@phdthesis{Emmert2020,
  author    = {Emmert, Adrian Alexander},
  title     = {The Internal Structure of Periglacial Landforms - Assessments of Subsurface Variations in Permafrost-related and Frost-related Phenomena by Multi-dimensional Geophysical Investigations},
  edition   = {1. Auflage},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-138-9},
  doi       = {10.25972/WUP-978-3-95826-139-6},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-202437},
  school      = {W{\"u}rzburg University Press},
  pages     = {xix, 167},
  year      = {2020},
  abstract  = {The internal structure of periglacial landforms contains valuable information on past and present environmental conditions. To benefit from this archive, however, an enhanced understanding of subsurface variations is crucial. This enables to assess the influence of the internal structure on prevailing process regimes and to evaluate the sensitivity of different landform units to environmental changes. This thesis investigates structural variations in the subsurface of (i) rock glaciers,(ii) solifluction lobes, (iii) palsas/ lithalsas and (iv) patterned ground, which occur between the different landform types, but also between landform units of the same type. Investigated variables comprise (i) the spatial distribution of permafrost, (ii) ground ice content, (iii) the origin of ground ice, (iv) thickness of the active layer and (v) frost table topography. Multi-dimensional investigations by the geophysical methods Electrical Resistivity Imaging (ERI) and Ground-Penetrating Radar (GPR) were performed in six study areas (a-f): four of them are located in high-alpine environments in Switzerland and two of them are located in the subarctic highlands of Iceland. Additionally, surface and subsurface temperature values were continuously recorded at selected study sites. At one study site, pF-values, representing the matric potential (or water potential), were recorded. From a methodological view, this thesis focuses on the application of quasi-3-D ERI, an approach in which many two-dimensional data sets are combined to create one three-dimensional data set. This permits e.g., a three-dimensional delimitation of subsurface structures and a spatial investigation of the distribution of ground ice. Besides the analysis of field data, this thesis incudes a comparison between inversion models produced with different software products, based on two synthetic data sets. The detection of resistivity structures and reflection patterns provides valuable insights into the internal structure of the investigated landform units: At the high-alpine study site at (a) Piz Nair, a highly variable ice content indicates a complex development of the investigated rock glacier assembly. The local formation of ground ice is attributed to an embedding of surface patches of snow or ice into the subsurface by rockfall. Results of geoelectric monitoring surveys on selected rock glaciers show the influence of seasonal alterations in the internal structure on subsurface meltwater flow. At the study site at (b) Piz {\"U}ertsch, results indicate the occurrences of isolated ground ice patches in a significantly larger rock glacier. Detected characteristics of the internal structure enable to reconstruct the development of the rock glacier, in which a temporary override of an adjacent glacier tongue on the rock glacier is considered crucial for the current distribution of ground ice. However, results of this thesis clearly show the absence of buried glacier ice in the subsurface of the rock glacier. Results from a rock glacier near the (c) Las Trais Fluors mountain ridge affirm the existence of a water-permeable frozen layer, which was assumed in previous studies. Furthermore, results show that the rock glacier contains large amounts of rockfall deposits. A joint interpretation of ERI and GPR results from the investigated scree slope at the mountain (d) Blauberg (Furka Pass) reveals characteristic structures in the subsurface, which enable a differentiation between solifluction lobes and pebbly rock glaciers. At the subarctic study site (e) Orravatnsr{\´u}stir, results show that the internal structure of palsas can be used to deduce their current development stage and to assess past and future developments. Presented results affirm a long history of palsa development at the study site, as assumed in previous studies, but indicate recently changing environmental conditions. The investigated occurrences of patterned ground in the proglacial area of the glacier (f) Hofsj{\"o}kull are currently not influenced by the detected occurrence of permafrost, according to the presented results. Therefore, a temporary formation of pattered ground is assumed, which is linked to the retreat of the glacier. This thesis shows discrepancies between the internal structure of some of the investigated landform units and the recent environmental conditions. This indicates a delayed adaption and a low sensitivity of the landform units to environmental changes. Findings indicate that the future development of permafrost will be strongly affected by variations in snowfall. Furthermore, the detection of isolated occurrences of ground ice at several study sites contradicts the widely assumed effectivity of balancing heat fluxes to create homogenous subsurface conditions in relatively fine-grained subsurface materials.},
  subject      = {Permafrost},
  language  = {en}
}
@phdthesis{Spitznagel2017,
  author    = {Spitznagel, Niko},
  title     = {Energy transfer during molten fuel coolant interaction},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142891},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {The contact of hot melt with liquid water - called Molten Fuel Coolant Interaction (MFCI) - can result in vivid explosions. Such explosions can occur in different scenarios: in steel or powerplants but also in volcanoes. Because of the possible dramatic consequences of such explosions an investigation of the explosion process is necessary. Fundamental basics of this process are already discovered and explained, such as the frame conditions for these explosions. It has been shown that energy transfer during an MFCI-process can be very high because of the transfer of thermal energy caused by positive feedback mechanisms. Up to now the influence of several varying parameters on the energy transfer and the explosions is not yet investigated sufficiently. An important parameter is the melt temperature, because the amount of possibly transferable energy depends on it. The investigation of this influence is the main aim of this work. Therefor metallic tin melt was used, because of its nearly constant thermal material properties in a wide temperature range. With tin melt research in the temperature range from 400 °C up to 1000 °C are possible. One important result is the lower temperature limit for vapor film stability in the experiments. For low melt temperatures up to about 600 °C the vapor film is so unstable that it already can collapse before the mechanical trigger. As expected the transferred thermal energy all in all increases with higher temperatures. Although this effect sometimes is superposed by other influences such as the premix of melt and water, the result is confirmed after a consequent filtering of the remaining influences. This trend is not only recognizable in the amount of transferred energy, but also in the fragmentation of melt or the vaporizing water. But also the other influences on MFCI-explosions showed interesting results in the frame of this work. To perform the experiments the installation and preparation of the experimental Setup in the laboratory were necessary. In order to compare the results to volcanism and to get a better investigation of the brittle fragmentation of melt additional runs with magmatic melt were made. In the results the thermal power during energy transfer could be estimated. Furthermore the model of "cooling fragments " could be usefully applied.},
  subject      = {Vulkanologie},
  language  = {en}
}