@phdthesis{Scheibner2007, author = {Scheibner, Ralf}, title = {Thermoelectric Properties of Few-Electron Quantum Dots}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-26699}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {This thesis presents an experimental study of the thermoelectrical properties of semiconductor quantum dots (QD). The measurements give information about the interplay between first order tunneling and macroscopic quantum tunneling transport effects in the presence of thermal gradients by the direct comparison of the thermoelectric response and the energy spectrum of the QD. The aim of the thesis is to contribute to the understanding of the charge and spin transport in few-electron quantum dots with respect to potential applications in future quantum computing devices. It also gives new insight into the field of low temperature thermoelectricity. The investigated QDs were defined electrostatically in a two dimensional electron gas (2DEG) formed with a GaAs/(Al,Ga)As heterostructure by means of metallic gate electrodes on top of the heterostructure. Negative voltages with respect to the potential of the 2DEG applied to the gate electrodes were used to deplete the electron gas below them and to form an isolated island of electron gas in the 2DEG which contains a few ten electrons. This QD was electrically connected to the 2DEG via two tunneling barriers. A special electron heating technique was used to create a temperature difference between the two connecting reservoirs across the QD. The resulting thermoelectric voltage was used to study the charge and spin transport processes with respect to the discrete energy spectrum and the magnetic properties of the QD. Such a two dimensional island usually exhibits a discrete energy spectrum, which is comparable to that of atoms. At temperatures below a few degrees Kelvin, the electrostatic charging energy of the QDs exceeds the thermal activation energy of the electrons in the leads, and the transport of electrons through the QD is dominated by electron-electron interaction effects. The measurements clarify the overall line shape of thermopower oscillations and the observed fine structure as well as additional spin effects in the thermoelectrical transport. The observations demonstrate that it is possible to control and optimize the strength and direction of the electronic heat flow on the scale of a single impurity and create spin-correlated thermoelectric transport in nanostructures, where the experimenter has a close control of the exact transport conditions. The results support the assumption that the performance of thermoelectric devices can be enhanced by the adjustment of the QD energy levels and by exploiting the properties of the spin-correlated charge transport via localized, spin-degenerate impurity states. Within this context, spin entropy has been identified as a driving force for the thermoelectric transport in the spin-correlated transport regime in addition to the kinetic contributions. Fundamental considerations, which are based on simple model assumptions, suggest that spin entropy plays an important role in the presence of charge valence fluctuations in the QD. The presented model gives an adequate starting point for future quantitative analysis of the thermoelectricity in the spin-correlated transport regime. These future studies might cover the physics in the limit of single electron QDs or the physics of more complex structures such as QD molecules as well as QD chains. In particular, it should be noted that the experimental investigations of the thermopower of few-electron QDs address questions concerning the entropy transport and entropy production with respect to single-bit information processing operations. These questions are of fundamental physical interest due to their close connection to the problem of minimal energy requirements in communication, and thus ultimately to the so called "Maxwell's demon" with respect to the second law of thermodynamics.}, subject = {Quantenpunkt}, language = {en} } @phdthesis{Koenig2007, author = {K{\"o}nig, Markus}, title = {Spin-related transport phenomena in HgTe-based quantum well structures}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-27301}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Within the scope of this thesis, spin related transport phenomena have been investigated in HgTe/HgCdTe quantum well structures. This material exhibits peculiar band structure properties, which result in a strong spin-orbit interaction of the Rashba type. An inverted band structure, i.e., a reversed ordering of the energy states in comparison to common semiconductors, is obtained for quantum well layers above a critical thickness. Furthermore, the band structure properties can be controlled in the experiments by moderate gate voltages. Most prominently, the type of carriers in HgTe quantum wells can be changed from n to p due to the narrow energy gap. Along with the inverted band structure, this unique transition is the basis for the demonstration of the Quantum Spin Hall state, which is characterized by the existence of two one-dimensional spin-polarized edge states propagating in opposite directions, while the Fermi level in the bulk is in the energy gap. Since elastic scattering is suppressed by time reversal symmetry, a quantized conductance for charge and spin transport is predicted. Our experiments provide the first experimental demonstration of the QSH state. For samples with characteristic dimensions below the inelastic mean free path, charge conductance close to the expected value of 2e^2/h has been observed. Strong indication for the edge state transport was found in the experiments as well. For large samples, potential fluctuations lead to the appearance of local n-conducting regions which are considered to be the dominant source of backscattering. When time reversal symmetry is broken in a magnetic field, elastic scattering becomes possible and conductance is significantly suppressed. The suppression relies on a dominant orbital effect in a perpendicular field and a smaller Zeeman-like effect present for any field direction. For large perpendicular fields, a re-entrant quantum Hall state appears. This unique property is directly related to the non-trivial QSH insulator state. While clear evidence for the properties of charge transport was provided, the spin properties could not be addressed. This might be the goal of future experiments. In another set of experiments, the intrinsic spin Hall effect was studied. Its investigation was motivated by the possibility to create and to detect pure spin currents and spin accumulation. A non-local charging attributed to the SHE has been observed in a p-type H-shaped structure with large SO interaction, providing the first purely electrical demonstration of the SHE in a semiconductor system. A possibly more direct way to study the spin Hall effects opens up when the spin properties of the QSH edge states are taken into account. Then, the QSH edge states can be used either as an injector or a detector of spin polarization, depending on the actual configuration of the device. The experimental results indicate the existence of both intrinsic SHE and the inverse SHE independently of each other. If a spin-polarized current is injected from the QSH states into a region with Rashba SO interaction, the precession of the spin can been observed via the SHE. Both the spin injection and precession might be used for the realization of a spin-FET similar to the one proposed by Datta and Das. Another approach for the realization of a spin-based FET relies on a spin-interference device, in which the transmission is controlled via the Aharonov-Casher phase and the Berry phase, both due to the SO interaction. In the presented experiments, ring structures with tuneable SO coupling were studied. A complex interference pattern is observed as a function of external magnetic field and gate voltage. The dependence on the Rashba splitting is attributed to the Aharonov-Casher phase, whereas effects due to the Berry phase remain unresolved. This interpretation is confirmed by theoretical calculations, where multi-channel transport through the device has been assumed in agreement with the experimental results. Thus, our experiments provide the first direct observation of the AC effect in semiconductor structures. In conclusion, HgTe quantum well structures have proven to be an excellent template for studying spin-related transport phenomena: The QSHE relies on the peculiar band structure of the material and the existence of both the SHE and the AC effect is a consequence of the substantial spin-orbit interaction. While convincing results have been obtained for the various effects, several questions can not be fully answered yet. Some of them may be addressed by more extensive studies on devices already available. Other issues, however, ask, e.g., for further advances in sample fabrication or new approaches by different measurements techniques. Thus, future experiments may provide new, compelling insights for both the effects discussed in this thesis and, more generally, other spin-orbit related transport properties.}, subject = {Spin-Bahn-Wechselwirkung}, language = {en} } @phdthesis{Galmbacher2007, author = {Galmbacher, Matthias}, title = {Lernen mit dynamisch-ikonischen Repr{\"a}sentationen aufgezeigt an Inhalten zur Mechanik}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-29271}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Im Physikunterricht wurde lange Zeit die Bedeutung quantitativer Zusammenh{\"a}nge f{\"u}r das Physiklernen {\"u}berbewertet, qualitative Zusammenh{\"a}nge spielten dagegen eine eher untergeordnete Rolle. Dies f{\"u}hrte dazu, dass das Wissen der Sch{\"u}ler zumeist ober­fl{\"a}ch­lich blieb und nicht auf neue Situationen angewendet werden konnte. TIMSS und Pisa offenbarten diese Schwierigkeiten. In den Abschlussberichten wurde kritisiert, dass die Sch{\"u}ler kaum in der Lage seien, Lernstoff zu transferieren oder pro­blem­l{\"o}send zu denken. Um physikalische Abl{\"a}ufe deuten und entsprechende Probleme l{\"o}sen zu k{\"o}nnen, ist qua­litativ-konzeptuelles Wissen n{\"o}tig. Dieses kann, wie Forschungs­ergebnisse belegen, am besten durch die konstruktivistisch motivierte Gestaltung von Lern­situationen sowie durch die Inte­gration externer Repr{\"a}sentationen von Versuchs­aussagen in den Schul­unter­richt er­reicht werden. Eine konkrete Umsetzung dieser Bedingungen stellt der Ein­satz rechner­gest{\"u}tzter Experimente dar, der heutzutage ohne allzu großen technischen Aufwand rea­lisiert werden kann. Diese Experimente erleichtern es dem Lernenden, durch den direk­ten Umgang mit realen Abl{\"a}ufen, physikalische Konzepte zu erschließen und somit qua­litative Zusammenh{\"a}nge zu verstehen. W{\"a}hrend man lange Zeit von einer grunds{\"a}tzlichen Lernwirksamkeit animierter Lern­um­gebungen ausging, zeigen dagegen neuere Untersuchungen eher Gegenteiliges auf. Sch{\"u}ler m{\"u}ssen offensichtlich erst lernen, wie mit multicodierten Re­pr{\"a}­sentationen zu arbeiten ist. Die vorliegende Arbeit will einen Beitrag dazu leisten, he­raus­zufinden, wie lernwirksam sogenannte dynamisch-ikonische Repr{\"a}sentationen (DIR) sind, die physikalische Gr{\"o}ßen vor dem Hintergrund konkreter Versuchsabl{\"a}ufe visuali­sieren. Dazu bearbeiteten im Rahmen einer DFG-Studie insgesamt 110 Sch{\"u}ler jeweils 16 Projekte, in denen mechanische Konzepte (Ort, Geschwindigkeit, Beschleu­nigung und Kraft) aufgegriffen wurden. Es zeigte sich, dass die Probanden mit den ein­ge­setzten DIR nicht erfolgreicher lernen konnten als ver­gleich­bare Sch{\"u}ler, die die gleichen Lerninhalte ohne die Unter­st{\"u}tzung der DIR erarbeiteten. Im Gegen­teil: Sch{\"u}ler mit einem geringen visuellen Vorstellungsverm{\"o}gen schnitten aufgrund der Darbietung einer zus{\"a}tzlichen Codierung schlechter ab als ihre Mit­sch{\"u}ler. Andererseits belegen Untersuchungen von Blaschke, dass solche Repr{\"a}sen­ta­tionen in der Erarbeitungsphase einer neu entwickelten Unter­richts­kon­zep­tion auch und gerade von schw{\"a}cheren Sch{\"u}lern konstruktiv zum Wissens­erwerb genutzt werden konnten. Es scheint also, dass die Lerner zun{\"a}chst Hilfe beim Umgang mit neuartigen Re­pr{\"a}­sen­ta­tions­formen ben{\"o}tigen, bevor sie diese f{\"u}r den weiteren Aufbau ad{\"a}qua­ter physi­ka­lischer Modelle nutzen k{\"o}nnen. Eine experimentelle Unter­suchung mit Sch{\"u}­lern der 10. Jahrgangsstufe best{\"a}tigte diese Vermutung. Hier lernten 24 Probanden in zwei Gruppen die mechanischen Konzepte zu Ort, Geschwin­dig­keit und Beschleunigung kennen, bevor sie im Unter­richt behandelt wurden. W{\"a}hrend die Teil­nehmer der ersten Gruppe nur die Simulationen von Bewegungsabl{\"a}ufen und die zuge­h{\"o}rigen Liniendiagramme sahen, wurden f{\"u}r die zweite Gruppe unterst{\"u}tzend DIR eingesetzt, die den Zusammenhang von Bewe­gungs­ablauf und Linien­diagramm veranschaulichen sollten. In beiden Gruppen war es den Probanden m{\"o}glich, Fragen zu stellen und Hilfe von einem Tutor zu erhalten. Die Ergebnis­se zeigten auf, dass es den Sch{\"u}lern durch diese Maßnahme erm{\"o}glicht wurde, die DIR erfolgreich zum Wissens­er­werb einzusetzen und sig­nifikant besser abzuschneiden als die Teilnehmer in der Kon­troll­­gruppe. In einer weiteren Untersuchung wurde abschließend der Frage nachgegangen, ob DIR unter Anleitung eines Tutors eventuell bereits in der Unterstufe sinnvoll eingesetzt werden k{\"o}nnen. Ausgangspunkt dieser {\"U}berlegung war die Tatsache, dass mit der Einf{\"u}hrung des neuen bayerischen G8-Lehrplans wesentliche Inhalte, die Bestand­teil der vorherigen Untersuchungen waren, aus dem Physik­unterricht der 11. Jgst. in die 7. Jahrgangsstufe verlegt wurden. So bot es sich an, mit den Inhalten auch die DIR in der Unterstufe ein­zusetzen. Die Un­tersuchungen einer quasiexperimentellen Feldstudie in zwei siebten Klassen belegten, dass die betrachte­ten Repr{\"a}sentationen beim Aufbau entsprechender Kon­zepte keinesfalls hinderlich, sondern sogar f{\"o}rder­lich sein d{\"u}rften. Denn die Sch{\"u}ler­gruppe, die mit Hilfe der DIR lernte, schnitt im direkten hypothesenpr{\"u}fenden Vergleich mit der Kontrollklasse deutlich besser ab. Ein Kurztest, der die Nachhaltigkeit des Gelernten nach etwa einem Jahr {\"u}berpr{\"u}fen sollte, zeigte zudem auf, dass die Sch{\"u}ler der DIR-Gruppe die Konzepte, die unter Zuhilfenahme der DIR erarbeitet wurden, im Vergleich zu Sch{\"u}lern der Kontrollklasse und zu Sch{\"u}lern aus 11. Klassen insgesamt {\"u}berraschend gut verstanden und behalten hatten.}, subject = {Multimedia}, language = {de} } @phdthesis{Mahapatra2007, author = {Mahapatra, Suddhasatta}, title = {Formation and Properties of Epitaxial CdSe/ZnSe Quantum Dots : Conventional Molecular Beam Epitaxy and Related Techniques}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-32831}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Albeit of high technological import, epitaxial self-assembly of CdSe/ZnSe QDs is non-trivial and still not clearly understood. The origin and attributes of these QDs are significantly different from those of their III-V and group-IV counterparts. For III-V and group-IV heterosystems, QD-formation is assigned to the Stranski Krastanow (SK) transition, wherein elastic relaxation of misfit strain leads to the formation of coherent three-dimensional (3D) islands, from a supercritically strained two-dimensional (2D) epilayer. Unfortunately, this phenomenon is inconspicuous for the CdSe/ZnSe heterosystem. Well-defined 3D islands are not readily formed in conventional molecular beam epitaxial (MBE) growth of CdSe on ZnSe. Consequently, several alternative approaches have been adopted to induce/enhance formation of QDs. This thesis systematically investigates three such alternative approaches, along with conventional MBE, with emphasis on the formation-mechanism of QDs, and optimization of their morphological and optical attributes. It is shown here that no distinct 3D islands are formed in MBE growth of CdSe on ZnSe. The surface of the CdSe layer represents a rough 2D layer, characterized by a dense array of shallow (<1nm) abutting mounds. In capped samples, the CdSe deposit forms an inhomogeneous CdZnSe quantum well (QW)-like structure. This ternary QW consists of local Cd-rich inclusions, which confine excitons three-dimensionally, and act as QDs. The density of such QDs is very high (~ 1012 cm-2). The QDs defined by the composition inhomogeneities of the CdZnSe QW presumably originate from the shallow mounds of the uncapped CdSe surface. By a technique wherein a CdSe layer is grown at a low temperature (TG = 230 °C) and subsequently annealed at a significantly higher temperature (TA =310 °C), tiny but distinct 3D islands are formed. In this work, the mechanism underlying the formation of these islands is reported. While the CdSe deposit forms a quasi-two-dimensional (quasi-2D) layer at TG = 230 °C, subsequent annealing at TA = 310 °C results in a thermally activated "up-climb" of adatoms onto two-dimensional clusters (or precursors) and concomitant nucleation of 3D islands. The areal density of QDs, achieved by this technique, is at least a decade lower than that typical for conventional MBE growth. It is demonstrated that further reduction is possible by delaying the temperature ramp-up to TA. In the second technique, formation of distinct islands is demonstrated by deposition of amorphous selenium (a-Se) onto a 2D CdSe epilayer at room temperature and its subsequent desorption at a higher temperature (TD = 230 °C). Albeit the self-assembled islands are large, they are severely truncated during subsequent capping with ZnSe, presumably due to segregation of Cd and Zn-alloying of the islands. The segregation phenomenon is analyzed in this work and correlated to the optical properties of the QDs. Additionally, very distinct vertical correlation of QDs in QD-superlattices, wherein the first QD-layer is grown by this technique and the subsequent ones by migration enhanced epitaxy (MEE), is reported. The process steps of the third variant technique, developed in course of this work, are very similar to those of the previous one-the only alteration being the substitution of selenium with tellurium as the cap-forming-material. This leads not only to large alteration of the morphological and optical attributes of the QDs, but also to formation of unique self-assembled island-patterns. Oriented dashes, straight and buckled chains of islands, and aligned island-pairs are formed, depending on the thickness of the Te-cap layer. The islands are partially alloyed with Te and emit luminescence at very low energies (down to 1.7 eV at room temperature). The Te cap layer undergoes (poly)crystallization during temperature ramp-up (from room temperature to TD) for desorption. Here, it is shown that the self-assembled patterns of the island-ensembles are determined by the pattern of the grain boundaries of the polycrystalline Te layer. Based on an understanding of the mechanism of pattern formation, a simple and "clean" method for controlled positioning of individual QDs and QD-based extended nanostructures, is proposed in this work. The studies carried out in the framework of this thesis provide not only a deeper insight into the microscopic processes governing the heteroepitaxial self-assembly of CdSe/ZnSe(001) QDs, but also concrete approaches to achieve, optimize, and control several technologically-important features of QD-ensembles. Reduction and control of QD-areal-density, pronounced vertical correlation of distinctly-defined QDs in QD-superlattices, and self-assembly of QD-based extended structures, as demonstrated in this work, might turn out to be beneficial for envisioned applications in information-, and communication-technologies.}, subject = {Nanostruktur}, language = {en} } @phdthesis{Pracht2007, author = {Pracht, Eberhard}, title = {Entwicklung und Optimierung von Bildgebungssequenzen f{\"u}r die 1H-Magnetresonanztomographie der Lunge}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-26398}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {No abstract available}, subject = {NMR-Tomographie}, language = {de} } @phdthesis{Forster2007, author = {Forster, Frank}, title = {Eigenschaften und Modifikation zweidimensionaler Elektronenzust{\"a}nde auf Edelmetallen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-23460}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Im Rahmen dieser Arbeit werden Untersuchungen an zweidimensionalen elektronischen Strukturen von (111)-orientierten Edelmetalloberfl{\"a}chen und deren Beeinflussung durch verschiedene Adsorbate pr{\"a}sentiert. Das Hauptaugenmerk liegt hierbei auf den an Oberfl{\"a}chen lokalisierten Shockley-Zust{\"a}nden von Cu, Ag und Au, deren Banddispersion (Bindungsenergie, Bandmasse und Spin-Bahn-Aufspaltung) sich als sensible Sonde f{\"u}r Oberfl{\"a}chenmodifikationen durch Adsorptionprozesse herausstellt. Winkelaufgel{\"o}ste Photoelektronenspektroskopie erlaubt hierbei den experimentellen Zugang zu bereits feinen Ver{\"a}nderungen der elektronischen Bandstruktur dieser zweidimensionalen Systeme. Verschiedene Mechanismen, die sich an Oberfl{\"a}chen und Adsorbat/Substrat-Grenzfl{\"a}chen abspielen wirken sich in unterschiedlicher Weise auf den Shockley-Zustand aus und werden anhand von geeigneten Modelladsorbatsystemen untersucht. Die experimentellen Ergebnisse werden mit geeigneten Modellen, wie dem Phasenakkumulationsmodell und dem Modell fast freier Elektronen, und teilweise mit ab initio-Rechnungen gem{\"a}ß der Dichtefunktionaltheorie verglichen, was eine Einbettung der Resultate in einen gemeinsamen Kontext erlaubt. So wird der Einfluss der Adsorption von Submonolagen von Na auf den Au-Oberfl{\"a}chenzustand im Hinblick auf die signifikante Austrittsarbeits{\"a}nderung der Oberfl{\"a}che untersucht. Eine systematische Studie der Physisorption von Edelgasen zeigt die Auswirkung der repulsiven Wechselwirkung von Adsorbat und Substrat auf die Elektronen im Oberfl{\"a}chenzustandsband. Eine schrittweise Bedeckung der Oberfl{\"a}che von Cu und Au(111) mit Ag-Monolagen bedingt eine graduelle Ver{\"a}nderung des Oberfl{\"a}chenpotenzials und verursacht einen zunehmende Ag-Charakter des Shockley-Zustands. F{\"u}r N \&\#8805; 7 ML dicke, lagenweise wachsende Ag-Schichten auf Au(111) werden im Experiment neue zweidimensionale elektronische Strukturen beobachtet, die den Quantentrogzust{\"a}nden des Ag-Films zugeordnet werden. Inwiefern sie innerhalb der Ag-Schicht lokalisiert sind oder sich noch zu einem wesentlichen Anteil im Substrat befinden, zeigt die Untersuchung ihrer energetischen und r{\"a}umlichen Evolution mit der Ag-Schichtdicke N. Dazu wurden neben der Bindungsenergie auch die Photoemissionsintensit{\"a}t der Quantentrogzust{\"a}nde vermessen, die Aussagen {\"u}ber die Lokalisierung erlauben, welche mit Ergebnissen aus Dichtefunktionalrechnungen verglichen werden. Schließlich wird anhand der Xe-Adsorption auf unterschiedlich dicken Ag-Filmen auf Cu und Au(111) gezeigt, dass der Oberfl{\"a}chenzustand nicht nur als Sonde f{\"u}r Adsorptionsmechanismen dient, sondern selbst das Adsorptionsverhalten maßgeblich mitbestimmt. Ein Erkl{\"a}rungsmodell wird vorgestellt, welches neben der durch die Bandstruktur bestimmte Zustandsdichte auch die Lokalisierung der Ladungsdichte an der Oberfl{\"a}che ber{\"u}cksichtigt, um ein Maß f{\"u}r die St{\"a}rke der repulsiven Wechselwirkung zu beschreiben, die Edelgasadsorbate auf den Oberfl{\"a}chen erfahren.}, language = {de} } @phdthesis{Pappert2007, author = {Pappert, Katrin}, title = {Anisotropies in (Ga,Mn)As - Measurement, Control and Application in Novel Devices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-23370}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Ferromagnetic semiconductors (FS) promise the integration of magnetic memory functionalities and semiconductor information processing into the same material system. The prototypical FS (Ga,Mn)As has become the focus of semiconductor spintronics research over the past years. The spin-orbit mediated coupling of magnetic and semiconductor properties in this material gives rise to many novel transport-related phenomena which can be harnessed for device applications. In this thesis we address challenges faced in the development of an all-semiconductor memory architecture. A starting point for information storage in FS is the knowledge of their detailed magnetic anisotropy. The first part of this thesis concentrates on the investigation of the magnetization behaviour in compressively strained (Ga,Mn)As by electrical means. The angle between current and magnetization is monitored in magnetoresistance(MR) measurements along many in-plane directions using the Anisotropic MR(AMR) or Planar Hall effect(PHE). It is shown, that a full angular set of such measurements displayed in a color coded resistance polar plot can be used to identify and quantitatively determine the symmetry components of the magnetic anisotropy of (Ga,Mn)As at 4 K. We compile such "anisotropy fingerprints" for many (Ga,Mn)As layers from Wuerzburg and other laboratories and find the presence of three symmetry terms in all layers. The biaxial anisotropy term with easy axes along the [100] and [010] crystal direction dominates the magnetic behaviour. An additional uniaxial term with an anisotropy constant of ~10\% of the biaxial one has its easy axis along either of the two <110> directions. A second contribution of uniaxial symmetry with easy axis along one of the biaxial easy axes has a strength of only ~1\% of the biaxial anisotropy and is therefore barely visible in standard SQUID measurements. An all-electrical writing scheme would be desirable for commercialization. We report on a current assisted magnetization manipulation experiment in a lateral (Ga,Mn)As nanodevice at 4 K (far below Tc). Reading out the large resistance signal from DW that are confined in nanoconstrictions, we demonstrate the current assisted magnetization switching of a small central island through a hole mediated spin transfer from the adjacent leads. One possible non-perturbative read-out scheme for FS memory devices could be the recently discovered Tunneling Anisotropic MagnetoResistance (TAMR) effect. Here we clarify the origin of the large amplification of the TAMR amplitude in a device with an epitaxial GaAs tunnel barrier at low temperatures. We prove with the help of density of states spectroscopy that a thin (Ga,Mn)As injector layer undergoes a metal insulator transition upon a change of the magnetization direction in the layer plane. The two states can be distinguished by their typical power law behaviour in the measured conductance vs voltage tunneling spectra. While all hereto demonstrated (Ga,Mn)As devices inherited their anisotropic magnetic properties from their parent FS layer, more sophisticated FS architectures will require locally defined FS elements of different magnetic anisotropy on the same wafer. We show that shape anisotropy is not applicable in FS because of their low volume magnetization. We present a method to lithographically engineer the magnetic anisotropy of (Ga,Mn)As by submicron patterning. Anisotropic strain relaxation in submicron bar structures (nanobars) and the related deformation of the crystal lattice introduce a new uniaxial anisotropy term in the energy equation. We demonstrate by both SQUID and transport investigations that this lithographically induced uniaxial anisotropy overwrites the intrinsic biaxial anisotropy at all temperatures up to Tc. The final section of the thesis combines all the above into a novel device scheme. We use anisotropy engineering to fabricate two orthogonal, magnetically uniaxial, nanobars which are electrically connected through a constriction. We find that the constriction resistance depends on the relative orientation of the nanobar magnetizations, which can be written by an in-plane magnetic field. This effect can be explained with the AMR effect in connection with the field line patterns in the respective states. The device offers a novel non-volatile information storage scheme and a corresponding non-perturbative read-out method. The read out signal is shown to increase drastically in samples with partly depleted constriction region. This could be shown to originate in a magnetization direction driven metal insulator transition of the material in the constriction region.}, subject = {Anisotropie}, language = {en} } @phdthesis{Schmitt2007, author = {Schmitt, Stefan}, title = {Adsorbatinduzierte richtungsabh{\"a}ngige Facettierung und selbstorganisierte Dom{\"a}nen-Musterbildung auf vizinalen Ag(111)-Oberfl{\"a}chen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-25088}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit den strukturellen Aspekten einer adsorbat-induzierten Facettierung von vizinalen Ag(111)-Oberfl{\"a}chen. Bei dem Adsorbat handelte es sich um das organische Molek{\"u}l Perylen-3,4,9,10-Tetracarbons{\"a}ure-Dianhydrid (PTCDA). Die Experimente wurden unter Ultrahochvakuum-Bedingungen durchgef{\"u}hrt, die Charakterisierung erfolgte haupts{\"a}chlich mit den Messmethoden Rastertunnelmikroskopie (STM) und niederenergetische Elektronenbeugung (LEED). Das planare Farbstoffmolek{\"u}l PTCDA adsorbiert pr{\"a}ferentiell an den Stufenkanten der verwendeten 8.5° Ag(111)-Vizinaloberfl{\"a}chen und induziert bei geeigneten Pr{\"a}parationsbedingungen eine Rekonstruktion in stark gestufte Facettenfl{\"a}chen und in stufenfreie (111)-Terrassen. Die beobachteten Facetten sind f{\"u}r das System PTCDA/Ag charakteristisch und stellen durch eine molekulare {\"U}berstruktur richtungsselektiv stabilisierte Ag-Kristallebenen dar. Durch die Variation der Stufenrichtung der Startoberfl{\"a}che wurde eine Vielzahl von Facettentypen erhalten und nach Miller indiziert. In ihrer Gesamtheit erlauben sie einen R{\"u}ckschluss auf das Aussehen der Gleichgewichtskristallform eines mit PTCDA bedeckten Ag-Kristalles und damit auf das richtungsabh{\"a}ngige Benetzungsverhalten von Ag. Aus der Sicht des Substrates bewirkt das Adsorbat eine massive Erh{\"o}hung der Steifheit der Stufen. Die durch eine molekulare {\"U}berstruktur stabilisierten Facettenfl{\"a}chen {\"u}bernehmen die in der Kristallstruktur des Substrates angelegten Stufenrichtungen. Die gefundene Ausbildung von zwei typischen Facettensteigungen ist jedoch nicht durch die Ag-Kristallstruktur motivierbar. Die Facettierung wurde im Rahmen einer speziellen Adaption des Konzepts der Thermodynamik auf ebene gestufte Oberfl{\"a}chen als Orientierungsphasenseparation beschrieben. Dieses Konzept erlaubt eine korrekte Beschreibung der beobachteten lokalen Ph{\"a}nomene und zeigt zudem auf, dass das molekulare Gas, welches in den Messungen nicht erfasst wurde, eine wichtige Rolle bei der Rekonstruktion spielt. Es ergaben sich wichtige Indizien f{\"u}r die Existenz einer kritischen Inselgr{\"o}ße f{\"u}r PTCDA auf Ag(111). Es wurde eine vollst{\"a}ndige strukturelle Analyse aller stabilen molekularen {\"U}berstrukturen auf vizinalen Ag(111)-Oberfl{\"a}chen durchgef{\"u}hrt. Es wurden insgesamt 16 solcher {\"U}berstrukturen gefunden, von denen bisher nur 3 Strukturen bekannt und ver{\"o}ffentlicht waren. Dichte und Kommensurabilit{\"a}t der Facetten{\"u}berstrukturen sind systematisch vom Stufentyp der Oberfl{\"a}che abh{\"a}ngig. Die Frage nach dem Ursprung der beiden charakteristischen Facettensteigungen ist mit der Existenz von zwei Typen von {\"U}berstrukturgrenzen verkn{\"u}pft. Die Grenze bestimmt die Lage der fischgr{\"a}tartigen {\"U}berstruktur zu den Stufenkanten und die L{\"a}nge und die Breite des Molek{\"u}ls die beiden charakteristischen Stufenabst{\"a}nde. Letzteres geschieht verm{\"o}ge einer lokalen Wechselwirkung der PTCDA-Molek{\"u}le mit den Stufen. Die {\"U}berstrukturgrenzen erweisen sich als wichtiges Element der Rekonstruktion. Es wurden außerdem die Abh{\"a}ngigkeiten der verschiedenen, aneinander angrenzenden {\"U}berstrukturen aufgezeigt. Auf den (111)-Terrassen fanden sich 3 metastabile Ausnahme-Strukturen, welche einen vertieften Einblick in die komplexe Bildungskinetik der bisher bekannten stabilen (111)-Struktur erlauben. Die Facetten bilden zusammen mit den benachbarten (111)-Terrassen regelm{\"a}ßige, einem Reflexionsgitter {\"a}hnliche Muster mit einer Strukturweite von 5 bis 75nm. Die beobachteten Strukturweiten erreichen bei ausgedehntem Tempern typische Maximalwerte. STM-Messungen zeigen den Einfluss einer langreichweitigen Wechselwirkung zwischen den Facetten, vermittelt {\"u}ber elastische Eigenschaften des Substrates. Die Muster k{\"o}nnen als selbstorganisierte Zweiphasensysteme im thermodynamischen Gleichgewicht erkl{\"a}rt werden. Die Facetten wirken wie repulsiv wechselwirkende Defekte in einem elastischen Medium. Die Eignung dieser Muster als Templat wurde in Kooperation mit einer anderen Arbeitsgruppe am Beispiel der selektiven Deposition von Eisen belegt.}, subject = {Adsorbat}, language = {de} } @phdthesis{Selle2007, author = {Selle, Reimer Andreas}, title = {Adaptive Polarization Pulse Shaping and Modeling of Light-Matter Interactions with Neural Networks}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-25596}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {The technique of ultrafast polarization shaping is applied to a model quantum system, the potassium dimer. The polarization dependence of the multiphoton ionization dynamics in this molecule is first investigated in pump-probe experiments, and it is then more generally addressed and exploited in an adaptive quantum control experiment utilizing near-IR polarization-shaped laser pulses. The extension of these polarization shaping techniques to the UV spectral range is presented, and methods for the generation and characterization of polarization-shaped laser pulses in the UV are introduced. Systematic scans of double-pulse sequences are introduced for the investigation and interpretation of control mechanisms. This concept is first introduced and illustrated for an optical demonstration experiment, and it is then applied for the analysis of the intrapulse dumping mechanism that is observed in the excitation of a large dye molecule in solution with ultrashort laser pulses. Shaped laser pulses are employed as a means for obtaining copious amounts of data on light-matter interactions. Neural networks are introduced as a novel tool for generating computer-based models for these interactions from the accumulated data. The viability of this approach is first tested for second harmonic generation (SHG) and molecular fluorescence processes. Neural networks are then utilized for modeling the far more complex coherent strong-field dynamics of potassium atoms.}, subject = {Lasertechnologie}, language = {en} }