@phdthesis{Spieler2021,
  author    = {Spieler, Valerie},
  title     = {Bioinspired drug delivery of interleukin-4},
  doi       = {10.25972/OPUS-19359},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193590},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Chronic inflammatory diseases such as rheumatoid arthritis, type 2 diabetes and cardiovascular diseases, are associated with the homeostatic imbalance of one of several physiological systems combined with the lack of spontaneous remission, which causes the disease to persevere throughout patients' lives. The inflammatory response relies mainly on tissue-resident, pro-inflammatory M1 type macrophages and, consequently, a chance for therapeutic intervention lies in driving macrophage polarization towards the anti-inflammatory M2 phenotype. Therefore, anti-inflammatory cytokines that promote M2 polarization, including interleukin-4 (IL4), have promising therapeutic potential. Unfortunately, their systemic use is hampered by a short serum half-life and dose-limiting toxicity. On the way towards cytokine therapies with superior safety and efficacy, this thesis is focused on designing bioresponsive delivery systems for the anti-inflammatory cytokine IL4. Chapter 1 describes how anti-inflammatory cytokines are tightly regulated in chronic, systemic inflammation as in rheumatoid arthritis but also in acute, local inflammation as in myocardial infarction. Both diseases show a characteristic progression during which anti-inflammatory cytokine delivery is of variable benefit. A conventional, passive drug delivery system is unlikely to release the cytokines such that the delivery matches the dynamic course of the (patho-)physiological progress. This chapter presents a blueprint for active drug delivery systems equipped with a 24/7 inflammation detector that continuously senses for matrix metalloproteinases (MMP) as surrogate markers of the disease progress and responds by releasing cytokines into the affected tissues at the right time and place. Because they are silent during phases of low disease activity, bioresponsive depots could be used to treat patients in asymptomatic states, as a preventive measure. The drug delivery system only gets activated during flares of inflammation, which are then immediately suppressed by the released cytokine drug and could prevent the steady damage of subclinical chronic inflammation, and therefore reduce hospitalization rates. In a first proof of concept study on controlled cytokine delivery (chapter 2), we developed IL4-decorated particles aiming at sustained and localized cytokine activity. Genetic code expansion was deployed to generate muteins with the IL4's lysine 42 replaced by two different unnatural amino acids bearing a side chain suitable for click chemistry modification. The new IL4 muteins were thoroughly characterized to ensure proper folding and full bioactivity. Both muteins showed cell-stimulating ability and binding affinity to IL4 receptor alpha similar to those of wild type IL4. Copper-catalyzed (CuAAC) and strain-promoted (SPAAC) azide-alkyne cycloadditions were used to site-selectively anchor IL4 to agarose particles. These particles had sustained IL4 activity, as demonstrated by the induction of TF-1 cell proliferation and anti-inflammatory M2 polarization of M-CSF-generated human macrophages. This approach of site-directed IL4 anchoring on particles demonstrates that cytokine-functionalized particles can provide sustained and spatially controlled immune-modulating stimuli. The idea of a 24/7 sensing, MMP driven cytokine delivery system, as described in the introductory chapter, was applied in chapter 3. There, we simulated the natural process of cytokine storage in the extracellular matrix (ECM) by using an injectable solution of IL4 for depot formation by enzyme-catalyzed covalent attachment to ECM components such as fibronectin. The immobilized construct is meant to be cleaved from the ECM by matrix-metalloproteinases (MMPs) which are upregulated during flares of inflammation. These two functionalities are facilitated by a peptide containing two sequences: a protease-sensitive peptide linker (PSL) for MMP cleavage and a sequence for covalent attachment by activated human transglutaminase FXIIIa (TGase) included in the injection mix for co-administration. This peptide was site-selectively conjugated to the unnatural amino acid at IL4 position 42 allowing to preserve wild type bioactivity of IL4. In vitro experiments confirmed the anticipated MMP response towards the PSL and TGase-mediated construct attachment to fibronectin of the ECM. Furthermore, the IL4-peptide conjugates were able to reduce inflammation and protect non-load bearing cartilage along with the anterior cruciate ligament from degradation in an osteoarthritis model in rabbits. This represents the first step towards a minimally invasive treatment option using bioresponsive cytokine depots with potential clinical value for inflammatory conditions. One of the challenges with this approach was the production of the cytokine conjugate, with incorporation of the unnatural amino acid into IL4 being the main bottleneck. Therefore, in chapter 4, we designed a simplified version of this depot system by genetically fusing the bifunctional peptide via a flexible peptide spacer to murine IL4. While human IL4 loses its activity upon C-terminal elongation, murine IL4 is not affected by this modification. The produced murine IL4 fusion protein could be effectively bound to in vitro grown extracellular matrix in presence of TGase. Moreover, the protease-sensitive linker was selectively recognized and cleaved by MMPs, liberating intact and active IL4, although at a slower rate than expected. Murine IL4 offers the advantage to evaluate the bioresponsive cytokine depot in many available mouse models, which was so far not possible with human IL4 due to species selectivity. For murine IL4, the approach was further extended to systemic delivery in chapter 5. To increase the half-life and specifically target disease sites, we engineered a murine IL4 variant conjugated with a folate-bearing PEG chain for targeting of activated macrophages. The bioactive IL4 conjugate had a high serum stability and the PEGylation increased the half-life to 4 h in vivo. Surprisingly, the folate moiety did not improve targeting in an antigen-induced arthritis (AIA) mouse model. IL4-PEG performed better in targeting the inflamed joint, while IL4-PEG-folate showed stronger accumulation in the liver. Fortunately, the modular nature of the IL4 conjugate facilitates convenient adaption of PEG chain length and the targeting moiety to further improve the half-life and localization of the cytokine. In summary, this thesis describes a platform technology for the controlled release of cytokines in response to inflammation. By restricting the release of the therapeutic to the site of inflammation, the benefit-risk ratio of this potent class of biologics can be positively influenced. Future research will help to deepen our understanding of how to perfectly combine cytokine, protease-sensitive linker and immobilization tag or targeting moiety to tackle different diseases.},
  subject      = {Targeted drug delivery},
  language  = {en}
}
@phdthesis{Miesler2021,
  author    = {Miesler, Tobias Hans-Herbert},
  title     = {Development of diagnostic systems targeting the human tongue as a 24/7 available detector},
  doi       = {10.25972/OPUS-21449},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-214490},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {To diagnose diseases correctly requires not only trained and skilled personnel, but also cost-intensive and complex equipment. Rapid tests can help with the initial evaluation, but result generation can also take up to several hours, depending on the test system. At this point, novel bioresponsive diagnostic systems are used, responding to the disease related shift of biological processes. They monitor changes in the biological environment and can react to them e.g. with the release of substances. This can be used in drug delivery formulations but can also help to diagnose diseases occurring in the oral cavity and inform patients of their state of health. The tongue is herein used as a 24/7 available detector. In section I of this work, the foundation for the development of these diagnostic systems was laid. A suitable flavoring agent was found, which is stable, can be coupled to the N-terminus of peptides and has a strongly conceivable taste. For the optimization of the protease-sensitive linker (PSL), an analytical system was established (PICS assay), which determines protease-specific cleavable amino acid sequences. In order to replace the PMMA particles previously required, an acetyl protecting group was introduced N-terminally as it protects peptides and proteins in the human body from degradation by human aminopeptidase. The new synthesized flavor was examined with a NIH cell line for cytotoxicity and with an electronic tongue setup for its bitterness. Section II deals with the structure of a system which detects severe inflammations in the oral cavity, e.g. PA. The established PICS assay was used to confirm the previously used PSL sequence in its application. Using solid phase peptide synthesis, 3 linkers were synthesized which respond to the elevated MMP concentrations present in inflammation. The resulting peptides were acetylated and coupled with HATU/DIPEA to the modified denatonium. Cutting experiments with MMPs over different concentration and time ranges confirmed the response of the diagnostic sensor to these enzymes. The obtained construct was examined for cell toxicity by WST assay. The masked bitterness of the sensors was confirmed by an electronic tongue setup. To address non-human proteases (and thereby infections), section III focuses on the establishment of detection system of a cysteine protease SpeB expressed by Streptococcus pyogenes. The in-house expression of SpeB using E. coli cells was established for this purpose. An analysis of the SpeB cleavage sites was performed using a PICS assay setup. Four constructs with different PSL were synthesized analogous to section II. Cleavage experiments with the expressed and purified SpeB showed a response of two constructs to the protease. In addition, a system was established to quantify the concentration of SpeB in human saliva using western blot technique with subsequent quantification. In section IV a compound was synthesized which can now be coupled to a flavor. The final coupled construct is able to detect present NA activity specifically from influenza A and B. The market for existing influenza diagnostics was explored to determine the need for such a system. A neuraminic acid was modified in positions 4 and 7 and protected in such a way that subsequent coupling via the hydroxy-group in position 2 was selectively possible. In summary, this results in a diagnostic platform that can be used anywhere, by anyone and at any time. This represents a new dimension in the rapid diagnosis of inflammations and bacterial or viral infections.},
  subject      = {Diagnostik},
  language  = {en}
}
@phdthesis{HafergebZailer2021,
  author    = {Hafer [geb. Zailer], Elina},
  title     = {Tagging - Development of new qNMR methods},
  doi       = {10.25972/OPUS-21958},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-219583},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {High-resolution nuclear magnetic resonance (NMR) spectroscopy is used in structure elucidation and qualitative as well as quantitative examination of product components. Despite the worldwide development of numerous innovative NMR spectroscopic methods, several official methods that analyze specific substances and do not represent a holistic analysis, are still in use for the quality control of drugs, food and chemicals. Thus, counterfeit or contaminated products of inferior quality can be brought onto the market and distributed despite previous quality controls. To prevent this, three NMR spectroscopic methods have been developed within the scope of this work (1) to study the peroxide value in vegetable and animal oils, (2) for the qualitative and quantitative analysis of metal cations and (3) to determine the enantiomeric excess in chiral alcohols. In oil analysis, titration methods are used to determine the bulk quality parameters such as peroxide value, which represents the concentration of peroxides. Titrations show several drawbacks, such as the need of a large amount of sample and solvents, cross reactions and the low robustness. Thus, an alternative NMR spectroscopic method was developed to improve the peroxide analysis by using triphenylphosphine as a derivatization reagent, which reacts with peroxides in a stoichiometric ratio of 1:1 forming triphenylphosphine oxide. In the 1H-31P decoupled NMR spectrum, the signals of the unreacted triphenylphosphine and the reacted triphenylphosphine oxide are detected at 7.4 ppm and 7.8 ppm, respectively. The ratio of the two signals is used for the calculation of the peroxide concentration. 108 oil samples with a peroxide value between 1 meq/kg and 150 meq/kg were examined using the developed method. Oils with a very low peroxide value of less than 3 meq/kg showed a relative standard deviation of 4.9\%, highly oxidized oils with a peroxide value of 150 meq/kg of 0.2\%. The NMR method was demonstrated as a powerful technique for the analysis of vegetable and krill oils. Another 1H NMR spectroscopic method was developed for the qualitative determination of Be2+, Sr2+ and Cd2+, and for the qualitative and quantitative determination of Ca2+, Mg2+, Hg2+, Sn2+, Pb2+ and Zn2+ by using ethylenediamine tetraacetate (EDTA) as complexing agent. EDTA is a hexadentate ligand that forms stable chelate complexes with divalent cations. The known amount of added EDTA and the signal ratio of free and complexed EDTA are used to calculate the concentrations of the divalent cations, which makes the use of an internal standard obsolete. The use of EDTA with Be2+, Sr2+, Cd2+, Ca2+, Mg2+, Hg2+, Sn2+, Pb2+ and Zn2+ result in complexes whose signals are pH-independent, showing cation-specific chemical shifts and couplings in the 1H NMR spectrum that are used for identification and quantification. In the presented NMR method, the limit of quantification of the cations Ca2+, Mg2+, Hg2+, Sn2+, Pb2+, and Zn2+ was determined with 5-22 μg/mL. This method is applicable in the food and drug sectors. The third NMR spectroscopic method introduced an alternative determination of the enantiomer excess (ee) of the chiral alcohols menthol, borneol, 1-phenylethanol and linalool using phosgene as a derivatizing reagent. Phosgene reacts with a chiral alcohol to form carboxylic acid diesters, made of two identical (RR, SS) or two different enantiomers (RS, SR). These two different types of diastereomers can be examined by the difference of their chemical shifts. In the presented method, the integration values of the carbonyl signals in the 13C NMR spectrum are used for the determination of the enantiomer excess. The limit of quantification depends, among others, on the sample and on the non-labelled or 13C-labelled phosgene used for the analysis. In the case of menthol, a quantification limit of ee=99.1\% was determined using non-labelled phosgene and ee=99.9\% using 13C-labelled phosgene. The 13C NMR method was also applied for the quality control of the enantiomeric purity of borneol, 1-phenylethanol and linalool. The developed 13C NMR method represents a powerful alternative to Mosher's reagent for investigating the enantiomeric excess in chiral alcohols. This work demonstrates the variety of possibilities of applications for the quantitative nuclear magnetic resonance spectroscopy in the chemical analysis of drugs, food and chemicals using tagging reactions such as derivatizations and complexations. The nuclear resonance spectroscopic methods developed in this research work represent powerful alternatives to the previously used quality control techniques.},
  subject      = {NMR Spektroskopie},
  language  = {en}
}
@phdthesis{Saedtler2021,
  author    = {Saedtler, Marco},
  title     = {Pharmaceutical formulation strategies for novel antibiotic substances utilizing salt formation and two- and three-dimensional printing techniques},
  doi       = {10.25972/OPUS-21978},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-219784},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Salt formation is a routinely used strategy for poorly water-soluble drugs and traditionally performed with small inorganic counterions. High energy crystal lattices as well as effects on the local pH within the aqueous boundary layer during dissolution drive the increased dissolution rate and apparent solubility. Ionic liquids however, by definition low melting ionic salts with often large organic counterions, combine an increased dissolution rate with solubilization of the drug by the counterion itself. Long lasting supersaturation profiles of increased kinetic solubility were reported for several drugs formulated as ionic liquids increasing their overall bioavailability. Furthermore, aggregation and micellization between highly lipophilic compounds and amphiphilic bile acids was described before, demonstrating the capabilities of the human body itself to utilize solubilization of poorly water-soluble compounds. Development of novel counterions not only tailoring the desired physicochemical properties e.g. dissolution rate of the parent drug but adding - in a best-case scenario synergistic - pharmacological activity has been driven forward in the last years. However, salt formation can only be applied for ionizable i.e. acidic or basic compounds. While co-crystals can be used as a nonionized alternative, their formation is not always successful leading to an urgent need for other formulation strategies. In these lines, development of 2D and 3D printing techniques has been ongoing for the last decades and their pharmaceutical application has been demonstrated. The versatile nature and commercial availability allow a decentralized production further elaborating this technique for a highly flexible and patient-oriented supply with medication. This thesis focuses on the theoretical background and potential application of salt formation in the pharmaceutical development of a drug candidate. The first section presents the current knowledge and state of the art in preparation of low melting ionic liquids i.e. salts and is translated to the in vitro investigation of molecular interaction between the poorly water-soluble drug imatinib and components of the human intestinal fluid in the second section. Development of novel antibiotic counterions and assessment of their potential use in pharmaceutical formulations with fluoroquinolones is described in the last two sections. Chapter I describes the application of low melting ionic liquids in pharmaceutical formulation and details their development in the last two decades from versatile organic solvents in chemical synthesis towards amorphous strategies for drug delivery. The chapter gives a general overview on molecular structure and physicochemical properties of several drug containing ionic liquids and details the mechanisms which attribute to a typically fast dissolution, increased aqueous solubility as well as enhanced permeation which was reported in several publications. Chapter II translates the increased aqueous solubility of drugs by an organic counterion to the human gastrointestinal tract with taurocholate and lecithin as main drivers for the solubilization of highly lipophilic and poorly water-soluble drugs. Investigation of the interaction of imatinib - a poorly water-soluble weak base - with fasted- and fed state simulated intestinal fluids revealed a complex interplay between the components of the intestinal fluid and the drug. Mixed vesicles and micelles were observed in concentration dependent aggregation assays and revealed differences in their size, molecular arrangement as well as composition, depending on the tested drug concentration. Overall, the study outlines the effective interaction of weakly basic drugs with taurocholate and lecithin to minimize recrystallization during intestine passage finally leading to favorable supersaturation profiles. Chapter III focuses on the development of novel antibiotic counterions which potentially move the evolution of ionic liquids from a pharmaceutical salt with tailored physicochemical properties to a synergistic combination of two active pharmaceutical ingredients. The natural occurring anacardic acid derived from the cashew nut shell inspired a series of antibacterial active acidic compounds with increasing alkyl chain length. Their physicochemical properties, antibacterial activity, bacterial biofilm inhibition and cytotoxicity were detailed and in vivo activity in a Galleria mellonella model was assessed. This group of anacardic acid derivatives is synthetically accessible, easily modifiable and yielded two compounds with favorable activity and physicochemical profile for further drug development. Chapter IV outlines the potential application of anacardic acid derivatives in pharmaceutical formulations by salt formation with fluoroquinolone antibiotics as well as novel techniques such as 2D/3D printing for preparation of drug imprinted products. Despite anacardic acid derivatives demonstrated promising physicochemical properties, salt formation with fluoroquinolone antibiotics was not feasible. However, 2D/3D printed samples with anacardic acid derivative alone or in combination with ciprofloxacin demonstrated physical compatibility between drug and matrix as well as antibacterial activity against three S. aureus strains in an agar diffusion assay. Conclusively, drug printing can be applied for the herein tested compounds, but further process development is necessary. In summary, preparation of low melting ionic liquids, salts or co-crystals is an appropriate strategy to increase the aqueous solubility of poorly water-soluble drugs and tailor physicochemical properties. The counterion itself solubilizes the drug and furthermore potentially interferes with the complex micellar environment in the human intestine. However, salt formation as routinely used formulation strategy is not feasible in every case and development of alternative techniques is crucial to hurdle challenges related to unfavorable physicochemical properties. The outlined techniques for 2D/3D drug printing provide versatile production of drug products while extending the design space for novel drug development.},
  subject      = {L{\"o}slichkeit},
  language  = {en}
}
@phdthesis{Pawellek2021,
  author    = {Pawellek, Ruben},
  title     = {Charged Aerosol Detector Performance Evaluation and Development of Optimization Strategies for the Analysis of Amino Acids},
  doi       = {10.25972/OPUS-24319},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-243197},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {The charged aerosol detector (CAD) is an aerosol-based detector employed in liquid chromatography which has become established in the field of pharmaceutical analysis due to its outstanding performance characteristics, e.g. the almost uniform response for nonvolatile analytes. Owing to its principle of detection, the response of the CAD depends on the volatility of a compound and is inherently nonlinear. However, the newly implemented instrumental settings evaporation temperature and power function value (PFV) are valuable tools to overcome some of these drawbacks and can even enhance the detector's capabilities when adjusted properly. This thesis aimed to evaluate the impact of the new instrumental settings on the CAD performance. Additionally, the influence of modern separation techniques for small polar compounds on the CAD was assessed and the applicability of hyphenated UV-CAD techniques explored. The optimization strategies derived from the evaluation procedures and the conjunction of the instrumental and chromatographic techniques investigated were utilized for the challenging impurity profiling of amino acids and amino acid-like drugs. The results of the method validation procedures confirmed the broad applicability of the CAD in the pharmaceutical analysis of nonvolatile compounds, supported by satisfactory sensitivity and reproducibility for meeting the regulatory requirements with respect to the ICH guidelines Q2(R1) and Q3A(R2). The limits of applicability include the analysis of semivolatile compounds, and the method transfer between current and legacy CAD models. Further advances in the definition and standardization of allowed ranges for the instrumental settings and the establishment of general optimization procedures in the method development could lead to a more widespread use of the detection technique in compendial methods.},
  subject      = {Instrumentelle Analytik},
  language  = {en}
}
@phdthesis{Urlaub2021,
  author    = {Urlaub, Jonas},
  title     = {Development of analytical methods for the quality assessment of mineral oil based excipients and mechanochemically stressed active pharmaceutical ingredients},
  doi       = {10.25972/OPUS-24346},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-243465},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {For the quality assurance of substances for pharmaceutical use, a variety of analytical techniques are available to address specific analytical problems. In this field of application, liquid chromatography (LC) stands out as the gold standard in the pharmaceutical industry. Various detectors can be employed, which are e.g. based on UV/Vis spectroscopy for the examination of molecules with a chromophore, or mass spectrometry (MS) for structural elucidation of analytes. For the separation of enantiomers, the use of capillary electrophoresis (CE) may be more favorable due to the high separation efficiency and easy-to-use and comparatively inexpensive chiral selectors, in contrast to chiral columns for LC, which are usually very expensive and limited to a restricted number of analytes. For structure elucidation in impurity profiling, one- and multidimensional 1H NMR spectroscopy is a valuable tool as long as the analyte molecule has got nuclei that can be detected, which applies for the magnitude of organic pharmaceutical substances. For the evaluation of the amount of mineral oil aromatic hydrocarbons (MOAH) in various paraffin samples from different suppliers, a straightforward method based on 1H NMR spectroscopy was elaborated. The MOAH/MOSH ratio was used to indicate the amount of MOAH of paraffins and to evaluate the extent of refining. In addition, a representative paraffin sample was measured without sample solvent at high temperatures (about 340 K) to avoid the interfering residual solvent signals in the spectral regions of interest. The results of both methods were in good accordance. Moreover, the 1H NMR results were complemented with the UV measurements from the purity testing of paraffins according to the DAB 8. Correlations of the NMR and UV spectroscopic data indicated a linear relationship of both methods for the determination of MOAH in paraffins. Finally, the 1H NMR data was evaluated by principal component analysis (PCA) to explore differences within the paraffin samples and the spectral regions in the 1H NMR spectrum which are responsible for the formation of groups. It could be found that most variation is due to the MOSH of the paraffins. The PCA model was capable of differentiating between soft, liquid and solid paraffins on the one hand and between natural and synthetic liquid paraffins on the other hand. The impurity profiling of L-ascorbic acid 2-phosphate magnesium (A2PMg) was performed by means of one- and two-dimensional NMR spectroscopy. Several ethylated impurities could be detected, which were likely to be formed during synthesis of A2PMg. The structures of two of the ethylated impurities were identified as ascorbic acid 2-phosphate ethyl ester and ethanol, (residual solvent from synthesis). NMR spectroscopic studies of the fractions obtained from preparative HPLC of A2PMg revealed two additional impurities, which were identified as phosphorylated derivatives of ascorbic acid, ascorbic acid 3,5-phosphate and ascorbic acid 5-phosphate. Solid state mechanochemistry as an alternative approach for stress testing was applied on the drug substances S-Ibuprofen (Ibu) and Clopidogrel (CLP) using a ball mill, in order to study their degradation profile: First, the isomerization of S-Ibu was investigated, which was stressed in the solid state applying several milling frequencies and durations under basic, acidic and neutral conditions. For the separation of Ibu enantiomers, a chiral CE method was developed and validated according to ICH Q2(R1). It was found that S-Ibu is overall very stable to isomerization; it shows minor conversion into the R-enantiomer under basic environment applying long milling times and high frequencies. Last, the degradation profile of clopidogrel hydrogen sulfate (CLP) was investigated, which was stressed in the solid state under various oxidative conditions. An already existing HPLC-UV method was adjusted to sufficiently separate the degradation products, which were characterized by means of UV and MS/(MS) detection. Most of the degradation products identified were already reported to result from conventional CLP stress tests. The degradation profile of CLP was mainly influenced by the material of the milling jar and the type of catalyst used.},
  subject      = {HPLC},
  language  = {en}
}
@phdthesis{Dodt2021,
  author    = {Dodt, Katharina Anna},
  title     = {Monitoring enzyme activity by using mass-encoded peptides and multiplexed detection},
  doi       = {10.25972/OPUS-22937},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-229377},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Cell culture models are helpful tools to study inflammatory diseases, like rheumatoid arthritis (RA), osteoarthritis (OA), arteriosclerosis or asthma, which are linked to increased matrix metalloproteinase (MMP) activity. Such cell culture models often focus on the secretion of cytokines and growth factors or the direct effects of disease on tissue destruction. Even though the crucial role of MMPs in inflammatory diseases is known, the results of MMP studies are contradictious and the use of MMPs as biomarkers is inconsistent. MMPs play an important role in disease pathology, as they are involved in elastin degradation in the walls of alveoli in chronic obstructive pulmonary disease (COPD), tumor angiogenesis and metastasis and in cartilage and bone degradation in arthropathies. In RA and OA MMPs are secreted by osteocytes, synoviocytes, and by infiltrating immune cells in response to the increased concentration of inflammatory mediators, like growth factors and cytokines. MMPs are zinc and calcium-dependent proteinases and play an important role in physiological and pathological extracellular matrix (ECM) turn over. Their substrate specificity gives them the ability to degrade all major ECM components, like aggrecan, elastin, gelatin, fibronectin and all types of collagen even the triple helix of collagen monomers. The ECM consists of two large three-dimensional cross-linked macromolecule classes: one are fibrous proteins, like collagen and elastin fibers that are responsible for ECM's structure, tensile strength, resiliency, reversible extensibility, and deformability and the second class is comprised of proteoglycans composed of glycosaminoglycan (GAG) chains covalently attached to protein cores that are multifunctionally involved in signaling pathways and cell interactions. ECM is present within all tissues and organs and changes in ECM structure contribute to pathogenesis, e.g. wounded and fibrotic tissue, COPD or tumours. This thesis primarily focuses on the development of a diagnostic peptide system, that enables to gain information on MMP activity from ECM by deploying the isobaric mass encoding strategy. The core element of the developed system is an isotopically labelled peptide sequence (mass tag), that is released in response to elevated levels of MMPs and allows multiplexed detection in tandem mass spectrometry (LC-MS/MS). The mass reporters possess a modular structure with different functionalities. C-terminal either a transglutaminase (TG) recognition sequence or a high molecular weight polyethylene glycol (PEG) moiety was attached to immobilize the mass reporters covalently or physically at the injection site. The following matrix metalloproteinase substrate sequence (MSS) is incorporated in two different versions with different sensitivity to MMPs. The MSS were applied in pairs for relative quantification consisting of the cleavable version synthesized with natural L-amino acids and the non-cleavable D-amino acid variant. The mass tag was synthesized with isotopically labelled amino acids and is separated from the MSS by a UV light-sensitive molecule. N-terminal the mass tag is followed by a tobacco etch virus protease (TEV) sensitive sequence, that is responsible to separate the mass tag from the affinity tag, which was either the Strep-tag II sequence or biotin and were added for purification purposes. Chapter 1 presents a step-by-step protocol on how to design a mass tag family allowing for multiplexed analysis by LC-MS/MS. The multiplexing is achieved by developing an isobar mass tag family with four family members, which are chromatographically indistinguishable, but due to the mass encoding principles they fragment in distinct y-type ions with a mass difference of 1 or 2 Da each in MS2. Furthermore, it is explained how to covalently attach the mass reporter peptides onto ECM by the activated calcium-catalyzed blood coagulation transglutaminase factor XIII (FXIIIa). The lysine of mass reporter's TG sequence (D-domain of insulin-like growth factor-I (IGF-I)) and a glutamine in fibronectin are covalently crosslinked by FXIIIa and build an isopeptide bond. Elevated levels of MMP release the mass reporters from ECM by recognizing the inter-positioned MSS. The designed mass reporters were able to monitor enzyme activity in an in vitro setting with cell-derived ECM, which was shown in Chapter 2. The modular structured mass reporters were investigated in a proof of concept study. First, the different modules were characterized in terms of their MMP responsiveness and their sensitivity to TEV protease and UV light. Then the FXIIIa-mediated coupling reaction was detailed and the successful coupling on ECM was visualized by an immunosorbent assay or confocal laser scanning microscopy. Finally, the immobilized mass reporters on ECM were incubated with MMP-9 to investigate their multiplexing ability of MMP activity. The cleaved mass reporter fragments were purified in three steps and mass tags were analyzed as mix of all four in LC-MS/MS. Chapter 3 describes the change from an immobilizing system as seen in chapter 1 and 2 to a soluble enzyme activity monitoring system that was applied in an osteoarthritic mouse model. Instead of the immobilizing TG sequence the C-terminal MMS was extended with two amino acids where one holds an azide moiety to perform a strain-promoted azide-alkyne cycloaddition to a high molecular weight dibenzocyclooctyne-polyethylene glycol (DBCO-PEG), which was chosen to retain the mass reporters at the injection site. Furthermore, the N-terminal affinity tag was extended with a 2.5 kDa PEG chain to increase the half-life of the mass reporter peptides after MMP release. The systems biocompatibility was proved but its enzyme monitoring ability in an in vivo setting could not be analyzed as samples degraded during shipping resulting from the Chinese customs blocking transport to Germany. In summary the diagnostic peptide system was developed in two variants. The immobilized version one from chapter 1 and 2 was designed to be covalently attached to ECM by the transglutaminase-mediated cross-linking reaction. In an in vitro setting the functionality of the mass reporter system for the detection of MMP activity was successfully verified. The second variant comprises of a soluble mass reporter system that was tested in an OA mouse model and showed biocompatibility. With these two designed systems this thesis provides a flexible platform based on multiplexed analysis with mass-encoded peptides to characterize cell culture models regarding their MMP activity, to deploy cell-derived ECM as endogenous depot scaffold and to develop a mass tag family that enables simultaneous detection of at least four mass tags.},
  subject      = {Extrazellul{\"a}re Matrix},
  language  = {en}
}
@phdthesis{Lang2021,
  author    = {Lang, Florian},
  title     = {Analyse des Einflusses ausgew{\"a}hlter Polyphenole auf Funktionalit{\"a}t und Genexpression von p-Glykoprotein im CaCo-II-Zellkulturmodell},
  doi       = {10.25972/OPUS-25186},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251866},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Die Permeabilit{\"a}t von Substanzen {\"u}ber Biomembranen erfolgt auf Basis ihrer Gr{\"o}ße und Lipophilie, wird jedoch auch zu einem großen Anteil vom aktiven Transport bestimmt. Speziell im menschlichen Verdauungstrakt ist dieser Transportmechanismus neben seinen essentiellen physiologischen Aufgaben, wie den Transport von N{\"a}hrstoffen, an einer Resistenz gegen exogene Stoffe und Xenobiotika beteiligt, der die Aufnahme in den Organismus {\"u}ber einen R{\"u}cktransport in das Darmlumen limitiert. Dabei hat die membranst{\"a}ndige Effluxpumpe p-Glykoprotein (p-GP) als ein Baustein dieses Schutzmechanismus auch einen großen Einfluss auf die Arzneimitteltherapie. {\"U}ber eine Modulierung der Pharmakokinetik von Arzneistoffen beschr{\"a}nkt sie die Aufnahme von Medikamenten und senkt dadurch deren Bioverf{\"u}gbarkeit. Es wird auch f{\"u}r pflanzliche Inhaltsstoffe aus der Gruppe der Polyphenole ein m{\"o}glicher Einfluss auf dieses Transportprotein diskutiert. Diese Beeinflussung kann sich entweder in einer Induktion oder einer Inhibition des Proteins {\"a}ußern, was positive wie negative Effekte haben kann. Eine Hemmung des Transportproteins f{\"u}hrt zu einer erh{\"o}hten Aufnahme einiger Arzneistoffe, die mit einer erh{\"o}hten Bioverf{\"u}gbarkeit und einer potentiellen Dosissenkung einhergeht. Induziert man p-GP dagegen, so wird es beispielsweise erm{\"o}glicht, potentiell sch{\"a}dliche Xenobiotika noch intensiver auszuscheiden und nachteilige Plasmaspiegel zu verhindern. Im Rahmen der vorliegenden Arbeit sollte daher der Einfluss ausgew{\"a}hlter Polyphenole auf die Funktionalit{\"a}t und die Genexpression im CaCo-II-Zellkulturmodell n{\"a}her untersucht, sowie vorab charakteristische Eigenschaften der pflanzlichen Inhaltsstoffe - Taxifolin, Silibinin, M1, Urolithin A, Urolithin B, Urolithin C, Isourolithin A, racemisches Hydnocarpin D, (+)-Hydnocarpin D, (-)-Hydnocarpin D - vergleichend bestimmt werden. Diese stoffspezifischen Charakteristika umfassten die Zytotoxizit{\"a}t, die Stabilit{\"a}t und die antioxidative Kapazit{\"a}t. Vor allem die Zytotoxizit{\"a}t und die Stabilit{\"a}t sind essentielle Parameter f{\"u}r aussagekr{\"a}ftige Resultate. Die Substanzen waren in der eingesetzten Konzentration von 50 µM mehrheitlich, mit Ausnahme des Hydnocarpins D, nicht-toxisch innerhalb der relevanten Versuchszeitr{\"a}ume, 4 h und 24 h, und den verwendeten Kulturmedien, DMEM-Pest und HBSS. Vor allem im Hinblick auf die Genexpressionsversuche war es die Basis f{\"u}r valide Ergebnisse, den Zeitraum bis 24 h als nicht-toxisch sicherstellen zu k{\"o}nnen. Hinsichtlich der Stabilit{\"a}t waren nur Taxifolin (27 \% Restkonzentration) und der M1 (0 \% Restkonzentration) nach 24 h in Zellkulturmedium kritisch. Auf Basis ihrer antioxidativen Kapazit{\"a}t werden pflanzlichen Inhaltsstoffen eine Reihe von gesundheitsf{\"o}rderlichen Merkmalen nachgesagt, weswegen dieser Aspekt f{\"u}r die Testsubstanzen zus{\"a}tzlich vergleichend evaluiert wurde. Der Eintritt von Pathogenen kann Zusammenfassung 377 zum Beispiel durch oxidative Sch{\"a}digung des Darmepithels erleichtert werden, was zus{\"a}tzlich zu einem Effekt auf p-GP durch die Polyphenole unter Umst{\"a}nden positiv beeinflusst werden kann. Taxifolin, der M1 sowie die Urolithine A und C konnten so als antioxidativ aktive Stoffe erstmals vergleichend analysiert und die Resultate sinnvoll zu bestehenden Daten in Relation gesetzt werden. Sie konnten nach antioxidativer Potenz in der Reihenfolge Urolithin C > M1 > Taxifolin > Urolithin A geordnet werden. Zur Analyse des Einflusses der ausgew{\"a}hlten Polyphenole auf die Funktionalit{\"a}t von p-GP sollten Transportversuche {\"u}ber einen CaCo-II-Monolayer mit Rhodamin 123 als Markersubstanz durchgef{\"u}hrt werden. Diese Untersuchungen ben{\"o}tigen typischerweise eine vorbereitende Kulturzeit der Zellen von insgesamt drei Wochen, sodass sich eine Verk{\"u}rzung dieser Zeitspanne aus Zeitersparnis- und Kostengr{\"u}nden positiv auf den Durchsatz der Versuche auswirken w{\"u}rde. In einem umfassenden Ansatz mit kombinierter Bestimmung der Qualifizierung der Zellschichten im Hinblick auf Qualit{\"a}t des Monolayers (TEER-Messung, Lucifer-Yellow-Transportrate, Fluoreszenzf{\"a}rbung der Tight-junctions) sowie der Funktionalit{\"a}t und Expression von p-GP gelang der Nachweis, dass 14 Tage hinreichend und sinnvoll waren. Zentraler Bestandteil war in der vorliegenden Arbeit die Identifizierung der Effekte der Urolithine auf sowohl p-GP direkt, als auch auf die Genexpression dieses Transportproteins. Diese Polyphenole werden im menschlichen Verdauungstrakt {\"u}ber einen bakteriellen Metabolismus aus Ellagtanninen und Ellags{\"a}ure hergestellt und sind aufgrund ihrer vielf{\"a}ltigen gesundheitsf{\"o}rderlichen Charakteristiken in der Forschung von steigendem Interesse. Hierf{\"u}r konnten nach unserem Kenntnisstand mit den gew{\"a}hlten Versuchsans{\"a}tzen neue Erkenntnisse gewonnen werden. In den Transportversuchen mit Rhodamin 123 als Modellsubstrat von p-GP konnten die Urolithine den p-GP-vermittelten Transport positiv beeinflussen. Die Urolithine B (Papp-Ratio 1,98), C (Papp-Ratio 2,15) und das Isourolithin A (Papp-Ratio 1,63) steigerten den Rhodamintransport signifikant und lediglich f{\"u}r Urolithin A (Papp-Ratio 1,45) konnte keine Signifikanz belegt werden. Der Einfluss der Urolithine lag jeweils im Bereich des Modellinduktors Dexamethason. Ebenso konnte eine positive Modulierung der Genexpression nach 24 h detektiert werden. Die Hochregulierungen durch die Urolithine A (zwei- bis dreifach), B (1,4-fach) und C (1,8-fach) waren konsistent und statistisch signifikant. Urolithin A konnte hierbei als potentester Induktor charakterisiert werden, wohingegen sein Isomer Isourolithin A keinerlei signifikante Beeinflussung der Expression zeigte. In diesen Inkubationsversuchen wurde die Eigenschaft zur Erh{\"o}hung der Genexpression {\"u}ber den Einfluss auf den p-GP-vermittelten Rhodamintransport best{\"a}tigt. Die Urolithine A, B, C und Isourolithin A konnten nach einer Vorinkubation {\"u}ber 24 h und 48 h auch den Transport von Rhodamin 123 nochmals signifikanter zu den klassischen E Zusammenfassung 378 Transportversuchen ohne Vorinkubation steigern. Relevanz hierf{\"u}r hatte der erste Zeitraum {\"u}ber 24 h, da hier ein deutlicher Anstieg der Rhodamintransportrate zu erkennen war. Nach 48 h stieg der Rhodamintransport nur noch geringf{\"u}gig an oder ging sogar leicht zur{\"u}ck (Urolithin B). Hinsichtlich der Genexpression konnte nach 48 h nur noch Urolithin C p-GP signifikant hochregulieren, allerdings sind diese Erkenntnisse auf Basis der Zytotoxizit{\"a}t der Substanzen {\"u}ber diesen Zeitraum kritisch zu betrachten. In der Analyse des Effektes der weiteren Polyphenole auf die Genexpression von p-GP konnten f{\"u}r die meisten Stoffe nur zuf{\"a}llige Zusammenh{\"a}nge hinsichtlich Hoch- und Herunterregulierung bestimmt werden. In den Transportversuchen konnte jedoch (+)-Hydnocarpin (Papp-Ratio 0,48) den Transport in gleichem Ausmaß wie der Modellinhibitor Verapamil (Papp-Ratio 0,48) hemmen. Durch Modifizierung des Versuchsmediums zur Ann{\"a}herung an physiologischeren Bedingungen (Gallens{\"a}uren, pH 6) konnte f{\"u}r manche Substanzen ein deutlich ver{\"a}ndertes Verhalten beobachtet werden. Die Rhodamintransportrate nahm unter Einfluss von Urolithin B, Isourolithin A und dem M1 signifikant nun ab und bei Urolithin C signifikant zu. Dies legt nahe, dass mit dem klassischen Transportversuchsmodell lediglich Tendenzen f{\"u}r die Substanzen bestimmt werden k{\"o}nnen. Weitere Untersuchungen n{\"a}her an der Physiologie des Verdauungstraktes sind n{\"o}tig, um ein genaueres Bild des Stoffeinflusses zu gewinnen. Die Frage nach zeitlichem Einsetzen beziehungsweise der Kontinuit{\"a}t des Effektes auf p� GP konnte mit den Urolithinen A, B und C sowie Dexamethason gekl{\"a}rt werden. Eine Substanzexposition von lediglich f{\"u}nf Minuten war nicht ausreichend, um in den nachfolgenden zwei Stunden einen Effekt zu beobachten. Dies legt eine Reversibilit{\"a}t der zugrundeliegenden Mechanismen und eine notwendige dauerhafte Anwesenheit der Substanzen {\"u}ber die Versuchszeit nahe. Neben Rhodamin 123 wurden noch Transportversuche mit dem Fluorchinolonantibiotikum Ciprofloxacin als Modellsubstanz durchgef{\"u}hrt, da es aufgrund dessen Substratcharakters f{\"u}r p-GP von therapeutischer Relevanz sein kann, wenn das Transportverhalten durch Polyphenole beeinflusst wird. Im Gegensatz zu Rhodamin 123 wurde der Transport von Ciprofloxacin durch die vier Urolithine verringert, was f{\"u}r diese Metabolismusprodukte eine zus{\"a}tzliche Wirkung auf weitere Transportproteine nahelegt, weil Ciprofloxacin unter anderem auch {\"u}ber BRCP transportiert wird. Mittels des bakteriellen Endotoxins LPS konnte eine Sch{\"a}digung des CaCo-II-Monolayers erzeugt werden, welche sich {\"u}ber erniedrigte TEER-Werte und einen erh{\"o}hten Rhodamintransport nachweisen ließ. Eine Vorinkubation der vier Urolithine war nicht in der Lage, diese Sch{\"a}digung abzumildern, jedoch nicht komplett zu verhindern. Die TEER- Zusammenfassung 379 Werte konnten zwar wieder etwas gesteigert werden, jedoch maskierte die starke Stimulation dieser Pflanzenstoffe auf p-GP und den damit verbundenen Transport von Rhodamin 123 m{\"o}gliche positive Effekte auf diese oxidative Stresssituation. Zusammenfassend war es mit der vorliegenden Arbeit erstmals durch systematische vergleichende Untersuchung und Kombination von Charakterisierungsans{\"a}tzen m{\"o}glich, eine deutliche Beeinflussung der Genexpression und Funktionalit{\"a}t des p-Glykoproteins durch vor allem die Urolithine aufzuzeigen, was eine Relevanz sowohl des Mikrobioms als auch der Ern{\"a}hrung in der Arzneimitteltherapie nahelegt. Zudem gelang es den klassischen Transportassay durch Verk{\"u}rzung um eine Woche zu verbessern.},
  subject      = {p-Glykoprotein},
  language  = {de}
}
@article{LeistnerHolzgrabe2021,
  author    = {Leistner, Adrian and Holzgrabe, Ulrike},
  title     = {Impurity Profiling of Baclofen Using Gradient HPLC-UV Method},
  series = {Chromatographia},
  volume    = {84},
  journal   = {Chromatographia},
  number    = {10},
  issn      = {1612-1112},
  doi       = {10.1007/s10337-021-04079-y},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-268921},
  pages     = {927-935},
  year      = {2021},
  abstract  = {The GABA\(_{B}\) receptor agonist baclofen is a medication commonly used for the treatment of muscle spasticity. It is an amino acid and related to the neurotransmitter GABA. In this study, we developed a new, gradient high-performance liquid chromatography (HPLC) method for the impurity assessment of baclofen, which is appropriate for pharmacopoeial purposes. Since the impurities related to the synthesis pathway are acids, zwitterionic, or neutral, the method development is challenging. However, the separation of all components was achieved on a C18 stationary phase using a water-acetonitrile-trifluoroacetic acid gradient. A limit of detection (LOD) of at least 0.02\% was registered for all specified impurities. Additionally, CAD detection was performed to detect potential impurities lacking off a chromophore. The baclofen batches analyzed are far more pure than expected. All impurities were found below the specification limit, and thus, they can be regarded as unspecified. Moreover, the required runtime could be significantly reduced compared to the current USP or Ph. Eur. method.},
  language  = {en}
}
@article{WelkerKerstenMuelleretal.2021,
  author    = {Welker, Armin and Kersten, Christian and M{\"u}ller, Christin and Madhugiri, Ramakanth and Zimmer, Collin and M{\"u}ller, Patrick and Zimmermann, Robert and Hammerschmidt, Stefan and Maus, Hannah and Ziebuhr, John and Sotriffer, Christoph and Schirmeister, Tanja},
  title     = {Structure-Activity Relationships of Benzamides and Isoindolines Designed as SARS-CoV Protease Inhibitors Effective against SARS-CoV-2},
  series = {ChemMedChem},
  volume    = {16},
  journal   = {ChemMedChem},
  number    = {2},
  doi       = {10.1002/cmdc.202000548},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-225700},
  pages     = {340 -- 354},
  year      = {2021},
  abstract  = {Inhibition of coronavirus (CoV)-encoded papain-like cysteine proteases (PL\(^{pro}\)) represents an attractive strategy to treat infections by these important human pathogens. Herein we report on structure-activity relationships (SAR) of the noncovalent active-site directed inhibitor (R)-5-amino-2-methyl-N-(1-(naphthalen-1-yl)ethyl) benzamide (2 b), which is known to bind into the S3 and S4 pockets of the SARS-CoV PL\(^{pro}\). Moreover, we report the discovery of isoindolines as a new class of potent PL\(^{pro}\) inhibitors. The studies also provide a deeper understanding of the binding modes of this inhibitor class. Importantly, the inhibitors were also confirmed to inhibit SARS-CoV-2 replication in cell culture suggesting that, due to the high structural similarities of the target proteases, inhibitors identified against SARS-CoV PL\(^{pro}\) are valuable starting points for the development of new pan-coronaviral inhibitors.},
  language  = {en}
}
@article{AltmannMutWolfetal.2021,
  author    = {Altmann, Stephan and Mut, J{\"u}rgen and Wolf, Natalia and Meißner-Weigl, Jutta and Rudert, Maximilian and Jakob, Franz and Gutmann, Marcus and L{\"u}hmann, Tessa and Seibel, J{\"u}rgen and Ebert, Regina},
  title     = {Metabolic glycoengineering in hMSC-TERT as a model for skeletal precursors by using modified azide/alkyne monosaccharides},
  series = {International Journal of Molecular Sciences},
  volume    = {22},
  journal   = {International Journal of Molecular Sciences},
  number    = {6},
  issn      = {1422-0067},
  doi       = {10.3390/ijms22062820},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-259247},
  year      = {2021},
  abstract  = {Metabolic glycoengineering enables a directed modification of cell surfaces by introducing target molecules to surface proteins displaying new features. Biochemical pathways involving glycans differ in dependence on the cell type; therefore, this technique should be tailored for the best results. We characterized metabolic glycoengineering in telomerase-immortalized human mesenchymal stromal cells (hMSC-TERT) as a model for primary hMSC, to investigate its applicability in TERT-modified cell lines. The metabolic incorporation of N-azidoacetylmannosamine (Ac\(_4\)ManNAz) and N-alkyneacetylmannosamine (Ac\(_4\)ManNAl) into the glycocalyx as a first step in the glycoengineering process revealed no adverse effects on cell viability or gene expression, and the in vitro multipotency (osteogenic and adipogenic differentiation potential) was maintained under these adapted culture conditions. In the second step, glycoengineered cells were modified with fluorescent dyes using Cu-mediated click chemistry. In these analyses, the two mannose derivatives showed superior incorporation efficiencies compared to glucose and galactose isomers. In time-dependent experiments, the incorporation of Ac\(_4\)ManNAz was detectable for up to six days while Ac\(_4\)ManNAl-derived metabolites were absent after two days. Taken together, these findings demonstrate the successful metabolic glycoengineering of immortalized hMSC resulting in transient cell surface modifications, and thus present a useful model to address different scientific questions regarding glycosylation processes in skeletal precursors.},
  language  = {en}
}
@article{PawellekKrmarLeistneretal.2021,
  author    = {Pawellek, Ruben and Krmar, Jovana and Leistner, Adrian and Djajić, Nevena and Otašević, Biljana and Protić, Ana and Holzgrabe, Ulrike},
  title     = {Charged aerosol detector response modeling for fatty acids based on experimental settings and molecular features: a machine learning approach},
  series = {Journal of Cheminformatics},
  volume    = {13},
  journal   = {Journal of Cheminformatics},
  number    = {1},
  doi       = {10.1186/s13321-021-00532-0},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-261618},
  year      = {2021},
  abstract  = {The charged aerosol detector (CAD) is the latest representative of aerosol-based detectors that generate a response independent of the analytes' chemical structure. This study was aimed at accurately predicting the CAD response of homologous fatty acids under varying experimental conditions. Fatty acids from C12 to C18 were used as model substances due to semivolatile characterics that caused non-uniform CAD behaviour. Considering both experimental conditions and molecular descriptors, a mixed quantitative structure-property relationship (QSPR) modeling was performed using Gradient Boosted Trees (GBT). The ensemble of 10 decisions trees (learning rate set at 0.55, the maximal depth set at 5, and the sample rate set at 1.0) was able to explain approximately 99\% (Q\(^2\): 0.987, RMSE: 0.051) of the observed variance in CAD responses. Validation using an external test compound confirmed the high predictive ability of the model established (R-2: 0.990, RMSEP: 0.050). With respect to the intrinsic attribute selection strategy, GBT used almost all independent variables during model building. Finally, it attributed the highest importance to the power function value, the flow rate of the mobile phase, evaporation temperature, the content of the organic solvent in the mobile phase and the molecular descriptors such as molecular weight (MW), Radial Distribution Function-080/weighted by mass (RDF080m) and average coefficient of the last eigenvector from distance/detour matrix (Ve2_D/Dt). The identification of the factors most relevant to the CAD responsiveness has contributed to a better understanding of the underlying mechanisms of signal generation. An increased CAD response that was obtained for acetone as organic modifier demonstrated its potential to replace the more expensive and environmentally harmful acetonitrile.},
  language  = {en}
}
@article{AghaiZimmermannKurlbaumetal.2021,
  author    = {Aghai, Fatemeh and Zimmermann, Sebastian and Kurlbaum, Max and Jung, Pius and Pelzer, Theo and Klinker, Hartwig and Isberner, Nora and Scherf-Clavel, Oliver},
  title     = {Development and validation of a sensitive liquid chromatography tandem mass spectrometry assay for the simultaneous determination of ten kinase inhibitors in human serum and plasma},
  series = {Analytical and Bioanalytical Chemistry},
  volume    = {413},
  journal   = {Analytical and Bioanalytical Chemistry},
  issn      = {1618-2642},
  doi       = {10.1007/s00216-020-03031-7},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-231925},
  pages     = {599-612},
  year      = {2021},
  abstract  = {A liquid chromatography tandem mass spectrometry method for the analysis of ten kinase inhibitors (afatinib, axitinib, bosutinib,cabozantinib, dabrafenib, lenvatinib, nilotinib, osimertinib, ruxolitinib, and trametinib) in human serum and plasma for theapplication in daily clinical routine has been developed and validated according to the US Food and Drug Administration andEuropean Medicines Agency validation guidelines for bioanalytical methods. After protein precipitation of plasma samples withacetonitrile, chromatographic separation was performed at ambient temperature using a Waters XBridge® Phenyl 3.5μm(2.1×50 mm) column. The mobile phases consisted of water-methanol (9:1, v/v) with 10 mM ammonium bicarbonate as phase A andmethanol-water (9:1, v/v) with 10 mM ammonium bicarbonate as phase B. Gradient elution was applied at a flow rate of 400μL/min. Analytes were detected and quantified using multiple reaction monitoring in electrospray ionization positive mode. Stableisotopically labeled compounds of each kinase inhibitor were used as internal standards. The acquisition time was 7.0 min perrun. All analytes and internal standards eluted within 3.0 min. The calibration curves were linear over the range of 2-500 ng/mLfor afatinib, axitinib, bosutinib, lenvatinib, ruxolitinib, and trametinib, and 6-1500 ng/mL for cabozantinib, dabrafenib, nilotinib,and osimertinib (coefficients of correlation≥0.99). Validation assays for accuracy and precision, matrix effect, recovery,carryover, and stability were appropriate according to regulatory agencies. The rapid and sensitive assay ensures high throughputand was successfully applied to monitor concentrations of kinase inhibitors in patients.},
  language  = {en}
}
@article{SchlauersbachHanioLenzetal.2021,
  author    = {Schlauersbach, Jonas and Hanio, Simon and Lenz, Bettina and Vemulapalli, Sahithya P. B. and Griesinger, Christian and P{\"o}ppler, Ann-Christin and Harlacher, Cornelius and Galli, Bruno and Meinel, Lorenz},
  title     = {Leveraging bile solubilization of poorly water-soluble drugs by rational polymer selection},
  series = {Journal of Controlled Release},
  volume    = {330},
  journal   = {Journal of Controlled Release},
  edition   = {Accepted Version},
  doi       = {10.1016/j.jconrel.2020.12.016},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-296957},
  pages     = {36-48},
  year      = {2021},
  abstract  = {Poorly water-soluble drugs frequently solubilize into bile colloids and this natural mechanism is key for efficient bioavailability. We tested the impact of pharmaceutical polymers on this solubilization interplay using proton nuclear magnetic resonance spectroscopy, dynamic light scattering, and by assessing the flux across model membranes. Eudragit E, Soluplus, and a therapeutically used model polymer, Colesevelam, impacted the bile-colloidal geometry and molecular interaction. These polymer-induced changes reduced the flux of poorly water-soluble and bile interacting drugs (Perphenazine, Imatinib) but did not impact the flux of bile non-interacting Metoprolol. Non-bile interacting polymers (Kollidon VA 64, HPMC-AS) neither impacted the flux of colloid-interacting nor colloid-non-interacting drugs. These insights into the drug substance/polymer/bile colloid interplay potentially point towards a practical optimization parameter steering formulations to efficient bile-solubilization by rational polymer selection.},
  language  = {en}
}
@article{MasotaVoggOhlsenetal.2021,
  author    = {Masota, Nelson E. and Vogg, Gerd and Ohlsen, Knut and Holzgrabe, Ulrike},
  title     = {Reproducibility challenges in the search for antibacterial compounds from nature},
  series = {PLoS One},
  volume    = {16},
  journal   = {PLoS One},
  number    = {7},
  doi       = {10.1371/journal.pone.0255437},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-260239},
  year      = {2021},
  abstract  = {Background Reproducibility of reported antibacterial activities of plant extracts has long remained questionable. Although plant-related factors should be well considered in serious pharmacognostic research, they are often not addressed in many research papers. Here we highlight the challenges in reproducing antibacterial activities of plant extracts. Methods Plants with reported antibacterial activities of interest were obtained from a literature review. Antibacterial activities against Escherichia coli and Klebsiella pneumoniae were tested using extracts' solutions in 10\% DMSO and acetone. Compositions of working solutions from both solvents were established using LC-MS analysis. Moreover, the availability of details likely to affect reproducibility was evaluated in articles which reported antibacterial activities of studied plants. Results Inhibition of bacterial growth at MIC of 256-1024 μg/mL was observed in only 15.4\% of identical plant species. These values were 4-16-fold higher than those reported earlier. Further, 18.2\% of related plant species had MICs of 128-256 μg/mL. Besides, 29.2\% and 95.8\% of the extracts were soluble to sparingly soluble in 10\% DMSO and acetone, respectively. Extracts' solutions in both solvents showed similar qualitative compositions, with differing quantities of corresponding phytochemicals. Details regarding seasons and growth state at collection were missing in 65\% and 95\% of evaluated articles, respectively. Likewise, solvents used to dissolve the extracts were lacking in 30\% of the articles, whereas 40\% of them used unidentified bacterial isolates. Conclusion Reproducibility of previously reported activities from plants' extracts is a multi-factorial aspect. Thus, collective approaches are necessary in addressing the highlighted challenges.},
  language  = {en}
}
@article{IsbernerKrausGrigoleitetal.2021,
  author    = {Isberner, Nora and Kraus, Sabrina and Grigoleit, G{\"o}tz Ulrich and Aghai, Fatemeh and Kurlbaum, Max and Zimmermann, Sebastian and Klinker, Hartwig and Scherf-Clavel, Oliver},
  title     = {Ruxolitinib exposure in patients with acute and chronic graft versus host disease in routine clinical practice-a prospective single-center trial},
  series = {Cancer Chemotherapy and Pharmacology},
  volume    = {88},
  journal   = {Cancer Chemotherapy and Pharmacology},
  number    = {6},
  issn      = {1432-0843},
  doi       = {10.1007/s00280-021-04351-w},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-266476},
  pages     = {973-983},
  year      = {2021},
  abstract  = {Purpose Knowledge on Ruxolitinib exposure in patients with graft versus host disease (GvHD) is scarce. The purpose of this prospective study was to analyze Ruxolitinib concentrations of GvHD patients and to investigate effects of CYP3A4 and CYP2C9 inhibitors and other covariates as well as concentration-dependent effects. Methods 262 blood samples of 29 patients with acute or chronic GvHD who were administered Ruxolitinib during clinical routine were analyzed. A population pharmacokinetic model obtained from myelofibrosis patients was adapted to our population and was used to identify relevant pharmacokinetic properties and covariates on drug exposure. Relationships between Ruxolitinib exposure and adverse events were assessed. Results Median of individual mean trough serum concentrations was 39.9 ng/mL at 10 mg twice daily (IQR 27.1 ng/mL, range 5.6-99.8 ng/mL). Applying a population pharmacokinetic model revealed that concentrations in our cohort were significantly higher compared to myelofibrosis patients receiving the same daily dose (p < 0.001). Increased Ruxolitinib exposure was caused by a significant reduction in Ruxolitinib clearance by approximately 50\%. Additional comedication with at least one strong CYP3A4 or CYP2C9 inhibitor led to a further reduction by 15\% (p < 0.05). No other covariate affected pharmacokinetics significantly. Mean trough concentrations of patients requiring dose reduction related to adverse events were significantly elevated (p < 0.05). Conclusion Ruxolitinib exposure is increased in GvHD patients in comparison to myelofibrosis patients due to reduced clearance and comedication with CYP3A4 or CYP2C9 inhibitors. Elevated Ruxolitinib trough concentrations might be a surrogate for toxicity.},
  language  = {en}
}
@article{JanzenSlavikZeheetal.2021,
  author    = {Janzen, Dieter and Slavik, Benedikt and Zehe, Markus and Sotriffer, Christoph and Loos, Helene M. and Buettner, Andrea and Villmann, Carmen},
  title     = {Sesquiterpenes and sesquiterpenoids harbor modulatory allosteric potential and affect inhibitory GABA\(_{A}\) receptor function in vitro},
  series = {Journal of Neurochemistry},
  volume    = {159},
  journal   = {Journal of Neurochemistry},
  number    = {1},
  doi       = {10.1111/jnc.15469},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-259546},
  pages     = {101-115},
  year      = {2021},
  abstract  = {Naturally occurring compounds such as sesquiterpenes and sesquiterpenoids (SQTs) have been shown to modulate GABA\(_{A}\) receptors (GABA\(_{A}\)Rs). In this study, the modulatory potential of 11 SQTs at GABA\(_{A}\)Rs was analyzed to characterize their potential neurotropic activity. Transfected HEK293 cells and primary hippocampal neurons were functionally investigated using electrophysiological whole-cell recordings. Significantly different effects of β-caryophyllene and α-humulene, as well as their respective derivatives β-caryolanol and humulol, were observed in the HEK293 cell system. In neurons, the concomitant presence of phasic and tonic GABA\(_{A}\)R configurations accounts for differences in receptor modulation by SQTs. The in vivo presence of the γ\(_{2}\) and δ subunits is important for SQT modulation. While phasic GABA\(_{A}\) receptors in hippocampal neurons exhibited significantly altered GABA-evoked current amplitudes in the presence of humulol and guaiol, negative allosteric potential at recombinantly expressed α\(_{1}\)β\(_{2}\)γ\(_{2}\) receptors was only verified for humolol. Modeling and docking studies provided support for the binding of SQTs to the neurosteroid-binding site of the GABA\(_{A}\)R localized between transmembrane segments 1 and 3 at the (\(^{+}\)α)-(\(^{-}\)α) interface. In sum, differences in the modulation of GABA\(_{A}\)R isoforms between SQTs were identified. Another finding is that our results provide an indication that nutritional digestion affects the neurotropic potential of natural compounds.},
  language  = {en}
}
@phdthesis{Gentzsch2021,
  author    = {Gentzsch, Christian},
  title     = {Molecular Imaging of Opioid Receptors and Butyrylcholinesterase with Selective, Tailored Probes Using Positron Emission Tomography and Fluorescence Microscopy},
  doi       = {10.25972/OPUS-24752},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-247529},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {The present thesis concerns the molecular imaging of opioid receptors and human butyrylcholinesterase with the aid of tailored probes, which are suitable for the respective applied imaging techniques. The first part focusses on imaging of opioid receptors with selective probes using total internal reflection- and single molecule fluorescence microscopy. Design and synthesis of the ligands are presented and their pharmacological characterization and application in microscopy experiments are shown. The second part of this thesis focused on the development of 18F-labeled, selective radiotracers for imaging of butyrylcholinesterase via positron emission tomography. The design and synthesis of each a reversible and pseudoirreversible 18F-labeled tracer are presented. After evaluation of the binding properties of each tracer, their initial application in ex vivo autoradiography- and preliminary in vivo microPET studies is described and analyzed.},
  subject      = {Fluoreszenzmikroskopie},
  language  = {en}
}
@article{McLaughlinSchmulensonTeplytskaetal.2021,
  author    = {Mc Laughlin, Anna M. and Schmulenson, Eduard and Teplytska, Olga and Zimmermann, Sebastian and Opitz, Patrick and Groenland, Stefanie L. and Huitema, Alwin D. R. and Steeghs, Neeltje and M{\"u}ller, Lothar and Fuxius, Stefan and Illerhaus, Gerald and Joerger, Markus and Mayer, Frank and Fuhr, Uwe and Holdenrieder, Stefan and Hempel, Georg and Scherf-Clavel, Oliver and Jaehde, Ulrich and Kloft, Charlotte},
  title     = {Developing a nationwide infrastructure for therapeutic drug monitoring of targeted oral anticancer drugs: the ON-TARGET study protocol},
  series = {Cancers},
  volume    = {13},
  journal   = {Cancers},
  number    = {24},
  issn      = {2072-6694},
  doi       = {10.3390/cancers13246281},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-252196},
  year      = {2021},
  abstract  = {Exposure-efficacy and/or exposure-toxicity relationships have been identified for up to 80\% of oral anticancer drugs (OADs). Usually, OADs are administered at fixed doses despite their high interindividual pharmacokinetic variability resulting in large differences in drug exposure. Consequently, a substantial proportion of patients receive a suboptimal dose. Therapeutic Drug Monitoring (TDM), i.e., dosing based on measured drug concentrations, may be used to improve treatment outcomes. The prospective, multicenter, non-interventional ON-TARGET study (DRKS00025325) aims to investigate the potential of routine TDM to reduce adverse drug reactions in renal cell carcinoma patients receiving axitinib or cabozantinib. Furthermore, the feasibility of using volumetric absorptive microsampling (VAMS), a minimally invasive and easy to handle blood sampling technique, for sample collection is examined. During routine visits, blood samples are collected and sent to bioanalytical laboratories. Venous and VAMS blood samples are collected in the first study phase to facilitate home-based capillary blood sampling in the second study phase. Within one week, the drug plasma concentrations are measured, interpreted, and reported back to the physician. Patients report their drug intake and toxicity using PRO-CTCAE-based questionnaires in dedicated diaries. Ultimately, the ON-TARGET study aims to develop a nationwide infrastructure for TDM for oral anticancer drugs.},
  language  = {en}
}
@article{HofmannGinexEspargaroetal.2021,
  author    = {Hofmann, Julian and Ginex, Tiziana and Espargar{\´o}, Alba and Scheiner, Matthias and Gunesch, Sandra and Arag{\´o}, Marc and Stigloher, Christian and Sabat{\´e}, Raimon and Luque, F. Javier and Decker, Michael},
  title     = {Azobioisosteres of Curcumin with Pronounced Activity against Amyloid Aggregation, Intracellular Oxidative Stress, and Neuroinflammation},
  series = {Chemistry - A European Journal},
  volume    = {27},
  journal   = {Chemistry - A European Journal},
  number    = {19},
  doi       = {10.1002/chem.202005263},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-238988},
  pages     = {6015 -- 6027},
  year      = {2021},
  abstract  = {Many (poly-)phenolic natural products, for example, curcumin and taxifolin, have been studied for their activity against specific hallmarks of neurodegeneration, such as amyloid-β 42 (Aβ42) aggregation and neuroinflammation. Due to their drawbacks, arising from poor pharmacokinetics, rapid metabolism, and even instability in aqueous medium, the biological activity of azobenzene compounds carrying a pharmacophoric catechol group, which have been designed as bioisoteres of curcumin has been examined. Molecular simulations reveal the ability of these compounds to form a hydrophobic cluster with Aβ42, which adopts different folds, affecting the propensity to populate fibril-like conformations. Furthermore, the curcumin bioisosteres exceeded the parent compound in activity against Aβ42 aggregation inhibition, glutamate-induced intracellular oxidative stress in HT22 cells, and neuroinflammation in microglial BV-2 cells. The most active compound prevented apoptosis of HT22 cells at a concentration of 2.5 μm (83 \% cell survival), whereas curcumin only showed very low protection at 10 μm (21 \% cell survival).},
  language  = {en}
}
@phdthesis{Ferraro2021,
  author    = {Ferraro, Antonio},
  title     = {Entwicklung potenzieller (ir-)reversibler Inhibitoren der Enoyl-ACP-Reduktase FabI in S. aureus/ E. coli und der Thiolase FadA5 in M. tuberculosis},
  doi       = {10.25972/OPUS-23839},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-238392},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Antimikrobielle Resistenzen stellen eine weltweite Herausforderung dar und sind mit einer hohen Morbidit{\"a}t und Mortalit{\"a}t verbunden. Die Letalit{\"a}tsrate durch multiresistente Keime steigt stetig an, weshalb die WHO im Jahr 2017 eine Priorit{\"a}tenliste resistenter Keime erstellte, die die Entwicklung neuer Antibiotika vorantreiben soll. Diese umfasst vornehmlich gramnegative Bakterien, da diese aufgrund ihres Zellaufbaus sowie diverser Resistenzmechanismen besonders widerstandsf{\"a}hig gegen{\"u}ber dem Angriff vieler Antibiotika sind. Einige grampositive Keime (z.B. S. aureus) stehen ebenfalls auf dieser Liste und stellen eine große Herausforderung f{\"u}r die Medizin dar. Infolgedessen ist die Entwicklung neuer Antiinfektiva mit neuen Angriffspunkten gegen resistente Pathogene zwingend n{\"o}tig, um mit bisherigen Resistenzen umgehen zu k{\"o}nnen. Die vorliegende Arbeit besch{\"a}ftigt sich mit der Entwicklung und Synthese von kovalent (reversibel) bindenden Inhibitoren der Enoyl-ACP-Reduktase FabI (Staphylococcus aureus, Escherichia coli) und der Thiolase FadA5 (Mycobacterium tuberculosis). Beide Enzyme sind essenziell f{\"u}r das {\"U}berleben des jeweiligen Bakteriums. FabI ist ein wichtiges und geschwindigkeitsbestimmendes Schl{\"u}sselenzym der Fetts{\"a}uresynthese Typ II diverser Bakterien. Hierbei werden wichtige Phospholipide hergestellt, die f{\"u}r den Aufbau der Zellmembran n{\"o}tig sind. Schiebel et al. ist es gelungen, einen potenten Inhibitor f{\"u}r den Erreger S. aureus sowie E. coli zu entwickeln und zu charakterisieren. Ausgehend von dieser Verbindung wurde eine Substanzbibliothek mit verschiedenen „warheads" hergestellt. Hierbei wurde die Verkn{\"u}pfung zwischen dem Pyridon-Grundger{\"u}st und der elektrophilen Gruppe sowie die {\"u}ber den Ether verkn{\"u}pften aromatischen Ringsysteme variiert. Diese Verbindungen wurden hinsichtlich ihrer inhibitorischen Aktivit{\"a}t am jeweiligen Enzym getestet. Anschließend wurde von Verbindung 32 und 33, die jeweils eine gute Inhibition des Enzyms aufweisen, der IC50-Wert gemessen. Beide Verbindungen weisen eine 50-prozentige Reduktion der Enzymaktivit{\"a}t im mittleren nanomolaren Bereich auf. Zus{\"a}tzlich wurde Verbindung 32 in einem sogenannten „jump-dilution"-Assay auf kovalente Inhibition getestet. Durch dieses Experiment konnte eine kovalente Inhibition des Enzyms ausgeschlossen werden. Die Reaktivit{\"a}t der eingesetzten „warheads" wurde gegen{\"u}ber einem Tripeptid mittels eines LC/MS-Iontrap-Systems bestimmt. Die untersuchten Verbindungen zeigten keine signifikante Reaktion mit der im Tripeptid eingebauten nukleophilen Aminos{\"a}ure Tyrosin, deren Nukleophilie bei dem pH-Wert des Tests (pH = 8.2 und 10.8) nicht hoch genug ist. Um einen Einblick in den Bindemodus der Verbindungen zu erhalten, wurden ferner Kristallisationsversuche durchgef{\"u}hrt. Die erhaltenen Kristallstrukturen zeigen, dass die Verbindungen mit dem gew{\"u}nschten Bindemodus am Zielenzym binden, aber eine kovalente Modifizierung des Tyrosins146 durch die eingesetzten „warheads" aufgrund der großen Entfernung (6 {\AA} zwischen elektrophiler Gruppe und Tyrosin146), unwahrscheinlich ist. Zus{\"a}tzlich wurden die physikochemischen Eigenschaften (Stabilit{\"a}t, Wasserl{\"o}slichkeit und logP) der Verbindung 32 sowie Verbindung 33 charakterisiert. M. tuberculosis ist der Erreger der global verbreiteten Infektionskrankheit Tuberkulose (TB), die zu den zehn h{\"a}ufigsten Todesursachen weltweit geh{\"o}rt. Das Bakterium kann das im menschlichen K{\"o}rper vorkommende Cholesterol metabolisieren und nutzt dessen Abbauprodukte als wichtige Kohlenstoffquelle. Die Thiolase FadA5 ist bei diesem Abbau ein wichtiges Enzym und konnte als potenzielles innovatives Target f{\"u}r neue Antibiotika definiert werden. Durch Dockingstudien konnten zwei potenzielle Leitstrukturen als Inhibitoren der Thiolase FadA5 identifiziert werden. Im Rahmen dieser Arbeit wurden die vorgeschlagenen Strukturen mit dem gew{\"u}nschten „warhead" synthetisiert und hinsichtlich ihrer inhibitorischen Aktivit{\"a}t gegen{\"u}ber dem Enzym untersucht. Die Zielverbindungen zeigen keine signifikante Hemmung sowie kovalente Bindung {\"u}ber die eingesetzten „warheads" an die Thiolase FadA5.},
  subject      = {Enoyl-acyl-carrier-protein-Reductase<Enoyl-[acyl-carrier-protein]-Reductase>},
  language  = {de}
}
@phdthesis{Volpato2021,
  author    = {Volpato, Daniela},
  title     = {Bitopic Ligands and their molecular fragments for the study of the M1 Muscarinic Receptor},
  doi       = {10.25972/OPUS-24881},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-248815},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {The past decades have witnessed the development of new pharmaceutical compounds that modulate receptor function by targeting allosteric sites. Allosteric sites are, by definition, domains topographically distinct from the orthosteric binding pocket where the natural ligand binds. Exploring the possibilities of linking orthosteric and allosteric pharmacophores in one compound to yield 'bitopic' compounds is a strategy derived from the "message-address" concept by Schwyzer , first applied to GPCRs by Portoghese et al. This concept explicitly underlines the orthosteric/allosteric combination, in opposite to the more general umbrella term bivalent. The broad possibilities of bitopic ligands in the pharmaceutical field are under continuous study. Bitopic compounds are promising pharmaceutical tools for taking advantage of the allosteric binding to achieve subtype selectivity while preserving high affinity at the receptor. The development of bitopic ligands, based on the idea of combining high affinity (via orthosteric sites) with high selectivity (via allosteric sites), have led to the development of highly selective bivalent ligands for GPCRs , such as for the opioid receptors , muscarinic acetylcholine receptors (mAChRs), serotonin receptors, cannabinoid receptors, and gonadotropin-releasing hormone receptors. This concept has even been extended to other receptors, for examples nicotinic receptors and other proteins, such as acetylcholinesterases and the tyrosine kinase receptors TrkA and TrkC. The reasons to pursue a bitopic ligand approach are various. An improved affinity for the target GPCR and/or an improved selectivity either at the level of receptor subtype, or at the level of signaling pathway. Another advantage of bitopic ligands over purely allosteric ligands is that the former rely on the appropriate presence of endogenous agonist tone to mediate their effects, whereas a bitopic ligand would engage the orthosteric site irrespective of the presence or absence of endogenous tone. By way of introduction to the hybrid approach, a review of the concept of hybrids compounds targeting the cholinergic system is presented in section A of this thesis. Recent updates in hybrid molecule design as a strategy for selectively addressing multiple target proteins involved in Alzheimer's disease (AD) is here reported . This represents the potential and the growing interest in hybrid compound as pharmacological tools to achieve receptor subtype selectivity and/or, to study the overall functional activity of the receptor. Until now, muscarinic acetylcholine receptors (mAChRs) have proved to be a particularly fruitful receptor model for the development and characterization of bitopic ligands. In this thesis, several examples of new muscarinic bitopic approach are reported in the results section. A study of bipharmacophoric ligands composed of the muscarinic positive allosteric modulators (BQCAderived compounds) linked with chain of various lengths to different orthosteric building blocks is reported in the result part 1. Synthesis and examination of the potential pharmacological characteristic of Oxotremorine-BQCAd compounds and Xanomeline-BQCAd hybrid derivatives are described in results parts 2 and 4, respectively. Moreover, the bitopic concept has even been extended to other proteins, such as acetylcholinesterase. In the result part 5 an overview of the new Tacrine-Xanomeline hybrids aiming to improve the inhibitory potency of the acetylcholinesterase and simultaneously to increase the cholinergic tone, via the xanomelinic portion acting on the M1 receptor is given. A new trivalent approach is presented for the first time to deepen the study of the M1 muscarinic receptor in the result part 6. Moreover, the synthesis of a new series of iperoxo-derived alkane, bis(ammonio)alkane-type and rigidified chain ligands is given in the result part 7 together with some prospects for further research.},
  subject      = {Ligand <Biochemie>},
  language  = {en}
}
@article{SeitzerKlapperMazigoetal.2021,
  author    = {Seitzer, Moritz and Klapper, Sylvia and Mazigo, Humphrey D. and Holzgrabe, Ulrike and Mueller, Andreas},
  title     = {Quality and composition of Albendazole, Mebendazole and Praziquantel available in Burkina Faso, C{\^o}te d'Ivoire, Ghana and Tanzania},
  series = {PLoS Neglected Tropical Diseases},
  volume    = {15},
  journal   = {PLoS Neglected Tropical Diseases},
  number    = {1},
  doi       = {10.1371/journal.pntd.0009038},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-270434},
  year      = {2021},
  abstract  = {Background Even though the international combat against Neglected Tropical Diseases such as schistosomiasis or soil-transmitted helminthiases depends on reliable therapeutics, anthelminthic pharmacovigilance has been neglected on many national African drug markets. Therefore, quality and composition of Albendazole, Mebendazole and Praziquantel locally collected in Burkina Faso, C{\^o}te d'Ivoire, Ghana and Tanzania were analysed. Methods Samples of 88 different batches were obtained from randomly selected facilities. Sampling took place in Northwest Tanzania, Western Burkina Faso, Southeast C{\^o}te d'Ivoire and Southwest Ghana. Visual examination of both packaging and samples was performed according to the WHO 'Be Aware' tool. Products were then screened with the GPHF Minilab, consisting of tests of mass uniformity, disintegration times and thin-layer chromatography (TLC). Confirmatory tests were performed according to international pharmacopoeiae, applying assays for dissolution profiles and high-performance liquid chromatography (HPLC). Findings Despite minor irregularities, appearance of the products did not hint at falsified medicines. However, 19.6\% of the brands collected in Ghana and Tanzania were not officially licensed for sale. Mass uniformity was confirmed in 53 out of 58 brands of tablets. 41 out of 56 products passed disintegration times; 10 out of the 15 failing products did not disintegrate at all. Evaluating TLC results, only 4 out of 83 batches narrowly missed specification limits, 18 batches slightly exceeded them. Not more than 46.3\% (31 / 67) of the tablets assayed passed the respective pharmaceutical criteria for dissolution. HPLC findings confirmed TLC results despite shifted specification limits: 10 out of 83 tested batches contained less than 90\%, none exceeded 110\%. Conclusion In the four study countries, no falsified anthelminthic medicine was encountered. The active pharmaceutical ingredient was not found to either exceed or fall below specification limits. Galenic characteristics however, especially dissolution profiles, revealed great deficits.},
  language  = {en}
}
@phdthesis{Volpp2021,
  author    = {Volpp, Miriam},
  title     = {Bestimmung der Plasmaproteinbindung von niedrig affinen Liganden am Beispiel der Ephedra-Alkaloide},
  doi       = {10.25972/OPUS-21961},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-219619},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Zur Bestimmung der Bindungsaffinit{\"a}t von Liganden zu den Plasmaproteinen, insbesondere Albumin, wurden {\"u}ber die Jahre zahlreiche Methoden entwickelt. Die Grundlage dieser Arbeit war die Bestimmung der Plasmaproteinbindung der Ephedra-Alkaloide unter Verwendung einzelner dieser etablierten Methoden. Aufgrund ihres Anwendungsgebiets als Notfallmedikation bei An{\"a}sthesie-bedingter Hypotonie und den damit verbundenen Anforderungen an die Pharmakokinetik, sollten die Ephedra-Alkaloide niedrig-affine Liganden der Plasmaproteine darstellen. In der Literatur und in vorhergehenden Arbeiten wurden f{\"u}r die Ephedra-Alkaloide jedoch sehr unterschiedliche, teilweise der Indikation widersprechende Affinit{\"a}ten bestimmt. Daher sollte im Rahmen dieser Arbeit das Ausmaß der Plasmaproteinbindung der Ephedra-Alkaloide weiter untersucht und die Affinit{\"a}t zu Albumin bzw. anderen Plasmaproteinen im humanen Serum bestimmt werden. Neben der Affinit{\"a}t sollte auch die Stereoselektivit{\"a}t der Bindung genauer betrachtet werden, die bei der Bindung vieler Wirkstoffe eine Rolle spielt. Als Referenzmethode diente die kontinuierliche Ultrafiltration, die auch schon bei H{\"o}rst verwendet wurde. Folgende Schlussfolgerungen konnten aus den Ergebnissen dieser Arbeit gezogen werden: 1) Die Ergebnisse der kontinuierlichen Ultrafiltration zeigten, dass die Ephedra-Alkaloide, Ephedrin und Pseudoephedrin, ein nur geringes Ausmaß an Plasmaprotein-bindung von 4 - 9 \% gegen{\"u}ber bovinem und humanem Serumalbumin zeigen. Eine deutlich h{\"o}here Plasmaproteinbindung von 19 - 37 \% konnte hingegen bei der Verwendung von humanem Serum bestimmt werden. Die Affinit{\"a}t von Pseudoephedrin war dabei jeweils geringer als die von Ephedrin. 2) Diese Ergebnisse mit humanem Serum und die Tatsache, dass Albumin vorwiegend saure Stoffe bindet, legen nahe, dass die Ephedra-Alkaloide vermehrt an andere Plasmaproteine in Serum binden. Erste Messergebnisse mit saurem α1 Glykoprotein best{\"a}tigen diese Vermutung. 3) Eine Stereoselektivit{\"a}t konnte nur in geringem Maß bei (+) Ephedrin beobachtet werden, wobei der Unterschied nur im Serum signifikant ist. Pseudoephedrin dagegen zeigte keinerlei Stereoselektivit{\"a}t. Diese Beobachtung passt zu den Schlussfolgerungen der Pfeiffer'schen Regel zur Stereoselektivit{\"a}t einer Bindung. 4) Andere Sympathomimetika mit einer zus{\"a}tzlichen Phenolgruppe im Molek{\"u}l zeigen eine {\"a}hnlich niedrige Affinit{\"a}t zu Albumin von ca. 10 \%. Eine zus{\"a}tzliche Phenolgruppe scheint die sauren Eigenschaften des Liganden nicht ausreichend zu erh{\"o}hen, um die Affinit{\"a}t zu Albumin signifikant zu steigern. 5) Das terti{\"a}re Kohlenstoffatom am Stickstoff des Ephedrins scheint in gewisser Weise an der Bindung zu Albumin beteiligt zu sein. Sympathomimetika mit einer zus{\"a}tzlichen Methylgruppe an diesem Kohlenstoffatom, wie Ephedrin, Pseudoephedrin und Oxilofrin, zeigen eine gr{\"o}ßere Streuung der Messergebnisse. Eine zus{\"a}tzliche Methylgruppe in dieser Position scheint die Bindung daher sterisch zu hindern. 6) Die Ergebnisse der diskontinuierlichen Ultrafiltration best{\"a}tigen weitestgehend die Ergebnisse der kontinuierlichen Ultrafiltration 7) Eine Bestimmung des Ausmaßes der Plasmaproteinbindung von niedrig-affinen Stoffen ist mit den anderen orthogonalen Methoden ACE, NMR und iTC nicht m{\"o}glich. Diese drei verwendeten Methoden trennen nicht wie die klassischen Methoden den gebundenen vom ungebundenen Wirkstoff, sondern beruhen auf einer Ver{\"a}nderung bestimmter Messparameter: bei der ACE die Migrationszeit, bei der NMR-Spektroskopie die chemische Verschiebung der Signale bzw. der Diffusionskoeffizient und bei der iTC die frei werdende Bindungsw{\"a}rme. Bei allen drei Methoden war die {\"A}nderung der Messgr{\"o}ße aufgrund der niedrigen Plasmaproteinbindung zu gering, um auswertbar zu sein. 8) Eine St{\"o}rgr{\"o}ße bei die orthogonalen Methoden war vielfach auch das Albumin selbst bzw. dessen Eigenschaften. Bei der Affinit{\"a}ts-Kapillarelektrophorese sind physiologische HSA-Konzentrationen wegen des starken Basislinienrauschens nicht messbar. Zudem bewirkt der Albuminzusatz im Trennpuffer eine Viskosit{\"a}ts{\"a}nderung, die den EOF verlangsamt und so die Messung st{\"o}rt. Bei der NMR-Spektroskopie k{\"o}nnen wegen der {\"U}berlagerung der Signale durch die breiten Albuminbanden weder Ver{\"a}nderungen in der chemischen Verschiebung noch des Diffusionskoeffizienten zuverl{\"a}ssig bestimmt werden. In der iTC erschwerte die Schaumbildung der L{\"o}sung, die durch die Oberfl{\"a}chenaktivit{\"a}t des Albumins verursacht wird, die Messung. In dieser Arbeit konnte somit das Ausmaß der Plasmaproteinbindung der Ephedra-Alkaloide mit verschiedenen Methoden erfolgreich bestimmt werden. Damit best{\"a}tigte diese Arbeit, dass die Ephedra-Alkaloide, wie deren Indikation vermuten l{\"a}sst, zu den niedrig affinen Liganden des Albumins z{\"a}hlen. Um genauer eingrenzen zu k{\"o}nnen durch welche Plasmaproteine im Blutserum die Ephedra-Alkaloide transportiert werden, sollten die Untersuchungen zum sauren α1-Glykoprotein fortgesetzt und gegebenenfalls durch weitere Bestimmungen mit anderen Plasmaproteinen erg{\"a}nzt werden. Die Ergebnisse dieser Arbeit haben auch gezeigt, dass viele der unz{\"a}hligen Methoden zur Untersuchung der Plasmaproteinbindung bei der Bestimmung von niedrig affinen Liganden ihre Grenzen haben. Nach wie vor sind zur Bestimmung einer niedrigen Bindungsaffinit{\"a}t weiterhin die klassischen Methoden, wie die kontinuierliche Ultrafiltration, Mittel der Wahl. Nicht zuletzt deshalb erfreuen sich diese Methoden auch heute noch großer Beliebtheit.},
  subject      = {Proteinbindung},
  language  = {de}
}
@article{GentzschChenSpatzetal.2021,
  author    = {Gentzsch, Christian and Chen, Xinyu and Spatz, Philipp and Košak, Urban and Knez, Damijan and Nose, Naoko and Gobec, Stanislav and Higuchi, Takahiro and Decker, Michael},
  title     = {Synthesis and Initial Characterization of a Reversible, Selective \(^{18}\)F-Labeled Radiotracer for Human Butyrylcholinesterase},
  series = {Molecular Imaging and Biology},
  volume    = {23},
  journal   = {Molecular Imaging and Biology},
  number    = {4},
  issn      = {1860-2002},
  doi       = {10.1007/s11307-021-01584-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-269870},
  pages     = {505-515},
  year      = {2021},
  abstract  = {Purpose A neuropathological hallmark of Alzheimer's disease (AD) is the presence of amyloid-β (Aβ) plaques in the brain, which are observed in a significant number of cognitively normal, older adults as well. In AD, butyrylcholinesterase (BChE) becomes associated with A\(_{β}\) aggregates, making it a promising target for imaging probes to support diagnosis of AD. In this study, we present the synthesis, radiochemistry, in vitro and preliminary ex and in vivo investigations of a selective, reversible BChE inhibitor as PET-tracer for evaluation as an AD diagnostic. Procedures Radiolabeling of the inhibitor was achieved by fluorination of a respective tosylated precursor using K[\(^{18}\)F]. IC\(_{50}\) values of the fluorinated compound were obtained in a colorimetric assay using recombinant, human (h) BChE. Dissociation constants were determined by measuring hBChE activity in the presence of different concentrations of inhibitor. Results Radiofluorination of the tosylate precursor gave the desired radiotracer in an average radiochemical yield of 20 ± 3 \%. Identity and > 95.5 \% radiochemical purity were confirmed by HPLC and TLC autoradiography. The inhibitory potency determined in Ellman's assay gave an IC\(_{50}\) value of 118.3 ± 19.6 nM. Dissociation constants measured in kinetic experiments revealed lower affinity of the inhibitor for binding to the acylated enzyme (K2 = 68.0 nM) in comparison to the free enzyme (K\(_{1}\) = 32.9 nM). Conclusions The reversibly acting, selective radiotracer is synthetically easily accessible and retains promising activity and binding potential on hBChE. Radiosynthesis with \(^{18}\)F labeling of tosylates was feasible in a reasonable time frame and good radiochemical yield.},
  language  = {en}
}
@article{ScheinerSinkSpatzetal.2021,
  author    = {Scheiner, Matthias and Sink, Alexandra and Spatz, Philipp and Endres, Erik and Decker, Michael},
  title     = {Photopharmacology on Acetylcholinesterase: Novel Photoswitchable Inhibitors with Improved Pharmacological Profiles},
  series = {ChemPhotoChem},
  volume    = {5},
  journal   = {ChemPhotoChem},
  number    = {2},
  doi       = {10.1002/cptc.202000119},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-218445},
  pages     = {149 -- 159},
  year      = {2021},
  abstract  = {Considerable effort has previously been invested in a light-controlled inhibition of the enzyme acetylcholinesterase (AChE). We found that a novel azobenzene-based bistacrine AChE inhibitor switched faster than the known dithienylethene based bistacrine and inverted the photo-controlled interactions of the photoisomers compared to its dithienylethene congener. Furthermore, we have optimized a previously described light-controlled tacrine-based AChE inhibitor. Isomerization upon irradiation with UV light of the novel inhibitor was observed in aqueous medium and showed no fatigue over several cycles. The cis-enriched form showed an 8.4-fold higher inhibition of hAChE compared with its trans-enriched form and was about 30-fold more active than the reference compound tacrine with a single-digit nanomolar inhibition. We went beyond proof-of-concept to discover photoswitchable AChE inhibitors with pharmacologically desirable nanomolar inhibition, "cis-on" effect, and pronounces differences between the photoisomers.},
  language  = {en}
}
@article{GentzschHoffmannOhshimaetal.2021,
  author    = {Gentzsch, Christian and Hoffmann, Matthias and Ohshima, Yasuhiro and Nose, Naoko and Chen, Xinyu and Higuchi, Takahiro and Decker, Michael},
  title     = {Synthesis and Initial Characterization of a Selective, Pseudo-irreversible Inhibitor of Human Butyrylcholinesterase as PET Tracer},
  series = {ChemMedChem},
  volume    = {16},
  journal   = {ChemMedChem},
  number    = {9},
  doi       = {10.1002/cmdc.202000942},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-239904},
  pages     = {1427 -- 1437},
  year      = {2021},
  abstract  = {The enzyme butyrylcholinesterase (BChE) represents a promising target for imaging probes to potentially enable early diagnosis of neurodegenerative diseases like Alzheimer's disease (AD) and to monitor disease progression in some forms of cancer. In this study, we present the design, facile synthesis, in vitro and preliminary ex vivo and in vivo evaluation of a morpholine-based, selective inhibitor of human BChE as a positron emission tomography (PET) tracer with a pseudo-irreversible binding mode. We demonstrate a novel protecting group strategy for 18F radiolabeling of carbamate precursors and show that the inhibitory potency as well as kinetic properties of our unlabeled reference compound were retained in comparison to the parent compound. In particular, the prolonged duration of enzyme inhibition of such a morpholinocarbamate motivated us to design a PET tracer, possibly enabling a precise mapping of BChE distribution.},
  language  = {en}
}
@article{KadeTandonWeichholdetal.2021,
  author    = {Kade, Juliane C. and Tandon, Biranche and Weichhold, Jan and Pisignano, Dario and Persano, Luana and Luxenhofer, Robert and Dalton, Paul D.},
  title     = {Melt electrowriting of poly(vinylidene fluoride-co-trifluoroethylene)},
  series = {Polymer International},
  volume    = {70},
  journal   = {Polymer International},
  number    = {12},
  doi       = {10.1002/pi.6272},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257654},
  pages     = {1725-1732},
  year      = {2021},
  abstract  = {Poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-co-TrFE)) is an electroactive polymer with growing interest for applications in biomedical materials and flexible electronics. In this study, a solvent-free additive manufacturing technique called melt electrowriting (MEW) has been utilized to fabricate well-defined microperiodic structures of the copolymer (P(VDF-co-TrFE)). MEW of the highly viscous polymer melt was initiated using a heated collector at temperatures above 120 °C and required remarkably slow collector speeds below 100 mm min\(^{-1}\). The fiber surface morphology was affected by the collector speed and an increase in β-phase was observed for scaffolds compared to the unprocessed powder. Videography shows vibrations of the P(VDF-co-TrFE) jet previously unseen during MEW, probably due to repeated charge buildup and discharge. Furthermore, piezo-force microscopy measurements demonstrated the electromechanical response of MEW-fabricated fibers. This research therefore achieves the melt electrohydrodynamic processing of fibers with micrometer resolution into defined structures with an important electroactive polymer.},
  language  = {en}
}
@article{GernerScherfClavel2021,
  author    = {Gerner, Bettina and Scherf-Clavel, Oliver},
  title     = {Physiologically based pharmacokinetic modelling of Cabozantinib to simulate enterohepatic recirculation, drug-drug interaction with Rifampin and liver impairment},
  series = {Pharmaceutics},
  volume    = {13},
  journal   = {Pharmaceutics},
  number    = {6},
  issn      = {1999-4923},
  doi       = {10.3390/pharmaceutics13060778},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-239661},
  year      = {2021},
  abstract  = {Cabozantinib (CAB) is a receptor tyrosine kinase inhibitor approved for the treatment of several cancer types. Enterohepatic recirculation (EHC) of the substance is assumed but has not been further investigated yet. CAB is mainly metabolized via CYP3A4 and is susceptible for drug-drug interactions (DDI). The goal of this work was to develop a physiologically based pharmacokinetic (PBPK) model to investigate EHC, to simulate DDI with Rifampin and to simulate subjects with hepatic impairment. The model was established using PK-Sim® and six human clinical studies. The inclusion of an EHC process into the model led to the most accurate description of the pharmacokinetic behavior of CAB. The model was able to predict plasma concentrations with low bias and good precision. Ninety-seven percent of all simulated plasma concentrations fell within 2-fold of the corresponding concentration observed. Maximum plasma concentration (C\(_{max}\)) and area under the curve (AUC) were predicted correctly (predicted/observed ratio of 0.9-1.2 for AUC and 0.8-1.1 for C\(_{max}\)). DDI with Rifampin led to a reduction in predicted AUC by 77\%. Several physiological parameters were adapted to simulate hepatic impairment correctly. This is the first CAB model used to simulate DDI with Rifampin and hepatic impairment including EHC, which can serve as a starting point for further simulations with regard to special populations.},
  language  = {en}
}
@article{WohlfartHolzgrabe2021,
  author    = {Wohlfart, Jonas and Holzgrabe, Ulrike},
  title     = {Analysis of histamine and sisomicin in gentamicin: search for the causative agents of adverse effects},
  series = {Archiv der Pharmazie},
  volume    = {354},
  journal   = {Archiv der Pharmazie},
  number    = {12},
  doi       = {10.1002/ardp.202100260},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256596},
  year      = {2021},
  abstract  = {In 1998, the aminoglycoside antibiotic gentamicin sulfate caused several cases of deaths in the United States, after the switch from twice- to once-daily application. Endotoxins were discussed as the cause for the adverse effects and sisomicin was identified as the lead impurity; batches containing sisomicin were contaminated with more impurities and were responsible for the fatalities. In 2016, anaphylactic reactions in horses, and later in humans with one fatality, were observed after application of gentamicin sulfate contaminated with histamine. To determine whether histamine was responsible for the 1990s death cases as well, histamine was quantified by means of liquid chromatography-tandem mass spectrometry (LC-MS/MS) in 30 samples of gentamicin sulfate analyzed in previous studies. Furthermore, a relative quantification of sisomicin was performed to check for a correlation between histamine and the lead impurity. A maximum amount of 11.52 ppm histamine was detected, which is below the limit for anaphylactic reactions of 16 ppm, and no correlation of the two impurities was observed. However, the European Medicines Agency recommends a stricter limit with regard to the maximum single dose of gentamicin sulfate to reach a greater gap between the maximum histamine exposition of 4.3 µg and the quantity known to cause hypotension of 7 µg. The low amounts of histamine and the fact that there is no connection with the contamination with sisomicin showed that histamine was not the cause for the death cases in the United States in 1998, and endotoxins remain the most probable explanation.},
  language  = {en}
}
@article{UrlaubKaiserScherf‐Claveletal.2021,
  author    = {Urlaub, Jonas and Kaiser, Reinhard P. and Scherf-Clavel, Oliver and Bolm, Carsten and Holzgrabe, Ulrike},
  title     = {Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis},
  series = {Electrophoresis},
  volume    = {42},
  journal   = {Electrophoresis},
  number    = {17-18},
  doi       = {10.1002/elps.202000307},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-225852},
  pages     = {1790 -- 1799},
  year      = {2021},
  abstract  = {Besides the racemate, the S-enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S-Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg\(^{2+}\), Ca\(^{2+}\), or Zn\(^{2+}\) ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused-silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM magnesium acetate tetrahydrate, and 35 mM heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) as chiral selector. The quantification of R-Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68-5.49\% R-Ibu (R\(^{2}\) = 0.999), recovery was found to range between 97 and 103\%, the RSD of intra- and interday precision below 2.5\%, and the limit of quantification for R- in S-Ibu was calculated to be 0.21\% (extrapolated) and 0.15\% (dilution of racemic ibuprofen), respectively. Isomerization of S-Ibu was observed under basic conditions by applying long milling times and high milling frequencies.},
  language  = {en}
}
@article{BechtSchollmayerMonakhovaetal.2021,
  author    = {Becht, Alexander and Schollmayer, Curd and Monakhova, Yulia and Holzgrabe, Ulrike},
  title     = {Tracing the origin of paracetamol tablets by near-infrared, mid-infrared, and nuclear magnetic resonance spectroscopy using principal component analysis and linear discriminant analysis},
  series = {Analytical and Bioanalytical Chemistry},
  volume    = {413},
  journal   = {Analytical and Bioanalytical Chemistry},
  number    = {11},
  doi       = {10.1007/s00216-021-03249-z},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-265400},
  pages     = {3107-3118},
  year      = {2021},
  abstract  = {Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6\%/99.6\% and 98.7/100\% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.},
  language  = {en}
}
@article{SchraderRieseKurlbaumetal.2021,
  author    = {Schrader, Nikolas and Riese, Thorsten and Kurlbaum, Max and Meybohm, Patrick and Kredel, Markus and Surat, G{\"u}zin and Scherf-Clavel, Oliver and Strate, Alexander and Pospiech, Andreas and Hoppe, Kerstin},
  title     = {Personalized antibiotic therapy for the critically ill: Implementation strategies and effects on clinical outcome of piperacillin therapeutic drug monitoring — a descriptive retrospective analysis},
  series = {Antibiotics},
  volume    = {10},
  journal   = {Antibiotics},
  number    = {12},
  issn      = {2079-6382},
  doi       = {10.3390/antibiotics10121452},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-250052},
  year      = {2021},
  abstract  = {Therapeutic drug monitoring (TDM) is increasingly relevant for an individualized antibiotic therapy and subsequently a necessary tool to reduce multidrug-resistant pathogens, especially in light of diminishing antimicrobial capabilities. Critical illness is associated with profound pharmacokinetic and pharmacodynamic alterations, which challenge dose finding and the application of particularly hydrophilic drugs such as β-lactam antibiotics. Methods: Implementation strategy, potential benefit, and practicability of the developed standard operating procedures were retrospectively analyzed from January to December 2020. Furthermore, the efficacy of the proposed dosing target of piperacillin in critically ill patients was evaluated. Results: In total, 160 patients received piperacillin/tazobactam therapy and were subsequently included in the study. Of them, 114 patients received piperacillin/tazobactam by continuous infusion and had at least one measurement of piperacillin serum level according to the standard operating procedure. In total, 271 measurements were performed with an average level of 79.0 ± 46.0 mg/L. Seventy-one piperacillin levels exceeded 100 mg/L and six levels were lower than 22.5 mg/L. The high-level and the low-level group differed significantly in infection laboratory parameters (CRP (mg/dL) 20.18 ± 11.71 vs. 5.75 ± 5.33) and renal function [glomerular filtration rate (mL/min/1.75 m2) 40.85 ± 26.74 vs. 120.50 ± 70.48]. Conclusions: Piperacillin levels are unpredictable in critically ill patients. TDM during piperacillin/tazobactam therapy is highly recommended for all patients. Although our implementation strategy was effective, further strategies implemented into the daily clinical workflow might support the health care staff and increase the clinicians' alertness.},
  language  = {en}
}