@phdthesis{Kuehn2022,
  author    = {Kuehn, Laura},
  title     = {Earth-Abundant Metal-Catalyzed and Transition Metal-Free Borylation of Aryl Halides},
  doi       = {10.25972/OPUS-21149},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-211499},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {The present work focusses on the borylation of aryl halides. The first chapter presents a detailed review about previously reported nickel-catalyzed borylation reactions. The second chapter of the thesis describes, the borylation reaction of C-Cl bonds in aryl chlorides mediated by an NHC-stabilized nickel catalyst. The cyclohexyl substituted NHC Cy2Im was used to synthesize novel Cy2Im-stabilized nickel complexes [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1, [Ni(Cy2Im)2(η2-C2H4)] 2, and [Ni(Cy2Im)2(η2-COE)] 3. An optimized procedure was developed using 5 mol\% of the Ni-catalyst, 1.5 equivalents of the boron reagent B2pin2, and 1.5 equivalents of NaOAc as the base in methylcyclohexane at 100 °C. With these optimized conditions, it was shown that a variety of aryl chlorides, containing either electron-withdrawing or -donating groups, were converted to the corresponding aryl boronic esters in yields up to 99\% (88\% isolated) yield. Mechanistic investigations revealed that the C-Cl oxidative addition product [Ni(Cy2Im)2(Cl)(4-F3C-C6H4)] 11, which has been synthesized and isolated separately, also catalyzes the reaction. Thus, rapid oxidative addition of the C-Cl bond of the aryl chloride to [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1 to yield trans-[Ni(Cy2Im)2(Cl)(Ar)] represents the first step in the catalytic cycle. The rate limiting step in this catalytic cycle is the transmetalation of boron to nickel forming trans-[Ni(Cy2Im)2(Bpin)(Ar)], which was not possible to isolate. The boryl transfer reagent is assumed to be the anionic adduct Na[B2pin2(OAc)]. A final reductive elimination step gives the desired borylated product Ar-Bpin and regenerates [Ni(Cy2Im)2]. In the next chapter the first effective C-Cl bond borylation of aryl chlorides using NHC-stabilized Cu(I)-complexes of the type [Cu(NHC)(Cl)] was developed. The known complexes [Cu(iPr2Im)(Cl)] 15, [Cu(Me2ImMe)(Cl)] 16, and [Cu(Cy2Im)(Cl)] 17, bearing the small alkyl substituted NHCs, were synthesized in good yields by the reaction of copper(I) chloride with the corresponding free NHC at low temperature (-78 °C) in THF. A range of catalysts, bases, solvents, and boron sources were screened to determine the scope and limitations of this reaction. [Cu(Cy2Im)(Cl)] 17 revealed a significantly higher catalytic activity than [Cu(iPr2Im)(Cl)] 15. KOtBu turned out to be the only efficient base for this borylation reaction. Besides methylcyclohexane, toluene was the only solvent that gave the borylated product in moderate yields of 53\%. It was shown that a variety of electron-rich and electron-poor aryl chlorides can be converted to the corresponding aryl boronic esters in isolated yields of up to 80\%. A mechanism was proposed, in which a Cu-boryl complex [Cu(L)(Bpin)] is formed in the initial step. This is followed by C-B bond formation via σ-bond metathesis with the aryl chloride forming the aryl boronic ester and [Cu(L)(Cl)]. The latter reacts with KOtBu to give [Cu(L)(OtBu)], which regenerates the copper boryl complex by reaction with B2pin2. Chapter 4 describes studies directed towards the transition metal-free borylation of aryl halides using Lewis base adducts of diborane(4) compounds. A variety of novel pyridine and NHC adducts of boron compounds were synthesized. Adducts of the type pyridine·B2cat2 18-19 and NHC·B2(OR)4 20-23 were examined for their ability to transfer a boryl moiety to an aryl iodide. However, only Me2ImMe∙B2pin2 20 was found to be effective. The stoichiometric reaction of 20 with different substituted aryl iodides and bromides in benzene, at elevated temperatures, gave the desired aryl boronic esters in good yields. Interestingly, depending on the reaction temperature, C-C coupling between the aryl halide and the solvent (benzene), was detected leading to a side product which, together with observed hydrodehalogenation of the aryl halide, provided indications that the reaction might be radical in nature. When the boryl transfer reaction based on Me2ImMe∙B2pin2 20 was followed by EPR spectroscopy, a signal (though very weak and ill-defined) was detected, which is suggestive of a mechanism involving a boron-based radical. In addition, the boronium cation [(Me2ImMe)2∙Bpin]+ 37 with iodide as the counterion was isolated from the reaction residue, indicating the fate of the second boryl moiety. A preliminary mechanism for the boryl transfer from 20 to aryl iodides was proposed, which involves an NHC-Bpin˙ radical as the key intermediate. Me2ImMe-Bpin˙ is formed by homolytic B-B bond cleavage of the bis-NHC adduct (Me2ImMe)2∙B2pin2, which is formed in situ in small amounts under the reaction conditions. Me2ImMe-Bpin˙ reacts with the aryl iodide to give the aryl boronic ester with recovery of aromaticity. In the same step, from the second equivalent of NHC-Bpin˙, an NHC-stabilized iodo-Bpin adduct is formed as an intermediate, which is further coordinated by another NHC, yielding [(Me2ImMe)2∙Bpin]+I- 37.},
  subject      = {NHC-Nickel-Catalyst},
  language  = {en}
}
@article{FoehrenbacherZehKrahfussetal.2021,
  author    = {F{\"o}hrenbacher, Steffen A. and Zeh, Vivien and Krahfuss, Mirjam J. and Ignat'ev, Nikolai V. and Finze, Maik and Radius, Udo},
  title     = {Tris(pentafluoroethyl)difluorophosphorane and N-Heterocyclic Carbenes: Adduct Formation and Frustrated Lewis Pair Reactivity},
  series = {European Journal of Inorganic Chemistry},
  volume    = {2021},
  journal   = {European Journal of Inorganic Chemistry},
  number    = {20},
  doi       = {10.1002/ejic.202100183},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257386},
  pages     = {1941-1960},
  year      = {2021},
  abstract  = {The synthesis and characterization of Lewis acid/base adducts between tris(pentafluoroethyl)difluorophosphorane PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) and selected N-heterocyclic carbenes (NHCs) R\(_{2}\)Im (1,3-di-organyl-imidazolin-2-ylidene) and phosphines are reported. For NHCs with small alkyl substituents at nitrogen (R=Me, nPr, iPr) the adducts NHC ⋅ PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) (2 a-h) were isolated. The reaction with the sterically more demanding NHCs Dipp\(_{2}\)Im (1,3-bis-(2,6-di-iso-propylphenyl)-imidazolin-2-ylidene) (1 i) and tBu\(_{2}\)Im (1,3-di-tert-butyl-imidazolin-2-ylidene) (1 j) afforded the aNHC adducts 3 i and 3 j (a denotes "abnormal" NHC coordination via a backbone carbon atom). The use of tBuMeIm (1-tert-butyl-3-methyl-imidazolin-2-ylidene) (1 m) led to partial decomposition of the NHC and formation of the salt [tBuMeIm-H][MeIm ⋅ PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\)] (4 m). The phosphorane PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) forms adducts with PMe\(_{3}\) but does not react with PPh\(_{3}\) or PCy\(_{3}\). The mer-cis isomer of literature-known Me\(_{3}\)P ⋅ PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) (5 a) was structurally characterized. Mixtures of the phosphorane PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) and the sterically encumbered NHCs tBu\(_{2}\)Im, Dipp\(_{2}\)Im, and Dipp\(_{2}\)Im\(^{H2}\) (1,3-bis-(2,6-di-iso-propylphenyl)-imidazolidin-2-ylidene) (1 k) showed properties of FLPs (Frustrated Lewis Pairs) as these mixtures were able to open the ring of THF (tetrahydrofuran) to yield NHC-(CH\(_{2}\))\(_{4}\)O-PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\) 6 i-k. Furthermore, the deprotonation of the weak C-H acids CH\(_{3}\)CN, acetone, and ethyl acetate was achieved, which led to the formation of the corresponding imidazolium salts and the phosphates [PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\)(CH\(_{2}\)CN)]\(^{-}\) (7), [PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\)(OC(=CH\(_{2}\))CH\(_{3}\))]\(^{-}\) (8) and [PF\(_{2}\)(C\(_{2}\)F\(_{5}\))\(_{3}\)(CH\(_{2}\)CO\(_{2}\)Et)]\(^{-}\) (9).},
  language  = {en}
}