@phdthesis{Polzien2011,
  author    = {Polzien, Lisa},
  title     = {BAD Phosphorylation: A Novel Link between Apoptosis and Cancer},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56919},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {BAD (Bcl-2 antagonist of cell death, Bcl-2 associated death promoter) is a pro-apoptotic member of the Bcl-2 protein family that is regulated by phosphorylation in response to survival factors. Although much attention has been devoted to the identification of phosphorylation sites in murine BAD (mBAD), little data are available with respect to phosphorylation of human BAD (hBAD) protein. In this work, we investigated the quantitative contribution of BAD targeting kinases in phosphorylating serines 75, 99 and 118 of hBAD (Chapter 3.1). Our results indicate that RAF kinases phosphorylate hBAD in vivo at these established serine residues. RAF-induced phosphorylation of hBAD was not prevented by MEK inhibitors but could be reduced to control levels by use of the RAF inhibitor Sorafenib (BAY 43-9006). Consistently, expression of active RAF suppressed apoptosis induced by hBAD and the inhibition of colony formation caused by hBAD could be prevented by RAF. In addition, using surface plasmon resonance technique we analyzed the direct consequences of hBAD phosphorylation by RAF with respect to complex formation of BAD with 14-3-3 proteins and Bcl-XL. Phosphorylation of hBAD by active RAF promotes 14-3-3 protein association, whereby the phosphoserine 99 represents the major binding site. Furthermore, we demonstrate in this work that hBAD forms channels in planar bilayer membranes in vitro. This pore-forming capacity is dependent on phosphorylation status and interaction with 14-3-3 proteins. Additionally, we show that hBAD pores possess a funnel-shaped geometry that can be entered by ions and non-charged molecules up to 200 Da (Chapter 3.2). Since both lipid binding domains of hBAD (LBD1 and LBD2) are located within the C-terminal region, we investigated this part of the protein with respect to its structural properties (Chapter 3.3). Our results demonstrate that the C-terminus of hBAD possesses an ordered β-sheet structure in aqueous solution that adopts helical disposition upon interaction with lipid membranes. Additionally, we show that the interaction of the C-terminal segment of hBAD with the BH3 domain results in the formation of permanently open pores, whereby the phosphorylation of serine 118 proved to be necessary for effective pore-formation. In contrast, phosphorylation of serine 99 in combination with 14-3-3 association suppresses formation of channels. These results indicate that the C-terminal part of hBAD controls hBAD function by structural transitions, lipid binding and phosphorylation. Using mass spectrometry we identified in this work, besides the established in vivo phosphorylation sites at serines 75, 99 and 118, several novel hBAD phosphorylation sites (serines 25, 32/34, 97, 124 and 134, Chapter 3.1). To further analyze the regulation of hBAD function, we investigated the role of these newly identified phosphorylation sites on BAD-mediated apoptosis. We found that in contrast to the N-terminal phosphorylation sites, the C-terminal serines 124 and 134 act in an anti-apoptotic manner (Chapter 3.4). Our results further indicate that RAF kinases and PAK1 effectively phosphorylate BAD at serine 134. Notably, in the presence of wild type hBAD, co-expression of survival kinases, such as RAF and PAK1, leads to a strongly increased proliferation, whereas substitution of serine 134 by alanine abolishes this process. Furthermore, we identified hBAD serine 134 to be strongly involved in survival signaling in B-RAF-V600E containing tumor cells and found phosphorylation of this residue to be crucial for efficient proliferation in these cells. Collectively, our findings provide new insights into the regulation of hBAD function by phosphorylation and its role in cancer signaling.},
  subject      = {Krebs <Medizin>},
  language  = {en}
}
@phdthesis{Shityakov2011,
  author    = {Shityakov, Sergey},
  title     = {Molecular modelling and simulation of retroviral proteins and nanobiocomposites},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56960},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Molecular modelling and simulation are powerful methods in providing important in-formation on different biological systems to elucidate their structural and functional proper-ties, which cannot be determined in experiment. These methods are applied to analyse versa-tile biological systems: lipid membrane bilayers stabilized by an intercalated single wall carbon nanotube and retroviral proteins such as HIV protease and integrase. HIV-1 integrase has nuclear localization signals (NLS) which play a crucial role in nuclear import of viral preintegration complex (PIC). However, the detailed mechanisms of PIC formation and its nuclear transport are not known. Previously it was shown that NLSs bind to the cell transport machinery e.g. proteins of nuclear pore complex such as transportins. I investigated the interaction of this viral protein HIV-1 integrase with proteins of the nuclear pore complex such as transportin-SR2 (Shityakov et al., 2010). I showed that the transportin-SR2 in nuclear import is required due to its interaction with the HIV-1 integrase. I analyzed key domain interaction, and hydrogen bond formation in transportin-SR2. These results were discussed in comparison to other retroviral species such as foamy viruses to better understand this specific and efficient retroviral trafficking route. The retroviral nuclear import was next analyzed in experiments regarding the retroviral ability to infect nondividing cells. To accomplish the gene transfer task successfully, ret-roviruses must efficiently transduce different cell cultures at different phases of cell cycle. However, promising and safe foamy viral vectors used for gene transfer are unable to effi-ciently infect quiescent cells. This drawback was due to their inability to create a preintegra-tion complex (PIC) for nuclear import of retroviral DNA. On the contrary, the lentiviral vec-tors are not dependant on cell cycle. In the course of reverse transcription the polypurine tract (PPT) is believed to be crucial for PIC formation. In this thesis, I compared the transduction frequencies of PPT modified FV vectors with lentiviral vectors in nondividing and dividing alveolar basal epithelial cells from human adenocarcinoma (A549) by using molecular cloning, transfection and transduction techniques and several other methods. In contrast to lentiviral vectors, FV vectors were not able to effi-ciently transduce nondividing cell (Shityakov and Rethwilm, unpublished data). Despite the findings, which support the use of FV vectors as a safe and efficient alternative to lentiviral vectors, major limitation in terms of foamy-based retroviral vector gene transfer in quiescent cells still remains. Many attempts have been made recently to search for the potential molecules as pos-sible drug candidates to treat HIV infection for over decades now. These molecules can be retrieved from chemical libraries or can be designed on a computer screen and then synthe-sized in a laboratory. Most notably, one could use the computerized structure as a reference to determine the types of molecules that might block the enzyme. Such structure-based drug design strategies have the potential to save off years and millions of dollars compared to a more traditional trial-and-error drug development process. After the crystal structure of the HIV-encoded protease enzyme had been elucidated, computer-aided drug design played a pivotal role in the development of new compounds that inhibit this enzyme which is responsible for HIV maturation and infectivity. Promising repre-sentatives of these compounds have recently found their way to patients. Protease inhibitors show a powerful sustained suppression of HIV-1 replication, especially when used in combi-nation therapy regimens. However, these drugs are becoming less effective to more resistant HIV strains due to multiple mutations in the retroviral proteases. In computational drug design I used molecular modelling methods such as lead ex-pansion algorithm (Tripos®) to create a virtual library of compounds with different binding affinities to protease binding site. In addition, I heavily applied computer assisted combinato-rial chemistry approaches to design and optimize virtual libraries of protease inhibitors and performed in silico screening and pharmacophore-similarity scoring of these drug candidates. Further computational analyses revealed one unique compound with different protease bind-ing ability from the initial hit and its role for possible new class of protease inhibitors is dis-cussed (Shityakov and Dandekar, 2009). A number of atomistic models were developed to elucidate the nanotube behaviour in lipid bilayers. However, none of them provided useful information for CNT effect upon the lipid membrane bilayer for implementing all-atom models that will allow us to calculate the deviations of lipid molecules from CNT with atomistic precision. Unfortunately, the direct experimental investigation of nanotube behaviour in lipid bilayer remains quite a tricky prob-lem opening the door before the molecular simulation techniques. In this regard, more de-tailed multi-scale simulations are needed to clearly understand the stabilization characteristics of CNTs in hydrophobic environment. The phenomenon of an intercalated single-wall carbon nanotube in the center of lipid membrane was extensively studied and analyzed. The root mean square deviation and root mean square fluctuation functions were calculated in order to measure stability of lipid mem-branes. The results indicated that an intercalated carbon nanotube restrains the conformational freedom of adjacent lipids and hence has an impact on the membrane stabilization dynamics (Shityakov and Dandekar, 2011). On the other hand, different lipid membranes may have dissimilarities due to the differing abilities to create a bridge formation between the adherent lipid molecules. The results derived from this thesis will help to develop stable nanobiocom-posites for construction of novel biomaterials and delivery of various biomolecules for medi-cine and biology.},
  subject      = {Kohlenstoff},
  language  = {en}
}
@phdthesis{ZamaniPedram2011,
  author    = {Zamani Pedram, Masoud},
  title     = {Source, facies, and sedimentary environments of the Middle to Upper Jurassic strata in the Kerman and Tabas areas, east-central Iran},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56758},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {The present study concerned mainly on the source, facies, and sedimentary environments of the Middle to Upper Jurassic strata in the Kerman and Tabas areas, east-central Iran. The composition of sandstones, and heavy mineral analysis point to pre-existing sedimentary, low, middle to upper rank metamorphic, and plutonic rocks of the Kalmard, Posht-e-Badam, Bayazeh, and Zarand-Kerman areas as the source rocks. According to the diagram of WELTJE et al. (1998), most samples from the Middle-Upper Jurassic rocks suggest a moderate to high elevation of the source area, and indicate a semi-arid and mediterranean to sub-humid climate. In the Qt-F-L ternary diagrams of DICKINSON et al. (1983), most point counting data from the Lower Siliciclastic Member and the top of the Hojedk Formation plot in the recycled orogen (Quartzose recycled) area of the diagram. The sandstones in this area can be interpreted as being derived from the Mid-Cimmerian Movements. Sixteen different types of siliciclastic-carbonate, and evaporatic sedimentary environments have been recognized. Thirty-nine macroinvertebrate taxa have been identified. Ten ichnotaxa have been taxonomically described from the Middle to Upper Jurassic rocks. Quite likely, before rotation of CEIM which were associated with counterclockwise block-rotation, equivalent rocks of the Bidou Formation occurred along the tectonic zone between the Yazd and the Tabas blocks (probably during the Middle Jurassic to Lower Cretaceous). However, from the Cretaceous onwards, most of the Bidou Formation has been removed by a combination of strike-slip and reverse movements of the Kashmar-Kerman tectonic zone. Roughly, these block-rotation movements occurred after the Cretaceous. During the Middle to Upper Jurassic, the tectonic activities were vertical movements producing the sedimentary pattern in the CEIM.},
  subject      = {Kerman <Region>},
  language  = {en}
}
@unpublished{Nassourou2011,
  author    = {Nassourou, Mohamadou},
  title     = {Design and Implementation of Architectures for Interactive Textual Documents Collation Systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56601},
  year      = {2011},
  abstract  = {One of the main purposes of textual documents collation is to identify a base text or closest witness to the base text, by analyzing and interpreting differences also known as types of changes that might exist between those documents. Based on this fact, it is reasonable to argue that, explicit identification of types of changes such as deletions, additions, transpositions, and mutations should be part of the collation process. The identification could be carried out by an interpretation module after alignment has taken place. Unfortunately existing collation software such as CollateX1 and Juxta2's collation engine do not have interpretation modules. In fact they implement the Gothenburg model [1] for collation process which does not include an interpretation unit. Currently both CollateX and Juxta's collation engine do not distinguish in their critical apparatus between the types of changes, and do not offer statistics about those changes. This paper presents a model for both integrated and distributed collation processes that improves the Gothenburg model. The model introduces an interpretation component for computing and distinguishing between the types of changes that documents could have undergone. Moreover two architectures implementing the model in order to solve the problem of interactive collation are discussed as well. Each architecture uses CollateX library, and provides on the one hand preprocessing functions for transforming input documents into CollateX input format, and on the other hand a post-processing module for enabling interactive collation. Finally simple algorithms for distinguishing between types of changes, and linking collated source documents with the collation results are also introduced.},
  subject      = {Softwarearchitektur},
  language  = {en}
}
@phdthesis{Tichy2011,
  author    = {Tichy, Michael},
  title     = {On algebraic aggregation methods in additive preconditioning},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56541},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {In the following dissertation we consider three preconditioners of algebraic multigrid type, though they are defined for arbitrary prolongation and restriction operators, we consider them in more detail for the aggregation method. The strengthened Cauchy-Schwarz inequality and the resulting angle between the spaces will be our main interests. In this context we will introduce some modifications. For the problem of the one-dimensional convection we obtain perfect theoretical results. Although this is not the case for more complex problems, the numerical results we present will show that the modifications are also useful in these situation. Additionally, we will consider a symmetric problem in the energy norm and present a simple rule for algebraic aggregation.},
  subject      = {Pr{\"a}konditionierung},
  language  = {en}
}
@book{FalkMarohnMicheletal.2011,
  author    = {Falk, Michael and Marohn, Frank and Michel, Ren{\´e} and Hofmann, Daniel and Macke, Maria and Tewes, Bernward and Dinges, Peter and Spachmann, Christoph and Englert, Stefan},
  title     = {A First Course on Time Series Analysis : Examples with SAS},
  organization    = {Universit{\"a}t W{\"u}rzburg / Lehrstuhl f{\"u}r Statistik},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56489},
  publisher      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {The analysis of real data by means of statistical methods with the aid of a software package common in industry and administration usually is not an integral part of mathematics studies, but it will certainly be part of a future professional work. The present book links up elements from time series analysis with a selection of statistical procedures used in general practice including the statistical software package SAS. Consequently this book addresses students of statistics as well as students of other branches such as economics, demography and engineering, where lectures on statistics belong to their academic training. But it is also intended for the practician who, beyond the use of statistical tools, is interested in their mathematical background. Numerous problems illustrate the applicability of the presented statistical procedures, where SAS gives the solutions. The programs used are explicitly listed and explained. No previous experience is expected neither in SAS nor in a special computer system so that a short training period is guaranteed. This book is meant for a two semester course (lecture, seminar or practical training) where the first three chapters can be dealt within the first semester. They provide the principal components of the analysis of a time series in the time domain. Chapters 4, 5 and 6 deal with its analysis in the frequency domain and can be worked through in the second term. In order to understand the mathematical background some terms are useful such as convergence in distribution, stochastic convergence, maximum likelihood estimator as well as a basic knowledge of the test theory, so that work on the book can start after an introductory lecture on stochastics. Each chapter includes exercises. An exhaustive treatment is recommended. Chapter 7 (case study) deals with a practical case and demonstrates the presented methods. It is possible to use this chapter independent in a seminar or practical training course, if the concepts of time series analysis are already well understood. This book is consecutively subdivided in a statistical part and an SAS-specific part. For better clearness the SAS-specific parts are highlighted. This book is an open source project under the GNU Free Documentation License.},
  subject      = {Zeitreihenanalyse},
  language  = {en}
}
@phdthesis{Liu2011,
  author    = {Liu, Wenlan},
  title     = {Exciton Coupling in Valence and Core Excited Aggregates of pi-Conjugated Molecules},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56169},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Im Rahmen dieser Arbeit werden theoretische Modelle zur Beschreibung von Valenz- und Rumpf-angeregten elektronischen Zust{\"a}nden diskutiert. Im Fall der Valenz-Anregungen wurden time-dependend Hartree-Fock (TD-HF) und timedependent Dichtefunktionaltheorie (TD-DFT)Methoden mit verschiedenen Funktionalen f{\"u}r ein Perylenbisimid (PBI) System validiert. Eine einfache Analyse der Charakt{\"a}re der angeregten Zust{\"a}nde wurde vorgeschlagen, die auf den berechneten {\"U}bergangsdipolmomenten basiert. Dieser Ansatz ist allerdings auf Zust{\"a}nde beschr{\"a}nkt, die ein signifikantes {\"U}bergangsdipolmoment aufweisen. Deshalb wurde eine allgemeinere und fundiertere Methode entwickelt, die auf einer Analyse der berechneten CISWellenfunktion basiert. Dar{\"u}berhinaus wurde ein literaturbekannter Model-Hamiltonoperator Ansatz von einem lokalisierten Molek{\"u}lorbitalbild (MO) abgeleitet, das aus der generelleren Analyse-Methode resultiert. Auf diesem Weg ist ein Zugang zu diabatischen angeregten Zust{\"a}nden und korrespondierenden Kopplungsparametern auf der Basis von ab initio Rechnungen gegeben. F{\"u}r rumpfangeregte elektronische Zust{\"a}nde wurden drei Methoden f{\"u}r C 1s-angeregte und ionisierte Zust{\"a}nde verschiedener kleiner Molek{\"u}le validiert. Dar{\"u}berhinaus wurde die Basissatzabh{\"a}ngigkeit dieser Zust{\"a}nde untersucht. Anhand der Resultate wurde die frozen core N{\"a}herung ausgew{\"a}hlt um rumpfangeregte Zust{\"a}nde von Naphthalintetracarbons{\"a}uredianhydrid (NTCDA) zu berechnen. Um experimentelle Ergebnisse zu erkl{\"a}ren, wurde ein Algorithmus entwicklet, der die Exzitonenkopplungsparameter im Fall von nicht-orthogonalen MOs berechnet.},
  subject      = {Exziton},
  language  = {en}
}
@phdthesis{DonadoGomez2011,
  author    = {Donado Gomez, Alejandro},
  title     = {Trade Unions and Occupational Health and Safety},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56076},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {This thesis comprises three essays that study the impact of trade unions on occupational health and safety (OHS). The first essay proposes a theoretical model that highlights the crucial role that unions have played throughout history in making workplaces safer. Firms traditionally oppose better health standards. Workplace safety is costly for firms but increases the average health of workers and thereby the aggregate labour supply. A laissez-faire approach in which firms set safety standards is suboptimal as workers are not fully informed of health risks associated with their jobs. Safety standards set by better-informed trade unions are output and welfare increasing. The second essay extends the model to a two-country world consisting of the capital-rich "North" and the capital-poor "South". The North has trade unions that set high OHS standards. There are no unions in the South and OHS standards are low. Trade between these two countries can imply a reduction in safety standards in the North, lowering the positive welfare effects of trade. Moreover, when trade unions are also established in the South, northern OHS standards might be further reduced. The third essay studies the impact of unions on OHS from an empirical perspective. It focuses on one component of OHS: occupational injuries. A literature summary including 25 empirical studies shows that most studies associate unions with less fatal occupational injuries. This is in perfect line with the anecdotal evidence and the basic model from the first essay. However, the literature summary also shows that most empirical studies associate unions with more nonfatal occupational injuries. This puzzling result has been explained in the literature by (1) lower underreporting in unionized workplaces, (2) unions being more able to organize hazardous workplaces, and (3) unionized workers preferring higher wages at the expense of better working conditions. Using individual-level panel data, this essay presents evidence against all these three explanations. However, it cannot reject the hypothesis that workers reduce their precautionary behaviour when they join a trade union. Hence, the puzzle seems to be due to a strong moral hazard effect. These empirical results suggest that the basic model from the first essay needs to be extended to account for this moral hazard effect.},
  subject      = {Arbeitsschutz},
  language  = {en}
}
@unpublished{Nassourou2011,
  author    = {Nassourou, Mohamadou},
  title     = {Assisting Understanding, Retention, and Dissemination of Religious Texts Knowledge with Modeling, and Visualization Techniques: The Case of The Quran},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55927},
  year      = {2011},
  abstract  = {Learning a book in general involves reading it, underlining important words, adding comments, summarizing some passages, and marking up some text or concepts. Once deeper understanding is achieved, one would like to organize and manage her/his knowledge in such a way that, it could be easily remembered and efficiently transmitted to others. In this paper, books organized in terms of chapters consisting of verses, are considered as the source of knowledge to be modeled. The knowledge model consists of verses with their metadata and semantic annotations. The metadata represent the multiple perspectives of knowledge modeling. Verses with their metadata and annotations form a meta-model, which will be published on a web Mashup. The meta-model with linking between its elements constitute a knowledge base. An XML-based annotation system breaking down the learning process into specific tasks, helps constructing the desired meta-model. The system is made up of user interfaces for creating metadata, annotating chapters' contents according to user selected semantics, and templates for publishing the generated knowledge on the Internet. The proposed software system improves comprehension and retention of knowledge contained in religious texts through modeling and visualization. The system has been applied to the Quran, and the result obtained shows that multiple perspectives of information modeling can be successfully applied to religious texts. It is expected that this short ongoing study would motivate others to engage in devising and offering software systems for cross-religions learning.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@unpublished{Nassourou2011,
  author    = {Nassourou, Mohamadou},
  title     = {Assisting Analysis and Understanding of Quran Search Results with Interactive Scatter Plots and Tables},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55840},
  year      = {2011},
  abstract  = {The Quran is the holy book of Islam consisting of 6236 verses divided into 114 chapters called suras. Many verses are similar and even identical. Searching for similar texts (e.g verses) could return thousands of verses, that when displayed completely or partly as textual list would make analysis and understanding difficult and confusing. Moreover it would be visually impossible to instantly figure out the overall distribution of the retrieved verses in the Quran. As consequence reading and analyzing the verses would be tedious and unintuitive. In this study a combination of interactive scatter plots and tables has been developed to assist analysis and understanding of the search result. Retrieved verses are clustered by chapters, and a weight is assigned to each cluster according to number of verses it contains, so that users could visually identify most relevant areas, and figure out the places of revelation of the verses. Users visualize the complete result and can select a region of the plot to zoom in, click on a marker to display a table containing verses with English translation side by side.},
  subject      = {Text Mining},
  language  = {en}
}
@phdthesis{Liu2011,
  author    = {Liu, Dan},
  title     = {Regional Myocardial Deformation in Adult Patients with Isolated Left Ventricular Non-compaction Cardiomyopathy},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55838},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Isolated left ventricular non-compaction cardiomyopathy (LVNC) is a congenital myocardial disease characterized by excessive and prominent trabeculations in the left ventricle with deep intertrabecular recesses. Trabeculation is, however, a non specific finding which is present not only in LVNC but also in other cardiomyopathies like dilated cardiomyopathy (DCM) and even in healthy controls, therefore, differential diagnosis keeps puzzling clinicians. Therefore the present study aimed to comprehensively explore regional myocardial deformation properties in adult patients with isolated LVNC using strain and strain rate imaging derived from tissue Doppler imaging and 2D speckle tracking. It was proposed that the knowledge of deformation properties in LVNC would help to differentiate patients with LVNC and DCM. A total of 14 patients with LVNC, 15 patients with DCM, and 15 healthy controls were included in this study. The groups were matched for age and gender. Standard 2D echocardiography was performed in all subjects, and tissue Doppler imaging (TDI) of all ventricular walls was acquired using parasternal long axis, apical 4-chamber, 2-chamber, and apical long axis views. Deformation imaging data derived from both TDI and grey scale images were analyzed. Clinical and standard echocardiographic findings in patients with LVNC and DCM were similar. In patients with LVNC, hypertrabeculation was mostly located in the apical and mid segments of the left ventricle and strikingly more than in patients with DCM. The extent of non-compaction was poorly related to global left ventricular systolic function (LVEF) as well as regional myocardial function assessed by strain rate imaging. Regional myocardial systolic deformation in patients with LVNC was significantly impaired in the left and right ventricles in both longitudinal and radial direction. There was a striking difference on longitudinal myocardial systolic function between LVNC and DCM patients, i.e., an increasing strain and strain rate gradient from apex to base in patients with LVNC, whereas patients with DCM displayed a homogeneously decreased strain and strain rate in all segments. Results derived from 2D speckle tracking method were consistent with those from TDI method. Analysis of myocardial mechanical asynchrony revealed a lack of myocardial contraction synchrony in the LVNC and DCM patients. The time to systolic peak velocity was obviously delayed in these two patient groups. However, the mechanical asynchrony features were similar in patients with LVNC and DCM and could not serve for differential diagnosis. In conclusion, LVNC and DCM are both cardiomyopathies presenting reduced regional myocardial function and mechanical asynchrony. Nevertheless differential diagnosis can be made by analysis of hypertrabeculation as well as analysis of regional myocardial deformation pattern.},
  subject      = {Ultraschallkardiographie},
  language  = {en}
}
@phdthesis{Gerdau2011,
  author    = {Gerdau, Ole},
  title     = {Applicability of Intrinsic Value Models at the Segmented Chinese Stock Market},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55652},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Ziel dieser Arbeit ist es, die Anwendbarkeit intrinsischer Wertmodelle in dem nach inl{\"a}ndischen und ausl{\"a}ndischen Investoren segmentierten chinesischen Kapitalmarkt zu untersuchen. Innerhalb des Frameworks der internationalen Portfolio Investment Theorie werden segmentspezifische Preisunterschiede nicht irrationalem Verhalten zugeschrieben, sondern als in {\"U}bereinstimmung mit {\"o}konomischer Theorie angesehen. Der theoretische Vergleich von Gleichgewichts- und intrinsischen Wertmodellen l{\"a}sst letztere f{\"u}r das chinesische Marktumfeld geeigneter erscheinen. Vor diesem Hintergrund wird in dieser Arbeit die Relevanz intrinsischer Wertmodelle f{\"u}r chinesische Aktienpreise empirisch untersucht. Demnach sind Preisunterschiede auf ungleiche Investitionsm{\"o}glichkeiten und segmentspezifische Charakteristika zur{\"u}ckzuf{\"u}hren. Dennoch f{\"u}hren die Ergebnisse im Hinblick auf den inl{\"a}ndischen und Hongkong-chinesischen risikolosen Zinsproxys zu dem Schluss, dass intrinsische Wertmodelle gegen{\"u}ber linearen Faktormodellen nicht als geeigneter angesehen werden k{\"o}nnen.},
  subject      = {China},
  language  = {en}
}
@article{GottschlichTisonMalecotetal.2011,
  author    = {Gottschlich, G{\"u}nter and Tison, Jean-Marc and Malecot, Val{\´e}ry and Rouillard, Thomas},
  title     = {Typification of names in genus Hieracium based on original herbariummaterial of Alexis Jordan and Alexandre Boreau},
  doi       = {10.3264/FG.2011.0301},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55533},
  year      = {2011},
  abstract  = {181 names of Hieracium species going back to original herbarium material of Alexis Jordan or Alexandre Boreau are lectotypified, 27 are neotypified. The study is based on herbarium specimens of the Universit{\´e} Catholique de Lyon (LY) and Ville d'Angers (ANG), Martrin-Donos's herbarium at the Institut Botanique de Montpellier (MPUTarn) and Arvet-Touvet's herbarium at the Mus{\´e}e d'Histoire Naturelle de Grenoble (GRM-AT). The type specimens are illustrated by photographs of the entire herbarium sheets with some detail views of flower heads and leaves. Usual nomenclatural synonyms are given for each taxon.},
  subject      = {Botanik},
  language  = {en}
}
@phdthesis{Hammer2011,
  author    = {Hammer, Maria},
  title     = {Charge transport in disordered organic and nanocrystalline inorganic semiconductors - Effect of charge carrier density variation},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55188},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {The charge transport properties of disordered organic and nanocrystalline inorganic semiconductors as well as their combinations have been investigated in regard to the charge carrier density employing field-effect-transistor structures. The results were discussed in the framework of different theoretical models. In organic semiconductors the presence of positional and energetic disorder determines the transport of charges through the respective thin films and interfaces. The electronic disorder is characterized by statistically distributed and localized transport sites which were shown to form a Gaussian density of states. In this electronic environment the charge transport occurs via thermally activated hopping between the localized states and therefore depends on the temperature and the local electric field. Particularly, a dependence of the carrier mobility on the charge carrier concentration is observed due to filling of tail states. Inorganic nanocrystalline semiconductors, however, are expected to present a different electronic structure: Within the volume of a nanocrystallite the semiconductor is assumed to reflect the electronic properties of the crystalline bulk material. However, the outer shell is characterized by a relatively large density of surface states and correspondingly bending of the energy bands, which creates an energetic barrier between the adjacent particles. In a nanocrystalline thin film this characteristic can be rate-limiting for the inter-particle carrier transport as reflected by reduced charge carrier mobility. The effective barrier height can be reduced by controlled doping of the nanocrystals which results in improved majority carrier transfer rates across the barrier. However, doping results in the simultaneous increase of the defect density and consequently to enhanced limitation of the mobility due to charge carrier scattering. In the experiments, thin films of commercially available p- and n-type organic semiconductors (P3HT, and two derivatives of PCBM) were investigated in field-effect transistor structures. Further, sol-gel synthesized n-type nanocrystalline-ZnO (nc-ZnO) with varied doping concentration (agent: aluminum Al\$^{3+}\$) was introduced in order to establish an alternative way of customizing the charge transport properties of the neat material and in combination with the organic polymer semiconductor P3HT.},
  subject      = {Ladungstransport},
  language  = {en}
}
@unpublished{Nassourou2011,
  author    = {Nassourou, Mohamadou},
  title     = {A Knowledge-based Hybrid Statistical Classifier for Reconstructing the Chronology of the Quran},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-54712},
  year      = {2011},
  abstract  = {Computationally categorizing Quran's chapters has been mainly confined to the determination of chapters' revelation places. However this broad classification is not sufficient to effectively and thoroughly understand and interpret the Quran. The chronology of revelation would not only improve comprehending the philosophy of Islam, but also the easiness of implementing and memorizing its laws and recommendations. This paper attempts estimating possible chapters' dates of revelation through their lexical frequency profiles. A hybrid statistical classifier consisting of stemming and clustering algorithms for comparing lexical frequency profiles of chapters, and deriving dates of revelation has been developed. The classifier is trained using some chapters with known dates of revelation. Then it classifies chapters with uncertain dates of revelation by computing their proximity to the training ones. The results reported here indicate that the proposed methodology yields usable results in estimating dates of revelation of the Quran's chapters based on their lexical contents.},
  subject      = {Text Mining},
  language  = {en}
}