@article{StepulaKoenigWangetal.2020,
  author    = {Stepula, Elzbieta and K{\"o}nig, Matthias and Wang, Xin-Ping and Levermann, Janina and Schimming, Tobias and Kasimir-Bauer, Sabine and Schilling, Bastian and Schl{\"u}cker, Sebastian},
  title     = {Localization of PD-L1 on single cancer cells by iSERS microscopy with Au/Au core/satellite nanoparticles},
  series = {Journal of Biophotonics},
  volume    = {13},
  journal   = {Journal of Biophotonics},
  number    = {3},
  doi       = {10.1002/jbio.201960034},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-212655},
  year      = {2020},
  abstract  = {Programmed cell death-ligand 1 (PD-L1) is an important predictive biomarker. The detection of PD-L1 can be crucial for patients with advanced cancer where the use of immunotherapy is considered. Here, we demonstrate the use of immuno-SERS microscopy (iSERS) for localizing PD-L1 on single cancer SkBr-3 cells. A central advantage of iSERS is that the disturbing autofluorescence from cells and tissues can be efficiently minimized by red to near-infrared laser excitation. In this study we employed Au/Au core/satellite nanoparticles as SERS nanotags because of their remarkable signal brightness and colloidal stability upon red laser excitation. False-color iSERS images of the positive and negative controls clearly reveal the specific localization of PD-L1 with SERS nanotag-labeled antibodies.},
  language  = {en}
}
@phdthesis{Schumm2008,
  author    = {Schumm, Marcel},
  title     = {ZnO-based semiconductors studied by Raman spectroscopy: semimagnetic alloying, doping, and nanostructures},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37045},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2008},
  abstract  = {ZnO-based semiconductors were studied by Raman spectroscopy and complementary methods (e.g. XRD, EPS) with focus on semimagnetic alloying with transition metal ions, doping (especially p-type doping with nitrogen as acceptor), and nanostructures (especially wet-chemically synthesized nanoparticles).},
  subject      = {Wide-gap-Halbleiter},
  language  = {en}
}
@phdthesis{Peica2006,
  author    = {Peica, Niculina},
  title     = {Vibrational spectroscopy and density functional theory calculations on biological molecules},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-20913},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2006},
  abstract  = {Infrared (IR) and Raman spectroscopy are among the most widely used techniques in the physical and natural sciences today. Vibrational spectroscopy, including IR and Raman spectroscopy, has both a long and interesting history and an illustrious record of contributions to science. Spectroscopy in the pharmaceutical industry is dominated by techniques such as nuclear magnetic resonance (NMR) and mass spectrometry (MS) for the elucidation of chemical structures. Despite this, the versatility of infrared spectroscopy ensures it still remains a key technique in quality control laboratories, and in applications where solid form characterization or minimal sample preparation is a necessity. Raman spectroscopy has many uses in the pharmaceutical and chemical industry, but its strengths is in solid form analysis. It is regularly used to identify compounds, and results are used in the release of pharmaceutical and chemical products. This work consists of 8 chapters, which cover the vibrational spectroscopy beginning with the theory and instrumentation, continuing with the experimental setup and probes description, and completing with results and discussions of the experiments. The first chapter of this work introduces Raman spectroscopy as a dominant technique used in pharmaceutical and chemical industry. The theoretical background regarding vibrational spectroscopy (IR and Raman) is accounted for in the second chapter of this work, while the samples presentation, the experimental procedures, and the description of the apparatus together with the computational details are briefly specified in the third chapter. The fourth chapter investigates the concentration dependent wavenumber shifts and linewidth changes of tetrahydrofuran in a binary system. Many of the applications in food science rely heavily on Raman spectroscopy, often preceding the biomedical applications. The characterization and identification of food additives using Raman, surface-enhanced Raman spectroscopy, and theoretical calculations is in detail depicted in the fifth chapter, whereas in the sixth and seventh chapters the monitoring of several medicines and various lanthanide complexes with anticancer properties, respectively, employing IR and Raman techniques are treated. These last two chapters address applications of vibrational spectroscopy to pharmaceutical products, and include the use of vibrational spectroscopy in combinatorial chemistry and density functional theory, a modality increasingly used by the pharmaceutical industry for the discovery if new pharmacologically active substances.},
  subject      = {Schwingungsspektroskopie},
  language  = {en}
}
@phdthesis{Mueller2011,
  author    = {M{\"u}ller, Christian},
  title     = {Physical Properties of Chromophore Functionalized Gold Nanoparticles},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-57657},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {n this work the synthesis and analysis of chromophore functionalized spherical gold nanoparticles is presented. The optical, electrochemical and spectroelectrochemical properties of these hybrid materials are furthermore studied. The work therefore is divided into two parts. The first part deals with triarylamine and PCTM-radical functionalized gold nanoparticles. The focus thereby was on the synthesis and on the investigations of chromophore-chromophore interactions and gold core-chromophore interactions. The chromopores, especially triarylamines, were attached to the gold core via different bridging units and were studied with optical and electrochemical methods. The purity and dimensions of the nanoparticles was determined by 1H-NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), TGA, XPS and STEM. Furthermore a cyclic voltammetry technique was used to determine the composition of the particles via the Randles-Sevcik equation. An analysis of these parameters led to a model of a sea urchin-shaped nanoparticle. Optical measurements of the particles revealed an anisotropic absorption behavior of the triarylamine units due to gold core-chromophore interaction. However this behavior depends strongly on the relative orientation of the transition dipole moment of the chromophore to the gold surface and the distance of the chromophore to the surface. Hence, the anisotropic behavior was exclusively detected in the spectra of the Au-Tara1 particles. The short and rigid pi-conjugated bridging unit thereby facilitates this gold core-chromophore interaction. It was shown from electrochemical investigations that the triarylamine units can be chemically reversibly oxidized to the triarylamine monoradical cation. Furthermore, the measurements revealed a strong interligand triarylamine-triarylamine interaction which was only seen for the Au-Tara1 particles. The long pi-conjugated bridging units of the Au-Tara2 and Au-Tara3 particles as well as the aliphatic bridging unit of Au-Tara4 prevent any detectable interligand interactions. One may conclude that both the gold core-chromophore and the interligand triarylamine-triarylamine interaction depend on the length and the rigidity of the bridging unit. The electron transfer behavior of the triarylamine units adsorbed onto the gold core was additionally studied via spectroelectrochemical (SEC) measurements which are able to reveal weaker interactions. The investigations of Au-Tara1 and Au-Tara2 revealed a significant strong coupling between neighboring triarylamine units which is due to through-space intervalence interactions. This behavior was not detected for Au-Tara3 or for Au-Tara4. The SEC analysis also revealed that these observed interligand interactions depend on the length and the rigidity of the bridging unit. Thus, the systematic variation of the bridging unit gave a basic insight in the optical and electrochemical properties of triarylamines, located in the vicinity of a gold nanoparticle. The second part of this work aimed at the synthesis of new molecules, denoted as SERS-markers, for immuno SERS applications. For this purpose, the SERS-markers were designed to have a Raman-active unit and a thiol group for chemisorptions to Au/Ag nanoshells. In cooperation with the group of Schl{\"u}cker (University of Osnabr{\"u}ck) the SERS-markers were absorbed onto Au/Ag nanoshells, denoted as SERS-labels, and characterized. The SERS spectra of the SERS-labels exhibited intense and characteristic SERS-signals for each marker. For immuno SERS investigations SEMA3 was functionalized with a hydrophilic end unit. This marker was adsorbed onto an Au/Ag nanoshell and encapsulated with silica. An anti-p63 antibody was bound to the silica surface in order to generate a SERS-labeled antibody for the detection of the tumor suppressor p63 in benign prostate. Immuno-SERS imaging of prostate tissue incubated with SERS-labeled anti-p63 antibodies demonstrated the selective detection of p63 in the basal epithelium. The results show the potential of the method for the detection of several biomolecules in a multiplexing SERS experiment.},
  subject      = {Gold},
  language  = {en}
}
@phdthesis{Bass2011,
  author    = {Baß, Utz},
  title     = {Analysis of MBE-grown II-VI Hetero-Interfaces and Quantum-Dots by Raman Spectroscopy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73413},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {The material system of interest in this thesis are II-VI-semiconductors. The first part of this thesis focuses on the formation of self-assembled CdSe-based quantum dots (QD) on ZnSe. The lattice constants of ZnSe and CdSe differ as much as about 7\\% and therefore a CdSe layer grown on top of ZnSe experiences a huge strain. The aspired strain relief constitutes in the self-assembly of QDs (i.e. a roughened layer structure). Additionally, this QD layer is intermixed with Zn as this is also a possibility to decrease the strain in the layer. For CdSe on ZnSe, in Molecular Beam Epitaxy (MBE), various QD growth procedures were analysed with respect to the resulting Cd-content of the non-stoichiometric ternary (Zn,Cd)Se. The evaluation was performed by Raman Spectroscopy as the phonon frequency depends on the Cd-content. The second part of the thesis emphasis on the interface properties of n-ZnSe on n-GaAs. Different growth start procedures of the ZnSe epilayer may lead to different interface configurations with characteristic band-offsets and carrier depletion layer widths. The analysis is mainly focused on the individual depletion layer widths in the GaAs and ZnSe. This non-destructive analysis is performed by evaluating the Raman signal which comprises of phonon scattering from the depleted regions and coupled plasmon-phonon scattering from regions with free carriers.},
  subject      = {Zwei-Sechs-Halbleiter},
  language  = {en}
}