@article{WuBeckerWaagetal.1991, author = {Wu, Y.S. and Becker, Charles R. and Waag, A. and Kraus, M. M. and Bicknell-Tassius, R. N. and Landwehr, G.}, title = {Correlation of the Cd-to-Te ratio on CdTe surfaces with the surface structure}, isbn = {0163-1829}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37789}, year = {1991}, abstract = {We report here that reconstruction on (100), (1lIlA, and (1l1lB CdTe surfaces is either C(2X2), (2X2), and (l X I) or (2X I), (l X I), and (l X I) when they are Cd or Te stabilized, respectively. There is a mixed region between Cd and Te stabilization in which the reflected high-energy electron-diffraction (RHEED) patterns contain characteristics of both Cd- and Te-stabilized surfaces. We have also found that the Cd-to-Te ratio of the x-ray photoelectron intensities of their 3d\(_{3/ 2}\) core levels is about 20\% larger for a Cd-stabilized (1lIlA, (1lIlB, or (100) CdTe surface than for a Te-stabilized one. According to a simple model calculation, which was normalized by means of the photoelectron intensity ratio of a Cd-stabilized (lll)A and aTe-stabilized (1l1lB CdTe surface, the experimental data for CdTe surfaces can be explained by a linear dependence of the photoelectron-intensity ratio on the fraction of Cd in the uppermost monatomic layer. This surface composition can be correlated with the surface structure, i.e., the corresponding RHEED patterns. This correlation can in turn be employed to determine Te and Cd evaporation rates. The Te reevaporation rate is increasingly slower for the Te-stabilized (Ill) A, (l1l)B, and (100) surfaces, while the opposite is true for Cd from Cd-stabilized (Ill) A and (Ill)B surfaces. In addition, Te is much more easily evaporated from all the investigated surfaces than is Cd, if the substrate is kept at normal molecular-beam-epitaxy growth temperatures ranging from 2oo·C to 300 ·C.}, subject = {Festk{\"o}rperphysik}, language = {en} } @phdthesis{Wiessner2013, author = {Wießner, Michael}, title = {Isolierte Molek{\"u}le und delokalisierte Zust{\"a}nde: Einblick in die elektronische Struktur organischer Adsorbate mittels winkelaufgel{\"o}ster Photoemission}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-95265}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2013}, abstract = {Die vorliegende Arbeit demonstriert an Hand von verschiedenen Modellsystemen wie detailliert sich die grundlegenden Eigenschaften molekularer Adsorbate mit der winkelaufgel{\"o}sten Photoemission erkunden lassen. Die von Peter Puschnig et al. vorgestellte Verkn{\"u}pfung zwischen Photoemissionsintensit{\"a}t und den Molek{\"u}lorbitalen im Grundzustand mittels einer Fouriertransformation war dabei entscheidend, um die verschiedenen physikalischen Effekte einordnen und verstehen zu k{\"o}nnen. W{\"a}hrend f{\"u}r Coronen oder HBC die Orbitale im Grundzustand sehr gut zum Experiment passen, lassen sich f{\"u}r PTCDA und NTCDA einige Abweichungen von der DFT-Rechnung auf Basis der (semi-)lokalen GGA- oder LDA-Funktionale erkennen, die sich bei Messungen mit s-Polarisation hervorheben lassen. Diese k{\"o}nnen auf den Einfluss des Endzustandes in der Photoemission zur{\"u}ckgef{\"u}hrt werden. Im Rahmen der Dysonorbitale lassen sich die daf{\"u}r verantwortlichen Relaxationseffekte zwischen dem N-Elektronensystem des Molek{\"u}ls im Grundzustand und dem (N-1)-Elektronensystem des zur{\"u}ckbleibenden Kations explizit beschreiben. Die Berechnung des Photoemissionssignals mittels Fouriertransformation des Grundzustandes kann dar{\"u}ber hinaus weitere physikalische Effekte nicht korrekt ber{\"u}cksichtigen. Erste Anzeichen hierf{\"u}r konnten am PTCDA-HOMO bei einer Photonenenergie von 27 eV und s-Polarisation detektiert werden. Dar{\"u}ber hinaus kann die N{\"a}herung des Photoelektronenendzustands als ebene Welle den beobachteten zirkularen Dichroismus am HOMO und LUMO von PTCDA nicht erkl{\"a}ren. Erst in der Erweiterung durch eine Partialwellenzerlegung des Photoelektronenendzustands tritt ein dichroisches Signal in der theoretischen Beschreibung auf. F{\"u}r das delokalisierte pi-Elektronensystem von PTCDA ist aber selbst diese Verfeinerung noch nicht ausreichend, um das Experiment korrekt beschreiben und weitere Eigenschaften vorhersagen zu k{\"o}nnen. Qualitativ lassen sich die Ver{\"a}nderungen im CDAD bei der Transformation um 90° f{\"u}r HOMO und LUMO mit einem gruppentheoretischen Ansatz verstehen. Damit ist es m{\"o}glich, den molekularen Zust{\"a}nden ihre irreduzible Darstellung zuzuweisen, wor{\"u}ber sich f{\"u}r PTCDA die Verteilung der quantenmechanischen Phase rekonstruieren l{\"a}sst. Dies ist deshalb {\"a}ußerst bemerkenswert, da {\"u}blicherweise in physikalischen Experimenten nur die Intensit{\"a}t und keine Informationen {\"u}ber die Phase messbar sind. Damit k{\"o}nnen die Photoemissionsmessungen im k||-Raum vollst{\"a}ndig in den Realraum transformiert werden, wodurch die laterale Ortsinformation {\"u}ber die h{\"o}chsten besetzen Molek{\"u}lorbitale von PTCDA zug{\"a}nglich wird. Neben der Bestimmung der molekularen Orbitale, deren Struktur von der Anordnung der Atome im Molek{\"u}l dominiert wird, enth{\"a}lt die winkelaufgel{\"o}ste Photoemission Informationen {\"u}ber die Adsorbat-Substrat-Wechselwirkung. F{\"u}r hoch geordnete Monolagen ist es m{\"o}glich, die verschiedenen Verbreiterungsmechanismen zu trennen und zu analysieren. Bei den untersuchten Systemen sind die Verbreiterungen aufgrund von unterschiedlichen Adsorptionspl{\"a}tzen oder Probeninhomogenit{\"a}ten ebenso wie die experimentelle Aufl{\"o}sung der 2D-Analysatoren vernachl{\"a}ssigbar gegen{\"u}ber Lebensdauereffekten und evtl. Verbreiterung aufgrund von Dispersionseffekten. Bereits bei den {\"a}ußerst schwach wechselwirkenden Systemen Coronen auf Ag(111) und Au(111) unterscheiden sich die beiden Systeme in ihrer Lorentzverbreiterung beim HOMO. In erster N{\"a}herung l{\"a}sst sich dies auf eine Lebensdauer des entstandenen Photolochs zur{\"u}ckf{\"u}hren, welches je nach St{\"a}rke der Substratkopplung unterschiedlich schnell mit Substratelektronen aufgef{\"u}llt werden kann. Die Lorentzbreite als Indikator f{\"u}r die Wechselwirkung bzw. Hybridisierungsst{\"a}rke zeigt f{\"u}r die Systeme mit Ladungstransfer vom Substrat in das Molek{\"u}l eine sehr viel gr{\"o}ßere Verbreiterung. Zum Beispiel betr{\"a}gt die Lorentzbreite des LUMO f{\"u}r NTCDA/Ag(110) FWHM=427 meV, und somit eine mehr als f{\"u}nfmal so große Verbreiterung als f{\"u}r das HOMO von Coronen/Au(111). Diese starke Verbreiterung geht im Fall von NTCDA/Ag(110) wie auch bei den untersuchten Systemen NTCDA/Cu(100) und PTCDA/Ag(110) einher mit einem Ladungstransfer vom Substrat ins Molek{\"u}l, sowie mit der Ausbildung eines zus{\"a}tzlichen charakteristischen Signals in der Winkelverteilung des LUMO, dem Hybridisierungszustand bei kx,y=0{\AA}-1. Die Intensit{\"a}t dieses Zustands korreliert bei den Systemen NTCDA auf Cu(100) bzw. auf Ag(110) jeweils mit der Lorentzbreite des LUMO-Zustands. Die Hybridisierung zwischen Molek{\"u}l und Substrat hat noch weitere Auswirkungen auf die beobachtbaren physikalischen Eigenschaften. So f{\"u}hrt die starke Hybridisierung mit dem Substrat wiederum dazu, dass sich die intermolekulare Dispersion f{\"u}r die Elektronen im LUMO-Zustand deutlich verst{\"a}rkt. Der direkte {\"U}berlapp der Wellenfunktionen ist im System PTCDA/Ag(110) laut DFT-Rechnungen relativ klein und f{\"u}hrt lediglich zu einer Bandbreite von 60 meV. Durch die Hybridisierung mit den delokalisierten Substratb{\"a}ndern erh{\"o}ht sich der Grad der Delokalisierung im LUMO-Zustand, d.h. die Bandbreite steigt auf 230 meV, wie das Experiment best{\"a}tigt. Im Gegensatz zu fr{\"u}heren STM/STS-basierten Messungen [Temirov2006] kann mit der Kombination aus DFT-Rechnung und ARPES-Experiment eindeutig nachgewiesen werden, dass das Substrat im Fall von PTCDA/Ag(110) die Bandbreite verst{\"a}rken kann, sodass sich die effektive Masse der Lochladungstr{\"a}ger von meff=3,9me auf meff=1,1me reduziert. Im Blick auf die eingangs gestellte Frage, ob sich molekulare Adsorbate eher wie isolierte Molek{\"u}le oder als periodische Festk{\"o}rper beschreiben lassen, kommt diese Arbeit auf ein differenziertes Ergebnis. In den Impulsverteilungen, die sich aus der Form der molekularen Wellenfunktionen ableiten lassen, spiegelt sich eindeutig der isolierte molekulare Charakter wieder. Dagegen zeigt sich in der Energiedispersion E(k||) ein delokalisierter, blochartiger Charakter, und es konnte demonstriert werden, dass es zu einem Vermischen von Metall- und Molek{\"u}lwellenfunktionen kommt. Molekulare Adsorbate sind also beides, isolierte Molek{\"u}le und zweidimensionale Kristalle mit delokalisierten Zust{\"a}nden.}, subject = {Organisches Molek{\"u}l}, language = {de} } @phdthesis{Weigold2015, author = {Weigold, Lena}, title = {Ermittlung des Zusammenhangs zwischen mechanischer Steifigkeit und W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st bei hochpor{\"o}sen Materialien}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-124806}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Ziel dieser Arbeit ist es, ein verbessertes Verst{\"a}ndnis f{\"u}r den Zusammenhang zwischen mechanischer Steifigkeit und W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st bei hochpor{\"o}sen Materialien zu erlangen. Im Fokus dieser Arbeit steht die Fragestellung, wie mechanische Steifigkeit und W{\"a}rmeleitf{\"a}higkeit bei hochpor{\"o}sen Materialien miteinander zusammenh{\"a}ngen und ob es m{\"o}glich ist, diese beiden Eigenschaften durch geometrische Modifikationen der Mikrostruktur unabh{\"a}ngig voneinander zu ver{\"a}ndern. Die durchgef{\"u}hrten Untersuchungen haben gezeigt, dass ein Großteil der mikrostrukturellen Modifikationen beide Materialeigenschaften beeinflussen und die mechanische Steifigkeit in der Regel eng mit dem W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st verkn{\"u}pft ist. Es konnte jedoch auch nachgewiesen werden, dass die mechanische Steifigkeit bei hochpor{\"o}sen Materialien nicht eindeutig mit dem W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st zusammenh{\"a}ngt und spezifische mikrostrukturelle Modifikationen einen st{\"a}rkeren Einfluss auf die mechanische Steifigkeit besitzen, als auf den W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st. Umgekehrt ist diese Aussage nicht ganz so eindeutig. Die theoretische Betrachtung des Zusammenhangs zeigt, dass in die Berechnung der mechanischen Steifigkeit teils andere geometrische Strukturgr{\"o}ßen einfließen, als in die Berechnung des W{\"a}rmetransports {\"u}ber das Festk{\"o}rperger{\"u}st, so dass die mechanische Steifigkeit unabh{\"a}ngig von der W{\"a}rmeleitf{\"a}higkeit ver{\"a}ndert werden kann. Es zeigt sich jedoch auch, dass die meisten strukturellen Ver{\"a}nderungen beide Eigenschaften beeinflussen und die mechanische Steifigkeit aufgrund der Biegedeformation der Netzwerkelemente systematisch st{\"a}rker auf strukturelle Ver{\"a}nderungen reagiert als die W{\"a}rmeleitf{\"a}higkeit der Struktur, so dass die mechanische Steifigkeit in der Regel quadratisch mit der W{\"a}rmeleitf{\"a}higkeit des Festk{\"o}rperger{\"u}stes skaliert. Mit den Methoden der effective-media-theory lassen sich Grenzen ermitteln, innerhalb derer sich mechanische Steifigkeit und W{\"a}rmeleitf{\"a}higkeit unabh{\"a}ngig voneinander variieren lassen. Im experimentellen Teil der Arbeit wurden Probenserien von Polyurethan-Sch{\"a}umen, Polyurea Aerogelen und organisch / anorganischen Hybrid Aerogelen herangezogen, so dass por{\"o}se Materialien mit geordneten, voll vernetzten Mikrostrukturen, mit statistisch isotropen, teilvernetzen Mikrostrukturen, sowie Mikrostrukturen mit anisotropen Charakter in die Untersuchung einbezogen werden konnten. Als Struktureigenschaften, die die mechanische Steifigkeit ungew{\"o}hnlich stark beeinflussen, konnten die Regelm{\"a}ßigkeit der Struktur und der Kr{\"u}mmungsradius der Netzwerkelemente sicher identifiziert werden. Alle weiteren strukturellen Ver{\"a}nderungen f{\"u}hren zu dem ann{\"a}hernd quadratischen Zusammenhang. In einem dritten Abschnitt dieser Arbeit wird das vereinfachte Phononendiffusionsmodell herangezogen, um den Zusammenhang zwischen mechanischer Steifigkeit und W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st bei Aerogelen grundlagenphysikalisch zu modellieren. Zur Diskussion werden die experimentell ermittelten Eigenschaften der isotropen Polyurea Aerogele herangezogen und eine qualitative Modellierung ihrer Schwingungszustandsdichten durchgef{\"u}hrt. Es konnte gezeigt werden, dass die Kombination aus Probendichte und Schallgeschwindigkeit, mit der sich die mechanische Steifigkeit berechnen l{\"a}sst, unter bestimmten Randbedingungen auch die Energie und Transporteigenschaften der Phononen beschreibt, die den W{\"a}rmetransport {\"u}ber das Festk{\"o}rperger{\"u}st bei Aerogelen bestimmen. Die Ergebnisse dieser Arbeit lassen sich zum Beispiel heranziehen, um die Eigenschaften hochpor{\"o}ser Materialien f{\"u}r eine gegebene Anwendung durch mikrostrukturelle Modifikationen optimal zu gestalten.}, subject = {Por{\"o}ser Stoff}, language = {de} } @phdthesis{Thienel2015, author = {Thienel, Cornelius}, title = {Exploring the transport properties of the three-dimensional topological insulator material HgTe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-122031}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {In der vorliegenden Dissertation werden die Transporteigenschaften von verspannten HgTe-Volumenkristallen untersucht. Verspanntes HgTe stellt einen dreidimensionalen topologischen Isolator dar und ist zur Erkundung von topologischen Oberfl{\"a}chenzust{\"a}nden von speziellem Interesse, da es mit Hilfe von Molekularstrahlepitaxie in hoher Kristallqualit{\"a}t gewachsen werden kann. Die niedrige Defektdichte f{\"u}hrt zu beachtlichen Ladungstr{\"a}gerbeweglichkeiten, die deutlich {\"u}ber denen anderer topologischer Isolatoren liegen. Verspanntes HgTe hat jedoch eine kleine Energiel{\"u}cke von ca. 20 meV. Deshalb ist es f{\"u}r eine m{\"o}gliche Verwendung des Materials ein wichtiger Aspekt, in welchem Parameterbereich Oberfl{\"a}chentransport stattfindet. Um dieser Frage nachzugehen, werden die HgTe-Proben bei tiefen Temperaturen (T < 100 mK) und unter dem Einfluss hoher Magnetfelder in verschiedenen Orientierungen untersucht. Der Einfluss von Gate-Elektroden ober- und unterhalb der Struktur sowie von Deckschichten, die die Oberfl{\"a}chen sch{\"u}tzen, wird diskutiert. Basierend auf einer Analyse des Quanten-Hall-Effekts wird gezeigt, dass der Transport in diesem Material von topologischen Oberfl{\"a}chenzust{\"a}nden dominiert ist. Die Abh{\"a}ngigkeit der topologischen Oberfl{\"a}chenzust{\"a}nde von der Gate-Spannung wird dargestellt. Durch diese Abh{\"a}ngigkeit ist es zum ersten Mal m{\"o}glich, eine ungerade ganzzahlige Quanten-Hall-Plateau Sequenz nachzuweisen, die von den Oberfl{\"a}chen senkrecht zum Magnetfeld stammt. Des Weiteren wird im Rahmen dieser Arbeit in Proben hoher Oberfl{\"a}chenqualit{\"a}t zum ersten Mal f{\"u}r einen 3D TI der p-Typ QHE der Oberfl{\"a}chenzust{\"a}nde beobachtet. Aus der Gate-Abh{\"a}ngigkeit der Messungen wird geschlossen, dass das Abschirmverhalten in 3D TIs nicht trivial ist. Die Transportdaten werden mit Hilfe von intuitiven theoretischen Modellen auf qualitative Weise analysiert.}, subject = {Topologischer Isolator}, language = {en} } @phdthesis{Schuetz2020, author = {Sch{\"u}tz, Philipp}, title = {Dimensionality-Driven Metal-Insulator Transition in Spin-Orbit-Coupled SrIrO\(_3\)}, doi = {10.25972/OPUS-21278}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-212781}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {In the past decades correlated-electron physics due to strong Coulomb interactions and topological physics caused by band inversion often induced by strong spin-orbit coupling have been the workhorses of solid state research. While commonly considered as disparate phenomena, it was realized in the early 2010s that the interplay between the comparably strong Coulomb and spin-orbit interactions in the \$5d\$ transition metal oxides may result in hitherto unforeseen properties. The layered perovskite Sr\$\textsubscript{2}\$IrO\$\textsubscript{4}\$ has attracted special attention due to the observation of an unconventional Mott-insulating phase and predictions of exotic superconductivity. Less is known about its three-dimensional counterpart SrIrO\$\textsubscript{3}\$, since rather than the cubic perovskite structure it adopts the thermodynamically stable hexagonal polymorph thereof. This thesis therefore sets out to establish the synthesis of epitaxially stabilized perovskite SrIrO\$\textsubscript{3}\$ by pulsed laser deposition and to investigate its electronic and magnetic structure by state-of-the-art x-ray spectroscopy techniques. In this endeavor the appropriate thermodynamic conditions for the growth of high-quality SrIrO\$\textsubscript{3}\$ are identified with a focus on the prevention of cation off-stoichiometry and the sustainment of layer-by-layer growth. In the thus-optimized films the cubic perovskite symmetry is broken by a tetragonal distortion due to epitaxial strain and additional cooperative rotations of the IrO\$\textsubscript{6}\$ octahedra. As a consequence of the thermodynamic instability of the IrO\$\textsubscript{2}\$ surface layer, the films unexpectedly undergo a conversion to a SrO termination during growth. In an attempt to disentangle the interplay between spin-orbit and Coulomb interaction the three-dimensional electronic structure of perovskite SrIrO\$\textsubscript{3}\$ is investigated in a combined experimental and theoretical approach using soft x-ray angle-resolved photoelectron spectroscopy and \textit{ab initio} density functional theory calculations. The experimentally found metallic ground state hosts coherent quasiparticle peaks with a well-defined Fermi surface and is theoretically described by a single half-filled band with effective total angular momentum \$J_\text{eff} = 1/2\$ only upon incorporation of a sizeable local Coulomb repulsion and -- to a lesser extent -- the broken cubic crystal symmetry in the film. Upon reduction of the SrIrO\$\textsubscript{3}\$ thickness below a threshold of four unit cells the scales are tipped in favor of a Mott-insulating phase as the on-site Coulomb repulsion surmounts the diminishing kinetic energy upon transition into the two-dimensional regime. Concomitantly, a structural transition occurs because the corner-shared octahedral network between substrate and film imposes constraints upon the IrO\$\textsubscript{6}\$ octahedral rotations in the thin-film limit. The striking similarity between the quasi-two-dimensional spin-orbit-induced Mott insulator Sr\$\textsubscript{2}\$IrO\$\textsubscript{4}\$ and SrO-terminated SrIrO\$\textsubscript{3}\$ in the monolayer limit underlines the importance of dimensionality for the metal-insulator transition and possibly opens a new avenue towards the realization of exotic superconductivity in iridate compounds. Whether the analogy between SrIrO\$\textsubscript{3}\$ in the two-dimensional limit and its Ruddlesden-Popper bulk counterparts extends to their complex magnetic properties ultimately remains an open question, although no indications for a remanent (anti)ferromagnetic order were found. The unprecedented observation of an x-ray magnetic circular dichroism at the O~\$K\$-absorption edge of iridium oxides in an external magnetic field promises deeper insights into the intricate connection between the \$J_\text{eff} = 1/2\$ pseudospin state, its hybridization with the oxygen ligand states and the magnetic order found in the Ruddlesden-Popper iridates.}, subject = {Festk{\"o}rperphysik}, language = {en} } @phdthesis{Schelter2012, author = {Schelter, J{\"o}rg}, title = {The Aharonov-Bohm effect and resonant scattering in graphene}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74662}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {In this thesis, the electronic transport properties of mesoscopic condensed matter systems based on graphene are investigated by means of numerical as well as analytical methods. In particular, it is analyzed how the concepts of quantum interference and disorder, which are essential to mesoscopic devices in general, are affected by the unique electronic and transport properties of the graphene material system. We consider the famous Aharonov-Bohm effect in ring-shaped transport geometries, and, besides providing an overview over the recent developments on the subject, we study the signatures of fundamental phenomena such as Klein tunneling and specular Andreev reflection, which are specific to graphene, in the magnetoconductance oscillations. To this end, we introduce and utilize a variant of the well-known recursive Green's function technique, which is an efficient numerical method for the calculation of transport observables in effectively non-interacting open quantum systems in the framework of a tight binding model. This technique is also applied to study the effects of a specific kind of disorder, namely short-range resonant scatterers, such as strongly bound adatoms or molecules, that can be modeled as vacancies in the graphene lattice. This numerical analysis of the conductance in the presence of resonant scatterers in graphene leads to a non-trivial classification of impurity sites in the graphene lattice and is further substantiated by an independent analytical treatment in the framework of the Dirac equation. The present thesis further contains a formal introduction to the topic of non-equilibrium quantum transport as appropriate for the development of the numerical technique mentioned above, a general introduction to the physics of graphene with a focus on the particular phenomena investigated in this work, and a conclusion where the obtained results are summarized and open questions as well as potential future developments are highlighted.}, subject = {Graphen}, language = {en} } @phdthesis{Posske2015, author = {Posske, Thore Hagen}, title = {Dressed Topological Insulators: Rashba Impurity, Kondo Effect, Magnetic Impurities, Proximity-Induced Superconductivity, Hybrid Systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131249}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Topological insulators are electronic phases that insulate in the bulk and accommodate a peculiar, metallic edge liquid with a spin-dependent dispersion. They are regarded to be of considerable future use in spintronics and for quantum computation. Besides determining the intrinsic properties of this rather novel electronic phase, considering its combination with well-known physical systems can generate genuinely new physics. In this thesis, we report on such combinations including topological insulators. Specifically, we analyze an attached Rashba impurity, a Kondo dot in the two channel setup, magnetic impurities on the surface of a strong three-dimensional topological insulator, the proximity coupling of the latter system to a superconductor, and hybrid systems consisting of a topological insulator and a semimetal. Let us summarize our primary results. Firstly, we determine an analytical formula for the Kondo cloud and describe its possible detection in current correlations far away from the Kondo region. We thereby rely on and extend the method of refermionizable points. Furthermore, we find a class of gapless topological superconductors and semimetals, which accommodate edge states that behave similarly to the ones of globally gapped topological phases. Unexpectedly, we also find edge states that change their chirality when affected by sufficiently strong disorder. We regard the presented research helpful in future classifications and applications of systems containing topological insulators, of which we propose some examples.}, subject = {Topologischer Isolator}, language = {en} } @phdthesis{Muench2012, author = {M{\"u}nch, Steffen}, title = {Photolumineszenz-Spektroskopie an niederdimensionalen Halbleiterstrukturen auf III-V-Basis}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74104}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit optischen Untersuchungen an niederdimensionalen III/V-Halbleiterstrukturen. Dabei werden zun{\"a}chst im ersten Teil selbst-organisiert gewachsene Nanodr{\"a}hte aus InP und GaN bez{\"u}glich ihrer Oberfl{\"a}chen- und Kristallqualit{\"a}t charakterisiert. Dies ist besonders im Hinblick auf zuk{\"u}nftige opto- und nanoelektronische Bauteile von Interesse. Der zweite, grundlagenorientierte Teil der Arbeit ist im Bereich der Quantenoptik angesiedelt und widmet sich magneto-optischen Studien zur Licht-Materie Wechselwirkung in Quantenpunkt-Mikroresonator-Systemen im Regime der starken Kopplung. Oberfl{\"a}chen-Untersuchungen an Halbleiter-Nanodr{\"a}hten Bei diesem Teilaspekt der vorliegenden Arbeit stehen Untersuchungen von Halbleiter-Nanodr{\"a}hten mittels zeitintegrierter und zeitaufgel{\"o}ster Photolumineszenz (PL)-Spektroskopie im Vordergrund. Diese eindimensionalen Nanostrukturen bieten eine vielversprechende Perspektive f{\"u}r die weitere Miniaturisierung in der Mikroelektronik. Da konventionelle Strukturierungsverfahren wie die optische Lithographie zunehmend an physikalische und technologische Grenzen stoßen, sind selbstorganisierte Wachstumsprozesse hierbei von besonderem Interesse. Bei Nanodr{\"a}hten besteht dar{\"u}ber hinaus konkret noch die M{\"o}glichkeit, {\"u}ber ein gezieltes axiales und radiales Wachstum von Heterostrukturen bereits bei der Herstellung komplexere Funktionalit{\"a}ten einzubauen. Auf Grund ihres großen Oberfl{\"a}che-zu-Volumen Verh{\"a}ltnisses sind die elektronischen und optischen Eigenschaften der Nanodr{\"a}hte extrem oberfl{\"a}chensensitiv, was vor allem im Hinblick auf zuk{\"u}nftige Anwendungen im Bereich der Mikro- oder Optoelektronik sowie der Sensorik von essentieller Bedeutung ist. Zur n{\"a}heren Untersuchung der Oberfl{\"a}cheneigenschaften von Nanodr{\"a}hten eignet sich die optische Spektroskopie besonders, da sie als nicht-invasive Messmethode ohne aufw{\"a}ndige Probenpr{\"a}paration schnell n{\"u}tzliche Informationen liefert, die zum Beispiel in der Optimierung des Herstellungsprozesses eingesetzt werden k{\"o}nnen. Quantenoptik an Halbleiter-Mikrokavit{\"a}ten Der zweite Teil dieser Arbeit widmet sich der Licht-Materie-Wechselwirkung in Quantenpunkt-Mikroresonator-Systemen. Dabei ist das Regime der starken Kopplung zwischen Emitter und Resonator, auch im Hinblick auf m{\"o}gliche zuk{\"u}nftige Anwendungen in der Quanteninformationsverarbeitung, von besonderem Interesse. Diese Mikroresonator-T{\"u}rmchen, die auf planaren AlAs/GaAs-Mikroresonatoren mit InGaAs Quantenpunkten in der aktiven Schicht basieren, wurden mittels zeitintegrierter und zeitaufgel{\"o}ster Mikro-PL-Spektroskopie in einem {\"a}ußeren magnetischen Feld in Faraday-Konfiguration untersucht. Grundlegende Untersuchungen von Quantenpunkten im Magnetfeld Zun{\"a}chst wurden InxGa(1-x)As-Quantenpunkte mit unterschiedlichem In-Gehalt (x=30\%, 45\% und 60\%) magneto-optisch untersucht. Aufgrund der gr{\"o}ßeren Abmessungen weisen die Quantenpunkte mit 30\% In-Anteil auch hohe Oszillatorst{\"a}rken auf, was sie besonders f{\"u}r Experimente zur starken Kopplung auszeichnet. Unter dem Einfluss des Magnetfeldes zeigte sich ein direkter Zusammenhang zwischen der lateralen Ausdehnung der Quantenpunkte und ihrer diamagnetischen Verschiebung. Starke Kopplung im magnetischen Feld Neben der M{\"o}glichkeit, das Resonanzverhalten {\"u}ber das externe Magnetfeld zu kontrollieren, zeigte sich eine Korrelation zwischen der Kopplungsst{\"a}rke und dem magnetischen Feld, was auf eine Verringerung der Oszillatorst{\"a}rke im Magnetfeld zur{\"u}ckgef{\"u}hrt werden konnte. Diese steht wiederum im Zusammenhang mit einer Einschn{\"u}rung der Wellenfunktion des Exzitons durch das angelegte Feld. Dieser direkte Einfluss des Magnetfeldes auf die Oszillatorst{\"a}rke erlaubt eine in situ Variation der Kopplungsst{\"a}rke. Photon-Photon-Wechselwirkung bei der starken Kopplung im Magnetfeld Nach der Demonstration der starken Kopplung zwischen entarteten Exziton- und Resonatormoden im Magnetfeld, wurden im weiteren Verlauf Spin-bezogene Kopplungseffekte im Regime der starken Kopplung untersucht. Es ergaben sich im Magnetfeld unter Variation der Temperatur zwei Bereiche der Wechselwirkung zwischen den einzelnen Komponenten von Resonator- und Exzitonenmode. Von besonderem Interesse ist dabei eine beobachtete indirekte Wechselwirkung zwischen den beiden photonischen Moden im Moment der Resonanz, die durch die exzitonische Mode vermittelt wird. Diese sogenannte Spin-vermittelte Photon-Photon-Kopplung stellt ein Bindeglied zwischen eigentlich unabh{\"a}ngigen photonischen Moden {\"u}ber den Spinzustand eines Exzitons dar.}, subject = {Drei-F{\"u}nf-Halbleiter}, language = {de} } @phdthesis{Klein2009, author = {Klein, Markus}, title = {Starke Korrelationen in Festk{\"o}rpern : von lokalisierten zu itineranten Elektronen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-36459}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {In dieser Arbeit wurden mittels winkelaufgel{\"o}ster Photoemission verschiedene Verbindungen mit stark korrelierten Elektronen untersucht. Es wurde gezeigt, dass diese Technik einen direkten Zugang zu den niederenergetischen Wechselwirkungen bietet und dadurch wichtige Informationen {\"u}ber die Vielteilchenphysik dieser Systeme liefert. Die direkte Beobachtung der scharfen Quasiteilchenstrukturen in der N{\"a}he der Fermikante erm{\"o}glichte insbesondere die genaue Betrachtung der folgenden Punkte: 1. Quantenphasen{\"u}bergang: analog zu [27] wurde gezeigt, dass die hochaufgel{\"o}ste PES Zugriff auf die lokale Energieskala TK bietet. Außerdem konnte im Rahmen eines st{\"o}rungstheoretischen Modells allgemein gezeigt werden, wie sich kleine RKKY-St{\"o}rungen auf TK auswirken. Aus der experimentellen Entwicklung von TK(x) in CeCu6-xAux lassen sich mit Hilfe dieses Modells R{\"u}ckschl{\"u}sse auf den Quantenphasen{\"u}bergang bei T = 0 ziehen. 2. Kondogitter: mit Hilfe einer geordneten CePt5/Pt(111)-Oberfl{\"a}chenlegierung wurde demonstriert, dass mit ARPES Kondogittereffekte beobachtet werden k{\"o}nnen. Dazu z{\"a}hlen die Beobachtung von Hybridisierungsbandl{\"u}cken und der starken Renormierung der Bandmassen in der N{\"a}he von EF. Diese Effekte lassen sich, mit Hilfe unterschiedlicher Anregungsenergien und Messungen an einer isostrukturellen LaPt5-Schicht, eindeutig dem Resultat einer d f -Mischung der elektronischen Zust{\"a}nde zuweisen. Anhand von temperaturabh{\"a}ngigenMessungen konnte erstmals der {\"U}bergang von lokalisierten zu koh{\"a}renten Quasiteilchen in einem Kondosystem mittels ARPES beobachtet werden. 3. Phasen{\"u}berg{\"a}nge: bei FeSi und URu2Si2 wurde jeweils gezeigt, dass die ARPES sensitiv f{\"u}r kleinste {\"A}nderungen der elektronischen Struktur in unmittelbarer Umgebung der Fermienergie ist. Es konnten charakteristische Energien und Temperaturen, sowie am Phasen{\"u}bergang beteiligte B{\"a}nder und deren effektive Massen m* quantifiziert werden. Insbesondere wurde gezeigt, dass Heavy-Fermion-B{\"a}nder mit m* = 40 me eine wichtige Rolle beim Hidden-order-Phasen{\"u}bergang in URu2Si2 spielen. 4. Oberfl{\"a}cheneffekte: f{\"u}r alle Proben, außer CeCu6-xAux, musste festgestellt werden, dass Oberfl{\"a}chenzust{\"a}nde betr{\"a}chtliche Anteile am Spektrum besitzen k{\"o}nnen. Daher ist bei jedem Material gr{\"o}ßte Vorsicht bei der Pr{\"a}paration der Oberfl{\"a}che und der Interpretation der Spektren angebracht. Als eine geeignete Methode um Oberfl{\"a}chen und Volumenanteile auseinander zu halten, stellten sich anregungsenergieabh{\"a}ngige Messungen heraus. 5. theoretische Modelle: trotz der Bezeichnung "stark korrelierte Systeme", unterscheiden sich die untersuchten Verbindungen bez{\"u}glich ihrer theoretischen Beschreibung: die Physik der Cersysteme (CeCu6, CePt5/Pt(111)) ist bei T > TK durch lokale St{\"o}rstellen bestimmt und lassen sich somit im Rahmen des SIAM beschreiben. Bei tieferen Temperaturen T < TK treten jedoch Anzeichen von beginnender Koh{\"a}renz auf und geben somit den {\"U}bergang zum PAM wieder. Schwere, dispergierenden B{\"a}nder in URu2Si2 und FeSi zeigen, dass beide Systeme nur mit Hilfe eines geordneten Gitters beschreibbar sind. Insbesondere stellt sich f{\"u}r FeSi heraus, dass eine Erkl{\"a}rung im Kondoisolator-Bild falsch ist und ein Hubbard-Modell-Ansatz angebrachter scheint.}, subject = {Kondo-Effekt}, language = {de} } @phdthesis{Huewe2017, author = {H{\"u}we, Florian}, title = {Electrothermal Investigation on Charge and Heat Transport in the Low-Dimensional Organic Conductor (DCNQI)\(_2\)Cu}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-153492}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {This thesis aimed at the coherent investigation of the electrical and thermal transport properties of the low-dimensional organic conductor (DCNQI)2M (DCNQI: dicyanoquinonediimine; M: metallic counterion). These radical anion salts present a promising, new material class for thermoelectric applications and hence, a consistent characterization of the key parameters is required to evaluate and to optimize their performance. For this purpose, a novel experimental measurement setup enabling the determination of the electrical conductivity, the Seebeck coefficient and the thermal conductivity on a single crystalline specimen has been designed and implemented in this work. The novel measurement setup brought to operation within this thesis enabled a thorough investigation of the thermal transport properties in the (DCNQI)2M system. The thermal conductivity of (DCNQI-h8)2Cu at RT was determined to κ=1.73 W m^(-1) K^(-1). By reducing of the copper content in isostructural, crystalline (DMe-DCNQI)2CuxLi1-x alloys, the electrical conductivity has been lowered by one order of magnitude and the correlated changes in the thermal conductivity allowed for a verification of the Wiedemann-Franz (WF) law at RT. A room temperature Lorenz number of L=(2.48±0.45)⋅〖10〗^(-8) WΩK^(-2) was obtained in agreement with the standard Lorenz number L_0=2,44⋅〖10〗^(-8) WΩK^(-2) for 3D bulk metals. This value appears to be significantly reduced upon cooling below RT, even far above the Debye temperature of θ_D≈82 K, below which a breakdown of the WF law is caused by different relaxation times in response to thermal and to electric field perturbations. The experimental data enabled the first consistent evaluation of the thermoelectric performance of (DCNQI)\$_2\$Cu. The RT power factor of 110 μWm^(-1) K^(-2) is comparable to values obtained on PEDOT-based thermoelectric polymers. The RT figure of merit amounts to zT=0.02 which falls short by a factor of ten compared to the best values of zT=0.42 claimed for conducting polymers. It originates from the larger thermal conductivity in the organic crystals of about 1.73 W m^(-1) K^(-1) in (DCNQI)2Cu. Yet, more elaborate studies on the anisotropy of the thermal conductivity in PEDOT polymers assume their figure of merit to be zT=0.15 at most, recently. Therefore, (DCNQI)2Cu can be regarded as thermoelectric material of similar performance to polymer-based ones. Moreover, it represents one of the best organic n-type thermoelectric materials to date and as such, may also become important in hybrid thermoelectrics in combination with conducting polymers. Upon cooling below room temperature, (DCNQI)2Cu reveals its full potential attaining power factors of 50 mW K^(-2) m^(-1) and exceeding values of zT>0.15 below 40 K. These values represent the best thermoelectric performance in this low-temperature regime for organic as well as inorganic compounds and thus, low-dimensional organic conductors might pave the way toward new applications in cryogenic thermoelectrics. Further improvements may be expected from optimizing the charge carrier concentration by taking control over the CT process via the counterion stack of the crystal lattice. The concept has also been demonstrated in this work. Moreover, the thermoelectric performance in the vicinity of the CDW transition in (MeBr-DCNQI)2Cu was found to be increased by a factor of 5. Accordingly, the diversity of electronic ground states accessible in organic conductors provides scope for further improvements. Finally, the prototype of an all-organic thermoelectric generator has been built in combination with the p-type organic metal TTT2I3. While it only converts about 0.02\% of the provided heat into electrical energy, the specific power output per active area attains values of up to 5 mW cm^(-2). This power output, defining the cost-limiting factor in the recovery of waste heat, is three orders of magnitude larger than in conducting polymer devices and as such, unrivaled in organic thermoelectrics. While the thermoelectric key parameters of (DCNQI)2Cu still lack behind conventional thermoelectrics made of e.g. Bi2Te3, the promising performance together with its potential for improvements make this novel material class an interesting candidate for further exploration. Particularly, the low-cost and energy-efficient synthesis routes of organic materials highlight their relevance for technological applications.}, subject = {Radikalanionensalz}, language = {en} } @phdthesis{Hartmann2008, author = {Hartmann, David}, title = {Elektrisches und magnetisches Schalten im nichtlinearen mesoskopischen Transport}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-29175}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {Im Rahmen dieser Arbeit wurden Transporteigenschaften von Nanostrukturen basierend auf modulationsdotierten GaAs/AlGaAs Hetero{\"u}berg{\"a}ngen untersucht. Derartige Heterostrukturen zeichnen sich durch ein hochbewegliches zweidimensionales Elektronengas (2DEG) aus, das sich wenige 10 nm unterhalb der Probenoberfl{\"a}che ausbildet. Mittels Elektronenstrahl-Lithographie und nasschemischer {\"A}tztechnik wurde dieses Ausgangsmaterial strukturiert. Eindimensionale Leiter mit Kanalweiten von wenigen 10 nm wurden auf diese Weise hergestellt. Die Vorz{\"u}ge derartiger Strukturen zeigen sich im ballistischen Elektronentransport {\"u}ber mehrere 10 µm und einer hohen Elektronenbeweglichkeit im Bereich von 10^6cm^2/Vs. Als nanoelektronische Basiselemente wurden eingehend eindimensionale Quantendr{\"a}hte sowie y-f{\"o}rmig verzweigte Strukturen untersucht, deren Kanalleitwert {\"u}ber seitliche Gates kontrolliert werden kann. Dabei wurden die Transportmessungen {\"u}berwiegend im stark nichtlinearen Transportregime bei Temperaturen zwischen 4,2 K und Raumtemperatur durchgef{\"u}hrt. Der Fokus dieser Arbeit lag insbesondere in der Untersuchung von Verst{\"a}rkungseigenschaften und kapazitiven Kopplungen zwischen Nanodr{\"a}hten, der Realisierung von komplexen Logikfunktionen wie Z{\"a}hler- und Volladdiererstrukturen, dem Einsatz von Quantengates sowie der Analyse von rauschaktiviertem Schalten, stochastischen Resonanzph{\"a}nomenen und Magnetfeldasymmetrien des nichtlinearen mesoskopischen Leitwertes.}, subject = {Niederdimensionales Elektronengas}, language = {de} } @phdthesis{Goth2015, author = {Goth, Florian}, title = {Continuous time quantum Monte Carlo Studies of Quenches and Correlated Systems with Broken Inversion Symmetry}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-118836}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {This thesis deals with quantum Monte Carlo simulations of correlated low dimensional electron systems. The correlation that we have in mind is always given by the Hubbard type electron electron interaction in various settings. To facilitate this task, we develop the necessary methods in the first part. We develop the continuous time interaction expansion quantum algorithm in a manner suitable for the treatment of effective and non-equilibrium problems. In the second part of this thesis we consider various applications of the algorithms. First we examine a correlated one-dimensional chain of electrons that is subject to some form of quench dynamics where we suddenly switch off the Hubbard interaction. We find the light-cone-like Lieb-Robinson bounds and forms of restricted equilibration subject to the conserved quantities. Then we consider a Hubbard chain subject to Rashba spin-orbit coupling in thermal equilibrium. This system could very well be realized on a surface with the help of metallic adatoms. We find that we can analytically connect the given model to a model without spin-orbit coupling. This link enabled us to interpret various results for the standard Hubbard model, such as the single-particle spectra, now in the context of the Hubbard model with Rashba spin-orbit interaction. And finally we have considered a magnetic impurity in a host consisting of a topological insulator. We find that the impurity still exhibits the same features as known from the single impurity Anderson model. Additionally we study the effects of the impurity in the bath and we find that in the parameter regime where the Kondo singlet is formed the edge state of the topological insulator is rerouted around the impurity.}, subject = {Elektronenkorrelation}, language = {en} } @phdthesis{Fuchs2016, author = {Fuchs, Moritz Jakob}, title = {Spin dynamics in the central spin model: Application to graphene quantum dots}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136079}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {Due to their potential application for quantum computation, quantum dots have attracted a lot of interest in recent years. In these devices single electrons can be captured, whose spin can be used to define a quantum bit (qubit). However, the information stored in these quantum bits is fragile due to the interaction of the electron spin with its environment. While many of the resulting problems have already been solved, even on the experimental side, the hyperfine interaction between the nuclear spins of the host material and the electron spin in their center remains as one of the major obstacles. As a consequence, the reduction of the number of nuclear spins is a promising way to minimize this effect. However, most quantum dots have a fixed number of nuclear spins due to the presence of group III and V elements of the periodic table in the host material. In contrast, group IV elements such as carbon allow for a variable size of the nuclear spin environment through isotopic purification. Motivated by this possibility, we theoretically investigate the physics of the central spin model in carbon based quantum dots. In particular, we focus on the consequences of a variable number of nuclear spins on the decoherence of the electron spin in graphene quantum dots. Since our models are, in many aspects, based upon actual experimental setups, we provide an overview of the most important achievements of spin qubits in quantum dots in the first part of this Thesis. To this end, we discuss the spin interactions in semiconductors on a rather general ground. Subsequently, we elaborate on their effect in GaAs and graphene, which can be considered as prototype materials. Moreover, we also explain how the central spin model can be described in terms of open and closed quantum systems and which theoretical tools are suited to analyze such models. Based on these prerequisites, we then investigate the physics of the electron spin using analytical and numerical methods. We find an intriguing thermal flip of the electron spin using standard statistical physics. Subsequently, we analyze the dynamics of the electron spin under influence of a variable number of nuclear spins. The limit of a large nuclear spin environment is investigated using the Nakajima-Zwanzig quantum master equation, which reveals a decoherence of the electron spin with a power-law decay on short timescales. Interestingly, we find a dependence of the details of this decay on the orientation of an external magnetic field with respect to the graphene plane. By restricting to a small number of nuclear spins, we are able to analyze the dynamics of the electron spin by exact diagonalization, which provides us with more insight into the microscopic details of the decoherence. In particular, we find a fast initial decay of the electron spin, which asymptotically reaches a regime governed by small fluctuations around a finite long-time average value. Finally, we analytically predict upper bounds on the size of these fluctuations in the framework of quantum thermodynamics.}, subject = {Elektronenspin}, language = {en} } @phdthesis{Elsaesser2019, author = {Els{\"a}sser, Sebastian}, title = {Lattice dynamics and spin-phonon coupling in the multiferroic oxides Eu(1-x)Ho(x)MnO3 and ACrO2}, doi = {10.25972/OPUS-17971}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-179719}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The focus of this thesis is the investigation of the lattice dynamics and the coupling of magnetism and phonons in two different multiferroic model systems. The first system, which constitutes the main part in this work is the system of multiferroic manganites RMnO\$_{3}\$, in particular Eu\$_{1-x}\$Ho\$_{x}\$MnO\$_{3}\$ with \$0 \le x \le 0.5\$. Its cycloidal spin arrangement leads to the emergence of the ferroelectric polarization via the inverse Dzyaloshinskii-Moriya interaction. This system is special among RMnO\$_{3}\$ as with increasing Ho content \$x\$, Eu\$_{1-x}\$Ho\$_{x}\$MnO\$_{3}\$ does not only become multiferroic, but due to the exchange interaction with the magnetic Ho-ion, the spin cycloid (and with it the electric polarization) is also flipped for higher Ho contents. This makes it one of the first compounds, where the cycloidal reorientation happens spontaneously, rather than with the application of external fields. On the other hand, there is the delafossite ACrO\$_{2}\$ system. Here, due to symmetry reasons, the spin-spiral pattern can not induce the polarization according to the inverse Dzyaloshinskii-Moriya interaction mechanism. Instead, it is thought that another way of magnetoelectric coupling is involved, which affects the charge distribution in the \$d-p\$ hybridized orbitals of the bonds. The lattice vibrations as well as the quasi-particle of the multiferroic phase, the electromagnon, are studied by Raman spectroscopy. Lattice vibrations like the B\$_{3g}\$(1) mode, which involves vibrations of the Mn-O-Mn bonds modulate the exchange interaction and serve as a powerful tool for the investigation of magnetic correlations effects with high frequency accuracy. Raman spectroscopy acts as a local probe as even local magnetic correlations directly affect the phonon vibration frequency, revealing coupling effects onto the lattice dynamics even in the absence of global magnetic order. By varying the temperature, the coupling is investigated and unveils a renormalization of the phonon frequency as the magnetic order develops. For Eu\$_{1-x}\$Ho\$_{x}\$MnO\$_{3}\$, the analysis of this spin-induced phonon frequency renormalization enables the quantitative determination of the in-plane spin-phonon coupling strengths. This formalism, introduced by Granado et al., is extended here to evaluate the out-of-plane coupling strengths, which is enabled by the identification of a previously elusive feature as a vibrational mode. The complete picture is obtained by studying the lattice- and electromagnon dynamics in the magnetic field. Further emphasis is put towards the development of the cycloidal spin structure and correlations with temperature. A new model of describing the temperature-dependent behavior of said spin correlations is proposed and can consistently explain ordering phenomena which were until now unaddressed. The results are underscored with Monte Carlo based simulations of the spin dynamics with varying temperature. Furthermore, a novel effect of a tentative violation of the Raman selection rules in Eu\$_{1-x}\$Ho\$_{x}\$MnO\$_{3}\$ was discovered. While the phonon modes can be separated and identified by their symmetry by choosing appropriate polarization configurations, in a very narrow temperature range, Eu\$_{1-x}\$Ho\$_{x}\$MnO\$_{3}\$ shows an increase of phonon intensities in polarization configurations where they should be forbidden. This is interpreted as a sign of local disorder, caused by 90° domain walls and could be explained within the model framework. This course of action is followed with the material system of delafossites ACrO\$_{2}\$. Being a relatively new class of multiferroic materials, the investigations on ACrO\$_{2}\$ are also of characterizing nature. For this, shell model calculations are performed as a reference to compare the vibrational frequencies obtained by the Raman experiments to. A renormalization of the vibrational frequencies is observed in this system as well and systematically analyzed across the sample series of \textit{A}=Cu, Pd and Ag. Eventually, the effect of applying an external magnetic field is studied. A particularly interesting feature specific for CuCrO\$_{2}\$ is a satellite peak which appears at lower temperatures. It is presumably related to a deformation of the lattice and therefore going to be discussed in further detail.}, subject = {Festk{\"o}rperphysik}, language = {en} } @phdthesis{Boettcher2021, author = {B{\"o}ttcher, Jan Frederic}, title = {Fate of Topological States of Matter in the Presence of External Magnetic Fields}, doi = {10.25972/OPUS-22045}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-220451}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {The quantum Hall (QH) effect, which can be induced in a two-dimensional (2D) electron gas by an external magnetic field, paved the way for topological concepts in condensed matter physics. While the QH effect can for that reason not exist without Landau levels, there is a plethora of topological phases of matter that can exist even in the absence of a magnetic field. For instance, the quantum spin Hall (QSH), the quantum anomalous Hall (QAH), and the three-dimensional (3D) topological insulator (TI) phase are insulating phases of matter that owe their nontrivial topology to an inverted band structure. The latter results from a strong spin-orbit interaction or, generally, from strong relativistic corrections. The main objective of this thesis is to explore the fate of these preexisting topological states of matter, when they are subjected to an external magnetic field, and analyze their connection to quantum anomalies. In particular, the realization of the parity anomaly in solid state systems is discussed. Furthermore, band structure engineering, i.e., changing the quantum well thickness, the strain, and the material composition, is employed to manipulate and investigate various topological properties of the prototype TI HgTe. Like the QH phase, the QAH phase exhibits unidirectionally propagating metallic edge channels. But in contrast to the QH phase, it can exist without Landau levels. As such, the QAH phase is a condensed matter analog of the parity anomaly. We demonstrate that this connection facilitates a distinction between QH and QAH states in the presence of a magnetic field. We debunk therefore the widespread belief that these two topological phases of matter cannot be distinguished, since they are both described by a \$\mathbb{Z}\$ topological invariant. To be more precise, we demonstrate that the QAH topology remains encoded in a peculiar topological quantity, the spectral asymmetry, which quantifies the differences in the number of states between the conduction and valence band. Deriving the effective action of QAH insulators in magnetic fields, we show that the spectral asymmetry is thereby linked to a unique Chern-Simons term which contains the information about the QAH edge states. As a consequence, we reveal that counterpropagating QH and QAH edge states can emerge when a QAH insulator is subjected to an external magnetic field. These helical-like states exhibit exotic properties which make it possible to disentangle QH and QAH phases. Our findings are of particular importance for paramagnetic TIs in which an external magnetic field is required to induce the QAH phase. A byproduct of the band inversion is the formation of additional extrema in the valence band dispersion at large momenta (the `camelback'). We develop a numerical implementation of the \$8 \times 8\$ Kane model to investigate signatures of the camelback in (Hg,Mn)Te quantum wells. Varying the quantum well thickness, as well as the Mn-concentration, we show that the class of topologically nontrivial quantum wells can be subdivided into direct gap and indirect gap TIs. In direct gap TIs, we show that, in the bulk \$p\$-regime, pinning of the chemical potential to the camelback can cause an onset to QH plateaus at exceptionally low magnetic fields (tens of mT). In contrast, in indirect gap TIs, the camelback prevents the observation of QH plateaus in the bulk \$p\$-regime up to large magnetic fields (a few tesla). These findings allowed us to attribute recent experimental observations in (Hg,Mn)Te quantum wells to the camelback. Although our discussion focuses on (Hg,Mn)Te, our model should likewise apply to other topological materials which exhibit a camelback feature in their valence band dispersion. Furthermore, we employ the numerical implementation of the \$8\times 8\$ Kane model to explore the crossover from a 2D QSH to a 3D TI phase in strained HgTe quantum wells. The latter exhibit 2D topological surface states at their interfaces which, as we demonstrate, are very sensitive to the local symmetry of the crystal lattice and electrostatic gating. We determine the classical cyclotron frequency of surface electrons and compare our findings with experiments on strained HgTe.}, subject = {Topologie}, language = {en} } @article{BeckerMartin1972, author = {Becker, Charles R. and Martin, T. P.}, title = {Infrared absorption by Impurity-pair resonant modes in NaCl:F}, isbn = {1098-0121}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37840}, year = {1972}, abstract = {New resonant-mode infrared absorption lines have been observed in NaCl with high concentrations of fluorine impurities. The quadratic concentration dependence of the strength of these lines indicates that they are due to pairs of fluorine impurities. At the resonant frequencies, the motion of some host ions appears to be as important as the motion of the impurities themselves.}, subject = {Festk{\"o}rperphysik}, language = {en} }