the rhenium compound [ReBr(CO)3(L)] with L = 2-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline and its manganese analogue were synthesized by heating the ligand and rhenium pentacarbonyl bromide or and manganese pentacarbonyl bromide respectively, in toluene. However, [MnBr(CO)3(L)] was unstable upon illumination by UV light at 365 nm. Thus, it was dismissed for further application. The photophysical properties of [ReBr(CO)3(L)] were explored, by determination of the excited-state life time by the time-correlated single-photon counting (TCSPC) method and the quantum yield by a fluorescence spectrometer equipped with an integration sphere. A value of  = 455 ns, a Stokes shift of 197 nm and a rather low quantum yield =were found. Metal complexes are supposed to have superior properties compared to organic dyes due to their large Stokes shifts, long excited-state life times, and high quantum yields. Thus, amine- and azide-functionalized detonation nanodiamond (DND) as an alternative biological inert carrier system was functionalized with ALST1 to enhance its cell uptake properties. A luminescent probe for cell uptake studies using fluorescence microscopy was also attached, either based on the new rhenium complex or the commercially available organic dye Cy5, respectively. The aldehyde-functionalized rhenium complex was conjugated to the DND via oxime ligation, which is known to be a mild and catalyst-free conjugation method. The amount of peptide ALST1 on the DND was analyzed and quantified after acid hydrolysis and PITC derivatization by HPLC as described before. Then, the ALST1-/luminescent probe-functionalized DND was investigated for its photophysical properties by fluorescence spectroscopy. The Cy5-functionalized material showed a slightly lower fluorescence performance in aqueous solution than reported in literature and commercial suppliers with a life time  < 0.4 ns and quantum yields not determinable by integration sphere due to the week signal intensity. The rhenium complex-functionalized material had a very low signal intensity in only aqueous medium, and thus determination of life times and quantum yield by fluorescence spectroscopy was not possible. After incubation with MDA-MB 231 cells, the Cy5-functionalized DND could easily be detected due to its red fluorescence. However, it was not possible to visualize the rhenium complex-functionalized DND with fluorescence microscopy due to the low fluorescence intensity of the complex in aqueous medium and the lack of proper filters for the fluorescence microscope. Cy5-functionalized DND did not show any cellular uptake in fluorescence microscopy after conjugation with ALST1. Since the nanodiamond surface is known to strongly adsorb peptides and proteins, it is assumed that the peptide chain is oriented perpendicular to the nanoparticle surface and thus not able to interact with cell membrane receptors to promote cell uptake of the particles. As a future perspective, the ALST1-promoted cellular uptake of the DND should be improved by using different linker systems for peptide conjugation to prevent adsorption of the peptide chain on the particle surface. The new analytical methods for amino-, azide-, and peptide-functionalized nanoparticles have great potential to assist in the quantification of nanoparticle surface modifications by UV/Vis spectroscopy and HPLC. The determination of surface amine and azide groups based on the cleavage of conjugated Fmoc-Rink amide linker and detected by UV/Vis spectroscopy is applicable to all amine-/azide-functionalized nanomaterials. However, particles which form very stable suspension with the cleavage mixture can cause quantification problems due to scattering, making an accurate quantification of dibenzofulvene and its piperidine adduct impossible. The detection of tyrosine- and histidine-containing peptides based on the Pauly reaction is well-suited as a fast and easy-to-perform qualitative demonstration of successful peptide surface conjugation. However, its major drawback as a colourimetric approach is that coloured particles cannot be evaluated by this method. The amino acid analysis based on HPLC after acid hydrolysis of peptides conjugated to nanoparticle surfaces to its individual building blocks and subsequent derivatization with PITC, can be used on all nanomaterials with peptide or protein surface modification. It allows detection of amino acids down to picomolar concentrations and even enables analysis of very small peptide surface loadings. However, the resulting HPLC traces are difficult to analyze. Three new analytical methods based on UV/Vis and HPLC techniques have been developed and established. They assisted in the characterization of the synthesized DND and SPIONs with dual functionalization by ALST1 and Cy5 or [ReBr(CO)3(L)], respectively. However, the nanomaterials showed no cellular uptake due to a high tendency to agglomerate. The cellular uptake should be improved and the tendency to agglomerate of the SPIONs should be reduced by changing the surface coating from silica to either PEG or chitosan. Furthermore, different linker systems for connecting peptides to DND surfaces should be synthesized and evaluated to reduce potential peptide chain adsorption.}, subject = {Nanopartikel}, language = {en} } @phdthesis{Rehm2015, author = {Rehm, Stefanie}, title = {Spermine-functionalized Perylene Bisimide Dyes: Synthesis and Self-assembly in Water}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123201}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed.}, subject = {Perylenderivate}, language = {en} } @phdthesis{Fimmel2015, author = {Fimmel, Benjamin}, title = {Perylene Bisimide Foldamers: Synthesis and In-Depth Studies of the Ground- and Excited States Properties}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125173}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {In this thesis the syntheses and detailed investigations on two foldable PBI systems were presented. The reversible, solvent-dependet folding/unfolding-behavior was used to study the ground and excited states properties of folda-dimer and folda-trimer by means of different spectroscopic methods as well as theoretical studies. The switching between charge transfer or excimer formation pathways of photoexcited molecules influenced by the spatial arrangement of chromophores within defined dye systems illustrates the impact of conformational preferences on functional properties.}, subject = {Perylenbisdicarboximide }, language = {en} }