@article{HoernesFaserlJuenetal.2018, author = {Hoernes, Thomas Philipp and Faserl, Klaus and Juen, Michael Andreas and Kremser, Johannes and Gasser, Catherina and Fuchs, Elisabeth and Shi, Xinying and Siewert, Aaron and Lindner, Herbert and Kreutz, Christoph and Micura, Ronald and Joseph, Simpson and H{\"o}bartner, Claudia and Westhof, Eric and H{\"u}ttenhofer, Alexander and Erlacher, Matthias David}, title = {Translation of non-standard codon nucleotides reveals minimal requirements for codon-anticodon interactions}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, doi = {10.1038/s41467-018-07321-8}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-321067}, year = {2018}, abstract = {The precise interplay between the mRNA codon and the tRNA anticodon is crucial for ensuring efficient and accurate translation by the ribosome. The insertion of RNA nucleobase derivatives in the mRNA allowed us to modulate the stability of the codon-anticodon interaction in the decoding site of bacterial and eukaryotic ribosomes, allowing an in-depth analysis of codon recognition. We found the hydrogen bond between the N1 of purines and the N3 of pyrimidines to be sufficient for decoding of the first two codon nucleotides, whereas adequate stacking between the RNA bases is critical at the wobble position. Inosine, found in eukaryotic mRNAs, is an important example of destabilization of the codon-anticodon interaction. Whereas single inosines are efficiently translated, multiple inosines, e.g., in the serotonin receptor 5-HT2C mRNA, inhibit translation. Thus, our results indicate that despite the robustness of the decoding process, its tolerance toward the weakening of codon-anticodon interactions is limited.}, language = {en} } @phdthesis{Hippius2007, author = {Hippius, Catharina}, title = {Multichromophoric Arrays of Perylene Bisimide Dyes - Synthesis and Optical Properties}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-24767}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {The present work deals with the synthesis and the investigation of the photophysical properties of covalently constructed calix[4]arene-perylene bisimide dye arrays containing various PBI units. The obtained conjugates are characterized with respect towards their application in a new, zigzag-type architecture of artificial light-harvesting systems. For this purpose, orange (core-unsubstituted), red (6,7,11,12-tert-butylphenoxy-functionalized) and green (1,7-pyrrolidino-substituted) perylene bisimide building blocks have been attached to the calix[4]arene scaffold. First, the monochromophoric reference systems have been studied, and second, the photophysical properties of a comprehensive series of newly synthesized, multichromophoric calix[4]arene-perylene bisimide conjugates showing efficient energy transfer processes between the individual dye subunits have been investigated. Furthermore, a series of bichromophoric compounds containing identical chromophoric units has been obtained. Towards this goal, a variety of spectroscopic techniques such as UV/vis absorption, steady state and time-resolved fluorescence emission, and femtosecond transient absorption spectroscopy as well as a spectrotemporal analysis of the obtained data has been applied. This work presents a new concept for an artificial light-harvesting system positioning the dye units by means of calix[4]arene spacers along a zigzag chain. The investigations start with the syntheses and optical properties of the monochromophoric building blocks and result in an elaborate study on the energy and electron transfer processes occurring after photoexcitation in a comprehensive series of multichromophoric calix[4]arene-perylene bisimide conjugates. Finally, the photophysical properties of a series of compounds containing each two identical PBI units are discussed.}, subject = {Fluoreszenz-Resonanz-Energie-Transfer}, language = {en} } @article{HerbstSoberatsLeowanawatetal.2018, author = {Herbst, Stefanie and Soberats, Bartolome and Leowanawat, Pawaret and Stolte, Matthias and Lehmann, Matthias and W{\"u}rthner, Frank}, title = {Self-assembly of multi-stranded perylene dye J-aggregates in columnar liquid-crystalline phases}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, doi = {10.1038/s41467-018-05018-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319914}, year = {2018}, abstract = {Many discoid dyes self-assemble into columnar liquid-crystalline (LC) phases with packing arrangements that are undesired for photonic applications due to H-type exciton coupling. Here, we report a series of crystalline and LC perylene bisimides (PBIs) self-assembling into single or multi-stranded (two, three, and four strands) aggregates with predominant J-type exciton coupling. These differences in the supramolecular packing and optical properties are achieved by molecular design variations of tetra-bay phenoxy-dendronized PBIs with two N-H groups at the imide positions. The self-assembly is driven by hydrogen bonding, slipped π-π stacking, nanosegregation, and steric requirements of the peripheral building blocks. We could determine the impact of the packing motifs on the spectroscopic properties and demonstrate different J- and H-type coupling contributions between the chromophores. Our findings on structure-property relationships and strong J-couplings in bulk LC materials open a new avenue in the molecular engineering of PBI J-aggregates with prospective applications in photonics.}, language = {en} } @phdthesis{HerbstgebHoehne2019, author = {Herbst [geb. H{\"o}hne], Stefanie}, title = {Liquid Crystalline Perylene Bisimide Assemblies}, doi = {10.25972/OPUS-16485}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164857}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Thus, the main focus of this thesis was to generate and investigate new one-dimensional LC PBI J-aggregates of an entirely new PBI organization with the transition dipole moments of the chromophores arranged parallel to the columnar axis and in slipped pi-pi stacking fashion to form highly fluorescent J-aggregates. Towards this goal, the tetra-bay substituted PBI 4c bearing free NH functional groups at the imide positions and four dendrons with branched ethylhexyl alkoxy chains at the meta-position of the phenoxy spacer (Figure 8.1a) was synthesized and compared to a literature known reference PBI 1. The mesogenic dendrons ensure LC character of the dye, which was confirmed by POM, DSC and extensive X-ray analysis. Furthermore, the sterically demanding bay-substituents prevent the cofacial assembly of the chromophores and force the dyes into a slipped pi-stacked order with the main transition dipole moments of the dyes oriented parallel to the columnar axis. X-ray analysis revealed that PBI 4c assembles into columnar triple-stranded helices consisting of side-to-side stacked molecules, which organize into a Colh phase (Figure 8.1b). FT-IR experiments of a thin film and aggregates in MCH solution confirmed the formation of H-bonds between the imide moieties. Temperature-dependent investigations furthermore proved a reversible formation of H-bonds and polarized FT-IR experiments finally gave evidence for the direction of the H-bonds along the shearing respective the columnar axis (Figure 8.1c). This was additionally verified by polarized UV-Vis absorption studies of aligned thin films. The changes in the UV-Vis absorption spectra of concentration- and temperature-dependent experiments in MCH are in agreement with the formation of J-aggregates and could be fitted to a nucleation-elongation growth mechanism. Remarkably, fluorescence spectroscopy studies revealed highly emissive aggregates in solution. These various spectroscopic techniques proved the utilization of directional noncovalent forces like hydrogen-bonding and pi-pi interactions in a cooperative manner forcing the PBI molecules in an unprecedented organization of a slipped pi-stacked arrangement with the orientation of the molecular axis and the respective transition dipole moments parallel to the columns of the LC phase. By the group of Dietrich the formation of exciton-polaritons in imprinted LC pillar microcavities as consequent use of the LC 4c was reported for the first time.In the second part of this thesis the hierarchical organization of LC PBIs into defined single-, double-, triple- and quadruple-stranded J-aggregates within crystalline and columnar LC phases, partially arranged in helical supramolecular structures in dependence of the molecular design was demonstrated. This was achieved via the preparation of a library of twelve molecules PBI 3-6(a-c) (Figure 8.2a) that was synthesized by varying the substitution position of the dendrons at the phenoxy-spacer from ortho to meta or para and by introducing an additional methyl group in ortho-position. Also the length and shape of the alkoxy chains was changed. Consequently, the impact of the sterical demand of the bay substituents concerning their phase properties, molecular arrangement and exciton coupling was investigated. POM, DSC and X-ray studies revealed the formation of only crystalline phase for the ortho-substituted PBIs 3a-c, whereas the other derivatives generated SC or LC phases. The main focus was the series with the n-C12-alkoxy chains. For the corresponding PBIs 4-6b columnar LC phases were confirmed. Retrostructural analysis by modelling and simulations gave indications for a single stranded organization for PBI 3b, a double-stranded helix for PBI 6b, a triple-stranded helical arrangement for PBI 5b and a quadruple-stranded helix for PBI 4b (Figure 8.2b-d). For all four derivatives the same molecular orientation within the columns as for PBI 4c was proven by polarized FT-IR and UV-Vis absorption studies in aligned thin films. The organization in helices of different number of strands in the Cr and LC phases of PBI 3b, 4b, 5b and 6b offered a unique possibility to elucidate the influence of particular packing arrangements on dye aggregate interactions with light. In particular, it can be investigated how exciton coupling of the dyes' transition dipole moments and fluorescence properties are affected. In this context, the spectroscopic properties were investigated in thin film, which revealed a strong bathochromic shift of the absorption maxima compared to the monomers in solution in dependence on the number of strands for PBIs 4-6b in contrast to PBI 3b (Figure 8.2e). The same tendency was observed for the respective aggregates in MCH solution. The spectral changes obtained during concentration- and temperature-dependent UV-Vis absorption studies verified the formation of J-aggregates in MCH solution and solid state. The respective aggregates are highly likely formed via a nucleation-elongation growth mechanism. Appliance of Kasha's exciton theory on the supramolecular aggregates revealed different contributions of H- and J-type coupling for the oligo-stranded helices. Under these considerations, it delivered an explanation for the absorption and fluorescence properties of the assemblies and declares the "best" J-aggregate for the double stranded arrangement of PBI 6b with purely negative couplings among neighbour molecules and a quantum yield above 74 \% of the aggregates in MCH solution. With this H-bonded PBI-based library approach of twelve derivatives it could be shown how molecular engineering of perylene bisimide dyes can be used to design defined, complex supramolecular assemblies with unprecedented packing patterns and concomitant intriguing spectroscopic properties. So far, the formation of defined liquid crystalline supramolecular structures of tetra-bay substituted PBIs by double H-bonding between free imide moieties and pi-pi interactions between the chromophores was demonstrated. The impact of the H-bonds on the molecular arrangement was investigated in the next part of this thesis. In this regard, PBIs 7 and 8 bearing a methyl or cyclohexyl group at the imide position (Figure 8.3a) were synthesized and compared to PBI 4c. The soft character of the solid state for PBIs 7 and 8 was confirmed by POM, DSC and X-ray analysis. The X-ray studies further revealed for both PBIs a change of the molecular assembly towards helical columnar structures of conventional pi-stacked chromophores (Figure 8.3b) when the directed H-bonds cannot contribute as noncovalent interactions to the assembly formation. Temperature-dependent UV-Vis absorption studies demonstrated the importance of H-bonding in MCH solution in the way that the formation of J-aggregates as for PBI 4c could not be observed for the imide substituted molecules. In the next step, the spectroscopic properties in thin film were investigated. For PBI 7 a J-type band and fluorescence spectra with an enlarged Stokes shift and increased fluorescence lifetime of 11.4 ns, compared to PBI 4c, was obtained, suggesting the generation of excimer type emission by considering the assumed conventional stacking of rotational displaced molecules from X-ray analysis. With polarized UV-Vis absorption experiments the orientation of the molecules perpendicular to the shearing direction and subsequently to the columnar axis was confirmed. These diverse investigations clearly demonstrated the imperative of H-bonds for stable, defined, LC J-aggregates with the transition dipole moments parallel to the columnar axis. With PBIs 7 and 8 it is impressively shown how small changes in the molecular structure influence the molecular arrangement dependent on the cooperation of non-covalent interactions like H-bonding and pi-pi stacking. In the last part of this thesis the generation of two-dimensional LC arrangements is presented. Since tetra-bay substituted PBIs lead always to twisted cores preventing lamellar arrangement, here 1,7-disubstitution and the simultaneous retention of the free imide positions was chosen to generate LC lamellar phases of PBIs 9a, 9b and 10 (Figure 8.4a). This molecular design was expected to form planar perylene cores that can strongly interact by pi-pi stacking and H-bonding. POM, DSC and X-ray investigations of the compounds suggest lamellar LC phases for PBIs 9a and 9b and a soft phase for PBI 10. In this regard, the goal of the formation of LC lamellar phase of PBIs could be attained. The change from dendrons with n-C12-alkoxy chains to large fork-like mesogens like in 9b clearly changed the phase properties. PBI 9b exhibits the lowest clearing point, high phase stability, least viscosity, easy shearability at room temperature and phase transitions between lamellar and Colh phases dependent on temperature. The formation of H-bonds parallel to the layers was demonstrated by polarized FT-IR experiments for all three PBIs. Concentration-dependent UV-Vis absorption studies revealed the formation of a J-type aggregate, which seems to exhibit an overall two-dimensional structure. With STM investigations the formation of lamellar structures from drop-casted 9a and 10 solutions in 1-phenyloctane on HOPG surface could be observed. Figure 8.4b illustrates a schematic possible arrangement of the molecules in the layers (here exemplarily demonstrated for PBI 9a), which has to be further confirmed by modelling and simulations. Unfortunately, fluorescence investigations of the thin films revealed non- or only slightly emissive LC states, which make them negligible for photonic applications. Nevertheless, the synthesized and analyzed compounds might be an inspiration for further investigations on the path to two-dimensional exciton transport for photonic devices.}, subject = {Fl{\"u}ssigkristall}, language = {en} } @phdthesis{Henn2004, author = {Henn, Julian}, title = {The electron density : a bridge between exact quantum mechanics and fuzzy chemical concepts}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9003}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Summary The nature of the chemical bond is a topic under constant debate. What is known about individual molecular properties and functional groups is often taught and rationalized by explaining Lewis structures, which, in turn, make extensive use of the valence concept. The valence concept distinguishes between electrons, which do not participate in chemical interactions (core electrons) and those, which do (single, double, triple bonds, lone-pair electrons, etc.). Additionally, individual electrons are assigned to atomic centers. The valence concept is of paramount success: It allows the successful planning of chemical syntheses and analyses, it explains the behavior of individual functional groups, and, moreover, it provides the "language" to think of and talk about molecular structure and chemical interactions. The resounding success of the valence concept may be misleading to forget its approximative character. On the other hand, quantum mechanics provide in principle a quantitative description of all chemical phenomena, but there is no discrimination between electrons in quantum mechanics. From the quantum mechanical point of view there are only indistinguishable electrons in the field of the nuclei, i.e., it is impossible to assign a given electron to a particular center or to ascribe a particular purpose to individual electrons. The concept of indistinguishability of micro particles is founded on the Heisenberg uncertainty relation, which states, that wavepackets diverge in the 6N dimensional phase space, such that individual trajectories can not be identified. Hence it is a deep-rooted and approved physical concept. As an introduction to the present work density partitioning schemes were discussed, which divide the total molecular density into chemically meaningful areas. These partitioning schemes are intimately related to either the concepts of bound atoms in a molecule (as in the Atoms In Molecules theory (AIM) according to Bader or as in the Hirshfeld partitioning scheme) or to the concept of chemical structure in the sense of Lewis structures, which divide the total molecular density into core and valence density, where the valence density is split up again into bonding and non-bonding electron densities. Examples are early and recent loge theories, the topological analysis by means of the Electron Localization Function (ELF), and the Natural Bond Orbital (NBO) approach. Of these partitioning schemes, the theories according to Bader (AIM), to Becke and Edgecomb (ELF) and according to Weinhold (NBO and Natural Resonance Theory, NRT), respectively, were reviewed in detail critically. Points of criticism were explicated for each of the mentioned theories. Since theoretically derived electron densities are to be compared to experimentally derived densities, a brief introduction into the theory of X-ray di®raction experiments was given and the multipole formalism was introduced. The procedure of density refinement was briefly discussed. Various suggestions for improvements were developed: One strategy would be the employment of model parameters, which are to a maximum degree mutually orthogonal, with the object of minimizing correlations among the model parameters, e.g., to introduce nodal planes into the radial functions of the multipole model. A further suggestion involves the guidance of the iterative refinement procedure by an extremum principle, which states, that when di®erent solutions to the least squares minimization problem are available with about the same statistical measures of quality and with about the same residual density, then the solution is to prefer, which yields a minimum density at the bond critical point (BCP) and a maximum polarity in terms of the ratio of distances between the BCP and the nuclei. This suggestion is based on the well known fact, that the bond polarity (in terms of the ratio of distances between the BCP and the respective nuclei) is underestimated in the experiment. Another suggestion for including physical constraints is the explicit consideration of the virial theorem, e.g., by evaluating the integration of the Laplacian over the entire atomic basins and comparing this value to zero and to the value obtained from the integration of the electron gradient field over the atomic surface. The next suggestion was to explicitly use the electrostatic theorem of Feynman (often also denoted as Hellmann-Feynman theorem), which states, that the forces onto the nuclei can be calculated from the purely classical electrostatic forces of the electron distribution and the nuclei distribution. For a stationary system, these forces must add to zero. This also provides an internal quality criterion of the density model. This can be performed in an iterative way during the refinement procedure or as a test of the final result. The use of the electrostatic theorem is expected to reduce significantly correlations among static density parameters and parameters describing vibrations, since it is a valuable tool to discriminate between physically reasonable and artificial static electron densities. All of these mentioned suggestions can be applied as internal quality criteria. The last suggestion is based on the idea to initiate the experimental refinement with a set of model parameters, which is, as much as possible close to the final solution. This can be achieved by performing periodic boundary conditions calculations, from which theoretically created files are obtained, which contain the Miller indices (h, k, l) and the respective intensity I. This file is used for a model parameter estimation (refinement), which excludes vibrations. The resulting parameters can be used for the experimental refinement, where, in a first step, the density parameters are fixed to determine the parameters describing vibrations. For a fine tuning, again the electrostatic theorem and the other above mentioned suggestions could be applied. Theoretical predictions should not be biased by the method of computation. Therefore the dependence of the density analyzing tools on the level of calculation (method of calculation/basis set) and on the substituents in complex chemical bonding situations were evaluated in the second part of the present work. A number of compounds containing formal single and double sulfur nitrogen bonds was investigated. For these compounds, experimental data were also available. The calculated data were compared internally and with the experimental results. The internal comparison was drawn with regard to questions of convergency as well as with regard to questions of consistency: The resulting molecular properties from NBO/NRT analyses were found to be very stable, when the geometries were optimized at the respective level of theory. This stability is valid for variations in the methods of calculation as well as for variations in the basis set. Only the individual resonance weights of the contributing Natural Lewis Structures differed considerably depending on the level of calculation and depending on the substituents. However, the deviations were in both cases to a large extent within a limit which preserves the descending order of the leading resonance structure weights. The resulting bond orders, i.e., the total, covalent and ionic bond order from NRT calculations, were not affected by the shift in the resonance weights. The analysis of the bond topological parameters resulted in a discrimination between insensitive parameters and sensitive parameters. The stable parameters do neither depend strongly on the method of calculation nor on the basis set. Only minor variation occurs in the numerical values of these parameters, when the level of calculation is changed or even when other functional groups (H, Me, or tBu) are employed, as long as the methods of calculation do not drop considerably below a standard level. The bond descriptors of the sulfur nitrogen bonds were found to be also stable with respect to the functional groups R = H, R = Me, and R = tBu. Stable parameters are the bond distance, the density at the bond critical point (BCP) and the ratio of distances between the BCP and the nuclei A and B, which varies clearly when considering the formal bond type. For very small basis sets like the 3-21G basis set, this characteristic stability collapses. The sensitive parameters are based on the second derivatives of the density with respect to the coordinates. This is in accordance with the well known fact, that the total second derivative of the density with respect to the coordinates is a strongly oscillating function with positive as well as negative values. A profound deviation has to be anticipated as a consequence of strong oscillations. lambda3, which describes the local charge depletion in the direction of the interaction line, is the most varying parameter. A detailed analysis revealed that the position of the BCP in the rampant edge of the Laplacian distribution is responsible for the sensitivity of the numerical value of lambda3 in formal double bonds. Since the slope of the Laplacian assumes very high values in its rampant edge, a tiny displacement of the BCP leads already to a considerable change in lambda3. This instability is not a failure of the underlying theory, but it yields de facto to a considerable dependence of sensitive bond topological properties on the method of calculation and on the applied basis sets. Since the total second derivative is important to judge on the nature of the bond in the AIM theory (closed shell interactions versus shared interactions), the changes in lambda3 can lead to differing chemical interpretations. The comparison of theoretically derived bond topological properties of various sulfur nitrogen bonds provides the possibility to measure the self consistency of this data set. All data sets clearly exhibit a linear correlation between the bond distances and the density at the BCP on one hand and between the bond distances and the Laplacian values at the BCP on the other hand. These correlations were almost independent of the basis set size. In this context, the linear regression has to be regarded exclusively as a descriptive statistics tool. There is no correlation anticipated a priori. The formal bond type was found to be readily deducible from the theoretically obtained bond topological descriptors of the model systems. In this sense, the bond topological properties are self consistent despite of the numerical sensitivity of the derivatives, as exemplified above. Often, calculations are performed with the experimentally derived equilibrium geometries and not with optimized ones. Applying this approach, the computationally costly geometry optimizations are saved. Following this approach the bond topological properties were calculated using very flexible basis sets and employing the fixed experimental geometry (which, of course, includes the application of tBu groups). Regression coe±cients similar to those from optimized geometries were obtained for correlations between bond distances and the densities at the BCP as well as for the correlation between bond distances and the Laplacian at the BCP, i.e. the approach is valid. However, the data points scattered less and the coe±cient of correlation was clearly increased when geometry optimizations were performed beforehand. The comparison between data obtained from theory and experiment revealed fundamental discrepancies: In the data set of bond topological parameters from the experiment, the behavior of only 2 out of 3 insensitive parameters was comparable to the behavior of the theoretically obtained values, i.e. theoretical and experimental bond distances as well as theoretical and experimental densities at the BCP correlate. From the theoretically obtained data it was easy to deduce the formal bond type from the position of the BCP, since it changed in a systematic manner. The respective experimentally obtained values were almost constant and did not change systematically. For the SN bonds containing compounds, the total second derivative assumes exclusively negative values in the experiment. Due to the different internal behavior, experimentally and theoretically sensitive bond topological values could not be compared directly. The qualitative agreement in the Laplacian distribution, however, was excellent. In the third and last part of this work, the application to chemical systems follows. Formal hypervalent molecules, i.e. molecules where some atoms are considered to hold more than 8 electrons in their valence shell, were investigated. These were compounds containing sulfur nitrogen bonds (H(NtBu)2SMe, H2C{S(NtBu)2(NHtBu)}2, S(NtBu)2 and S(NtBu)3) and a highly coordinated silicon compound. The set of sulfur nitrogen compounds also contained a textbook example for valence expansion, the sulfur triimide. For these molecules, experimental reference values were available from high resolution X-ray experiments. The experimental results were in the case of the sulfur triimide not unique. Furthermore, from the experimental bond topological data no definite conclusion about the formal bonding type could be drawn. The situation of sulfur nitrogen bonds in the above mentioned set of molecules was analyzed in terms of a geometry discussion and by means of a topological analysis. The methyl-substituted isolated molecules served as model compounds. For the interpretation of the bonding situation additional NBO/NRT calculations were preformed for the sulfur nitrogen compounds and an ELF calculation and analysis was performed for the silicon compound. The ELF analysis included not only the presentation and discussion of the ELF-isosurfaces (eta = 0.85), but also the investigation of populations of disynaptic valence basins and the percentage contributions to these populations of the individual atoms when the disynaptic valence basins are split into atomic contributions according to Bader's partitioning scheme. The question of chemical interest was whether hypervalency is present in the set of molecules or not. In the first case the octet rule would be violated, in the second case Pauling's verdict would be violated. While the concept of hypervalency is well established in chemistry, the violation of Pauling's verdict is not. The quantitative numbers of the sensitive bond topological values from theory and experiment were not comparable, since no systematic relationship between the experimentally and theoretically determined sensitive bond descriptors was found. However, the insensitive parameters are in good agreement and the qualitative Laplacian distribution is, with few exceptions, in excellent agreement. The formal bonding type was deduced from experimental and theoretical topological data by considering the number and shape of valence shell charge concentrations in proximity to the sulfur and nitrogen centers. The results from NBO/NRT calculations confirmed the findings. All employed density analyzing tools AIM, ELF and NBO/NRT coincided in describing the bonding situation in the formally hypervalent molecules as highly polar. A comparison and analysis of experimentally and theoretically derived electron densities led consistently to the result, that regarding this set of molecules, hypervalency has to be excluded unequivocally.}, subject = {Elektronendichtebestimmung}, language = {en} } @article{HegmannChristlPetersetal.1988, author = {Hegmann, Joachim and Christl, Manfred and Peters, Karl and Peters, Eva-Maria and Schnering, Hans Georg}, title = {Conjugated and Nonconjugated Cyclopentenones by a Reaction Cascade from Methyl 6-0xo-5-phenyl-1,3,4-oxadiazine-2-carboxylate and 1,3-Butadienes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30207}, year = {1988}, abstract = {No abstract available}, language = {en} } @article{HechtLeowanawatGerlachetal.2020, author = {Hecht, Markus and Leowanawat, Pawaret and Gerlach, Tabea and Stepanenko, Vladimir and Stolte, Matthias and Lehmann, Matthias and W{\"u}rthner, Frank}, title = {Self-Sorting Supramolecular Polymerization: Helical and Lamellar Aggregates of Tetra-Bay-Acyloxy Perylene Bisimide}, series = {Angewandte Chemie International Edition}, volume = {59}, journal = {Angewandte Chemie International Edition}, number = {39}, doi = {10.1002/anie.202006744}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224586}, pages = {17084 -- 17090}, year = {2020}, abstract = {A new perylene bisimide (PBI), with a fluorescence quantum yield up to unity, self-assembles into two polymorphic supramolecular polymers. This PBI bears four solubilizing acyloxy substituents at the bay positions and is unsubstituted at the imide position, thereby allowing hydrogen-bond-directed self-assembly in nonpolar solvents. The formation of the polymorphs is controlled by the cooling rate of hot monomer solutions. They show distinctive absorption profiles and morphologies and can be isolated in different polymorphic liquid-crystalline states. The interchromophoric arrangement causing the spectral features was elucidated, revealing the formation of columnar and lamellar phases, which are formed by either homo- or heterochiral self-assembly, respectively, of the atropoenantiomeric PBIs. Kinetic studies reveal a narcissistic self-sorting process upon fast cooling, and that the transformation into the heterochiral (racemic) sheetlike self-assemblies proceeds by dissociation via the monomeric state.}, language = {en} } @phdthesis{Hecht2021, author = {Hecht, Markus}, title = {Liquid-Crystalline Perylene Bisimide and Diketopyrrolopyrrole Assemblies}, doi = {10.25972/OPUS-21698}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-216987}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{HechtgebWagener2019, author = {Hecht [geb. Wagener], Reinhard Johannes}, title = {Processing and Characterization of Bulk Heterojunction Solar Cells Based on New Organic n-Type Semiconductors}, doi = {10.25972/OPUS-16138}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161385}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {This thesis established the fabrication of organic solar cells of DA dye donors and fullerene acceptors under ambient conditions in our laboratory, however, with reduced power conversion efficiencies compared to inert conditions. It was shown that moisture had the strongest impact on the stability and reproducibility of the solar cells. Therefore, utilization of robust materials, inverted device architectures and fast fabrication/characterization are recommended if processing takes place in air. Furthermore, the dyad concept was successfully explored in merocyanine dye-fullerene dyads and power conversion efficiencies of up to 1.14 \% and 1.59 \% were measured under ambient and inert conditions, respectively. It was determined that the major drawback in comparison to comparable BHJ devices was the inability of the dyad molecules to undergo phase separation. Finally, two series of small molecules were designed in order to obtain electron transport materials, using the acceptor-core-acceptor motive. By variation of the acceptor units especially the LUMO levels could be lowered effectively. Investigation of the compounds in organic thin film transistors helped to identify promising molecules with electron transport properties. Electron transport mobilities of up to 7.3 × 10-2 cm2 V-1 s-1 (ADA2b) and 1.39 × 10-2 cm2 V-1 s-1 (AπA1b) were measured in air for the ADA and AπA dyes, respectively. Investigation of selected molecules in organic solar cells proved that these molecules work as active layer components, even though power conversion efficiencies cannot compete with fullerene based devices yet. Thus, this thesis shows new possibilities that might help to develop and design small molecules as substitutes for fullerene acceptors.}, subject = {Heterosolarzelle}, language = {en} } @article{HeWuD'Avinoetal.2018, author = {He, Tao and Wu, Yanfei and D'Avino, Gabriele and Schmidt, Elliot and Stolte, Matthias and Cornil, J{\´e}r{\^o}me and Beljonne, David and Ruden, P. Paul and W{\"u}rthner, Frank and Frisbie, C. Daniel}, title = {Crystal step edges can trap electrons on the surfaces of n-type organic semiconductors}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, doi = {10.1038/s41467-018-04479-z}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-227957}, year = {2018}, abstract = {Understanding relationships between microstructure and electrical transport is an important goal for the materials science of organic semiconductors. Combining high-resolution surface potential mapping by scanning Kelvin probe microscopy (SKPM) with systematic field effect transport measurements, we show that step edges can trap electrons on the surfaces of single crystal organic semiconductors. n-type organic semiconductor crystals exhibiting positive step edge surface potentials display threshold voltages that increase and carrier mobilities that decrease with increasing step density, characteristic of trapping, whereas crystals that do not have positive step edge surface potentials do not have strongly step density dependent transport. A device model and microelectrostatics calculations suggest that trapping can be intrinsic to step edges for crystals of molecules with polar substituents. The results provide a unique example of a specific microstructure-charge trapping relationship and highlight the utility of surface potential imaging in combination with transport measurements as a productive strategy for uncovering microscopic structure-property relationships in organic semiconductors.}, language = {en} }