@phdthesis{Schulz2016,
  author    = {Schulz, Robert Frank},
  title     = {A radio view of high-energy emitting AGNs},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137358},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The most energetic versions of active galactic nuclei (AGNs) feature two highly-relativistic plasma outflows, so-called jets, that are created in the vicinity of the central supermassive black hole and evolve in opposite directions. In blazars, which dominate the extragalactic gamma-ray sky, the jets are aligned close to the observer's line of sight leading to strong relativistic beaming effects of the jet emission. Radio observations especially using very long baseline interferometry (VLBI) provide the best way to gain direct information on the intrinsic properties of jets down to sub-parsec scales, close to their formation region. In this thesis, I focus on the properties of three AGNs, IC 310, PKS 2004-447, and 3C 111 that belong to the small non-blazar population of gamma-ray-loud AGNs. In these kinds of AGNs, the jets are less strongly aligned with respect to the observer than in blazars. I study them in detail with a variety of radio astronomical instruments with respect to their high-energy emission and in the context of the large samples in the monitoring programmes MOJAVE and TANAMI. My analysis of radio interferometric observations and flux density monitoring data reveal very different characteristics of the jet emission in these sources. The work presented in this thesis illustrates the diversity of the radio properties of gamma-ray-loud AGNs that do not belong to the dominating class of blazars.},
  subject      = {Aktiver galaktischer Kern},
  language  = {en}
}
@phdthesis{Bankoglu2016,
  author    = {Bankoglu, Ezgi Eyl{\"u}l},
  title     = {Oxidative status and genomic damage in an obesity model},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137566},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Several cohort studies showed that obesity increases the risk of chronic disease such as T2DM, hypertension and non-alcoholic fatty liver disease and various types of cancer. Different factors were described that might be involving in these diseases in obesity. Some of these suggested factors were chronic infection, elevated free fatty acids, increased ROS formation, mitochondrial dysfunction and raised NAPDH oxidase activity. Obesity is a multifactorial disease and it is very hard to distinguish between all of these factors. In this study, we wanted to focus on the association between obesity, oxidative stress and genomic damage in kidney, liver and colon, which are the most relevant organs for cancer risk according to the cohort studies. Our findings indicated elevated oxidative stress in kidney, liver and colon together with elevated lipid, RNA and DNA oxidation in the whole body. Additionally, we were able to show increased DNA damage in kidney, liver and colon. Since obesity has become an epidemic all over the world, possible therapeutic applications such as life style changes (diet and sport), pharmacological supplements and various type of surgeries are increasing. As a second question, we focused on the effect of weight loss, which is supplied either by Roux-en-Y gastric bypass surgery or by caloric restriction designed in a way to provide the same extent of weight loss, on oxidative stress and genomic damage. Our results indicated that weight loss either by gastric bypass surgery or by caloric restriction led to reduced oxidative stress and genomic damage in kidney, liver and colon. We could not find any difference between the weight loss methods, except the DNA oxidation and repair marker urinary 8-oxodG, which was still elevated after RYGB, but not after caloric restriction. It is known that hyperinsulinemia and in the long term T2DM are among the biggest concerns in obese individuals. Since we know the mutagenic potential of elevated insulin levels from previous data in our working group, the correlation between the highly mutagenic DNA DBSs marker, γ-H2AX and the plasma insulin level was tested and the findings indicated a positive correlation. In order to demonstrate the association between insulin-related oxidative stress and genomic damage, we used in vitro and in vivo models with Pten deficiency. In this part of study, the work was focused on liver. Pten is a known negative regulator of the PI3K/Akt pathway, which is responsible for the elevated NADPH oxidase activity and mitochondrial dysfunction through elevated insulin levels. Pten inhibition or deficiency were used to sensitize the system to insulin. Non-transformed immortalized human hepatocytes were used to show the mutagenic potential of elevated insulin and these in vitro data revealed once more the link between insulin signaling, elevated oxidative stress and genomic damage. Since the metabolic function of the liver is not only due to the extent of the hepatic insulin response but is also affected by systemic interactions, a whole-body Pten haplodeficient mouse model with an additional Pten+/-/Akt2-/- group was utilized for in vivo investigation of insulin-mediated toxicity. Our findings in this model suggested that Pten deficiency alone can cause an increase in oxidative stress. HFD alone was sufficient to increase the expression of HO-1 and genomic damage significantly. Moreover, the combination (whole-body Pten haplodeficient mice fed with HFD) showed significantly elevated oxidative stress and genomic damage in mouse liver. However, Akt2 knockout could only reduce the oxidative stress and DNA damage in high fat diet fed mice significantly. All these findings demonstrated that obesity can induce oxidative stress and genomic damage. Elevated insulin levels are associated with obesity-mediated oxidative stress and genomic damage. However, the underlying mechanisms are surely multifaceted and complicated. For example, Pten as oncogene might also induce other mechanisms besides the elevation of the PI3K/Akt pathway activity. In conclusion, it is clear that oxidative stress and DNA damage are linked to obesity and that weight loss can reduce these two factors. Since DNA-damage is associated with an elevated cancer risk, it might be logical to use an antioxidant therapy in obese individuals to reduce the side effects and oxidative stress dependent mutagenicity and cancer risk in these individuals. However, much more research will be needed to support this idea experimentally.},
  subject      = {{\"U}bergewicht},
  language  = {en}
}
@phdthesis{Wahl2016,
  author    = {Wahl, Oliver},
  title     = {Impurity Profiling of Challenging Active Pharmaceutical Ingredients without Chromophore},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137205},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The impurity profiling of pharmaceutical ingredients can oppose many challenges. The best part of active pharmaceutical ingredients (APIs) and the related substances are detectable by UV detection, a very common detection principle. However, if an API lacks a suitable chromophore other means of detection are necessary. The corona charged aerosol detector (CAD) is a detector capable of detecting substances independent of their chemical structure. This "universal" detector has only one limitation: The analyte has to have a sufficiently low vapor pressure. Another important challenge that comes often together with the lack of a chromophore concerns the separation. These substances (e.g. most amino acids and derivatives) often contain structures that make them difficult to retain on conventional reversed phase columns. Possible solutions to overcome these challenges, like the application of the CAD and the benefit of so-called mixed-mode stationary phases in impurity profiling for pharmacopoeial purposes were explored in this work. The related substances analyzed in this thesis comprise amino acids, inorganic ions, bisphosphonic acids, basic and acidic derivatives of amino acids (esters and amides). The successful development and validation of mixed-mode liquid chromatography methods with CAD detection for carbocisteine and ibandronate sodium might help to increase the acceptance of this versatile detector in the pharmaceutical industry and in official authorities dealing with the determination of related substances. The combination of UV and CAD detection proved very useful during the analysis of Bicisate. Most of the related substances and some unidentified impurities were detectable by CAD whereas a synthesis by-product, a semi-volatile ester, was only detectable in the UV trace. The simple combination covers all relevant impurities in a single analysis. Two truly orthogonal methods regarding separation and detection for the enantiomeric purity of magnesium-L-aspartate helped to find the reason for elevated D aspartic acid content in the drug substance. A very quick and sensitive indirect separation using the OPA derivatization with NAC was developed as a powerful screening tool, whereas the direct separation of D- and L-CBQCA-Asp derivatives confirmed the results. Both methods were optimized in order to do without substances mentioned on the REACH list, like sodium tetraborate which is very frequently applied in standard derivatization protocols and CE separations. The importance of orthogonal detection principles in the determination of related substances of amino acids was discussed in a review article dealing with the revision of amino acid monographs in the Ph. Eur..},
  subject      = {Chromatographie},
  language  = {en}
}
@phdthesis{Eck2016,
  author    = {Eck, Saskia},
  title     = {The impact of thermogenetic depolarizations of specific clock neurons on Drosophila melanogaster's circadian clock},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137118},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The rotation of the earth around its own axis determines periodically changing environmental conditions, like alterations in light and temperature. For the purpose of adapting all organisms' behavior, physiology and metabolism to recurring changes, endogenous clocks have evolved, which allow the organisms to anticipate environmental changes. In chronobiology, the scientific field dealing with the investigation of the underlying mechanisms of the endogenous clock, the fruit fly Drosophila melanogaster serves as a beneficial model organism. The fruit fly's circadian clock exhibits a rather simple anatomical organization, but nevertheless constitutes homologies to the mammalian system. Thus also in this PhD-thesis the fruit fly was used to decipher general features of the circadian clock's interneuronal communication. Drosophila melanogaster's circadian clock consists of about 150 clock neurons, which are located in the central nervous system of the fly. These clock neurons can be subdivided regarding to their anatomical position in the brain into the dorsal neurons (DN1s, DN2s, DN3s), as well as into the lateral neurons (LPNs, LNds, s-LNvs, l-LNvs). Functionally these clock neuron clusters can be classified as Morning- and Evening oscillators (M- and E- oscillators), driving different parts of the fly's locomotor activity in light-dark conditions (LD). The Morning-oscillators are represented by the s-LNvs and are known to be the main pacemakers, driving the pace of the clock in constant conditions (constant darkness; DD). The group of Evening-oscillators consists of the LNds, the DN1s and the 5th s-LNv and is important for the proper timing of the evening activity in LD. All of these clock neurons are not functionally independent, but form complex neuronal connections, which are highly plastic in their response to different environmental stimuli (Zeitgebers), like light or temperature. Even though a lot is known about the function and the importance of some clock neuron clusters, the exact interplay between the neurons is not fully known yet. To investigate the mechanisms, which are involved in communication processes among different clock neurons, we depolarized specific clock cells in a temporally and cell-type restricted manner using dTrpA1, a thermosensitive cation channel, which allows the depolarization of neurons by application of temperature pulses (TP) above 29°C to the intact and freely moving fly. Using different clock specific GAL4-driver lines and applying TPs at different time points within the circadian cycle in DD enabled us with the help of phase shift experiments to draw conclusions on the properties of the endogenous clock. The obtained phase shifts in locomotor behavior elicited by specific clock neuronal activation were plotted as phase response curves (PRCs). The depolarization of all clock neurons shifted the phase of activity the strongest, especially in the delay zone of the PRC. The exclusive depolarization of the M oscillators together with the l-LNvs (PDF+ neurons: s-LNvs \& l-LNvs) caused shifts in the delay and in the advance zone as well, however the advances were severely enhanced in their temporal occurrence ranging into the subjective day. We concluded that light might have inhibitory effects on the PDF+ cells in that particular part of the PRC, as typical light PRCs do not exhibit that kind of distinctive advances. By completely excluding light in the PRC-experiments of this PhD-thesis, this photic inhibitory input to the PDF+ neurons is missing, probably causing the broadened advance zone. These findings suggest the existence of an inhibitory light-input pathway to the PDF+ cells from the photoreceptive organs (Hofbauer-Buchner eyelet, photoreceptor cells of compound eyes, ocelli) or from other clock neurons, which might inhibit phase advances during the subjective day. To get an impression of the molecular state of the clock in the delay and advance zone, staining experiments against Period (PER), one of the most important core clock components, and against the neuropeptide Pigment Dispersing Factor (PDF) were performed. The cycling of PER levels mirrored the behavioral phase shifts in experimental flies, whereas the controls were widely unaffected. As just those neurons, which had been depolarized, exhibited immediate shifted PER oscillations, this effect has to be rapidly regulated in a cell-autonomous manner. However, the molecular link between clock neuron depolarization and shifts in the molecular clock's cycling is still missing. This issue was addressed by CREB (cAMP responsive element binding protein) quantification in the large ventrolateral neurons (l-LNvs), as these neurons responded unexpectedly and strongest to the artificial depolarization exhibiting a huge increase in PER levels. It had been previously suggested that CREB is involved in circadian rhythms by binding to regulatory sequences of the period gene (Belvin et al., 1999), thus activating its transcription. We were able to show, that CREB levels in the l-LNvs are under circadian regulation, as they exhibit higher CREB levels at the end of the subjective night relative to the end of the subjective day. That effect was further reinforced by artificial depolarization, independently of the time point of depolarization. Furthermore the data indicate that rises in CREB levels are coinciding with the time point of increases of PER levels in the l-LNvs, suggesting CREB being the molecular link between the neuronal electrical state and the molecular clock. Taking together, the results indicate that a temporal depolarization using dTrpA1 is able to significantly phase shift the clock on the behavioral and protein level. An artificial depolarization at the beginning of the subjective night caused phase delays, whereas a depolarization at the end of the subjective night resulted in advances. The activation of all clock neurons caused a PRC that roughly resembled a light-PRC. However, the depolarization of the PDF+ neurons led to a PRC exhibiting a shape that did not resemble that of a light-mediated PRC, indicating the complex processing ability of excitatory and inhibitory input by the circadian clock. Even though this experimental approach is highly artificial, just the exclusion of light-inputs enabled us to draw novel conclusions on the network communication and its light input pathways.},
  subject      = {Chronobiologie},
  language  = {en}
}
@phdthesis{Gershberg2016,
  author    = {Gershberg, Jana},
  title     = {Self-assembled Perylene Bisimide Dimers and their Interaction with Double-stranded DNA},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136725},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The self-assembly of molecules based on π-π-interactions and hydrogen bonding is of significant importance in nature. These processes enable the formation of complex supramolecular structures with diverse functions. For the transfer of the concepts from nature to artificial supramolecular structures, a basic understanding of those processes is needed. For this purpose, π-conjugated aromatic molecules with an easy synthetic access are suitable as their functionalities can be changed effortless. Perylene bisimide (PBIs) dyes are attractive candidates since they fulfill these requirements owing to their tendency to self-assemble in solution due to their large aromatic π-surfaces. Furthermore, the changes of the optical properties (for instance absorption, emission or circular dichroism) of PBI dyes, caused by their self-assembly, are easy to study experimentally. Structural variations of PBI dyes including additional non-covalent interactions, such as hydro-gen bonding, enable to direct their self-assembly process. Thus, the formation of interesting su-pramolecular structures of PBI dyes could be realized, although, often of undefined size. The aim of this thesis was to develop strategies to restrict the aggregate size of PBI dyes. Therefore, de-fined structural features of PBI molecules were combined and a variation of external influences such as solvent and concentration included. Furthermore, DNA was utilized as a template for the limitation of the aggregate size of PBI dyes. Chapters 1 and 2 provide general information and describe examples from literature which are necessary to understand the following experimental work. The first chapter is based on the inter-actions of various molecules with DNA. Therefore, DNA is considered as a supramolecular biom-acromolecule containing specific structural and functional features to interact with small mole-cules. Afterwards, the main interaction modes of small molecules with DNA such as electrostatic interaction, intercalation and groove binding with corresponding examples are discussed. Among all techniques applied to study the interaction of ligands with DNA, UV/Vis absorption, fluores-cence and circular dichroism spectroscopy were described in detail. At the end of this chapter, examples of already pre-associated systems showing interactions with DNA are presented. The second chapter is focused on the determination and mathematic evaluation of the self-assembly processes. The simplest models such as monomer-dimer and isodesmic model are de-scribed and supplemented by examples. Furthermore, the simplest modification of the isodesmic model, the K2-K model, is presented. Additionally, experimental problems, which may arise dur-ing the investigations of the self-assembly processes, are addressed. For the description of the entire self-assembly process, a sufficiently large concentration range and an appropriate measure-ment method that is sensitive in this concentration range is necessary. Furthermore, the full transi-tion from the monomeric to the aggregated species has to be spectroscopically ascertainable. This enables an accurate mathematic evaluation of the self-assembly process and provides meaningful binding constants. The self-assembly pathway can be controlled by the variation of solvent, con-centration or temperature. However, this pathway can also be directed by a rational design of the molecular structure of the considered system. For example, a specific interplay of π-π-interactions and hydrogen bonding may promote isodesmic as well as cooperative growth into large struc-tures. The main focus of this thesis is to develop strategies to control the aggregate size of PBI dyes (Chapter 3). For this purpose, a PBI scaffold was designed which contains hydrogen bonding amide functions at the imide positions derived from the amino acid L-alanine and solubilizing side groups in the periphery (Figure 81). The variations of the residues R/R' range from didodecylox-yphenyl, didodecylphenyl, dioligo(ethylene glycol)phenyl to branched and linear alkyl chains. The most extensive study of the aggregation behavior was performed for the PBI dye 5. Concen-tration-dependent 1H NMR and UV/Vis absorption measurements clearly revealed the formation of dimers in chloroform. Further investigations by means of 2D NMR, VPO and ITC confirmed the exclusive presence of dimer aggregates of PBI 5 in the investigated concentration range. Mo-lecular modelling studies, supported by NMR and FT-IR experiments, provided structural reasons for the absence of further growth into larger aggregates. The specific combination of π-π interac-tions and hydrogen bonds between the NH groups of the amide groups and the carbonyl oxygen atoms of the PBI core are decisive for the formation of the discrete dimer stack (see Figure 82). The investigations of the aggregation behavior of PBIs 6-9 were less extensive but consistent with the results obtained for PBI 5. However, the determined binding constants vary over a considera-ble range of 1.1 x 102 M-1 (PBI 8) to 1.4 x 104 M-1 (PBI 5). These differences could be attributed to structural variations of the dyes. The electron-rich phenyl substituent promoted the aggregation tendency of PBIs 5-7 compared with 8 and 9 that carry only alkyl side chains. Thus, the π-π in-teractions of bay-unsubstituted PBI cores in combination with hydrogen bonding of the amide functions control the formation of discrete dimers of these PBI dyes. The variation of conditions, such as solvent, change the aggregation behavior of PBI dyes. In the solvents toluene and/or methylcyclohexane, anti-cooperative growth into larger aggregates of PBI 5 was observed (Chapter 4). The important feature of this self-assembly process is the absence of isosbestic points over the whole concentration range in the UV/Vis absorption measurements. The preference for the dimeric species of PBI 5 remained in both solvents as well as in mixtures of them, but upon increasing the concentration these dimers self-assemble into larger aggregates. An important feature of the self-assembly process is the preferred formation of even-numbered aggregates compared to the odd-numbered ones (see Figure 83). Although, the conventional K2-K model provides plausible binding constants, it is not capable to describe the aggregation behavior adequately, since it considers a continuous size distribution. The gradual aggregation process over dimers, tetramers, hexamers, etc. was therefore analyzed with a newly developed K2-K model for anti-cooperative supramolecular polymerization. By the global analysis of the UV/Vis absorption spectra a very good agreement between the experimental and simulated spectra, which were based on the new K2-K model, was obtained. Furthermore, the calculated UV/Vis absorption spectra of a dimer and an aggregate highlighted the most important structural differences. The absorption spectrum of the dimer still has a pronounced vibronic structure which gets lost in the spectrum of the aggregate. In another part of this work, a series of water soluble PBI dyes were described which contain similar PBI scaffolds as PBIs 5-8 (Chapter 5). These PBI dyes self-assemble into similar dimer aggregates in water due to their positively charged side chains causing electrostatic repulsion be-tween the molecules (see Figure 84). Here, however, the self-assembly behavior has not been studied thoroughly in water due to the similarities of already reported PBI dyes. Instead, the focus here is on the characterization of the interactions of these dyes with DNA/RNA. The comprehensive studies using thermal denaturation experiments showed the high stability of these PBI/polynucleotide complexes. The spermine-functionalized PBI dyes having six positive charges showed strong interactions with DNA/RNA which was expressed in a signif-icant increase of the melting temperatures of DNA/RNA (ΔTm values between 7 and > 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85).},
  subject      = {Perylentetracarbons{\"a}urederivate},
  language  = {en}
}
@phdthesis{Ceymann2016,
  author    = {Ceymann, Harald},
  title     = {Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136850},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance.},
  subject      = {Squaraine},
  language  = {en}
}
@phdthesis{Zott2016,
  author    = {Zott, Maximilian},
  title     = {Extreme Value Theory in Higher Dimensions - Max-Stable Processes and Multivariate Records},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136614},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Die Extremwerttheorie behandelt die stochastische Modellierung seltener und extremer Ereignisse. W{\"a}hrend fundamentale Theorien in der klassischen Stochastik, wie etwa die Gesetze der großen Zahlen oder der zentrale Grenzwertsatz das asymptotische Verhalten der Summe von Zufallsvariablen untersucht, liegt in der Extremwerttheorie der Fokus auf dem Maximum oder dem Minimum einer Menge von Beobachtungen. Die Grenzverteilung des normierten Stichprobenmaximums unter einer Folge von unabh{\"a}ngigen und identisch verteilten Zufallsvariablen kann durch sogenannte max-stabile Verteilungen charakterisiert werden. In dieser Dissertation werden verschiedene Aspekte der Theorie der max-stabilen Zufallsvektoren und stochastischen Prozesse behandelt. Insbesondere wird der Begriff der 'Differenzierbarkeit in Verteilung' eines max-stabilen Prozesses eingef{\"u}hrt und untersucht. Ferner werden 'verallgemeinerte max-lineare Modelle' eingef{\"u}hrt, um einen bekannten max-stabilen Zufallsvektor durch einen max-stabilen Prozess zu interpolieren. Dar{\"u}ber hinaus wird der Zusammenhang von extremwerttheoretischen Methoden mit der Theorie der multivariaten Rekorde hergestellt. Insbesondere werden sogenannte 'vollst{\"a}ndige' und 'einfache' Rekorde eingef{\"u}hrt, und deren asymptotisches Verhalten untersucht.},
  subject      = {Stochastischer Prozess},
  language  = {en}
}
@phdthesis{Schindele2016,
  author    = {Schindele, Andreas},
  title     = {Proximal methods in medical image reconstruction and in nonsmooth optimal control of partial differential equations},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136569},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Proximal methods are iterative optimization techniques for functionals, J = J1 + J2, consisting of a differentiable part J2 and a possibly nondifferentiable part J1. In this thesis proximal methods for finite- and infinite-dimensional optimization problems are discussed. In finite dimensions, they solve l1- and TV-minimization problems that are effectively applied to image reconstruction in magnetic resonance imaging (MRI). Convergence of these methods in this setting is proved. The proposed proximal scheme is compared to a split proximal scheme and it achieves a better signal-to-noise ratio. In addition, an application that uses parallel imaging is presented. In infinite dimensions, these methods are discussed to solve nonsmooth linear and bilinear elliptic and parabolic optimal control problems. In particular, fast convergence of these methods is proved. Furthermore, for benchmarking purposes, truncated proximal schemes are compared to an inexact semismooth Newton method. Results of numerical experiments are presented to demonstrate the computational effectiveness of our proximal schemes that need less computation time than the semismooth Newton method in most cases. Results of numerical experiments are presented that successfully validate the theoretical estimates.},
  subject      = {Optimale Kontrolle},
  language  = {en}
}
@phdthesis{Koenig2016,
  author    = {K{\"o}nig, Sebastian},
  title     = {Spatially selective visual attention in Drosophila melanogaster},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-134452},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Finding the right behavior at the right time is one of the major tasks of brains. In a natural scenery there is often an abundance of stimuli present and the brain has to separate the relevant from the irrelevant ones. Selective visual attention (SVA) is a property of higher visual systems that achieves this separation, as it allows to '[…] focus on one source of sensory input to the exclusion of others' (Luck and Mangun, 1996). There are probably several forms of SVA depending upon the criteria used for the separation, such as salience, color, location in space, novelty, or motion. Many studies have investigated SVA in humans and non-human primates. However, complex functions like attention were initially not expected to be already implemented in the brains of simple organisms like Drosophila. After a first demonstration of selective attention in the fly (Wolf and Heisenberg, 1980), it took some time until other studies included attentional mechanisms in their argumentation to explain certain behaviors of Drosophila. However, their definition and characterization of attention differed and often was ambiguous. Here, one particular form, spatially selective visual attention in the fly Drosophila is investigated. It has been shown earlier that the fly spontaneously may restrict its behavioral responses in stationary flight to the visual stimuli on one side of the visual field. On the basis of experiments of Sareen et al., (2011) it has been conjectured that the fly has a focus of attention (FoA) and that the fly responds to the visual stimuli within this area of the visual field. Whether the FoA is the adequate concept for this spatial property of SVA in the fly needs to be further discussed and is a subject also of the present study. At this stage, the concept will be used in the description of the new results expanding the characterization of SVA. This study continued the investigation of SVA during tethered flight with variable but controlled visual input and an automated primary data evaluation. This standardized paradigm allowed for analysis of wild-type behavior as well as for a comparison of several mutant and pharmacologically manipulated strains to the wild-type. Some properties of human SVA like the occurrence of externally as well as internally caused shifts of attention were found in Drosophila and it could be shown, that SVA in the fly can be externally guided and has an attention span. Additionally, a neurotransmitter and proteins, which play a significant role in SVA were discovered. Based on this, the genetic tools available for Drosophila provided the means to a first examination of cells and circuits involved in SVA. Finally, the free walk behavior of flies that had been shown to have compromised SVA was characterized. The results suggested that the observed phenotypes of SVA were not behavior specific. Covert shifts of the FoA were investigated. The FoA can be externally guided by visual cues to one or the other side of the visual field and even after the cue has disappeared it remains there for <4s. An intriguing finding of this study is the fact, that the quality of the cue determines whether it is attractive or repellent. For example a cue can be changed from being repellent (negative) to being attractive (positive) by changing its oscillation amplitude from 4° to 2°. Testing the effectiveness of cues in the upper and lower visual field separately, revealed that the perception of a cue by the fly is not exclusively based on a sum of its specifications. Because positive cueing did not have an after-effect in each of the two half-fields alone, but did so if the cue was shown in both, the fly seems to evaluate the cue for each combination of parameters specifically. Whether this evaluation of the cue changed on a trial-to-trial basis or if the cue in some cases failed to shift the FoA can at this point not be determined. Looking at the responses of the fly to the displacement of a black vertical stripe showed that they can be categorized as no responses, syn-directional responses (following the direction of motion of the stripe) and anti-directional responses (in the opposite direction of the motion of the stripe). The yaw-torque patterns of the latter bared similarities with spontaneous body saccades and they most likely represented escape attempts of the fly. Syn-directional responses, however, were genuine object responses, distinguishable by a longer latency until they were elicited and a larger amplitude. These properties as well as the distribution of response polarities were not influenced by the presence or absence of a cue. When two stripes were displaced simultaneously in opposite directions the rate of no responses increased in comparison to the displacement of a single stripe. If one of the stripes was cued, both, the responses towards and away from the side of cue resembled the syn-directional responses. Significant progress was made with the elucidation of the neuronal underpinnings of SVA. Ablation of the mushroom bodies (MB) demonstrated their requirement for SVA. Furthermore, it was shown that dopamine signaling has to be balanced between too much and too little. Either inhibiting the synthesis of dopamine or its re-uptake at the synapse via the dDAT impaired the flies' susceptibility to cueing. Using the Gal4/UAS system, cell specific expression or knockdown of the dDAT was used to scrutinize the role of MB sub-compartments in SVA. The αβ-lobes turned out to be necessary and sufficient to maintain SVA. The Gal4-line c708a labels only a subset of Kenyon cells (KC) within the αβ-lobes, αβposterior. These cells stand out, because of (A) the mesh-like arrangement of their fibers within the lobes and (B) the fact that unlike the other KCs they bypass the calyx and thereby the main source of olfactory input to the MBs, forming connections only in the posterior accessory calyx (Tanaka et al., 2008). This structure receives no or only marginal olfactory input, suggesting for it a role in tasks other than olfaction. This study shows their requirement in a visual task by demonstrating that they are necessary to uphold SVA. Restoring dDAT function in these approximately only 90 cells was probably insufficient to lower the dopamine concentration at the relevant synapses and hence a rescue failed. Alternatively, the processes mediating SVA at the αβ-lobes might require an interplay between all of their KCs. In conclusion, the results provide an initial point for future research to fully understand the localization of and circuitry required for SVA in the brain. In the experiments described so far, attention has been externally guided. However, flies are also able to internally shift their FoA without any cues from the outside world. In a set of 60 consecutive simultaneous displacements of two stripes, they were more likely to produce a response with the same polarity as the preceding one than a random polarity selection predicted. This suggested a dwelling of the FoA on one side of the visual field. Assuming that each response was influenced by the previous one in a way that the probability to repeat the response polarity was increased by a certain factor (dwelling factor, df), a random selection of response type including a df was computed. Implementation of the df removed the difference between observed probability of polarity repetition and the one suggested by random selection. When the interval between displacements was iteratively increased to 5s, no significant df could be detected anymore for pauses longer than 4s. In conclusion, Drosophila has an attention span of approximately 4s. Flies with a mutation in the radish gene expressed no after-effect of cueing and had a shortened attention span of about 1s. The dDAT inhibitor methylphenidate is able to rescue the first, but does not affect the latter phenotype. Probably, radish is differently involved in the two mechanisms. This study showed, that endogenous (covert) shifts of spatially selective visual attention in the fly Drosophila can be internally and externally guided. The variables determining the quality of a cue turned out to be multifaceted and a more systematic approach is needed for a better understanding of what property or feature of the cue changes the way it is evaluated by the fly. A first step has been made to demonstrate that SVA is a fundamental process and compromising it can influence the characteristics of other behaviors like walking. The existence of an attention span, the dependence of SVA on dopamine as well as the susceptibility to pharmacological manipulations, which in humans are used to treat respective diseases, point towards striking similarities between SVA in humans and Drosophila.},
  subject      = {Taufliege},
  language  = {en}
}
@phdthesis{Gradmann2016,
  author    = {Gradmann, Rena},
  title     = {Analysis of Historical Islamic Glazes and the Development of a Substitution Material},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136233},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {11 Conclusion 11.1 Glaze compositions Glazes from tiles of imposing Islamic buildings and some tableware glazes of the medieval epoch in Central Asia, the Middle East, Asia Minor, and North Africa are analysed regarding their main composition and colouring agents. Three major production recipes can be distinguished, i.e. alkali glazes, alkali lead glazes, and lead glazes. In the work of Tite (2011), Islamic glazes from Egypt, Iran, Iraq, and Syria are subdivided into four groups of composition, being partly consistent with those of this work. The alkali lime glazes with <2 wt\% PbO correspond to the alkali glazes, but with higher content of CaO. The second and third group of low lead alkali and lead alkali glazes (2-10 wt\% PbO and 10-35 wt\% PbO) can be subsumed to the alkali lead group described here. Tite´s high lead group has PbO contents >35 wt\% and is comparable to the lead glazes (>30 wt\% PbO) of this study. The lead and the alkali oxides serve as a flux for the lowering the melting point. In the interaction of ceramic body and glaze, primarily an influence from Si, Al, and K is observed in the line scans from the cross section of ceramic and glaze. However, the input of ceramic material doesn't seem to be critical for the classification of glazes according to their alkali and alkali lead compositions. In every epoch and locality, except of the Ilkhanate dynasty in Iran, lead glaze samples can be verified. This is also observed in previous investigations e.g. from medieval Iraq, Jordan and Iran (McCarthy, 1996; Al-Saad, 2002; Holakooei et al., 2014). In the Moroccan and Bulgarian glazes, lead seems to be the only important flux. In part, the lead flux is supplemented by additional alkali contents. The lack of alkali and alkali lead glazes in Bulgarian and Moroccan glazes (assuming that the Ottoman alkali lead glazes are imported tableware) seems to affect the regions with Roman-influenced history and with geographical distance to the Near East alkali flux tradition. For the alkali lead glazes and alkali glazes, the overall characteristic is sodium dominated, although the absolute soda values are in part surprisingly low. Samples from Bukhara, Takht-i-Suleiman and the Turkish localities have the highest, but still moderate Na2O values up to 15 wt\%, compared to other analyses from e.g. India (Gill \& Rehren, 2011). The source of the alkali flux is either mineral natron or plant ash. The source can be determined regarding the MgO values, limited to 1.3 wt\% in mineral natron and exceeding 2.0 wt\% in the case of plant ashes. In the samples of the present study, the K2O component is not suitable for the indication of the flux-relevant alkali source due to its broad scattering. The P2O5 contents are also enhanced in the plant ash compositions but the data set is not sufficient for statistical evaluation. An influence of the ceramic body on the glaze composition is observed only for SiO2, Al2O3, and K2O in quartz frit ceramics with slight K-feldspar content. The earliest Uzbek tableware glazes from the 10th-11th century (Seljuq period) were generally produced using a lead flux. The same applies to part of the Uzbek tile glazes which were produced between the 13th and 16th century. In Iran, glazes from the 12th century (Khwarezmid period) are lead glazes, but also alkali-fluxed glazes with mineral natron characteristics can be found. Although the production of lead-rich glazes was established from the 8th-9th century on in Iraq, Syria, and Egypt (Henshaw, 2010; Tite et al., 2011), alkali glazes are found in almost all regions except of Bulgaria and Morocco. Plant ash-fluxed alkali glazes are found in 13th century glazes from Takht-i-Suleiman. The plant ash flux technology is assumed to be continuously used in Mesopotamia, Iran, and Central Asia (Sayre \& Smith, 1974; Henderson, 2009), but it could be shown that a parallel use of mineral natron parallel existed in the alkali glaze production from the 12th-15th century from Uzbekistan to Afghanistan. Mineral natron characteristics are also reported by Mason (2004) for Syrian and Iranian alkali glazes on lustre ware of the 8th-14th century. Tile glazes with partly mineral natron compositions are found in the Mughal architectural glazes from the 14th- 17th century from India (Gill et al., 2014). Alkali and alkali lead tile glazes from Samarkand from the 13th century (Mongolian period) have mineral natron flux characteristics, but samples from the 15th century (Timurid period) show plant ash signature. Alkali fluxed Uzbek glazes from Bukhara from the 16th century (Sheibanid dynasty) are also made by plant ash flux and are subdivided into two groups with high and low sodium oxide content. The Afghan alkali glazes have sodium oxide contents similar to the sodium-poor Uzbek subgroup, which points to a possible exchange of glaze makers or glaze making technology from Uzbekistan and Afghanistan in the 15th-17th century. Regarding the extensive exchange of Timurid craftsmen in Central Asia, this option seems to be even more likely (Golombek, 1996). One sample from the 15th century from Afghanistan with mineral natron reveals that this material was parallel used in these centuries. Concerning the colouring of the glazes, it has to be distinguished between pigments and colouring ions which are incorporated in the glassy matrix. The colouring agents for translucent glazes are cations of various transition metals. As ions, Co2+ (blue), Cu2+ (green in a lead rich matrix), Fe3+ (brown/black), Mn4+ (brown/black) and Mn3+ (violet) are determined by EPMA. For opaque yellow, white, and turquoise glazes, different pigments were used. The crystalline pigments are investigated by a µ XRD2 device with the result of SnO2, SiO2, and PbSiO4 as whitening agents. PbSiO4 and Pb2Sn2O6 are found in the yellow glaze, from which only the lead tin oxide causes the yellow colour. In the black glazes, different Cr-rich pigments, Cu-Cr-Mn-oxides and iron containing clinopyroxenes are found, even in samples of the same period and region. Cr-rich particles are also detected in two turquoise Afghan glazes from the 15th and 16th century. The use of the ions of Fe, Cu, Co, Cr, and Mn seems to be widely common in the Islamic glazes and corresponds to the described colouring agents in e.g. the study of Tite (2011). The use of opacifying SnO2 particles is widespread as it is reported from different Islamic glazes from Iraq, Iran, Egypt, and Syria (Henshaw, 2010; O´Kane, 2011; Tite, 2011). The colouring agents are known already from former, e.g. Egyptian, Roman and pre-islamic periods, but especially SnO2 pigments became increasingly widespread in the Islamic glazing tradition. The use of yellow and black pigments instead varies already within the buildings from Bukhara from Cr crystals and clino-pyroxenes in the mosque Khoja Zainuddin to a Cu-Cr-Mn-oxide in the madrassa Mir-i Arab of the same epoch. Regarding the matrix compositions connected with the colouring, a certain assignment within the different locations and epochs can be seen. It is noticeable that e.g. the content of lead in turquoise glazes in Uzbekistan is in the range of 0.0-9.2 wt\% Pb, whereas blue glazes are mostly alkali ones with PbO contents <2.0 wt\%. The turquoise glazes show, that this restriction is not influenced by any defaults of availability and processability. The assumption of common addition of lead and tin to the glaze, which is already described for Iranian glazes of the 13th century (Allan et al., 1973) cannot be confirmed by correlations of tin and lead oxide in the compositions. 11.2 Portable XRF measurement With the p-XRF, semi-quantitative information about the major element compositions is generated. The depth of the detectable signals depends on the analysed sample setup. The p-XRF data are collected with the XL3 Hybrid device of the company Analyticon Instruments. In the comparison of p-XRF results of the "mining" program from Uzbek glazes with EPMA results, the same major composition groups can be distinguished. The Moroccan glazes, all lead rich, are measured with the "mining" as well as with the "soil" program, revealing a better performance in the "mining" measurements. The deviations are nevertheless high, because of the high lead contents, which make the calculation of matrix correction difficult. The measurement of the colouring oxides MnO2, CoO, and CuO is satisfying with the internal calibration of the device and even improved with the "mining" program measurement, if compared to the results of the "soil" program. The measurements of glaze imitations lead to better results than that of bulk glass. This can be attributed to the smoother surface texture. In spite of the accuracy limits in the measurements of particular elements in glazes, the classification of flux composition into three groups could be confirmed with the p XRF analysis. The measurement precision is therefore sufficient for the semi-quantitative analysis of the flux characteristic of glazes. Especially for the on-site measurement of large sample quantities on historical buildings, the device is a suitable tool. 11.3 Restoration material The ORMOCER® fulfils the requirements of stability, reversibility, and transparency, which are imposed to a modern restoration material. As pigments, historically coloured glass, cobalt blue, Egyptian blue, lead tin yellow, manganese violet, iron oxide, copper oxide, and cassiterite were used. The metal compounds have higher colour intensities than the pigments of coloured glass. It has to be considered that the proportion of ORMOCER® in the batch must be high enough (70 vol\%) to guarantee the ORMOCER® properties of weathering and mechanical stability. The adhesion properties of the ORMOCER® and the homogeneity of the mixture are the best in a fraction of max. 30 vol\% particles per ORMOCER®. With integrated particles, the ORMOCER® G materials show homogeneous coatings, whereas the particles in the ORMCOER® E show more agglomeration. In the sedimentation and weathering experiments, the use of an ultrasonic finger in combination with a roller mill is favourable compared to the treatment with bead grinding mill. The treatments with ultrasonic finger and roller mill result in less sedimentation and better adhesion of the dispersions. The treatment of the dispersions in the bead grinding mill does not result in sufficient adhesion, certainly due to the sedimentation behaviour and a congregation of particles on the bottom of the coating. The modification of dispersed nano-particles by 3-methacryl-oxypropyltrimethoxysilan leads to a further homogenization in the sedimentation tests. It is therefore approved for the use in coloured glaze supplements. In weathered coatings of nano-particle compounds, the surface modification shows certainly no enhancement of stability. The treatment of pigmented coatings with an additional layer of pure ORMOCER® results in a bright and transparent appearing, which is closer to the original optical appearance of the glaze. A long-time test application on a historical building will be the next step to validate the suitability of the restoration material.},
  subject      = {Glasur},
  language  = {en}
}