@article{FroehlichPapenfortBergeretal.2012, author = {Fr{\"o}hlich, Kathrin S. and Papenfort, Kai and Berger, Allison A. and Vogel, J{\"o}rg}, title = {A conserved RpoS-dependent small RNA controls the synthesis of major porin OmpD}, series = {Nucleic Acids Research}, volume = {40}, journal = {Nucleic Acids Research}, number = {8}, doi = {10.1093/nar/gkr1156}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-134230}, pages = {3623-3640}, year = {2012}, abstract = {A remarkable feature of many small non-coding RNAs (sRNAs) of Escherichia coli and Salmonella is their accumulation in the stationary phase of bacterial growth. Several stress response regulators and sigma factors have been reported to direct the transcription of stationary phase-specific sRNAs, but a widely conserved sRNA gene that is controlled by the major stationary phase and stress sigma factor, Sigma(S) (RpoS), has remained elusive. We have studied in Salmonella the conserved SdsR sRNA, previously known as RyeB, one of the most abundant stationary phase-specific sRNAs in E. coli. Alignments of the sdsR promoter region and genetic analysis strongly suggest that this sRNA gene is selectively transcribed by Sigma(S). We show that SdsR down-regulates the synthesis of the major Salmonella porin OmpD by Hfq-dependent base pairing; SdsR thus represents the fourth sRNA to regulate this major outer membrane porin. Similar to the InvR, MicC and RybB sRNAs, SdsR recognizes the ompD mRNA in the coding sequence, suggesting that this mRNA may be primarily targeted downstream of the start codon. The SdsR-binding site in ompD was localized by 3'-RACE, an experimental approach that promises to be of use in predicting other sRNA-target interactions in bacteria.}, language = {en} } @article{LibreSeisslerGuerreroetal.2021, author = {Libre, Camille and Seissler, Tanja and Guerrero, Santiago and Batisse, Julien and Verriez, C{\´e}dric and Stupfler, Benjamin and Gilmer, Orian and Cabrera-Rodriguez, Romina and Weber, Melanie M. and Valenzuela-Fernandez, Agustin and Cimarelli, Andrea and Etienne, Lucie and Marquet, Roland and Paillart, Jean-Christophe}, title = {A conserved uORF regulates APOBEC3G translation and is targeted by HIV-1 Vif protein to repress the antiviral factor}, series = {Biomedicines}, volume = {10}, journal = {Biomedicines}, number = {1}, issn = {2227-9059}, doi = {10.3390/biomedicines10010013}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-252147}, year = {2021}, abstract = {The HIV-1 Vif protein is essential for viral fitness and pathogenicity. Vif decreases expression of cellular restriction factors APOBEC3G (A3G), A3F, A3D and A3H, which inhibit HIV-1 replication by inducing hypermutation during reverse transcription. Vif counteracts A3G at several levels (transcription, translation, and protein degradation) that altogether reduce the levels of A3G in cells and prevent its incorporation into viral particles. How Vif affects A3G translation remains unclear. Here, we uncovered the importance of a short conserved uORF (upstream ORF) located within two critical stem-loop structures of the 5′ untranslated region (5′-UTR) of A3G mRNA for this process. A3G translation occurs through a combination of leaky scanning and translation re-initiation and the presence of an intact uORF decreases the extent of global A3G translation under normal conditions. Interestingly, the uORF is also absolutely required for Vif-mediated translation inhibition and redirection of A3G mRNA into stress granules. Overall, we discovered that A3G translation is regulated by a small uORF conserved in the human population and that Vif uses this specific feature to repress its translation.}, language = {en} } @article{HaackHauckKlingenbergetal.2021, author = {Haack, J. and Hauck, C. and Klingenberg, C. and Pirner, M. and Warnecke, S.}, title = {A Consistent BGK Model with Velocity-Dependent Collision Frequency for Gas Mixtures}, series = {Journal of Statistical Physics}, volume = {184}, journal = {Journal of Statistical Physics}, number = {3}, issn = {1572-9613}, doi = {10.1007/s10955-021-02821-2}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-269146}, pages = {31}, year = {2021}, abstract = {We derive a multi-species BGK model with velocity-dependent collision frequency for a non-reactive, multi-component gas mixture. The model is derived by minimizing a weighted entropy under the constraint that the number of particles of each species, total momentum, and total energy are conserved. We prove that this minimization problem admits a unique solution for very general collision frequencies. Moreover, we prove that the model satisfies an H-Theorem and characterize the form of equilibrium.}, language = {en} } @article{HirschKraussOpferkuchetal.2016, author = {Hirsch, Martin and Krauss, Manuel E. and Opferkuch, Toby and Porod, Werner and Staub, Florian}, title = {A constrained supersymmetric left-right model}, series = {JOURNAL OF HIGH ENERGY PHYSICS}, volume = {03}, journal = {JOURNAL OF HIGH ENERGY PHYSICS}, number = {009}, doi = {10.1007/JHEP03(2016)009}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-168016}, year = {2016}, abstract = {We present a supersymmetric left-right model which predicts gauge coupling unification close to the string scale and extra vector bosons at the TeV scale. The subtleties in constructing a model which is in agreement with the measured quark masses and mixing for such a low left-right breaking scale are discussed. It is shown that in the constrained version of this model radiative breaking of the gauge symmetries is possible and a SM-like Higgs is obtained. Additional CP-even scalars of a similar mass or even much lighter are possible. The expected mass hierarchies for the supersymmetric states differ clearly from those of the constrained MSSM. In particular, the lightest down-type squark, which is a mixture of the sbottom and extra vector-like states, is always lighter than the stop. We also comment on the model's capability to explain current anomalies observed at the LHC.}, language = {en} } @article{FakhriLatifi2021, author = {Fakhri, Seyed Arvin and Latifi, Hooman}, title = {A consumer grade UAV-based framework to estimate structural attributes of coppice and high oak forest stands in semi-arid regions}, series = {Remote Sensing}, volume = {13}, journal = {Remote Sensing}, number = {21}, issn = {2072-4292}, doi = {10.3390/rs13214367}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-248469}, year = {2021}, abstract = {Semi-arid tree covers, in both high and coppice growth forms, play an essential role in protecting water and soil resources and provides multiple ecosystem services across fragile ecosystems. Thus, they require continuous inventories. Quantification of forest structure in these tree covers provides important measures for their management and biodiversity conservation. We present a framework, based on consumer-grade UAV photogrammetry, to separately estimate primary variables of tree height (H) and crown area (A) across diverse coppice and high stands dominated by Quercus brantii Lindl. along the latitudinal gradient of Zagros mountains of western Iran. Then, multivariate linear regressions were parametrized with H and A to estimate the diameter at breast height (DBH) of high trees because of its importance to accelerate the existing practical DBH inventories across Zagros Forests. The estimated variables were finally applied to a model tree aboveground biomass (AGB) for both vegetative growth forms by local allometric equations and Random Forest models. In each step, the estimated variables were evaluated against the field reference values, indicating practically high accuracies reaching root mean square error (RMSE) of 0.68 m and 4.74 cm for H and DBH, as well as relative RMSE < 10\% for AGB estimates. The results generally suggest an effective framework for single tree-based attribute estimation over mountainous, semi-arid coppice, and high stands.}, language = {en} } @article{JainVelezAcostaetal.2012, author = {Jain, M. and V{\´e}lez, J. I. and Acosta, M. T. and Palacio, L. G. and Balog, J. and Roessler, E. and Pineda, D. and Londo{\~n}o, A. C. and Palacio, J. D. and Arbelaez, A. and Lopera, F. and Elia, J. and Hakonarson, H. and Seitz, C. and Freitag, C. M. and Palmason, H. and Meyer, J. and Romanos, M. and Walitza, S. and Hemminger, U. and Warnke, A. and Romanos, J. and Renner, T. and Jacob, C. and Lesch, K.-P. and Swanson, J. and Castellanos, F. X. and Bailey-Wilson, J. E. and Arcos-Burgos, M. and Muenke, M.}, title = {A cooperative interaction between LPHN3 and 11q doubles the risk for ADHD}, series = {Molecular Psychiatry}, volume = {17}, journal = {Molecular Psychiatry}, doi = {10.1038/mp.2011.59}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-125128}, pages = {741-747}, year = {2012}, abstract = {In previous studies of a genetic isolate, we identified significant linkage of attention deficit hyperactivity disorder (ADHD) to 4q, 5q, 8q, 11q and 17p. The existence of unique large size families linked to multiple regions, and the fact that these families came from an isolated population, we hypothesized that two-locus interaction contributions to ADHD were plausible. Several analytical models converged to show significant interaction between 4q and 11q (P<1 × 10-8) and 11q and 17p (P<1 × 10-6). As we have identified that common variants of the LPHN3 gene were responsible for the 4q linkage signal, we focused on 4q-11q interaction to determine that single-nucleotide polymorphisms (SNPs) harbored in the LPHN3 gene interact with SNPs spanning the 11q region that contains DRD2 and NCAM1 genes, to double the risk of developing ADHD. This interaction not only explains genetic effects much better than taking each of these loci effects by separated but also differences in brain metabolism as depicted by proton magnetic resonance spectroscopy data and pharmacogenetic response to stimulant medication. These findings not only add information about how high order genetic interactions might be implicated in conferring susceptibility to develop ADHD but also show that future studies of the effects of genetic interactions on ADHD clinical information will help to shape predictive models of individual outcome.}, language = {en} } @article{KarakStepanenkoAddicoatetal.2022, author = {Karak, Suvendu and Stepanenko, Vladimir and Addicoat, Matthew A. and Keßler, Philipp and Moser, Simon and Beuerle, Florian and W{\"u}rthner, Frank}, title = {A Covalent Organic Framework for Cooperative Water Oxidation}, series = {Journal of the American Chemical Society}, volume = {144}, journal = {Journal of the American Chemical Society}, number = {38}, issn = {0002-7863}, doi = {10.1021/jacs.2c07282}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-287591}, pages = {17661-17670}, year = {2022}, abstract = {The future of water-derived hydrogen as the "sustainable energy source" straightaway bets on the success of the sluggish oxygen-generating half-reaction. The endeavor to emulate the natural photosystem II for efficient water oxidation has been extended across the spectrum of organic and inorganic combinations. However, the achievement has so far been restricted to homogeneous catalysts rather than their pristine heterogeneous forms. The poor structural understanding and control over the mechanistic pathway often impede the overall development. Herein, we have synthesized a highly crystalline covalent organic framework (COF) for chemical and photochemical water oxidation. The interpenetrated structure assures the catalyst stability, as the catalyst's performance remains unaltered after several cycles. This COF exhibits the highest ever accomplished catalytic activity for such an organometallic crystalline solid-state material where the rate of oxygen evolution is as high as ∼26,000 μmol L\(^{-1}\) s\(^{-1}\) (second-order rate constant k ≈ 1650 μmol L s\(^{-1}\) g\(^{-2}\)). The catalyst also proves its exceptional activity (k ≈ 1600 μmol L s\(^{-1}\) g\(^{-2}\)) during light-driven water oxidation under very dilute conditions. The cooperative interaction between metal centers in the crystalline network offers 20-30-fold superior activity during chemical as well as photocatalytic water oxidation as compared to its amorphous polymeric counterpart.}, language = {en} } @article{StaigerCadotKooteretal.2012, author = {Staiger, Christine and Cadot, Sidney and Kooter, Raul and Dittrich, Marcus and M{\"u}ller, Tobias and Klau, Gunnar W. and Wessels, Lodewyk F. A.}, title = {A Critical Evaluation of Network and Pathway-Based Classifiers for Outcome Prediction in Breast Cancer}, series = {PLoS One}, volume = {7}, journal = {PLoS One}, number = {4}, doi = {10.1371/journal.pone.0034796}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131323}, pages = {e34796}, year = {2012}, abstract = {Recently, several classifiers that combine primary tumor data, like gene expression data, and secondary data sources, such as protein-protein interaction networks, have been proposed for predicting outcome in breast cancer. In these approaches, new composite features are typically constructed by aggregating the expression levels of several genes. The secondary data sources are employed to guide this aggregation. Although many studies claim that these approaches improve classification performance over single genes classifiers, the gain in performance is difficult to assess. This stems mainly from the fact that different breast cancer data sets and validation procedures are employed to assess the performance. Here we address these issues by employing a large cohort of six breast cancer data sets as benchmark set and by performing an unbiased evaluation of the classification accuracies of the different approaches. Contrary to previous claims, we find that composite feature classifiers do not outperform simple single genes classifiers. We investigate the effect of (1) the number of selected features; (2) the specific gene set from which features are selected; (3) the size of the training set and (4) the heterogeneity of the data set on the performance of composite feature and single genes classifiers. Strikingly, we find that randomization of secondary data sources, which destroys all biological information in these sources, does not result in a deterioration in performance of composite feature classifiers. Finally, we show that when a proper correction for gene set size is performed, the stability of single genes sets is similar to the stability of composite feature sets. Based on these results there is currently no reason to prefer prognostic classifiers based on composite features over single genes classifiers for predicting outcome in breast cancer.}, language = {en} } @article{ReymusStawarczykWinkleretal.2020, author = {Reymus, M. and Stawarczyk, B. and Winkler, A. and Ludwig, J. and Kess, S. and Krastl, G. and Krug, R.}, title = {A critical evaluation of the material properties and clinical suitability of in-house printed and commercial tooth replicas for endodontic training}, series = {International Endodontic Journal}, volume = {53}, journal = {International Endodontic Journal}, number = {10}, doi = {10.1111/iej.13361}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-218085}, pages = {1446 -- 1454}, year = {2020}, abstract = {Aim To assess the suitability of several 3D-printed resins for the manufacturing of tooth replicas for endodontic training in comparison with commercially available replicas by analysing the properties of the materials and comparing them with real teeth during endodontic training. Methodology Tooth replicas were 3D-printed using four resins (NextDent Model, NextDent C\&B, V-Print ee and Vero White Plus) and compared with two commercially available products (VDW and Smile Factory) as well as extracted human teeth. Martens hardness, indentation modulus and radiopacity were investigated on these tooth replicas. Experienced dentists evaluated the suitability of the replicas for endodontic training by comparing them with real teeth in terms of appearance, anatomy, radiopacity, similarity to dentine during access opening, canal gauging and canal instrumentation. Data were analysed using the Kolmogorov-Smirnov and Mann-Whitney U-test. Results The greatest hardness values were recorded for human dentine (P < 0.001), followed by V-Print ee and the commercial tooth replica of Smile Factory. The greatest radiopacity was associated with VOC and dentine (P < 0.001) in comparison with the other materials tested. The appearance of the in-house printed tooth replicas was subjectively evaluated by the dentists as being more realistic than the commercially available products. No differences between the replicas was detected during mechanical instrumentation of root canals. Conclusion None of the tooth replicas were able to simulate human dentine from the perspectives evaluated. V-Print ee had radiopacity comparable with dentine, but its hardness was not comparable with dentine.}, language = {en} } @article{ReussKieselKundeetal.2012, author = {Reuss, Heiko and Kiesel, Andrea and Kunde, Wilfried and W{\"u}hr, Peter}, title = {A cue from the unconscious - masked symbols prompt spatial anticipation}, series = {Frontiers in Psychology}, volume = {3}, journal = {Frontiers in Psychology}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123971}, pages = {397}, year = {2012}, abstract = {Anticipating where an event will occur enables us to instantaneously respond to events that occur at the expected location. Here we investigated if such spatial anticipations can be triggered by symbolic information that participants cannot consciously see. In two experiments involving a Posner cueing task and a visual search task, a central cue informed participants about the likely location of the next target stimulus. In half of the trials, this cue was rendered invisible by pattern masking. In both experiments, visible cues led to cueing effects, that is, faster responses after valid compared to invalid cues. Importantly, even masked cues caused cueing effects, though to a lesser extent. Additionally, we analyzed effects on attention that persist from one trial to the subsequent trial. We found that spatial anticipations are able to interfere with newly formed spatial anticipations and influence orienting of attention in the subsequent trial. When the preceding cue was visible, the corresponding spatial anticipation persisted to an extent that prevented a noticeable effect of masked cues. The effects of visible cues were likewise modulated by previous spatial anticipations, but were strong enough to also exert an impact on attention themselves. Altogether, the results suggest that spatial anticipations can be formed on the basis of unconscious stimuli, but that interfering influences like still active spatial anticipations can suppress this effect.}, language = {en} } @article{BeerJoschinskiSastreetal.2017, author = {Beer, Katharina and Joschinski, Jens and Sastre, Alazne Arrazola and Krauss, Jochen and Helfrich-F{\"o}rster, Charlotte}, title = {A damping circadian clock drives weak oscillations in metabolism and locomotor activity of aphids (Acyrthosiphon pisum)}, series = {Scientific Reports}, volume = {7}, journal = {Scientific Reports}, number = {14906}, doi = {10.1038/s41598-017-15014-3}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-170020}, year = {2017}, abstract = {Timing seasonal events, like reproduction or diapause, is crucial for the survival of many species. Global change causes phenologies worldwide to shift, which requires a mechanistic explanation of seasonal time measurement. Day length (photoperiod) is a reliable indicator of winter arrival, but it remains unclear how exactly species measure day length. A reference for time of day could be provided by a circadian clock, by an hourglass clock, or, as some newer models suggest, by a damped circadian clock. However, damping of clock outputs has so far been rarely observed. To study putative clock outputs of Acyrthosiphon pisum aphids, we raised individual nymphs on coloured artificial diet, and measured rhythms in metabolic activity in light-dark illumination cycles of 16:08 hours (LD) and constant conditions (DD). In addition, we kept individuals in a novel monitoring setup and measured locomotor activity. We found that A. pisum is day-active in LD, potentially with a bimodal distribution. In constant darkness rhythmicity of locomotor behaviour persisted in some individuals, but patterns were mostly complex with several predominant periods. Metabolic activity, on the other hand, damped quickly. A damped circadian clock, potentially driven by multiple oscillator populations, is the most likely explanation of our results.}, language = {en} } @article{WechAnkenbrandBleyetal.2022, author = {Wech, Tobias and Ankenbrand, Markus Johannes and Bley, Thorsten Alexander and Heidenreich, Julius Frederik}, title = {A data-driven semantic segmentation model for direct cardiac functional analysis based on undersampled radial MR cine series}, series = {Magnetic Resonance in Medicine}, volume = {87}, journal = {Magnetic Resonance in Medicine}, number = {2}, doi = {10.1002/mrm.29017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-257616}, pages = {972-983}, year = {2022}, abstract = {Purpose Image acquisition and subsequent manual analysis of cardiac cine MRI is time-consuming. The purpose of this study was to train and evaluate a 3D artificial neural network for semantic segmentation of radially undersampled cardiac MRI to accelerate both scan time and postprocessing. Methods A database of Cartesian short-axis MR images of the heart (148,500 images, 484 examinations) was assembled from an openly accessible database and radial undersampling was simulated. A 3D U-Net architecture was pretrained for segmentation of undersampled spatiotemporal cine MRI. Transfer learning was then performed using samples from a second database, comprising 108 non-Cartesian radial cine series of the midventricular myocardium to optimize the performance for authentic data. The performance was evaluated for different levels of undersampling by the Dice similarity coefficient (DSC) with respect to reference labels, as well as by deriving ventricular volumes and myocardial masses. Results Without transfer learning, the pretrained model performed moderately on true radial data [maximum number of projections tested, P = 196; DSC = 0.87 (left ventricle), DSC = 0.76 (myocardium), and DSC =0.64 (right ventricle)]. After transfer learning with authentic data, the predictions achieved human level even for high undersampling rates (P = 33, DSC = 0.95, 0.87, and 0.93) without significant difference compared with segmentations derived from fully sampled data. Conclusion A 3D U-Net architecture can be used for semantic segmentation of radially undersampled cine acquisitions, achieving a performance comparable with human experts in fully sampled data. This approach can jointly accelerate time-consuming cine image acquisition and cumbersome manual image analysis.}, language = {en} } @article{SivarajanOberwinklerRolletal.2022, author = {Sivarajan, Rinu and Oberwinkler, Heike and Roll, Valeria and K{\"o}nig, Eva-Maria and Steinke, Maria and Bodem, Jochen}, title = {A defined anthocyanin mixture sourced from bilberry and black currant inhibits Measles virus and various herpesviruses}, series = {BMC Complementary Medicine and Therapies}, volume = {22}, journal = {BMC Complementary Medicine and Therapies}, doi = {10.1186/s12906-022-03661-7}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-301423}, year = {2022}, abstract = {Background Anthocyanin-containing plant extracts and carotenoids, such as astaxanthin, have been well-known for their antiviral and anti-inflammatory activity, respectively. We hypothesised that a mixture of Ribes nigrum L. (Grossulariaceae) (common name black currant (BC)) and Vaccinium myrtillus L. (Ericaceae) (common name bilberry (BL)) extracts (BC/BL) with standardised anthocyanin content as well as single plant extracts interfered with the replication of Measles virus and Herpesviruses in vitro. Methods We treated cell cultures with BC/BL or defined single plant extracts, purified anthocyanins and astaxanthin in different concentrations and subsequently infected the cultures with the Measles virus (wild-type or vaccine strain Edmonston), Herpesvirus 1 or 8, or murine Cytomegalovirus. Then, we analysed the number of infected cells and viral infectivity and compared the data to non-treated controls. Results The BC/BL extract inhibited wild-type Measles virus replication, syncytia formation and cell-to-cell spread. This suppression was dependent on the wild-type virus-receptor-interaction since the Measles vaccine strain was unaffected by BC/BL treatment. Furthermore, the evidence was provided that the delphinidin-3-rutinoside chloride, a component of BC/BL, and purified astaxanthin, were effective anti-Measles virus compounds. Human Herpesvirus 1 and murine Cytomegalovirus replication was inhibited by BC/BL, single bilberry or black currant extracts, and the BC/BL component delphinidin-3-glucoside chloride. Additionally, we observed that BC/BL seemed to act synergistically with aciclovir. Moreover, BC/BL, the single bilberry and black currant extracts, and the BC/BL components delphinidin-3-glucoside chloride, cyanidin-3-glucoside, delphinidin-3-rutinoside chloride, and petunidin-3-galactoside inhibited human Herpesvirus 8 replication. Conclusions Our data indicate that Measles viruses and Herpesviruses are differentially susceptible to a specific BC/BL mixture, single plant extracts, purified anthocyanins and astaxanthin. These compounds might be used in the prevention of viral diseases and in addition to direct-acting antivirals, such as aciclovir.}, language = {en} } @article{GrollBurdickChoetal.2019, author = {Groll, J and Burdick, J A and Cho, D-W and Derby, B and Gelinsky, M and Heilshorn, S C and J{\"u}ngst, T and Malda, J and Mironov, V A and Nakayama, K and Ovsianikov, A and Sun, W and Takeuchi, S and Yoo, J J and Woodfield, T B F}, title = {A definition of bioinks and their distinction from biomaterial inks}, series = {Biofabrication}, volume = {11}, journal = {Biofabrication}, number = {1}, doi = {10.1088/1758-5090/aaec52}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-253993}, year = {2019}, abstract = {Biofabrication aims to fabricate biologically functional products through bioprinting or bioassembly (Groll et al 2016 Biofabrication 8 013001). In biofabrication processes, cells are positioned at defined coordinates in three-dimensional space using automated and computer controlled techniques (Moroni et al 2018 Trends Biotechnol. 36 384-402), usually with the aid of biomaterials that are either (i) directly processed with the cells as suspensions/dispersions, (ii) deposited simultaneously in a separate printing process, or (iii) used as a transient support material. Materials that are suited for biofabrication are often referred to as bioinks and have become an important area of research within the field. In view of this special issue on bioinks, we aim herein to briefly summarize the historic evolution of this term within the field of biofabrication. Furthermore, we propose a simple but general definition of bioinks, and clarify its distinction from biomaterial inks.}, language = {en} } @article{GesslerThomasCouillinetal.1989, author = {Gessler, Manfred and Thomas, G. H. and Couillin, P. and Junien, C. and McGillivray, B. C. and Hayden, M. and Jaschek, G. and Bruns, G. A.}, title = {A deletion map of the WAGR region on chromosome II}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-59255}, year = {1989}, abstract = {The WAGR (Wilms tumor, aniridia, genitourinary anomalies, and mental retardation) region has been assigned to chromosome 11p13 on the basis of overlapping constitutional deletions found in affected individuals. We have utilized 31 DNA probes which map to the WAGR deletion region, together with six reference loci and 13 WAGR-related deletions, to subdivide this area into 16 intervals. Specific intervals have been correlated with phenotypic features, leading to the identification of individual subregions for the aniridia and Wilms tumor loci. Delineation, by specific probes, of multiple intervals above and below the critical region and of five intervals within the overlap area provides a framework map for molecular characterization of WAGR gene loci and of deletion boundary regions.}, subject = {Biochemie}, language = {en} } @article{Schamel2017, author = {Schamel, Johannes}, title = {A demographic perspective on the spatial behaviour of hikers in mountain areas: the example of Berchtesgaden National Park}, series = {eco.mont - Journal on Protected Mountain Areas Research and Management}, volume = {9}, journal = {eco.mont - Journal on Protected Mountain Areas Research and Management}, number = {Special issue}, issn = {2073-1558}, doi = {10.1553/eco.mont-9-sis66}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-172128}, pages = {66-74}, year = {2017}, abstract = {In Germany, as in many Western societies, demographic change will lead to a higher number of senior visitors to natural recreational areas and national parks. Given the high physiological requirements of many outdoor recreation activities, especially in mountain areas, it seems likely that demographic change will affect the spatial behaviour of national park visitors, which may pose a challenge to the management of these areas. With the help of GPS tracking and a standardized questionnaire (n=481), this study empirically investigates the spatial behaviour of demographic age brackets in Berchtesgaden National Park (NP) and the potential effects of demographic change on the use of the area. Cluster analysis revealed four activity types in the study area. More than half of the groups with visitors aged 60 and older belong to the activity type of Walker.}, language = {en} } @article{BaeuerleinRiedelBakeretal.2013, author = {B{\"a}uerlein, Carina A. and Riedel, Simone S. and Baker, Jeanette and Brede, Christian and Jord{\´a}n Garrote, Ana-Laura and Chopra, Martin and Ritz, Miriam and Beilhack, Georg F. and Schulz, Stephan and Zeiser, Robert and Schlegel, Paul G. and Einsele, Hermann and Negrin, Robert S. and Beilhack, Andreas}, title = {A diagnostic window for the treatment of acute graft-versus-host disease prior to visible clinical symptoms in a murine model}, series = {BMC Medicine}, journal = {BMC Medicine}, doi = {10.1186/1741-7015-11-134}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96797}, year = {2013}, abstract = {Background Acute graft-versus-host disease (aGVHD) poses a major limitation for broader therapeutic application of allogeneic hematopoietic cell transplantation (allo-HCT). Early diagnosis of aGVHD remains difficult and is based on clinical symptoms and histopathological evaluation of tissue biopsies. Thus, current aGVHD diagnosis is limited to patients with established disease manifestation. Therefore, for improved disease prevention it is important to develop predictive assays to identify patients at risk of developing aGVHD. Here we address whether insights into the timing of the aGVHD initiation and effector phases could allow for the detection of migrating alloreactive T cells before clinical aGVHD onset to permit for efficient therapeutic intervention. Methods Murine major histocompatibility complex (MHC) mismatched and minor histocompatibility antigen (miHAg) mismatched allo-HCT models were employed to assess the spatiotemporal distribution of donor T cells with flow cytometry and in vivo bioluminescence imaging (BLI). Daily flow cytometry analysis of peripheral blood mononuclear cells allowed us to identify migrating alloreactive T cells based on homing receptor expression profiles. Results We identified a time period of 2 weeks of massive alloreactive donor T cell migration in the blood after miHAg mismatch allo-HCT before clinical aGVHD symptoms appeared. Alloreactive T cells upregulated α4β7 integrin and P-selectin ligand during this migration phase. Consequently, targeted preemptive treatment with rapamycin, starting at the earliest detection time of alloreactive donor T cells in the peripheral blood, prevented lethal aGVHD. Conclusions Based on this data we propose a critical time frame prior to the onset of aGVHD symptoms to identify alloreactive T cells in the peripheral blood for timely and effective therapeutic intervention.}, language = {en} } @article{SeibelVolmer2021, author = {Seibel, Sebastian and Volmer, Judith}, title = {A Diary Study on Anticipated Leisure Time, Morning Recovery, and Employees' Work Engagement}, series = {International Journal of Environmental Research and Public Health}, volume = {18}, journal = {International Journal of Environmental Research and Public Health}, number = {18}, issn = {1660-4601}, doi = {10.3390/ijerph18189436}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-246090}, year = {2021}, abstract = {Recovery during yesterday's leisure time is beneficial for morning recovery, and morning recovery fosters employees' work engagement, a positive, motivational state associated with job performance. We extended existing research by assuming that both, morning recovery (considered a resource) and anticipated leisure time (considered an anticipated resource gain), relate to work engagement. Anticipated leisure time comprises two constructs: general anticipation of leisure time, which refers to employees' cognitive evaluation of their entire upcoming leisure time, and pleasant anticipation of a planned leisure activity, which describes a positive affective reaction because of one specific, upcoming leisure activity. We suggested that employees with high pleasant anticipation generate more thoughts of a planned leisure activity (ToPLA), which may distract them from their work, reducing their work engagement. A diary study over five days showed that morning recovery and general anticipation of leisure time were positively related to work engagement. Furthermore, employees with higher pleasant anticipation of a planned leisure activity reported more ToPLA. In contrast to our expectations, neither pleasant anticipation nor ToPLA was related to work engagement. In sum, this study introduced anticipated leisure time as a novel antecedent of work engagement and demonstrated that anticipated resource gains are important for high work engagement.}, language = {en} } @article{MuellerChandraFuraijatetal.2020, author = {M{\"u}ller, Frank and Chandra, Shivani and Furaijat, Ghefar and Kruse, Stefan and Waligorski, Alexandra and Simmenroth, Anne and Kleinert, Evelyn}, title = {A digital communication assistance tool (DCAT) to obtain medical history from foreign-language patients: development and pilot testing in a primary health care center for refugees}, series = {International Journal of Environmental Research and Public Health}, volume = {17}, journal = {International Journal of Environmental Research and Public Health}, number = {4}, issn = {1660-4601}, doi = {10.3390/ijerph17041368}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200640}, year = {2020}, abstract = {Background: Language barriers play a critical role in the treatment of migrant and refugee patients. In Germany, primary care interpreters are often not available especially in rural areas or if patients demand spontaneous or urgent consultations. Methods: In order to enable patients and their physicians to communicate effectively about the current illness history, we developed a digital communication assistance tool (DCAT) for 19 different languages and dialects. This paper reports the multidisciplinary process of the conceptual design and the iterative development of this cross-cultural user-centered application in an action-oriented approach. Results: We piloted our app with 36 refugee patients prior to a clinical study and used the results for further development. The acceptance and usability of the app by patients was high. Conclusion: Using digital tools for overcoming language barriers can be a feasible approach when providing health care to foreign-language patients.}, language = {en} } @article{BayerPruckner2023, author = {Bayer, Daniel and Pruckner, Marco}, title = {A digital twin of a local energy system based on real smart meter data}, series = {Energy Informatics}, volume = {6}, journal = {Energy Informatics}, doi = {10.1186/s42162-023-00263-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-357456}, year = {2023}, abstract = {The steadily increasing usage of smart meters generates a valuable amount of high-resolution data about the individual energy consumption and production of local energy systems. Private households install more and more photovoltaic systems, battery storage and big consumers like heat pumps. Thus, our vision is to augment these collected smart meter time series of a complete system (e.g., a city, town or complex institutions like airports) with simulatively added previously named components. We, therefore, propose a novel digital twin of such an energy system based solely on a complete set of smart meter data including additional building data. Based on the additional geospatial data, the twin is intended to represent the addition of the abovementioned components as realistically as possible. Outputs of the twin can be used as a decision support for either system operators where to strengthen the system or for individual households where and how to install photovoltaic systems and batteries. Meanwhile, the first local energy system operators had such smart meter data of almost all residential consumers for several years. We acquire those of an exemplary operator and discuss a case study presenting some features of our digital twin and highlighting the value of the combination of smart meter and geospatial data.}, language = {en} }