@phdthesis{Hochheimer2022,
  author    = {Hochheimer, Vanessa Christine},
  title     = {Of cells and enzymes: How dermal fibroblasts can impact pain in Fabry Disease and Why looking at the 3D-structure of α-Galactosidase A may be worthwhile for clinical management of Fabry patients},
  doi       = {10.25972/OPUS-29660},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-296607},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {Fabry Disease (FD) is a genetic lysosomal storage disorder based on mutations in the gene encoding α-Galactosidase A (α-GalA) leading to accumulation of globotriaosylceramide (Gb3). Missense mutations induce an amino acid exchange (AAE) in the α-GalA. Pain is a predominant symptom in FD and the pathophysiology is unclear. Skin punch biopsies were obtained from 40 adult FD patients and ten healthy controls and dermal fibroblast cultures were generated for cell culture experiments to investigate Gb3 load, gene and protein expression patterns and ion channel activity. The 3D-structure of α-GalA was downloaded into Pymol Graphics System and the AAE was depicted and located in order to investigate the correlation between the AAE location type in the α-GalA and the clinical FD phenotype. FD dermal fibroblasts showed high Gb3 load depending on treatment interval and expressed Kca1.1 channels. Activity was reduced in FD cells at baseline, but increased over-proportionately upon Gb3-cleavage by enzyme replacement therapy. Gene and protein expression of Kca1.1 was increased in FD cells. FD dermal fibroblasts showed higher gene expression of Notch1 and several cytokines. Further, it was shown that three different AAE location types can be differentiated: mutations in the active site ('active site'), those buried in the core of α-GalA ('buried') and those at another location, mostly on the protein surface ('other'). FD patients carrying active site or buried mutations showed a severe clinical phenotype with multi-organ manifestation and early disease onset. Patients with other mutations were less severely affected with oligo-organ manifestation sparing the nervous system and later disease onset. These results show that dermal fibroblasts may be involved in FD-associated pain and that stratification of FD patients carrying missense mutations by AAE location type may be an advantageous parameter that can help in the management of FD patients.},
  subject      = {Fabry-Krankheit},
  language  = {en}
}
@phdthesis{Kuen2017,
  author    = {Kuen, Janina},
  title     = {Influence of 3D tumor cell/fibroblast co-culture on monocyte differentiation and tumor progression in pancreatic cancer},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-156226},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {Pancreatic cancer (PC) remains one of the most challenging solid tumors to treat with a high unmet medical need as patients poorly respond to standard-of-care-therapies. Prominent desmoplastic reaction involving cancer-associated fibroblasts (CAFs) and the immune cells in the tumor microenvironment (TME) and their cross-talk play a significant role in tumor immune escape and progression. To identify the key cellular mechanisms induce an immunosuppressive tumor microenvironment, we established 3D co-culture model with pancreatic cancer cells, CAFs, monocyte as well as T cells. Using this model, we analysed the influence of tumor cells and fibroblasts on monocytes and their immune suppressive phenotype. Phenotypic characterization of the monocytes after 3D co-culture with tumor/fibroblast spheroids was performed by analysing the expression of defined cell surface markers and soluble factors. Functionality of these monocytes and their ability to influence T cell phenotype and proliferation was investigated. 3D co-culture of monocytes with pancreatic cancer cells and fibroblasts induced the production of immunosuppressive cytokines which are known to promote polarization of M2 like macrophages and myeloid derived suppressive cells (MDSCs). These co-culture spheroid polarized monocyte derived macrophages (MDMs) were poorly differentiated and had an M2 phenotype. The immunosuppressive function of these co-culture spheroids polarized MDMs was demonstrated by their ability to inhibit autologous CD4+ and CD8+ T cell activation and proliferation in vitro, which we could partially reverse by 3D co-culture spheroid treatment with therapeutic molecules that are able to re-activate spheroid polarized MDMs or block immune suppressive factors such as Arginase-I. In conclusion, we generated a physiologically relevant 3D co-culture model, which can be used as a promising tool to study complex cell-cell interactions between different cell types within the tumor microenvironment and to support drug screening and development. In future, research focused on better understanding of resistance mechanisms to existing cancer immunotherapies will help to develop new therapeutic strategies in order to combat cancer.},
  subject      = {monocyte},
  language  = {en}
}
@phdthesis{Heffels2012,
  author    = {Heffels, Karl-Heinz},
  title     = {Functional nanofibres for regenerative medicine},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-75684},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2012},
  abstract  = {This thesis concerned the design and examination of a scaffold for tissue engineering applications. The template for the presented scaffold came from nature itself: the intercellular space in tissues that provides structure and support to the cells of the respective tissue, known as extracellular matrix (ECM). Fibres are a predominant characteristic feature of ECM, providing adhesion sites for cell-matrix interactions. In this dissertation a fibrous mesh was generated using the electrospinning technique to mimic the fibrous structure of the ECM. Two base polymers were explored: a biodegradable polyester, poly(D,L-lactide-co-glycolide); and a functional PEG-based star polymer, NCO-sP(EO-stat-PO). This topic was described in three major parts: the first part was materials based, concerning the chemical design and characterisation of the polymer scaffolds; the focus was then shifted to the cellular response to this fibrous scaffold; and finally the in vivo performance of the material was preliminarily assessed. The first steps towards an electrospun mesh started with adjusting the spinning parameters for the generation of homogeneous fibres. As reported in Chapter 3 a suitable setup configuration was on the one hand comprised of a spinning solution that consisted of 28.5 w/v\% PLGA RG 504 and 6 w/v\% NCO-sP(EO-stat-PO) in 450 µL acetone, 50 µL DMSO and 10 µL of an aqueous trifluoroacetic acid solution. On the other hand an ideal spinning behaviour was achieved at process parameters such as a flow rate of 0.5 mL/h, spinneret to collector distance of 12-16 cm and a voltage of 13 kV. The NCO-sP(EO-stat-PO) containing fibres proved to be highly hydrophilic as the functional additive was present on the fibre surface. Furthermore, the fibres featured a bulk degradation pattern as a consequence of the proportion of PLGA. Besides the morphologic similarity to ECM fibres, the functionality of the electrospun fibres is also decisive for a successful ECM mimicry. In Chapter 4, the passive as well as active functionality of the fibres was investigated. The fibres were required to be protein repellent to prevent an unspecific cell adhesion. This was proven as even 6.5 \% sP(EO-stat-PO) in the PLGA fibres reduced any unspecific protein adsorption of bovine serum albumin and foetal calf serum to less than 1 \%. However, avidin based proteins attached to the fibres. This adhesion process was avoided by an additional fibre surface treatment with glycidol. The active functionalisation of NCO-sP(EO-stat-PO)/PLGA fibres was investigated with two fluorescent dyes and biocytin. A threefold, chemically orthogonal, fibre modification was achieved with these dyes. The chapters about the chemical and mechanical properties laid the basis for the in vitro chapters where a specific fibre functionalisation with peptides was conducted to analyse the cell adhesion and biochemical expressions. Beginning with fibroblasts in Chapter 5 the focus was on the specific cell adhesion on the electrospun fibres. While NCO-sP(EO-stat-PO)/PLGA fibres without peptides did not allow any adhesion of fibroblasts, a fibre modification with GRGDS (an adhesion mediating peptide sequence) induced the adhesion and spreading of human dermal fibroblasts on the fibrous scaffolds. The control sequence GRGES that has no adhesion mediating qualities did not lead to any cell adhesion as observed on fibres without modifications. While the experiments of Chapter 5 were a proof-of-concept, in Chapter 6 a possible application in cartilage tissue engineering was examined. Therefore, primary human chondrocytes were seeded on fibrous scaffolds with various peptide sequences. Though the chondrocytes exhibited high viability on all scaffolds, an active interaction of cells and fibres was only found for the decorin derived sequence CGKLER. Live-cell-imaging revealed both cell attachment and migration within CGKLER-modified meshes. As chondrocytes undergo a de-differentiation towards a fibroblast-like phenotype, the chondrogenic re-differentiation on these scaffolds was investigated in a long term cell culture experiment of 28 days. Therefore, the glycosaminoglycan production was analysed as well as the mRNA expression of genes coding for collagen I and II, aggrecan and proteoglycan 4. In general only low amounts of the chondrogenic markers were measured, suggesting no chondrogenic differentiation. For conclusive evidence follow-up experiments are required that support or reject the findings. The success of an implant for tissue engineering relies not only on the response of the targeted cell type but also on the immune reaction caused by leukocytes. Hence, Chapter 7 dealt with primary human macrophages and their behaviour and phenotype on two-dimensional (2D) surfaces compared to three-dimensional (3D) fibrous substrates. It was found that the general non-adhesiveness of NCO-sP(EO-stat-PO) surfaces and fibres does not apply to macrophages. The cells aligned along the fibres on surfaces or resided in the pores of the meshes. On flat surfaces without 3D structure the macrophages showed a retarded adhesion kinetic accompanied with a high migratory activity indicating their search for a topographical feature to adhere to. Moreover, a detailed investigation of cell surface markers and chemokine signalling revealed that macrophages on 2D surfaces exhibited surface markers indicating a healing phenotype while the chemokine release suggested a pro-inflammatory phenotype. Interestingly, the opposite situation was found on 3D fibrous substrates with pro-inflammatory surface markers and pro-angiogenic cytokine release. As the immune response largely depends on cellular communication, it was concluded that the NCO-sP(EO-stat-PO)/PLGA fibres induce an adequate immune response with promising prospects to be used in a scaffold for tissue engineering. The final chapter of this thesis reports on a first in vivo study conducted with the presented electrospun fibres. Here, the fibres were combined with a polypropylene mesh for the treatment of diaphragmatic hernias in a rabbit model. Two scaffold series were described that differed in the overall surface morphology: while the fibres of Series A were incorporated into a thick gel of NCO-sP(EO-stat-PO), the scaffolds of Series B featured only a thin hydrogel layer so that the overall fibrous structure could be retained. After four months in vivo the treated defects of the diaphragm were significantly smaller and filled mainly with scar tissue. Thick granulomas occurred on scaffolds of Series A while the implants of Series B did not induce any granuloma formation. As a consequence of the generally positive outcome of this study, the constructs were enhanced with a drug release system in a follow-up project. The incorporated drug was the MMP-inhibitor Ilomastat which is intended to reduce the formation of scar tissue. In conclusion, the simple and straight forward fabrication, the threefold functionalisation possibility and general versatile applicability makes the meshes of NCO-sP(EO-stat-PO)/PLGA fibres a promising candidate to be applied in tissue engineering scaffolds in the future.},
  subject      = {Nanofaser},
  language  = {en}
}
@phdthesis{Kilic2002,
  author    = {Kilic, Mehtap},
  title     = {Formation of caspase activating complexes and activation of caspase-12 during apoptosis in AKR-2B mouse fibroblasts},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-7190},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2002},
  abstract  = {Der Zelltod kann in Dichte-arretierten AKR-2B Mausfibroblasten durch Entzug des Serums oder Behandlung mit Anisomycin induziert werden. Der Zelltod zeigt zwar die f{\"u}r die Apoptose typischen morphologischen Ver{\"a}nderungen der Zelle wie Zellfragmentierung und Chromatinkondensation jedoch fehlen andere apoptotische Charakteristika, wie die oligonukleosomale Fragmentierung der DNA oder {\"A}nderung des Membranpotentials der Mitochondria. W{\"a}hrend der Apoptose wurde eine beachtliche DEVDase Aktivit{\"a}t nach- gewiesen, die einem einzelnen Enzym zugeordnet werden konnte. Dieses Enzym hatte typische Eigenschaften von Effektor-Caspasen, wie die der Caspase-3, besaß jedoch einen ungew{\"o}hnlich hohen KM Wert von 100 µM, und die Molmasse der großen Untereinheit betrug 19 kDa anstelle der erwarteten 17 kDa. Mit Hilfe des rekombinanten mCaspase-3 Proteins wurde dieses Enzym in der vorliegenden Untersuchung als Caspase-3 identifiziert. Die N-terminale Sequenzierung des mCaspase-3 Proteins ergab, daß sich die Spaltstelle seiner Prodom{\"a}ne von der des humanen homologen Proteins unterschied (Asp-9 von Asp-28). Somit betrug die Molmasse der großen Untereinheit der aktiven Caspase-3 19 kDa. Dar{\"u}berhinaus stimmte der KM-Wert der rekombinanter mCaspase-3 von ~100 µM mit der {\"u}berein, die in Zellextrakten bestimmt wurde. Die Affinit{\"a}tmarkierung in Kombination mit einer 2D-Gelelektrophorese best{\"a}tigte, daß tats{\"a}chlich Caspase-3 als Haupt-Effektor-Caspase in AKR-2B-Zellen w{\"a}hrend der Apoptose aktiviert wird. Im Folgenden wurde untersucht, welcher Signalwege in AKR-2B-Zellen, denen Serum aus dem N{\"a}hrmedia entzogen wurden war oder die mit Anisomycin behandelt worden waren, zur Aktivierung der Caspase-3 f{\"u}hrt. Da eine Beteiligunug des Rezeptor-vermittelte Signalweges bereits zuvor ausgeschlossen worden war,wurde {\"u}berpr{\"u}ft, ob der mitochondrial vermittelte Signalweg bei der Aktivierung von Caspase-3 ein Rolle spielt. Gelfiltrations- experimente ergaben, daß Caspase-3 als freies Enzym und nur in geringen Mengen innerhalb unterschiedlich große Komplexe der Molmassen 600 kDa und 250 kDa eluiert wird. Obwohl die apparenten Molmassen der Caspase-3-haltigen Komplexe mit k{\"u}rzlich ver{\"o}ffentlichten Daten {\"u}bereinstimmten, enthielten sie weder Apaf-1 noch Caspase-9. Dies deutet daraufhin, daß der mitochondrial-vermittelte Signalweg ebenfalls nicht an der Caspase-3 Aktivierung beteiligt ist. Dar{\"u}berhinaus wurde ein neuer Caspase-6 enthaltender Komplex (450 kDa) nach Serumentzug in AKR-2B-Zellen gefunden, der sich deutlich von Caspase-3 haltigen Komplexen unterscheidet. Caspase-3 ist f{\"u}r die meisten morphologische Ver{\"a}nderungen w{\"a}hrend der Apoptose verantwortlich. Wahrend der Apoptose in der AKR-2B-Zellen zwar Caspase-3 als Haupt-Effektor-Caspase identifiziert worden war, jedoch keine intranukleosomale Fragmentierung nachgeweisen werden konnen, da bei wurde die intrazellul{\"a}re Lokalisation der Caspase-3 untersucht. Durch {\"U}berexpression eines Caspase-3-GFP Fusionskonstruktes in AKR-2B Zellen wurde die Procaspase-3 im Cytoplasma lokalisiert, w{\"a}hrend die aktive Caspase-3 vorwiegend in membranumh{\"u}llten Vesikeln und zum Teil im Cytoplasma aktiviert wurde. Ebenfalls wurde eine m{\"o}gliche Beteiligung von Caspase-12 und eine ER-Streß vermittelte Signalleitung an der Apoptose in AKR-2B-Zellen untersucht. Kinetische Untersuchungen zeigten, daß Caspase-12 im Fall von Serumentzug oder Behandlung mit Anisomycin zeitgleich mit Caspase-3 aktiviert wurde, was zur Bildung von zwei Spaltprodukte der Molmassen 47 kDa und 35 kDa f{\"u}hrte. Gelfiltrationsexperimente ergaben, daß Caspase-12 als freies Enzym w{\"a}hrend der Apoptose auftritt. Bis zu diesem Zeitpunkt wurde in allen Publikationen beschrieben, daß Caspase-12 in Folge von ER-Streß aktiviert wird. Nach Serumentzug oder Zugabe von Anisomycin zu AKR-2B-Zellen wurde jedoch kein Anstieg der Synthese des Chaperon-Proteins Grp78, einem Marker f{\"u}r ER-Streß, beobachtet. Dies zeigt, daß beide Behandlungen nicht zur ER-Streß f{\"u}hren. Im Gegensatz dazu erzeugten bekannte Indikatoren von ER Streß wie Thapsigargin und A23187 (ionophor) ER-Streß in AKR-2B-Zellen, was zu unspezifischem Abbau der Caspase-12 f{\"u}hrte. Darum ist es unwahrscheinlich, daß in AKR-2B- Zellen Caspase-12 bei ER-Streß aktiviert wird. Zusammenfassend zeigten diese Daten, daß Caspase-12 in AKR-2B-Zellen {\"u}ber Signalwegen aktiviert wird, die ER stress un- abh{\"a}ngig sind und zeigen daß Caspase-3 bei der Aktivierung von Caspase-12 beteiligt ist somit liefern die vorliegenden Untersuchungen einen Hinweis darauf daß neben den klassischen Signalwege weitere Signalwege existieren, die zur Apoptose f{\"u}hrten.},
  subject      = {Apoptosis},
  language  = {en}
}