@article{KoenigBaenningerGarciaetal.2013, author = {K{\"o}nig, Markus and Baenninger, Matthias and Garcia, Andrei G. F. and Harjee, Nahid and Pruitt, Beth L. and Ames, C. and Leubner, Philipp and Br{\"u}ne, Christoph and Buhmann, Hartmut and Molenkamp, Laurens W. and Goldhaber-Gordon, David}, title = {Spatially Resolved Study of Backscattering in the Quantum Spin Hall State}, series = {Physical Review X}, volume = {3}, journal = {Physical Review X}, number = {2}, issn = {2160-3308}, doi = {10.1103/PhysRevX.3.021003}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-127225}, pages = {21003}, year = {2013}, abstract = {The discovery of the quantum spin Hall (QSH) state, and topological insulators in general, has sparked strong experimental efforts. Transport studies of the quantum spin Hall state have confirmed the presence of edge states, showed ballistic edge transport in micron-sized samples, and demonstrated the spin polarization of the helical edge states. While these experiments have confirmed the broad theoretical model, the properties of the QSH edge states have not yet been investigated on a local scale. Using scanning gate microscopy to perturb the QSH edge states on a submicron scale, we identify well-localized scattering sites which likely limit the expected nondissipative transport in the helical edge channels. In the micron-sized regions between the scattering sites, the edge states appear to propagate unperturbed, as expected for an ideal QSH system, and are found to be robust against weak induced potential fluctuations.}, language = {en} } @article{HopfmannAlbertSchneideretal.2013, author = {Hopfmann, C. and Albert, F. and Schneider, C. and H{\"o}fling, S. and Kamp, M. and Forchel, A. and Kanter, I. and Reizenstein, S.}, title = {Nonlinear emission characteristics of quantum dot-micropillar lasers in the presence of polarized optical feedback}, series = {New Journal of Physics}, volume = {15}, journal = {New Journal of Physics}, number = {025030}, issn = {1367-2630}, doi = {10.1088/1367-2630/15/2/025030}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123127}, year = {2013}, abstract = {We report on electrically pumped quantum dot-microlasers in the presence of polarized self-feedback. The high-\(\beta\) microlasers show two orthogonal, linearly polarized emission modes which are coupled via the common gain medium. This coupling is explained in terms of gain competition between the two lasing modes and leads to distinct differences in their input-output characteristics. By applying polarized self-feedback via an external mirror, we are able to control the laser characteristics of the emission modes in terms of the output power, the coherence time and the photon statistics. We find that linearly polarized self-feedback stabilizes the lasing of a given mode, while cross-polarized feedback between the two modes reduces strongly the intensity of the other emission mode showing particular high-intensity fluctuations and even super-thermal values of the photon autocorrelation function \(g^{(2)} (\tau)\) at zero delay. Measurements of \(g^{(2)} (\tau)\) under external feedback also allow us to detect revival peaks associated with the round trip time of the external cavity. Analyzing the damping and shape of the \(g^{(2)} (\tau)\) revival peaks by a phenomenological model provides us insight into the underlying physics such as the effective exciton lifetime and gain characteristics of the quantum dots in the active region of these microlasers.}, language = {en} } @article{KimKusudoLoeffleretal.2013, author = {Kim, N. Y. and Kusudo, K. and L{\"o}ffler, A. and H{\"o}fling, S. and Forchel, A. and Yamamoto, Y.}, title = {Exciton-polariton condensates near the Dirac point in a triangular lattice}, series = {New Journal of Physics}, volume = {15}, journal = {New Journal of Physics}, number = {035032}, issn = {1367-2630}, doi = {10.1088/1367-2630/15/3/035032}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123103}, year = {2013}, abstract = {Dirac particles, massless relativistic entities, obey linear energy dispersions and hold important implications in particle physics. The recent discovery of Dirac fermions in condensed matter systems including graphene and topological insulators has generated a great deal of interest in exploring the relativistic properties associated with Dirac physics in solid-state materials. In addition, there are stimulating research activities to engineer Dirac particles, elucidating their exotic physical properties in a controllable setting. One of the successful platforms is the ultracold atom-optical lattice system, whose dynamics can be manipulated and probed in a clean environment. A microcavity exciton-polariton-lattice system offers the advantage of forming high-orbital condensation in non-equilibrium conditions, which enables one to explore novel quantum orbital order in two dimensions. In this paper, we experimentally construct the band structures near Dirac points, the vertices of the first hexagonal Brillouin zone with exciton-polariton condensates trapped in a triangular lattice. Due to the finite spectral linewidth, the direct map of band structures at Dirac points is elusive; however, we identify the linear part above Dirac points and its associated velocity value is similar to ~0.9-2 x \(10^8 cm s^{-1}\), consistent with the theoretical estimate \(1 x 10^8 cm s^{-1}\) with a \(2 \mu m\) lattice constant. We envision that the exciton-polariton condensates in lattices would be a promising solid-state platform, where the system order parameter can be accessed in both real and momentum spaces.}, language = {en} } @article{KasprzakSivalertpornAlbertetal.2013, author = {Kasprzak, J. and Sivalertporn, K. and Albert, F. and Schneider, C. and H{\"o}fling, S. and Kamp, M. and Forchel, A. and Muljarov, E. A. and Langbein, W.}, title = {Coherence dynamics and quantum-to-classical crossover in an exciton-cavity system in the quantum strong coupling regime}, series = {New Journal of Physics}, volume = {15}, journal = {New Journal of Physics}, number = {045013}, issn = {1367-2630}, doi = {10.1088/1367-2630/15/4/045013}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123005}, year = {2013}, abstract = {Interaction between light and matter generates optical nonlinearities, which are particularly pronounced in the quantum strong coupling regime. When a single bosonic mode couples to a single fermionic mode, a Jaynes-Cummings (JC) ladder is formed, which we realize here using cavity photons and quantum dot excitons. We measure and model the coherent anharmonic response of this strongly coupled exciton-cavity system at resonance. Injecting two photons into the cavity, we demonstrate a \(\sqrt 2\) larger polariton splitting with respect to the vacuum Rabi splitting. This is achieved using coherent nonlinear spectroscopy, specifically four-wave mixing, where the coherence between the ground state and the first (second) rung of the JC ladder can be interrogated for positive (negative) delays. With increasing excitation intensity and thus rising average number of injected photons, we observe spectral signatures of the quantum-to-classical crossover of the strong coupling regime.}, language = {en} } @article{OkadaRotenbergKevanetal.2013, author = {Okada, Michio and Rotenberg, Eli and Kevan, S. D. and Sch{\"a}fer, J. and Ujfalussy, Balazs and Stocks, G. Malcolm and Genatempo, B. and Bruno, E. and Plummer, E. W.}, title = {Evolution of the electronic structure in \(Mo_{1-x}Re_x\) alloys}, series = {New Journal of Physics}, volume = {15}, journal = {New Journal of Physics}, number = {093010}, issn = {1367-2630}, doi = {10.1088/1367-2630/15/9/093010}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-122993}, year = {2013}, abstract = {We report a detailed experimental and theoretical study of the electronic structure of \(Mo_{1-x}Re_x\) random alloys. We have measured electronic band dispersions for clean and hydrogen-covered \(Mo_{1-x}Re_x\) ( 110) with x = 0-0.25 using angle-resolved photoemission spectroscopy. Our results suggest that the bulk and most surface electronic bands shift relative to the Fermi level systematically and approximately rigidly with Re concentration. We distinguish and quantify two contributions to these shifts: a raise of the Fermi energy and an increase of the overall bandwidth. Alloy bands calculated using the first-principles Korringa-Kohn-Rostoker coherent-potential-approximation method accurately predict both of these effects. As derived from the rigid band model, the Fermi energy shift is inversely related to the bulk density of states in this energy region. Using our results, we also characterize an electronic topological transition of the bulk Fermi surface and relate this to bulk transport properties. Finally, we distinguish effects beyond the rigid band approximation: a highly surface-localized state and a composition-dependent impact of the spin-orbit interaction.}, language = {en} } @article{MoffetRoedelKellyetal.2013, author = {Moffet, R. C. and R{\"o}del, R. C. and Kelly, S. T. and Yu, X. Y. and Carroll, G. T. and Fast, J. and Zaveri, R. A. and Laskin, A. and Gilles, M. K.}, title = {Spectro-microscopic measurements of carbonaceous aerosol aging in Central California}, series = {Atmospheric Chemistry and Physics}, volume = {13}, journal = {Atmospheric Chemistry and Physics}, number = {20}, issn = {1680-7324}, doi = {10.5194/acp-13-10445-2013}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-121827}, year = {2013}, abstract = {Carbonaceous aerosols are responsible for large uncertainties in climate models, degraded visibility, and adverse health effects. The Carbonaceous Aerosols and Radiative Effects Study (CARES) was designed to study carbonaceous aerosols in the natural environment of the Central Valley, California, and learn more about their atmospheric formation and aging. This paper presents results from spectro-microscopic measurements of carbonaceous particles collected during CARES at the time of a pollution accumulation event (27-29 June 2010), when in situ measurements indicated an increase in the organic carbon content of aerosols as the Sacramento urban plume aged. Computer-controlled scanning electron microscopy coupled with an energy dispersive X-ray detector (CCSEM/EDX) and scanning transmission X-ray microscopy coupled with near-edge X-ray absorption spectroscopy (STXM/NEXAFS) were used to probe the chemical composition and morphology of individual particles. It was found that the mass of organic carbon on individual particles increased through condensation of secondary organic aerosol. STXM/NEXAFS indicated that the number fraction of homogenous organic particles lacking inorganic inclusions (greater than similar to 50 nm equivalent circular diameter) increased with plume age, as did the organic mass per particle. Comparison of the CARES spectro-microscopic dataset with a similar dataset obtained in Mexico City during the MILAGRO campaign showed that fresh particles in Mexico City contained three times as much carbon as those sampled during CARES. The number fraction of soot particles at the Mexico City urban site (ranging from 16.6 to 47.3 \%) was larger than at the CARES urban site (13.4-15.7\%), and the most aged samples from CARES contained fewer carbon-carbon double bonds. Differences between carbonaceous particles in Mexico City and California result from different sources, photochemical conditions, gas phase reactants, and secondary organic aerosol precursors. The detailed results provided by these spectro-microscopic measurements will allow for a comprehensive evaluation of aerosol process models used in climate research.}, language = {en} } @article{CzerniukBrueggemannTepperetal.2014, author = {Czerniuk, T. and Br{\"u}ggemann, C. and Tepper, J. and Brodbeck, S. and Schneider, C. and Kamp, M. and H{\"o}fling, S. and Glavin, B. A. and Yakovlev, D. R. and Akimov, A. V. and Bayer, M.}, title = {Lasing from active optomechanical resonators}, series = {Nature Communications}, volume = {5}, journal = {Nature Communications}, doi = {10.1038/ncomms5038}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-121559}, pages = {4038}, year = {2014}, abstract = {Planar microcavities with distributed Bragg reflectors (DBRs) host, besides confined optical modes, also mechanical resonances due to stop bands in the phonon dispersion relation of the DBRs. These resonances have frequencies in the 10- to 100-GHz range, depending on the resonator's optical wavelength, with quality factors exceeding 1,000. The interaction of photons and phonons in such optomechanical systems can be drastically enhanced, opening a new route towards the manipulation of light. Here we implemented active semiconducting layers into the microcavity to obtain a vertical-cavity surface-emitting laser (VCSEL). Thereby, three resonant excitations--photons, phonons and electrons--can interact strongly with each other providing modulation of the VCSEL laser emission: a picosecond strain pulse injected into the VCSEL excites long-living mechanical resonances therein. As a result, modulation of the lasing intensity at frequencies up to 40 GHz is observed. From these findings, prospective applications of active optomechanical resonators integrated into nanophotonic circuits may emerge.}, language = {en} } @article{LueftnerMilkoHuppmannetal.2014, author = {L{\"u}ftner, Daniel and Milko, Matus and Huppmann, Sophia and Scholz, Markus and Ngyuen, Nam and Wießner, Michael and Sch{\"o}ll, Achim and Reinert, Friedrich and Puschnig, Peter}, title = {CuPc/Au(1 1 0): Determination of the azimuthal alignment by a combination of angle-resolved photoemission and density functional theory}, series = {Journal of Electron Spectroscopy and Related Phenomena}, volume = {195}, journal = {Journal of Electron Spectroscopy and Related Phenomena}, issn = {0368-2048}, doi = {10.1016/j.elspec.2014.06.002}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-120986}, pages = {293-300}, year = {2014}, abstract = {Here we report on a combined experimental and theoretical study on the structural and electronic properties of a monolayer of Copper-Phthalocyanine (CuPc) on the Au(1 1 0) surface. Low-energy electron diffraction reveals a commensurate overlayer unit cell containing one adsorbate species. The azimuthal alignment of the CuPc molecule is revealed by comparing experimental constant binding energy (kxky)-maps using angle-resolved photoelectron spectroscopy with theoretical momentum maps of the free molecule's highest occupied molecular orbital (HOMO). This structural information is confirmed by total energy calculations within the framework of van-der-Waals corrected density functional theory. The electronic structure is further analyzed by computing the molecule-projected density of states, using both a semi-local and a hybrid exchange-correlation functional. In agreement with experiment, the HOMO is located about 1.2 eV below the Fermi-level, while there is no significant charge transfer into the molecule and the CuPc LUMO remains unoccupied on the Au(1 1 0) surface.}, language = {en} } @article{WinklerFischerSchadeetal.2015, author = {Winkler, Karol and Fischer, Julian and Schade, Anne and Amthor, Matthias and Dall, Robert and Geßler, Jonas and Emmerling, Monika and Ostrovskaya, Elena A. and Kamp, Martin and Schneider, Christian and H{\"o}fling, Sven}, title = {A polariton condensate in a photonic crystal potential landscape}, series = {New Journal of Physics}, volume = {17}, journal = {New Journal of Physics}, doi = {10.1088/1367-2630/17/2/023001}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125050}, pages = {023001}, year = {2015}, abstract = {The possibility of investigating macroscopic coherent quantum states in polariton condensates and of engineering polariton landscapes in semiconductors has triggered interest in using polaritonic systems to simulate complex many-body phenomena. However, advanced experiments require superior trapping techniques that allow for the engineering of periodic and arbitrary potentials with strong on-site localization, clean condensate formation, and nearest-neighbor coupling. Here we establish a technology that meets these demands and enables strong, potentially tunable trapping without affecting the favorable polariton characteristics. The traps are based on a locally elongated microcavity which can be formed by standard lithography. We observe polariton condensation with non-resonant pumping in single traps and photonic crystal square lattice arrays. In the latter structures, we observe pronounced energy bands, complete band gaps, and spontaneous condensation at the M-point of the Brillouin zone.}, language = {en} } @article{ZusanGiesekingZersonetal.2015, author = {Zusan, Andreas and Gieseking, Bj{\"o}rn and Zerson, Mario and Dyakonov, Vladimir and Magerle, Robert and Deibel, Carsten}, title = {The Effect of Diiodooctane on the Charge Carrier Generation in Organic Solar Cells Based on the Copolymer PBDTTT-C}, series = {Scientific Reports}, volume = {5}, journal = {Scientific Reports}, doi = {10.1038/srep08286}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125022}, pages = {8286}, year = {2015}, abstract = {Microstructural changes and the understanding of their effect on photocurrent generation are key aspects for improving the efficiency of organic photovoltaic devices. We analyze the impact of a systematically increased amount of the solvent additive diiodooctane (DIO) on the morphology of PBDTTT-C:PC71BM blends and related changes in free carrier formation and recombination by combining surface imaging, photophysical and charge extraction techniques. We identify agglomerates visible in AFM images of the 0\% DIO blend as PC71BM domains embedded in an intermixed matrix phase. With the addition of DIO, a decrease in the size of fullerene domains along with a demixing of the matrix phase appears for 0.6\% and 1\% DIO. Surprisingly, transient absorption spectroscopy reveals an efficient photogeneration already for the smallest amount of DIO, although the largest efficiency is found for 3\% DIO. It is ascribed to a fine-tuning of the blend morphology in terms of the formation of interpenetrating donor and acceptor phases minimizing geminate and nongeminate recombination as indicated by charge extraction experiments. An increase in the DIO content to 10\% adversely affects the photovoltaic performance, most probably due to an inefficient free carrier formation and trapping in a less interconnected donor-acceptor network.}, language = {en} } @article{WildMarshallBocketal.2012, author = {Wild, J. M. and Marshall, H. and Bock, M. and Schad, L. R. and Jakob, P. M. and Puderbach, M. and Molinari, F. and Van Beek, E. J. R. and Biederer, J.}, title = {MRI of the lung (1/3): methods}, series = {Insights into Imaging}, volume = {3}, journal = {Insights into Imaging}, number = {4}, doi = {10.1007/s13244-012-0176-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-124238}, pages = {345-353}, year = {2012}, abstract = {Proton magnetic resonance imaging (MRI) has recently emerged as a clinical tool to image the lungs. This paper outlines the current technical aspects of MRI pulse sequences, radiofrequency (RF) coils and MRI system requirements needed for imaging the pulmonary parenchyma and vasculature. Lung MRI techniques are presented as a "technical toolkit", from which MR protocols will be composed in the subsequent papers for comprehensive imaging of lung disease and function (parts 2 and 3). This paper is pitched at MR scientists, technicians and radiologists who are interested in understanding and establishing lung MRI methods. Images from a 1.5 T scanner are used for illustration of the sequences and methods that are highlighted. Main Messages • Outline of the hardware and pulse sequence requirements for proton lung MRI • Overview of pulse sequences for lung parenchyma, vascular and functional imaging with protons • Demonstration of the pulse-sequence building blocks for clinical lung MRI protocols}, language = {en} } @article{MaierGoldForcheletal.2014, author = {Maier, Sebastian and Gold, Peter and Forchel, Alfred and Gregersen, Niels and Mork, Jesper and H{\"o}fling, Sven and Schneider, Christian and Kamp, Martin}, title = {Bright single photon source based on self-aligned quantum dot-cavity systems}, series = {Optics Express}, volume = {22}, journal = {Optics Express}, number = {7}, issn = {1094-4087}, doi = {10.1364/OE.22.008136}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-119801}, pages = {8136-42}, year = {2014}, abstract = {We report on a quasi-planar quantum-dot-based single-photon source that shows an unprecedented high extraction efficiency of 42\% without complex photonic resonator geometries or post-growth nanofabrication. This very high efficiency originates from the coupling of the photons emitted by a quantum dot to a Gaussian shaped nanohill defect that naturally arises during epitaxial growth in a self-aligned manner. We investigate the morphology of these defects and characterize the photonic operation mechanism. Our results show that these naturally arising coupled quantum dot-defects provide a new avenue for efficient (up to 42\% demonstrated) and pure (g(2)(0) value of 0.023) single-photon emission.}, language = {en} } @article{FiedlerElKarehEremeevetal.2014, author = {Fiedler, Sebastian and El-Kareh, Lydia and Eremeev, Sergey V. and Tereshchenko, Oleg E. and Seibel, Christoph and Lutz, Peter and Kokh, Konstantin A. and Chulkov, Evgueni V. and Kuznetsova, Tatyana V. and Grebennikov, Vladimir I. and Bentmann, Hendrik and Bode, Matthias and Reinert, Friedrich}, title = {Defect and structural imperfection effects on the electronic properties of BiTeI surfaces}, series = {New Journal of Physics}, volume = {16}, journal = {New Journal of Physics}, number = {075013}, issn = {1367-2630}, doi = {10.1088/1367-2630/16/7/075013}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-119467}, year = {2014}, abstract = {The surface electronic structure of the narrow-gap seminconductor BiTeI exhibits a large Rashba-splitting which strongly depends on the surface termination. Here we report on a detailed investigation of the surface morphology and electronic properties of cleaved BiTeI single crystals by scanning tunneling microscopy, photoelectron spectroscopy (ARPES, XPS), electron diffraction (SPA-LEED) and density functional theory calculations. Our measurements confirm a previously reported coexistence of Te- and I-terminated surface areas originating from bulk stacking faults and find a characteristic length scale of ~100 nm for these areas. We show that the two terminations exhibit distinct types of atomic defects in the surface and subsurface layers. For electronic states resided on the I terminations we observe an energy shift depending on the time after cleavage. This aging effect is successfully mimicked by depositon of Cs adatoms found to accumulate on top of the I terminations. As shown theoretically on a microscopic scale, this preferential adsorbing behaviour results from considerably different energetics and surface diffusion lengths at the two terminations. Our investigations provide insight into the importance of structural imperfections as well as intrinsic and extrinsic defects on the electronic properties of BiTeI surfaces and their temporal stability.}, language = {en} } @article{BaumannTvingstedtHeiberetal.2014, author = {Baumann, A. and Tvingstedt, K. and Heiber, M. C. and V{\"a}th, S. and Momblona, C. and Bolink, H. J. and Dyakonov, V.}, title = {Persistent photovoltage in methylammonium lead iodide perovskite solar cells}, series = {APL Materials}, volume = {2}, journal = {APL Materials}, number = {8}, doi = {10.1063/1.4885255}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-119397}, pages = {081501}, year = {2014}, abstract = {We herein perform open circuit voltage decay (OCVD) measurements on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer-fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70BM blends. We observe two very different time domains of the voltage transient in the perovskite solar cell with a first drop on a short time scale that is similar to the decay in the studied organic solar cells. However, 65\%-70\% of the maximum photovoltage persists on much longer timescales in the perovskite solar cell than in the organic devices. In addition, we find that the recombination dynamics in all time regimes are dependent on the starting illumination intensity, which is also not observed in the organic devices. We then discuss the potential origins of these unique behaviors.}, language = {en} } @article{TvingstedtMalinkiewiczBaumannetal.2014, author = {Tvingstedt, Kristofer and Malinkiewicz, Olga and Baumann, Andreas and Deibel, Carsten and Snaith, Henry J. and Dyakonov, Vladimir and Bolink, Henk J.}, title = {Radiative efficiency of lead iodide based perovskite solar cells}, series = {Scientific Reports}, volume = {4}, journal = {Scientific Reports}, doi = {10.1038/srep06071}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-119360}, pages = {6071}, year = {2014}, abstract = {The maximum efficiency of any solar cell can be evaluated in terms of its corresponding ability to emit light. We herein determine the important figure of merit of radiative efficiency for Methylammonium Lead Iodide perovskite solar cells and, to put in context, relate it to an organic photovoltaic (OPV) model device. We evaluate the reciprocity relation between electroluminescence and photovoltaic quantum efficiency and conclude that the emission from the perovskite devices is dominated by a sharp band-to-band transition that has a radiative efficiency much higher than that of an average OPV device. As a consequence, the perovskite have the benefit of retaining an open circuit voltage ~0.14 V closer to its radiative limit than the OPV cell. Additionally, and in contrast to OPVs, we show that the photoluminescence of the perovskite solar cell is substantially quenched under short circuit conditions in accordance with how an ideal photovoltaic cell should operate.}, language = {en} } @article{KuemmelLindenberger2014, author = {K{\"u}mmel, Reiner and Lindenberger, Dietmar}, title = {How energy conversion drives economic growth far from the equilibrium of neoclassical economics}, series = {New Journal of Physics}, volume = {16}, journal = {New Journal of Physics}, number = {125008}, issn = {1367-2630}, doi = {10.1088/1367-2630/16/12/125008}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-118102}, year = {2014}, abstract = {Energy conversion in the machines and information processors of the capital stock drives the growth of modern economies. This is exemplified for Germany, Japan, and the USA during the second half of the 20th century: econometric analyses reveal that the output elasticity, i.e. the economic weight, of energy is much larger than energyʼs share in total factor cost, while for labor just the opposite is true. This is at variance with mainstream economic theory according to which an economy should operate in the neoclassical equilibrium, where output elasticities equal factor cost shares. The standard derivation of the neoclassical equilibrium from the maximization of profit or of time-integrated utility disregards technological constraints. We show that the inclusion of these constraints in our nonlinear-optimization calculus results in equilibrium conditions, where generalized shadow prices destroy the equality of output elasticities and cost shares. Consequently, at the prices of capital, labor, and energy we have known so far, industrial economies have evolved far from the neoclassical equilibrium. This is illustrated by the example of the German industrial sector evolving on the mountain of factor costs before and during the first and the second oil price explosion. It indicates the influence of the 'virtually binding' technological constraints on entrepreneurial decisions, and the existence of 'soft constraints' as well. Implications for employment and future economic growth are discussed.}, language = {en} } @article{BareilleFortunaRoedeletal.2014, author = {Bareille, C. and Fortuna, F. and R{\"o}del, T. C. and Bertran, F. and Gabay, M. and Hijano Cubelos, O. and Taleb-Ibrahimi, A. and Le F{\`e}vre, P. and Bibes, M. and Barthelemy, A. and Maroutian, T. and Lecoeur, P. and Rozenberg, M. J. and Santander-Syro, A. F.}, title = {Two-dimensional electron gas with six-fold symmetry at the (111) surface of KTaO3}, series = {Scientific Reports}, volume = {4}, journal = {Scientific Reports}, issn = {2045-2322}, doi = {10.1038/srep03586}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-117703}, pages = {3586}, year = {2014}, abstract = {Two-dimensional electron gases (2DEGs) at transition-metal oxide (TMO) interfaces, and boundary states in topological insulators, are being intensively investigated. The former system harbors superconductivity, large magneto-resistance, and ferromagnetism. In the latter, honeycomb-lattice geometry plus bulk spin-orbit interactions lead to topologically protected spin-polarized bands. 2DEGs in TMOs with a honeycomb-like structure could yield new states of matter, but they had not been experimentally realized, yet. We successfully created a 2DEG at the (111) surface of KTaO3, a strong insulator with large spin-orbit coupling. Its confined states form a network of weakly-dispersing electronic gutters with 6-fold symmetry, a topology novel to all known oxide-based 2DEGs. If those pertain to just one Ta-(111) bilayer, model calculations predict that it can be a topological metal. Our findings demonstrate that completely new electronic states, with symmetries not realized in the bulk, can be tailored in oxide surfaces, promising for TMO-based devices.}, language = {en} } @article{BillerCholiBlaimeretal.2014, author = {Biller, Armin and Choli, Morwan and Blaimer, Martin and Breuer, Felix A. and Jakob, Peter M. and Bartsch, Andreas J.}, title = {Combined Acquisition Technique (CAT) for Neuroimaging of Multiple Sclerosis at Low Specific Absorption Rates (SAR)}, series = {PLOS ONE}, volume = {9}, journal = {PLOS ONE}, number = {3}, issn = {1932-6203}, doi = {10.1371/journal.pone.0091030}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-117179}, pages = {e91030}, year = {2014}, abstract = {Purpose: To compare a novel combined acquisition technique (CAT) of turbo-spin-echo (TSE) and echo-planar-imaging (EPI) with conventional TSE. CAT reduces the electromagnetic energy load transmitted for spin excitation. This radiofrequency (RF) burden is limited by the specific absorption rate (SAR) for patient safety. SAR limits restrict high-field MRI applications, in particular. Material and Methods: The study was approved by the local Medical Ethics Committee. Written informed consent was obtained from all participants. T2- and PD-weighted brain images of n = 40 Multiple Sclerosis (MS) patients were acquired by CAT and TSE at 3 Tesla. Lesions were recorded by two blinded, board-certificated neuroradiologists. Diagnostic equivalence of CAT and TSE to detect MS lesions was evaluated along with their SAR, sound pressure level (SPL) and sensations of acoustic noise, heating, vibration and peripheral nerve stimulation. Results: Every MS lesion revealed on TSE was detected by CAT according to both raters (Cohen's kappa of within-rater/across-CAT/TSE lesion detection kappa(CAT) = 1.00, at an inter-rater lesion detection agreement of kappa(LES) = 0.82). CAT reduced the SAR burden significantly compared to TSE (p<0.001). Mean SAR differences between TSE and CAT were 29.0 (+/- 5.7) \% for the T2-contrast and 32.7 (+/- 21.9) \% for the PD-contrast (expressed as percentages of the effective SAR limit of 3.2 W/kg for head examinations). Average SPL of CAT was no louder than during TSE. Sensations of CAT-vs. TSE-induced heating, noise and scanning vibrations did not differ. Conclusion: T2-/PD-CAT is diagnostically equivalent to TSE for MS lesion detection yet substantially reduces the RF exposure. Such SAR reduction facilitates high-field MRI applications at 3 Tesla or above and corresponding protocol standardizations but CAT can also be used to scan faster, at higher resolution or with more slices. According to our data, CAT is no more uncomfortable than TSE scanning.}, language = {en} } @article{RauHeindelUnsleberetal.2014, author = {Rau, Markus and Heindel, Tobias and Unsleber, Sebastian and Braun, Tristan and Fischer, Julian and Frick, Stefan and Nauerth, Sebastian and Schneider, Christian and Vest, Gwenaelle and Reitzenstein, Stephan and Kamp, Martin and Forchel, Alfred and H{\"o}fling, Sven and Weinfurter, Harald}, title = {Free space quantum key distribution over 500 meters using electrically driven quantum dot single-photon sources-a proof of principle experiment}, series = {New Journal of Physics}, volume = {16}, journal = {New Journal of Physics}, number = {043003}, doi = {10.1088/1367-2630/16/4/043003}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-116760}, year = {2014}, abstract = {Highly efficient single-photon sources (SPS) can increase the secure key rate of quantum key distribution (QKD) systems compared to conventional attenuated laser systems. Here we report on a free space QKD test using an electrically driven quantum dot single-photon source (QD SPS) that does not require a separate laser setup for optical pumping and thus allows for a simple and compact SPS QKD system. We describe its implementation in our 500 m free space QKD system in downtown Munich. Emulating a BB84 protocol operating at a repetition rate of 125 MHz, we could achieve sifted key rates of 5-17 kHz with error ratios of 6-9\% and g((2))(0)-values of 0.39-0.76.}, language = {en} } @article{BraunSchneiderMaieretal.2014, author = {Braun, T. and Schneider, C. and Maier, S. and Igusa, R. and Iwamoto, S. and Forchel, A. and H{\"o}fling, S. and Arakawa, Y. and Kamp, M.}, title = {Temperature dependency of the emission properties from positioned In(Ga)As/GaAs quantum dots}, series = {AIP Advances}, volume = {4}, journal = {AIP Advances}, number = {9}, issn = {2158-3226}, doi = {10.1063/1.4896284}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-115448}, year = {2014}, abstract = {In this letter we study the influence of temperature and excitation power on the emission linewidth from site-controlled InGaAs/GaAs quantum dots grown on nanoholes defined by electron beam lithography and wet chemical etching. We identify thermal electron activation as well as direct exciton loss as the dominant intensity quenching channels. Additionally, we carefully analyze the effects of optical and acoustic phonons as well as close-by defects on the emission linewidth by means of temperature and power dependent micro-photoluminescence on single quantum dots with large pitches. (C) 2014 Author(s).}, language = {en} } @article{DauthWiessnerFeyeretal.2014, author = {Dauth, M. and Wiessner, M. and Feyer, V. and Sch{\"o}ll, A. and Puschnig, P. and Reinert, F. and Kuemmel, S.}, title = {Angle resolved photoemission from organic semiconductors: orbital imaging beyond the molecular orbital interpretation}, series = {New Journal of Physics}, volume = {16}, journal = {New Journal of Physics}, issn = {1367-2630}, doi = {10.1088/1367-2630/16/10/103005}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-115180}, pages = {103005}, year = {2014}, abstract = {Fascinating pictures that can be interpreted as showing molecular orbitals have been obtained with various imaging techniques. Among these, angle resolved photoemission spectroscopy (ARPES) has emerged as a particularly powerful method. Orbital images have been used to underline the physical credibility of the molecular orbital concept. However, from the theory of the photoemission process it is evident that imaging experiments do not show molecular orbitals, but Dyson orbitals. The latter are not eigenstates of a single-particle Hamiltonian and thus do not fit into the usual simple interpretation of electronic structure in terms of molecular orbitals. In a combined theoretical and experimental study we thus check whether a Dyson-orbital and a molecular-orbital based interpretation of ARPES lead to differences that are relevant on the experimentally observable scale. We discuss a scheme that allows for approximately calculating Dyson orbitals with moderate computational effort. Electronic relaxation is taken into account explicitly. The comparison reveals that while molecular orbitals are frequently good approximations to Dyson orbitals, a detailed understanding of photoemission intensities may require one to go beyond the molecular orbital picture. In particular we clearly observe signatures of the Dyson-orbital character for an adsorbed semiconductor molecule in ARPES spectra when these are recorded over a larger momentum range than in earlier experiments.}, language = {en} } @article{SchwenderKoenigKlapperstuecketal.2014, author = {Schwender, Joerg and Koenig, Christina and Klapperstueck, Matthias and Heinzel, Nicolas and Munz, Eberhard and Hebbelmann, Inga and Hay, Jordan O. and Denolf, Peter and De Bodt, Stefanie and Redestig, Henning and Caestecker, Evelyne and Jakob, Peter M. and Borisjuk, Ljudmilla and Rolletschek, Hardy}, title = {Transcript abundance on its own cannot be used to infer fluxes in central metabolism}, series = {Frontiers in Plant Science}, volume = {5}, journal = {Frontiers in Plant Science}, issn = {1664-462X}, doi = {10.3389/fpls.2014.00668}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-114586}, year = {2014}, abstract = {An attempt has been made to define the extent to which metabolic flux in central plant metabolism is reflected by changes in the transcriptome and metabolome, based on an analysis of in vitro cultured immature embryos of two oilseed rape (Brassica napus) accessions which contrast for seed lipid accumulation. Metabolic flux analysis (MFA) was used to constrain a flux balance metabolic model which included 671 biochemical and transport reactions within the central metabolism. This highly confident flux information was eventually used for comparative analysis of flux vs. transcript (metabolite). Metabolite profiling succeeded in identifying 79 intermediates within the central metabolism, some of which differed quantitatively between the two accessions and displayed a significant shift corresponding to flux. An RNA-Seq based transcriptome analysis revealed a large number of genes which were differentially transcribed in the two accessions, including some enzymes/proteins active in major metabolic pathways. With a few exceptions, differential activity in the major pathways (glycolysis, TCA cycle, amino acid, and fatty acid synthesis) was not reflected in contrasting abundances of the relevant transcripts. The conclusion was that transcript abundance on its own cannot be used to infer metabolic activity/fluxes in central plant metabolism. This limitation needs to be borne in mind in evaluating transcriptome data and designing metabolic engineering experiments.}, language = {en} } @article{AstakhovKrausSoltamovetal.2014, author = {Astakhov, Georgy V. and Kraus, Hannes and Soltamov, V. A. and Fuchs, Franziska and Simin, Dimitrij and Sperlich, Andreas and Baranov, P. G. and Dyakonov, Vladimir}, title = {Magnetic field and temperature sensing with atomic-scale spin defects in silicon carbide}, doi = {10.1038/srep05303}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-113025}, year = {2014}, abstract = {Quantum systems can provide outstanding performance in various sensing applications, ranging from bioscience to nanotechnology. Atomic-scale defects in silicon carbide are very attractive in this respect because of the technological advantages of this material and favorable optical and radio frequency spectral ranges to control these defects. We identified several, separately addressable spin-3/2 centers in the same silicon carbide crystal, which are immune to nonaxial strain fluctuations. Some of them are characterized by nearly temperature independent axial crystal fields, making these centers very attractive for vector magnetometry. Contrarily, the zero-field splitting of another center exhibits a giant thermal shift of -1.1 MHz/K at room temperature, which can be used for thermometry applications. We also discuss a synchronized composite clock exploiting spin centers with different thermal response.}, language = {en} } @article{ElKarehBihlmayerBuchteretal.2014, author = {El-Kareh, Lydia and Bihlmayer, Gustav and Buchter, Arne and Bentmann, Hendrik and Bl{\"u}gel, Stefan and Reinert, Friedrich and Bode, Matthias}, title = {A combined experimental and theoretical study of Rashba-split surface states on the ( √3x√3) Pb/Ag (111)R30° surface}, doi = {doi:10.1088/1367-2630/16/4/045017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-112786}, year = {2014}, abstract = {We report on a combined low-temperature scanning tunneling spectroscopy (STS), angle-resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) investigation of the ( √3x√3) Pb/Ag (111)R30° surface alloy which provides a giant Rashba-type spin splitting. With STS we observed spectroscopic features that are assigned to two hole-like Rashba-split bands in the unoccupied energy range. By means of STS and quantum interference mapping we determine the band onsets, splitting strengths, and dispersions for both bands. The unambiguous assignment of scattering vectors is achieved by comparison to ARPES measurements. While intra-band scattering is found for both Rashba bands, inter-band scattering is only observed in the occupied energy range. Spin- and orbitally-resolved band structures were obtained by DFT calculations. Considering the scattering between states of different spin- and orbital character, the apparent deviation between experimentally observed scattering events and the theoretically predicted spin polarization could be resolved.}, language = {en} } @article{AmthorWeissenseelFischeretal.2014, author = {Amthor, Matthias and Weißenseel, Sebastian and Fischer, Julian and Kamp, Martin and Schneider, Christian and H{\"o}fling, Sven}, title = {Electro-optical switching between polariton and cavity lasing in an InGaAs quantum well microcavity}, doi = {10.1364/OE.22.031146}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-111130}, year = {2014}, abstract = {We report on the condensation of microcavity exciton polaritons under optical excitation in a microcavity with four embedded InGaAs quantum wells. The polariton laser is characterized by a distinct nonlinearity in the input-output-characteristics, which is accompanied by a drop of the emission linewidth indicating temporal coherence and a characteristic persisting emission blueshift with increased particle density. The temporal coherence of the device at threshold is underlined by a characteristic drop of the second order coherence function to a value close to 1. Furthermore an external electric field is used to switch between polariton regime, polariton condensate and photon lasing.}, language = {en} } @article{BrixnerPawłowskaGoetzetal.2014, author = {Brixner, Tobias and Pawłowska, Monika and Goetz, Sebastian and Dreher, Christian and Wurdack, Matthias and Krauss, Enno and Razinskas, Gary and Geisler, Peter and Hecht, Bert}, title = {Shaping and spatiotemporal characterization of sub-10-fs pulses focused by a high-NA objective}, doi = {10.1364/OE.22.031496}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-111120}, year = {2014}, abstract = {We describe a setup consisting of a 4 f pulse shaper and a microscope with a high-NA objective lens and discuss the spects most relevant for an undistorted spatiotemporal profile of the focused beam. We demonstrate shaper-assisted pulse compression in focus to a sub-10-fs duration using phase-resolved interferometric spectral modulation (PRISM). We introduce a nanostructure-based method for sub-diffraction spatiotemporal characterization of strongly focused pulses. The distortions caused by optical aberrations and space-time coupling from the shaper can be reduced by careful setup design and alignment to about 10 nm in space and 1 fs in time.}, language = {en} } @article{XuShengGreineretal.1994, author = {Xu, Shanjia and Sheng, Xinqing and Greiner, P. and Becker, Charles R. and Geick, R.}, title = {High-order finite-element analysis of scattering properties of II-VI semiconductor materials}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-86283}, year = {1994}, abstract = {The sattering characteristics ot the n-VI semiconductors were analyzed by a method which combines the second-order finite-element method with the rigorous mode matching procedure. The method avolds the difficulty of solving the complex transcendental equation introduced in the multimode network method and calculates all the eigenvalues and eigenfunctions simultaneously which are needed for the mode matching treatment in the longitudinal direction. As a result, the whole solution procedure is significantly simplified. A comparison is given between the experimental data and the calculated results obtained with this analysis and tbe network method. Very good agreement has been achieved, the accuracy and efficiency of the present method are thus verified.}, subject = {Halbleiter}, language = {en} } @article{WolterEndesfelderLindeetal.2011, author = {Wolter, Steve and Endesfelder, Ulrike and Linde, Sebastian van de and Heilemann, Mike and Sauer, Markus}, title = {Measuring localization performance of super-resolution algorithms on very active samples}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85936}, year = {2011}, abstract = {Super-resolution fluorescence imaging based on inglemolecule localization relies critically on the availability of efficient processing algorithms to distinguish, identify, and localize emissions of single fluorophores. In multiple current applications, such as threedimensional, time-resolved or cluster imaging, high densities of fluorophore emissions are common. Here, we provide an analytic tool to test the performance and quality of localization microscopy algorithms and demonstrate that common algorithms encounter difficulties for samples with high fluorophore density. We demonstrate that, for typical single-molecule localization microscopy methods such as dSTORM and the commonly used rapidSTORM scheme, computational precision limits the acceptable density of concurrently active fluorophores to 0.6 per square micrometer and that the number of successfully localized fluorophores per frame is limited to 0.2 per square micrometer.}, language = {en} } @article{ReisererHuangHechtetal.2010, author = {Reiserer, Andreas A. and Huang, Jer-Shing and Hecht, Bert and Brixner, Tobias}, title = {Subwavelength broadband splitters and switches for femtosecond plasmonic signals}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85889}, year = {2010}, abstract = {Numerical simulations and an analytic approach based on transmission line theory are used to design splitters for nano-plasmonic signal processing that allow to arbitrarily adjust the ratio of transmission from an input into two different output arms. By adjusting the geometrical parameters of the structure, either a high bandwidth or a sharp transmission resonance is obtained. Switching between the two arms can be achieved by modulating the effective refractive index of the waveguide. Employing the instantaneous Kerr effect, switching rates in the THz regime are potentially feasible. The suggested devices are of interest for future applications in nanoplasmonic information processing.}, language = {en} } @article{WinterKampfHelluyetal.2013, author = {Winter, Patrick and Kampf, Thomas and Helluy, Xavier and Gutjahr, Fabian T. and Meyer, Cord B. and Rommel, Eberhard and Bauer, Wolfgang R. and Jakob, Peter M. and Herold, Volker}, title = {Fast retrospectively triggered local pulse-wave velocity measurements in mice with CMR-microscopy using a radial trajectory}, series = {Journal of Cardiovascular Magnetic Resonance}, journal = {Journal of Cardiovascular Magnetic Resonance}, doi = {10.1186/1532-429X-15-88}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96602}, year = {2013}, abstract = {Background The aortic pulse-wave velocity (PWV) is an important indicator of cardiovascular risk. In recent studies MRI methods have been developed to measure this parameter noninvasively in mice. Present techniques require additional hardware for cardiac and respiratory gating. In this work a robust self-gated measurement of the local PWV in mice without the need of triggering probes is proposed. Methods The local PWV of 6-months-old wild-type C57BL/6J mice (n=6) was measured in the abdominal aorta with a retrospectively triggered radial Phase Contrast (PC) MR sequence using the flow-area (QA) method. A navigator signal was extracted from the CMR data of highly asymmetric radial projections with short repetition time (TR=3 ms) and post-processed with high-pass and low-pass filters for retrospective cardiac and respiratory gating. The self-gating signal was used for a reconstruction of high-resolution Cine frames of the aortic motion. To assess the local PWV the volume flow Q and the cross-sectional area A of the aorta were determined. The results were compared with the values measured with a triggered Cartesian and an undersampled triggered radial PC-Cine sequence. Results In all examined animals a self-gating signal could be extracted and used for retrospective breath-gating and PC-Cine reconstruction. With the non-triggered measurement PWV values of 2.3±0.2 m/s were determined. These values are in agreement with those measured with the triggered Cartesian (2.4±0.2 m/s) and the triggered radial (2.3±0.2 m/s) measurement. Due to the strong robustness of the radial trajectory against undersampling an acceleration of more than two relative to the prospectively triggered Cartesian sampling could be achieved with the retrospective method. Conclusion With the radial flow-encoding sequence the extraction of a self-gating signal is feasible. The retrospective method enables a robust and fast measurement of the local PWV without the need of additional trigger hardware.}, language = {en} } @article{AstakhovFuchsSoltamovetal.2013, author = {Astakhov, Georgy V. and Fuchs, F. and Soltamov, V. A. and V{\"a}th, S. and Baranov, P. G. and Mokhov, E. N. and Dyakonov, V.}, title = {Silicon carbide light-emitting diode as a prospective room temperature source for single photons}, series = {Scientific Reports}, journal = {Scientific Reports}, doi = {10.1038/srep01637}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96308}, year = {2013}, abstract = {Generation of single photons has been demonstrated in several systems. However, none of them satisfies all the conditions, e.g. room temperature functionality, telecom wavelength operation, high efficiency, as required for practical applications. Here, we report the fabrication of light-emitting diodes (LEDs) based on intrinsic defects in silicon carbide (SiC). To fabricate our devices we used a standard semiconductor manufacturing technology in combination with high-energy electron irradiation. The room temperature electroluminescence (EL) of our LEDs reveals two strong emission bands in the visible and near infrared (NIR) spectral ranges, associated with two different intrinsic defects. As these defects can potentially be generated at a low or even single defect level, our approach can be used to realize electrically driven single photon source for quantum telecommunication and information processing.}, language = {en} } @article{SzalayWeibelHofmannetal.2013, author = {Szalay, Aladar A and Weibel, Stephanie and Hofmann, Elisabeth and Basse-Luesebrink, Thomas Christian and Donat, Ulrike and Seubert, Carolin and Adelfinger, Marion and Gnamlin, Prisca and Kober, Christina and Frentzen, Alexa and Gentschev, Ivaylo and Jakob, Peter Michael}, title = {Treatment of malignant effusion by oncolytic virotherapy in an experimental subcutaneous xenograft model of lung cancer}, series = {Journal of Translational Medicine}, journal = {Journal of Translational Medicine}, doi = {doi:10.1186/1479-5876-11-106}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96016}, year = {2013}, abstract = {Background Malignant pleural effusion (MPE) is associated with advanced stages of lung cancer and is mainly dependent on invasion of the pleura and expression of vascular endothelial growth factor (VEGF) by cancer cells. As MPE indicates an incurable disease with limited palliative treatment options and poor outcome, there is an urgent need for new and efficient treatment options. Methods In this study, we used subcutaneously generated PC14PE6 lung adenocarcinoma xenografts in athymic mice that developed subcutaneous malignant effusions (ME) which mimic pleural effusions of the orthotopic model. Using this approach monitoring of therapeutic intervention was facilitated by direct observation of subcutaneous ME formation without the need of sacrificing mice or special imaging equipment as in case of MPE. Further, we tested oncolytic virotherapy using Vaccinia virus as a novel treatment modality against ME in this subcutaneous PC14PE6 xenograft model of advanced lung adenocarcinoma. Results We demonstrated significant therapeutic efficacy of Vaccinia virus treatment of both advanced lung adenocarcinoma and tumor-associated ME. We attribute the efficacy to the virus-mediated reduction of tumor cell-derived VEGF levels in tumors, decreased invasion of tumor cells into the peritumoral tissue, and to viral infection of the blood vessel-invading tumor cells. Moreover, we showed that the use of oncolytic Vaccinia virus encoding for a single-chain antibody (scAb) against VEGF (GLAF-1) significantly enhanced mono-therapy of oncolytic treatment. Conclusions Here, we demonstrate for the first time that oncolytic virotherapy using tumor-specific Vaccinia virus represents a novel and promising treatment modality for therapy of ME associated with advanced lung cancer.}, subject = {Lungenkrebs}, language = {en} } @article{JanottaGogolinBarrettetal.2011, author = {Janotta, Peter and Gogolin, Christian and Barrett, Jonathan and Brunner, Nicolas}, title = {Limits on nonlocal correlations from the structure of the local state space}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-75003}, year = {2011}, abstract = {The outcomes of measurements on entangled quantum systems can be nonlocally correlated. However, while it is easy to write down toy theories allowing arbitrary nonlocal correlations, those allowed in quantum mechanics are limited. Quantum correlations cannot, for example, violate a principle known as macroscopic locality, which implies that they cannot violate Tsirelson's bound. This paper shows that there is a connection between the strength of nonlocal correlations in a physical theory and the structure of the state spaces of individual systems. This is illustrated by a family of models in which local state spaces are regular polygons, where a natural analogue of a maximally entangled state of two systems exists. We characterize the nonlocal correlations obtainable from such states. The family allows us to study the transition between classical, quantum and super-quantum correlations by varying only the local state space. We show that the strength of nonlocal correlations—in particular whether the maximally entangled state violates Tsirelson's bound or not— depends crucially on a simple geometric property of the local state space, known as strong self-duality. This result is seen to be a special case of a general theorem, which states that a broad class of entangled states in probabilistic theories—including, by extension, all bipartite classical and quantum states— cannot violate macroscopic locality. Finally, our results show that models exist that are locally almost indistinguishable from quantum mechanics, but can nevertheless generate maximally nonlocal correlations.}, subject = {Physik}, language = {en} } @article{JakobHertleinSturmetal.2011, author = {Jakob, Peter and Hertlein, Tobias and Sturm, Volker and Kircher, Stefan and Basse-L{\"u}sebrink, Thomas and Haddad, Daniel and Ohlsen, Knut}, title = {Visualization of Abscess Formation in a Murine Thigh Infection Model of Staphylococcus aureus by 19F-Magnetic Resonance Imaging (MRI)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74994}, year = {2011}, abstract = {Background: During the last years, 19F-MRI and perfluorocarbon nanoemulsion (PFC) emerged as a powerful contrast agent based MRI methodology to track cells and to visualize inflammation. We applied this new modality to visualize deep tissue abscesses during acute and chronic phase of inflammation caused by Staphylococcus aureus infection. Methodology and Principal Findings: In this study, a murine thigh infection model was used to induce abscess formation and PFC or CLIO (cross linked ironoxides) was administered during acute or chronic phase of inflammation. 24 h after inoculation, the contrast agent accumulation was imaged at the site of infection by MRI. Measurements revealed a strong accumulation of PFC at the abscess rim at acute and chronic phase of infection. The pattern was similar to CLIO accumulation at chronic phase and formed a hollow sphere around the edema area. Histology revealed strong influx of neutrophils at the site of infection and to a smaller extend macrophages during acute phase and strong influx of macrophages at chronic phase of inflammation. Conclusion and Significance: We introduce 19F-MRI in combination with PFC nanoemulsions as a new platform to visualize abscess formation in a murine thigh infection model of S. aureus. The possibility to track immune cells in vivo by this modality offers new opportunities to investigate host immune response, the efficacy of antibacterial therapies and the influence of virulence factors for pathogenesis.}, subject = {Staphylococcus aureus}, language = {en} } @article{RotheReinthalerLiuetal.2010, author = {Rothe, D. G. and Reinthaler, R. W. and Liu, C-X and Molenkamp, L. W. and Zhang, S-C and Hankiewicz, E. M.}, title = {Fingerprint of different spin-orbit terms for spin transport in HgTe quantum wells}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-68362}, year = {2010}, abstract = {Using k · p theory, we derive an effective four-band model describing the physics of the typical two-dimensional topological insulator (HgTe/CdTe quantum well (QW)) in the presence of an out-of-plane (in the z-direction) inversion breaking potential and an in-plane potential. We find that up to third order in perturbation theory, only the inversion breaking potential generates new elements to the four-band Hamiltonian that are off-diagonal in spin space. When this new effective Hamiltonian is folded into an effective twoband model for the conduction (electron) or valence (heavy hole) bands, two competing terms appear: (i) a Rashba spin-orbit interaction originating from inversion breaking potential in the z-direction and (ii) an in-plane Pauli term as a consequence of the in-plane potential. Spin transport in the conduction band is further analysed within the Landauer-B{\"u}ttiker formalism. We find that for asymmetrically doped HgTe QWs, the behaviour of the spin-Hall conductance is dominated by the Rashba term.}, subject = {Physik}, language = {en} } @article{ParczykHeroldKlugetal.2010, author = {Parczyk, Marco and Herold, Volker and Klug, Gert and Bauer, Wolfgang R. and Rommel, Eberhard and Jakob, Peter M.}, title = {Regional in vivo transit time measurements of aortic pulse wave velocity in mice with high-field CMR at 17.6 Tesla}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-68219}, year = {2010}, abstract = {Background: Transgenic mouse models are increasingly used to study the pathophysiology of human cardiovascular diseases. The aortic pulse wave velocity (PWV) is an indirect measure for vascular stiffness and a marker for cardiovascular risk. Results: This study presents a cardiovascular magnetic resonance (CMR) transit time (TT) method that allows the determination of the PWV in the descending murine aorta by analyzing blood flow waveforms. Systolic flow pulses were recorded with a temporal resolution of 1 ms applying phase velocity encoding. In a first step, the CMR method was validated by pressure waveform measurements on a pulsatile elastic vessel phantom. In a second step, the CMR method was applied to measure PWVs in a group of five eight-month-old apolipoprotein E deficient (ApoE(-/-)) mice and an age matched group of four C57Bl/6J mice. The ApoE(-/-) group had a higher mean PWV (PWV = 3.0 ± 0.6 m/s) than the C57Bl/6J group (PWV = 2.4 ± 0.4 m/s). The difference was statistically significant (p = 0.014). Conclusions: The findings of this study demonstrate that high field CMR is applicable to non-invasively determine and distinguish PWVs in the arterial system of healthy and diseased groups of mice.}, subject = {Medizin}, language = {en} } @article{ReichardtAlaminoSaad2011, author = {Reichardt, Joerg and Alamino, Roberto and Saad, David}, title = {The interplay between microscopic and mesoscopic structures in complex networks}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-68993}, year = {2011}, abstract = {Understanding a complex network's structure holds the key to understanding its function. The physics community has contributed a multitude of methods and analyses to this cross-disciplinary endeavor. Structural features exist on both the microscopic level, resulting from differences between single node properties, and the mesoscopic level resulting from properties shared by groups of nodes. Disentangling the determinants of network structure on these different scales has remained a major, and so far unsolved, challenge. Here we show how multiscale generative probabilistic exponential random graph models combined with efficient, distributive message-passing inference techniques can be used to achieve this separation of scales, leading to improved detection accuracy of latent classes as demonstrated on benchmark problems. It sheds new light on the statistical significance of motif-distributions in neural networks and improves the link-prediction accuracy as exemplified for gene-disease associations in the highly consequential Online Mendelian Inheritance in Man database.}, subject = {Netzwerk}, language = {en} } @article{BeckerLatussekHeinkeetal.1993, author = {Becker, Charles, R. and Latussek, V. and Heinke, H. and Regnet, M. M. and Goschenhofer, F. and Einfeldt, S. and He, L. and Bangert, E. and Kraus, M. M. and Landwehr, G.}, title = {Molecular beam epitaxial growth and characterization of (001) Hg\(_{1-x}\) Cd\(_x\) Te-HgTe superlattices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-50959}, year = {1993}, abstract = {The molecular beam epitaxially growth of (001) Hg\(_{1-x}\) Cd\(_z\) Te-HgTe superlattices has been systematically investigated. The well width as well as the period were determined directly by X-ray diffraction. This was accomphshed for the well width by exploiting the high reflectivity from HgTe and the low reflectivity from CdTe for the (002) Bragg reflection. Knowing the well and barrier thicknesses we have been able to set an upper limit on the aver~ge composition of the barriers, Xl, by annealing the superlattice and then measuring the composition of the. resultmg alloy. Xb was shown to decrease exponentially with decreasing barrier width. Xb is appreciably smaller m. narrow barriers due to the increased significance of interdiffusion in the Hg\(_{1-x}\)Cd\(_x\) Te/HgTe interface in narrow barriers. The experimentally determined optical absorption coefficient for these superlattices is compared WIth theoretical calculations. The absorption coefficient was determined from transmission and reflection spectra at 300, 77 and 5 K. Using the thickness and composition of the barriers and wells, and an interface width due to interdiffusion, the complex refractive index is calculated and compared with the experimental absorption coefficient. The envelope function method based on an 8 x 8 second order k . p band model was used to calculate the superlattice states. These results when inserted into Kubo's formula, yield the dynamic conductivity for interband transitions. The experimental and theoretical values for the absorption coefficient using no adjustable parameters are in good agreement for most of the investigated superlattices. Furthermore the agreement for the higher energetic interband transitions is much worse if values for the barrier composition, which are appreciably different than the experimentally determined values, are used. The infrared photoluminescence was investigated at temperatures from 4.2 to 300 K. Pronounced photoluminescence was observed for all superlattices in this temperature range.}, subject = {Physik}, language = {en} } @article{DeciusBeckerFredericks1972, author = {Decius, J. C. and Becker, Charles R. and Fredericks, W. J.}, title = {Force constants of the metaborate ion in alkali halides}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-50935}, year = {1972}, abstract = {No abstract available}, subject = {Physik}, language = {en} } @article{BeckerHeEinfeldtetal.1993, author = {Becker, Charles R. and He, L. and Einfeldt, S. and Wu, Y. S. and L{\´e}rondel, G. and Heinke, H. and Oehling, S. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Molecular beam epitaxial growth and characterization of (100) HgSe on GaAs}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-50947}, year = {1993}, abstract = {In this paper, we present results on the first MBE growth of HgSe. The influence of the GaAs substrate temperature as well as the Hg and Se fluxes on the growth and the electrical properties has been investigated. It has been found that the growth rate is very low at substrate temperatures above 120°C. At 120°C and at lower temperatures, the growth rate is appreciably higher. The sticking coefficient of Se seems to depend inversely on the Hg/Se flux ratio. Epitaxial growth could be maintained at 70°C with Hg/Se flux ratios between lOO and ISO, and at 160°C between 280 and 450. The electron mobilities of these HgSe epilayers at room temperature decrease from a maximum value of 8.2 x 10^3 cm2 /V' s with increasing electron concentration. The concentration was found to be between 6xlO^17 and 1.6x10^19 cm- 3 at room temperature. Rocking curves from X-ray diffraction measurements of the better epilayers have a full width at half maximum of 5S0 arc sec.}, subject = {Physik}, language = {en} } @article{GreinerPolignoneBeckeretal.1992, author = {Greiner, P. and Polignone, L. and Becker, Charles R. and Geick, R.}, title = {Contactless measurement of the conductivity of II-VI epitaxial layers by means of the partially filled waveguide method}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37838}, year = {1992}, abstract = {We report the contactless determination of the conductivity, the mobility and the carrier concentration of II-VI semiconductors by means of the technique of the partially filled waveguide at a microwave frequency of 9 GHz. The samples are CdHgTe epitaxial layers, grown on CdZnTe substrates by molecular beam epitaxy. The conductivity is determined from the transmission coefficient of the sample in the partially filled waveguide. For the analysis of the experimental data, the complex transmission coefficient is calculated by a rigorous multi-mode matching procedure. By varying the conductivity of the sample, we obtain an optimum fit of the calculated data to the experimental results. Comparison with conductivity data determined by the van der Pauw method shows that our method allows to measure the conductivity with good accuracy. The behaviour of the transmission coefficient of the sample is discussed in dependence on the layer conductivity, the layer thickness and the dielectric constant of the substrate. The calculations require to consider in detail the distribution of the electromagnetic fields in the sample region. The usual assumption of a hardly disturbed TE\(_{10}\) mode cannot be used in our case. By applying a magnetic field in extraordinary Voigt configuration. galvanomagnetic measurements have been carried out which yield the mobility and thus the carrier concentration. These results are also in good agreement with van der Pauw transport measurements.}, language = {en} } @article{RoeschAtzmuellerSchaacketal.1994, author = {R{\"o}sch, M. and Atzm{\"u}ller, R. and Schaack, G. and Becker, Charles R.}, title = {Resonant Raman scattering in a zero-gap semiconductor: Interference effects and deformation potentials at the E\(_1\) and E\(_1\) + \(\Delta_1\) gaps of HgTe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38062}, year = {1994}, abstract = {No abstract available}, language = {en} } @article{KrausBeckerScholletal.1993, author = {Kraus, M. M. and Becker, Charles R. and Scholl, S. and Wu, Y. S. and Yuan, S. and Landwehr, G.}, title = {Infrared photoluminescence on molecular beam epitaxially grown Hg\(_{1-x}\)Cd\(_x\)Te layers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38053}, year = {1993}, abstract = {No abstract available}, language = {en} } @article{HeBeckerBicknellTassiusetal.1993, author = {He, L. and Becker, Charles R. and Bicknell-Tassius, R. N. and Scholl, S. and Landwehr, G.}, title = {Molecular beam epitaxial growth of (100) Hg\(_{0.8}\)Cd\(_{0.2}\)Te on Cd\(_{0.96}\)Zn\(_{0.04}\)Te}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38044}, year = {1993}, abstract = {No abstract available}, language = {en} } @article{WuBeckerWaagetal.1993, author = {Wu, Y. S. and Becker, Charles R. and Waag, A. and von Schierstedt, K. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Surface sublimation of zinc blende CdTe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37829}, year = {1993}, abstract = {The surface sublimation of Cd and Te atoms from the zinc blende (111)A CdTe surface has been investigated in detail by reflection high energy electron diffraction and x-ray photoelectron spectroscopy. These experiments verify that Te is much easier to evaporate than Cd. The experimental value for the Te activation energy from a Te stabilized (111)A CdTe surface is 1.41 ±0.1O eV, which is apparently inconsistent with recent theoretical results.}, language = {en} } @article{WuBeckerWaagetal.1992, author = {Wu, Y. S. and Becker, Charles R. and Waag, A. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Thermal effects on (100) CdZnTe substrates as studied by x-ray photoelectron spectroscopy and reflection high energy electron diffraction}, issn = {0003-6951}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37801}, year = {1992}, abstract = {The influence of different CdZnTe substrate treatments prior to II-VI molecular beam epitaxial growth on surface stoichiometry, oxygen, and carbon contamination has been studied using x-ray photoelectron spectroscopy and reflection high energy electron diffraction. Heating the substrate at 300 °C can eliminate oxygen contamination, but cannot completely remove carbon from the surface. Heating at higher temperatures decreases the carbon contamination only slightly, while increasing the Zn-Cd ratio on the surface considerably. The magnitude of the latter effect is surprising and is crucial when one is using lattice matched CdZnTe (Zn 4\%) substrates.}, language = {en} } @article{WuBeckerWaagetal.1991, author = {Wu, Y.S. and Becker, Charles R. and Waag, A. and Kraus, M. M. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Correlation of the Cd-to-Te ratio on CdTe surfaces with the surface structure}, isbn = {0163-1829}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37789}, year = {1991}, abstract = {We report here that reconstruction on (100), (1lIlA, and (1l1lB CdTe surfaces is either C(2X2), (2X2), and (l X I) or (2X I), (l X I), and (l X I) when they are Cd or Te stabilized, respectively. There is a mixed region between Cd and Te stabilization in which the reflected high-energy electron-diffraction (RHEED) patterns contain characteristics of both Cd- and Te-stabilized surfaces. We have also found that the Cd-to-Te ratio of the x-ray photoelectron intensities of their 3d\(_{3/ 2}\) core levels is about 20\% larger for a Cd-stabilized (1lIlA, (1lIlB, or (100) CdTe surface than for a Te-stabilized one. According to a simple model calculation, which was normalized by means of the photoelectron intensity ratio of a Cd-stabilized (lll)A and aTe-stabilized (1l1lB CdTe surface, the experimental data for CdTe surfaces can be explained by a linear dependence of the photoelectron-intensity ratio on the fraction of Cd in the uppermost monatomic layer. This surface composition can be correlated with the surface structure, i.e., the corresponding RHEED patterns. This correlation can in turn be employed to determine Te and Cd evaporation rates. The Te reevaporation rate is increasingly slower for the Te-stabilized (Ill) A, (l1l)B, and (100) surfaces, while the opposite is true for Cd from Cd-stabilized (Ill) A and (Ill)B surfaces. In addition, Te is much more easily evaporated from all the investigated surfaces than is Cd, if the substrate is kept at normal molecular-beam-epitaxy growth temperatures ranging from 2oo·C to 300 ·C.}, subject = {Festk{\"o}rperphysik}, language = {en} } @article{QiuHeLietal.1993, author = {Qiu, Yueming and He, Li and Li, Jie and Yuan, Shixin and Becker, Charles R. and Landwehr, G.}, title = {Infrared photoconductor fabricated with HgTe/CdTe superlattice grown by molecular beam epitaxy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37772}, year = {1993}, abstract = {An infrared photoconductor fabricated with a HgTe/CdTe superlattice grown on a GaAs substrate by molecular beam epitaxy is described here for the first time. The growth procedure, device fabrication, and measurement results are described. The results show that the device has relatively high uniformity and 1000 K black-body detectivity 2.4 X 10\(^9\) cm Hz\(^{1/2}\) W\(^{-1}\) . The photoconductivity decay method was used for determining carrier lifetime of the HgTe/CdTe superlattice, the measured lifetime is 12\(\mu\)s at 77 K, which is the longest lifetime ever reported for HgTe/CdTe superlattices and we believe that the increase of lifetime is mainly due to the reduction of dimensions.}, language = {en} } @article{ToenniesBacherForcheletal.1994, author = {T{\"o}nnies, D. and Bacher, G. and Forchel, Alfred and Waag, A. and Litz, Th. and Hommel, D. and Becker, Charles R. and Landwehr, G. and Heuken, M. and Scholl, M.}, title = {Optical study of interdiffusion in CdTe and ZnSe based quantum wells}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37750}, year = {1994}, abstract = {No abstract available}, language = {en} } @article{BeckerHeRegnetetal.1993, author = {Becker, Charles R. and He, L. and Regnet, M. M. and Kraus, M.M. and Wu, Y. S. and Landwehr, G. and Zhang, X. F. and Zhang, H.}, title = {The growth and structure of short period (001) Hg\(_{1-x}\)Cd\(_x\)Te-HgTe superlattices}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37858}, year = {1993}, abstract = {Molecular beam epitaxially grown short period (001) Hg\(_{1_x}\)Cd\(_x\)Te-HgTe superlattices have been systematically investigated. Several narrow well widths were chosen, e.g., 30, 35 and 40 {\AA}, and the barrier widths were varied between 24 and 90 {\AA} for a particular well width. Both the well width and the total period were determined directly by means of x-ray diffraction. The well width was determined by exploiting the high reflectivity from HgTe and the low reflectivity from CdTe for the (002) Bragg reflection. Knowing the well and barrier widths we have been able to set an upper limit on the average Cd concentration of the barriers, \(\overline x_b\), by annealing several superlattices and then measuring the composition of the resulting alloy. \(\overline x_b\) was shown to decrease exponentially with decreasing barrier width. The structure of a very short period superlattice, i.e., 31.4 {\AA}, was also investigated by transmission electron microscopy, corroborating the x-ray diffraction results.}, language = {en} } @article{WuBeckerWaagetal.1993, author = {Wu, Y. S. and Becker, Charles R. and Waag, A. and Schmiedl, R. and Einfeldt, S. and Landwehr, G.}, title = {Oxygen on the (100) CdTe surface}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37869}, year = {1993}, abstract = {We have investigated oxygen on CdTe substrates by means of x-ray photoelectron spectroscopy (XPS) and reflection high-energy electron diffraction (RHEED). A Te oxide layer that was at least 15 A thick was found on the surface of as-delivered CdTe substrates that were mechanically polished. This oxide is not easily evaporated at temperatures lower than 350°C. Furthermore, heating in air, which further oxidizes the CdTe layer, should be avoided. Etching with HCI acid (15\% HCl) for at least 20 s and then rinsing with de-ionized water reduces the Te oxide layer on the surface down to 4\% of a monoatomic layer. However, according to XPS measurements of the 0 Is peak, 20\%-30\% of a monoatomic layer of oxygen remains on the surface, which can be eliminated by heating at temperatures ranging between 300 and 340 cC. The RHEED patterns for a molecular beam epitaxially (MBE)-grown CdTe film on a (lOO) CdTe substrate with approximately one monoatomic layer of oxidized Te on the surface lose the characteristics of the normal RHEED pattems for a MBE-grown CdTe film on an oxygen-free CdTe substrate.}, language = {en} } @article{KrausRegnetBeckeretal.1992, author = {Kraus, M. M. and Regnet, M. M. and Becker, Charles R. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Comparison of band structure calculations and photoluminescence experiments on HgTe/CdTe superlattices grown by molecular beam epitaxy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37878}, year = {1992}, abstract = {We have grown HgTe/CdTe superlattices by molecular beam epitaxy; barrier thicknesses were in the range from 15 to 91 {\AA} and the well thickness was maintained at a constant value of 30 {\AA}. The infrared photoluminescence was investigated by means of Fourier transform infrared spectroscopy in the temperature range from 4.2 to 300 K. All superlattices showed pronounced photoluminescence at temperatures up to 300 K. To gain more detailed insight into the band structure of the HgTe/CdTe superlattices, band structure calculations were performed. The concept of the envelope function approximation was followed. Employing the transfer matrix method, the calculations were completed taking into account an eight band k·p model. An important parameter in these calculations is the natural valence band offset (VBO) between the well and barrier materials. As a general trend, the value for the direct gap decreases with increasing VBO. The experimentally determined energies of the band gap are in reasonable agreement with the values obtained by the theoretical calculations. A comparison between theory and experiment shows that the observed transition energies are closer to calculations employing a large offset (350 meV) as opposed to a small VBO (40 meV).}, language = {en} } @article{HerrmannHappMoellmannetal.1993, author = {Herrmann, K. H. and Happ, M. and M{\"o}llmann, K.-P. and Tomm, J. W. and Becker, Charles R. and Kraus, M. M. and Yuan, S. and Landwehr, G.}, title = {A new model for the absorption coefficient of narrow gap (Hg,Cd)Te that simultaneously considers band tails and band filling}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37894}, year = {1993}, abstract = {A semiempirical model is presented that correlates the broadening of the absorption edge with both transitions below the energy gap and with transitions by the Kane band model. This model correctly fits both the absorption and luminescence spectra of narrow-gap (Hg,Cd)Te samples that have been grown by the traveling heater method as well as by molecular-beam epitaxy. The accuracy of the band-gap determination is enhanced by this model.}, language = {en} } @article{WaagHeinkeScholletal.1993, author = {Waag, A. and Heinke, H. and Scholl, S. and Becker, Charles R. and Landwehr, G.}, title = {Growth of MgTe and Cd\(_{1-x}\)Mg\(_x\)Te thin films by molecular beam epitaxy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37917}, year = {1993}, abstract = {We report on the growth of the compound semiconductor MgTe as weil as the ternary alloy Cd\(_{l-x}\)Mg, Te by molecular hcam cpitaxy. This is to our knowkdgc thc first time that this material has heen grown by any epitaxial technique. Bulk MgTe, which is hygroscopic, has a band gap of 3.0 eV and crystallizcs usually in thc wurtzite structure. Pseudomorphic films were grown on zincblende Cd Te suhstrates for a MgTe thickness helow a critical layer thickncss of approximately 500 nm. In addition, Cd\(_{l_x}\),Mg\(_x\)Te epilayers were grown with a Mg concentration between 0 and 68\%, which corresponds to a band gap betwcen 1.5 and 2.5 eV at room temperature. The crystalline quality of thc layers is comparabk to CdTc thin films as long as they are fully strained. The lauice constant of zincblende MgTe is slightly smaller than that of CdTe, and the lattice mismatch is as low as O.7\%. In addition highly n-type CdMgTe layers were fabricatcd by hromine doping. The tunability of the band gap as weil as the rather good laUice match with CdTc makes the matcrial interesting for optoelectronic device applications for the entire visible range.}, language = {en} } @article{ShanjiaXinzhangGreineretal.1992, author = {Shanjia, Xu and Xinzhang, Wu and Greiner, P. and Becker, Charles R. and Geick, R.}, title = {Microwave transmission and reflection of stratified lossy dielectric segments partially filled waveguide}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37958}, year = {1992}, abstract = {The microwave transmission and reßection is evaluated for stratified lossy dielectric segments partially filling the rectangular waveguide by the method which combines the multimode network theory with the rigorous mode matching procedure. As an example, we investigate in detail the microwave scattering properties of II-VI-epitaxial layer on a lossy dielectric substrate inserted in the rectangular waveguide. The experimental data verify the accuracy and the effectiveness of the present method. Extensive numerical results are presented to establish useful guidelines for the contactless microwave measurement of the conductivity of the epitaxiallayer.}, language = {en} } @article{ShanjiaXinzhangBoegeetal.1993, author = {Shanjia, Xu and Xinzhang, Wu and Boege, P. and Sch{\"a}fer, H. and Becker, Charles R. and Geick, R.}, title = {Scattering characteristics of 3-D discontinuity consisting of semiconductor sample filled in waveguide with gaps}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37964}, year = {1993}, abstract = {No abstract available}, language = {en} } @article{HeBeckerBicknellTassiusetal.1993, author = {He, L. and Becker, Charles R. and Bicknell-Tassius, R. N. and Scholl, S. and Landwehr, G.}, title = {Molecular beam epitaxial growth and evaluation of intrinsic and extrinsically doped (100) Hg\(_{0.8}\)Cd\(_{0.2}\)Te on (100) Cd\(_{0.96}\)Zn\(_{0.04}\)Te}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37885}, year = {1993}, abstract = {No abstract available.}, language = {en} } @article{SchikoraHausleitnerEinfeldtetal.1994, author = {Schikora, D. and Hausleitner, H. and Einfeldt, S. and Becker, Charles R. and Widmer, T. and Giftige, C. and Lischka, K. and von Ortenburg, M. and Landwehr, G.}, title = {Epitaxial overgrowth of II-VI compounds on patterned substrates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37985}, year = {1994}, abstract = {The selected area epitaxial overgrowth of narrow gap HgTe as well as wide gap CdTe and ZnTe on CdTe/GaAs substrates, which had been structured by dry etching techniques, has been investigated. A plasma etching process using a barrel reactor with CH\(_4\)-CH\(_2\) gases has been employed to prepare stripes with a width of about 1 μm with anisotropic as well as isotropic etching profiles. It has been found, that the selected area HgTe overgrowth takes place with a high local selectivity to the low index planes of the patterned surface. In contrast, the selected area overgrowth of the wide gap CdTe and ZnTe is controlled by anisotropic growth kinetics provided that the substrate temperature is not lower than 220°C and the starting surface consists of well developed low index crystallographic planes.}, language = {en} } @article{EinfeldtHeinkeBehringeretal.1994, author = {Einfeldt, S. and Heinke, H. and Behringer, M. and Becker, Charles R. and Kurtz, E. and Hommel, D. and Landwehr, G.}, title = {The growth of HgSe by molecular beam epitaxy for ohmic contacts to p-ZnSe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38001}, year = {1994}, abstract = {The structural properties of HgSe grown by molecular beam epitaxy (MBE) are investigated for different lattice mismatches to the substrate and various growth conditions. The growth rate is shown to depend strongly on the growth temperature above lOO°C as well as on the Hg/Se flux ratio. It has been found that the crystalline perfection and the electrical properties are mainly determined by the layer thickness, especially for the growth on highly lattice mismatched substrates. Changes in the surface morphology are related to growth parameters. Differences between the electrical behavior of MBE-grown and bulk HgSe are discussed. The electrical properties of HgSe contacts on p-ZnSe are investigated as a function of different annealing procedures.}, language = {en} } @article{WuBeckerWaagetal.1993, author = {Wu, Y. S. and Becker, Charles R. and Waag, A. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Removal of oxygen and reduction of carbon contamination on (100) Cd\(_{0.96}\)Zn\(_{0.04}\)Te}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38014}, year = {1993}, abstract = {No abstract available}, language = {en} } @article{ZhangBeckerZhangetal.1994, author = {Zhang, X. F. and Becker, Charles R. and Zhang, H. and He, L. and Landwehr, G.}, title = {Investigation of a short period (001) HgTe-Hg\(_{0.6}\)Cd\(_{0.4}\)Te superlattice by transmission electron microscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-38029}, year = {1994}, abstract = {No abstract available}, language = {en} } @article{BeckerMartin1972, author = {Becker, Charles R. and Martin, T. P.}, title = {Infrared absorption by Impurity-pair resonant modes in NaCl:F}, isbn = {1098-0121}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37840}, year = {1972}, abstract = {New resonant-mode infrared absorption lines have been observed in NaCl with high concentrations of fluorine impurities. The quadratic concentration dependence of the strength of these lines indicates that they are due to pairs of fluorine impurities. At the resonant frequencies, the motion of some host ions appears to be as important as the motion of the impurities themselves.}, subject = {Festk{\"o}rperphysik}, language = {en} } @article{BeckerNath1970, author = {Becker, Charles R. and Nath, G.}, title = {Optical properties of LiIO\(_3\) in the far infrared}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37905}, year = {1970}, abstract = {No abstract available}, language = {en} } @article{TackeSchuberthBeckeretal.1982, author = {Tacke, M. and Schuberth, W. and Becker, Charles R. and Haas, L. D.}, title = {The dielectric constant of PbTe at 4.2 K and \(\tilde ν\)=84.15 cm\(^{-1}\), 96.97 cm\(^{-1}\), 103.60 cm\(^{-1}\)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30821}, year = {1982}, abstract = {The dielectric constant of a PbTe epitaxial layer has been measured by surface wave spectroscopy using an optically pumped far-infrared laser and the technique of attenuated total reflection.}, language = {en} } @article{GeisGeickBeckeretal.1977, author = {Geis, G. and Geick, R. and Becker, Charles R. and Wagner, V.}, title = {Antiferromagnetic resonance in CoO/NiO mixed crystals}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-31239}, year = {1977}, abstract = {We have studied the lowest magnetic excitation of Ni\(_{1-x}\)Co\(_x\)O mixed crystals for 0.94 \(\leq\) x \(\leq\) 1. Together with previous results for 0.02 \(\leq\) x \(\leq\) 0.07 and neutron data for x = 0.14 and x = 0.30, the results are discussed by means of a model, especially the variation of AFMR frequency and preferred spin direction with Co concentration x.}, language = {en} } @article{Becker1970, author = {Becker, Charles R.}, title = {Impurity-induced absorption in or near the phonon gap of KI}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30757}, year = {1970}, abstract = {In or near the phonon gap of KI a single weak line due to OW (OD\(^-\)) at 69.7 (69.3) cm\(^{-1}\) has been observed. A second and much stronger line at 94.1 cm\(^{-1}\) was shown not to be related to OH\(^-\), but instead is thought to be due to CO\(_3\).}, language = {en} } @article{KoehlerBecker1974, author = {K{\"o}hler, H. and Becker, Charles R.}, title = {Optically active lattice vibrations in Bi\(_2\)Se\(_3\)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-31296}, year = {1974}, abstract = {The preparation of Bi2Sea single crystals with low free carrier densities allowed an investigation of the lattice vibrations to be carried out from the reflectivity of cleavage planes at nearly normal incidence of the radiation (E ~ c). The experimental results ean be explained with two classical oscillators, whose eigenfrequencies oceur at 92 and 69.5 cm-I. The static dielectric constant was determined to be 100 ± 10 for E ~ c.}, language = {en} } @article{KlitzingBecker1976, author = {Klitzing, K. von and Becker, Charles R.}, title = {Far infrared photoconductivity of residual acceptors in pure tellurium}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-31278}, year = {1976}, abstract = {The photoconductivity of both undeformed and deformed Te samples has been investigated at liquid He temperature by means of a Fourier spectrometer. Three peaks were usually found in the spectra of undeformed samples at 11, 24 and 46 cm\(^{-1}\). These are shown to be due to three different chemical impurities. The deformed samples are characterized by additional structure at higher frequencies.}, language = {en} } @article{Becker1971, author = {Becker, Charles R.}, title = {Evidence for a quasi-phonon gap in CsCl}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30767}, year = {1971}, abstract = {The observed impurity induced far-infrared absorption in CsCl : Rb\(^+\) and CsCl : K\(^+\) is compared with a calculated density of acoustic phonon states in CsCl. The absorption due to CsCl : Rb\(^+\) displays a minimum between the acoustic and optic phonon bands. A narrow line is observed in CsCl: K\(^+\) at 85.8 cm\(^{-1}\) which falls in this quasi-phonon gap.}, language = {en} } @article{SchubertKrausKenkliesetal.1992, author = {Schubert, D.W. and Kraus, M.M and Kenklies, R. and Becker, Charles R. and Bicknell-Tassius, R.N.}, title = {Composition and wavelength dependence of the refractive index in Cd\(_{1-x}\)Mn\(_x\)Te epitaxial layers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37716}, year = {1992}, abstract = {We have investigated Cd\(_{1-x}\)Mn\(_x\)Te thin films with Mn concentrations of x=0.12, 0.18, 0.30, 0.52, and 0.70. These single crystal layers were grown by molecular beam epitaxy on [001] CdTe substrates. The real part of the refractive index, n, was determined below the band-gap Eo in the range of 0.5-2.5 eV at T=300 K. The parallel reOectivity was measured near the Brewster angle at the YAG laser wavelength of 1.064 J.Lm (hv= 1.165 eV). Combining these results with the optical pathlength results (nd) of reOection measurements in a Fourier spectrometer we have determined n(x,v) over a wide spectral range by utilizing a three parameter fit. The accuracy of these results for n should improve waveguide designs based on this material.}, language = {en} } @article{WuBeckerWaagetal.1991, author = {Wu, Y. S. and Becker, Charles R. and Waag, A. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {The effects of laser illumination and high energy electrons on molecular-beam epitaxial growth of CdTe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30795}, year = {1991}, abstract = {We report the results of a detailed investigation on the Te-stabilized (2 x 1) and the Cdstabilized c( 2 X 2) surfaces of ( 100) CdTe substrates. The investigation demonstrates for the first time that both laser illumination and, to a greater extent, high-energy electron irradiation increase the Te desorption and reduce the Cd desorption from ( 100) CdTe surfaces. Thus it is possible by choosing the proper growth temperature and photon or electron fluxes to change the surface reconstruction from the normally Te-stabilized to a Cd-stabilized phase.}, language = {en} } @article{BeckerWuWaagetal.1991, author = {Becker, Charles R. and Wu, Y. S. and Waag, A. and Kraus, M. M. and Landwehr, G.}, title = {The orientation independence of the CdTe-HgTe valence band offset as determined by x-ray photoelectron spectroscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30784}, year = {1991}, abstract = {No abstract available}, language = {en} } @article{BeckerLauGEICKetal.1975, author = {Becker, Charles R. and Lau, Ph. and GEICK, R. and Wagner, V.}, title = {Antiferromagnetic Resonance in NiO:Co\(^{2+}\) and NiO:Fe\(^{2+}\)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-30772}, year = {1975}, abstract = {No abstract available.}, language = {en} }