@phdthesis{Lorenzin2016,
  author    = {Lorenzin, Francesca},
  title     = {Regulation of transcription by MYC - DNA binding and target genes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-150766},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {MYC is a transcription factor, whose expression is elevated or deregulated in many human cancers (up to 70\%) and is often associated with aggressive and poorly differentiated tumors. Although MYC is extensively studied, discrepancies have emerged about how this transcription factor works. In primary lymphocytes, MYC promotes transcriptional amplification of virtually all genes with an open promoter, whereas in tumor cells MYC regulates specific sets of genes that have significant prognostic value. Furthermore, the set of target genes that distinguish MYC's physiological function from the pathological/oncogenic one, whether it exists or not, has not been fully understood yet. In this study, it could be shown that MYC protein levels within a cell and promoter affinity (determined by E-box presence or interaction with other proteins) of target genes toward MYC are important factors that influence MYC activity. At low levels, MYC can amplify a certain transcriptional program, which includes high affinity binding sites, whereas at high levels MYC leads to the specific up- and down regulation of genes with low affinity. Moreover, the promoter affinity characterizes different sets of target genes which can be distinguished in the physiological or oncogenic MYC signatures. MYC-mediated repression requires higher MYC levels than activation and formation of a complex with MIZ1 is necessary for inhibiting expression of a subset of MYC target genes.},
  subject      = {MYC},
  language  = {en}
}
@phdthesis{Forster2016,
  author    = {Forster, Johannes},
  title     = {Variational Approach to the Modeling and Analysis of Magnetoelastic Materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-147226},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {This doctoral thesis is concerned with the mathematical modeling of magnetoelastic materials and the analysis of PDE systems describing these materials and obtained from a variational approach. The purpose is to capture the behavior of elastic particles that are not only magnetic but exhibit a magnetic domain structure which is well described by the micromagnetic energy and the Landau-Lifshitz-Gilbert equation of the magnetization. The equation of motion for the material's velocity is derived in a continuum mechanical setting from an energy ansatz. In the modeling process, the focus is on the interplay between Lagrangian and Eulerian coordinate systems to combine elasticity and magnetism in one model without the assumption of small deformations. The resulting general PDE system is simplified using special assumptions. Existence of weak solutions is proved for two variants of the PDE system, one including gradient flow dynamics on the magnetization, and the other featuring the Landau-Lifshitz-Gilbert equation. The proof is based on a Galerkin method and a fixed point argument. The analysis of the PDE system with the Landau-Lifshitz-Gilbert equation uses a more involved approach to obtain weak solutions based on G. Carbou and P. Fabrie 2001.},
  subject      = {Magnetoelastizit{\"a}t},
  language  = {en}
}
@phdthesis{Koch2016,
  author    = {Koch, Julia Diana},
  title     = {Value Ranges for Schlicht Functions},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144978},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {This thesis deals with value sets, i.e. the question of what the set of values that a set of functions can take in a prescribed point looks like. Interest in such problems has been around for a long time; a first answer was given by the Schwarz lemma in the 19th century, and soon various refinements were proven. Since the 1930s, a powerful method for solving such problems has been developed, namely Loewner theory. We make extensive use of this tool, as well as variation methods which go back to Schiffer to examine the following questions: We describe the set of values a schlicht normalised function on the unit disc with prescribed derivative at the origin can take by applying Pontryagin's maximum principle to the radial Loewner equation. We then determine the value ranges for the set of holomorphic, normalised, and bounded functions that have only real coefficients in their power series expansion around 0, and for the smaller set of functions which are additionally typically real. Furthermore, we describe the values a univalent self-mapping of the upper half-plane with hydrodynamical normalization which is symmetric with respect to the imaginary axis can take. Lastly, we give a necessary condition for a schlicht bounded function f on the unit disc to have extremal derivative in a point z where its value f(z) is fixed by using variation methods.},
  subject      = {Pontrjagin-Maximumprinzip},
  language  = {en}
}
@phdthesis{Jung2016,
  author    = {Jung, Lisa Anna},
  title     = {Targeting MYC Function as a Strategy for Tumor Therapy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146993},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {A large fraction of human tumors exhibits aberrant expression of the oncoprotein MYC. As a transcription factor regulating various cellular processes, MYC is also crucially involved in normal development. Direct targeting of MYC has been a major challenge for molecular cancer drug discovery. The proof of principle that its inhibition is nevertheless feasible came from in vivo studies using a dominant-negative allele of MYC termed OmoMYC. Systemic expression of OmoMYC triggered long-term tumor regression with mild and fully reversible side effects on normal tissues. In this study, OmoMYC's mode of action was investigated combining methods of structural biology and functional genomics to elucidate how it is able to preferentially affect oncogenic functions of MYC. The crystal structure of the OmoMYC homodimer, both in the free and the E-box-bound state, was determined, which revealed that OmoMYC forms a stable homodimer, and as such, recognizes DNA via the same base-specific DNA contacts as the MYC/MAX heterodimer. OmoMYC binds DNA with an equally high affinity as MYC/MAX complexes. RNA-sequencing showed that OmoMYC blunts both MYC-dependent transcriptional activation and repression. Genome-wide DNA-binding studies using chromatin immunoprecipitation followed by high-throughput sequencing revealed that OmoMYC competes with MYC/MAX complexes on chromatin, thereby reducing their occupancy at consensus DNA binding sites. The most prominent decrease in MYC binding was seen at low-affinity promoters, which were invaded by MYC at oncogenic levels. Strikingly, gene set enrichment analyses using OmoMYC-regulated genes enabled the identification of tumor subgroups with high MYC levels in multiple tumor entities. Together with a targeted shRNA screen, this identified novel targets for the eradication of MYC-driven tumors, such as ATAD3A, BOP1, and ADRM1. In summary, the findings suggest that OmoMYC specifically inhibits tumor cell growth by attenuating the expression of rate-limiting proteins in cellular processes that respond to elevated levels of MYC protein using a DNA-competitive mechanism. This opens up novel strategies to target oncogenic MYC functions for tumor therapy.},
  subject      = {Myc},
  language  = {en}
}
@phdthesis{Ziegler2016,
  author    = {Ziegler, Christiane},
  title     = {Epigenetic Mechanisms in the Pathogenesis and Therapy of Anxiety Disorders},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146815},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Anxiety disorders (AD) are common, disabling mental disorders, which constitute the most prevalent mental health condition conveying a high individual and socioeconomic burden. Social anxiety disorder (SAD), i.e. fear in social situations particularly when subjectively scrutinized by others, is the second most common anxiety disorder with a life time prevalence of 10\%. Panic disorder (PD) has a life time prevalence of 2-5\% and is characterized by recurrent and abrupt surges of intense fear and anticipatory anxiety, i.e. panic attacks, occurring suddenly and unexpected without an apparent cue. In recent years, psychiatric research increasingly focused on epigenetic mechanisms such as DNA methylation as a possible solution for the problem of the so-called "hidden heritability", which conceptualizes the fact that the genetic risk variants identified so far only explain a small part of the estimated heritability of mental disorders. In the first part of this thesis, oxytocin receptor (OXTR) gene methylation was investigated regarding its role in the pathogenesis of social anxiety disorder. In summary, OXTR methylation patterns were implicated in different phenotypes of social anxiety disorder on a categorical, neuropsychological, neuroendocrinological as well as on a neural network level. The results point towards a multilevel role of OXTR gene hypomethylation particularly at one CpG site (CpG3, Chr3: 8 809 437) within the protein coding region of the gene in SAD. The second part of the thesis investigated monoamine oxidase A (MAOA) gene methylation regarding its role in the pathogenesis of panic disorder as well as - applying a psychotherapy-epigenetic approach - its dynamic regulation during the course of cognitive behavioural therapy (CBT) in PD patients. First, MAOA hypomethylation was shown to be associated with panic disorder as well as with panic disorder severity. Second, in patients responding to treatment MAOA hypomethylation was shown to be reversible up to the level of methylation in healthy controls after the course of CBT. This increase in MAOA methylation along with successful psychotherapeutic treatment was furthermore shown to be associated with symptom improvement regarding agoraphobic avoidance in an independent replication sample of non-medicated patients with PD. Taken together, in the future the presently identified epigenetic patterns might contribute to establishing targeted preventive interventions and personalized treatment options for social anxiety disorder or panic disorder, respectively.},
  subject      = {Angst},
  language  = {en}
}
@phdthesis{Ruf2016,
  author    = {Ruf, Franziska},
  title     = {The circadian regulation of eclosion in \(Drosophila\) \(melanogaster\)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146265},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Eclosion is the emergence of an adult insect from the pupal case at the end of development. In the fruit fly Drosophila melanogaster, eclosion is a circadian clock-gated event and is regulated by various peptides. When studied on the population level, eclosion reveals a clear rhythmicity with a peak at the beginning of the light-phase that persists also under constant conditions. It is a long standing hypothesis that eclosion gating to the morning hours with more humid conditions is an adaption to reduce water loss and increase the survival. Eclosion behavior, including the motor pattern required for the fly to hatch out of the puparium, is orchestrated by a well-characterized cascade of peptides. The main components are ecdysis-triggering hormone (ETH), eclosion hormone (EH) and crustacean cardioactive peptide (CCAP). The molt is initiated by a peak level and pupal ecdysis by a subsequent decline of the ecdysteroid ecdysone. Ecdysteroids are produced by the prothoracic gland (PG), an endocrine tissue that contains a peripheral clock and degenerates shortly after eclosion. Production and release of ecdysteroids are regulated by the prothoracicotropic hormone (PTTH). Although many aspects of the circadian clock and the peptidergic control of the eclosion behavior are known, it still remains unclear how both systems are interconnected. The aim of this dissertation research was to dissect this connection and evaluate the importance of different Zeitgebers on eclosion rhythmicity under natural conditions. Potential interactions between the central clock and the peptides regulating ecdysis motor behavior were evaluated by analyzing the influence of CCAP on eclosion rhythmicity. Ablation and silencing of CCAP neurons, as well as CCAP null-mutation did not affect eclosion rhythmicity under either light or temperature entrainment nor under natural conditions. To dissect the connection between the central and the peripheral clock, PTTH neurons were ablated. Monitoring eclosion under light and temperature entrainment revealed that eclosion became arrhythmic under constant conditions. However, qPCR expression analysis revealed no evidence for cycling of Ptth mRNA in pharate flies. To test for a connection with pigment-dispersing factor (PDF)-expressing neurons, the PDF receptor (PDFR) and short neuropeptide F receptor (sNPFR) were knocked down in the PTTH neurons. Knockdown of sNPFR, but not PDFR, resulted in arrhythmic eclosion under constant darkness conditions. PCR analysis of the PTTH receptor, Torso, revealed its expression in the PG and the gonads, but not in the brain or eyes, of pharate flies. Knockdown of torso in the PG lead to arrhythmicity under constant conditions, which provides strong evidence for the specific effect of PTTH on the PG. These results suggest connections from the PDF positive lateral neurons to the PTTH neurons via sNPF signaling, and to the PG via PTTH and Torso. This interaction presumably couples the period of the peripheral clock in the PG to that of the central clock in the brain. To identify a starting signal for eclosion and possible further candidates in the regulation of eclosion behavior, chemically defined peptidergic and aminergic neurons were optogenetically activated in pharate pupae via ChR2-XXL. This screen approach revealed two candidates for the regulation of eclosion behavior: Dromyosuppressin (DMS) and myo-inhibitory peptides (MIP). However, ablation of DMS neurons did not affect eclosion rhythmicity or success and the exact function of MIP must be evaluated in future studies. To assess the importance of the clock and of possible Zeitgebers in nature, eclosion of the wildtype Canton S and the clock mutant per01 and the PDF signaling mutants pdf01 and han5304 was monitored under natural conditions. For this purpose, the W{\"u}rzburg eclosion monitor (WEclMon) was developed, which is a new open monitoring system that allows direct exposure of pupae to the environment. A general decline of rhythmicity under natural conditions compared to laboratory conditions was observed in all tested strains. While the wildtype and the pdf01 and han5304 mutants stayed weakly rhythmic, the per01 mutant flies eclosed mostly arrhythmic. PDF and its receptor (PDFR encoded by han) are required for the synchronization of the clock network and functional loss can obviously be compensated by a persisting synchronization to external Zeitgebers. The loss of the central clock protein PER, however, lead to a non-functional clock and revealed the absolute importance of the clock for eclosion rhythmicity. To quantitatively analyze the effect of the clock and abiotic factors on eclosion rhythmicity, a statistical model was developed in cooperation with Oliver Mitesser and Thomas Hovestadt. The modelling results confirmed the clock as the most important factor for eclosion rhythmicity. Moreover, temperature was found to have the strongest effect on the actual shape of the daily emergence pattern, while light has only minor effects. Relative humidity could be excluded as Zeitgeber for eclosion and therefore was not further analyzed. Taken together, the present dissertation identified the so far unknown connection between the central and peripheral clock regulating eclosion. Furthermore, a new method for the analysis of eclosion rhythms under natural conditions was established and the necessity of a functional clock for rhythmic eclosion even in the presence of multiple Zeitgebers was shown.},
  subject      = {Taufliege},
  language  = {en}
}
@phdthesis{Schmitz2016,
  author    = {Schmitz, Tobias},
  title     = {Functional coatings by physical vapor deposition (PVD) for biomedical applications},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144825},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Metals are the most used materials for implant devices, especially in orthopedics, but despite their long history of application issues such as material failure through wear and corrosion remain unsolved leading to a certain number of revision surgeries. Apart from the problems associated with insufficient material properties, another serious issue is an implant associated infection due to the formation of a biofilm on the surface of the material after implantation. Thus, improvements in implant technology are demanded, especially since there is a projected rise of implants needed in the future. Surface modification methods such as physical vapour deposition (PVD), oxygen diffusion hardening and electrochemical anodization have shown to be efficient methods to improve the surfaces of metallic bulk materials regarding biomedical issues. This thesis was focused on the development of functional PVD coatings that are suitable for further treatment with surface modification techniques originally developed for bulk metals. The aim was to precisely adjust the surface properties of the implant according to the targeted application to prevent possible failure mechanisms such as coating delamination, wear or the occurrence of post-operative infections. Initially,  tantalum layers with approx 5 µm thickness were deposited at elevated substrate temperatures on cp Ti by RF magnetron sputtering. Due to the high affinity of tantalum to oxygen, these coatings are known to provide a self healing capacity since the rapid oxide formation is known to close surface cracks. Here, the work aimed to reduce the abrupt change of mechanical properties between the hard and brittle coating and the ductile substrate by creating an oxygen diffusion zone. It was found that the hardness and adhesion could be significantly increased when the coatings were treated afterwards by oxygen diffusion hardening in a two step process. Firstly, the surface was oxidized at a pressure of 6.7•10-3 mbar at 350 450 °C, followed by 1-2 h annealing in oxygen-free atmosphere at the same temperature leading to a diffusion of oxygen atoms into deeper parts of the substrate as proved by X-ray diffraction (XRD) analysis. The hereby caused mechanical stress in the crystal lattice led to an increase in Vickers hardness of the Ta layers from 570 HV to over 900 HV. Investigations into the adhesion of oxygen diffusion treated samples by Rockwell measurements demonstrated an increase of critical force for coating delamination from 12 N for untreated samples up to 25 N for diffusion treated samples. In a second approach, the development of modular targets aimed to produce functional coatings by metallic doping of titanium with biologically active agents. This was demonstrated by the fabrication of antimicrobial Ti(Ag) coatings using a single magnetron sputtering source equipped with a titanium target containing implemented silver modules under variation of bias voltage and substrate temperature. The deposition of both Ti and Ag was confirmed by X-ray diffraction and a clear correlation between the applied sputtering parameters and the silver content of the coatings was demonstrated by ICP-MS and EDX. Surface-sensitive XPS measurements revealed that higher substrate temperatures led to an accumulation of Ag in the near-surface region, while the application of a bias voltage had the opposite effect. SEM and AFM microscopy revealed that substrate heating during film deposition supported the formation of even and dense surface layers with small roughness values, which could even be enforced by applying a substrate bias voltage. Additional elution measurements using ICP-MS showed that the release kinetics depended on the amount of silver located at the film surface and hence could be tailored by variation of the sputter parameters. In a final step, the applied Ti and Ti(Ag) coatings deposited on cp Ti, stainless steel (316L) and glass substrates were subsequently nanostructured using a self-ordering process induced by electrochemical anodization in aqueous fluoride containing electrolytes. SEM analysis showed that nanotube arrays could be grown from the Ti and Ti(Ag) coatings deposited at elevated temperatures on any substrate, whereby no influence of the substrate on nanotube morphology could be observed. EDX measurements indicated that the anodization process led to the selective etching of Ti from Ti(Ag) coating. Further experiments on coatings deposited on glass surfaces revealed that moderate substrate temperatures during deposition resulting in smooth Ti layers as determined by AFM measurements, are favorable for the generation of highly ordered nanotube arrays. Such arrays exhibited superhydrophilic behavior as proved by contact angle measurements. XRD analysis revealed that the nanostructured coatings were amorphous after anodization but could be crystallized to anatase structure by thermal treatment at temperatures of 450°C.},
  subject      = {PVD-Verfahren},
  language  = {en}
}
@phdthesis{Cicova2016,
  author    = {Cicova, Zdenka},
  title     = {Characterization of a novel putative factor involved in host adaptation in Trypanosoma brucei},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142462},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Trypanosomes are masters of adaptation to different host environments during their complex life cycle. Large-scale proteomic approaches provide information on changes at the cellular level in a systematic way. However, a detailed work on single components is necessary to understand the adaptation mechanisms on a molecular level. Here we have performed a detailed characterization of a bloodstream form (BSF) stage-specific putative flagellar host adaptation factor (Tb927.11.2400) identified previously in a SILAC-based comparative proteome study. Tb927.11.2400 shares 38\% amino acid identity with TbFlabarin (Tb927.11.2410), a procyclic form (PCF) stage specific flagellar BAR domain protein. We named Tb927.11.2400 TbFlabarin like (TbFlabarinL) and demonstrate that it is a result of a gene duplication event, which occurred in African trypanosomes. TbFlabarinL is not essential for growth of the parasites under cell culture conditions and it is dispensable for developmental differentiation from BSF to the PCF in vitro. We generated a TbFlabarinL-specific antibody and showed that it localizes in the flagellum. The co-immunoprecipitation experiment together with a biochemical cell fractionation indicated a dual association of TbFlabarinL with the flagellar membrane and the components of the paraflagellar rod.},
  subject      = {Trypanosoma brucei},
  language  = {en}
}
@phdthesis{Kupper2016,
  author    = {Kupper, Maria},
  title     = {The immune transcriptome and proteome of the ant Camponotus floridanus and vertical transmission of its bacterial endosymbiont Blochmannia floridanus},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142534},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The evolutionary success of insects is believed to be at least partially facilitated by symbioses between insects and prokaryotes. Bacterial endosymbionts confer various fitness advantages to their hosts, for example by providing nutrients lacking from the insects' diet thereby enabling the inhabitation of new ecological niches. The Florida carpenter ant Camponotus floridanus harbours endosymbiotic bacteria of the genus Blochmannia. These primary endosymbionts mainly reside in the cytoplasm of bacteriocytes, specialised cells interspersed into the midgut tissue, but they were also found in oocytes which allows their vertical transmission. The social lifestyle of C. floridanus may facilitate the rapid spread of infections amongst genetically closely related animals living in huge colonies. Therefore, the ants require an immune system to efficiently combat infections while maintaining a "chronic" infection with their endosymbionts. In order to investigate the immune repertoire of the ants, the Illumina sequencing method was used. The previously published genome sequence of C. floridanus was functionally re-annotated and 0.53\% of C. floridanus proteins were assigned to the gene ontology (GO) term subcategory "immune system process". Based on homology analyses, genes encoding 510 proteins with possible immune function were identified. These genes are involved in microbial recognition and immune signalling pathways but also in cellular defence mechanisms, such as phagocytosis and melanisation. The components of the major signalling pathways appear to be highly conserved and the analysis revealed an overall broad immune repertoire of the ants though the number of identified genes encoding pattern recognition receptors (PRRs) and antimicrobial peptides (AMPs) is comparatively low. Besides three genes coding for homologs of thioester-containing proteins (TEPs), which have been shown to act as opsonins promoting phagocytosis in other insects, six genes encoding the AMPs defesin-1 and defensin-2, hymenoptaecin, two tachystatin-like peptides and one crustin-like peptide are present in the ant genome. Although the low number of known AMPs in comparison to 13 AMPs in the honey bee Apis mellifera and 46 AMPs in the wasp Nasonia vitripennis may indicate a less potent immune system, measures summarised as external or social immunity may enhance the immune repertoire of C. floridanus, as it was discussed for other social insects. Also, the hymenoptaecin multipeptide precursor protein may be processed to yield seven possibly bioactive peptides. In this work, two hymenoptaecin derived peptides were heterologously expressed and purified. The preliminary antimicrobial activity assays indicate varying bacteriostatic effects of different hymenoptaecin derived peptides against Escherichia coli D31 and Staphylococcus aureus which suggests a functional amplification of the immune response further increasing the antimicrobial potency of the ants. Furthermore, 257 genes were differentially expressed upon immune challenge of C. floridanus and most of the immune genes showing differential expression are involved in recognition of microbes or encode immune effectors rather than signalling components. Additionally, genes coding for proteins involved in storage and metabolism were downregulated upon immune challenge suggesting a trade-off between two energy-intensive processes in order to enhance effectiveness of the immune response. The analysis of gene expression via qRT-PCR was used for validation of the transcriptome data and revealed stage-specific immune gene regulation. Though the same tendencies of regulation were observed in larvae and adults, expression of several immune-related genes was generally more strongly induced in larvae. Immune gene expression levels depending on the developmental stage of C. floridanus are in agreement with observations in other insects and might suggest that animals from different stages revert to individual combinations of external and internal immunity upon infection. The haemolymph proteome of immune-challenged ants further established the immune-relevance of several proteins involved in classical immune signalling pathways, e.g. PRRs, extracellularly active proteases of the Toll signalling pathway and effector molecules such as AMPs, lysozymes and TEPs. Additionally, non-canonical proteins with putative immune function were enriched in immune-challenged haemolymph, e.g. Vitellogenins, NPC2-like proteins and Hemocytin. As known from previous studies, septic wounding also leads to the upregulation of genes involved in stress responses. In the haemolymph, proteins implicated in protein stabilisation and in the protection against oxidative stress and insecticides were enriched upon immune challenge. In order to identify additional putative immune effectors, haemolymph peptide samples from immune-challenged larvae and adults were analysed. The analysis in this work focussed on the identification of putative peptides produced via the secretory pathway as previously described for neuropeptides of C. floridanus. 567 regulated peptides derived from 39 proteins were identified in the larval haemolymph, whereas 342 regulated peptides derived from 13 proteins were found in the adult haemolymph. Most of the peptides are derived from hymenoptaecin or from putative uncharacterised proteins. One haemolymph peptide of immune-challenged larvae comprises the complete amino acid sequence of a predicted peptide derived from a Vitellogenin. Though the identified peptide lacks similarities to any known immune-related peptide, it is a suitable candidate for further functional analysis. To establish a stable infection with the endosymbionts, the bacteria have to be transmitted to the next generation of the ants. The vertical transmission of B. floridanus is guaranteed by bacterial infestation of oocytes. This work presents the first comprehensive and detailed description of the localisation of the bacterial endosymbionts in C. floridanus ovaries during oogenesis. Whereas the most apical part of the germarium, which contains the germ-line stem cells, is not infected by the bacteria, small somatic cells in the outer layers of each ovariole were found to be infected in the lower germarium. Only with the beginning of cystocyte differentiation, endosymbionts are exclusively transported from follicle cells into the growing oocytes, while nurse cells were never infected with B. floridanus. This infestation of the oocytes by bacteria very likely involves exocytosis-endocytosis processes between follicle cells and the oocytes. A previous study suggested a down-modulation of the immune response in the midgut tissue which may promote endosymbiont tolerance. Therefore, the expression of several potentially relevant immune genes was analysed in the ovarial tissue by qRT-PCR. The relatively low expression of genes involved in Toll and IMD signalling, and the high expression of genes encoding negative immune regulators, such as PGRP-LB, PGRP-SC2, and tollip, strongly suggest that a down-modulation of the immune response may also facilitate endosymbiont tolerance in the ovaries and thereby contribute to their vertical transmission. Overall, the present thesis improves the knowledge about the immune repertoire of C. floridanus and provides new candidates for further functional analyses. Moreover, the involvement of the host immune system in maintaining a "chronic" infection with symbiotic bacteria was confirmed and extended to the ovaries.},
  subject      = {Camponotus floridanus},
  language  = {en}
}
@phdthesis{Wanzek2016,
  author    = {Wanzek, Katharina},
  title     = {The investigation of the function of repair proteins at G-quadruplex structures in \(Saccharomyces\) \(cerevisiae\) revealed that Mms1 promotes genome stability},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142547},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {G-quadruplex structures are highly stable alternative DNA structures that can, when not properly regulated, impede replication fork progression and cause genome instability (Castillo Bosch et al, 2014; Crabbe et al, 2004; Koole et al, 2014; Kruisselbrink et al, 2008; London et al, 2008; Lopes et al, 2011; Paeschke et al, 2013; Paeschke et al, 2011; Piazza et al, 2015; Piazza et al, 2010; Piazza et al, 2012; Ribeyre et al, 2009; Sabouri et al, 2014; Sarkies et al, 2012; Sarkies et al, 2010; Schiavone et al, 2014; Wu \& Spies, 2016; Zimmer et al, 2016). The aim of this thesis was to identify novel G-quadruplex interacting proteins in Saccharomyces cerevisiae and to unravel their regulatory function at these structures to maintain genome integrity. Mms1 and Rtt101 were identified as G-quadruplex binding proteins in vitro via a pull-down experiment with subsequent mass spectrometry analysis. Rtt101, Mms1 and Mms22, which are all components of an ubiquitin ligase (Rtt101Mms1/Mms22), are important for the progression of the replication fork following fork stalling (Luke et al, 2006; Vaisica et al, 2011; Zaidi et al, 2008). The in vivo binding of endogenously tagged Mms1 to its target regions was analyzed genome-wide using chromatin-immunoprecipitation followed by deep-sequencing. Interestingly, Mms1 bound independently of Mms22 and Rtt101 to G-rich regions that have the potential to form G-quadruplex structures. In vitro, formation of G-quadruplex structures could be shown for the G-rich regions Mms1 bound to. This binding was observed throughout the cell cycle. Furthermore, the deletion of MMS1 caused replication fork stalling as evidenced by increased association of DNA Polymerase 2 at Mms1 dependent sites. A gross chromosomal rearrangement assay revealed that deletion of MMS1 results in a significantly increased genome instability at G-quadruplex motifs compared to G-rich or non-G-rich regions. Additionally, binding of the helicase Pif1, which unwinds G4 structures in vitro (Paeschke et al, 2013; Ribeyre et al, 2009; Sanders, 2010; Wallgren et al, 2016), to Mms1 binding sites was reduced in mms1 cells. The data presented in this thesis, together with published data, suggests a novel mechanistic model in which Mms1 binds to G-quadruplex structures and enables Pif1 association. This allows for replication fork progression and genome integrity.},
  subject      = {Quadruplex-DNS},
  language  = {en}
}
@phdthesis{Maurus2016,
  author    = {Maurus, Katja},
  title     = {Melanoma Maintenance by the AP1 Transcription Factor FOSL1},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142995},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Identifying novel driver genes in cancer remains a crucial step towards development of new therapeutic approaches and the basic understanding of the disease. This work describes the impact of the AP1 transcription activator component FOSL1 on melanoma maintenance. FOSL1 is strongly upregulated during the progression of melanoma and the protein abundance is highest in metastases. I found that the regulation of FOSL1 is strongly dependent on ERK1/2- and PI3K- signaling, two pathways frequently activated in melanoma. Moreover, the involvement of p53 in FOSL1 regulation in melanoma was investigated. Elevated levels of the tumor suppressor led to decreased FOSL1 protein levels in a miR34a/miR34c- dependent manner. The benefit of elevated FOSL1 amounts in human melanoma cell lines was analyzed by overexpression of FOSL1 in cell lines with low endogenous FOSL1 levels. Enhanced levels of FOSL1 had several pro-tumorigenic effects in human melanoma cell lines. Besides increased proliferation and migration rates, FOSL1 overexpression induced the colony forming ability of the cells. Additionally, FOSL1 was necessary for anchorage independent growth in 3D cell cultures. Microarray analyses revealed novel downstream effectors of FOSL1. On the one hand, FOSL1 was able to induce the transcription of different neuron-related genes, such as NEFL, NRP1 and TUBB3. On the other hand, FOSL1 influenced the transcription of DCT, a melanocyte specific gene, in dependence of the differentiation of the melanoma cell line, indicating dedifferentiation. Furthermore, FOSL1 induced the transcription of HMGA1, a chromatin remodeling protein with reprogramming ability, which is characteristic for stem cells. Consequently, the influence of HMGA1 on melanoma maintenance was investigated. In addition to decreased proliferation and reduced anoikis resistance, HMGA1 knockdown reduced melanoma cell survival. Interestingly, the FOSL1 induced pro-tumorigenic effects were demonstrated to be dependent on the HMGA1 level. HMGA1 manipulation reversed FOSL1 induced proliferation and colony forming ability, as well as the anchorage independent growth effect. In conclusion, I could show that additional FOSL1 confers a clear growth benefit to melanoma cells. This benefit is attributed to the induction of stem cell determinants, but can be blocked by the inhibition of the ERK1/2 or PI3K signaling pathways.},
  subject      = {Melanom},
  language  = {en}
}
@phdthesis{Erle2016,
  author    = {Erle, Thorsten Michael},
  title     = {A Grounded Approach to Psychological Perspective-Taking},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-143247},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {„Perspektiven{\"u}bernahme" bezeichnet die F{\"a}higkeit des Menschen, sich in die Lage eines anderen hineinzuversetzen. In der psychologischen Forschung unterscheidet man drei Arten der Perspektiven{\"u}bernahme, n{\"a}mlich perzeptuelle (visuo-spatiale), affektive (Empathie) und kognitive (Theory of Mind). Die letztgenannten Arten der Perspektiven{\"u}bernahme werden oft als „psychologische Perspektiven{\"u}bernahme" zusammengefasst. Diese Dissertation befasst sich mit der Frage, ob diese verschiedenen Arten der Perspektiven{\"u}bernahme als theoretisch unterscheidbare Konstrukte oder lediglich als Facetten ein und desselben Konstrukts angesehen werden sollten. Die Befundlage in der psychologischen Fachliteratur ist diesbez{\"u}glich nicht eindeutig. W{\"a}hrend einige Autoren Korrelationen zwischen verschiedenen Arten der Perspektiven{\"u}bernahme f{\"u}r zu gering erachten, um ein einheitliches Konstrukt zu konstatieren, bewerten andere Autoren Korrelationen derselben Gr{\"o}ße als Evidenz hierf{\"u}r. Ein weniger arbitr{\"a}res Vorgehen w{\"a}re es, experimentalpsychologisch zugrunde liegende Mechanismen zu identifizieren, die allen Arten der Perspektiven{\"u}bernahme gemein sind, und zu untersuchen, ob eine Manipulation dieser Mechanismen abh{\"a}ngige Maße affektiver, kognitiver und perzeptueller Perspektiven{\"u}bernahme gleichermaßen beeinflusst. Diesem Ansatz folgend macht die vorliegende Arbeit die Annahme, dass die mentale Selbstrotation des K{\"o}rperschemas in die Position einer anderen Person, der zentrale Mechanismus visuo-spatialer Perspektiven{\"u}bernahme, ein gemeinsamer Mechanismus aller Arten der Perspektiven{\"u}bernahme ist. Entgegen fr{\"u}herer Ans{\"a}tze wird diese Einheit somit nicht nur {\"u}ber die zentrale gemeinsame Funktionalit{\"a}t aller Arten von Perspektiven{\"u}bernahme, also dem Verlassen des egozentrischen Referenzrahmens zugunsten einer (visuellen, affektiven oder kognitiven) Fremdperspektive, gerechtfertigt, sondern mit der Annahme eines gemeinsamen zugrundeliegenden Mechanismus. Daraus wird die einfache Hypothese abgeleitet, dass visuo-spatiale Perspektiven{\"u}bernahme zu psychologischen Konsequenzen f{\"u}hren kann. Dies wurde in 6 Experimenten getestet. In diesen Experimenten mussten die Probanden zun{\"a}chst immer die visuelle Perspektive einer anderen Person einnehmen. Hierzu sahen die Probanden eine Person, die mit zwei Objekten an einem Tisch sitzt. In jedem Durchgang mussten die Probanden sich entscheiden, mit welcher Hand diese Person eines der beiden Objekte greifen w{\"u}rde. Dabei wurde die Position der Zielperson so manipuliert, dass sie in der H{\"a}lfte der F{\"a}lle im selben visuo-spatialen Referenzrahmen wie der Proband saß, was Perspektiven{\"u}bernahme zur L{\"o}sung der Aufgabe obsolet machte, w{\"a}hrend sie sich in den verbleibenden Durchg{\"a}ngen in einem anderen visuo-spatialen Referenzrahmen befand, so dass die Probanden die visuelle Perspektive der Zielperson {\"u}bernehmen mussten um die Aufgabe korrekt zu l{\"o}sen. Nach jedem Durchgang wurde dem Ziel dieser visuo-spatialen Aufgabe eine psychologische Eigenschaft zugeschrieben. Dies geschah im Rahmen eines abgewandelten Paradigmas zur Untersuchung der Ankerheuristik. Hierzu wurde den Probanden nach jedem Durchgang der visuo-spatialen Aufgabe eine Sch{\"a}tzfrage gestellt. Zeitgleich wurde die Antwort des Ziels bekannt gegeben. Entsprechend der Haupthypothese, dass visuo-spatiale Perspektiven{\"u}bernahme psychologische Konsequenzen erzeugen kann, konnte gezeigt werden, dass die Probanden nach visuo-spatialer Perspektiven{\"u}bernahme in h{\"o}herem Maße die Gedanken der Zielperson {\"u}bernahmen. Dies konnte sowohl anhand der absoluten Gr{\"o}ße des Ankereffekts, als auch anhand der Differenz zwischen den Urteilen der Probanden und der Zielperson, gezeigt werden. Weitere Experimente schlossen Stichprobeneigenschaften, die verwendeten Stimuli oder die Aufgabenschwierigkeit als Alternativerkl{\"a}rungen f{\"u}r diese Effekte aus. Die beiden letzten Experimente zeigten zudem, dass dieser Effekt spezifisch f{\"u}r alle Konstellationen ist, in denen eine mentale Selbstrotation in die Zielperspektive notwendig war und dass die {\"U}bernahme fremder Gedanken mit einem Gef{\"u}hl von {\"A}hnlichkeit assoziiert war. Zusammengenommen unterst{\"u}tzen die Ergebnisse dieser Arbeit die theoretisch abgeleitete Sicht eines einheitlichen Perspektiven{\"u}bernahme-Konstrukts und grenzen dieses zus{\"a}tzlich von verwandten Konstrukten ab. In der abschließenden Diskussion werden die Bedeutung dieser Befunde f{\"u}r die Forschung in den Bereichen Empathie, Theory of Mind, und Perspektiven{\"u}bernahme und ebenfalls praktische Implikationen der Ergebnisse aufgezeigt.},
  subject      = {Perspektiven{\"u}bernahme},
  language  = {en}
}
@phdthesis{Backhaus2016,
  author    = {Backhaus, Philipp},
  title     = {Effects of Transgenic Expression of Botulinum Toxins in Drosophila},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-143279},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Clostridial neurotoxins (botulinum toxins and tetanus toxin) disrupt neurotransmitter release by cleaving neuronal SNARE proteins. We generated transgenic flies allowing for conditional expression of different botulinum toxins and evaluated their potential as tools for the analysis of synaptic and neuronal network function in Drosophila melanogaster by applying biochemical assays and behavioral analysis. On the biochemical level, cleavage assays in cultured Drosophila S2 cells were performed and the cleavage efficiency was assessed via western blot analysis. We found that each botulinum toxin cleaves its Drosophila SNARE substrate but with variable efficiency. To investigate the cleavage efficiency in vivo, we examined lethality, larval peristaltic movements and vision dependent motion behavior of adult Drosophila after tissue-specific conditional botulinum toxin expression. Our results show that botulinum toxin type B and botulinum toxin type C represent effective alternatives to established transgenic effectors, i.e. tetanus toxin, interfering with neuronal and non-neuronal cell function in Drosophila and constitute valuable tools for the analysis of synaptic and network function.},
  subject      = {Botulinustoxin},
  language  = {en}
}
@phdthesis{Rodrigues2016,
  author    = {Rodrigues, Johannes},
  title     = {Let me change your mind… Frontal brain activity in a virtual T-maze},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-143280},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Frontal asymmetry, a construct invented by Richard Davidson, linking positive and negative valence as well as approach and withdrawal motivation to lateralized frontal brain activation has been investigated for over thirty years. The frontal activation patterns described as relevant were measured via alpha-band frequency activity (8-13 Hz) as a measurement of deactivation in electroencephalography (EEG) for homologous electrode pairs, especially for the electrode position F4/ F3 to account for the frontal relative lateralized brain activation. Three different theories about frontal activation patterns linked to motivational states were investigated in two studies. The valence theory of Davidson (1984; 1998a; 1998b) and its extension to the motivational direction theory by Harmon-Jones and Allen (1998) refers to the approach motivation with relative left frontal brain activity (indicated by relative right frontal alpha activity) and to withdrawal motivation with relative right frontal brain activation (indicated by relative left frontal alpha activity). The second theory proposed by Hewig and colleagues (2004; 2005; 2006) integrates the findings of Davidson and Harmon - Jones and Allen with the reinforcement sensitivity theory of Jeffrey A. Gray (1982, 1991). Hewig sees the lateralized frontal approach system and withdrawal system proposed by Davidson as subsystems of the behavioral activation system proposed by Gray and bilateral frontal activation as a biological marker for the behavioral activation system. The third theory investigated in the present studies is the theory from Wacker and colleagues (2003; 2008; 2010) where the frontal asymmetrical brain activation patterns are linked to the revised reinforcement sensitivity theory of Gray and McNaughton (2000). Here, right frontal brain activity (indicated by lower relative right frontal alpha activity) accounts for conflict, behavioral inhibition and activity of the revised behavioral inhibition system, while left frontal brain activation (indicated by lower relative left frontal alpha activity) stands for active behavior and the activity of the revised behavioral activation system as well as the activation of the revised flight fight freezing system. In order to investigate these three theories, a virtual reality T-maze paradigm was introduced to evoke motivational states in the participants, offering the opportunity to measure frontal brain activation patterns via EEG and behavior simultaneously in the first study. In the second study the virtual reality paradigm was additionally compared to mental imagery and a movie paradigm, two well-known state inducing paradigms in the research field of frontal asymmetry. In the two studies, there was confirming evidence for the theory of Hewig and colleages (2004; 2005; 2006), showing higher bilateral frontal activation for active behavior and lateralized frontal activation patterns for approach (left frontal brain activation) and avoidance (right frontal brain activation) behavior. Additionally a limitation for the capability model of anterior brain asymmetry proposed by Coan and colleagues (2006), where the frontal asymmetry should be dependent on the relevant traits driving the frontal asymmetry pattern if a relevant situation occurs, could be found. As the very intense virtual reality paradigm did not lead to a difference of frontal brain activation patterns compared to the mental imagery paradigm or the movie paradigm for the traits of the participants, the trait dependency of the frontal asymmetry in a relevant situation might not be given, if the intensity of the situation exceeds a certain level. Nevertheless there was an influence of the traits in the virtual reality T-maze paradigm, because the shown behavior in the maze was trait-dependent. The implications of the findings are multifarious, leading from possible objective personality testing via diversification of the virtual reality paradigm to even clinical implications for depression treatments based on changes in the lateralized frontal brain activation patterns for changes in the motivational aspects, but also for changes in bilateral frontal brain activation when it comes to the drive and preparedness for action in patients. Finally, with the limitation of the capability model, additional variance in the different findings about frontal asymmetry can be explained by taking the intensity of a state manipulation into account.},
  subject      = {Electroencephalographie},
  language  = {en}
}
@phdthesis{Pieczykolan2016,
  author    = {Pieczykolan, Aleksandra},
  title     = {Cross-Modal Action Control},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142356},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Multitasking als allgegenw{\"a}rtiges Ph{\"a}nomen wird heutzutage in verschiedenen wissenschaftlichen Disziplinen diskutiert. In der vorliegenden Arbeit wird Multitasking aus der Perspektive der kognitiven Verhaltenswissenschaften beleuchtet mit dem Fokus auf der Rolle von Konfliktl{\"o}sungs- prozessen bei der Verarbeitung von Mehrfacht{\"a}tigkeiten. Insbesondere liegt der Fokus auf kognitiven Mechanismen der crossmodalen Handlungskontrolle, d.h. der Kontrolle von zwei Handlungen in verschiedenen Effektorsystemen. Mit dem Ziel, den bisherigen Umfang derjenigen Handlungsmodalit{\"a}ten zu erweitern, die {\"u}blicherweise in Studien eingesetzt wurden, wurden okulomotorische Reaktionen (d.h. Sakkaden), die bisher als Handlungsmodalit{\"a}t in der Forschung vernachl{\"a}ssigt wurden, in Kombination mit Reaktionen in anderen Efffektorsystemen untersucht (d.h. mit manuellen und vokalen Reaktionen). Weiterhin wurde beabsichtigt, Mechanismen von Crosstalk zu spezifizieren, welches ein Erkl{\"a}rungskonzept darstellt, das sich auf den Aufgabeninhalt bezieht. Crosstalk erscheint besonders relevant f{\"u}r crossmodale Handlungen, da sich Handlungsmodalit{\"a}ten vor allem bez{\"u}glich ihrer Reaktionsmerkmale unterscheiden. In der vorliegenden Arbeit werden vier Studien berichtet, die auf jeweils zwei oder drei Experimenten beruhen. In Studie A wurden crossmodale Doppelreaktionen auf einen einzelnen Stimulus untersucht mit der Fragestellung, wie sich das Zusammenspiel des Vorhandenseins von Reaktionsalternativen und der Kompatibilit{\"a}t zwischen Reaktionen (also dem Crosstalkpotential) auswirkt. In drei Experimenten zeigte sich, dass Crosstalk in mehrere Komponenten dissoziiert werden kann, n{\"a}mlich eine Komponente, die auf der aktuellen Konfliktst{\"a}rke (Online-Crosstalk) basiert, und eine ged{\"a}chtnisbasierte Komponente, die entweder durch Restaktivit{\"a}t vergangener Handlungsanforderungen bestimmt wird (retrospektiver Crosstalk), oder durch Vorbereitung auf zuk{\"u}nftige Handlungsanforderungen (prospektiver Crosstalk). Studie B lieferte Evidenz daf{\"u}r, dass okulomotorische Reaktionen sowohl struktureller als auch inhaltsbasierte Interferenz unterliegen. In drei Experimenten wurde das Paradigma zeitlich {\"u}berlappender Aufgaben verwendet, bei dem zwei Stimuli mit zeitlichem Versatz pr{\"a}sentiert wurden, auf die jeweils mit einer okulomotorischen und einer manuellen Handlung reagiert werden musste. Dabei wurden sowohl Hinweise auf einen seriellen als auch auf einen parallelen Verarbeitungsmodus gefunden. Weiterhin deuteten die Ergebnisse darauf hin, dass abh{\"a}ngig von der Aufgabenkompatibilit{\"a}t zwischen diesen Verarbeitungsmodi gewechselt wurde, d.h. zu eher paralleler Verarbeitung bei kompatiblen Aufgabenanforderungen und zu eher serieller Verarbeitung bei inkompatiblen Aufgabenanforderungen. In Studie C wurden Verarbeitungspriorit{\"a}ten zwischen Effektorsystemen untersucht. In zwei Experimenten zeigte sich, dass das zuvor berichtete Verarbeitungsdominanzmuster repliziert werden konnte, bei der okulomotorische Reaktionen vokale Reaktionen dominieren und diese wiederum manuelle Reaktionen dominieren. Die relative St{\"a}rke der Dominanz konnte allerdings bei vorhandenem Reaktionskonflikt angepasst werden. Die Verarbeitungspriorit{\"a}ten wurden hierbei zum Teil in Richtung derjenigen Reaktion verschoben, in der bereits ein Konflikt im Bezug auf die Kompatibilit{\"a}t zwischen Stimulus und Reaktion gel{\"o}st werden musste. Dieses Ergebnis zeigt, dass Verarbeitungspriorit{\"a}ten flexibel an die spezifischen Handlungsanforderungen angepasst werden k{\"o}nnen. Studie D besch{\"a}ftigte sich mit einem bisher weitgehend vernachl{\"a}ssigten Bereich innerhalb der Doppelaufgabenforschung, n{\"a}mlich der Kontrolle der zeitlichen Reaktionsreihenfolge. In einer drei Experimente umfassenden Untersuchung wurden mehrere Faktoren variiert, die sich in fr{\"u}heren Studien bereits als relevant f{\"u}r Mechanismen der Doppelaufgabeninterferenz gezeigt haben. In der vorliegenden Studie wurde gezeigt, dass die finale Reaktionsreihenfolge in einem Handlungsdurchgang das Ergebnis eines kontinuierlichen Anpassungsprozesses ist, welcher auf dem Zusammenspiel mehrerer top-down-Faktoren, z.B. der Antizipation von Reaktionsmerkmalen, und mehrerer bottom-up-Faktoren, wie z.B. der Stimulusreihenfolge oder der Aufgabenkompatibilit{\"a}t, basiert. Die vorliegende Arbeit liefert somit einen wichtigen Beitrag zum Fortschritt des Verst{\"a}ndnisses der Verarbeitung komplexer Handlungsanforderungen aus der Perspektive crossmodaler Handlungen. Insbesondere wurden Spezifikationen f{\"u}r Mechanismen der Effektorpriorisierung und der Kontrolle der Reaktionsreihenfolge als auch eine neuartige Taxonomie von Crosstalk vorgestellt, welche als umfassende Rahmenvorstellung zur Erkl{\"a}rung von Interferenzmechanismen bei Kontrollprozessen von Mehrfachanforderungen dienlich sein kann.},
  subject      = {Kognition},
  language  = {en}
}
@phdthesis{Schweinlin2016,
  author    = {Schweinlin, Matthias Oliver},
  title     = {Development of advanced human intestinal in vitro models},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142571},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The main function of the small intestine is the absorption of essential nutrients, water and vitamins. Moreover, it constitutes a barrier protecting us from toxic xenobiotics and pathogens. For a better understanding of these processes, the development of intestinal in vitro models is of great interest to the study of pharmacological and pathological issues such as transport mechanisms and barrier function. Depending on the scientific questions, models of different complexity can be applied. In vitro Transwell® systems based on a porous PET-membrane enable the standardized study of transport mechanisms across the intestinal barrier as well as the investigation of the influence of target substances on barrier integrity. However, this artificial setup reflects only limited aspects of the physiology of the native small intestine and can pose an additional physical barrier. Hence, the applications of this model for tissue engineering are limited. Previously, tissue models based on a biological decellularized scaffold derived from porcine gut tissue were demonstrated to be a good alternative to the commonly used Transwell® system. This study showed that preserved biological extracellular matrix components like collagen and elastin provide a natural environment for the epithelial cells, promoting cell adhesion and growth. Intestinal epithelial cells such as Caco-2 cultured on such a scaffold showed a confluent, tight monolayer on the apical surface. Additionally, myofibroblasts were able to migrate into the scaffold supporting intestinal barrier formation. In this thesis, dendritic cells were additionally introduced to this model mimicking an important component of the immune system. This co-culture model was then successfully proven to be suitable for the screening of particle formulations developed as delivery system for cancer antigens in peroral vaccination studies. In particular, nanoparticles based on PLGA, PEG-PAGE-PLGA, Mannose-PEG-PAGE-PLGA and Chitosan were tested. Uptake studies revealed only slight differences in the transcellular transport rate among the different particles. Dendritic cells were shown to phagocytose the particles after they have passed the intestinal barrier. The particles demonstrated to be an effective carrier system to transport peptides across the intestinal barrier and therefore present a useful tool for the development of novel drugs. Furthermore, to mimic the complex structure and physiology of the gut including the presence of multiple different cell types, the Caco-2 cell line was replaced by primary intestinal cells to set up a de novo tissue model. To that end, intestinal crypts including undifferentiated stem cells and progenitor cells were isolated from human small intestinal tissue samples (jejunum) and expanded in vitro in organoid cultures. Cells were cultured on the decellularized porcine gut matrix in co-culture with intestinal myofibroblasts. These novel tissue models were maintained under either static or dynamic conditions. Primary intestinal epithelial cells formed a confluent monolayer including the major differentiated cell types positive for mucin (goblet cells), villin (enterocytes), chromogranin A (enteroendocrine cells) and lysozyme (paneth cells). Electron microscopy images depicted essential functional units of an intact epithelium, such as microvilli and tight junctions. FITC-dextran permeability and TEER measurements were used to assess tightness of the cell layer. Models showed characteristic transport activity for several reference substances. Mechanical stimulation of the cells by a dynamic culture system had a great impact on barrier integrity and transporter activity resulting in a tighter barrier and a higher efflux transporter activity. In Summary, the use of primary human intestinal cells combined with a biological decellularized scaffold offers a new and promising way to setup more physiological intestinal in vitro models. Maintenance of primary intestinal stem cells with their proliferation and differentiation potential together with adjusted culture protocols might help further improve the models. In particular, dynamic culture systems and co culture models proofed to be a first crucial steps towards a more physiological model. Such tissue models might be useful to improve the predictive power of in vitro models and in vitro in vivo correlation (IVIVC) studies. Moreover, these tissue models will be useful tools in preclinical studies to test pharmaceutical substances, probiotic active organisms, human pathogenic germs and could even be used to build up patient-specific tissue model for personalized medicine.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Karl2016,
  author    = {Karl, Stefan},
  title     = {Control Centrality in Non-Linear Biological Networks},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-150838},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Biological systems such as cells or whole organisms are governed by complex regulatory networks of transcription factors, hormones and other regulators which determine the behavior of the system depending on internal and external stimuli. In mathematical models of these networks, genes are represented by interacting "nodes" whose "value" represents the activity of the gene. Control processes in these regulatory networks are challenging to elucidate and quantify. Previous control centrality metrics, which aim to mathematically capture the ability of individual nodes to control biological systems, have been found to suffer from problems regarding biological plausibility. This thesis presents a new approach to control centrality in biological networks. Three types of network control are distinguished: Total control centrality quantifies the impact of gene mutations and identifies potential pharmacological targets such as genes involved in oncogenesis (e.g. zinc finger protein GLI2 or bone morphogenetic proteins in chondrocytes). Dynamic control centrality describes relaying functions as observed in signaling cascades (e.g control in mouse colon stem cells). Value control centrality measures the direct influence of the value of the node on the network (e.g. Indian hedgehog as an essential regulator of proliferation in chondrocytes). Well-defined network manipulations define all three centralities not only for nodes, but also for the interactions between them, enabling detailed insights into network pathways. The calculation of the new metrics is made possible by substantial computational improvements in the simulation algorithms for several widely used mathematical modeling paradigms for genetic regulatory networks, which are implemented in the regulatory network simulation framework Jimena created for this thesis. Applying the new metrics to biological networks and artificial random networks shows how these mathematical concepts correspond to experimentally verified gene functions and signaling pathways in immunity and cell differentiation. In contrast to controversial previous results even from the Barab{\´a}si group, all results indicate that the ability to control biological networks resides in only few driver nodes characterized by a high number of connections to the rest of the network. Autoregulatory loops strongly increase the controllability of the network, i.e. its ability to control itself, and biological networks are characterized by high controllability in conjunction with high robustness against mutations, a combination that can be achieved best in sparsely connected networks with densities (i.e. connections to nodes ratios) around 2.0 - 3.0. The new concepts are thus considerably narrowing the gap between network science and biology and can be used in various areas such as system modeling, plausibility trials and system analyses. Medical applications discussed in this thesis include the search for oncogenes and pharmacological targets, as well their functional characterization.},
  subject      = {Bioinformatik},
  language  = {en}
}
@phdthesis{Muenchow2016,
  author    = {M{\"u}nchow, Hannes},
  title     = {I feel, therefore I learn - Effectiveness of affect induction interventions and possible covariates on learning outcomes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-148432},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Affective states in the context of learning and achievement can influence the learning process essentially. The impact of affective states can be both directly on the learning performance and indirectly mediated via, for example, motivational processes. Positive activating affect is often associated with increased memory skills as well as advantages in creative problem solving. Negative activating affect on the other hand is regarded to impair learning outcomes because of promoting task-irrelevant thinking. While these relationships were found to be relatively stable in correlation studies, causal relationships have been examined rarely so far. This dissertation aims to investigate the effects of positive and negative affective states in multimedia learning settings and to identify potential moderating factors. Therefore, three experimental empirical studies on university students were conducted. In Experiment 1, N = 57 university students were randomly allocated to either a positive or negative affect induction group. Affects were elicited using short film clips. After a 20-minute learning phase in a hypertext-based multimedia learning environment on "functional neuroanatomy" the learners' knowledge as well as transfer performance were measured. It was assumed that inducing positive activating affect should enhance learning performance. Eliciting negative activating affect on the other hand should impair learning performance. However, it was found that the induction of negative activating affect prior to the learning phase resulted in slight deteriorations in knowledge. Contrary to the assumptions, inducing positive activating affect before the learning phase did not improve learning performance. Experiment 2 induced positive activating affect directly during learning. To induce affective states during the entire duration of the learning phase, Experiment 2 used an emotional design paradigm. Therefore, N = 111 university students were randomly assigned to learn either in an affect inducing multimedia learning environment (use of warm colours and round shapes) or an affectively neutral counterpart (using shades of grey and angular shapes) on the same topic as in Experiment 1. Again, knowledge as well as transfer performance were measured after learning for 20 minutes. In addition, positive and negative affective states were measured before and after learning. Complex interaction patterns between the treatment and initial affective states were found. Specifically, learners with high levels of positive affect before learning showed better transfer performance when they learned in the affect inducing learning environment. Regarding knowledge, those participants who reported high levels of negative activating affect prior to the learning period performed worse. However, the effect on knowledge did not occur for those students learning in the affect inducing learning environment. For knowledge, the treatment therefore protected against poorer performance due to high levels of negative affective states. Results of Experiment 2 showed that the induction of positive activating affect influenced learning performance positively when taking into account affective states prior to the learning phase. In order to confirm these interaction effects, a conceptual replication of the previous experiment was conducted in Experiment 3. Experiment 3 largely retained the former study design, but changed the learning materials and tests used. Analogous to Experiment 2, N = 145 university students learning for 20 minutes in either an affect inducing or an affectively neutral multimedia learning environment on "eukaryotic cell". To strengthen the treatment, Experiment 3 also used anthropomorphic design elements to induce affective states next to warm colours and round shapes. Moreover, in order to assess the change in affective states more exactly, an additional measurement of positive and negative affective states after half of the learning time was inserted. Knowledge and transfer were assessed again to measure learning performance. The learners' memory skills were used as an additional learning outcome. To control the influence of potential confounding variables, the participants' general and current achievement motivation as well as interest, and emotion regulation skills were measured. Contrary to the assumptions, Experiment 3 could not confirm the interaction effects of Experiment 2. Instead, there was a significant impact of positive activating affect prior to the learning phase on transfer, irrespective of the learners' group affiliation. This effect was further independent of the control variables that were measured. Nevertheless, the results of Experiment 3 fit into the picture of findings regarding "emotional design" in hypermedia learning settings. To date, the few publications that have used this approach propose heterogeneous results, even when using identical materials and procedures.},
  subject      = {Affekt},
  language  = {en}
}
@phdthesis{Pfeuffer2016,
  author    = {Pfeuffer, Rebekka Christina},
  title     = {Growth and characterization of II-VI semiconductor nanowires grown by Au catalyst assisted molecular beam epitaxy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141385},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In the present PhD thesis the control of the morphology, such as the diameter, the length, the orientation, the density, and the crystalline quality of 1D ZnSe NWs grown by MBE for optical and transport applications has been achieved.},
  subject      = {Zinkselenid},
  language  = {en}
}
@phdthesis{Hennighausen2016,
  author    = {Hennighausen, Anna Christine},
  title     = {Costly signaling with mobile devices: An evolutionary psychological perspective on smartphones},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141049},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In the last decade, mobile device ownership has largely increased. In particular, smartphone ownership is constantly rising (A. Smith, 2015; Statista, 2016a), and there is a real hype for luxury brand smartphones (Griffin, 2015). These observations raise the question of which functions smartphones serve in addition to their original purposes of making and receiving calls, searching for information, and organizing. Beyond these obvious functions, studies suggest that smartphones express fashion, lifestyle, and one's economic status (e.g., B{\o}dker et al., 2009; Statista, 2016b; Vanden Abeele, Antheunis, \& Schouten, 2014). Specifically, individuals seem to purchase and use conspicuous luxury brand smartphones to display and enhance status (D. Kim et al., 2014; M{\"u}ller-Lietzkow et al., 2014; Suki, 2013). But how does owning a conspicuous, high-status smartphone contribute to status, and which benefits may these status boosts provide to their owners? From an evolutionary perspective, status carries a lot of advantages, particularly for males; high status grants them priority access to resources and correlates with their mating success (van Vugt \& Tybur, 2016). In this sense, research suggests that men conspicuously display their cell phones to attract mates and to distinguish themselves from rivals (Lycett \& Dunbar, 2000). In a similar vein, evolutionarily informed studies on conspicuous consumption indicate that the purchase and display of conspicuous luxuries (including mobile phones and smartphones) relate to a man's interest in uncommitted sexual relationships and enhance his desirability as a short-term mate (Hennighausen \& Schwab, 2014; Saad, 2013; Sundie et al., 2011). Drawing on these findings, this doctoral dissertation investigated how a man is perceived given that he is an owner of a high-status (vs. nonconspicuous, low-status) smartphone as a romantic partner and male rival. This was done in three experiments. In addition, it was examined how male conspicuous consumption of smartphones interacted with further traits that signal a man's mate quality, namely facial attractiveness (Studies 1 and 2) and social dominance (Study 3). Study 1 revealed that men and women perceived a male owner of a conspicuous smartphone as a less desirable long-term mate and as more inclined toward short-term mating. Study 2 replicated these results and showed that men and women assigned traits that are associated with short-term mating (e.g., low loyalty, interest in flirts, availability of tangible resources) to a male owner of a conspicuous smartphone and perceived him as a stronger male rival and mate poacher, and less as a friend. The results of Study 2 further suggested that specifically more attractive men might benefit from owning a conspicuous smartphone in a short-term mating context and might be hence considered as stronger male rivals. Study 3 partially replicated the findings of Studies 1 and 2 pertaining to the effects of owning a conspicuous smartphone. Study 3 did not show different effects of conspicuous consumption of smartphones on perceptions of a man dependent on the level of his social dominance. To conclude, the findings of this doctoral dissertation suggest that owning a conspicuous, high-status smartphone might not only serve proximate functions (e.g., making and receiving calls, organization) but also ultimate functions, which relate to mating and reproduction. The results indicate that owning a conspicuous smartphone might yield benefits for men in a short-term rather than in a long-term mating context. Furthermore, more attractive men appear to benefit more from owning a conspicuous smartphone than less attractive men. These findings provide further insights into the motivations that underlie men's purchases and displays of conspicuous, high-status smartphones from luxury brands that reach beyond the proximate causes frequently described in media and consumer psychological research. By applying an evolutionary perspective, this doctoral dissertation demonstrates the power and utility of this research paradigm for media psychological research and shows how combining a proximate and ultimate perspective adds to a more profound understanding of smartphone phenomena.},
  subject      = {Verbraucher},
  language  = {en}
}
@phdthesis{Milenkoski2016,
  author    = {Milenkoski, Aleksandar},
  title     = {Evaluation of Intrusion Detection Systems in Virtualized Environments},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141846},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Virtualization allows the creation of virtual instances of physical devices, such as network and processing units. In a virtualized system, governed by a hypervisor, resources are shared among virtual machines (VMs). Virtualization has been receiving increasing interest as away to reduce costs through server consolidation and to enhance the flexibility of physical infrastructures. Although virtualization provides many benefits, it introduces new security challenges; that is, the introduction of a hypervisor introduces threats since hypervisors expose new attack surfaces. Intrusion detection is a common cyber security mechanism whose task is to detect malicious activities in host and/or network environments. This enables timely reaction in order to stop an on-going attack, or to mitigate the impact of a security breach. The wide adoption of virtualization has resulted in the increasingly common practice of deploying conventional intrusion detection systems (IDSs), for example, hardware IDS appliances or common software-based IDSs, in designated VMs as virtual network functions (VNFs). In addition, the research and industrial communities have developed IDSs specifically designed to operate in virtualized environments (i.e., hypervisorbased IDSs), with components both inside the hypervisor and in a designated VM. The latter are becoming increasingly common with the growing proliferation of virtualized data centers and the adoption of the cloud computing paradigm, for which virtualization is as a key enabling technology. To minimize the risk of security breaches, methods and techniques for evaluating IDSs in an accurate manner are essential. For instance, one may compare different IDSs in terms of their attack detection accuracy in order to identify and deploy the IDS that operates optimally in a given environment, thereby reducing the risks of a security breach. However, methods and techniques for realistic and accurate evaluation of the attack detection accuracy of IDSs in virtualized environments (i.e., IDSs deployed as VNFs or hypervisor-based IDSs) are lacking. That is, workloads that exercise the sensors of an evaluated IDS and contain attacks targeting hypervisors are needed. Attacks targeting hypervisors are of high severity since they may result in, for example, altering the hypervisors's memory and thus enabling the execution of malicious code with hypervisor privileges. In addition, there are no metrics and measurement methodologies for accurately quantifying the attack detection accuracy of IDSs in virtualized environments with elastic resource provisioning (i.e., on-demand allocation or deallocation of virtualized hardware resources to VMs). Modern hypervisors allow for hotplugging virtual CPUs and memory on the designated VM where the intrusion detection engine of hypervisor-based IDSs, as well as of IDSs deployed as VNFs, typically operates. Resource hotplugging may have a significant impact on the attack detection accuracy of an evaluated IDS, which is not taken into account by existing metrics for quantifying IDS attack detection accuracy. This may lead to inaccurate measurements, which, in turn, may result in the deployment of misconfigured or ill-performing IDSs, increasing the risk of security breaches. This thesis presents contributions that span the standard components of any system evaluation scenario: workloads, metrics, and measurement methodologies. The scientific contributions of this thesis are: A comprehensive systematization of the common practices and the state-of-theart on IDS evaluation. This includes: (i) a definition of an IDS evaluation design space allowing to put existing practical and theoretical work into a common context in a systematic manner; (ii) an overview of common practices in IDS evaluation reviewing evaluation approaches and methods related to each part of the design space; (iii) and a set of case studies demonstrating how different IDS evaluation approaches are applied in practice. Given the significant amount of existing practical and theoretical work related to IDS evaluation, the presented systematization is beneficial for improving the general understanding of the topic by providing an overview of the current state of the field. In addition, it is beneficial for identifying and contrasting advantages and disadvantages of different IDS evaluation methods and practices, while also helping to identify specific requirements and best practices for evaluating current and future IDSs. An in-depth analysis of common vulnerabilities of modern hypervisors as well as a set of attack models capturing the activities of attackers triggering these vulnerabilities. The analysis includes 35 representative vulnerabilities of hypercall handlers (i.e., hypercall vulnerabilities). Hypercalls are software traps from a kernel of a VM to the hypervisor. The hypercall interface of hypervisors, among device drivers and VM exit events, is one of the attack surfaces that hypervisors expose. Triggering a hypercall vulnerability may lead to a crash of the hypervisor or to altering the hypervisor's memory. We analyze the origins of the considered hypercall vulnerabilities, demonstrate and analyze possible attacks that trigger them (i.e., hypercall attacks), develop hypercall attack models(i.e., systematized activities of attackers targeting the hypercall interface), and discuss future research directions focusing on approaches for securing hypercall interfaces. A novel approach for evaluating IDSs enabling the generation of workloads that contain attacks targeting hypervisors, that is, hypercall attacks. We propose an approach for evaluating IDSs using attack injection (i.e., controlled execution of attacks during regular operation of the environment where an IDS under test is deployed). The injection of attacks is performed based on attack models that capture realistic attack scenarios. We use the hypercall attack models developed as part of this thesis for injecting hypercall attacks. A novel metric and measurement methodology for quantifying the attack detection accuracy of IDSs in virtualized environments that feature elastic resource provisioning. We demonstrate how the elasticity of resource allocations in such environments may impact the IDS attack detection accuracy and show that using existing metrics in such environments may lead to practically challenging and inaccurate measurements. We also demonstrate the practical use of the metric we propose through a set of case studies, where we evaluate common conventional IDSs deployed as VNFs. In summary, this thesis presents the first systematization of the state-of-the-art on IDS evaluation, considering workloads, metrics and measurement methodologies as integral parts of every IDS evaluation approach. In addition, we are the first to examine the hypercall attack surface of hypervisors in detail and to propose an approach using attack injection for evaluating IDSs in virtualized environments. Finally, this thesis presents the first metric and measurement methodology for quantifying the attack detection accuracy of IDSs in virtualized environments that feature elastic resource provisioning. From a technical perspective, as part of the proposed approach for evaluating IDSsthis thesis presents hInjector, a tool for injecting hypercall attacks. We designed hInjector to enable the rigorous, representative, and practically feasible evaluation of IDSs using attack injection. We demonstrate the application and practical usefulness of hInjector, as well as of the proposed approach, by evaluating a representative hypervisor-based IDS designed to detect hypercall attacks. While we focus on evaluating the capabilities of IDSs to detect hypercall attacks, the proposed IDS evaluation approach can be generalized and applied in a broader context. For example, it may be directly used to also evaluate security mechanisms of hypervisors, such as hypercall access control (AC) mechanisms. It may also be applied to evaluate the capabilities of IDSs to detect attacks involving operations that are functionally similar to hypercalls, for example, the input/output control (ioctl) calls that the Kernel-based Virtual Machine (KVM) hypervisor supports. For IDSs in virtualized environments featuring elastic resource provisioning, our approach for injecting hypercall attacks can be applied in combination with the attack detection accuracy metric and measurement methodology we propose. Our approach for injecting hypercall attacks, and our metric and measurement methodology, can also be applied independently beyond the scenarios considered in this thesis. The wide spectrum of security mechanisms in virtualized environments whose evaluation can directly benefit from the contributions of this thesis (e.g., hypervisor-based IDSs, IDSs deployed as VNFs, and AC mechanisms) reflects the practical implication of the thesis.},
  subject      = {Eindringerkennung},
  language  = {en}
}
@phdthesis{Vaeth2016,
  author    = {V{\"a}th, Stefan Kilian},
  title     = {On the Role of Spin States in Organic Semiconductor Devices},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141894},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The present work addressed the influence of spins on fundamental processes in organic semiconductors. In most cases, the role of spins in the conversion of sun light into electricity was of particular interest. However, also the reversed process, an electric current creating luminescence, was investigated by means of spin sensitive measurements. In this work, many material systems were probed with a variety of innovative detection techniques based on electron paramagnetic resonance spectroscopy. More precisely, the observable could be customized which resulted in the experimental techniques photoluminescence detected magnetic resonance (PLDMR), electrically detected magnetic resonance (EDMR), and electroluminescence detected magnetic resonance (ELDMR). Besides the commonly used continuous wave EPR spectroscopy, this selection of measurement methods yielded an access to almost all intermediate steps occurring in organic semiconductors during the conversion of light into electricity and vice versa. Special attention was paid to the fact that all results were applicable to realistic working conditions of the investigated devices, i.e. room temperature application and realistic illumination conditions.},
  subject      = {Organischer Halbleiter},
  language  = {en}
}
@phdthesis{Sivadasan2016,
  author    = {Sivadasan, Rajeeve},
  title     = {The role of RNA binding proteins in motoneuron diseases},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141907},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Motoneuron diseases form a heterogeneous group of pathologies characterized by the progressive degeneration of motoneurons. More and more genetic factors associated with motoneuron diseases encode proteins that have a function in RNA metabolism, suggesting that disturbed RNA metabolism could be a common underlying problem in several, perhaps all, forms of motoneuron diseases. Recent results suggest that SMN interacts with hnRNP R and TDP-43 in neuronal processes, which are not part of the classical SMN complex. This point to an additional function of SMN, which could contribute to the high vulnerability of spinal motoneurons in spinal muscular atrophy (SMA) and amyotrophic lateral sclerosis (ALS). The current study elucidates functional links between SMN, the causative factor of SMA (spinal muscular atrophy), hnRNP R, and TDP-43, a genetic factor in ALS (amyotrophic lateral sclerosis). In order to characterize the functional interaction of SMN with hnRNP R and TDP-43, we produced recombinant proteins and investigated their interaction by co-immunoprecipitation. These proteins bind directly to each other, indicating that no other co-factors are needed for this interaction. SMN potentiates the ability of hnRNP R and TDP-43 to bind to ß-actin mRNA. Depletion of SMN alters the subcellular distribution of hnRNP R in motoneurons both in SMN-knockdown motoneurons and SMA mutant mouse (delta7 SMA). These data point to functions of SMN beyond snRNP assembly which could be crucial for recruitment and transport of RNA particles into axons and axon terminals, a mechanism which may contribute to SMA pathogenesis and ALS. ALS and FTLD (frontotemporal lobar degeneration) are linked by several lines of evidence with respect to clinical and pathological characteristics. Both sporadic and familial forms are a feature of the ALS-FTLD spectrum, with numerous genes having been associated with these pathological conditions. Both diseases are characterized by the pathological cellular aggregation of proteins. Interestingly, some of these proteins such as TDP-43 and FUS have also common relations not only with ALS-FTLD but also with SMA. Intronic hexanucleotide expansions in C9ORF72 are common in ALS and FTLD but it is unknown whether loss of function, toxicity by the expanded RNA or dipeptides from non ATG-initiated translation is responsible for the pathophysiology. This study tries to characterize the cellular function of C9ORF72 protein. To address this, lentiviral based knockdown and overexpression of C9ORF72 was used in isolated mouse motoneurons. The results clearly show that survival of these motoneurons was not affected by altered C9ORF72 levels, whereas adverse effects on axon growth and growth cone size became apparent after C9ORF72 suppression. Determining the protein interactome revealed several proteins in complexes with C9ORF72. Interestingly, C9ORF72 is present in a complex with cofilin and other actin binding proteins that modulate actin dynamics. These interactions were confirmed both by co-precipitation analyses and in particular by functional studies showing altered actin dynamics in motoneurons with reduced levels of C9ORF72. Importantly, the phosphorylation of cofilin is enhanced in C9ORF72 depleted motoneurons and patient derived lymphoblastoid cells with reduced C9ORF72 levels. These findings indicate that C9ORF72 regulates axonal actin dynamics and the loss of this function could contribute to disease pathomechanisms in ALS and FTLD.},
  subject      = {Motoneuron},
  language  = {en}
}
@phdthesis{Reinhold2016,
  author    = {Reinhold, Ann-Kristin},
  title     = {New players in neuropathic pain? microRNA expression in dorsal root ganglia and differential transcriptional profiling in primary sensory neurons},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-140314},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Neuropathic pain, caused by neuronal damage, is a severely impairing mostly chronic condition. Its underlying molecular mechanisms have not yet been thoroughly understood in their variety. In this doctoral thesis, I investigated the role of microRNAs (miRNAs) in a murine model of peripheral neuropathic pain. MiRNAs are small, non-coding RNAs known to play a crucial role in post-transcriptional gene regulation, mainly in cell proliferation and differentiation. Initially, expression patterns in affected dorsal root ganglia (DRG) at different time points after setting a peripheral nerve lesion were studied. DRG showed an increasingly differential expression pattern over the course of one week. Interestingly, a similar effect, albeit to a smaller extent, was observed in corresponding contralateral ganglia. Five miRNA (miR-124, miR-137, miR-183, miR-27b, and miR-505) were further analysed. qPCR, in situ hybridization, and bioinformatical analysis point towards a role for miR-137 and -183 in neuropathic pain as both were downregulated. Furthermore, miR-137 is shown to be specific for non-peptidergic non-myelinated nociceptors (C fibres) in DRG. As the ganglia consist of highly heterocellular tissue, I also developed a neuron-specific approach. Primarily damaged neurons were separated from intact adjacent neurons using fluorescence-activated cell-sorting and their gene expression pattern was analysed using a microarray. Thereby, not only were information obtained about mRNA expression in both groups but, by bioinformatical tools, also inferences on miRNA involvement. The general expression pattern was consistent with previous findings. Still, several genes were found differentially expressed that had not been described in this context before. Among these are corticoliberin or cation-regulating proteins like Otopetrin1. Bioinformatical data conformed, in part, to results from whole DRG, e.g. they implied a down-regulation of miR-124, -137, and -183. However, these results were not significant. In summary, I found that a) miRNA expression in DRG is influenced by nerve lesions typical of neuropathic pain and that b) these changes develop simultaneously to over-expression of galanin, a marker for neuronal damage. Furthermore, several miRNAs (miR-183, -137) exhibit distinct expression patterns in whole-DRG as well as in neuron-specific approaches. Therefore, further investigation of their possible role in initiation and maintenance of neuropathic pain seems promising. Finally, the differential expression of genes like Corticoliberin or Otopetrin 1, previously not described in neuropathic pain, has already resulted in follow-up projects.},
  subject      = {Schmerzforschung},
  language  = {en}
}
@phdthesis{Baur2016,
  author    = {Baur, Ramona},
  title     = {Adult Attention-Deficit/Hyperactivity Disorder (ADHD), Emotion Processing, and Emotion Regulation in Virtual Reality},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142064},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Attention-Deficit/Hyperactivity Disorder (ADHD) is characterized by symptoms of inattentiveness and hyperactivity/impulsivity. Besides, increasing evidence points to ADHD patients showing emotional dysfunctions and concomitant problems in social life. However, systematic research on emotional dysfunctions in ADHD is still rare, and to date most studies lack conceptual differentiation between emotion processing and emotion regulation. The aim of this thesis was to systematically investigate emotion processing and emotion regulation in adult ADHD in a virtual reality paradigm implementing social interaction. Emotional reactions were assessed on experiential, physiological, and behavioral levels. Experiment 1 was conducted to develop a virtual penalty kicking paradigm implying social feedback and to test it in a healthy sample. This paradigm should then be applied in ADHD patients later on. Pleasant and unpleasant trials in this paradigm consisted of hits respectively misses and subsequent feedback from a virtual coach. In neutral trials, participants were teleported to different spots of the virtual stadium. Results indicated increased positive affectivity (higher valence and arousal ratings, higher zygomaticus activations, and higher expression rates of positive emotional behavior) in response to pleasant compared to neutral trials. Reactions to unpleasant trials were contradictory, indicating increased levels of both positive and negative affectivity, compared to neutral trials. Unpleasant vs. neutral trials revealed lower valence ratings, higher arousal ratings, higher zygomaticus activations, slightly lower corrugator activations, and higher expression rates of both positive and negative emotional behavior. The intensity of emotional reactions correlated with experienced presence in the virtual reality. To better understand the impact of hits or misses per se vs. hits or misses with coach feedback healthy participants' emotional reactions, only 50\% of all shots were followed by coach feedback in experiment 2. Neutral trials consisted of shots over the free soccer field which were followed by coach feedback in 50 \% of all trials. Shots and feedback evoked more extreme valence and arousal ratings, higher zygomaticus activations, lower corrugator activations, and higher skin conductance responses than shots alone across emotional conditions. Again, results speak for the induction of positive emotions in pleasant trials whereas the induction of negative emotions in unpleasant trials seems ambiguous. Technical improvements of the virtual reality were reflected in higher presence ratings than in experiment 1. Experiment 3 investigated emotional reactions of adult ADHD patients and healthy controls after emotion processing and response-focused emotion regulation. Participants successively went through an ostensible online ball-tossing game (cyber ball) inducing negative emotions, and an adapted version of the virtual penalty kicking game. Throughout cyber ball, participants were included or ostracized by two other players in different experimental blocks. Participants were instructed to explicitly show, not regulate, or hide their emotions in different experimental blocks. Results provided some evidence for deficient processing of positive emotions in ADHD. Patients reported slightly lower positive affect than controls during cyber ball, gave lower valence ratings than controls in response to pleasant penalty kicking trials, and showed lower zygomaticus activations than controls especially during penalty kicking. Patients in comparison with controls showed slightly increased processing of unpleasant events during cyber ball (higher ratings of negative affect, especially in response to ostracism), but not during penalty kicking. Patients showed lower baseline skin conductance levels than controls, and impaired skin conductance modulations. Compared to controls, patients showed slight over-expression of positive as well as negative emotional behavior. Emotion regulation analyses revealed no major difficulties of ADHD vs. controls in altering their emotional reactions through deliberate response modulation. Moreover, patients reported to habitually apply adaptive emotion regulation strategies even more frequently than controls. The analyses of genetic high-risk vs. low-risk groups for ADHD across the whole sample revealed similar results as analyses for patients vs. controls for zygomaticus modulations during emotion processing, and for modulations of emotional reactions due to emotion regulation. To sum up, the virtual penalty kicking paradigm proved to be successful for the induction of positive, but not negative emotions. The importance of presence in virtual reality for the intensity of induced emotions could be replicated. ADHD patients showed impaired processing of primarily positive emotions. Aberrations in negative emotional responding were less clear and need further investigation. Results point to adult ADHD in comparison to healthy controls suffering from baseline deficits in autonomic arousal and deficits in arousal modulation. Deficits of ADHD in the deliberate application of response-focused emotion regulation could not be found.},
  subject      = {Aufmerksamkeitsdefizit-Syndrom},
  language  = {en}
}
@phdthesis{Riano2016,
  author    = {Ria{\~n}o, Rub{\´e}n Felipe},
  title     = {BTN3A1 in the immune response of Vγ9Vδ2 T cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142084},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Human Vγ9Vδ2 T cells are the main γδ T cell subset in the circulation, accounting for up to 5\% of the total peripheral blood lymphocyte population. They have been suggested to be important in response to tumors and infections. Their immune mechanisms encompass cell killing via cytotoxicity and secretion of pro-inflammatory cytokines such as IFNγ and tumor necrosis factor (TNF). The main stimulators of Vγ9Vδ2 T cells are isopentenyl pyrophosphate (IPP) and (E)-4-hydroxy-3-methyl-but-2-enyl pyrophosphate (HMBPP), denominated phosphoantigens (PAg). A major advance in the understanding of PAg detection and Vγ9Vδ2 T cell activation has been the identification of the butyrophlin 3A (BTN3A) proteins as key mediators in these processes. In humans, three isoforms constitute the BTN3A family: BTN3A1, BTN3A2, and BTN3A3; and their genes are localized on the short arm of chromosome 6. The role of BTN3A1 has been highlighted by BTN3A-specific monoclonal antibody 20.1 (mAb 20.1), which has an agonist effect and causes proliferation, expansion, and activation of primary human Vγ9Vδ2 T cells. On the other hand, BTN3A-specific monoclonal antibody 103.2 (mAb 103.2) is antagonistic, inhibiting the Vγ9Vδ2 T cell response. The actual mechanism underlying both PAg- and mAb 20.1-mediated activation is not completely elucidated, but the importance of BTN3A1 is clear. The main objective of this dissertation was to characterize the role of BTN3A1 in the PAg-dependent and PAg-independent Vγ9Vδ2 T cell activation and to evaluate its contribution in the response to influeza A virus infected cells. This research work demonstrated, by using Vγ9Vδ2 TCR MOP-transduced murine cells (reporter cells), that human chromosome 6 (Chr6) is mandatory for PAg-induced stimulation, but not for stimulation with mAb 20.1. The reporter cells responded to mAb 20.1 in cultures with BTN3A1-transduced Chinese hamster ovary cells (CHO BTN3A1) as antigen presenting cells. Nevertheless, for PAg-dependent activation the presence of Chr6 in CHO BTN3A1 was mandatory. Although reporter cells expressing clonotypically different Vγ9Vδ2 TCRs showed similar PAg response, they clearly differed in the mAb 20.1 response. The reporter cell line transduced with Vγ9Vδ2 TCR D1C55 demonstrated essentially no response to mAb 20.1 compared to Vγ9Vδ2 TCR MOP cells. These findings were further supported by experiments performed with human PBMCs-derived Vγ9Vδ2 T cell clones. The results indicate heterogeneity in the PAg- and 20.1-dependent responses, in terms of CD25 and CD69 expression, among three different Vγ9Vδ2 T cells clones. Co-cultures of reporter cells with Raji RT1BI and PAg plus mAb 20.1 or single chain antibody 20.1 (sc 20.1) revealed no additive or synergistic activating effects. In contrast, mAb 20.1 or sc 20.1 inhibited the PAg-mediated activation of the reporter cells. The comparison of the relative contribution of the isoforms BTN3A2 and BTN3A3, in the activation of Vγ9Vδ2 T cells, was undertaken by overexpression of these isoforms in CHO cells. The results showed that BTN3A2 contributes to both PAg- and mAb-induced Vγ9Vδ2 T cell activation. On the contrary, BTN3A3 does not support PAg-mediated γδ T cell response. Additionally, mutations in the proposed PAg- and mAb 20.1-binding sites of the extracellular BTN3A1 domain were generated by means of site-directed mutagenesis. These mutations revoked the mAb 20.1-induced Vγ9Vδ2 T cell activation, but not that induced by PAg. Finally, co-cultures of Vγ9Vδ2 TCR MOP-transduced murine reporter cells with influenza A/PR/8/34-infected cells, or infection of PBMCs with this virus strain indicated that BTN3A1 might be dispensable for the Vγ9Vδ2 T cell response against influenza A. The data of this research work points out that: i) in addition to BTN3A1, other Chr6-encoded genes are necessary for Vγ9Vδ2 T cell activation with PAg; ii) clonotypical (CDR3) differences influence the PAg- and mAb 20.1-mediated Vγ9Vδ2 T cell activation; iii) the PAg- and mAb 20.1-induced responses are not synergistic and interfere with each other; iv) BTN3A2 and BTN3A3 isoforms differ in the ability to support PAg- or mAb 20.1-dependent Vγ9Vδ2 T cell activation; v) the importance of the intracellular B30.2 domain of BTN3A1, in the Vγ9Vδ2 T cell activation, might be higher than that of the extracellular domain; and vi) in spite of the importance of BTN3A1 in the activation of Vγ9Vδ2 T cells, it is possible that many molecules with redundant functions are involved in the elimination of influenza virus infection by these cells. In summary, it is possible to hypothesize a model in which BTN3A1 detects prenyl pyrophosphates in the cytoplasm via its B30.2 domain and in association with another protein(s). The binding of PAg to this domain induces a multimerization of BTN3A1 or a conformational change of its extracellular domain (mimicked by mAb 20.1). These modifications might be recognized by the Vγ9Vδ2 TCR or by an associated T cell protein. In the case that the TCR directly recognizes BTN3A1, the intensity of the response will depend on the Vγ9Vδ2 TCR clonotype. Future research will allow to gain a better understanding of BTN3A1, its interaction with other proteins, its actual role in the activation of Vγ9Vδ2 T cells, and its importance in specific models of cancer or infection. This knowledge will be necessary to transform these cells into effective tools in the clinic.},
  subject      = {T-Lymphozyt},
  language  = {en}
}
@phdthesis{Schreyeck2016,
  author    = {Schreyeck, Steffen},
  title     = {Molecular Beam Epitaxy and Characterization of Bi-Based V\(_2\)VI\(_3\) Topological Insulators},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145812},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The present thesis is addressed to the growth and characterization of Bi-based V2VI3 topological insulators (TIs). The TIs were grown by molecular beam epitaxy (MBE) on differently passivated Si(111) substrates, as well as InP(111) substrates. This allows the study of the influence of the substrate on the structural and electrical properties of the TIs. The Bi2Se3 layers show a change of mosaicity-tilt and -twist for growth on the differently prepared Si(111) substrates, as well as a significant increase of crystalline quality for growth on the lateral nearly lattice matched InP(111). The rocking curve FWHMs observed for thick layers grown on InP are comparable to these of common zincblende layers, which are close to the resolution limit of standard high resolution X-ray diffraction (HRXRD) setups. The unexpected high structural crystalline quality achieved in this material system is remarkable due to the presence of weak van der Waals bonds between every block of five atomic layers, i.e. a quintuple layer (QL), in growth direction. In addition to the mosaicity also twin domains, present in films of the V2VI3 material system, are studied. The twin defects are observed in Bi2Se3 layers grown on Si(111) and lattice matched InP(111) suggesting that the two dimensional surface lattice of the substrates can not determine the stacking order ABCABC... or ACBACB... in locally separated growth seeds. Therefore the growth on misoriented and rough InP(111) is analyzed. The rough InP(111) with its facets within a hollow exceeding the height of a QL is able to provide its stacking information to the five atomic layers within a QL. By varying the roughness of the InP substrate surface, due to thermal annealing, the influence on the twinning within the layer is confirmed resulting in a complete suppression of twin domains on rough InP(111). Focusing on the electrical properties of the Bi2Se3 films, the increased structural quality for films grown on lattice matched flat InP(111)B results in a marginal reduction of carrier density by about 10\% compared to the layers grown on H-passivated Si(111), whereas the suppression of twin domains for growth on rough InP(111)B resulted in a reduction of carrier density by an order of magnitude. This implies, that the twin domains are a main crystal defect responsible for the high carrier density in the presented Bi2Se3 thin films. Besides the binary Bi2Se3 also alloys with Sb and Te are fabricated to examine the influence of the compound specific point defects on the carrier density. Therefore growth series of the ternary materials Bi2Te(3-y)Se(y), Bi(2-x)Sb(x)Se3, and Bi(2-x)Sb(x)Te3, as well as the quaternary Bi(2-x)Sb(x)Te(3-y)Se(y) are studied. To further reduce the carrier density of twin free Bi2Se3 layers grown on InP(111)B:Fe a series of Bi(2-x)Sb(x)Se3 alloys were grown under comparable growth conditions. This results in a reduction of the carrier density with a minimum in the composition range of about x=0.9-1.0. The Bi(2-x)Sb(x)Te3 alloys exhibit a pn-transition, due to the dominating n-type and p-type point defects in its binary compounds, which is determined to reduce the bulk carrier density enabling the study the TI surface states. This pn-transition plays a significant role in realizing predicted applications and exotic effects, such as the quantum anomalous Hall effect. The magnetic doping of topological insulators with transition metals is studied by incorporating Cr and V in the alloy Bi(2-x)Sb(x)Te3 by codeposition. The preferential incorporation of Cr on group-V sites is confirmed by EDX and XRD, whereas the incorporation of Cr reduces the crystalline quality of the layer. Magnetotransport measurements of the Cr-doped TIs display an anomalous Hall effect confirming the realization of a magnetic TI thin film. The quantum anomalous Hall effect is observed in V-doped Bi(2-x)Sb(x)Te3, where the V-doping results in higher Curie temperatures, as well as higher coercive fields compared to the Cr-doping of the TIs. Moreover the present thesis contributes to the understanding of the role of the substrate concerning the crystalline quality of van der Waals bonded layers, such as the V2VI3 TIs, MoS2 and WoTe2. Furthermore, the fabrication of the thin film TIs Bi(2-x)Sb(x)Te(3-y)Se(y) in high crystalline quality serves as basis to explore the physics of topological insulators.},
  subject      = {Bismutverbindungen},
  language  = {en}
}
@phdthesis{Kessel2016,
  author    = {Kessel, Maximilian},
  title     = {HgTe shells on CdTe nanowires: A low-dimensional topological insulator from crystal growth to quantum transport},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-149069},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {A novel growth method has been developed, allowing for the growth of strained HgTe shells on CdTe nanowires (NWs). The growth of CdTe-HgTe core-shell NWs required high attention in controlling basic parameters like substrate temperature and the intensity of supplied material fluxes. The difficulties in finding optimized growth conditions have been successfully overcome in this work. We found the lateral redistribution of liquid growth seeds with a ZnTe growth start to be crucial to trigger vertical CdTe NW growth. Single crystalline zinc blende CdTe NWs grew, oriented along [111]B. The substrate temperature was the most critical parameter to achieve straight and long wires. In order to adjust it, the growth was monitored by reflection high-energy electron diffraction, which was used for fine tuning of the temperature over time in each growth run individually. For optimized growth conditions, a periodic diffraction pattern allowed for the detailed analysis of atomic arrangement on the surfaces and in the bulk. The ability to do so reflected the high crystal quality and ensemble uniformity of our CdTe NWs. The NW sides were formed by twelve stable, low-index crystalline facets. We observed two types stepped and polar sides, separated by in total six flat and non-polar facets. The high crystalline quality of the cores allowed to grow epitaxial HgTe shells around. We reported on two different heterostructure geometries. In the first one, the CdTe NWs exhibit a closed HgTe shell, while for the second one, the CdTe NWs are overgrown mainly on one side. Scanning electron microscopy and scanning transmission electron microscopy confirmed, that many of the core-shell NWs are single crystalline zinc blende and have a high uniformity. The symmetry of the zinc blende unit cell was reduced by residual lattice strain. We used high-resolution X-ray diffraction to reveal the strain level caused by the small lattice mismatch in the heterostructures. Shear strain has been induced by the stepped hetero-interface, thereby stretching the lattice of the HgTe shell by 0.06 \% along a direction oriented with an angle of 35 ° to the interface. The different heterostructures obtained, were the base for further investigation of quasi-one-dimensional crystallites of HgTe. We therefore developed methods to reliably manipulate, align, localize and contact individual NWs, in order to characterize the charge transport in our samples. Bare CdTe cores were insulating, while the HgTe shells were conducting. At low temperature we found the mean free path of charge carriers to be smaller, but the phase coherence length to be larger than the sample size of several hundred nanometers. We observed universal conductance fluctuations and therefore drew the conclusion, that the trajectories of charge carriers are defined by elastic backscattering at randomly distributed scattering sites. When contacted with superconducting leads, we saw induced superconductivity, multiple Andreev reflections and the associated excess current. Thus, we achieved HgTe/superconductor interfaces with high interfacial transparency. In addition, we reported on the appearance of peaks in differential resistance at Delta/e for HgTe-NW/superconductor and 2*Delta/e for superconductor/HgTe-NW/superconductor junctions, which is possibly related to unconventional pairing at the HgTe/superconductor interface. We noticed that the great advantage of our self-organized growth is the possibility to employ the metallic droplet, formerly seeding the NW growth, as a superconducting contact. The insulating wire cores with a metallic droplet at the tip have been overgrown with HgTe in a fully in-situ process. A very high interface quality was achieved in this case.},
  subject      = {Quecksilbertellurid},
  language  = {en}
}
@phdthesis{Dagvadorj2016,
  author    = {Dagvadorj, Nergui},
  title     = {Improvement of T-cell response against WT1-overexpressing leukemia by newly developed anti-hDEC205-WT1 antibody fusion proteins},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-149098},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Wilms tumor protein 1 (WT1) is a suitable target to develop an immunotherapeutic approach against high risk acute myeloid leukemia (AML), particularly their relapse after allogeneic hematopoietic stem cell transplantation (HSCT). As an intracellular protein traversing between nucleus and cytoplasm, recombinant expression of WT1 is difficult. Therefore, an induction of WT1-specific T-cell responses is mostly based on peptide vaccination as well as dendritic cell (DC) electroporation with mRNA encoding full-length protein to mount WT1-derived peptide variations presented to T cells. Alternatively, the WT1 peptide presentation could be broadened by forcing receptor-mediated endocytosis of DCs. In this study, antibody fusion proteins consisting of an antibody specific to the human DEC205 endocytic receptor and various fragments of WT1 (anti-hDEC205-WT1) were generated for a potential DC-targeted recombinant WT1 vaccine. Anti-hDEC205-WT1 antibody fusion proteins containing full-length or major parts of WT1 were not efficiently expressed and secreted due to their poor solubility and secretory capacity. However, small fragment-containing variants: anti-hDEC205-WT110-35, anti-hDEC205-WT191-138, anti-hDEC205-WT1223-273, and anti-hDEC205-WT1324-371 were obtained in good yields. Since three of these fusion proteins contain the most of the known immunogenic epitopes in their sequences, the anti-hDEC205-WT191-138, anti-hDEC205-WT1223-273, and anti-hDEC205-WT1324-371 were tested for their T-cell stimulatory capacities. Mature monocyte-derived DCs loaded with anti-hDEC205-WT191-138 could induce ex vivo T-cell responses in 12 of 16 blood samples collected from either healthy or HSC transplanted individuals compared to included controls (P < 0.01). Furthermore, these T cells could kill WT1-overexpressing THP-1 leukemia cells in vitro after expansion. In conclusion, alongside proving the difficulty in expression and purification of intracellular WT1 as a vaccine protein, our results from this work introduce an alternative therapeutic vaccine approach to improve an anti-leukemia immune response in the context of allogeneic HSCT and potentially beyond.},
  subject      = {Akute myeloische Leuk{\"a}mie},
  language  = {en}
}
@phdthesis{Sickel2016,
  author    = {Sickel, Wiebke},
  title     = {High-throughput biodiversity assessment - Powers and limitations of meta-barcoding},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144573},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Traditional species identification based on morphological characters is laborious and requires expert knowledge. It is further complicated in the case of species assemblages or degraded and processed material. DNA-barcoding, species identification based on genetic data, has become a suitable alternative, yet species assemblages are still difficult to study. In the past decade meta-barcoding has widely been adopted for the study of species communities, due to technological advances in modern sequencing platforms and because manual separation of individual specimen is not required. Here, meta-barcoding is put into context and applied to the study of bee-collected pollen as well as bacterial communities. These studies provide the basis for a critical evaluation of the powers and limitations of meta-barcoding. Advantages identified include species identification without the need for expert knowledge as well as the high throughput of samples and sequences. In microbiology, meta-barcoding can facilitate directed cultivation of taxa of interest identified with meta-barcoding data. Disadvantages include insufficient species resolution due to short read lengths and incomplete reference databases, as well as limitations in abundance estimation of taxa and functional profiling. Despite these, meta-barcoding is a powerful method for the analysis of species communities and holds high potential especially for automated biomonitoring.},
  subject      = {Biodiversit{\"a}t},
  language  = {en}
}
@phdthesis{Sawatzky2016,
  author    = {Sawatzky, Edgar},
  title     = {Design und Synthese selektiver Butyrylcholinesterase (BChE) Inhibitoren zur Entwicklung von Radiopharmazeutika zur Erforschung der Alzheimer Erkrankung},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144037},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Although the physiological roles of BChE are not yet determined to date, the importance of this enzyme is continuously increasing as it was found to be associated with several disorders like diabetes mellitus type 2, cardiovascular diseases, obesity and especially with Alzheimer's disease (AD). In consequence, for investigations of BChE's pathological role in these diseases and to find new medication strategies, the development of selective and potent inhibitors is necessary. For this purpose, the current work progresses in five chapters on the exploration of the chemical, physical and biochemical properties of tetrahydroquinazoline based carbamates which were previously reported to be selective BChE inhibitors with potency in the low nanomolar range. 1) A Novel Way to Radiolabel Human Butyrylcholinesterase for PET through Irreversible Transfer of the Radiolabeled Moiety: PET-radiotracers represent an innovative tool to determine the distribution and the expression of a biological target in vivo. BChE lacks to a large degree of such tracers with a few exceptions. In this work, methods were developed to incorporate the radioisotopes 11C and 18F into the carbamate moiety of an tetrahydroquinazoline based inhibitor. In contrast to reversibly acting PET-probes, the described radiotracers were proven by kinetic studies to transfer the radioisotope covalently onto the active site of BChE, thus labeling the enzyme directly and permanently. 2) Discovery of Highly Selective and Nanomolar Carbamate-Based Butyrylcholinesterase Inhibitors by Rational Investigation into Their Inhibition Mode: To investigate the role of the tetrahydroquinazoline carrier scaffold on BChE inhibition, carbamate based inhibitors were synthesized. These compounds were successively used to perform kinetic investigations to determine their inhibition mode. Based on these data, a plausible binding model was postulated explaining the influence of the tetrahydroquinazoline carrier scaffold for binding at BChE's active site just before carbamate transfer takes place. Additionally, these compounds feature neuroprotective properties and prevent oxidative stress induced cell death in their carbamate form as well as after the release of the tetrahydroquinazoline carrier scaffold. 3) Dual Addressing of Butyrylcholinesterase by Targeting the Catalytic Active Site (CAS) and the Peripheral Anionic Site (PAS): Compounds which are dual-targeting the CAS and the PAS of BChE are the most potent and selective BChE inhibitors to date with inhibition values in the picomolar range. In this work, a strategy is described how to turn tetrahydroquinazoline based carbamates into dual binding BChE inhibitors. These inhibitors feature a carbamate moiety which is covalently transferred onto the CAS of BChE, and in addition provide a second pharmacophore connected via a linker to the carbamate moiety which is proposed to target the PAS. Preliminary results reveal a high tolerance of BChE towards different linker lengths without decrease in affinity. 4) Investigation into Selective Debenzylation and Ring Cleavage of Quinazoline based Heterocycles: The tetrahydroquinazoline system is well investigated in terms of its synthesis and its selective oxidation. To explore the reactivity of this system, a tetracyclic tetrahydroquinazoline was exposed to common reduction agents. These experiments revealed a high sensitivity of the tetrahydroquinazoline core towards several reduction conditions 5) Experimental and Theoretical Investigation into the Stability of Cyclic Aminals: Tetrahydroquinazolines are known to degrade in acidic media through hydrolysis of their aminal system; but literature is lacking of a systematic investigation into this behavior. Therefore, different tetrahydroquinazolines were synthesized and exposed to phosphate buffered systems with defined pH-values. A clear increase of the hydrolysis rate of the aminal system was determined in dependency of an increasing acidic media. Computational studies predicted and experimental studies proved that hydrolysis takes place in an acidic environment while the condensation of this system is preferred in neutral or basic aqueous media.},
  subject      = {Cholinesterase},
  language  = {en}
}
@phdthesis{Bahnik2016,
  author    = {Bahn{\´i}k, Štěp{\´a}n},
  title     = {Processing fluency and judgment},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144656},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {To simplify a judgment, people often base it on easily accessible information. One cue that is usually readily available is processing fluency - a metacognitive feeling of ease of cognitive processing. Consequently, processing fluency is used as a cue for many different types of judgment, such as judgment of truth, confidence, and novelty. The present work describes results of three studies investigating various aspects of processing fluency effects on judgment. Processing fluency has been sometimes equated with speed of a cognitive process. Therefore, response times have been used for evaluation of processing fluency. However, response times in experimental tasks often do not encompass only the time needed for a given process, but also the time needed for a decision based on the resulting information. The study described in Chapter II uses a novel experimental method that enables separation of reading and decision times. The results show that people make a decision about liking of pseudowords faster when the pseudowords are hard-to-pronounce (i.e., disfluent) than when they are moderate in pronounceability. This suggests that response times cannot be used as a proxy for processing fluency when they include the time needed to make a decision. One of the studies of judgmental effects of processing fluency showed that food additives with easier pronounceable names are judged to be less harmful than those with hard-to-pronounce names. While people encounter food additives that are safe more often, this environmental association may be in the opposite direction for some categories of objects. For example, people are more likely to see names of especially dangerous criminals in the news. Chapter III describes a study which initially tested whether the fluency-safety association may be in the opposite direction for some categories of objects as a consequence of this selective exposure to especially dangerous exemplars. The results did not show support for this hypothesis. Furthermore, subsequent studies suggest that the previously found association between fluency and safety is replicable with the original stimuli used in the previous research, but not with newly constructed stimuli. Chapter IV describes a study which applied a finding from the processing fluency literature to a positive psychology exercise in order to increase its effectiveness. Namely, the experiment manipulated the number of good things that participants listed daily for two weeks as part of the exercise. While listing more things was considered harder, the number of things listed each day had no effect on effectiveness of the exercise.},
  subject      = {Urteilen},
  language  = {en}
}
@phdthesis{Koepke2016,
  author    = {Koepke, Robin},
  title     = {Capital Flows and Financial Stability in Emerging Markets: the Role of U.S. Monetary Policy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-140524},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Die Dissertation besch{\"a}ftigt sich mit den Triebkr{\"a}ften der internationalen Kapitalstr{\"o}me in Schwellenl{\"a}nder sowie den Determinanten von Krisen in Schwellenl{\"a}ndern. Besonderes Augenmerk liegt dabei auf der Rolle der Geldpolitik in den USA. Die Dissertation besteht aus drei eigenst{\"a}ndigen Kapiteln. Kapitel 1 nimmt eine Bestandsaufnahme der umfangreichen empirischen Literatur zu den Triebkr{\"a}ften von Kapitalstr{\"o}men in Schwellenl{\"a}nder vor. Die empirische Evidenz hinsichtlich dieser Triebkr{\"a}fte ist entlang mehrer Dimensionen strukturiert. So werden die Triebkr{\"a}fte entsprechend des etablierten Paradigmas eingeordnet, nachdem zwischen externen Faktoren (z.B. US-Geldpolitik) und internen Faktoren (z.B. Wachstum in Schwellenl{\"a}ndern) unterschieden wird (Calvo et al. 1993). Eine umfassende Auswertung der empirischen Literatur zeigt, dass externe Faktoren Portfolioinvestitionen am meisten beeinflussen, gefolgt von Zufl{\"u}ssen von Banken. F{\"u}r Direktinvestitionen hingegen ist die empirische Evidenz hinsichtlich einer Reihe externer Faktoren nicht eindeutig. Interne Faktoren sind f{\"u}r alle drei Arten von Kapitalstr{\"o}men von erheblicher Bedeutung, insbesondere f{\"u}r Zufl{\"u}sse von Banken. Dar{\"u}ber hinaus unterscheidet die vorliegende Studie zwischen zyklischen und strukturellen Faktoren, die Kapitalstr{\"o}me beeinflussen. Eine historische Analyse deutet darauf hin, dass die Literatur die Bedeutung von zyklischen Faktoren zulasten l{\"a}ngerfristiger struktureller Trends {\"u}berbewertet hat. Kapitel 2 nimmt eine empirische Analyse der Triebkr{\"a}fte von Portfolioinvestitionen in Schwellenl{\"a}ndern vor, mit besonderem Fokus auf die Rolle der Geldpolitik der US-Zentralbank. Dabei werden zwei unterschiedliche Datens{\"a}tze zu hochfrequenten Portfolioinvestitionen mit Hilfe eines Zeitreihenmodells analysiert. Die empirische Analyse zeigt, dass Portfolioinvestitionen erheblich vom {\"U}berraschungsmoment der US-Geldpolitik getrieben werden. Wenn Marktteilnehmer ihre Erwartungen bez{\"u}glich des k{\"u}nftigen Pfades der Leitzinsen ver{\"a}ndern, dann hat dies direkte Auswirkungen auf das Verhalten von Portfolio-Kapitalstr{\"o}men. Eine Verschiebung der erwarteten Leitzinsen nach unten [nach oben] erh{\"o}ht [vermindert] die Portfoliozufl{\"u}sse in Schwellenl{\"a}nder. Dieses Ergebnis legt eine neue Interpretation der Rolle der US-Geldpolitik nahe. In der gegenw{\"a}rtigen Literatur besteht die zentrale {\"U}berzeugung hinsichtlich der Rolle der US-Geldpolitik darin, dass sich eine Erh{\"o}hung der Leitzinsen negativ auf Kapitalfl{\"u}sse in Schwellenl{\"a}nder auswirkt, unabh{\"a}ngig davon wie schnell die Leitzinsen erh{\"o}ht werden (z.B. Fernandez-Arias 1996). Die Ergebnisse der vorliegenden Arbeit hingegen deuten darauf hin, dass eine Straffung der US-Geldpolitik sich nicht notwendigerweise negativ auf Portfolioinvestitionen auswirkt. Negative Effekte bleiben insbesondere dann aus, wenn eine Zinserh{\"o}hung von den Marktteilnehmern bereits erwartetet und somit eingepreist war. Eine Erh{\"o}hung der Leitzinsen kann sogar mit positiven Effekten auf Kapitalstr{\"o}me einhergehen, n{\"a}mlich dann, wenn sie von einer Abw{\"a}rtsbewegung im erwarteten Pfad der Leitzinsen begleitet ist (zum Beispiel weil die Zentralbank signalisiert, dass weitere Zinserh{\"o}hungen nicht zu erwarten sind). Umgekehrt kann die US-Geldpolitik Portfolioinvestitionen auch ohne eine Erh{\"o}hung der Leitzinsen beeintr{\"a}chtigen, n{\"a}mlich dann, wenn Marktteilnehmer ihre Erwartungen hinsichtlich der k{\"u}nftigen Leitzinsen nach oben revidieren. Kapitel 3 untersucht die Rolle der US-Geldpolitik hinsichtlich ihres Einflusses auf das Auftreten von Krisen in Schwellenl{\"a}ndern. Es werden ein negativ-binomisches Z{\"a}hlmodell und ein Panel-Logitmodell {\"o}konometrisch gesch{\"a}tzt, um die Determinanten von W{\"a}hrungskrisen, Bankenkrisen und Staatsbankrotten in 27 Schwellenl{\"a}ndern zu analysieren. Die Sch{\"a}tzergebnisse deuten darauf hin, dass die Wahrscheinlichkeit von Krisen wesentlich h{\"o}her ist, (1) wenn die US-Leitzinsen {\"u}ber ihrem nat{\"u}rlichen Niveau liegen, (2) w{\"a}hrend Zinsanhebungszyklen, und (3) wenn Marktteilnehmer von Signalen {\"u}berrascht werden, dass die US-Zentralbank die Leitzinsen schneller als erwartet anheben wird. Diese Ergebnisse stehen im Gegensatz zur bestehenden Literatur, die interne Faktoren in Schwellenl{\"a}ndern als die dominante Ursache von Krisen ansieht (z.B. Gourinchas und Obstfeld 2012). Die Ergebnisse dieser Studie weisen auch auf ein erh{\"o}htes Risiko von Krisen in Schwellenl{\"a}ndern in den kommenden Jahren hin, wenn die US-Zentralbank wie erwartet die Leitzinsen weiterhin graduell anheben wird.},
  subject      = {Internationale Kapitalbewegung},
  language  = {en}
}
@phdthesis{MuellerLeisse2016,
  author    = {M{\"u}ller-Leisse, Johanna},
  title     = {Influence of myeloid-derived suppressor cells and neutrophil granulocytes on natural killer cell homeostasis and function},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-140734},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Polymorphonuclear neutrophils (PMNs) are phagocytic cells of the innate immune system that efficiently kill bacteria. However, they also have regulatory effects on other immune cells and contribute to immunosuppression in cancer, which worsens the outcome. In particular, this has been demonstrated for a subset of granulocytic cells called myeloid- derived suppressor cells (MDSCs), but its distinction from PMNs is controversial. Most authors have explored the suppressive effects of MDSCs on T cells, but recent data suggest that NK cells are also affected. NK cells are crucial for the combat of tumor cells, in particular leukemic cells. There is hardly data available on the interaction between NK cells and suppressive granulocytic cells. Therefore, the aim of this thesis was to explore the effects of MDSCs and PMNs on the NK cell function against the leukemia cell line K562. In co-culture experiments, I demonstrate that granulocytic MDSCs and PMNs had similar effects on NK cell function and homeostasis. On the one hand, they positively influenced the survival and maturation of NK cells. On the other, they inhibited the activation, cytotoxicity and cytokine production of NK cells, both IFNγ and TNFα, in response to K562 target cells. Furthermore, I show a down-regulation of the activating receptor NKp30 on NK cells in the presence of MDSCs or PMNs, which may form part of the underlying suppressive mechanisms. However, there is also evidence for the involvement of other molecules. Further investigations are needed to confirm a relevant suppression of NK cells by granulocytic cells in cancer patients, and to identify therapeutic targets. The recognition that regular PMNs have similar effects on NK cells as MDSCs could simplify future experiments, since MDSCs are heterogeneous and laborious to isolate and identify. NKcells and granulocytes are among the first immune cells to reconstitute after hematopoietic stem cell transplantation, and NK cells may be particularly exposed to suppressive effects of granulocytes this scenario. Modulating these suppressive effects of granulocytes on NK cells therapeutically may yield a better NK cell function and an improved cancer prognosis. },
  subject      = {Nat{\"u}rliche Killerzelle},
  language  = {en}
}
@phdthesis{Blaettner2016,
  author    = {Bl{\"a}ttner, Sebastian},
  title     = {The role of the non-ribosomal peptide synthetase AusAB and its product phevalin in intracellular virulence of Staphylococcus aureus},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146662},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Staphylococcus aureus is a prevalent commensal bacterium which represents one of the leading causes in health care-associated bacterial infections worldwide and can cause a variety of different diseases ranging from simple abscesses to severe and life threatening infections including pneumonia, osteomyelitis and sepsis. In recent times multi-resistant strains have emerged, causing severe problems in nosocomial as well as community-acquired (CA) infection settings, especially in the United States (USA). Therefore S. aureus has been termed as a superbug by the WHO, underlining the severe health risk originating from it. Today, infections in the USA are dominated by S. aureus genotypes which are classified as USA300 and USA400, respectively. Strains of genotype USA300 are responsible for about 70\% of the CA infections. The molecular mechanisms which render S. aureus such an effective pathogen are still not understood in its entirety. For decades S. aureus was thought to be a strictly extracellular pathogen relying on pore-forming toxins like α-hemolysin to damage human cells and tissue. Only recently it has been shown that S. aureus can enter non-professional phagocytes, using adhesins like the fibronectin-binding proteins which mediate an endocytotic uptake into the host cells. The bacteria are consequently localized to endosomes, where the degradation of enclosed bacterial cells through phagosome maturation would eventually occur. S. aureus can avoid degradation, and translocate to the cellular cytoplasm, where it can replicate. The ability to cause this so-called phagosomal escape has mainly been attributed to a family of amphiphilic peptides called phenol soluble modulins (PSMs), but as studies have shown, they are not sufficient. In this work I used a transposon mutant library in combination with automated fluorescence microscopy to screen for genes involved in the phagosomal escape process and intracellular survival of S. aureus. I thereby identified a number of genes, including a non-ribosomal peptide synthetase (NRPS). The NRPS, encoded by the genes ausA and ausB, produces two types of small peptides, phevalin and tyrvalin. Mutations in the ausAB genes lead to a drastic decrease in phagosomal escape rates in epithelial cells, which were readily restored by genetic complementation in trans as well as by supplementation of synthetic phevalin. In leukocytes, phevalin interferes with calcium fluxes and activation of neutrophils and promotes cytotoxicity of intracellular bacteria in both, macrophages and neutrophils. Further ausAB is involved in survival and virulence of the bacterium during mouse lung pneumoniae. The here presented data demonstrates the contribution of the bacterial cyclic dipeptide phevalin to S. aureus virulence and suggests, that phevalin directly acts on a host cell target to promote cytotoxicity of intracellular bacteria.},
  subject      = {Staphylococcus aureus},
  language  = {en}
}
@phdthesis{Fella2016,
  author    = {Fella, Christian},
  title     = {High-Resolution X-ray Imaging based on a Liquid-Metal-Jet-Source with and without X-ray Optics},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145938},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {With increasing miniaturization in industry and medical technology, non-destructive testing techniques are an area of everincreasing importance. In this framework, X-ray microscopy offers an efficient tool for the analysis, understanding and quality assurance of microscopic species, in particular as it allows reconstructing three-dimensional data sets of the whole sample's volumevia computed tomography (CT). The following thesis describes the conceptualization, design, construction and characterization of a compact laboratory-based X-ray microscope in the hard X-ray regime around 9 keV, corresponding to a wavelength of 0.134 nm. Hereby, the main focus is on the optimization of resolution and contrast at relatively short exposure times. For this, a novel liquid-metal-jet anode source is the basis. Such only recently commercially available X-ray source reaches a higher brightness than other conventional laboratory sources, i.e. the number of emitted photons (X-ray quanta) per area and solid angle is exceptionally high. This is important in order to reach low exposure times. The reason for such high brightness is the usage of the rapidly renewing anode out of liquid metal which enables an effective dissipation of heat, normally limiting the creation of high intensities on a small area. In order to cover a broad range of different samples, the microscope can be operated in two modes. In the "micro-CT mode", small pixels are realized with a crystal-scintillator and an optical microscope via shadow projection geometry. Therefore, the resolution is limited by the emitted wavelength of the scintillator, as well as the blurring of the screen. However, samples in the millimeter range can be scanned routinely with low exposure times. Additionally, this mode is optimized with respect to in-line phase contrast, where edges of an object are enhanced and thus better visible. In the second "nano-CT mode", a higher resolution can be reached via X-ray lenses. However, their production process is due to the physical properties of the hard X-ray range - namely high absorption and low diffraction - extremely difficult, leading typically to low performances. In combination with a low brightness, this leads to long exposure times and high requirements in terms of stability, which is one of the key problems of laboratory-based X-ray microscopy. With the here-developed setup and the high brightness of its source, structures down to 150 nm are resolved at moderate exposure times (several minutes per image) and nano-CTs can be obtained.},
  subject      = {computed tomography},
  language  = {en}
}
@phdthesis{Batsching2016,
  author    = {Batsching, Sophie Johanna},
  title     = {Behavior under uncontrollable stress in \(Drosophila\) \(melanogaster\) - Learned Helplessness revisited},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145416},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In order to select the appropriate behavior, it is important to choose the right behavior at the right time out of many options. It still remains unclear nowadays how exactly this is managed. To address this question, I expose flies (Drosophila melanogaster) to uncontrollable stress to study their behavior under restrictive circumstances by using the so-called shock box. Exposing animals to uncontrollable stress may have an impact on subsequent behavior and can last for some time. The animal learns that whatever it does, it cannot change the situation and therefore can develop something called learned helplessness. The term was first conceptualized by two American psychologists Maier and Seligman (1967), who discovered this phenomenon while doing experiments with dogs. They found out that dogs which are exposed to inescapable stress, later fail in a learning task ('shuttle box'). In this work the walking patterns of three different types of experimental flies, walking in a small dark chamber, were evaluated. Using the triadic design (Seligman and Maier, 1967), flies were either exposed to electric shock randomly (yoked), could turn it off by being active (master) or did not receive punishment at all (control). Master flies were shocked whenever they sat for more than 0.9 seconds. At the same time yoked flies received a shock as well independent of what they were doing, to ensure the same amount of shocks received and to create random punishment pattern for the yoked group. With this so-called no-idleness paradigm flies were conditioned either 10 minutes, which resulted in a short (3 minutes) after-effect, or 20 minutes that turned out to be more stable (10 minutes). In a second part, the behavior during the 20 minute conditioning and a 10 minutes post-test was described in detail. Female flies of the yoked group developed lower activity levels, longer pauses and walked more slowly than master and control flies during conditioning. In the time after the shocks while still in the box, the yoked flies also reduced the frequency and duration of walking bouts as well as their walking speed. Additionally, they took more time to resume walking after the onset of an electric shock than master flies (escape latency) and turned out to make less pauses lasting between 1-1.5 seconds which supports the finding concerning the escape latency. Male flies, tested under the same conditions, showed a slightly weaker after-effect regarding the difference between master and yoked during conditioning and post-test when compared to female flies. When comparing the 20 minutes conditioning with subsequent 10 minutes test in the heat and the shock box in parallel, one finds the same effect: Flies which do not have control over the shocks, lower their activity, make less but longer pauses and walk more slowly than their respective master flies. Despite the similar effect of heat and shock on the flies, some differences between the devices occurred, which can partly be explained by different humidity conditions as well as by different surfaces within the chambers. When the control over the shocks is given back to the yoked flies, it takes them about seven minutes to realize it. One could also show that dopamine levels in the brain were reduced in comparison to flies which did not receive shocks. Yoked flies also were impaired in a place learning task (place learning) and their reaction to light (exit from the box towards the light) directly after conditioning. After characterizing the walking behavior in the chambers, the study deals with the question whether the effects observed in the chambers transfer to different environments. In free walk they only differed from flies which did not receive electric shocks and no effect of uncontrollability was transferred to courtship behavior. Handling as the cause could be excluded. Since handling could be exclude to be the cause of losing the effect, I assumed that the behavior shown in the boxes are context depend. Not only were the after-effects of inescapable shock subject of the current research also the impact of the rearing situation on the response to electric shock was investigated in the present study. Flies which grew up in a single-reared situation turned out to be less affected by inescapable stress in both sexes. In the next part, the first steps to unravel the neuronal underpinning were taken. A mutant - fumin - which is defective in the dopamine re-uptake transporter showed less reaction to inescapable foot shocks, while a mutant for the gene which encodes an adenylate cyclase (rutabaga2080) resulted in a good score during conditioning, but showed no stable after-effect. Downregulating the expression of the adenylate cyclase gene (rutabaga) in different parts of the mushroom bodies showed, that rutabaga is necessary in the α'β'-lobes for expressing the differences between master and yoked flies in the no-idleness paradigm. The study further confirmed previous findings, that rutabaga is needed in operant but not in classical conditioning. As a result, the study could show that not the stimulus itself causes the state of uncontrollability but the fact that the fly learned that it was not in control of the stimulus. This state turned out to be context and time dependent.},
  subject      = {Taufliege},
  language  = {en}
}
@phdthesis{Hirth2016,
  author    = {Hirth, Matthias Johannes Wilhem},
  title     = {Modeling Crowdsourcing Platforms - A Use-Case Driven Approach},
  issn      = {1432-8801},
  doi       = {10.25972/OPUS-14072},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-140726},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Computer systems have replaced human work-force in many parts of everyday life, but there still exists a large number of tasks that cannot be automated, yet. This also includes tasks, which we consider to be rather simple like the categorization of image content or subjective ratings. Traditionally, these tasks have been completed by designated employees or outsourced to specialized companies. However, recently the crowdsourcing paradigm is more and more applied to complete such human-labor intensive tasks. Crowdsourcing aims at leveraging the huge number of Internet users all around the globe, which form a potentially highly available, low-cost, and easy accessible work-force. To enable the distribution of work on a global scale, new web-based services emerged, so called crowdsourcing platforms, that act as mediator between employers posting tasks and workers completing tasks. However, the crowdsourcing approach, especially the large anonymous worker crowd, results in two types of challenges. On the one hand, there are technical challenges like the dimensioning of crowdsourcing platform infrastructure or the interconnection of crowdsourcing platforms and machine clouds to build hybrid services. On the other hand, there are conceptual challenges like identifying reliable workers or migrating traditional off-line work to the crowdsourcing environment. To tackle these challenges, this monograph analyzes and models current crowdsourcing systems to optimize crowdsourcing workflows and the underlying infrastructure. First, a categorization of crowdsourcing tasks and platforms is developed to derive generalizable properties. Based on this categorization and an exemplary analysis of a commercial crowdsourcing platform, models for different aspects of crowdsourcing platforms and crowdsourcing mechanisms are developed. A special focus is put on quality assurance mechanisms for crowdsourcing tasks, where the models are used to assess the suitability and costs of existing approaches for different types of tasks. Further, a novel quality assurance mechanism solely based on user-interactions is proposed and its feasibility is shown. The findings from the analysis of existing platforms, the derived models, and the developed quality assurance mechanisms are finally used to derive best practices for two crowdsourcing use-cases, crowdsourcing-based network measurements and crowdsourcing-based subjective user studies. These two exemplary use-cases cover aspects typical for a large range of crowdsourcing tasks and illustrated the potential benefits, but also resulting challenges when using crowdsourcing. With the ongoing digitalization and globalization of the labor markets, the crowdsourcing paradigm is expected to gain even more importance in the next years. This is already evident in the currently new emerging fields of crowdsourcing, like enterprise crowdsourcing or mobile crowdsourcing. The models developed in the monograph enable platform providers to optimize their current systems and employers to optimize their workflows to increase their commercial success. Moreover, the results help to improve the general understanding of crowdsourcing systems, a key for identifying necessary adaptions and future improvements.},
  subject      = {Open Innovation},
  language  = {en}
}
@phdthesis{Stuckensen2016,
  author    = {Stuckensen, Kai},
  title     = {Fabrication of hierarchical cell carrier matrices for tissue regeneration by directional solidification},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145510},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The key hypothesis of this work represented the question, if mimicking the zonal composition and structural porosity of musculoskeletal tissues influences invading cells positively and leads to advantageous results for tissue engineering. Conventional approaches in tissue engineering are limited in producing monolithic "scaffolds" that provide locally variating biological key signals and pore architectures, imitating the alignment of collagenous fibres in bone and cartilage tissues, respectively. In order to fill this gap in available tissue engineering strategies, a new fabrication technique was evolved for the production of scaffolds to validate the hypothesis. Therefore, a new solidification based platform procedure was developed. This process comprises the directional solidification of multiple flowable precursors that are "cryostructured" to prepare a controlled anisotropic pore structure. Porous scaffolds are attained through ice crystal removal by lyophilisation. Optionally, electrostatic spinning of polymers may be applied to provide an external mesh on top or around the scaffolds. A consolidation step generates monolithic matrices from multi zonal structures. To serve as matrix for tissue engineering approaches or direct implantation as medical device, the scaffold is sterilized. An Adjustable Cryostructuring Device (ACD) was successively developed; individual parts were conceptualized by computer aided design (CAD) and assembled. During optimisation, a significant performance improvement of the ACDs accessible external temperature gradient was achieved, from (1.3 ± 0.1) K/mm to (9.0 ± 0.1) K/mm. Additionally, four different configurations of the device were made available that enabled the directional solidification of collagenous precursors in a highly controlled manner with various sample sizes and shapes. By using alginate as a model substance the process was systematically evaluated. Cryostructuring diagraphs were analysed yielding solidification parameters, which were associated to pore sizes and alignments that were determined by image processing. Thereby, a precise control over pore size and alignment through electrical regulation of the ACD could be demonstrated. To obtain tissue mimetic scaffolds for the musculoskeletal system, collagens and calcium phosphates had to be prepared to serve as raw materials. Extraction and purification protocols were established to generate collagen I and collagen II, while the calcium phosphates brushite and hydroxyapatite were produced by precipitation reactions. Besides the successive augmentation of the ACD also an optimization of the processing steps was crucial. Firstly, the concentrations and the individual behaviour of respective precursor components had to be screened. Together with the insights gained by videographic examination of solidifying collagen solutions, essential knowledge was gained that facilitated the production of more complex scaffolds. Phenomena of ice crystal growth during cryostructuring were discussed. By evolutionary steps, a cryostructuring of multi-layered precursors with consecutive anisotropic pores could be achieved and successfully transferred from alginate to collagenous precursors. Finally, very smooth interfaces that were hardly detectable by scanning electron microscopy (SEM) could be attained. For the used collagenous systems, a dependency relation between adjustable processing parameters and different resulting solidification morphologies was created. Dehydrothermal-, diisocyanate-, and carbodiimide- based cross linking methods were evaluated, whereby the "zero length" cross linking by carbodiimide was found to be most suitable. Afterwards, a formulation for the cross linking solution was elaborated, which generated favourable outcomes by application inside a reduced pressure apparatus. As a consequence, a pore collapse during wet chemical cross linking could be avoided. Complex monolithic scaffolds featuring continuous pores were fabricated that mimicked structure and respective composition of different areas of native tissues by the presence of biochemical key stimulants. At first, three types of bone scaffolds were produced from collagen I and hydroxyapatite with appropriate sizes to fit critical sized defects in rat femurs. They either featured an isotropic or anisotropic porosity and partly also contained glycosaminoglycans (GAGs). Furthermore, meniscus scaffolds were prepared by processing two precursors with biomimetic contents of collagen I, collagen II and GAGs. Here, the pore structures were created under boundary conditions, which allowed an ice crystal growth that was nearly orthogonal to the external temperature gradient. Thereby, the preferential alignment of collagen fibres in the natural meniscus tissue could be mimicked. Those scaffolds owned appropriate sizes for cell culture in well plates or even an authentic meniscus shape and size. Finally, osteochondral scaffolds, sized to either fit well plates or perfusion reactors for cell culture, were fabricated to mimic the composition of subchondral bone and different cartilage zones. Collagen I and the resorbable calcium phosphate brushite were used for the subchondral zone, whereas the cartilage zones were composed out of collagen I, collagen II and tissue mimetic contents of GAGs. The pore structure corresponded to the one that is dominating the volume of natural osteochondral tissue. Energy dispersive X-ray spectroscopy (EDX) and SEM were used to analyse the composition and pore structure of the individual scaffold zones, respectively. The cross section pore diameters were determined to (65 ± 25) µm, (88 ± 35) µm and(93 ± 42) µm for the anisotropic, the isotropic and GAG containing isotropic bone scaffolds. Furthermore, the meniscus scaffolds showed pore diameters of (93 ± 21) µm in the inner meniscus zone and (248 ± 63) µm inside the outer meniscus zone. Pore sizes of (82 ± 25) µm, (83 ± 29) µm and (85 ± 39) µm were present inside the subchondral, the lower chondral and the upper chondral zone of osteochondral scaffolds. Depending on the fabrication parameters, the respective scaffold zones were also found to feature a specific micro- and nanostructure at their inner surfaces. Degradation studies were carried out under physiological conditions and resulted in a mean mass loss of (0.52 ± 0.13) \%, (1.56 ± 0.10) \% and (0.80 ± 0.10) \% per day for bone, meniscus and osteochondral scaffolds, respectively. Rheological measurements were used to determine the viscosity changes upon cooling of different precursors. Micro computer tomography (µ-CT) investigations were applied to characterize the 3D microstructure of osteochondral scaffolds. To obtain an osteochondral scaffold with four zones of tissue mimetic microstructure alignment, a poly (D, L-lactide-co-glycolide) mesh was deposited on the upper chondral zone by electrostatic spinning. In case of the bone scaffolds, the retention / release capacity of bone morphogenetic protein 2 (BMP-2) was evaluated by an enzyme linked immunosorbent assay (ELISA). Due to the high presence of attractive BMP binding sites, only less than 0.1 \% of the initially loaded cytokine was released. The suitability of combining the cryostructuring process with 3D powder printed calcium phosphate substrates was evaluated with osteochondral scaffolds, but did not appear to yield more preferable results than the non-combined approach. A new custom build confined compression setup was elaborated together with a suitable evaluation procedure for the mechanical characterisation under physiological conditions. For bone and cartilage scaffolds, apparent elastic moduli of (37.6 ± 6.9) kPa and (3.14 ± 0.85) kPa were measured. A similar behaviour of the scaffolds to natural cartilage and bone tissue was demonstrated in terms of elastic energy storage. Under physiological frequencies, less than 1.0 \% and 0.8 \% of the exerted energy was lost for bone and cartilage scaffolds, respectively. With average relaxation times of (0.613 ± 0.040) sec and (0.815 ± 0.077) sec, measured for the cartilage and bone scaffolds, they respond four orders of magnitude faster than the native tissues. Additionally, all kinds of produced scaffolds were able to withstand cyclic compression at un-physiological frequencies as high as 20 Hz without a loss in structural integrity. With the presented new method, scaffolds could be fabricated whose extent in mimicking of native tissues exceeded the one of scaffolds producible by state of the art methods. This allowed a testing of the key hypothesis: The biological evaluation of an anisotropic pore structure in vivo revealed a higher functionality of immigrated cells and led finally to advantageous healing outcomes. Moreover, the mimicking of local compositions in combination with a consecutive anisotropic porosity that approaches native tissue structures could be demonstrated to induce zone specific matrix remodelling in stem cells in vitro. Additionally, clues for a zone specific chondrogenic stem cell differentiation were attained without the supplementation of growth factors. Thereby, the hypothesis that an increased approximation of the hierarchically compositional and structurally anisotropic properties of musculoskeletal tissues would lead to an improved cellular response and a better healing quality, could be confirmed. With a special focus on cell free in situ tissue engineering approaches, the insights gained within this thesis may be directly transferred to clinical regenerative therapies.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Schmitz2016,
  author    = {Schmitz, Michael},
  title     = {Functional hydrophilic polymers for chemoselective coupling},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145629},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Chemoselective poly(oxazolines) (POx) and poly[(oligo ethylene glycol) acrylates] were synthesized. An initiator was produced for the preparation of poly(oxazoline)s capable of participating in click chemistry reactions which allows the functionalization of the polymer at the α terminus which was confirmed by 1H NMR spectroscopy. The initiator was used for the polymerization of hydrophilic 2 methyl 2 oxazoline (MeOx), whereby chemoselective, alkyne functionalized polymers could be prepared for Cu-catalyzed azide-alkyne cycloaddition. The desired molecular weight could be achieved through the living, ring opening cationic polymerization and was confirmed by 1H NMR, SEC and MALDI ToF measurements. Polymers were terminated with piperidine if no further functionalization was needed, or with an ester derivate for enabling amine attachment in a subsequent step. In addition, polymers were functionalized by termination with NaN3 in order to provide the counterpart to the azide-alkyne reaction. IR spectroscopy was suitable for the azide detection. The coupling of polymers showed the reactivity and could be confirmed by SEC, 1H NMR and IR spectroscopy. The composition of cysteine functionalized POx was completed by thiol-ene chemistry. Since the commercially available iso 2 propyl 2 oxazoline is not available for the cationic polymerization, 2 butenyl and 2 decenyl 2 oxazoline (ButenOx and DecenOx) were first prepared. The synthesis of both copolymers, based on MeOx could be confirmed by 1H NMR as well as with SEC, whereby narrow distributions with dispersities of 1.06 could be achieved. The cysteine functionalization of the copolymers was enabled by the creation of a thiazolidine component which could be synthesized by acetal and formyl protection of cysteine and subsequent functionalization with a thiol. The component enabled the reaction with a polymer by thiol-ene reaction which was started by the addition of dimethoxyphenyl-acetophenone and was catalyzed by irradiation with UV light. Both copolymers, with a shorter (polymers with BuenOx) and longer (polymers with DecenOx) hydrophobic sidechain could be functionalized. 1H NMR spectroscopic analysis showed a quantitative reaction with the thiazolidine derivate. After deprotection by acidic workup the desired, cysteine functionalized polymer could be isolated. Quantification of cysteine functions was ensured by a modified TNBSA assay, whereby the thiols were first oxidized in order to confirm an independent measurement of amine functions. Both, the TNBSA assay as well as the NMR measurement showed the desired number of cysteine residues. The cytotoxicity of functionalized polymers with different compositions was tested by a luminescent cell viability assay (LCVA). Both, the amount of cysteine functions (5-10\%) in the copolymers as well as the length of the hydrophobic side chain were varied. All polymers did not show cytotoxicity up to concentrations of 10 mg∙mL-1. The cell activity and cell numbers only decreased below 50\% and 20\% respectively, when copolymers with 5\% cysteine and longer sidechains were measured, which was attributed to a contamination of the sample itself. The cooperation partner performed Native Chemical Ligation (NCL) with model peptides and purified the products by HPLC. A sterically non demanding peptide was synthesized, consisting of an aromatic amino acid and four glycine units. The aromatic unit was used for the quantification of the polymer-peptide conjugate in the 1H NMR spectroscopy. A polymer having five cysteine side chains has been fully implemented by NCL to a conjugate of one polymer with five peptides. A sterically more demanding peptide was additionally used and MALDI ToF measurements confirmed the successful conjugation. Furthermore the cysteine functionalized polymer was used for nanogel synthesis. The thiol of the cysteine function was oxidized in an inverse mini-emulsion by H2O2, resulting in nanogels (~500 nm) which could be confirmed by SEM, AFM, DLS and NTA measurements. Besides POx, oligo (ethylene glycol)acrylates (OEGA) were polymerized; by copolymerization with the reactive pentafluorophenyl acrylate (PFPA) reactive and amphiphilic polymers were obtained. The synthesis of PFPA could be confirmed spectroscopically by 1H , 19F NMR, and by FT IR. Copolymers were synthesized by RAFT polymerization with narrow dispersities. Functionalization with an amine functionalized thiazolidine led to a hydrophilic cysteine functionalized polymer after acidic deprotection. Apart from this polymer, a thioester functionalization was successfully performed by reaction of the active polymer with a cyclic amine functionalized thioester which does not release a toxic by product (such as the resulting thiol) during NCL and thus features a very high potential to replace former thioester.},
  subject      = {Konjugate},
  language  = {en}
}
@phdthesis{Kuehnreich2016,
  author    = {K{\"u}hnreich, Raphael},
  title     = {Development and Validation of Methods for Impurity Profiling of Amino Acids},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-145718},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The requirements for the impurity profiling of substances for pharmaceutical use have become greater over time. They can be accomplished by the use of modern instrumental analysis techniques, which have been evolved in the last decades. New types of columns with HILIC, mixed-mode and chiral stationary phases are suitable for the separation of all kinds of substances mixtures, that were previously hardly possible with the use of common reversed phase columns. Modern, almost universal detectors like CAD, ELSD and CNLSD can be applied for a sensitive detection of substances without a chromophore. However, in addition to some small individual disadvantages to these methods, the costs are high and applications are still kind of rare. Thus, the introduction of these devices at a broader level has not yet taken place. While this presumably will change over time, there is a need for methods that enable the impurity profiling of challenging substances with widespread analytics devices. Methionine is a substance with hydrophobic and hydrophilic impurities. With the help of a mixed-mode stationary phase, which is a combination of a reversed phase and a strong cationic exchanger, the separation of all putative impurities was found possible with good sensitivity and selectivity. The method requires apart from the column only standard isocratic HPLC equipment and was successfully validated. The evaluation of the enantiomeric purity of amino acids is challenging. Two approaches were made. The first method utilizes CE by means of in-capillary derivation with OPA and the subsequent separation with a cyclodextrin. With the use of OPA/NAC and γ-cyclodextrin, a simple and cost-effective method for the indirect enantioseparation of 16 amino acids was developed. With the second approach, racemic amino acids can be analyzed with HPLC and in-needle derivatization. For this, different columns and chiral thiols were evaluated and the chromatographic parameters were optimized. A method with OPA/NIBLC, a pentafluorophenyl column made the enantioseparation of 17 amino acids feasible. A LOQ of the minor enantiomer down to 0.04 \% can be achieved with UV spectrophotometric detection. A similar method was developed for impurity profiling of L-amino acids. This can be used alternatively for the amino acid analysis performed by the European Pharmacopoeia. A simple, robust, precise and accurate method for the evaluation of impurities in glyceryl trinitrate solution was developed and validated. The four impurities of glyceryl trinitrate are separated by means of an acetonitrile-water gradient and the assay for this substance is also possible.},
  subject      = {Aminos{\"a}uren},
  language  = {en}
}
@phdthesis{Dugar2016,
  author    = {Dugar, Gaurav},
  title     = {Comparative transcriptomics and post-transcriptional regulation in \(Campylobacter\) \(jejuni\)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146180},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The transcriptome is defined as the set of all RNA molecules transcribed in a cell. These include protein-coding messenger RNAs (mRNAs) as well as non-coding RNAs, such as ribosomal RNAs (rRNAs), transfer RNAs (tRNAs), and small non-coding RNAs (sRNAs). sRNAs are known to play an important role in regulating gene expression and virulence in pathogens. In this thesis, the transcriptome of the food-borne pathogen Campylobacter jejuni was characterized at single nucleotide resolution by use of next-generation sequencing approaches. The first genome of a C. jejuni strain was published in the year 2000. However, its transcriptome remained uncharacterized at large. C. jejuni can survive in a variety of ecological niches and hosts. However, how strain-specific transcriptional changes contribute to such adaptation is not known. In this study, the global transcriptome maps of four closely related C. jejuni strains were defined using a differential RNA-seq (dRNA-seq) approach. This analysis also included a novel automated method to annotate the transcriptional start sites (TSS) at a genome-wide scale. Next, the transcriptomes of four strains were simultaneously mapped and compared by the use of a common coordinate system derived from whole-genome alignment, termed as SuperGenome. This approach helped to refine the promoter maps by comparison of TSS within strains. Most of the TSS were found to be conserved among all four strains, but some single-nucleotide-polymorphisms (SNPs) around promoter regions led to strain-specific transcriptional output. Most of these SNPs altered transcription only slightly, but some others led to a complete abrogation of transcription leading to differential molecular phenotypes. These in turn might help the strains to adapt to their specific host or microniche. The transcriptome also unveiled a plethora of sRNAs, some of which were conserved among the four strains while others were strain specific. Furthermore, a Cas9-dependent minimal type-II CRISPR-Cas system with only three Cas genes and multiple promoters to drive the transcription of the CRISPR locus was also characterized in C. jejuni using the dRNA-seq dataset. Apart from sRNAs, the role of global RNA binding proteins (RBPs) is also unclear in C. jejuni. Aided by the global transcriptome data, the role of RBPs in post-transcriptional regulation of C. jejuni was studied at a global scale. Two of the most widely studied RNA binding proteins in bacteria are Hfq and CsrA. The RNA interactome of the translational regulator CsrA was defined using another global deep-sequencing technique that combines co-immunoprecipitation (coIP) with RNA sequencing (RIP-seq). Using this interactome dataset, the direct targets of this widespread global post-transcriptional regulator were defined, revealing a significant enrichment for mRNAs encoding genes involved in flagella biosynthesis. Unlike Gammaproteobacteria, where sRNAs such as CsrB/C, antagonize CsrA activity, no sRNAs were enriched in the CsrA-coIP in C. jejuni, indicating absence of any sRNA antagonists and novel modes of CsrA activity regulation. Instead, the CsrA regulatory pathway revealed flaA mRNA, encoding the major flagellin, as a dual-function mRNA. flaA mRNA was the main target of CsrA but it also served to antagonize CsrA activity along with the protein antagonist FliW previously identified in the Gram-positive bacterium Bacillus subtilis. Furthermore, this regulatory mRNA was also shown in this thesis to localize to the poles of elongating C. jejuni cells in a translation-dependent manner. It was also shown that this localization is dependent on the CsrA-FliW regulon, which controls the translation of flaA mRNA. The role and mechanism of flaA mRNA localization or mRNA localization in general is not yet clear in bacteria when compared to their eukaryotic counterparts. Overall, this study provides first insights into riboregulation of the bacterial pathogen C. jejuni. The work presented in this thesis unveils several novel modes of riboregulation in C. jejuni, which could be applicable more generally. Moreover, this study also lays out several unsolved intriguing questions, which may pave the way for interesting studies to come.},
  subject      = {Campylobacter jejuni},
  language  = {en}
}
@phdthesis{Guan2016,
  author    = {Guan, Chonglin},
  title     = {Functional and genetic dissection of mechanosensory organs of \(Drosophila\) \(melanogaster\)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146220},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In Drosophila larvae and adults, chordotonal organs (chos) are highly versatile mechanosensors that are essential for proprioception, touch sensation and hearing. Chos share molecular, anatomical and functional properties with the inner ear hair cells of mammals. These multiple similarities make chos powerful models for the molecular study of mechanosensation. In the present study, I have developed a preparation to directly record from the sensory neurons of larval chos (from the lateral chos or lch5) and managed to correlate defined mechanical inputs with the corresponding electrical outputs. The findings of this setup are described in several case studies. (1) The basal functional lch5 parameters, including the time course of response during continuous mechanical stimulation and the recovery time between successive bouts of stimulation, was characterized. (2) The calcium-independent receptor of α-latrotoxin (dCIRL/Latrophilin), an Adhesion class G protein-coupled receptor (aGPCR), is identified as a modulator of the mechanical signals perceived by lch5 neurons. The results indicate that dCIRL/Latrophilin is required for the perception of external and internal mechanical stimuli and shapes the sensitivity of neuronal mechanosensation. (3) By combining this setup with optogenetics, I have confirmed that dCIRL modulates lch5 neuronal activity at the level of their receptor current (sensory encoding) rather than their ability to generate action potentials. (4) dCIRL´s structural properties (e.g. ectodomain length) are essential for the mechanosensitive properties of chordotonal neurons. (5) The versatility of chos also provides an opportunity to study multimodalities at multiple levels. In this context, I performed an experiment to directly record neuronal activities at different temperatures. The results show that both spontaneous and mechanically evoked activity increase in proportion to temperature, suggesting that dCIRL is not required for thermosensation in chos. These findings, from the development of an assay of sound/vibration sensation, to neuronal signal processing, to molecular aspects of mechanosensory transduction, have provided the first insights into the mechanosensitivity of dCIRL. In addition to the functional screening of peripheral sensory neurons, another electrophysiological approach was applied in the central nervous system: dCIRL may impact the excitability of the motor neurons in the ventral nerve cord (VNC). In the second part of my work, whole-cell patch clamp recordings of motor neuron somata demonstrated that action potential firing in the dCirl\(^K\)\(^O\) did not differ from control samples, indicating comparable membrane excitability.},
  subject      = {Taufliege},
  language  = {en}
}
@phdthesis{HagmanngebKischkies2016,
  author    = {Hagmann [geb. Kischkies], Laura Violetta},
  title     = {Stringent response regulation and its impact on ex vivo survival in the commensal pathogen \(Neisseria\) \(meningitidis\)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144352},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Neisseria meningitidis is a commensal bacterium which sometimes causes serious disease in humans. Recent studies in numerous human pathogenic bacteria have shown that the stringent response contributes to bacterial virulence. Therefore, this study analyzed the regulation of the stringent response in meningococci and in particular of RelA as well as its contribution to ex vivo fitness in a strain- and condition- dependent manner by using the carriage strain α522 and the hyperinvasive strain MC58 in different in vitro and ex vivo conditions. Growth experiments revealed that both wild-type strains were almost indistinguishable in their ex vivo phenotypes. However, quantitative real time PCR (qRT-PCR) found differences in the gene expression of relA between both strains. Furthermore, in contrast to the MC58 RelA mutant strain α522 deficient in RelA was unable to survive in human whole blood, although both strains showed the same ex vivo phenotypes in saliva and cerebrospinal fluid. Moreover, strain α522 was depended on a short non-coding AT-rich repeat element (ATRrelA) in the promoter region of relA to survive in human blood. Furthermore, cell culture experiments with human epithelial cells revealed that in both strains the deletion of relA resulted in a significantly decreased invasion rate while not significantly affecting adhesion. In order to better understand the conditional lethality of the relA deletion, computational and experimental analyses were carried out to unravel differences in amino acid biosynthetic pathways between both strains. Whereas strain MC58 is able to synthesize all 20 amino acids, strain α522 has an auxotrophy for cysteine and glutamine. In addition, the in vitro growth experiments found that RelA is required for growth in the absence of external amino acids in both strains. Furthermore, the mutant strain MC58 harboring an ATRrelA in its relA promoter region showed improved growth in minimal medium supplemented with L-cysteine and/or L-glutamine compared to the wild-type strain. Contrary, in strain α522 no differences between the wild-type and the ATRrelA deletion mutant were observed. Together this indicates that ATRrelA interferes with the complex regulatory interplay between the stringent response pathway and L-cysteine as well as L-glutamine metabolism. It further suggests that meningococcal virulence is linked to relA in a strain- and condition- depended manner. In conclusion, this work highlighted the role of the stringent response and of non-coding regulatory elements for bacterial virulence and indicates that virulence might be related to the way how meningococci accomplish growth within the host environments.},
  subject      = {Neisseria meningitidis},
  language  = {en}
}
@phdthesis{Leinders2016,
  author    = {Leinders, Mathias},
  title     = {microRNAs in chronic pain},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144395},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Chronic pain is a common problem in clinical practice, not well understood clinically, and frequently tough to satisfactorily diagnose. Because the pathophysiology is so complex, finding effective treatments for people with chronic pain has been overall less than successful and typically reduced to an unsatisfactory trial-and-error process, all of which translates into a significant burden to society. Knowledge of the mechanisms underlying the development of chronic pain, and moreover why some patients experience pain and others not, may aid in developing specific treatment regimens. Although nerve injuries are major contributors to pain chronification, they cannot explain the entire phenomenon. Considerable research has underscored the importance of the immune system for the development and maintenance of chronic pain, albeit the exact factors regulating inflammatory reactions remain unclear. Understanding the putative molecular and cellular regulator switches of inflammatory reactions will open novel opportunities for immune modulatory analgesics with putatively higher specificity and less adverse effects. It has become clear that small, non- coding RNA molecules known as microRNAs are in fact potent regulators of many thousands of genes and possibly cross-communicate between cellular pathways in multiple systems acting as so-called "master-switches". Aberrant expression of miRNAs is now implicated in numerous disorders, including nerve injuries as well as in inflammatory processes. Moreover, compelling evidence supports the idea that miRNAs also regulate pain, and in analogy to the oncology field aid in the differential diagnosis of disease subtypes. In fact, first reports describing characteristic miRNA expression profiles in blood or cerebrospinal fluid of patients with distinct pain conditions are starting to emerge, however evidence linking specific miRNA expression profiles to specific pain disorders is still insufficient. The present thesis aimed at first, identifying specific miRNA signatures in two distinct chronic pain conditions, namely peripheral neuropathies of different etiologies and fibromyalgia syndrome. Second, it aimed at identifying miRNA profiles to better understand potential factors that differentiate painful from painless neuropathies and third, study the mechanistic role of miRNAs in the pathophysiology of pain, to pave the way for new druggable targets. Three studies were conducted in order to identify miRNA expression signatures that are characteristic for the given chronic pain disorder. The first study measured expression of miR-21, miR-146a and miR-155 in white blood cells, skin and nerve biopsies of patients with peripheral neuropathies. It shows that peripheral neuropathies of different etiologies are associated with increased peripheral miR-21 and miR-146a, but decreased miR-155 expression. More importantly, it was shown that painful neuropathies have increased sural nerve miR-21 and miR-155 expression, but reduced miR-146a and miR-155 expression in distal skin of painful neuropathies. These results point towards the potential use of miRNAs profiles to stratify painful neuropathies. The seconds study extends these findings and first analyzed the role of miR-132-3p in patients and subsequently in an animal model of neuropathic pain. Interestingly, miR-132-3p was upregulated in white blood cells and sural nerve biopsies of patients with painful neuropathies and in animals after spared nerve injury. Pharmacologically modulating the expression of miR-132-3p dose-dependently reversed pain behavior and pain aversion, indicating the pro-nociceptive effect of miR-132-3p in chronic pain. This study thus demonstrates the potential analgesic impact by modulating miRNA expression. Fibromyalgia is associated with chronic widespread pain and, at least in a subgroup, impairment in small nerve fiber morphology and function. Interestingly, the disease probably comprises subgroups with different underlying pathomechanisms. In accordance with this notion, the third study shows that fibromyalgia is associated with both aberrant white blood cell and cutaneous miRNA expression. Being the first of its kind, this study identified miR-let-7d and its downstream target IGF-1R as potential culprit for impaired small nerve fiber homeostasis in a subset of patients with decreased intra-epidermal nerve fiber density. The work presented in this thesis is a substantial contribution towards the goal of better characterizing chronic pain based on miRNA expression signatures and thus pave the way for new druggable targets.},
  subject      = {miRNS},
  language  = {en}
}
@phdthesis{Truestedt2016,
  author    = {Tr{\"u}stedt, Jonas Elias},
  title     = {Long-wavelength radio observations of blazars with the Low-Frequency Array (LOFAR)},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144406},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Aktive Galaxienkerne (AGN) geh{\"o}ren zu den hellsten Objekten in unserem Universum. Diese Galaxien werden als aktiv bezeichnet, da ihre Zentralregion heller ist als alle Sterne in einer Galaxie zusammen beitragen k{\"o}nnten. Das Zentrum besteht aus einem supermassiven schwarzen Loch, das von einer Akkretionsscheibe und weiter außerhalb von einem Torus aus Staub umgeben ist. Diese AGN k{\"o}nnen {\"u}ber das ganze elektromagnetische Spektrum verteilt gefunden werden, von Radiowellen {\"u}ber Wellenl{\"a}ngen im optischen und R{\"o}ntgenbereich bis hin zur \$\gamma\$-Strahlung. Allerdings sind nicht alle Objekte bei jeder Wellenl{\"a}nge detektierbar. In dieser Arbeit werden {\"u}berwiegend Blazare bei niedrigen Radiofrequenzen untersucht. Blazare geh{\"o}ren zu den radio-lauten AGN, welche {\"u}blicherweise stark kollimierte Jets senkrecht zur Akkretionsscheibe aussenden. Bei Blazaren sind diese Jets in die Richtung des Beobachters gerichtet und ihre Emissionen sind stark variabel. \\ AGN werden anhand ihres Erscheinungsbildes verschiedenen Untergruppen zugeordnet. Diese Untergruppen werden in einem vereinheitlichen AGN Modell zusammengef{\"u}hrt, welches besagt, dass diese Objekte sich nur in ihrer Luminosit{\"a}t und ihrem Winkel zur Sichtlinie unterscheiden. Blazare sind diejenigen Objekte, deren Jets in unsere Sichtrichtung zeigen, w{\"a}hrend die Objekte deren Jets eher senkrecht zur Sichtlinie orientiert sind als Radiogalaxien bezeichnet werden. Daraus folgt, dass Blazare die Gegenst{\"u}cke zu Radiogalaxien mit einem anderen Winkel zur Sichtlinie sind. Diese Beziehung soll unter anderem in dieser Arbeit untersucht werden. \\ Nach ihrer Entdeckung in den 1940er Jahren wurden die aktiven Galaxien bei allen zug{\"a}nglichen Wellenl{\"a}ngen untersucht. Durch die Entwicklung von Interferometern aus Radioteleskopen, welche eine erh{\"o}hte Aufl{\"o}sung bieten, konnten die Beobachtungen stark verbessert werden. In den letzten 20 Jahren wurden viele AGN regelm{\"a}ßig beobachtet. Dies erfolgte unter anderem durch Programme wie dem MOJAVE Programm, welches 274 AGNs regelm{\"a}ßig mithilfe der Technik der ``Very Long Baseline Interferometry" (VLBI) beobachtet. Durch diese Beobachtungen konnten Informationen zur Struktur und Entwicklung der AGN und Jets gesammelt werden. Allerdings sind die Prozesse zur Bildung von Jets und deren Kollimation noch nicht vollst{\"a}ndig bekannt. Durch relativistische Effekte ist es schwierig die eigentlichen Gr{\"o}ßen der Jets anstelle der scheinbaren zu messen. Um die intrinsische Energie von Jets zu messen, sollen die ausgedehnten Emissionsregionen untersucht werden, in denen die Jets enden und mit dem Intergalaktischen Medium interagieren. Beobachtungen bei niedrigen Radiofrequenzen sind empfindlicher um solche ausgedehnte, diffuse Emissionsregionen zu detektieren. \\ Seit Dezember 2012 ist ein neues Radioteleskop f{\"u}r niedrige Frequenzen in Betrieb, dessen Stationen aus Dipolantennen besteht. Die meisten dieser Stationen sind in den Niederlanden verteilt (38 Stationen) und werden durch 12 internationale Stationen in Deutschland, Frankreich, Schweden, Polen und England erg{\"a}nzt. Dieses Instrument tr{\"a}gt den Namen ``Low Frequency Array'' (LOFAR). LOFAR bietet die M{\"o}glichkeit bei Frequenzen von 30--250 MHz bei einer h{\"o}heren Aufl{\"o}sung als bisherige Radioteleskope zu beobachten (Winkelaufl{\"o}sungen unter 1 arcsec f{\"u}r das gesamte Netzwerk aus Teleskopen). \\ Diese Arbeit behandelt die Ergebnisse von Blazaruntersuchungen mithilfe von LOFAR-Beobachtungen. Daf{\"u}r wurden AGNs aus dem MOJAVE Programm verwendet um von den bisherigen Multiwellenl{\"a}ngen-Beobachtungen und Untersuchungen der Kinematik zu profitieren. Das ``Multifrequency Snapshot Sky Survey'' (MSSS) Projekt hat den gesamten Nordhimmel mit kurzen Beobachtungen abgerastert. Aus dem daraus resultierenden vorl{\"a}ufigen Katalog wurden die Flussdichten und Spektralindizes f{\"u}r MOJAVE-Blazare untersucht. In den kurzen Beobachtungen von MSSS sind nur die Stationen in den Niederlanden verwendet worden, wodurch Aufl{\"o}sung und Sensitivit{\"a}t begrenzt sind. F{\"u}r die Erstellung des vorl{\"a}ufigen Kataloges wurde die Aufl{\"o}sung auf \$\sim\$120 arcsec beschr{\"a}nkt. Ein weiterer Vorteil der MOJAVE Objekte ist die regelm{\"a}ßige Beobachtung der AGN mit dem ``Owens Vally Radio Observatory'' zur Erstellung von Lichtkurven bei 15 GHz. Dadurch ist es m{\"o}glich nahezu zeitgleiche Flussdichtemessungen bei 15 GHz zu den entsprechenden MSSS-Beobachtungen zu bekommen. Da diese Beobachtungen zu {\"a}hnlichen Zeitpunkten durchgef{\"u}hrt wurden sind diese Flussdichten weniger von der Variabilit{\"a}t der Blazare beeinflusst. Die Spektralindizes berechnet aus den Flussdichten von MSSS und OVRO k{\"o}nnen verwendet werden um den Anteil an ausgedehnter Emission der AGNs abzusch{\"a}tzen. \\ Im Vergleich der Flussdichten aus dem MSSS Katalog mit den Beobachtungen von OVRO f{\"a}llt auf, dass die Flussdichten bei niedrigen Frequenzen tendenziell h{\"o}her sind, was durch den h{\"o}heren Anteil an ausgedehnter Struktur zu erwarten ist. Die Spektralindexverteilung zwischen MSSS und OVRO zeigt ihren h{\"o}chsten Wert bei \$\sim-0.2\$. In der Verteilung existieren Objekte mit steilerem Spektralindex durch den h{\"o}heren Anteil von ausgedehnter Emission in der Gesamtflussdichte, doch {\"u}ber die H{\"a}lfte der untersuchten Objekte besitzt flache Spektralindizes. Die flachen Spektralindizes bedeuten, dass die Emissionen dieser Objekte gr{\"o}ßtenteils von relativistischen Effekten beeinflusst sind, die schon aus Beobachtungen bei GHz-Frequenzen bekannt sind. \\ Durch neue Auswertung der MSSS Beobachtungsdaten konnten Bilder bei einer verbesserten Aufl{\"o}sung von \$\sim\$20--30 arcsec erstellt werden, wodurch bei einigen Blazaren ausgedehnte Struktur detektiert werden konnte. Diese h{\"o}her aufgel{\"o}sten Bilder sind allerdings nicht komplett kalibriert und k{\"o}nnen somit nur f{\"u}r strukturelle Informationen verwendet werden. Die {\"U}berarbeitung der Beobachtungsdaten konnte f{\"u}r 93 Objekte f{\"u}r ein Frequenzband durchgef{\"u}hrt werden. F{\"u}r 45 der 93 Objekte konnten sogar alle vorhandenen Frequenzb{\"a}nder {\"u}berarbeitet werden und dadurch gemittelte Bilder erstellt werden. Diese Bilder werden in dieser Arbeit vorgestellt. Die resultierenden Bilder mit verbesserter Aufl{\"o}sung wurden verwendet um Objekte auszuw{\"a}hlen, die mit allen LOFAR-Stationen beobachtet und auf ausgedehnte Struktur untersucht werden k{\"o}nnen. \\ Im zweiten Teil der Arbeit werden die Ergebnisse von internationalen LOFAR Beobachtungen von vier Blazaren pr{\"a}sentiert. Da sich die Auswertung und Kalibration von internationalen LOFAR Beobachtungen noch in der Entwicklung befindet, wurde ein Schwerpunkt auf die Kalibration und deren Beschreibung gelegt. Die Kalibration kann zwar noch verbessert werden, aber die Bilder aus der angewandten Kalibration erreichen eine Aufl{\"o}sung von unter 1 arcsec. Die Struktur der untersuchten vier Blazare entspricht den Erwartungen f{\"u}r Radiogalaxien unter einem anderen Sichtwinkel. Durch die gemessenen Flussdichten der ausgedehnten Struktur aus den Helligkeitsverteilungen konnte die Luminosit{\"a}t der ausgedehnten Emissionen berechnet werden. Im Vergleich mit den Luminosit{\"a}ten, die von Radiogalaxien bekannt sind, entsprechen auch diese Werte den Erwartungen des vereinheitlichten AGN Modells. \\ Durch die in dieser Arbeit vorgestellte Kalibration k{\"o}nnen noch mehr Blazare mit LOFAR inklusive den internationalen Stationen beobachtet werden und somit Bilder der Struktur bei {\"a}hnlicher Aufl{\"o}sung erstellt werden. Durch eine erh{\"o}hte Anzahl von untersuchten Blazaren k{\"o}nnten anschließend auch statistisch signifikante Ergebnisse erzielt werden.\\},
  subject      = {Blazar},
  language  = {en}
}
@phdthesis{Bellinger2016,
  author    = {Bellinger, Daniel},
  title     = {Implementation of new reaction pathway determining methods and study of solvent effects on the excited state nature of perylene based dyes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-144435},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Two thematic complexes were addressed within this work. One part is related to improvements and new implementations into the CAST program package. Thereby the main focus laid on the delivery of a tool which can be used to characterize complex reactions and their mechanisms. But also within the new force field (FF) method (SAPT-FF) within the CAST program, several improvements were made. The second topic is related to the description of dye molecules and their spectral properties. The main focus within these studies was set on the influence of the environment on these properties. In the first topic improvements of the local acting NEB (nudged elastic band) methods were included and the number of available methods was extended. The initial pathway generation was improved by implementing the IDPP (image dependent pair potential) method and a new method was implemented for describing temperature dependent pathways. Additionally, improvements have been made to the optimization routines (global NEB). As a second part the Pathopt (PO) method was considerably improved. In the beginning of the work the original PO idea was used. In this approach one starts with a global optimization on one n-1 dimensional hyperplane which divides the reaction into two sub-areas for obtaining guesses of TSs (transition states). These found TS guesses were used to optimize to the "true" TS. Starting from the optimized ones a relaxation to the next connected minima is done. This idea has been automatically implemented and extended to several number of hyperplanes. In this manner a group of pathsegments is obtained which needs to be connected, but within this work it was realized that such a procedure might be not very efficient. Therefore, a new strategy was implemented which is founded on the same constrained global optimization scheme (MCM) for which the user defines the number of hyperplanes generated. The number of such generated hyperplanes should be large enough 134 to describe the space between the concerning reactants in a sufficient way. The found minima are directly used to built up the reaction pathway. For this purpose a RMSD (root mean square deviation) criterion is used to walk along ways of minimal change from one to another hyperplane. To prove the implementations various test calculations were carried out and extensions included to prove the capabilities of the new strategy. Related to these tests a new strategy for applying the move steps in MCM (Monte Carlo with minimization) was realized which is also related to the question of the coordinates representation. We were able to show that the hopping steps in MCM can be improved by applying Cartesian steps in combination of random dihedral moves with respect to the constraint. In this way it was possible to show that a large variety of systems can be treated. An additional chapter shows the improvements of the SAPT-FF implementation and related test cases. It was possible to treat benzene dimer and cluster systems of different sizes consistently also in accordance with high level ab initio based approaches. Furthermore, we showed that the SAPT-FF with the right parameters outperforms the standard AMOEBA implementation which is the basis of the SAPT-FF implementation. In the last three chapters deal with the description of perlyene-based dyes. In the first smaller chapter ground state chemistry description of macro cycles of PBI (perylene bisimide) derivatives were investigated. Therefore, AFM (atomic force microscopy) based pictures were explained within our study. The methods to explain aggregation behavior in dependency of the ring size were MD simulations and configuration studies. The last two chapters deal with opto-electronic or photo-physical properties of PBI and PTCDA (perylene-3,4,9,10-tetracarboxylic dianhydride). In detail, we investigated the role of the environment and the aggregate or crystal surrounding by applying different models. In that way implicit and explicit solvation models, the size of aggregates and vibration motions were used. In the case of PBI the recent work is found on preliminary studies related to my bachelor thesis and extends it. It was shown that the direct influence of a polarizable surrounding, as well as explicit inclusion of solvent molecules on the overall description of the excitations and nature of the excited states is weaker as one might expect. However the inclusion of intra-molecular degrees of freedom showed a stronger influence on the state characteristics and can induce a change of the order of states within the dimer picture. For the PTCDA molecule the main focus was set on the description of the absorption spectrum of crystalline thin films. Related to this older works exist which already gave a description and assignment of the absorption band, but are based on different approaches compared to the one used in this work. We used the supermolecule ansatz, whereas the environment and different aggregate sizes were investigated. Within the dimer based approach we were able to show that using continuum solvation (IEFPCM/COSMO) based description for the environment the relative order of states remains unchanged. Similar to the PBI calculations the influence of the vibrational motions /distortions is larger. The simulation of the crystal environment by using QM/MM (quantum mechanics/molecular mechanics) approaches delivered that an asymmetric charge distribution might induce a localization of the excitation and a stronger mixing of states. For obtaining further insights we go beyond the dimer picture and aggregates of different sizes were used, whereas the simulations up to the octadecamer mono- and even dual-layer stack were carried out. Within these calculations it was shown that the H-coupling is dominating over a weaker J-coupling between different stacks. Additionally the calculations based on DFT (density functional theory) and semi-empirics showed that the lowest state in terms of energy are mostly of Frenkel type, whereas the higher lying states are CT ones which mix with embedded Frenkel type states. The first band of the absorption spectrum was explained by inclusion of vibrational motions within the stacks which induce an intensity gain of the first excited state. This intensity was not explainable by using the undistorted stacks. Also relaxations at the crystal surface might play a role, but are experimentally not explainable.},
  subject      = {Globale Optimierung},
  language  = {en}
}
@phdthesis{Schulze2016,
  author    = {Schulze, Marcus},
  title     = {Ruthenium Complexes as Water Oxidation Catalysts and Photosensitizers},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142454},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In der vorliegenden Arbeit werden Aspekte der photokatalytischen Wasseroxidationsreaktion behandelt. Der erste Themenschwerpunkt der Dissertation besch{\"a}ftigt sich mit einem supramolekularen Makrozyklus, der drei Rutheniummetallzentren enth{\"a}lt. Dieser neuartige Katalysator zeigt eine sehr hohe katalytische Aktivit{\"a}t und gew{\"a}hrt neue Einblicke in den Mechanismus der Wasseroxidationsreaktion. Des Weiteren wird auf die mit Licht interagierenden Komponenten der photokatalytischen Wasseroxidation eingegangen. Hierbei haben sich azabenz-anellierte Perylenderivate als vielseitige Farbstoffklasse herausgestellt. Die Kombination dieser Farbstoffe mit Metallkomplexen liefert metallorganische Verbindungen, die als Photosensibilisatoren eingesetzt werden k{\"o}nnen.},
  subject      = {Farbstoff},
  language  = {en}
}
@phdthesis{Herrmann2016,
  author    = {Herrmann, Oliver},
  title     = {Graphene-based single-electron and hybrid devices, their lithography, and their transport properties},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-146924},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {This work explores three different aspects of graphene, a single-layer of carbon atoms arranged in a hexagonal lattice, with regards to its usage in future electronic devices; for instance in the context of quantum information processing. For a long time graphene was believed to be thermodynamically unstable. The discovery of this strictly two-dimensional material completed the family of carbon based structures, which had already been subject of intensive research with focus on zero-dimensional fullerenes and one-dimensional carbon nanotubes. Within only a few years of its discovery, the field of graphene related research has grown into one of today's most diverse and prolific areas in condensed matter physics, highlighted by the award of the 2010 Nobel Prize in Physics to A.K. Geim and K. Noveselov for "their groundbreaking experiments regarding the two-dimensional material graphene". From the point of view of an experimental physicist interested in the electronic properties of a material system, the most intriguing characteristic of graphene is found in the Dirac-like nature of its charge carriers, a peculiar fact that distinguishes graphene from all other known standard semiconductors. The dynamics of charge carriers close to zero energy are described by a linear energy dispersion relation, as opposed to a parabolic one, which can be understood as a result of the underlying lattice symmetry causing them to behave like massless relativistic particles. This fundamentally different behavior can be expected to lead to the observation of completely new phenomena or the occurrence of deviations in well-known effects. Following a brief introduction of the material system in chapter 2, we present our work studying the effect of induced superconductivity in mesoscopic graphene Josephson junctions by proximity to superconducting contacts in chapter 3. We explore the use of Nb as the superconducting material driven by the lack of high critical temperature and high critical magnetic field superconductor technology in graphene devices at that time. Characterization of sputter-deposited Nb films yield a critical transition temperature of \(T_{C}\sim 8{\rm \,mK}\). A prerequisite for successful device operation is a high interface quality between graphene and the superconductor. In this context we identify the use of an Ti as interfacial layer and incorporate its use by default in our lithography process. Overall we are able to increase the interface transparency to values as high as \(85\\%\). With the prospect of interesting effects in the ballistic regime we try to enhance the electronic quality of our Josephson junction devices by substrate engineering, yet with limited success. We achieve moderate charge carrier mobilities of up to \(7000{\rm \,cm^2/Vs}\) on a graphene/Boron-nitride heterostructure (fabrication details are covered in chapter 5) putting the junction in the diffusive regime (\(L_{device}<L_{\rm{mfp}}\)). We speculate that either inhomogeneities in the graphene channel or lithography residues are responsible for this observation. Furthermore we study the Josephson effect and Andreev reflection related physics in this device by low-temperature transport measurements. The junction carries a bipolar supercurrent which remains finite at the charge neutrality point. The genuine Josephson character is confirmed by the modulation of the supercurrent as a function of an out-of-plane magnetic field resembling that of a Fraunhofer-like pattern. This is further supported by the response of the junction to microwave radiation in the form of Shaprio steps. Surprisingly we find a strongly reduced superconducting energy gap of approximately \(\Delta = 400{\rm \,\mu eV}\) by quantitatively analyzing data of multiple Andreev reflections. We show this result to be consistent by careful analysis of the device parameters and comparison of these to a theoretical model. More experiments will be needed to determine the origin of this reduction and if the presence of the Ti interfacial layer plays an important role in that. With regards to possible usability of superconducting contacts in more complex hybrid structures we can conclude that our work establishes the necessary preconditions while still leaving room for improvements; especially in terms of device quality. In the second part of this work we are primarily interested in electrical transport properties of graphene nanodevices and their application in graphene-superconductor hybrid structures. The fact that graphene is mechanically stable down to a few tens of nanometers in width while exhibiting a finite conductance makes it an appealing choice as host for single-electron devices, also known as quantum dots. Our work on this topic is covered in chapter 4 where we first develop a high-resolution lithography process for the fabrication of single electron devices with critical feature sizes of roughly \(50{\rm \,nm}\). To this end we use a resist etch mask in combination with a reactive-ion etch process for device patterning. Carrier confinement in graphene is known to be hindered by the Klein tunneling phenomenon, a challenge that can be overcome by using all-graphene nano-constrictions to decouple the source and drain contacts from the central island. The traditionally used constriction design is comprised of long and narrow connections. We argue that a design with very short and narrow constrictions could be beneficial for the quantum dot performance as the length merely affects the overall conductance and requires extended side-gates to control their transmission. We confirm the functionality of two different devices in low-temperature measurements, which differ in the size of their central island with \(d=250{\rm \,nm}\) for device no. 1 and \(d=400{\rm \,nm}\) for device no. 2. Coulomb blockade measurements conducted at \(20{\rm \,mK}\) on both devices reveal clear sequences of Coulomb peaks with amplitudes of up to \(0.8\rm{\,e}^2/\rm{h}\), a value significantly larger than what is commonly reported for similar devices. We interpret this as an indication of rather homogeneous constrictions, resulting from the modified design. Coulomb diamond measurements display the behavior expected for a lithographically designed single quantum dot revealing no features related to the presence of an additional dot. Using the stability diagram we determine the addition energies of the two dots and find them to be in good agreement with values reported in the literature for devices of similar size. Using the normalized Coulomb peak spacing as a figure of merit for the device quality we find that device no. 1 quantitatively compares well with a similar device fabricated on a superior hexagonal boron-nitride substrate. This result underlines the importance of non-substrate related extrinsic disorder sources and emphasizes the cleanliness of our lithography process. Superconductor-graphene quantum dot hybrid structures employing Nb and Al electrodes were successfully fabricated from a lithography point of view, yet no evidence of any superconducting related effect was found in transport measurements. We assign the missing observation to interface issues that require careful analysis and likely a revision of the fabrication process. A property equally important in graphene Josephson Junctions and quantum dots is the electronic quality of the device, as has been addressed in the previous paragraphs. It turns out that the \(\rm{SiO}_{2}\;\) substrate and lithography residues constitute the two major sources of disorder in graphene. In chapter 5 we present an approach based on the original work of Dean et al. who utilize hexagonal-Boron nitride as a replacement substrate for \(\rm{SiO}_{2}\). This idea was then extended by Wang et al. who also used this material as a shield to protect the graphene surface from contaminations during the lithography process. These structures are commonly referred to as van der Waals heterostructures and are assembled by stacking individual crystals on top of each other. For this purpose we build a mechanical transfer system based on an optical microscope equipped with an additional micro-manipulator stage allowing precise alignment of two micrometer sized crystals with high precision. We demonstrate the functionality of this setup on the basis of successfully fabricated heterostructures. Furthermore a variation on the traditional method for single graphene/boron nitride structures is presented. Based on a reversed stacking order this method yields large areas of homogeneous graphene, however it comes with the drawback of limited yields. A common type of problem accompanying the fabrication of encapsulated graphene structures is the formation of contamination spots (also referred to as bubbles in the literature) at the interfaces between BN and graphene. We experience similar issues which we are unable to prevent and thus pose a limit to the maximum available device size. In the next step we develop a full lithography paradigm including high-resolution device patterning by electron beam lithography combined with reactive ion etching and two different ways to establish electrical contact to the encapsulated graphene flake. In this context we explore the use of three different types of etch masks and find a double layer of PMMA/HSQ best suited for our purposes. Our low power plasma etch process utilizes a combination of \(\rm{O}_{2}\;\) and \(\rm{CHF}_{3}\;\) and is optimized to show reproducible etch results. A widely used method for electrical contacts relies on one-dimensional edge contacts whose functionality crucially depends on the use of Cr as the interface layer. For compatibility reasons with superconducting materials, e.g. Nb, we develop a self-aligned contact process that instead of only Cr is also compatible with Ti. We achieve this by modifying the plasma etch parameters such that the etch process exhibits extremely low graphene etch rates while keeping a high etch rate for h-BN. This allows clearing of a narrow stripe of graphene at the edge of the structure by using a thick PMMA layer as etch mask as replacement of the PMMA/HSQ combination. The purpose of this PMMA mask is two-fold since it also serves as lift-off mask during metalization. The quality of the edge contacts fabricated with either method is excellent as determined from transport measurements at room and cryogenic temperatures. With typical contact resistances of a few hundred \({\rm \,}\Omega\mu{\rm m}\) and a record low of \(100{\rm \,}\Omega\mu{\rm m}\) the contacts can be considered to be state-of-the-art. The positive effect of encapsulation on the electronic quality is confirmed on a device exhibiting charge carrier mobilities exceeding \(10^5{\rm \,cm^2/Vs}\), one magnitude larger than what is commonly achieved on \(\rm{SiO}_{2}\). The investigation of induced superconductivity in graphene Josephson Junctions, quantum dots, and high mobility heterostructures underlines the versatility of this material system, while covering only a tiny fraction of its prospects. Combination of the acquired knowledge regarding the physical effects and the developed lithography processes lay the foundation towards the fabrication and study of novel graphene hybrid devices.},
  subject      = {Graphen},
  language  = {en}
}
@phdthesis{Kindermann2016,
  author    = {Kindermann, Philipp},
  title     = {Angular Schematization in Graph Drawing},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-020-7 (print)},
  doi       = {10.25972/WUP-978-3-95826-021-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-112549},
  school      = {W{\"u}rzburg University Press},
  pages     = {184},
  year      = {2016},
  abstract  = {Graphs are a frequently used tool to model relationships among entities. A graph is a binary relation between objects, that is, it consists of a set of objects (vertices) and a set of pairs of objects (edges). Networks are common examples of modeling data as a graph. For example, relationships between persons in a social network, or network links between computers in a telecommunication network can be represented by a graph. The clearest way to illustrate the modeled data is to visualize the graphs. The field of Graph Drawing deals with the problem of finding algorithms to automatically generate graph visualizations. The task is to find a "good" drawing, which can be measured by different criteria such as number of crossings between edges or the used area. In this thesis, we study Angular Schematization in Graph Drawing. By this, we mean drawings with large angles (for example, between the edges at common vertices or at crossing points). The thesis consists of three parts. First, we deal with the placement of boxes. Boxes are axis-parallel rectangles that can, for example, contain text. They can be placed on a map to label important sites, or can be used to describe semantic relationships between words in a word network. In the second part of the thesis, we consider graph drawings visually guide the viewer. These drawings generally induce large angles between edges that meet at a vertex. Furthermore, the edges are drawn crossing-free and in a way that makes them easy to follow for the human eye. The third and final part is devoted to crossings with large angles. In drawings with crossings, it is important to have large angles between edges at their crossing point, preferably right angles.},
  language  = {en}
}
@phdthesis{Wiebusch2016,
  author    = {Wiebusch, Dennis},
  title     = {Reusability for Intelligent Realtime Interactive Systems},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-040-5 (print)},
  doi       = {10.25972/WUP-978-3-95826-041-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-121869},
  school      = {W{\"u}rzburg University Press},
  pages     = {260},
  year      = {2016},
  abstract  = {Software frameworks for Realtime Interactive Systems (RIS), e.g., in the areas of Virtual, Augmented, and Mixed Reality (VR, AR, and MR) or computer games, facilitate a multitude of functionalities by coupling diverse software modules. In this context, no uniform methodology for coupling these modules does exist; instead various purpose-built solutions have been proposed. As a consequence, important software qualities, such as maintainability, reusability, and adaptability, are impeded. Many modern systems provide additional support for the integration of Artificial Intelligence (AI) methods to create so called intelligent virtual environments. These methods exacerbate the above-mentioned problem of coupling software modules in the thus created Intelligent Realtime Interactive Systems (IRIS) even more. This, on the one hand, is due to the commonly applied specialized data structures and asynchronous execution schemes, and the requirement for high consistency regarding content-wise coupled but functionally decoupled forms of data representation on the other. This work proposes an approach to decoupling software modules in IRIS, which is based on the abstraction of architecture elements using a semantic Knowledge Representation Layer (KRL). The layer facilitates decoupling the required modules, provides a means for ensuring interface compatibility and consistency, and in the end constitutes an interface for symbolic AI methods.},
  subject      = {Virtuelle Realit{\"a}t},
  language  = {en}
}
@phdthesis{Busch2016,
  author    = {Busch, Stephan},
  title     = {Robust, Flexible and Efficient Design for Miniature Satellite Systems},
  isbn      = {978-3-945459-10-2},
  doi       = {10.25972/OPUS-13652},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136523},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology. This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg's advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner. Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions. The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested.},
  subject      = {Kleinsatellit},
  language  = {en}
}
@phdthesis{Schindele2016,
  author    = {Schindele, Andreas},
  title     = {Proximal methods in medical image reconstruction and in nonsmooth optimal control of partial differential equations},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136569},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Proximal methods are iterative optimization techniques for functionals, J = J1 + J2, consisting of a differentiable part J2 and a possibly nondifferentiable part J1. In this thesis proximal methods for finite- and infinite-dimensional optimization problems are discussed. In finite dimensions, they solve l1- and TV-minimization problems that are effectively applied to image reconstruction in magnetic resonance imaging (MRI). Convergence of these methods in this setting is proved. The proposed proximal scheme is compared to a split proximal scheme and it achieves a better signal-to-noise ratio. In addition, an application that uses parallel imaging is presented. In infinite dimensions, these methods are discussed to solve nonsmooth linear and bilinear elliptic and parabolic optimal control problems. In particular, fast convergence of these methods is proved. Furthermore, for benchmarking purposes, truncated proximal schemes are compared to an inexact semismooth Newton method. Results of numerical experiments are presented to demonstrate the computational effectiveness of our proximal schemes that need less computation time than the semismooth Newton method in most cases. Results of numerical experiments are presented that successfully validate the theoretical estimates.},
  subject      = {Optimale Kontrolle},
  language  = {en}
}
@phdthesis{Gradmann2016,
  author    = {Gradmann, Rena},
  title     = {Analysis of Historical Islamic Glazes and the Development of a Substitution Material},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136233},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {11 Conclusion 11.1 Glaze compositions Glazes from tiles of imposing Islamic buildings and some tableware glazes of the medieval epoch in Central Asia, the Middle East, Asia Minor, and North Africa are analysed regarding their main composition and colouring agents. Three major production recipes can be distinguished, i.e. alkali glazes, alkali lead glazes, and lead glazes. In the work of Tite (2011), Islamic glazes from Egypt, Iran, Iraq, and Syria are subdivided into four groups of composition, being partly consistent with those of this work. The alkali lime glazes with <2 wt\% PbO correspond to the alkali glazes, but with higher content of CaO. The second and third group of low lead alkali and lead alkali glazes (2-10 wt\% PbO and 10-35 wt\% PbO) can be subsumed to the alkali lead group described here. Tite´s high lead group has PbO contents >35 wt\% and is comparable to the lead glazes (>30 wt\% PbO) of this study. The lead and the alkali oxides serve as a flux for the lowering the melting point. In the interaction of ceramic body and glaze, primarily an influence from Si, Al, and K is observed in the line scans from the cross section of ceramic and glaze. However, the input of ceramic material doesn't seem to be critical for the classification of glazes according to their alkali and alkali lead compositions. In every epoch and locality, except of the Ilkhanate dynasty in Iran, lead glaze samples can be verified. This is also observed in previous investigations e.g. from medieval Iraq, Jordan and Iran (McCarthy, 1996; Al-Saad, 2002; Holakooei et al., 2014). In the Moroccan and Bulgarian glazes, lead seems to be the only important flux. In part, the lead flux is supplemented by additional alkali contents. The lack of alkali and alkali lead glazes in Bulgarian and Moroccan glazes (assuming that the Ottoman alkali lead glazes are imported tableware) seems to affect the regions with Roman-influenced history and with geographical distance to the Near East alkali flux tradition. For the alkali lead glazes and alkali glazes, the overall characteristic is sodium dominated, although the absolute soda values are in part surprisingly low. Samples from Bukhara, Takht-i-Suleiman and the Turkish localities have the highest, but still moderate Na2O values up to 15 wt\%, compared to other analyses from e.g. India (Gill \& Rehren, 2011). The source of the alkali flux is either mineral natron or plant ash. The source can be determined regarding the MgO values, limited to 1.3 wt\% in mineral natron and exceeding 2.0 wt\% in the case of plant ashes. In the samples of the present study, the K2O component is not suitable for the indication of the flux-relevant alkali source due to its broad scattering. The P2O5 contents are also enhanced in the plant ash compositions but the data set is not sufficient for statistical evaluation. An influence of the ceramic body on the glaze composition is observed only for SiO2, Al2O3, and K2O in quartz frit ceramics with slight K-feldspar content. The earliest Uzbek tableware glazes from the 10th-11th century (Seljuq period) were generally produced using a lead flux. The same applies to part of the Uzbek tile glazes which were produced between the 13th and 16th century. In Iran, glazes from the 12th century (Khwarezmid period) are lead glazes, but also alkali-fluxed glazes with mineral natron characteristics can be found. Although the production of lead-rich glazes was established from the 8th-9th century on in Iraq, Syria, and Egypt (Henshaw, 2010; Tite et al., 2011), alkali glazes are found in almost all regions except of Bulgaria and Morocco. Plant ash-fluxed alkali glazes are found in 13th century glazes from Takht-i-Suleiman. The plant ash flux technology is assumed to be continuously used in Mesopotamia, Iran, and Central Asia (Sayre \& Smith, 1974; Henderson, 2009), but it could be shown that a parallel use of mineral natron parallel existed in the alkali glaze production from the 12th-15th century from Uzbekistan to Afghanistan. Mineral natron characteristics are also reported by Mason (2004) for Syrian and Iranian alkali glazes on lustre ware of the 8th-14th century. Tile glazes with partly mineral natron compositions are found in the Mughal architectural glazes from the 14th- 17th century from India (Gill et al., 2014). Alkali and alkali lead tile glazes from Samarkand from the 13th century (Mongolian period) have mineral natron flux characteristics, but samples from the 15th century (Timurid period) show plant ash signature. Alkali fluxed Uzbek glazes from Bukhara from the 16th century (Sheibanid dynasty) are also made by plant ash flux and are subdivided into two groups with high and low sodium oxide content. The Afghan alkali glazes have sodium oxide contents similar to the sodium-poor Uzbek subgroup, which points to a possible exchange of glaze makers or glaze making technology from Uzbekistan and Afghanistan in the 15th-17th century. Regarding the extensive exchange of Timurid craftsmen in Central Asia, this option seems to be even more likely (Golombek, 1996). One sample from the 15th century from Afghanistan with mineral natron reveals that this material was parallel used in these centuries. Concerning the colouring of the glazes, it has to be distinguished between pigments and colouring ions which are incorporated in the glassy matrix. The colouring agents for translucent glazes are cations of various transition metals. As ions, Co2+ (blue), Cu2+ (green in a lead rich matrix), Fe3+ (brown/black), Mn4+ (brown/black) and Mn3+ (violet) are determined by EPMA. For opaque yellow, white, and turquoise glazes, different pigments were used. The crystalline pigments are investigated by a µ XRD2 device with the result of SnO2, SiO2, and PbSiO4 as whitening agents. PbSiO4 and Pb2Sn2O6 are found in the yellow glaze, from which only the lead tin oxide causes the yellow colour. In the black glazes, different Cr-rich pigments, Cu-Cr-Mn-oxides and iron containing clinopyroxenes are found, even in samples of the same period and region. Cr-rich particles are also detected in two turquoise Afghan glazes from the 15th and 16th century. The use of the ions of Fe, Cu, Co, Cr, and Mn seems to be widely common in the Islamic glazes and corresponds to the described colouring agents in e.g. the study of Tite (2011). The use of opacifying SnO2 particles is widespread as it is reported from different Islamic glazes from Iraq, Iran, Egypt, and Syria (Henshaw, 2010; O´Kane, 2011; Tite, 2011). The colouring agents are known already from former, e.g. Egyptian, Roman and pre-islamic periods, but especially SnO2 pigments became increasingly widespread in the Islamic glazing tradition. The use of yellow and black pigments instead varies already within the buildings from Bukhara from Cr crystals and clino-pyroxenes in the mosque Khoja Zainuddin to a Cu-Cr-Mn-oxide in the madrassa Mir-i Arab of the same epoch. Regarding the matrix compositions connected with the colouring, a certain assignment within the different locations and epochs can be seen. It is noticeable that e.g. the content of lead in turquoise glazes in Uzbekistan is in the range of 0.0-9.2 wt\% Pb, whereas blue glazes are mostly alkali ones with PbO contents <2.0 wt\%. The turquoise glazes show, that this restriction is not influenced by any defaults of availability and processability. The assumption of common addition of lead and tin to the glaze, which is already described for Iranian glazes of the 13th century (Allan et al., 1973) cannot be confirmed by correlations of tin and lead oxide in the compositions. 11.2 Portable XRF measurement With the p-XRF, semi-quantitative information about the major element compositions is generated. The depth of the detectable signals depends on the analysed sample setup. The p-XRF data are collected with the XL3 Hybrid device of the company Analyticon Instruments. In the comparison of p-XRF results of the "mining" program from Uzbek glazes with EPMA results, the same major composition groups can be distinguished. The Moroccan glazes, all lead rich, are measured with the "mining" as well as with the "soil" program, revealing a better performance in the "mining" measurements. The deviations are nevertheless high, because of the high lead contents, which make the calculation of matrix correction difficult. The measurement of the colouring oxides MnO2, CoO, and CuO is satisfying with the internal calibration of the device and even improved with the "mining" program measurement, if compared to the results of the "soil" program. The measurements of glaze imitations lead to better results than that of bulk glass. This can be attributed to the smoother surface texture. In spite of the accuracy limits in the measurements of particular elements in glazes, the classification of flux composition into three groups could be confirmed with the p XRF analysis. The measurement precision is therefore sufficient for the semi-quantitative analysis of the flux characteristic of glazes. Especially for the on-site measurement of large sample quantities on historical buildings, the device is a suitable tool. 11.3 Restoration material The ORMOCER® fulfils the requirements of stability, reversibility, and transparency, which are imposed to a modern restoration material. As pigments, historically coloured glass, cobalt blue, Egyptian blue, lead tin yellow, manganese violet, iron oxide, copper oxide, and cassiterite were used. The metal compounds have higher colour intensities than the pigments of coloured glass. It has to be considered that the proportion of ORMOCER® in the batch must be high enough (70 vol\%) to guarantee the ORMOCER® properties of weathering and mechanical stability. The adhesion properties of the ORMOCER® and the homogeneity of the mixture are the best in a fraction of max. 30 vol\% particles per ORMOCER®. With integrated particles, the ORMOCER® G materials show homogeneous coatings, whereas the particles in the ORMCOER® E show more agglomeration. In the sedimentation and weathering experiments, the use of an ultrasonic finger in combination with a roller mill is favourable compared to the treatment with bead grinding mill. The treatments with ultrasonic finger and roller mill result in less sedimentation and better adhesion of the dispersions. The treatment of the dispersions in the bead grinding mill does not result in sufficient adhesion, certainly due to the sedimentation behaviour and a congregation of particles on the bottom of the coating. The modification of dispersed nano-particles by 3-methacryl-oxypropyltrimethoxysilan leads to a further homogenization in the sedimentation tests. It is therefore approved for the use in coloured glaze supplements. In weathered coatings of nano-particle compounds, the surface modification shows certainly no enhancement of stability. The treatment of pigmented coatings with an additional layer of pure ORMOCER® results in a bright and transparent appearing, which is closer to the original optical appearance of the glaze. A long-time test application on a historical building will be the next step to validate the suitability of the restoration material.},
  subject      = {Glasur},
  language  = {en}
}
@phdthesis{Koch2016,
  author    = {Koch, Federico Juan},
  title     = {Structure-Dependent Ultrafast Relaxation Dynamics in Multichromophoric Systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136306},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Time-resolved spectroscopy allows for analyzing light-induced energy conversion and chromophore-chromophore interactions in molecular systems, which is a prerequisite in the design of new materials and for improving the efficiency of opto-electronic devices. To elucidate photo-induced dynamics of complex molecular systems, transient absorption (TA) and coherent two-dimensional (2D) spectroscopy were employed and combined with additional experimental techniques, theoretical approaches, and simulation models in this work. A systematic series of merocyanines, synthetically varied in the number of chromophores and subsitution pattern, attached to a benzene unit was investigated in cooperation with the group of Prof. Dr. Frank W{\"u}rthner at the University of W{\"u}rzburg. The global analysis of several TA experiments, and additional coherent 2D spectroscopy experiments, provided the basis to elaborate a relaxation scheme which was applicable for all merocyanine systems under investigation. This relaxation scheme is based on a double minimum on the excited-state potential energy surface. One of these minima is assigned to an intramolecular charge-transfer state which is stabilized in the bis- and tris-chromophoric dyes by chromphore-chromophore interactions, resulting in an increase in excited-state lifetime. Electro-optical absorption and density functional theory (DFT) calculations revealed a preferential chromophore orientation which compensates most of the dipole moment of the individual chromophores. Based on this structural assignment the conformationdependent exciton energy splitting was calculated. The linear absorption spectra of the multi-chromophoric merocyanines could be described by a combination of monomeric and excitonic spectra. Subsequently, a structurally complex polymeric squaraine dye was studied in collaboration with the research groups of Prof. Dr. Christoph Lambert and Prof. Dr. Roland Mitric at the University of W{\"u}rzburg. This polymer consists of a superposition of zigzag and helix structures depending on the solvent. High-level DFT calculations confirmed the previous assignment that zigzag and helix structures can be treated as J- and H-aggregates, respectively. TA experiments revealed that in dependence on the solvent as well as the excitation energy, ultrafast energy transfer within the squaraine polymer proceeds from initially excited helix segments to zigzag segments or vice versa. Additionally, 2D spectroscopy confirmed the observed sub-picosecond dynamics. In contrast to other conjugated polymers such as MEH-PPV, which is investigated in the last chapter, ultrafast energy transfer in squaraine polymers is based on the matching of the density of states between donor and acceptor segments due to the small reorganization energy in cyanine-like chromophores. Finally, the photo-induced dynamics of the aggregated phase of the conjugated polymer MEH-PPV was investigated in cooperation with the group of Prof. Dr. Anna K{\"o}hler at the University of Bayreuth. Our collaborators had previously described the aggregation of MEH-PPV upon cooling by the formation of so-called HJ-aggregates based on exciton theory. By TA measurements and by making use of an affiliated band analysis distinct relaxation processes in the excited state and to the ground state were discriminated. By employing 2D spectroscopy the energy transfer between different conjugated segments within the aggregated polymer was resolved. The initial exciton relaxation within the aggregated phase indicates a low exciton mobility, in contrast to the subsequent energy transfer between different chromophores within several picoseconds. This work contributes by its systematic study of structure-dependent relaxation dynamics to the basic understanding of the structure-function relationship within complex molecular systems. The investigated molecular classes display a high potential to increase efficiencies of opto-electronic devices, e.g., organic solar cells, by the selective choice of the molecular morphology.},
  subject      = {Femtosekundenspektroskopie},
  language  = {en}
}
@phdthesis{Zott2016,
  author    = {Zott, Maximilian},
  title     = {Extreme Value Theory in Higher Dimensions - Max-Stable Processes and Multivariate Records},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136614},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Die Extremwerttheorie behandelt die stochastische Modellierung seltener und extremer Ereignisse. W{\"a}hrend fundamentale Theorien in der klassischen Stochastik, wie etwa die Gesetze der großen Zahlen oder der zentrale Grenzwertsatz das asymptotische Verhalten der Summe von Zufallsvariablen untersucht, liegt in der Extremwerttheorie der Fokus auf dem Maximum oder dem Minimum einer Menge von Beobachtungen. Die Grenzverteilung des normierten Stichprobenmaximums unter einer Folge von unabh{\"a}ngigen und identisch verteilten Zufallsvariablen kann durch sogenannte max-stabile Verteilungen charakterisiert werden. In dieser Dissertation werden verschiedene Aspekte der Theorie der max-stabilen Zufallsvektoren und stochastischen Prozesse behandelt. Insbesondere wird der Begriff der 'Differenzierbarkeit in Verteilung' eines max-stabilen Prozesses eingef{\"u}hrt und untersucht. Ferner werden 'verallgemeinerte max-lineare Modelle' eingef{\"u}hrt, um einen bekannten max-stabilen Zufallsvektor durch einen max-stabilen Prozess zu interpolieren. Dar{\"u}ber hinaus wird der Zusammenhang von extremwerttheoretischen Methoden mit der Theorie der multivariaten Rekorde hergestellt. Insbesondere werden sogenannte 'vollst{\"a}ndige' und 'einfache' Rekorde eingef{\"u}hrt, und deren asymptotisches Verhalten untersucht.},
  subject      = {Stochastischer Prozess},
  language  = {en}
}
@phdthesis{Gershberg2016,
  author    = {Gershberg, Jana},
  title     = {Self-assembled Perylene Bisimide Dimers and their Interaction with Double-stranded DNA},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136725},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The self-assembly of molecules based on π-π-interactions and hydrogen bonding is of significant importance in nature. These processes enable the formation of complex supramolecular structures with diverse functions. For the transfer of the concepts from nature to artificial supramolecular structures, a basic understanding of those processes is needed. For this purpose, π-conjugated aromatic molecules with an easy synthetic access are suitable as their functionalities can be changed effortless. Perylene bisimide (PBIs) dyes are attractive candidates since they fulfill these requirements owing to their tendency to self-assemble in solution due to their large aromatic π-surfaces. Furthermore, the changes of the optical properties (for instance absorption, emission or circular dichroism) of PBI dyes, caused by their self-assembly, are easy to study experimentally. Structural variations of PBI dyes including additional non-covalent interactions, such as hydro-gen bonding, enable to direct their self-assembly process. Thus, the formation of interesting su-pramolecular structures of PBI dyes could be realized, although, often of undefined size. The aim of this thesis was to develop strategies to restrict the aggregate size of PBI dyes. Therefore, de-fined structural features of PBI molecules were combined and a variation of external influences such as solvent and concentration included. Furthermore, DNA was utilized as a template for the limitation of the aggregate size of PBI dyes. Chapters 1 and 2 provide general information and describe examples from literature which are necessary to understand the following experimental work. The first chapter is based on the inter-actions of various molecules with DNA. Therefore, DNA is considered as a supramolecular biom-acromolecule containing specific structural and functional features to interact with small mole-cules. Afterwards, the main interaction modes of small molecules with DNA such as electrostatic interaction, intercalation and groove binding with corresponding examples are discussed. Among all techniques applied to study the interaction of ligands with DNA, UV/Vis absorption, fluores-cence and circular dichroism spectroscopy were described in detail. At the end of this chapter, examples of already pre-associated systems showing interactions with DNA are presented. The second chapter is focused on the determination and mathematic evaluation of the self-assembly processes. The simplest models such as monomer-dimer and isodesmic model are de-scribed and supplemented by examples. Furthermore, the simplest modification of the isodesmic model, the K2-K model, is presented. Additionally, experimental problems, which may arise dur-ing the investigations of the self-assembly processes, are addressed. For the description of the entire self-assembly process, a sufficiently large concentration range and an appropriate measure-ment method that is sensitive in this concentration range is necessary. Furthermore, the full transi-tion from the monomeric to the aggregated species has to be spectroscopically ascertainable. This enables an accurate mathematic evaluation of the self-assembly process and provides meaningful binding constants. The self-assembly pathway can be controlled by the variation of solvent, con-centration or temperature. However, this pathway can also be directed by a rational design of the molecular structure of the considered system. For example, a specific interplay of π-π-interactions and hydrogen bonding may promote isodesmic as well as cooperative growth into large struc-tures. The main focus of this thesis is to develop strategies to control the aggregate size of PBI dyes (Chapter 3). For this purpose, a PBI scaffold was designed which contains hydrogen bonding amide functions at the imide positions derived from the amino acid L-alanine and solubilizing side groups in the periphery (Figure 81). The variations of the residues R/R' range from didodecylox-yphenyl, didodecylphenyl, dioligo(ethylene glycol)phenyl to branched and linear alkyl chains. The most extensive study of the aggregation behavior was performed for the PBI dye 5. Concen-tration-dependent 1H NMR and UV/Vis absorption measurements clearly revealed the formation of dimers in chloroform. Further investigations by means of 2D NMR, VPO and ITC confirmed the exclusive presence of dimer aggregates of PBI 5 in the investigated concentration range. Mo-lecular modelling studies, supported by NMR and FT-IR experiments, provided structural reasons for the absence of further growth into larger aggregates. The specific combination of π-π interac-tions and hydrogen bonds between the NH groups of the amide groups and the carbonyl oxygen atoms of the PBI core are decisive for the formation of the discrete dimer stack (see Figure 82). The investigations of the aggregation behavior of PBIs 6-9 were less extensive but consistent with the results obtained for PBI 5. However, the determined binding constants vary over a considera-ble range of 1.1 x 102 M-1 (PBI 8) to 1.4 x 104 M-1 (PBI 5). These differences could be attributed to structural variations of the dyes. The electron-rich phenyl substituent promoted the aggregation tendency of PBIs 5-7 compared with 8 and 9 that carry only alkyl side chains. Thus, the π-π in-teractions of bay-unsubstituted PBI cores in combination with hydrogen bonding of the amide functions control the formation of discrete dimers of these PBI dyes. The variation of conditions, such as solvent, change the aggregation behavior of PBI dyes. In the solvents toluene and/or methylcyclohexane, anti-cooperative growth into larger aggregates of PBI 5 was observed (Chapter 4). The important feature of this self-assembly process is the absence of isosbestic points over the whole concentration range in the UV/Vis absorption measurements. The preference for the dimeric species of PBI 5 remained in both solvents as well as in mixtures of them, but upon increasing the concentration these dimers self-assemble into larger aggregates. An important feature of the self-assembly process is the preferred formation of even-numbered aggregates compared to the odd-numbered ones (see Figure 83). Although, the conventional K2-K model provides plausible binding constants, it is not capable to describe the aggregation behavior adequately, since it considers a continuous size distribution. The gradual aggregation process over dimers, tetramers, hexamers, etc. was therefore analyzed with a newly developed K2-K model for anti-cooperative supramolecular polymerization. By the global analysis of the UV/Vis absorption spectra a very good agreement between the experimental and simulated spectra, which were based on the new K2-K model, was obtained. Furthermore, the calculated UV/Vis absorption spectra of a dimer and an aggregate highlighted the most important structural differences. The absorption spectrum of the dimer still has a pronounced vibronic structure which gets lost in the spectrum of the aggregate. In another part of this work, a series of water soluble PBI dyes were described which contain similar PBI scaffolds as PBIs 5-8 (Chapter 5). These PBI dyes self-assemble into similar dimer aggregates in water due to their positively charged side chains causing electrostatic repulsion be-tween the molecules (see Figure 84). Here, however, the self-assembly behavior has not been studied thoroughly in water due to the similarities of already reported PBI dyes. Instead, the focus here is on the characterization of the interactions of these dyes with DNA/RNA. The comprehensive studies using thermal denaturation experiments showed the high stability of these PBI/polynucleotide complexes. The spermine-functionalized PBI dyes having six positive charges showed strong interactions with DNA/RNA which was expressed in a signif-icant increase of the melting temperatures of DNA/RNA (ΔTm values between 7 and > 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85).},
  subject      = {Perylentetracarbons{\"a}urederivate},
  language  = {en}
}
@phdthesis{Hackl2016,
  author    = {Hackl, Thomas},
  title     = {A draft genome for the Venus flytrap, Dionaea muscipula : Evaluation of assembly strategies for a complex Genome - Development of novel approaches and bioinformatics solutions},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133149},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The Venus flytrap, \textit{Dionaea muscipula}, with its carnivorous life-style and its highly specialized snap-traps has fascinated biologist since the days of Charles Darwin. The goal of the \textit{D. muscipula} genome project is to gain comprehensive insights into the genomic landscape of this remarkable plant. The genome of the diploid Venus flytrap with an estimated size between 2.6 Gbp to 3.0 Gbp is comparatively large and comprises more than 70 \% of repetitive regions. Sequencing and assembly of genomes of this scale are even with state-of-the-art technology and software challenging. Initial sequencing and assembly of the genome was performed by the BGI (Beijing Genomics Institute) in 2011 resulting in a 3.7 Gbp draft assembly. I started my work with thorough assessment of the delivered assembly and data. My analysis showed that the BGI assembly is highly fragmented and at the same time artificially inflated due to overassembly of repetitive sequences. Furthermore, it only comprises about on third of the expected genes in full-length, rendering it inadequate for downstream analysis. In the following I sought to optimize the sequencing and assembly strategy to obtain an assembly of higher completeness and contiguity by improving data quality and assembly procedure and by developing tailored bioinformatics tools. Issues with technical biases and high levels of heterogeneity in the original data set were solved by sequencing additional short read libraries from high quality non-polymorphic DNA samples. To address contiguity and heterozygosity I examined numerous alternative assembly software packages and strategies and eventually identified ALLPATHS-LG as the most suited program for assembling the data at hand. Moreover, by utilizing digital normalization to reduce repetitive reads, I was able to substantially reduce computational demands while at the same time significantly increasing contiguity of the assembly. To improve repeat resolution and scaffolding, I started to explore the novel PacBio long read sequencing technology. Raw PacBio reads exhibit high error rates of 15 \% impeding their use for assembly. To overcome this issue, I developed the PacBio hybrid correction pipeline proovread (Hackl et al., 2014). proovread uses high coverage Illumina read data in an iterative mapping-based consensus procedure to identify and remove errors present in raw PacBio reads. In terms of sensitivity and accuracy, proovread outperforms existing software. In contrast to other correction programs, which are incapable of handling data sets of the size of D. muscipula project, proovread's flexible design allows for the efficient distribution of work load on high-performance computing clusters, thus enabling the correction of the Venus flytrap PacBio data set. Next to the assembly process itself, also the assessment of the large de novo draft assemblies, particularly with respect to coverage by available sequencing data, is difficult. While typical evaluation procedures rely on computationally extensive mapping approaches, I developed and implemented a set of tools that utilize k-mer coverage and derived values to efficiently compute coverage landscapes of large-scale assemblies and in addition allow for automated visualization of the of the obtained information in comprehensive plots. Using the developed tools to analyze preliminary assemblies and by combining my findings regarding optimizations of the assembly process, I was ultimately able to generate a high quality draft assembly for D. muscipula. I further refined the assembly by removal of redundant contigs resulting from separate assembly of heterozygous regions and additional scaffolding and gapclosing using corrected PacBio data. The final draft assembly comprises 86 × 10 3 scaffolds and has a total size of 1.45 Gbp. The difference to the estimated genomes size is well explained by collapsed repeats. At the same time, the assembly exhibits high fractions full-length gene models, corroborating the interpretation that the obtained draft assembly provides a complete and comprehensive reference for further exploration of the fascinating biology of the Venus flytrap.},
  subject      = {Venusfliegenfalle},
  language  = {en}
}
@phdthesis{Ceymann2016,
  author    = {Ceymann, Harald},
  title     = {Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136850},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance.},
  subject      = {Squaraine},
  language  = {en}
}
@phdthesis{Merger2016,
  author    = {Merger, Juri},
  title     = {Optimal Control and Function Identification in Biological Processes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-138900},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Mathematical modelling, simulation, and optimisation are core methodologies for future developments in engineering, natural, and life sciences. This work aims at applying these mathematical techniques in the field of biological processes with a focus on the wine fermentation process that is chosen as a representative model. In the literature, basic models for the wine fermentation process consist of a system of ordinary differential equations. They model the evolution of the yeast population number as well as the concentrations of assimilable nitrogen, sugar, and ethanol. In this thesis, the concentration of molecular oxygen is also included in order to model the change of the metabolism of the yeast from an aerobic to an anaerobic one. Further, a more sophisticated toxicity function is used. It provides simulation results that match experimental measurements better than a linear toxicity model. Moreover, a further equation for the temperature plays a crucial role in this work as it opens a way to influence the fermentation process in a desired way by changing the temperature of the system via a cooling mechanism. From the view of the wine industry, it is necessary to cope with large scale fermentation vessels, where spatial inhomogeneities of concentrations and temperature are likely to arise. Therefore, a system of reaction-diffusion equations is formulated in this work, which acts as an approximation for a model including computationally very expensive fluid dynamics. In addition to the modelling issues, an optimal control problem for the proposed reaction-diffusion fermentation model with temperature boundary control is presented and analysed. Variational methods are used to prove the existence of unique weak solutions to this non-linear problem. In this framework, it is possible to exploit the Hilbert space structure of state and control spaces to prove the existence of optimal controls. Additionally, first-order necessary optimality conditions are presented. They characterise controls that minimise an objective functional with the purpose to minimise the final sugar concentration. A numerical experiment shows that the final concentration of sugar can be reduced by a suitably chosen temperature control. The second part of this thesis deals with the identification of an unknown function that participates in a dynamical model. For models with ordinary differential equations, where parts of the dynamic cannot be deduced due to the complexity of the underlying phenomena, a minimisation problem is formulated. By minimising the deviations of simulation results and measurements the best possible function from a trial function space is found. The analysis of this function identification problem covers the proof of the differentiability of the function-to-state operator, the existence of minimisers, and the sensitivity analysis by means of the data-to-function mapping. Moreover, the presented function identification method is extended to stochastic differential equations. Here, the objective functional consists of the difference of measured values and the statistical expected value of the stochastic process solving the stochastic differential equation. Using a Fokker-Planck equation that governs the probability density function of the process, the probabilistic problem of simulating a stochastic process is cast to a deterministic partial differential equation. Proofs of unique solvability of the forward equation, the existence of minimisers, and first-order necessary optimality conditions are presented. The application of the function identification framework to the wine fermentation model aims at finding the shape of the toxicity function and is carried out for the deterministic as well as the stochastic case.},
  subject      = {Optimale Kontrolle},
  language  = {en}
}
@phdthesis{Rosenbaum2016,
  author    = {Rosenbaum, Corinna},
  title     = {The role of enteric glial cells under inflammatory conditions of the intestine},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-138946},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The enteric nervous system (ENS) innervates the gastrointestinal (GI) tract and controls central aspects of GI physiology including contractility of the intestinal musculature, glandular secretion and intestinal blood flow. The ENS is composed of neurons that conduct electrical signals and of enteric glial cells (EGCs). EGCs resemble central nervous system (CNS) astrocytes in their morphology and in the expression of shared markers such as the intermediate filament protein glial fibrillary acidic protein (GFAP). They are strategically located at the interface of ENS neurons and their effector cells to modulate intestinal motility, epithelial barrier stability and inflammatory processes. The specific contributions of EGCs to the maintenance of intestinal homeostasis are subject of current research. From a clinical point of view EGC involvement in pathophysiological processes such as intestinal inflammation is highly relevant. Like CNS astrocytes ECGs can acquire a reactive, tissue-protective phenotype in response to intestinal injury. In patients with chronic inflammatory bowel diseases (IBD) such as Crohn's disease and ulcerative colitis, alterations in the EGC network are well known, particularly a differential expression of GFAP, which is a hallmark of reactive gliosis in the CNS. With increasing recognition of the role of EGCs in intestinal health and disease comes the need to study the glial population in its complexity. The overall aim of this thesis was to comprehensively study EGCs with focus on the reactive GFAP-expressing subpopulation under inflammatory conditions in vivo and in vitro. In a first step, a novel in vivo rat model of acute systemic inflammation mimicking sepsis was employed to investigate rapidly occuring responses of EGCs to inflammation. This study revealed that within a short time frame of a few hours, EGCs responded to the inflammation with an upregulation of Gfap gene expression. This inflammation-induced upregulation was confined to the myenteric plexus and varied in intensity along the intestinal rostro-caudal axis. This highly responsive myenteric GFAP-expressing EGC population was further characterized in vivo andin vitro using a transgenic mouse model (hGFAP-eGFP mice). Primary purified murine GFAP-EGC cultures in vitro were established and it was assessed how the transcriptomic and proteomic profiles of these cells change upon inflammatory stimulation. Here, myenteric GFAP-EGCs were found to undergo a shift in gene expression profile that predominantly affects expression of genes associated with inflammatory responses. Further, a secretion of inflammatory mediators was validated on protein level. The GFAP+ subpopulation is hence an active participant in inflammatory pathophysiology. In an acute murine IBD model in vivo, GFAP-EGCs were found to express components of the major histocompatibility complex (MHC) class II in inflamed tissue, which also indicates a crosstalk of EGCs with the innate and the adaptive lamina propria immune system in acute inflammation. Taken together, this work advances our knowledge on EGC (patho-)physiology by identifying and characterizing an EGC subpopulation rapidly responsive to inflammation. This study further provides the transcriptomic profile of this population in vivo and in vitro, which can be used to identify targets for therapeutic intervention. Due to the modulating influence of EGCs on the intestinal microenvironment, the study further underlines the importance of integrating EGCs into in vitro test systems that aim to model intestinal tissues in vitro and presents an outlook on a potential strategy.},
  subject      = {Darmwandnervensystem},
  language  = {en}
}
@phdthesis{Pasch2016,
  author    = {Pasch, Elisabeth},
  title     = {The role of SUN4 and related proteins in sperm head formation and fertility},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139092},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Spermiogenesis describes the differentiation of haploid germ cells into motile, fertilization-competent spermatozoa. During this fundamental transition the species-specific sperm head is formed, which necessitates profound nuclear restructuring coincident with the assembly of sperm-specific structures and chromatin compaction. In the case of the mouse, it is characterized by reshaping of the early round spermatid nucleus into an elongated sickle-shaped sperm head. This tremendous shape change requires the transduction of cytoskeletal forces onto the nuclear envelope (NE) or even further into the nuclear interior. LINC (linkers of nucleoskeleton and cytoskeleton) complexes might be involved in this process, due to their general function in bridging the NE and thereby physically connecting the nucleus to the peripheral cytoskeleton. LINC complexes consist of inner nuclear membrane integral SUN-domain proteins and outer nuclear membrane KASH-domain counterparts. SUN- and KASH-domain proteins are directly connected to each other within the perinuclear space, and are thus capable of transferring forces across the NE. To date, these protein complexes are known for their essential functions in nuclear migration, anchoring and positioning of the nucleus, and even for chromosome movements and the maintenance of cell polarity and nuclear shape. In this study LINC complexes were investigated with regard to their potential role in sperm head formation, in order to gain further insight into the processes occurring during spermiogenesis. To this end, the behavior and function of the testis-specific SUN4 protein was studied. The SUN-domain protein SUN4, which had received limited characterization prior to this work, was found to be exclusively expressed in haploid stages during germ cell development. In these cell stages, it specifically localized to the posterior NE at regions decorated by the manchette, a spermatid-specific structure which was previously shown to be involved in nuclear shaping. Mice deficient for SUN4 exhibited severely disorganized manchette residues and gravely misshapen sperm heads. These defects resulted in a globozoospermia-like phenotype and male mice infertility. Therefore, SUN4 was not only found to be mandatory for the correct assembly and anchorage of the manchette, but also for the correct localization of SUN3 and Nesprin1, as well as of other NE components. Interaction studies revealed that SUN4 had the potential to interact with SUN3, Nesprin1, and itself, and as such is likely to build functional LINC complexes that anchor the manchette and transfer cytoskeletal forces onto the nucleus. Taken together, the severe impact of SUN4 deficiency on the nucleocytoplasmic junction during sperm development provided direct evidence for a crucial role of SUN4 and other LINC complex components in mammalian sperm head formation and fertility.},
  subject      = {Maus},
  language  = {en}
}
@phdthesis{Bertho2016,
  author    = {Bertho, Sylvain},
  title     = {Biochemical and molecular characterization of an original master sex determining gene in Salmonids},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139130},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Sexual development is a fundamental and versatile process that shapes animal morphology, physiology and behavior. The underlying developmental process is composed of the sex determination and the sex differentiation. Sex determination mechanisms are extremely labile among taxa. The initial triggers of the sex determination process are often genetics called sex determining genes. These genes are expressed in the bipotential gonad and tilt the balance to a developmental program allowing the differentiation of either a testis or an ovary. Fish represent a large and fascinating vertebrate group to study both sex determination and sex differentiation mechanisms. To date, among the known sex determining genes, three gene families namely sox, dmrt and TGF-β factors govern this developmental program. As exception to this rule, sdY "sexually dimorphic on the Y" does not belong to one of these families as it comes from the duplication / evolution of an ancestor gene related to immunity, i.e., the interferon related factor 9, irf9. sdY is the master sex determining gene in salmonids, a group of fishes that include species such as rainbow trout and Atlantic salmon. The present study was aimed to firstly characterize the features of SdY protein. Results indicate that SdY is predominantly localized in the cytoplasm tested in various fish and mammalian cell lines and confirmed by different methods. Predictive in silico analysis revealed that SdY is composed of a β-sandwich core surrounded by three α-helices as well specific characteristics conferring a putative protein-protein interaction site. Secondly, the study was aimed to understand how SdY could trigger testicular differentiation. SdY is a truncated divergent version of Irf9 that has a conserved protein-protein domain but lost the DNA interaction domain of its ancestor gene. It was then hypothesized that SdY could initiate testicular differentiation by protein-protein interactions. To evaluate this we first conducted a yeast-two-hybrid screen that revealed a high proportion of transcription factors including fox proteins. Using various biochemical and cellular methods we confirm an interaction between SdY and Foxl2, a major transcription factor involved in ovarian differentiation and identity maintenance. Interestingly, the interaction of SdY with Foxl2 leads to nuclear translocation of SdY from the cytoplasm. Furthermore, this SdY translocation mechanism was found to be specific to fish Foxl2 and to a lesser extend Foxl3 and not other Fox proteins or mammalian FoxL2. In addition, we found that this interaction allows the stabilization of SdY and prevents its degradation. Finally, to better decipher SdY action we used as a model a mutated version of SdY that was identified in XY females of Chinook salmon natural population. Results show that this mutation induces a local conformation defect obviously leading to a misfolded protein and a quick degradation. Moreover, the mutated version compromised the interaction with Foxl2 defining a minimal threshold to induce testicular differentiation. Altogether results from my thesis propose that SdY would trigger testicular differentiation in salmonids by preventing Foxl2 to promote ovarian differentiation. Further research should be now carried out on how this interaction of SdY and Foxl2 acts in-vivo.},
  subject      = {Lachsartige <Familie>},
  language  = {en}
}
@phdthesis{Ulrich2016,
  author    = {Ulrich, Natalie},
  title     = {Processing of Near Outcomes and Outcome Sequences in Gambling: Implications for the Biopsychological Basis of Problem Gambling},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139612},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Gambling is a popular activity in Germany, with 40\% of a representative sample reporting having gambled at least once in the past year (Bundeszentrale f{\"u}r gesundheitliche Aufkl{\"a}rung, 2014). While the majority of gamblers show harmless gambling behavior, a subset develops serious problems due to their gambling, affecting their psychological well-being, social life and work. According to recent estimates, up to 0.8\% of the German population are affected by such pathological gambling. People in general and pathological gamblers in particular show several cognitive distortions, that is, misconceptions about the chances of winning and skill involvement, in gambling. The current work aimed at elucidating the biopsychological basis of two such kinds of cognitive distortions, the illusion of control and the gambler's and hot hand fallacies, and their modulation by gambling problems. Therefore, four studies were conducted assessing the processing of near outcomes (used as a proxy for the illusion of control) and outcome sequences (used as a proxy for the gambler's and hot hand fallacies) in samples of varying degrees of gambling problems, using a multimethod approach. The first study analyzed the processing and evaluation of near outcomes as well as choice behavior in a wheel of fortune paradigm using electroencephalography (EEG). To assess the influence of gambling problems, a group of problem gamblers was compared to a group of controls. The results showed that there were no differences in the processing of near outcomes between the two groups. Near compared to full outcomes elicited smaller P300 amplitudes. Furthermore, at a trend level, the choice behavior of participants showed signs of a pattern opposite to the gambler's fallacy, with longer runs of an outcome color leading to increased probabilities of choosing this color again on the subsequent trial. Finally, problem gamblers showed smaller feedback-related negativity (FRN) amplitudes relative to controls. The second study also targeted the processing of near outcomes in a wheel of fortune paradigm, this time using functional magnetic resonance imaging and a group of participants with varying degrees of gambling problems. The results showed increased activity in the bilateral superior parietal cortex following near compared to full outcomes. The third study examined the peripheral physiology reactions to near outcomes in the wheel of fortune. Heart period and skin conductance were measured while participants with varying degrees of gambling problems played on the wheel of fortune. Near compared to full outcomes led to increased heart period duration shortly after the outcome. Furthermore, heart period reactions and skin conductance responses (SCRs) were modulated by gambling problems. Participants with high relative to low levels of gambling problems showed increased SCRs to near outcomes and similar heart period reactions to near outcomes and full wins. The fourth study analyzed choice behavior and sequence effects in the processing of outcomes in a coin toss paradigm using EEG in a group of problem gamblers and controls. Again, problem gamblers showed generally smaller FRN amplitudes compared to controls. There were no differences between groups in the processing of outcome sequences. The break of an outcome streak led to increased power in the theta frequency band. Furthermore, the P300 amplitude was increased after a sequence of previous wins. Finally, problem gamblers compared to controls showed a trend of switching the outcome symbol relative to the previous outcome symbol more often. In sum, the results point towards differences in the processing of near compared to full outcomes in brain areas and measures implicated in attentional and salience processes. The processing of outcome sequences involves processes of salience attribution and violation of expectations. Furthermore, problem gamblers seem to process near outcomes as more win-like compared to controls. The results and their implications for problem gambling as well as further possible lines of research are discussed.},
  subject      = {Spielsucht},
  language  = {en}
}
@phdthesis{Costea2016,
  author    = {Costea, Paul Igor},
  title     = {Stratification and variation of the human gut microbiota},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139649},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The microbial communities that live inside the human gastrointestinal tract -the human gut microbiome- are important for host health and wellbeing. Characterizing this new "organ", made up of as many cells as the human body itself, has recently become possible through technological advances. Metagenomics, the high-throughput sequencing of DNA directly from microbial communities, enables us to take genomic snapshots of thousands of microbes living together in this complex ecosystem, without the need for isolating and growing them. Quantifying the composition of the human gut microbiome allows us to investigate its properties and connect it to host physiology and disease. The wealth of such connections was unexpected and is probably still underestimated. Due to the fact that most of our dietary as well as medicinal intake affects the microbiome and that the microbiome itself interacts with our immune system through a multitude of pathways, many mechanisms have been proposed to explain the observed correlations, though most have yet to be understood in depth. An obvious prerequisite to characterizing the microbiome and its interactions with the host is the accurate quantification of its composition, i.e. determining which microbes are present and in what numbers they occur. Historically, standard practices have existed for sample handling, DNA extraction and data analysis for many years. However, these were generally developed for single microbe cultures and it is not always feasible to implement them in large scale metagenomic studies. Partly because of this and partly because of the excitement that new technology brings about, the first metagenomic studies each took the liberty to define their own approach and protocols. From early meta-analysis of these studies it became clear that the differences in sample handling, as well as differences in computational approaches, made comparisons across studies very difficult. This restricts our ability to cross-validate findings of individual studies and to pool samples from larger cohorts. To address the pressing need for standardization, we undertook an extensive comparison of 21 different DNA extraction methods as well as a series of other sample manipulations that affect quantification. We developed a number of criteria for determining the measurement quality in the absence of a mock community and used these to propose best practices for sampling, DNA extraction and library preparation. If these were to be accepted as standards in the field, it would greatly improve comparability across studies, which would dramatically increase the power of our inferences and our ability to draw general conclusions about the microbiome. Most metagenomics studies involve comparisons between microbial communities, for example between fecal samples from cases and controls. A multitude of approaches have been proposed to calculate community dissimilarities (beta diversity) and they are often combined with various preprocessing techniques. Direct metagenomics quantification usually counts sequencing reads mapped to specific taxonomic units, which can be species, genera, etc. Due to technology-inherent differences in sampling depth, normalizing counts is necessary, for instance by dividing each count by the sum of all counts in a sample (i.e. total sum scaling), or by subsampling. To derive a single value for community (dis-)similarity, multiple distance measures have been proposed. Although it is theoretically difficult to benchmark these approaches, we developed a biologically motivated framework in which distance measures can be evaluated. This highlights the importance of data transformations and their impact on the measured distances. Building on our experience with accurate abundance estimation and data preprocessing techniques, we can now try and understand some of the basic properties of microbial communities. In 2011, it was proposed that the space of genus level variation of the human gut microbial community is structured into three basic types, termed enterotypes. These were described in a multi-country cohort, so as to be independent of geography, age and other host properties. Operationally defined through a clustering approach, they are "densely populated areas in a multidimensional space of community composition"(source) and were proposed as a general stratifier for the human population. Later studies that applied this concept to other datasets raised concerns about the optimum number of clusters and robustness of the clustering approach. This heralded a long standing debate about the existence of structure and the best ways to determine and capture it. Here, we reconsider the concept of enterotypes, in the context of the vastly increased amounts of available data. We propose a refined framework in which the different types should be thought of as weak attractors in compositional space and we try to implement an approach to determining which attractor a sample is closest to. To this end, we train a classifier on a reference dataset to assign membership to new samples. This way, enterotypes assignment is no longer dataset dependent and effects due to biased sampling are minimized. Using a model in which we assume the existence of three enterotypes characterized by the same driver genera, as originally postulated, we show the relevance of this stratification and propose it to be used in a clinical setting as a potential marker for disease development. Moreover, we believe that these attractors underline different rules of community assembly and we recommend they be accounted for when analyzing gut microbiome samples. While enterotypes describe structure in the community at genus level, metagenomic sequencing can in principle achieve single-nucleotide resolution, allowing us to identify single nucleotide polymorphisms (SNPs) and other genomic variants in the gut microbiome. Analysis methodology for this level of resolution has only recently been developed and little exploration has been done to date. Assessing SNPs in a large, multinational cohort, we discovered that the landscape of genomic variation seems highly structured even beyond species resolution, indicating that clearly distinguishable subspecies are prevalent among gut microbes. In several cases, these subspecies exhibit geo-stratification, with some subspecies only found in the Chinese population. Generally however, they present only minor dispersion limitations and are seen across most of our study populations. Within one individual, one subspecies is commonly found to dominate and only rarely are several subspecies observed to co-occur in the same ecosystem. Analysis of longitudinal data indicates that the dominant subspecies remains stable over periods of more than three years. When interrogating their functional properties we find many differences, with specific ones appearing relevant to the host. For example, we identify a subspecies of E. rectale that is lacking the flagellum operon and find its presence to be significantly associated with lower body mass index and lower insulin resistance of their hosts; it also correlates with higher microbial community diversity. These associations could not be seen at the species level (where multiple subspecies are convoluted), which illustrates the importance of this increased resolution for a more comprehensive understanding of microbial interactions within the microbiome and with the host. Taken together, our results provide a rigorous basis for performing comparative metagenomics of the human gut, encompassing recommendations for both experimental sample processing and computational analysis. We furthermore refine the concept of community stratification into enterotypes, develop a reference-based approach for enterotype assignment and provide compelling evidence for their relevance. Lastly, by harnessing the full resolution of metagenomics, we discover a highly structured genomic variation landscape below the microbial species level and identify common subspecies of the human gut microbiome. By developing these high-precision metagenomics analysis tools, we thus hope to contribute to a greatly improved understanding of the properties and dynamics of the human gut microbiome.},
  subject      = {Mensch},
  language  = {en}
}
@phdthesis{Schnuecke2016,
  author    = {Schn{\"u}cke, Gero},
  title     = {Arbitrary Lagrangian-Eulerian Discontinous Galerkin methods for nonlinear time-dependent first order partial differential equations},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139579},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The present thesis considers the development and analysis of arbitrary Lagrangian-Eulerian discontinuous Galerkin (ALE-DG) methods with time-dependent approximation spaces for conservation laws and the Hamilton-Jacobi equations. Fundamentals about conservation laws, Hamilton-Jacobi equations and discontinuous Galerkin methods are presented. In particular, issues in the development of discontinuous Galerkin (DG) methods for the Hamilton-Jacobi equations are discussed. The development of the ALE-DG methods based on the assumption that the distribution of the grid points is explicitly given for an upcoming time level. This assumption allows to construct a time-dependent local affine linear mapping to a reference cell and a time-dependent finite element test function space. In addition, a version of Reynolds' transport theorem can be proven. For the fully-discrete ALE-DG method for nonlinear scalar conservation laws the geometric conservation law and a local maximum principle are proven. Furthermore, conditions for slope limiters are stated. These conditions ensure the total variation stability of the method. In addition, entropy stability is discussed. For the corresponding semi-discrete ALE-DG method, error estimates are proven. If a piecewise \$\mathcal{P}^{k}\$ polynomial approximation space is used on the reference cell, the sub-optimal \$\left(k+\frac{1}{2}\right)\$ convergence for monotone fuxes and the optimal \$(k+1)\$ convergence for an upwind flux are proven in the \$\mathrm{L}^{2}\$-norm. The capability of the method is shown by numerical examples for nonlinear conservation laws. Likewise, for the semi-discrete ALE-DG method for nonlinear Hamilton-Jacobi equations, error estimates are proven. In the one dimensional case the optimal \$\left(k+1\right)\$ convergence and in the two dimensional case the sub-optimal \$\left(k+\frac{1}{2}\right)\$ convergence are proven in the \$\mathrm{L}^{2}\$-norm, if a piecewise \$\mathcal{P}^{k}\$ polynomial approximation space is used on the reference cell. For the fullydiscrete method, the geometric conservation is proven and for the piecewise constant forward Euler step the convergence of the method to the unique physical relevant solution is discussed.},
  subject      = {Galerkin-Methode},
  language  = {en}
}
@phdthesis{Macha2016,
  author    = {Macha, Bret B.},
  title     = {Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137498},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new "first generation" unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand's coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new "second generation" borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex's photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = -0.84 V, E\(_{1/2}\)(2) = -0.94 V, E\(_{1/2}\)(3) = -2.09 V, and E\(_{1/2}\)(4) = -2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/-1}\), and [(189)]\(^{-1/-2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed.},
  subject      = {Borverbindungen},
  language  = {en}
}
@phdthesis{Bankoglu2016,
  author    = {Bankoglu, Ezgi Eyl{\"u}l},
  title     = {Oxidative status and genomic damage in an obesity model},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137566},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Several cohort studies showed that obesity increases the risk of chronic disease such as T2DM, hypertension and non-alcoholic fatty liver disease and various types of cancer. Different factors were described that might be involving in these diseases in obesity. Some of these suggested factors were chronic infection, elevated free fatty acids, increased ROS formation, mitochondrial dysfunction and raised NAPDH oxidase activity. Obesity is a multifactorial disease and it is very hard to distinguish between all of these factors. In this study, we wanted to focus on the association between obesity, oxidative stress and genomic damage in kidney, liver and colon, which are the most relevant organs for cancer risk according to the cohort studies. Our findings indicated elevated oxidative stress in kidney, liver and colon together with elevated lipid, RNA and DNA oxidation in the whole body. Additionally, we were able to show increased DNA damage in kidney, liver and colon. Since obesity has become an epidemic all over the world, possible therapeutic applications such as life style changes (diet and sport), pharmacological supplements and various type of surgeries are increasing. As a second question, we focused on the effect of weight loss, which is supplied either by Roux-en-Y gastric bypass surgery or by caloric restriction designed in a way to provide the same extent of weight loss, on oxidative stress and genomic damage. Our results indicated that weight loss either by gastric bypass surgery or by caloric restriction led to reduced oxidative stress and genomic damage in kidney, liver and colon. We could not find any difference between the weight loss methods, except the DNA oxidation and repair marker urinary 8-oxodG, which was still elevated after RYGB, but not after caloric restriction. It is known that hyperinsulinemia and in the long term T2DM are among the biggest concerns in obese individuals. Since we know the mutagenic potential of elevated insulin levels from previous data in our working group, the correlation between the highly mutagenic DNA DBSs marker, γ-H2AX and the plasma insulin level was tested and the findings indicated a positive correlation. In order to demonstrate the association between insulin-related oxidative stress and genomic damage, we used in vitro and in vivo models with Pten deficiency. In this part of study, the work was focused on liver. Pten is a known negative regulator of the PI3K/Akt pathway, which is responsible for the elevated NADPH oxidase activity and mitochondrial dysfunction through elevated insulin levels. Pten inhibition or deficiency were used to sensitize the system to insulin. Non-transformed immortalized human hepatocytes were used to show the mutagenic potential of elevated insulin and these in vitro data revealed once more the link between insulin signaling, elevated oxidative stress and genomic damage. Since the metabolic function of the liver is not only due to the extent of the hepatic insulin response but is also affected by systemic interactions, a whole-body Pten haplodeficient mouse model with an additional Pten+/-/Akt2-/- group was utilized for in vivo investigation of insulin-mediated toxicity. Our findings in this model suggested that Pten deficiency alone can cause an increase in oxidative stress. HFD alone was sufficient to increase the expression of HO-1 and genomic damage significantly. Moreover, the combination (whole-body Pten haplodeficient mice fed with HFD) showed significantly elevated oxidative stress and genomic damage in mouse liver. However, Akt2 knockout could only reduce the oxidative stress and DNA damage in high fat diet fed mice significantly. All these findings demonstrated that obesity can induce oxidative stress and genomic damage. Elevated insulin levels are associated with obesity-mediated oxidative stress and genomic damage. However, the underlying mechanisms are surely multifaceted and complicated. For example, Pten as oncogene might also induce other mechanisms besides the elevation of the PI3K/Akt pathway activity. In conclusion, it is clear that oxidative stress and DNA damage are linked to obesity and that weight loss can reduce these two factors. Since DNA-damage is associated with an elevated cancer risk, it might be logical to use an antioxidant therapy in obese individuals to reduce the side effects and oxidative stress dependent mutagenicity and cancer risk in these individuals. However, much more research will be needed to support this idea experimentally.},
  subject      = {{\"U}bergewicht},
  language  = {en}
}
@phdthesis{Yadav2016,
  author    = {Yadav, Preeti},
  title     = {Studying Neuronal Cytoskeleton Defects and Synaptic Defects in Mouse Model of Amyotrophic Lateral Sclerosis and Spinal Muscular Atrophy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-138093},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Amyotrophic lateral sclerosis and spinal muscular atrophy are the two most common motoneuron diseases. Both are characterized by destabilization of axon terminals, axon degeneration and alterations in neuronal cytoskeleton. Accumulation of neurofilaments has been observed in several neurodegenerative diseases but the mechanisms how elevated neurofilament levels destabilize axons are unknown so far. Here, I show that increased neurofilament expression in motor nerves of pmn mutant mice causes disturbed microtubule dynamics. Depletion of neurofilament by Nefl knockout increases the number and regrowth of microtubules in pmn mutant motoneurons and restores axon elongation. This effect is mediated by interaction of neurofilament with the stathmin complex. Depletion of neurofilament increases stathmin-Stat3 interaction and stabilizes the microtubules. Consequently, the axonal maintenance is improved and the pmn mutant mice survive longer. We propose that this mechanism could also be relevant for other neurodegenerative diseases in which neurofilament accumulation is a prominent feature. Next, using Smn-/-;SMN2 mouse as a model, the molecular mechanism behind synapse loss in SMA is studied. SMA is characterized by degeneration of lower α-motoneurons in spinal cord; however, how reduction of ubiquitously expressed SMN leads to MN-specific degeneration remains unclear. SMN is involved in pre-mRNA splicing (Pellizzoni, Kataoka et al. 1998) and its deficiency in SMA affects the splicing machinery. Neuromuscular junction denervation precedes neurodegeneration in SMA. However, there is no evidence of a link between aberrant splicing of transcripts downstream of Smn and reduced presynaptic axon excitability observed in SMA. In this study, we observed that expression and splicing of Nrxn2, that encodes a presynaptic protein is affected in the SMA mouse and that Nrxn2 could be a candidate that relates aberrant splicing to synaptic motoneuron defects in SMA.},
  subject      = {Neurofilament},
  language  = {en}
}
@phdthesis{Asmus2016,
  author    = {Asmus, Elisabeth},
  title     = {Mode of Action of Adjuvants for Foliar Application},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-138159},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Adjuvants are compounds added to an agrochemical spray formulation to improve or modify the action of an active ingredient (AI) or the physico-chemical characteristics of the spray liquid. Adjuvants can have more than only one distinct mode of action (MoA) during the foliar spray application process and they are generally known to be the best tools to improve agrochemical formulations. The main objective for this work was to elucidate the basic MoA of adjuvants by uncoupling different aspects of the spray application. Laboratory experiments, beginning from retention and spreading characteristics, followed by humectant effects concerning the spray deposit on the leaf surface and ultimately the cuticular penetration of an AI, were figured out to evaluate overall in vivo effects of adjuvants which were also obtained in a greenhouse spray test. For this comprehensive study, the surfactant classes of non-ionic sorbitan esters (Span), polysorbates (Tween) and oleyl alcohol polyglycol ether (Genapol O) were generally considered because of their common promoting potential in agrochemical formulations and their structural diversity. The reduction of interfacial tension is one of the most crucial physico-chemical properties of surfactants. The dynamic surface tension (DST) was monitored to characterise the surface tension lowering behaviour which is known to influence the droplet formation and retention characteristics. The DST is a function of time and the critical time frame of droplet impact might be at about 100 ms. None of the selected surfactants were found to lower the surface tension sufficiently during this short timeframe (chapter I). At ca. 100 ms, Tween 20 resulted in the lowest DST value. When surfactant monomers are fully saturated at the droplet-air-interface, an equilibrium surface tension (STeq) value can be determined which may be used to predict spreading or run-off effects. The majority of selected surfactants resulted in a narrow distribution of STeq values, ranging between 30 and 45 mN m- 1. Nevertheless, all surfactants were able to decrease the surface tension considerably compared to pure water (72 mN m- 1). The influence of different surfactants on the wetting process was evaluated by studying time-dependent static contact angles on different surfaces and the droplet spread area on Triticum aestivum leaves after water evaporation. The spreading potential was observed to be better for Spans than for Tweens. Especially Span 20 showed maximum spreading results. To transfer laboratory findings to spray application, related to field conditions, retention and leaf coverage was measured quantitatively on wheat leaves by using a variable track sprayer. Since the retention process involves short time dynamics, it is well-known that the spray retention on a plant surface is not correlated to STeq but to DST values. The relationship between DST at ca. 100 ms and results from the track sprayer showed increasing retention results with decreasing DST, whereas at DST values below ca. 60 mN m- 1 no further retention improvement could be observed. Under field conditions, water evaporates from the droplet within a few seconds to minutes after droplet deposition on the leaf surface. Since precipitation of the AI must essentially being avoided by holding the AI in solution, so-called humectants are used as tank-mix adjuvants. The ability of pure surfactants to absorb water from the surrounding atmosphere was investigated comprehensively by analysing water sorption isotherms (chapter II). These isotherms showed an exponential shape with a steep water sorption increase starting at 60\% to 70\% RH. Water sorption was low for Spans and much more distinct for the polyethoxylated surfactants (Tweens and Genapol O series). The relationship between the water sorption behaviour and the molecular structure of surfactants was considered as the so-called humectant activity. With an increasing ethylene oxide (EO) content, the humectant activity increased concerning the particular class of Genapol O. However, it could be shown that the moisture absorption across all classes of selected surfactants correlates rather better with their hydrophilic-lipophilic balance values with the EO content. All aboveground organs of plants are covered by the cuticular membrane which is therefore the first rate limiting barrier for AI uptake. In vitro penetration experiments through an astomatous model cuticle were performed to study the effects of adjuvants on the penetration of the lipophilic herbicide Pinoxaden (PXD) (chapter III). In order to understand the influence of different adjuvant MoA like humectancy, experiments were performed under three different humidity levels. No explicit relationship could be found between humidity levels and the PXD penetration which might be explained by the fact that humidity effects would rather affect hydrophilic AIs than lipophilic ones. Especially for Tween 20, it became obvious that a complex balance between multiple MoA like spreading, humectancy and plasticising effects have to be considered. Greenhouse trials, focussing the adjuvant impact on in vivo action of PXD, were evaluated on five different grass-weed species (chapter III). Since agrochemical spray application and its following action on living plants also includes translocation processes in planta and species dependent physiological effects, this investigation may help to simulate the situation on the field. Even though the absolute weed damage was different, depending both on plant species and also on PXD rates, adjuvant effects in greenhouse experiments displayed the same ranking as in cuticular penetration studies: Tween 20 > Tween 80 > Span 20 ≥ Span 80. Thus, the present work shows for the first time that findings obtained in laboratory experiments can be successfully transferred to spray application studies on living plants concerning adjuvant MoA. A comparative analysis, using radar charts, could demonstrate systematic derivations from structural similarities of adjuvants to their MoA (summarising discussion and outlook). Exemplarily, Tween 20 and Tween 80 cover a wide range of selected variables by having no outstanding MoA improving one distinct process during foliar application, compared to non-ethoxylated Span 20 and Span 80 which primarily revealed a surface active action. Most adjuvants used in this study represent polydisperse mixtures bearing a complex distribution of EO and aliphatic chains. From this study it seems alike that adjuvants having a wide EO distribution offer broader potential than adjuvants with a small EO distribution. It might be a speculation that due to this broad distribution of single molecules, all bearing their individual specific physico-chemical nature, a wide range of properties concerning their MoA is covered.},
  subject      = {Adjuvans},
  language  = {en}
}
@phdthesis{Kutscher2016,
  author    = {Kutscher, Marika},
  title     = {Novel Approaches to Antimicrobial Therapy of Pneumonia using Antibiotics and Therapeutic Antibodies},
  edition   = {1. Aufl.},
  publisher = {Verlag Dr. Hut},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8439-2784-0},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-138475},
  school      = {Universit{\"a}t W{\"u}rzburg},
  pages     = {176},
  year      = {2016},
  abstract  = {Nosocomial pneumonia is mostly caused by methicillin-resistant Staphylococcus aureus (MRSA). However, the standard antibiotic therapy is affected by increasing emergence of bacterial resistance. Therefore, novel therapeutic options are in high demand. New antimicrobial agents alone cannot handle the problem of increasing bacterial resistance but innovative drug delivery strategies and fast identification of infection causing pathogens are required to diminish bacterial resistance development. A very promising approach to improve the therapy of pneumonia is presented by local drug delivery to the lung. This application method enables high local drug concentrations in the lung leading to shorter application of antibiotics and hence reduces the risk of resistance development. Furthermore, the systemic concentration is lowered reducing the emergence of adverse effects. Therefore, in this thesis several approaches to improve the therapy of MRSA pneumonia are studied. One approach to achieve an efficient local delivery of antibiotics are nano-sized drug delivery systems which enable the nebulization of poorly-soluble antibiotics and can lead to even higher local drug concentrations due to their small size since nanoparticles improve mucus penetration and decrease phagocytosis by alveolar macrophages. Here, an analytical setup was developed that facilitates the identification of optimal preparation conditions for drug polyelectrolyte nanoplexes. Another promising approach to support antimicrobial therapy of pneumonia is presented by antibody-based immunotherapy. Since the stability of the antibody and hence its therapeutic activity are endangered during production, transport, storage, and application, a stabilizing formulation was developed for hUK-66, an antibody targeting surface antigens of S. aureus. Furthermore, nebulization of this formulated monoclonal antibody was studied to enable local application. Finally, the immunotherapeutic efficacy of the nebulized hUK-66 formulation was investigated in an animal in vivo study. Furthermore, rapid identification of the infection triggering pathogen is very important. The selective detection of S. aureus was achieved using optical planar Bragg grating sensors functionalized with hUK-66. In addition, the reusability of this system was studied applying a surface functionalization based on the cross-linker SPDP which enables a reversible fixation of the antibody.},
  subject      = {Lungenentz{\"u}ndung},
  language  = {en}
}
@phdthesis{Schulz2016,
  author    = {Schulz, Robert Frank},
  title     = {A radio view of high-energy emitting AGNs},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137358},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The most energetic versions of active galactic nuclei (AGNs) feature two highly-relativistic plasma outflows, so-called jets, that are created in the vicinity of the central supermassive black hole and evolve in opposite directions. In blazars, which dominate the extragalactic gamma-ray sky, the jets are aligned close to the observer's line of sight leading to strong relativistic beaming effects of the jet emission. Radio observations especially using very long baseline interferometry (VLBI) provide the best way to gain direct information on the intrinsic properties of jets down to sub-parsec scales, close to their formation region. In this thesis, I focus on the properties of three AGNs, IC 310, PKS 2004-447, and 3C 111 that belong to the small non-blazar population of gamma-ray-loud AGNs. In these kinds of AGNs, the jets are less strongly aligned with respect to the observer than in blazars. I study them in detail with a variety of radio astronomical instruments with respect to their high-energy emission and in the context of the large samples in the monitoring programmes MOJAVE and TANAMI. My analysis of radio interferometric observations and flux density monitoring data reveal very different characteristics of the jet emission in these sources. The work presented in this thesis illustrates the diversity of the radio properties of gamma-ray-loud AGNs that do not belong to the dominating class of blazars.},
  subject      = {Aktiver galaktischer Kern},
  language  = {en}
}
@phdthesis{Pasold2016,
  author    = {Pasold, Christian},
  title     = {QCD and electroweak NLO corrections to W + Photon and Z + Photon production including leptonic decays},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137456},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {At a hadron collider as the LHC or the Tevatron the production of a photon in association with a leptonically decaying vector boson represents an important class of processes. These processes stand out due to a very clean signal of a photon and two leptons. Furthermore they provide direct access to the photon-vector-boson couplings and thus an easy opportunity to test the gauge sector of the Standard Model. Within the scope of this work we present a full calculation of the next-to-leading-order corrections which include the O (αs) corrections of the strong interaction as well as the electroweak corrections of O (α) including all photon-induced contributions. For the creation of matrix elements we use methods based on Feynman diagrams. The IR singularities are treated with the dipole subtraction technique. In order to separate photons from jets, a quark-to-photon fragmentation function ´a la Glover / Morgan or Frixione's cone isolation is employed. Moreover, two different scenarios for charged leptons in the fi state were considered. The fi scenario for dressed leptons assumes that a charged lepton and a photon will be recombined if they are collinear. In the second scenario for bare muons it is assumed that leptons and photon can be separated in a detector also if they are collinear. For our calculation we implemented all corrections into a fl Monte Carlo program. Be- sides the computation of the total cross section this program is also able to generate diff tial distributions of several experimentally motivated observables. Apart from the expected large electroweak corrections in the high transverse-momentum regions and sizeable corrections in the resonance regions of the transverse or the invariant masses we found photon-induced corrections up to several 10\% for high transverse momenta. Within run I at the LHC for 7/8 TeV the experimental accuracy for Vγ production was roughly 10\%. Due to the higher luminosity at run II this accuracy will be reduced to the level of a few percent so that corrections of the same order within the theoretical predictions might become relevant. In this work we present results for the total cross section at the LHC for 7, 8 and 14 TeV and the corresponding distributions for 14 TeV.},
  subject      = {Quantenchromodynamik},
  language  = {en}
}
@phdthesis{Eck2016,
  author    = {Eck, Saskia},
  title     = {The impact of thermogenetic depolarizations of specific clock neurons on Drosophila melanogaster's circadian clock},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137118},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The rotation of the earth around its own axis determines periodically changing environmental conditions, like alterations in light and temperature. For the purpose of adapting all organisms' behavior, physiology and metabolism to recurring changes, endogenous clocks have evolved, which allow the organisms to anticipate environmental changes. In chronobiology, the scientific field dealing with the investigation of the underlying mechanisms of the endogenous clock, the fruit fly Drosophila melanogaster serves as a beneficial model organism. The fruit fly's circadian clock exhibits a rather simple anatomical organization, but nevertheless constitutes homologies to the mammalian system. Thus also in this PhD-thesis the fruit fly was used to decipher general features of the circadian clock's interneuronal communication. Drosophila melanogaster's circadian clock consists of about 150 clock neurons, which are located in the central nervous system of the fly. These clock neurons can be subdivided regarding to their anatomical position in the brain into the dorsal neurons (DN1s, DN2s, DN3s), as well as into the lateral neurons (LPNs, LNds, s-LNvs, l-LNvs). Functionally these clock neuron clusters can be classified as Morning- and Evening oscillators (M- and E- oscillators), driving different parts of the fly's locomotor activity in light-dark conditions (LD). The Morning-oscillators are represented by the s-LNvs and are known to be the main pacemakers, driving the pace of the clock in constant conditions (constant darkness; DD). The group of Evening-oscillators consists of the LNds, the DN1s and the 5th s-LNv and is important for the proper timing of the evening activity in LD. All of these clock neurons are not functionally independent, but form complex neuronal connections, which are highly plastic in their response to different environmental stimuli (Zeitgebers), like light or temperature. Even though a lot is known about the function and the importance of some clock neuron clusters, the exact interplay between the neurons is not fully known yet. To investigate the mechanisms, which are involved in communication processes among different clock neurons, we depolarized specific clock cells in a temporally and cell-type restricted manner using dTrpA1, a thermosensitive cation channel, which allows the depolarization of neurons by application of temperature pulses (TP) above 29°C to the intact and freely moving fly. Using different clock specific GAL4-driver lines and applying TPs at different time points within the circadian cycle in DD enabled us with the help of phase shift experiments to draw conclusions on the properties of the endogenous clock. The obtained phase shifts in locomotor behavior elicited by specific clock neuronal activation were plotted as phase response curves (PRCs). The depolarization of all clock neurons shifted the phase of activity the strongest, especially in the delay zone of the PRC. The exclusive depolarization of the M oscillators together with the l-LNvs (PDF+ neurons: s-LNvs \& l-LNvs) caused shifts in the delay and in the advance zone as well, however the advances were severely enhanced in their temporal occurrence ranging into the subjective day. We concluded that light might have inhibitory effects on the PDF+ cells in that particular part of the PRC, as typical light PRCs do not exhibit that kind of distinctive advances. By completely excluding light in the PRC-experiments of this PhD-thesis, this photic inhibitory input to the PDF+ neurons is missing, probably causing the broadened advance zone. These findings suggest the existence of an inhibitory light-input pathway to the PDF+ cells from the photoreceptive organs (Hofbauer-Buchner eyelet, photoreceptor cells of compound eyes, ocelli) or from other clock neurons, which might inhibit phase advances during the subjective day. To get an impression of the molecular state of the clock in the delay and advance zone, staining experiments against Period (PER), one of the most important core clock components, and against the neuropeptide Pigment Dispersing Factor (PDF) were performed. The cycling of PER levels mirrored the behavioral phase shifts in experimental flies, whereas the controls were widely unaffected. As just those neurons, which had been depolarized, exhibited immediate shifted PER oscillations, this effect has to be rapidly regulated in a cell-autonomous manner. However, the molecular link between clock neuron depolarization and shifts in the molecular clock's cycling is still missing. This issue was addressed by CREB (cAMP responsive element binding protein) quantification in the large ventrolateral neurons (l-LNvs), as these neurons responded unexpectedly and strongest to the artificial depolarization exhibiting a huge increase in PER levels. It had been previously suggested that CREB is involved in circadian rhythms by binding to regulatory sequences of the period gene (Belvin et al., 1999), thus activating its transcription. We were able to show, that CREB levels in the l-LNvs are under circadian regulation, as they exhibit higher CREB levels at the end of the subjective night relative to the end of the subjective day. That effect was further reinforced by artificial depolarization, independently of the time point of depolarization. Furthermore the data indicate that rises in CREB levels are coinciding with the time point of increases of PER levels in the l-LNvs, suggesting CREB being the molecular link between the neuronal electrical state and the molecular clock. Taking together, the results indicate that a temporal depolarization using dTrpA1 is able to significantly phase shift the clock on the behavioral and protein level. An artificial depolarization at the beginning of the subjective night caused phase delays, whereas a depolarization at the end of the subjective night resulted in advances. The activation of all clock neurons caused a PRC that roughly resembled a light-PRC. However, the depolarization of the PDF+ neurons led to a PRC exhibiting a shape that did not resemble that of a light-mediated PRC, indicating the complex processing ability of excitatory and inhibitory input by the circadian clock. Even though this experimental approach is highly artificial, just the exclusion of light-inputs enabled us to draw novel conclusions on the network communication and its light input pathways.},
  subject      = {Chronobiologie},
  language  = {en}
}
@phdthesis{Wahl2016,
  author    = {Wahl, Oliver},
  title     = {Impurity Profiling of Challenging Active Pharmaceutical Ingredients without Chromophore},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137205},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The impurity profiling of pharmaceutical ingredients can oppose many challenges. The best part of active pharmaceutical ingredients (APIs) and the related substances are detectable by UV detection, a very common detection principle. However, if an API lacks a suitable chromophore other means of detection are necessary. The corona charged aerosol detector (CAD) is a detector capable of detecting substances independent of their chemical structure. This "universal" detector has only one limitation: The analyte has to have a sufficiently low vapor pressure. Another important challenge that comes often together with the lack of a chromophore concerns the separation. These substances (e.g. most amino acids and derivatives) often contain structures that make them difficult to retain on conventional reversed phase columns. Possible solutions to overcome these challenges, like the application of the CAD and the benefit of so-called mixed-mode stationary phases in impurity profiling for pharmacopoeial purposes were explored in this work. The related substances analyzed in this thesis comprise amino acids, inorganic ions, bisphosphonic acids, basic and acidic derivatives of amino acids (esters and amides). The successful development and validation of mixed-mode liquid chromatography methods with CAD detection for carbocisteine and ibandronate sodium might help to increase the acceptance of this versatile detector in the pharmaceutical industry and in official authorities dealing with the determination of related substances. The combination of UV and CAD detection proved very useful during the analysis of Bicisate. Most of the related substances and some unidentified impurities were detectable by CAD whereas a synthesis by-product, a semi-volatile ester, was only detectable in the UV trace. The simple combination covers all relevant impurities in a single analysis. Two truly orthogonal methods regarding separation and detection for the enantiomeric purity of magnesium-L-aspartate helped to find the reason for elevated D aspartic acid content in the drug substance. A very quick and sensitive indirect separation using the OPA derivatization with NAC was developed as a powerful screening tool, whereas the direct separation of D- and L-CBQCA-Asp derivatives confirmed the results. Both methods were optimized in order to do without substances mentioned on the REACH list, like sodium tetraborate which is very frequently applied in standard derivatization protocols and CE separations. The importance of orthogonal detection principles in the determination of related substances of amino acids was discussed in a review article dealing with the revision of amino acid monographs in the Ph. Eur..},
  subject      = {Chromatographie},
  language  = {en}
}
@phdthesis{Fuchs2016,
  author    = {Fuchs, Moritz Jakob},
  title     = {Spin dynamics in the central spin model: Application to graphene quantum dots},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136079},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Due to their potential application for quantum computation, quantum dots have attracted a lot of interest in recent years. In these devices single electrons can be captured, whose spin can be used to define a quantum bit (qubit). However, the information stored in these quantum bits is fragile due to the interaction of the electron spin with its environment. While many of the resulting problems have already been solved, even on the experimental side, the hyperfine interaction between the nuclear spins of the host material and the electron spin in their center remains as one of the major obstacles. As a consequence, the reduction of the number of nuclear spins is a promising way to minimize this effect. However, most quantum dots have a fixed number of nuclear spins due to the presence of group III and V elements of the periodic table in the host material. In contrast, group IV elements such as carbon allow for a variable size of the nuclear spin environment through isotopic purification. Motivated by this possibility, we theoretically investigate the physics of the central spin model in carbon based quantum dots. In particular, we focus on the consequences of a variable number of nuclear spins on the decoherence of the electron spin in graphene quantum dots. Since our models are, in many aspects, based upon actual experimental setups, we provide an overview of the most important achievements of spin qubits in quantum dots in the first part of this Thesis. To this end, we discuss the spin interactions in semiconductors on a rather general ground. Subsequently, we elaborate on their effect in GaAs and graphene, which can be considered as prototype materials. Moreover, we also explain how the central spin model can be described in terms of open and closed quantum systems and which theoretical tools are suited to analyze such models. Based on these prerequisites, we then investigate the physics of the electron spin using analytical and numerical methods. We find an intriguing thermal flip of the electron spin using standard statistical physics. Subsequently, we analyze the dynamics of the electron spin under influence of a variable number of nuclear spins. The limit of a large nuclear spin environment is investigated using the Nakajima-Zwanzig quantum master equation, which reveals a decoherence of the electron spin with a power-law decay on short timescales. Interestingly, we find a dependence of the details of this decay on the orientation of an external magnetic field with respect to the graphene plane. By restricting to a small number of nuclear spins, we are able to analyze the dynamics of the electron spin by exact diagonalization, which provides us with more insight into the microscopic details of the decoherence. In particular, we find a fast initial decay of the electron spin, which asymptotically reaches a regime governed by small fluctuations around a finite long-time average value. Finally, we analytically predict upper bounds on the size of these fluctuations in the framework of quantum thermodynamics.},
  subject      = {Elektronenspin},
  language  = {en}
}
@phdthesis{Kesetovic2016,
  author    = {Kesetovic, Diana},
  title     = {Synthesis and biological testing of potential anti-tuberculosis drugs targeting the β-ketoacyl ACP synthase},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131301},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {With 9.6 million new cases and 1.5 million deaths in 2014, tuberculosis (TB) is alongside with AIDS the most deadly infection.‎ Foremost, the increased prevalence of resistant strains of M. tuberculosis among the TB-infected population represents a serious thread. Hence, in the last decades, novel drug targets have been investigated worldwide. So far a relatively unexplored target is the cell wall enzyme β-ketoacyl-ACP-synthase "KasA", which plays a crucial role in maintaining the membrane impermeability and hence the cell ability to resist to the immune response and drug therapy. KasA is a key enzyme in the fatty acid synthase "FAS-II" elongation cycle, responsible for the extension of the growing acyl chain within the biosynthesis of precursors for the most hydrophobic constituents of the cell wall - mycolic acids. Design of the novel KasA inhibitors, performed in the research group of Prof. Sotriffer by C. Topf and B. Schaefer, was based on the recently published crystal structure of KasA‎ in complex with its known inhibitor thiolactomycin (TLM). Considering the essential ligand-enzyme interactions, a pharmacophore model was built and applied in the virtual screening of a modified ZINC database. Selected hits with the best in silico affinity data have been reported by Topf‎ and Schaefer‎. In this work, two of the obtained hits were synthesized and their structure was systematically varied. First, a virtual screening hit, chromone-2-carboxamide derivative GS-71, was modified in the amide part. Since the most of the products possessed a very low solubility in the aqueous buffer medium used in biological assays, polar groups (nitro, succinamidyl and trimethyl-amino substituent in position 6 of the chromone ring or hydroxyl group on the benzene ring in the amide part have been inserted to the molecule. Further variations yielded diaryl ketones, diaryl ketone bearing a succinamidyl substituent, carboxamide bearing a methylpiperazinyl-4-oxobutanamido group and methyl-malonyl ester amides. Basically, the essential structural features necessary for the ligand-enzyme interactions have been maintained. The latter virtual screening hit, a pyrimidinone derivative VS-8‎ was synthesized and the structure was modified by substitution in positions 2, 4, 5 and 6 of the pyrimidine ring. Due to autofluorescence, detected in most of the products, this model structure was not further varied. Simultaneously, experiments on solubilization of the first chromone-2-carboxamides with cyclodextrins, cyclic oligosacharides known to form water-soluble inclusion complexes, were performed. Although the assessed solubility of the chromone 3b/DIMEB (1:3) mixture exceeded 14-fold the intrinsic one, the achieved 100 µM solubility was still not sufficient to be used as a stock solution in the binding assay. The experiments with cyclodextrin in combination with DMSO were ineffective. Owing to high material costs necessary for the appropriate cyclodextrin amounts, the aim focused on structural modification of the hydrophobic products. Precise structural data have been obtained from the solved crystal structures of three chromone derivatives: the screening hit GS-71 (3b), its trimethylammonium salt (18) and 6-nitro-substituted N-benzyl-N-methyl-chromone-2-carboxamide (9i). The first two compounds are nearly planar with an anti-/trans-rotamer configuration. In the latter structure, the carboxamide bridge is bent out of the chromone plane, showing an anti-rotamer, too. Considering the relatively low partition coefficient of compound 3b (cLogP = 2.32), the compound planarity and correlating tight molecular packing might be the factors significantly affecting its poor solubility. Regarding the biological results of the chromone-based compounds, similar structure-activity correlations could be drawn from the binding assay and the whole cell activity testing on M. tuberculosis. In both cases, the introduction of a nitro group to position 6 of the chromone ring and the presence of a flexible substituent in the amide part showed a positive effect. In the binding study, the nitro group at position 4 on the N-benzyl residue was of advantage, too. The highest enzyme affinity was observed for N-(4-nitrobenzyl)-chromone-2-carboxamide 4c (KD = 34 µM), 6-nitro substituted N-benzyl-chromone-2-carboxamide 9g (KD = 40 µM) and 6‑nitro-substituted N-(4-nitrobenzyl)-chromone-2-carboxamide 9j (KD = 31 µM), which could not be attributed to the fluorescence quenching potential of the nitro group. The assay interference potential of chromones, due to a covalent binding on the enzyme sulfhydryl groups, was found to be negligible at the assay conditions. Moderate in vivo activity was detected for 6‑nitro-substituted N-benzyl-chromone-2-carboxamide 9g and its N-benzyl-N-methyl-, N‑furylmethyl-, N-cyclohexyl- and N-cyclohexylmethyl derivatives 9i, 9d, 9e, 9f, for which MIC values 20 - 40 µM were assessed. Cytotoxicity was increased in the N‑cyclohexylmethyl derivative only. None of the pyrimidine-based compounds showed activity in vivo. The affinity of the model structure, VS-8, surpassed with KD = 97 µM the assessed affinity of TLM (KD = 142 µM). Since for the model chromone compound GS-71 no reliable KasA binding data could be obtained, a newly synthesized chromone derivative 9i was docked into the KasA binding site, in order to derive correlation between the in silico and in vitro assessed affinity. For the 6‑nitro-derivative 9i a moderate in vivo activity on M. tuberculosis was obtained. The in silico predicted pKi values for TLM and 9i were higher than the corresponding in vitro results, maintaining though a similar tendency, i.e., the both affinity values for compound 9i (pKi predicted = 6.64, pKD experimental = 4.02) surpassed those obtained for TLM (pKi predicted = 5.27, pKD experimental = 3.84). Nevertheless, the experimental pKD values are considered preliminary results. The binding assay method has been improved in order to acquire more accurate data. Owing to the method development, limited enzyme batches and solubility issues, only selected compounds could be evaluated. The best hits, together with the compounds active on the whole cells of M. tuberculosis, will be submitted to the kinetic enzyme assay, in order to confirm the TLM-like binding mechanism. Regarding the in vivo testing results, no correlations could be drawn between the predicted membrane permeability values and the experimental data, as for the most active compounds 9e and 9f, a very low permeability was anticipated (0.4 and 0.7 \%, respectively). Further biological tests would be required to investigate the action- or transport mode.},
  subject      = {Tuberkelbakterium},
  language  = {en}
}
@phdthesis{Lama2016,
  author    = {Lama, Anu Kumari},
  title     = {Understanding Institutional Adaptation to Climate Change: Social Resilience and Adaptive Governance Capacities of the Nature Based Tourism Institutions in the Annapurna Conservation Area, Nepal},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-034-4 (print)},
  issn      = {0510-9833 (print)},
  doi       = {10.25972/WUP-978-3-95826-035-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131351},
  school      = {W{\"u}rzburg University Press},
  pages     = {208},
  year      = {2016},
  abstract  = {The global-local sustainable development and climate change adaptation policy, and the emerging political discourse on the value of local Adaptation, have positioned the local institutions and their governance space within the strategic enclaves of multilevel governance system. Such shifts have transformed the context for sustainable Nature Based Tourism (NBT) development and adaptation in Nepal in general, and its protected areas, in particular. The emerging institutional adaptation discourse suggests on the need to link tourism development, adaptation and governance within the sustainability concept, and also to recognize the justice and inclusive dimensions of local adaptation. However, sociological investigation of institutional adaptation, particularly at the interface between sustainability, justice and inclusive local adaptation is an undertheorized research topic. This exploratory study examined the sociological process of the institutional adaptation, especially the social resilience and adaptive governance capacities of the NBT institutions, in 7 Village Development Committees of the Mustang district, a popular destination in the Annapurna Conservation Area, Nepal. Using the sphere (a dynamic social space concept) and quality of governance as the analytical framework, the integrative adaptation as the methodological approach and the case study action research method, the study investigated and generated a holistic picture on the state of the social resilience and adaptive governance capacities of the NBT institutions. The findings show institutional social resilience capacities to be contingent on socio-political construction of adaptation knowledge and power. Factors influencing such constructions among NBT institutions include: the site and institutions specific political, economic and environmental dispositions; the associated socio-political processes of knowledge constructions and volition action; and the social relationships and interaction, operating within the spheres and at multiple governance levels. The adaptive governance capacities hinge on the institutional arrangements, the procedural aspects of adaptation governance and the governmentality. These are reflective of the diverse legal frameworks, the interiority perspective of the decision making and governance practices of the NBT institutions. In conclusion, it is argued that effective local adaptation in the Mustang district is contingent on the adaptation and institutional dynamics of the NBT institutions, consisting of the cognitive, subjective, process and procedural aspects of the adaptation knowledge production and its use.},
  subject      = {Annapurna Conservation Area},
  language  = {en}
}
@phdthesis{BolanosRosales2016,
  author    = {Bola{\~n}os-Rosales, Alejandro},
  title     = {Low Mach Number Simulations of Convective Boundary Mixing in Classical Novae},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-132863},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Classical novae are thermonuclear explosions occurring on the surface of white dwarfs. When co-existing in a binary system with a main sequence or more evolved star, mass accretion from the companion star to the white dwarf can take place if the companion overflows its Roche lobe. The envelope of hydrogen-rich matter which builds on top of the white dwarf eventually ignites under degenerate conditions, leading to a thermonuclear runaway and an explosion in the order of 1046 erg, while leaving the white dwarf intact. Spectral analyses from the debris indicate an abundance of isotopes that are tracers of nuclear burning via the hot CNO cycle, which in turn reveal some sort of mixing between the envelope and the white dwarf underneath. The exact mechanism is still a matter of debate. The convection and deflagration in novae develop in the low Mach number regime. We used the Seven League Hydro code (SLH ), which employs numerical schemes designed to correctly simulate low Mach number flows, to perform two and three- dimensional simulations of classical novae. Based on a spherically-symmetric model created with aid of a stellar evolution code, we developed our own nova model and tested it on a variety of numerical grids and boundary conditions for validation. We focused on the evolution of temperature, density and nuclear energy generation rate at the layers between white dwarf and envelope, where most of the energy is generated, to understand the structure of the transition region, and its effect on the nuclear burning. We analyzed the resulting dredge-up efficiency stemming from the convective motions in the envelope. Our models yield similar results to the literature, but seem to depend very strongly on the numerical resolution. We followed the evolution of the nuclear species involved in the CNO cycle and concluded that the thermonuclear reactions primarily taking place are those of the cold and not the hot CNO cycle. The reason behind this could be that under the conditions generally assumed for multi-dimensional simulations, the envelope is in fact not degenerate. We performed initial tests for 3D simulations and realized that alternative boundary conditions are needed.},
  subject      = {Nova},
  language  = {en}
}
@phdthesis{Weber2016,
  author    = {Weber, Stefan},
  title     = {Simulation Studies on the New Small Wheel Shielding of the ATLAS Experiment and Design and Construction of a Test Facility for Gaseous Detectors},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133084},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {In this thesis two main projects are presented, both aiming at the overall goal of particle detector development. In the first part of the thesis detailed shielding studies are discussed, focused on the shielding section of the planned New Small Wheel as part of the ATLAS detector upgrade. Those studies supported the discussions within the upgrade community and decisions made on the final design of the New Small Wheel. The second part of the thesis covers the design, construction and functional demonstration of a test facility for gaseous detectors at the University of W{\"u}rzburg. Additional studies on the trigger system of the facility are presented. Especially the precision and reliability of reference timing signals were investigated.},
  subject      = {Teilchendetektor},
  language  = {en}
}
@phdthesis{VasquezOspina2016,
  author    = {Vasquez Ospina, Juan Jose},
  title     = {Development of tools for the study of gene regulation in Trypanosoma brucei},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133996},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {The protozoan parasite Trypanosoma brucei is the causal agent of sleeping sickness and besides its epidemiological importance it has been used as model organism for the study of many aspects of cellular and molecular biology especially the post-transcriptional control of gene expression. Several studies in the last 30 years have shown the importance of mRNA processing and stability for gene regulation. In T. brucei genes are unusually arranged in polycistronic transcription units (PTUs) and a coupled process of trans-splicing and polyadenylation produces the mature mRNAs. Both processes, mRNA processing and stability, cannot completely explain the control of gene expression in the different life cycle stages analyzed in T. brucei so far. In recent years, the relevance of expression regulation at the level of translation has become evident in other eukaryotes. Therefore, in the first part of my thesis I studied the impact of translational regulation by means of a genome-wide ribosome profiling approach. My data suggest that translational efficiencies vary between life cycle stages of the parasite as well as between genes within one life cycle stage. Furthermore, using ribosome profiling I was able to identify many new putative un-annotated coding sequences and to evaluate the coding potential of upstream open reading frames (uORF). Comparing my results with previously published proteomic and RNA interference (RNAi) target sequencing (RIT-seq) datasets allowed me to validate some of the new coding sequences and to evaluate their relevance for the fitness of the parasite. In the second part of my thesis I used the transcriptomic and translatomic profiles obtained from the ribosome profiling analysis for the identification of putative non-coding RNAs (ncRNAs). These results led to the analysis of the coding potential in the regions upstream and downstream of the expressed variant surface glycoprotein (VSG), which is outlined in the third part of the results section. The region upstream of the VSG, the co-transposed region (CTR), has been implicated in an increase of the in situ switching rate upon its deletion. The ribosome profiling results indicated moderate transcription but not translation in this region. These results raised the possibility that the CTR may be transcribed into ncRNA. Therefore, in the third part of my thesis, I performed a primary characterization of the CTR-derived transcripts based on northern blotting and RACE. The results suggested the presence of a unique transcript species of about 1,200 nucleotides (nt) and polyadenylated at the 3'-end of the sequence. The deletion of the CTR sequence promoting and increase of the in situ switching rates was performed around 20 years ago by means of inserting reporter genes. With the recent development of endonuclease-based tools for genome editing, it is now possible to delete sequences in a marker-free way. In the fourth part of my thesis, I show the results on the implementation of the highly efficient genome-editing CRISPR-Cas9 system in T. brucei using episomes. As a proof of principle, I inserted the sequence coding for the enhanced green fluorescent protein (eGFP) at the end of the SCD6 coding sequence (CDS). Fluorescent cells were observed as early as two days after transfection. Therefore, after the successful set up of the CRISPR-Cas9 system it will be possible to modify genomic regions with more relevance for the biology of the parasite, such as the substitution of codons present in gene tandem arrays. The implementation of ribosome profiling in T. brucei opens the opportunity for the study of translational regulation in a genome-wide scale, the re-annotation of the currently available genome, the search for new putative coding sequences, the detection of putative ncRNAs, the evaluation of the coding potential in uORFs and the role of unstranslated regions (UTRs) in the regulation of translation. In turn, the implementation of the CRISPR-Cas9 system offers the possibility to manipulate the genome of the parasite at a nucleotide resolution and without the need of including resistant makers. The CRISPR-Cas9 system is a powerful tool for editing ncRNAs, UTRs, multicopy gene families and CDSs keeping their endogenous UTRs. Moreover, the system can be used for the modification of both alleles after just one round of transfection and of codons coding for amino acids carrying post-translational modifications (PTMs) among other possibilities.    },
  subject      = {Trypanosoma brucei},
  language  = {en}
}
@phdthesis{Herweg2016,
  author    = {Herweg, Andreas},
  title     = {Beyond the state of the art, towards intuitive and reliable non-visual Brain-Computer-Interfacing},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133447},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {For the present work three main goals were formulated: goal 1 To design a tactile BCI used for mobility which is intuitive (G1.1), reliable and fast while being usable by participants aged 50 years and above. goal 2 To design an auditory BCI used for communication which is intuitive and reliable. goal 3 To examine the effects of training on tactile and auditory BCI performance. Three studies were performed to achieve these goals. In the first study nine participants aged above 50 years performed a five-session training after which eight participants were able to navigate a virtual wheelchair with mean accuracy above 95\% and an ITR above 20 bits / min. In the second study 15 participants, four of them endusers with motor-impairment, were able to communicate meaningful with high accuracies using an auditory BCI. In the third study nine healthy and nine visually impaired participants (regarded as sensory experts for non-visual perception) performed tactile, auditory and visual (for healthy participants only) copy tasks. Participants with trained perception significantly outperformed control participants for tactile but not for auditory performance. Tactile performance of sensory experts was on equal levels as the visual performance of control participants. We were able to demonstrate viability of intuitive gazeindependent tactile and auditory BCI. Our tactile BCI performed on levels similar to those of visual BCI, outperforming current tactile BCI protocols. Furthermore, we were able to demonstrate significant beneficial effect of training on tactile BCI performance. Our results demonstrate previously untapped potential for tactile BCI and avenues for future research in the field of gaze-independent BCI.},
  subject      = {Gehirn-Computer-Schnittstelle},
  language  = {en}
}
@phdthesis{Schuster2016,
  author    = {Schuster, Ann-Christin},
  title     = {Chemical and functional analyses of the plant cuticle as leaf transpiration barrier},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133475},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Cuticles cover all above-ground primary plant organs and are lipoid in nature consisting of a cutin matrix with cuticular waxes embedded within or deposited on its surface. The foremost function of the plant cuticle is the limitation of transpirational water loss into the surrounding atmosphere. Transpiration of water vapour from plants differs between stomatal and cuticular transpiration. Stomatal closure minimises the stomatal water loss and the remaining, much lower water transpiration occurs through the plant cuticle. Temperature influence on the transpiration barrier properties of intact leaves is not yet known, despite the importance of the cuticular transpiration especially under drought and heat conditions. The present study focuses on the temperature-dependent minimum water permeability of whole leaves, in comparison to the temperature effect on the cuticular permeance of isolated, astomatous cuticles (Chapter I - III). The minimum water permeability was determined gravimetrically from leaf drying curves and represents the cuticular water permeability of intact, stomatous leaves under conditions of complete stomatal closure. The temperature effect on the transpiration barrier of the desert plant Rhazya stricta and the Mediterranean sclerophyll Nerium oleander exposed a continuous increase of minimum water permeabilities with an increase in temperature. In contrast to other published studies, no abrupt and steep increase of the water permeability at high temperatures was detected. This steep increase indicates structural changes of the barrier properties of isolated cuticular membranes with a drastic decrease of efficiency. A stabilising impact of the cell wall on the plant cuticle of intact leaves was proposed. This steadying effect was confirmed with different experimental approaches measuring the cuticular water permeability of Prunus laurocerasus intact leaves. Physiological analysis of water transport on isolated, astomatous leaf cuticles indicated a drastic decline of the barrier properties at elevated temperatures for Prunus laurocerasus but not for Nerium oleander. Cuticular components were quantitatively and qualitatively analysed by gas chromatography with a flame ionisation detector and a mass spectrometric detector, respectively. A high accumulation of pentacyclic triterpenoids as cuticular wax components in relation to the cutin monomer coverage was detected for Nerium oleander and for Rhazya stricta leaves, too. Accordingly, reinforcing of the cutin matrix by triterpenoids was proposed to improve the mechanical strength and to reduce the extensibility of plant cuticles. Thus, structural changes of the cuticular barrier properties were potentially suppressed at elevated temperatures. The function of the cuticular wax amount and/or wax composition and its relation with the cuticular water permeability remains to be elucidated. In the second part of this work the cuticular wax quantity and quality as well as its impact on the transpiration barrier properties was analysed in order to deduce a potential relation between chemistry and function of plant cuticles (Chapter IV - V). Chemical analyses of the cuticular wax components of a wide range of plant species, including one tropical (Vanilla planifolia), temperate (Juglans regia, Plantago lanceolata), Mediterranean (Nerium oleander, Olea europaea) and one desert (Rhazya stricta) plant species, were conducted. The cuticular wax compositions of nine characteristic plant species from xeric limestone sites naturally located in Franconia (Southern Germany) were determined for the first time. The corresponding minimum or cuticular water permeabilities of both stomatous and astomatous leaf surfaces were measured to detect a potential relationship between the cuticular wax amount, wax composition and the cuticular barrier properties. It was demonstrated that abundant cuticular wax amounts did not constitute more efficient transpiration barriers. However, 55\% of the cuticular barrier function can be attributed to the very-long-chain aliphatic wax coverages. These new findings provide evidence that the acyclic wax constituents play a pivotal role establishing efficient transpiration barriers. Additionally, these findings strengthen the hypothesis that cyclic components, such as pentacyclic triterpenoids, do not hinder the water diffusion through plant cuticles as effectively as acyclic constituents. For the first time a relationship between the cuticular wax composition and the transpiration barrier properties of a wide range of plant species proved insights into the potential relation between chemistry and function of plant cuticles.},
  subject      = {Kutikula},
  language  = {en}
}
@phdthesis{Koenig2016,
  author    = {K{\"o}nig, Sebastian},
  title     = {Spatially selective visual attention in Drosophila melanogaster},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-134452},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Finding the right behavior at the right time is one of the major tasks of brains. In a natural scenery there is often an abundance of stimuli present and the brain has to separate the relevant from the irrelevant ones. Selective visual attention (SVA) is a property of higher visual systems that achieves this separation, as it allows to '[…] focus on one source of sensory input to the exclusion of others' (Luck and Mangun, 1996). There are probably several forms of SVA depending upon the criteria used for the separation, such as salience, color, location in space, novelty, or motion. Many studies have investigated SVA in humans and non-human primates. However, complex functions like attention were initially not expected to be already implemented in the brains of simple organisms like Drosophila. After a first demonstration of selective attention in the fly (Wolf and Heisenberg, 1980), it took some time until other studies included attentional mechanisms in their argumentation to explain certain behaviors of Drosophila. However, their definition and characterization of attention differed and often was ambiguous. Here, one particular form, spatially selective visual attention in the fly Drosophila is investigated. It has been shown earlier that the fly spontaneously may restrict its behavioral responses in stationary flight to the visual stimuli on one side of the visual field. On the basis of experiments of Sareen et al., (2011) it has been conjectured that the fly has a focus of attention (FoA) and that the fly responds to the visual stimuli within this area of the visual field. Whether the FoA is the adequate concept for this spatial property of SVA in the fly needs to be further discussed and is a subject also of the present study. At this stage, the concept will be used in the description of the new results expanding the characterization of SVA. This study continued the investigation of SVA during tethered flight with variable but controlled visual input and an automated primary data evaluation. This standardized paradigm allowed for analysis of wild-type behavior as well as for a comparison of several mutant and pharmacologically manipulated strains to the wild-type. Some properties of human SVA like the occurrence of externally as well as internally caused shifts of attention were found in Drosophila and it could be shown, that SVA in the fly can be externally guided and has an attention span. Additionally, a neurotransmitter and proteins, which play a significant role in SVA were discovered. Based on this, the genetic tools available for Drosophila provided the means to a first examination of cells and circuits involved in SVA. Finally, the free walk behavior of flies that had been shown to have compromised SVA was characterized. The results suggested that the observed phenotypes of SVA were not behavior specific. Covert shifts of the FoA were investigated. The FoA can be externally guided by visual cues to one or the other side of the visual field and even after the cue has disappeared it remains there for <4s. An intriguing finding of this study is the fact, that the quality of the cue determines whether it is attractive or repellent. For example a cue can be changed from being repellent (negative) to being attractive (positive) by changing its oscillation amplitude from 4° to 2°. Testing the effectiveness of cues in the upper and lower visual field separately, revealed that the perception of a cue by the fly is not exclusively based on a sum of its specifications. Because positive cueing did not have an after-effect in each of the two half-fields alone, but did so if the cue was shown in both, the fly seems to evaluate the cue for each combination of parameters specifically. Whether this evaluation of the cue changed on a trial-to-trial basis or if the cue in some cases failed to shift the FoA can at this point not be determined. Looking at the responses of the fly to the displacement of a black vertical stripe showed that they can be categorized as no responses, syn-directional responses (following the direction of motion of the stripe) and anti-directional responses (in the opposite direction of the motion of the stripe). The yaw-torque patterns of the latter bared similarities with spontaneous body saccades and they most likely represented escape attempts of the fly. Syn-directional responses, however, were genuine object responses, distinguishable by a longer latency until they were elicited and a larger amplitude. These properties as well as the distribution of response polarities were not influenced by the presence or absence of a cue. When two stripes were displaced simultaneously in opposite directions the rate of no responses increased in comparison to the displacement of a single stripe. If one of the stripes was cued, both, the responses towards and away from the side of cue resembled the syn-directional responses. Significant progress was made with the elucidation of the neuronal underpinnings of SVA. Ablation of the mushroom bodies (MB) demonstrated their requirement for SVA. Furthermore, it was shown that dopamine signaling has to be balanced between too much and too little. Either inhibiting the synthesis of dopamine or its re-uptake at the synapse via the dDAT impaired the flies' susceptibility to cueing. Using the Gal4/UAS system, cell specific expression or knockdown of the dDAT was used to scrutinize the role of MB sub-compartments in SVA. The αβ-lobes turned out to be necessary and sufficient to maintain SVA. The Gal4-line c708a labels only a subset of Kenyon cells (KC) within the αβ-lobes, αβposterior. These cells stand out, because of (A) the mesh-like arrangement of their fibers within the lobes and (B) the fact that unlike the other KCs they bypass the calyx and thereby the main source of olfactory input to the MBs, forming connections only in the posterior accessory calyx (Tanaka et al., 2008). This structure receives no or only marginal olfactory input, suggesting for it a role in tasks other than olfaction. This study shows their requirement in a visual task by demonstrating that they are necessary to uphold SVA. Restoring dDAT function in these approximately only 90 cells was probably insufficient to lower the dopamine concentration at the relevant synapses and hence a rescue failed. Alternatively, the processes mediating SVA at the αβ-lobes might require an interplay between all of their KCs. In conclusion, the results provide an initial point for future research to fully understand the localization of and circuitry required for SVA in the brain. In the experiments described so far, attention has been externally guided. However, flies are also able to internally shift their FoA without any cues from the outside world. In a set of 60 consecutive simultaneous displacements of two stripes, they were more likely to produce a response with the same polarity as the preceding one than a random polarity selection predicted. This suggested a dwelling of the FoA on one side of the visual field. Assuming that each response was influenced by the previous one in a way that the probability to repeat the response polarity was increased by a certain factor (dwelling factor, df), a random selection of response type including a df was computed. Implementation of the df removed the difference between observed probability of polarity repetition and the one suggested by random selection. When the interval between displacements was iteratively increased to 5s, no significant df could be detected anymore for pauses longer than 4s. In conclusion, Drosophila has an attention span of approximately 4s. Flies with a mutation in the radish gene expressed no after-effect of cueing and had a shortened attention span of about 1s. The dDAT inhibitor methylphenidate is able to rescue the first, but does not affect the latter phenotype. Probably, radish is differently involved in the two mechanisms. This study showed, that endogenous (covert) shifts of spatially selective visual attention in the fly Drosophila can be internally and externally guided. The variables determining the quality of a cue turned out to be multifaceted and a more systematic approach is needed for a better understanding of what property or feature of the cue changes the way it is evaluated by the fly. A first step has been made to demonstrate that SVA is a fundamental process and compromising it can influence the characteristics of other behaviors like walking. The existence of an attention span, the dependence of SVA on dopamine as well as the susceptibility to pharmacological manipulations, which in humans are used to treat respective diseases, point towards striking similarities between SVA in humans and Drosophila.},
  subject      = {Taufliege},
  language  = {en}
}
@phdthesis{Schwartz2016,
  author    = {Schwartz, Christian},
  title     = {Modeling and Evaluation of Multi-Stakeholder Scenarios in Communication Networks},
  issn      = {1432-8801},
  doi       = {10.25972/OPUS-13388},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133887},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {Today's Internet is no longer only controlled by a single stakeholder, e.g. a standard body or a telecommunications company. Rather, the interests of a multitude of stakeholders, e.g. application developers, hardware vendors, cloud operators, and network operators, collide during the development and operation of applications in the Internet. Each of these stakeholders considers different KPIs to be important and attempts to optimise scenarios in its favour. This results in different, often opposing views and can cause problems for the complete network ecosystem. One example of such a scenario are Signalling Storms in the mobile Internet, with one of the largest occurring in Japan in 2012 due to the release and high popularity of a free instant messaging application. The network traffic generated by the application caused a high number of connections to the Internet being established and terminated. This resulted in a similarly high number of signalling messages in the mobile network, causing overload and a loss of service for 2.5 million users over 4 hours. While the network operator suffers the largest impact of this signalling overload, it does not control the application. Thus, the network operator can not change the application traffic characteristics to generate less network signalling traffic. The stakeholders who could prevent, or at least reduce, such behaviour, i.e. application developers or hardware vendors, have no direct benefit from modifying their products in such a way. This results in a clash of interests which negatively impacts the network performance for all participants. The goal of this monograph is to provide an overview over the complex structures of stakeholder relationships in today's Internet applications in mobile networks. To this end, we study different scenarios where such interests clash and suggest methods where tradeoffs can be optimised for all participants. If such an optimisation is not possible or attempts at it might lead to adverse effects, we discuss the reasons.},
  subject      = {Leistungsbewertung},
  language  = {en}
}
@phdthesis{SalinasSegura2016,
  author    = {Salinas Segura, Alexander},
  title     = {The Internet of Things: Business Applications, Technology Acceptance, and Future Prospects},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131605},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2016},
  abstract  = {This dissertation explores the Internet of Things from three different perspectives for which three individual studies were conducted. The first study presents a business application within supply chain management. The second study addresses user acceptance of pervasive information systems, while the third study covers future prospects of the Internet of Things. The first study is about wireless sensor technologies and their possibilities for optimizing product quality in the cold chain. The processing of sensor data such as temperature information allows for the construction of novel issuing policies in distribution centers. The objective of the study was to investigate the possible economic potential of sensor-based issuing policies in a cold chain. By means of simulation, we analyzed a three-echelon supply chain model, including a manufacturer, a distribution center, and a retail store. Our analysis shows that sensor-based issuing policies bear the potential to become an effective complement to conventional issuing policies. However, the results also indicate that important trade-offs must be taken into account in the selection of a specific issuing policy. The second study deals with the increasing emergence of pervasive information systems and user acceptance. Based on the integration of the extended "Unified Theory of Acceptance and Use of Technology" (UTAUT2) and three pervasiveness constructs, we derived a comprehensive research model to account for pervasive information systems. Data collected from 346 participants in an online survey was analyzed to test the developed research model using structural equation modeling and taking into account multi-group and mediation analysis. The results confirm the applicability of the integrated UTAUT2 model to measure pervasiveness. The third study addresses future prospects of the Internet of Things within the retail industry. We employed a research framework to explore the macro- as well as microeconomic perspective. First, we developed future projections for the retail industry containing IoT aspects. Second, a two-round Delphi study with an expert panel of 15 participants was conducted to evaluate the projections. Third, we used scenario development to create scenarios of the most relevant projections evaluated by the participants.},
  subject      = {Internet der Dinge},
  language  = {en}
}