@phdthesis{Irmisch2019, author = {Irmisch, Linda}, title = {The role of septins and other regulatory proteins in abscission and midbody fate in C. elegans embryos}, doi = {10.25972/OPUS-18324}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-183244}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Abscission marks the last step of cytokinesis and gives rise to two physically separated daughter cells and a midbody remnant. This work studies abscission by examining the extent of the abscission failure in C. elegans septin and ESCRT mutants with the help of the ZF1-degradation technique. The ZF1 technique is also applied to discern a possible role for PI3K during abscission. Lastly, we test the role of proteins required for macroautophagy but not for LC3-associated phagocytosis (LAP) and show that after release into the extracellular space, the midbody is resolved via LAP.}, subject = {Zellteilung}, language = {en} } @phdthesis{Halbig2019, author = {Halbig, Benedikt}, title = {Surface Raman Spectroscopy on Ordered Metal Adsorbates on Semiconductor Substrates and Thin Intermetallic Films}, doi = {10.25972/OPUS-18138}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-181385}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Surface systems attract great scientific attention due to novel and exotic properties. The atomically structured surfaces lead to a reduced dimensionality which alters electronic correlations, vibrational properties, and their impact on each other. The emerging physical phenomena are not observed for related bulk materials. In this thesis, ordered (sub)monolayers of metal atoms (Au and Sn) on semiconductor substrates (Si(111) and Ge(111)) and ultrathin intermetallic films (CePt5 and LaPt5) on metal substrate (Pt(111)) are investigated by polarized in situ surface Raman spectroscopy. The surface Raman spectra exhibit features of specific elementary excitations like surface phonons and electronic excitations, which are suitable to gain fundamental insights into the surface systems. The Au-induced surface reconstructions (5x2) and (r3xr3) constitute quasi-one- and two-dimensional Au structures on the Si(111) substrate, respectively. The new reconstruction-related Raman peaks are analyzed with respect to their polarization and temperature behavior. The Raman results are combined with firstprinciples calculations to decide between different proposed structural models. The Au-(5x2)/Si(111) reconstruction is best described by the model of Kwon and Kang, while for Au-(r3xr3)/Si(111) the conjugate honeycomb-chained-trimer model is favored. The Sn-induced reconstructions with 1/3 monolayer on Ge(111) and Si(111) are investigated to reveal their extraordinary temperature behavior. Specific surface phonon modes are identified that are predicted within the dynamical fluctuation model. Contrary to Sn/Si(111), the corresponding vibrational mode of Sn/Ge(111) exhibits a nearly harmonic character. The reversible structural phase transition of Sn/Ge(111) from (r3xr3) to (3x3) is observed, while no phase transition is apparent for Sn/Si(111). Moreover, Raman spectra of the closely related systems Sn-(2r3x2r3)/Si(111) and thin films of a-Sn as well as the clean semiconductor surfaces Si(111)-(7x7) and Ge(111)-c(2x8) are evaluated and compared. The CePt5/Pt(111) system hosts 4f electrons whose energy levels are modified by the crystal field and are relevant for a description of the observed Kondo physics. In contrast, isostructural LaPt5/Pt(111) has no 4f electrons. For CePt5/Pt(111), distinct Raman features due to electronic Raman scattering can be unambiguously related to transitions between the crystal-field states which are depth-dependent. This assignment is supported by comparison to LaPt5/Pt(111) and group theoretical considerations. Furthermore, the vibrational properties of CePt5 and LaPt5 reveal interesting similarities but also striking differences like an unusual temperature shift of a vibration mode of CePt5, which is related to the influence of 4f electrons.}, subject = {Raman-Spektroskopie}, language = {en} } @phdthesis{Kreikenbohm2019, author = {Kreikenbohm, Annika Franziska Eleonore}, title = {Classifying the high-energy sky with spectral timing methods}, doi = {10.25972/OPUS-19205}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-192054}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Active galactic nuclei (AGN) are among the brightest and most frequent sources on the extragalactic X-ray and gamma-ray sky. Their central supermassive blackhole generates an enormous luminostiy through accretion of the surrounding gas. A few AGN harbor highly collimated, powerful jets in which are observed across the entire electromagnetic spectrum. If their jet axis is seen in a small angle to our line-of-sight (these objects are then called blazars) jet emission can outshine any other emission component from the system. Synchrotron emission from electrons and positrons clearly prove the existence of a relativistic leptonic component in the jet plasma. But until today, it is still an open question whether heavier particles, especially protons, are accelerated as well. If this is the case, AGN would be prime candidates for extragalactic PeV neutrino sources that are observed on Earth. Characteristic signatures for protons can be hidden in the variable high-energy emission of these objects. In this thesis I investigated the broadband emission, particularly the high-energy X-ray and gamma-ray emission of jetted AGN to address open questions regarding the particle acceleration and particle content of AGN jets, or the evolutionary state of the AGN itself. For this purpose I analyzed various multiwavelength observations from optical to gamma-rays over a period of time using a combination of state-of-the-art spectroscopy and timing analysis. By nature, AGN are highly variable. Time-resolved spectral analysis provided a new dynamic view of these sources which helped to determine distinct emission processes that are difficult to disentangle from spectral or timing methods alone. Firstly, this thesis tackles the problem of source classification in order to facilitate the search for interesting sources in large data archives and characterize new transient sources. I use spectral and timing analysis methods and supervised machine learning algorithms to design an automated source classification pipeline. The test and training sample were based on the third XMM-Newton point source catalog (3XMM-DR6). The set of input features for the machine learning algorithm was derived from an automated spectral modeling of all sources in the 3XMM-DR6, summing up to 137200 individual detections. The spectral features were complemented by results of a basic timing analysis as well as multiwavelength information provided by catalog cross-matches. The training of the algorithm and application to a test sample showed that the definition of the training sample was crucial: Despite oversampling minority source types with synthetic data to balance out the training sample, the algorithm preferably predicted majority source types for unclassified objects. In general, the training process showed that the combination of spectral, timing and multiwavelength features performed best with the lowest misclassification rate of \\sim2.4\\\%. The methods of time-resolved spectroscopy was then used in two studies to investigate the properties of two individual AGN, Mrk 421 and PKS 2004-447, in detail. Both objects belong to the class of gamma-ray emitting AGN. A very elusive sub-class are gamma-ray emitting Narrow Line Seyfert 1 (gNLS1) galaxies. These sources have been discovered as gamma-ray sources only recently in 2010 and a connection to young radio galaxies especially compact steep spectrum (CSS) radio sources has been proposed. The only gNLS1 on the Southern Hemisphere so far is PKS2004-447 which lies at the lower end of the luminosity distribution of gNLS1. The source is part of the TANAMI VLBI program and is regularly monitored at radio frequencies. In this thesis, I presented and analyzed data from a dedicated multiwavelength campaign of PKS 2004-447 which I and my collaborators performed during 2012 and which was complemented by individual observations between 2013 and 2016. I focussed on the detailed analysis of the X-ray emission and a first analysis of its broadband spectrum from radio to gamma-rays. Thanks to the dynamic SED I could show that earlier studies misinterpreted the optical spectrum of the source which had led to an underestimation of the high-energy emission and had ignited a discussion on the source class. I show that the overall spectral properties are consistent with dominating jet emission comprised of synchrotron radiation and inverse Compton scattering from accelerated leptons. The broadband emission is very similar to typical examples of a certain type of blazars (flat-spectrum radio quasars) and does not present any unusual properties in comparison. Interestingly, the VLBI data showed a compact jet structure and a steep radio spectrum consistent with a compact steep spectrum source. This classified PKS 2004-447 as a young radio galaxy, in which the jet is still developing. The investigation of Mrk 421 introduced the blazar monitoring program which I and collaborator have started in 2014. By observing a blazar simultaneously from optical, X-ray and gamma-ray bands during a VHE outbursts, the program aims at providing extraordinary data sets to allow for the generation of a series of dynamical SEDs of high spectral and temporal resolution. The program makes use of the dense VHE monitoring by the FACT telescope. So far, there are three sources in our sample that we have been monitoring since 2014. I presented the data and the first analysis of one of the brightest and most variable blazar, Mrk 421, which had a moderate outbreak in 2015 and triggered our program for the first time. With spectral timing analysis, I confirmed a tight correlation between the X-ray and TeV energy bands, which indicated that these jet emission components are causally connected. I discovered that the variations of the optical band were both correlated and anti-correlated with the high-energy emission, which suggested an independent emission component. Furthermore, the dynamic SEDs showed two different flaring behaviors, which differed in the presence or lack of a peak shift of the low-energy emission hump. These results further supported the hypothesis that more than one emission region contributed to the broadband emission of Mrk 421 during the observations. Overall,the studies presented in this thesis demonstrated that time-resolved spectroscopy is a powerful tool to classify both source types and emission processes of astronomical objects, especially relativistic jets in AGN, and thus provide a deeper understanding and new insights of their physics and properties.}, subject = {Astronomie}, language = {en} } @phdthesis{Goetz2019, author = {G{\"o}tz, Sebastian Reinhold}, title = {Nonlinear spectroscopy at the diffraction limit: probing ultrafast dynamics with shaped few-cycle laser pulses}, doi = {10.25972/OPUS-19213}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-192138}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {An experimental setup for probing ultrafast dynamics at the diffraction limit was developed, characterized and demonstrated in the scope of the thesis, aiming for optical investigations while simultaneously approaching the physical limits on the length and timescale. An overview of this experimental setup was given in Chapter 2, as well as the considerations that led to the selection of the individual components. Broadband laser pulses with a length of 9.3 fs, close to the transform limit of 7.6 fs, were focused in a NA = 1.4 immersion oil objective, to the diffraction limit of below 300 nm (FWHM). The spatial focus shape was characterized with off-resonance gold nanorod scatterers scanned through the focal volume. For further insights into the functionality and limitations of the pulse shaper, its calibration procedure was reviewed. The deviations between designed and experimental pulse shapes were attributed to pulse-shaper artifacts, including voltage-dependent inter-layer as well as intra-layer LCD-pixel crosstalk, Fabry-P{\´e}rot-type reflections in the LCD layers, and space-time coupling. A pixel-dependent correction was experimentally carried out, which can be seen as an extension of the initial calibration to all possible voltage combinations of the two LCD layers. The capabilities of the experimental setup were demonstrated in two types of experiments, targeting the nonlinearity of gold (Chapter 3) as well as two-dimensional spectroscopy at micro-structured surfaces (Chapter 4). Investigating thin films, an upper bound for the absolute value for the imaginary part of the nonlinear refractive index of gold could be set to |n′′ 2 (Au)| < 0.6·10-16 m2/W, together with |n′ 2 (Au)| < 1.2·10-16 m2/W as an upper bound for the absolute value of the real part. Finite-difference time-domain simulations on y-shaped gold nanostructures indicated that a phase change of ∆Φ ≥ 0.07 rad between two plasmonic modes would induce a sufficient change in the spatial contrast of emission to the far-field to be visible in the experiment. As the latter could not be observed, this value of ∆Φ was determined as the upper bound for the experimentally induced phase change. An upper bound of 52 GW/cm2 was found for the damage threshold. In Chapter 4, a novel method for nonlinear spectroscopy on surfaces was presented. Termed coherent two-dimensional fluorescence micro-spectroscopy, it is capable of exploring ultrafast dynamics in nanostructures and molecular systems at the diffraction limit. Two-dimensional spectra of spatially isolated hotspots in structured thin films of fluorinated zinc phthalocyanine (F16ZnPc) dye were taken with a 27-step phase-cycling scheme. Observed artifacts in the 2D maps were identified as a consequence from deviations between the desired and the experimental pulse shapes. The optimization procedures described in Chapter 2 successfully suppressed the deviations to a level where the separation from the nonlinear sample response was feasible. The experimental setup and methods developed and presented in the scope of this thesis demonstrate its flexibility and capability to study microscopic systems on surfaces. The systems exemplarily shown are consisting of metal-organic dyes and metallic nanostructures, represent samples currently under research in the growing fields of organic semiconductors and plasmonics.}, subject = {Ultrakurzzeitspektroskopie}, language = {en} } @phdthesis{Gabel2019, author = {Gabel, Judith}, title = {Interface Engineering of Functional Oxides: A Photoemission Study}, doi = {10.25972/OPUS-19227}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-192275}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Due to their complex chemical structure transition metal oxides display many fascinating properties which conventional semiconductors lack. For this reason transition metal oxides hold a lot of promise for novel electronic functionalities. Just as in conventional semiconductor heterostructures, the interfaces between different materials play a key role in oxide electronics. The textbook example is the (001) interface between the band insulators LaAlO\(_3\) and SrTiO\(_3\) at which a two-dimensional electron system (2DES) forms. In order to utilize such a 2DES in prospective electronic devices, it is vital that the electronic properties of the interface can be controlled and manipulated at will. Employing photoelectron spectroscopy as well as electronic transport measurements, this thesis examines how such interface engineering can be realized in the case of the LaAlO\(_3\)/SrTiO\(_3\) heterostructure: By photoemission we manage to unambiguously distinguish the different mechanisms by which SrTiO\(_3\) can be doped with electrons. An electronic reconstruction is identified as the driving mechanism to render stoichiometric LaAlO\(_3\)/SrTiO\(_3\) interfaces metallic. The doping of the LaAlO\(_3\)/SrTiO\(_3\) heterointerface can furthermore be finely adjusted by changing the oxygen vacancy \(V_{\mathrm{O}}\) concentration in the heterostructure. Combining intense x-ray irradiation with oxygen dosing, we even achieve control over the \(V_{\mathrm{O}}\) concentration and, consequently, the doping in the photoemission experiment itself. Exploiting this method, we investigate how the band diagram of SrTiO\(_3\)-based heterostructures changes as a function of the \(V_{\mathrm{O}}\) concentration and temperature by hard x-ray photoemission spectroscopy. With the band bending in the SrTiO\(_3\) substrate changing as a function of the \(V_{\mathrm{O}}\) concentration, the interfacial band alignment is found to vary as well. The relative permittivity of the SrTiO\(_3\) substrate and, in particular, its dependence on temperature and electric field is identified as one of the essential parameters determining the electronic interface properties. That is also why the sample temperature affects the charge carrier distribution. The mobile charge carriers are shown to shift toward the SrTiO\(_3\) bulk when the sample temperature is lowered. This effect is, however, only pronounced if the total charge carrier concentration is small. At high charge carrier concentrations the charge carriers are always confined to the interface, independent of the sample temperature. The dependence of the electronic interface properties on the \(V_{\mathrm{O}}\) concentration is also investigated by a complementary method, viz. by electronic transport measurements. These experiments confirm that the mobile charge carrier concentration increases concomitantly to the \(V_{\mathrm{O}}\) concentration. The mobility of the charge carriers changes as well depending on the \(V_{\mathrm{O}}\) concentration. Comparing spectroscopy and transport results, we are able to draw conclusions about the processes limiting the mobility in electronic transport. We furthermore build a memristor device from our LaAlO\(_3\)/SrTiO\(_3\) heterostructures and demonstrate how interface engineering is used in practice in such novel electronic applications. This thesis furthermore investigates how the electronic structure of the 2DES is affected by the interface topology: We show that, akin to the (001) LaAlO\(_3\)/SrTiO\(_3\) heterointerface, an electronic reconstruction also renders the (111) interface between LaAlO\(_3\) and SrTiO\(_3\) metallic. The change in interface topology becomes evident in the Fermi surface of the buried 2DES which is probed by soft x-ray photoemission. Based on the asymmetry in the Fermi surface, we estimate the extension of the conductive layer in the (111)-oriented LaAlO\(_3\)/SrTiO\(_3\) heterostructure. The spectral function measured furthermore identifies the charge carriers at the interface as large polarons.}, subject = {{\"U}bergangsmetalloxide}, language = {en} } @phdthesis{Knapp2019, author = {Knapp, Alexander Gerhard}, title = {Resonant Spin Flip Raman-Spectroscopy of Electrons and Manganese-Ions in the n-doped Diluted Magnetic Semiconductor (Zn,Mn)Se:Cl}, doi = {10.25972/OPUS-18609}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-186099}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Main focus of the present dissertation was to gain new insight about the interaction between magnetic ions and the conduction band of diluted magnetic semiconductors. This interaction in magnetic semiconductors with carrier concentrations near the metal-insulator transition (MIT) in an external magnetic field is barely researched. Hence, n-doped Zn1-xMnxSe:Cl samples were studied. Resonant Raman spectroscopy was employed at an external magnetic field between 1T and 7T and a temperature of 1.5K. The resulting magnetization of the material amplifies the splitting of states with opposite spins both in the valence and the conduction band. This is known as the "giant-Zeeman-effect". In this thesis, the resonance of the electron spin flip process, i.e. the enhancement of the signal depending on the excitation energy, was used as an indicator to determine the density of states of the charge carriers. The measured resonance profiles of each sample showed a structure, which consist of two partially overlapping Gaussian curves. The analysis of the Gaussian curves revealed that their respective maxima are separated independent of the magnetic field strenght by about 5 meV, which matches the binding energy of the donor bound exciton (D0, X). A widening of the full width at half maximum of the resonance profile was observed with increasing magnetic field. A detailed analysis of this behavior showed that the donor bound exciton spin flip resonance primarily accounts for the widening for all samples with doping concentrations below the metal insulator transition. A model was proposed for the interpretation of this observation. This is based on the fundamental assumptions of a spatially random distribution of the manganese ions on the group-II sublattice of the ZnSe crystal and the finite extension of the excitons. Thus, each exciton covers an individual quantity of manganese ions, which manifest as a local manganese concentration. This local manganese concentration is normally distributed for a set of excitons and hence, the evaluation of the distribution allows the determination of exciton radii Two trends were identified for the (D0, X) radii. The radius of the bound exciton decreases with increasing carrier concentration as well as with increasing manganese concentration. The determination of the (D0, X) radii by the use of resonant spin flip Raman spectroscopy and also the observation of the behavior of the (D0, X) radius depending on the carrier concentration, was achieved for the first time. For all samples with carrier concentrations below the metal-insulator transition, the obtained (X0) radii are up to a factor of 5.9 larger than the respective (D0, X) radii. This observation is explained by the unbound character of the (X0). For the first time, such an observation could be made by Raman spectroscopy.Beside the resonance studies, the shape of the Raman signal of the electron spin flip was analyzed. Thereby an obvious asymmetry of the signal, with a clear flank to lower Raman shifts, was observed. This asymmetry is most pronounced, when the spin flip process is excited near the (D0, X) resonance. To explain this observation, a theoretical model was introduced in this thesis. Based on the asymmetry of the resonantly excited spin flip signal, it was possible to estimate the (D0, X) radii, too. At external magnetic fields between 1.25T and 7T, the obtained radii lie between 2.38nm and 2.75nm. Additionally, the asymmetry of the electron spin flip signal was observed at different excitation energies. Here it is striking that the asymmetry vanishes with increasing excitation energy. At the highest excitation energy, where the electron spin flip was still detectable, the estimated radius of the exciton is 3.92nm. Beside the observations on the electron spin flip, the resonance behavior of the spin flip processes in the d-shell of the incorporated Mn ions was studied in this thesis. This was performed for the direct Mn spin flip process as well as for the sum process of the longitudinal optical phonon with the Mn spin flip. For the Stokes and anti-Stokes direct spin flip process and for the Stokes sum process, each the resonance curve is described by considering only one resonance mechanism. In contrast, resonance for the sum process in which an anti-Stokes Mn spin flip is involved, consists of two partially overlapping resonances due to different mechanisms. A detailed analysis of this resonance profile showed that for (Zn,Mn)Se at the chosen experimental parameters, an incoming and outgoing resonance can be achieved, separated by a few meV. Hereby, at a specific excitation energy range and a high excitation power, it was possible to achieve an inversion of the anti-Stokes to Stokes intensity, because only the anti-Stokes Mn spin flip process was enhanced resonantly.}, subject = {Raman-Spektroskopie}, language = {en} } @phdthesis{Frank2019, author = {Frank, Erik Thomas}, title = {Behavioral adaptations in the foraging behaviour of \(Megaponera\) \(analis\)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-156544}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {An efficient foraging strategy is one of the most important traits for the fitness of animals. The theory of optimal foraging tries to predict foraging behaviour through the overarching question: how animals should forage so as to minimize costs while maximizing profits? Social insects, having occupied nearly every natural niche through widely different strategies, offer themselves as an ideal group to study how well optimal foraging theory can explain their behaviour and success. Specialization often leads to unique adaptations in morphology and behaviour. I therefore decided to investigate the behaviour of Megaponera analis. This ponerine ant species is specialized on hunting only termites of the subfamily Macrotermitinae at their foraging sites. Their foraging behaviour is regulated by a handful of individual scouts (10-20) that search for termite foraging sites before returning to the nest to recruit a large number of nestmates (200-500 ants). These ants then follow the scout in a column formation to the termites and after the hunt return together to the nest, these raids occur two to five times per day. Predators of highly defensive prey likely develop cost reducing adaptations. The evolutionary arms race between termites and ants led to various defensive mechanisms in termites, e.g. a caste specialized in fighting predators. As M. analis incurs high injury/mortality risks when preying on termites, some risk mitigating adaptations have evolved. I show that a unique rescue behaviour in M. analis, consisting of injured nestmates being carried back to the nest, reduces combat mortality. These injured ants "call for help" with pheromones present in their mandibular gland reservoirs. A model accounting for this rescue behaviour identifies the drivers favouring its evolution and estimates that rescuing allows for maintaining a 29\% larger colony size. Heavily injured ants that lost too many legs during the fight on the other hand are not helped. Interestingly, this was regulated not by the helper but by the uncooperativeness of the injured ant. I further observed treatment of the injury by nestmates inside the nest through intense allogrooming directly at the wound. Lack of treatment increased mortality from 10\% to 80\% within 24 hours, with the cause of death most likely being infections. Collective decision-making is one of the main mechanisms in social insects through which foraging is regulated. However, individual decision-making can also play an important role, depending on the type of foraging behaviour. In M. analis only a handful of individuals (the scouts) hold all the valuable information about foraging sites. I therefore looked at predictions made by optimal foraging theory to better understand the interplay between collective and individual decision-making in this obligate group-raiding predator. I found a clear positive relation between raid size and termite abundance at the foraging site. Furthermore, selectivity of the food source increased with distance. The confirmation of optimal foraging theory suggests that individual scouts must be the main driver behind raid size, choice and raiding behaviour. Therefore most central place foraging behaviours in M. analis were not achieved by collective decisions but rather by individual decisions of scout ants. Thus, 1\% of the colony (10-20 scouts) decided the fate and foraging efficiency of the remaining 99\%. Division of labour is one of the main reasons for the success of social insects. Worker polymorphism, age polyethism and work division in more primitive ants, like the ponerines, remain mostly unexplored though. Since M. analis specializes on a defensive prey, adaptations to reduce their foraging costs can be expected. I found that the work division, task allocation and column-formation during the hunt were much more sophisticated than was previously thought. The column-formation was remarkably stable, with the same ants resuming similar positions in subsequent raids and front ants even returning to their positions if displaced in the same raid. Most of the raid tasks were not executed by predetermined members of the raid but were filled out as need arose during the hunt, with a clear preference for larger ants to conduct most tasks. I show that specialization towards a highly defensive prey can lead to very unique adaptations in the foraging behaviour of a species. I explored experimentally the adaptive value of rescue behaviour focused on injured nestmates in social insects. This was not only limited to selective rescuing of lightly injured individuals by carrying them back (thus reducing predation risk) but moreover includes a differentiated treatment inside the nest. These observations will help to improve our understanding of the evolution of rescue behaviour in animals. I further show that most optimal foraging predictions are fulfilled and regulated by a handful of individuals in M. analis. Lastly, I propose that the continuous allometric size polymorphism in M. analis allows for greater flexibility in task allocation, necessary due to the unpredictability of task requirements in an irregular system such as hunting termites in groups. All of my observations help to further understand how a group-hunting predator should forage so as to minimize costs while maximizing profits.}, subject = {Stechameisen}, language = {en} } @phdthesis{Franke2019, author = {Franke, Christian}, title = {Advancing Single-Molecule Localization Microscopy: Quantitative Analyses and Photometric Three-Dimensional Imaging}, doi = {10.25972/OPUS-15635}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-156355}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Since its first experimental implementation in 2005, single-molecule localization microscopy (SMLM) emerged as a versatile and powerful imaging tool for biological structures with nanometer resolution. By now, SMLM has compiled an extensive track-record of novel insights in sub- and inter- cellular organization.\\ Moreover, since all SMLM techniques rely on the analysis of emission patterns from isolated fluorophores, they inherently allocate molecular information \$per\$ \$definitionem\$.\\ Consequently, SMLM transitioned from its origin as pure high-resolution imaging instrument towards quantitative microscopy, where the key information medium is no longer the highly resolved image itself, but the raw localization data set.\\ The work presented in this thesis is part of the ongoing effort to translate those \$per\$ \$se\$ molecular information gained by SMLM imaging to insights into the structural organization of the targeted protein or even beyond. Although largely consistent in their objectives, the general distinction between global or segmentation clustering approaches on one side and particle averaging or meta-analyses techniques on the other is usually made.\\ During the course of my thesis, I designed, implemented and employed numerous quantitative approaches with varying degrees of complexity and fields of application.\\ \\ In my first major project, I analyzed the localization distribution of the integral protein gp210 of the nuclear pore complex (NPC) with an iterative \textit{k}-means algorithm. Relating the distinct localization statistics of separated gp210 domains to isolated fluorescent signals led, among others, to the conclusion that the anchoring ring of the NPC consists of 8 homo-dimers of gp210.\\ This is of particular significance, both because it answered a decades long standing question about the nature of the gp210 ring and it showcased the possibility to gain structural information well beyond the resolution capabilities of SMLM by crafty quantification approaches.\\ \\ The second major project reported comprises an extensive study of the synaptonemal complex (SNC) and linked cohesin complexes. Here, I employed a multi-level meta-analysis of the localization sets of various SNC proteins to facilitate the compilation of a novel model of the molecular organization of the major SNC components with so far unmatched extend and detail with isotropic three-dimensional resolution.\\ In a second venture, the two murine cohesin components SMC3 and STAG3 connected to the SNC were analyzed. Applying an adapted algorithm, considering the disperse nature of cohesins, led to the realization that there is an apparent polarization of those cohesin complexes in the SNC, as well as a possible sub-structure of STAG3 beyond the resolution capabilities of SMLM.\\ \\ Other minor projects connected to localization quantification included the study of plasma membrane glycans regarding their overall localization distribution and particular homogeneity as well as the investigation of two flotillin proteins in the membrane of bacteria, forming clusters of distinct shapes and sizes.\\ \\ Finally, a novel approach to three-dimensional SMLM is presented, employing the precise quantification of single molecule emitter intensities. This method, named TRABI, relies on the principles of aperture photometry which were improved for SMLM.\\ With TRABI it was shown, that widely used Gaussian fitting based localization software underestimates photon counts significantly. This mismatch was utilized as a \$z\$-dependent parameter, enabling the conversion of 2D SMLM data to a virtual 3D space. Furthermore it was demonstrated, that TRABI can be combined beneficially with a multi-plane detection scheme, resulting in superior performance regarding axial localization precision and resolution.\\ Additionally, TRABI has been subsequently employed to photometrically characterize a novel dye for SMLM, revealing superior photo-physical properties at the single-molecule level.\\ Following the conclusion of this thesis, the TRABI method and its applications remains subject of diverse ongoing research.}, subject = {Einzelmolek{\"u}lmikroskopie}, language = {en} } @phdthesis{Reggane2019, author = {Reggane, Maude}, title = {Lowering lattice forces of crystalline bases}, doi = {10.25972/OPUS-16380}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-163803}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The number of active pharmaceutical ingredients (APIs) exhibiting a low solubility in aqueous media or a slow dissolution rate kept rising over the past years urging formulation scientists to explore new ways to tackle poor solubility and to enable oral absorption from such compounds. Bioavailability of poorly water-soluble compounds can be improved by increasing the dissolution rate and/or by increasing the gastro intestinal concentration through transient supersaturation. The dissolution rate of the API can be typically modified by the choice of the physical form, the polymorphic form, the powder surface area, and the local pH, while a transient supersaturation can be extended mainly by nucleation or crystallization inhibiting effects. In the present thesis, three strategies were explored to tailor the dissolution rate, the supersaturation and the hydrotropic solubilization of APIs, weak bases, respectively. The first part of this thesis followed a bioinspired approach to extend the kinetic solubility of salts and co-crystals. API salts and co-crystals are high energy forms that can generate supersaturated solutions with respect to any more stable form, typically the most stable API form in physiological environment. The transient kinetic stabilization of supersaturated states, also termed "parachute effect", is considered to improve bioavailability and is one aspect of the formulation that can be tailored. Inspiration from plants, which store high concentrations of aromatic bases in their vacuoles via complexation with polyphenols, sparked the evaluation to use hydroxybenzoic acid derivatives for salt or co-crystal engineering. Imatinib was chosen as the model compound for this investigation as its aromaticity and flat molecular architecture could favor interactions with hydroxybenzoic acid derivatives. One 1:1 Imatinib syringate co-crystal (I-SYA (1:1)) and one 1:2 Imatinib syringate co-crystal salt (I-SYA (1:2)) were obtained. Their dissolution assays in simulated intestinal fluid (SIF; a 50 mM phosphate buffer of pH 6.8) revealed that they formed stable solutions for several hours and days, respectively, in contrast to the marketed Imatinib mesylate salt (approx. 1h). This kinetic stability in solution was linked to the nucleation inhibition of the less soluble Imatinib hydrate by syringic acid (SYA). In solution 1H-NMR studies evidenced the aggregation of Imatinib and SYA. The amphiphilic nature of both Imatinib and SYA is considered to drive their association in solution, additionally, multiple intermolecular interactions such as hydrogen bonds and π-π stacking are likely to contribute. The association in solution enabled a phase of extended supersaturation, i.e., a parachute against desupersaturation, while no negative impact of aggregation on the permeability of both Imatinib and SYA was observed. A prerequisite to reach supersaturation is a rapid dissolution and release of the API from the formulation. Accordingly, the second and third part of this thesis is focused on the so-called "spring effect" of amorphous solid dispersions (ASDs). The addition of a hydrotropic agent, meaning a molecule that can solubilize poorly water-soluble APIs in aqueous solutions (well-known examples of hydrotropes are benzoic acid and nicotinamide) into an amorphous Ciprofloxacin-polymer matrix led to ternary systems with a significantly faster release and higher concentration of the API in SIF as compared to binary ASDs consisting of Ciprofloxacin (CPX) and polymer only. The stronger spring could be rationalized by an improved wetting of the ASD, or/and by a hydrotropic solubilization effect, although these hypotheses need further investigation. Marked differences in the dissolution profiles of binary ASDs were observed in biorelevant fasted simulated intestinal fluid (FaSSIF; a medium containing Na taurocholate (3 mM) and lecithin (0.75 mM) at pH 6.5) as compared to SIF. In FaSSIF, API release from binary polymeric ASDs was largely improved, and the duration of supersaturation was extended. This suggests that the bile salt Na taurocholate and lecithin present in FaSSIF do improve both dissolution rate and supersaturation of ASDs, the two pillars of ASDs as oral enabling formulations. Indeed, bile salts are endogenous surfactants which, together with phospholipids, play an important role in the wetting, solubilization, and absorption of lipophilic compounds. The aim of the third part of the present thesis was to study ASDs as formulation principles reducing the strong positive food effect of Compound A. By inclusion of Na taurocholate (NaTC) within the matrix of polymeric ASDs a significant improvement of the dissolution rate and the kinetic solubility in SIF were achieved. Transient supersaturated states of up to four orders of magnitude over the equilibrium solubility were obtained. Two ASDs were selected for further in vivo evaluation in dog. The first was a NaTC/Eudragit E based ASD meant to dissolve and release Compound A in the acidic environment of the stomach, where its solubility is the highest. The second relied on the release of Compound A in the neutral environment of the duodenum and jejunum by using an enterically dissolving polymer, HPMC-P. Releasing the API at the site of its putative absorption was an attempt to control supersaturation levels in the duodenum and to prevent portioning and thus dilution effects during transfer from the stomach. In fasted dogs, exposure from the NaTC/HPMC-P ASD was close to that of the reference Compound A formulation under fed conditions, which suggests an improved dissolution rate and kinetic solubility under fasted conditions (historical data). The exposure from the NaTC/Eudragit E ASD was twice as low as from the NaTC/HPMC-P ASD, and also lower compared to Compound A reference formulation, whereas in vitro the parachute effect of the NaTC/Eudragit E ASD was largely superior to that of the NaTC/HPMC-P ASD. A difference in the extend of the parachute could be related to differences in the thermodynamic activity of dissolved molecules from the two ASDs. Indeed, the high instability of the NaTC/HPMC-P ASD could stem from a high thermodynamic activity driving diffusion through membranes, whereas less instable solutions of NaTC/Eudragit E could indicate solubilization effects which often translate into a lower flux through the biological membrane. Additionally, the pH of the environment where dissolution takes place might be an important factor for absorption, and could also account for the difference in exposure from the two ASDs. The aim of this thesis was to explore how the intimate environment of weak, poorly soluble bases could be functionalized to improve dissolution rate and kinetic solubility. The investigations highlighted that the performance of enabling oral delivery formulations of weak bases in aqueous media can be enhanced at different levels. At one end initial dissolution rate of ASDs can be tailored by introducing hydrotropes or/and bile salts within the polymeric matrix of ASDs. Bile salts, when combined with appropriate polymers, had also a precipitation inhibition effect enabling the maintenance of supersaturation for a bio-relevant period of time. These results set the ground for further investigations to comprehend specific interactions between bile salts and APIs, and potentially polymers at the molecular level. It will be interesting to explore how such complex systems can be exploited in the formulation design of poorly water-soluble APIs. In addition, it was observed that the duration of supersaturation generated by salts/co-crystals can be extended by the pertinent selection of counterions or coformers. The in vivo relevance of these tunings remains to be evaluated, as translation from closed, in vitro systems to the highly dynamic gastrointestinal environment is not straightforward. A better understanding of the contribution of each kinetic stage (dissolution, supersaturation, and precipitation) and their interplay with physiological factors impacting absorption is essential to facilitate the design of formulations with improved pharmacokinetics.}, subject = {Kokristallisation}, language = {en} } @phdthesis{Kruber2019, author = {Kruber, Philip}, title = {Functional analysis of DROSHA and SIX1 mutations in kidney development and Wilms tumor}, doi = {10.25972/OPUS-16141}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161418}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Wilms tumor (WT) is the most common kidney cancer in childhood. It is a genetically heterogeneous tumor and several genetic alterations have been identified in WT patients. Recurrent mutations were found in the homeo-domain of SIX1 and SIX2 in high proliferative tumors (18.1\% of the blastemal-type tumors) as well as in the microprocessor genes DROSHA and DGCR8 (18.2\% of the blastemal-type tumors), indicating a critical role of the SIX-SALL pathway and aberrant miRNA processing in WT formation. Underlined by the fact that a significant overlap between mutations in DROSHA and SIX1 was found, indicating a synergistic effect. To characterize the in vivo role of DROSHA and SIX mutations during kidney development and their oncogenic potential, I analyzed mouse lines with either a targeted deletion of Drosha or an inducible expression of human DROSHA or SIX1 carrying a tumor-specific E1147K or Q177R mutation, respectively. The DROSHA mutation E1147K was predicted to act in a dominant negative manner. Six2-cre mediated deletion of Drosha in nephron progenitors led to a lethal phenotype with apoptotic loss of progenitor cells and early termination of nephrogenesis. Mosaic deletions via Wt1-creERT2 resulted in a milder phenotype with viable offspring that developed proteinuria after 2-4 weeks, but no evidence of tumor formation. Activation of the DROSHA-E1147K transgene via Six2-cre, on the other hand, induced a more severe phenotype with apoptosis of progenitor cells, proteinuria and glomerular sclerosis. The severely growth-retarded mice died within the first two months. This strong phenotype was consistent with the predicted dominant-negative effect of DROSHA-E1147K. Analysis of the SIX1-Q177R mutation suggested that the mutation leads to a shift in DNA binding specificity instead of a complete loss of DNA binding. This may end up in subtle changes of the gene regulatory capacity of SIX1. Six2-cre mediated activation of SIX1-Q177R lead to a viable phenotype with no alterations or shortened life span. Yet a global activation of SIX1-Q177R mediated by Zp3-cre resulted in bilateral hydronephrosis and juvenile death of the mice. To mimic the synergistic effect of DROSHA and SIX1 mutations, I generated compound mutants in two combinations: A homozygous deletion of Drosha combined with an activation of SIX1-Q177R and a compound mutant with activation of DROSHA-E1147K and SIX1-Q177R. Each mouse model variant displayed new phenotypical alterations. Mice with Six2-cre mediated homozygous deletion of Drosha and activation of SIX1-Q177R were not viable, yet heterozygous deletion of Drosha and activation of SIX1-Q177R led to hydronephrosis, proteinuria and an early death around stage P28. Combined activation of DROSHA-E1147K and SIX1-Q177R under Six2-cre resulted in proteinuria, glomerulosclerosis and lesions inside the kidney. These mice also suffered from juvenile death. Both mouse models could confirm the predicted synergistic effect. While these results underscore the importance of a viable self-renewing progenitor pool for kidney development, there was no evidence of tumor formation. This suggests that either additional alterations in mitogenic or antiapoptotic pathways are needed for malignant transformation, or premature loss of a susceptible target cell population and early lethality prevent WT formation.}, subject = {Nephroblastom}, language = {en} }