@article{BakirciFrankGumbeletal.2021,
  author    = {Bakirci, Ezgi and Frank, Andreas and Gumbel, Simon and Otto, Paul F. and F{\"u}rsattel, Eva and Tessmer, Ingrid and Schmidt, Hans-Werner and Dalton, Paul D.},
  title     = {Melt Electrowriting of Amphiphilic Physically Crosslinked Segmented Copolymers},
  series = {Macromolecular Chemistry and Physics},
  volume    = {222},
  journal   = {Macromolecular Chemistry and Physics},
  number    = {22},
  doi       = {10.1002/macp.202100259},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257572},
  year      = {2021},
  abstract  = {Various (AB)\(_{n}\) and (ABAC)\(_{n}\) segmented copolymers with hydrophilic and hydrophobic segments are processed via melt electrowriting (MEW). Two different (AB)\(_{n}\) segmented copolymers composed of bisurea segments and hydrophobic poly(dimethyl siloxane) (PDMS) or hydrophilic poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) segments, while the amphiphilic (ABAC)\(_{n}\) segmented copolymers consist of bisurea segments in the combination of hydrophobic PDMS segments and hydrophilic PPO-PEG-PPO segments with different ratios, are explored. All copolymer compositions are processed using the same conditions, including nozzle temperature, applied voltage, and collector distance, while changes in applied pressure and collector speed altered the fiber diameter in the range of 7 and 60 µm. All copolymers showed excellent processability with MEW, well-controlled fiber stacking, and inter-layer bonding. Notably, the surfaces of all four copolymer fibers are very smooth when visualized using scanning electron microscopy. However, the fibers show different roughness demonstrated with atomic force microscopy. The non-cytotoxic copolymers increased L929 fibroblast attachment with increasing PDMS content while the different copolymer compositions result in a spectrum of physical properties.},
  language  = {en}
}
@article{KadeOttoLuxenhoferetal.2021,
  author    = {Kade, Juliane C. and Otto, Paul F. and Luxenhofer, Robert and Dalton, Paul D.},
  title     = {Melt electrowriting of poly(vinylidene difluoride) using a heated collector},
  series = {Polymers for Advanced Technologies},
  volume    = {32},
  journal   = {Polymers for Advanced Technologies},
  number    = {12},
  issn      = {1042-7147},
  doi       = {10.1002/pat.5463},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-318493},
  pages     = {4951 -- 4955},
  year      = {2021},
  abstract  = {Previous research on the melt electrowriting (MEW) of poly(vinylidene difluoride) (PVDF) resulted in electroactive fibers, however, printing more than five layers is challenging. Here, we investigate the influence of a heated collector to adjust the solidification rate of the PVDF jet so that it adheres sufficiently to each layer. A collector temperature of 110°C is required to improve fiber processing, resulting in a total of 20 fiber layers. For higher temperatures and higher layers, an interesting phenomenon occurred, where the intersection points of the fibers coalesced into periodic spheres of diameter 206 ± 52 μm (26G, 150°C collector temperature, 2000 mm/min, 10 layers in x- and y-direction).The heated collector is an important component of a MEW printer that allows polymers with a high melting point to be processable with increased layers.},
  language  = {en}
}