@phdthesis{Pavel2003, author = {Pavel, Ioana-Emilia}, title = {Vibrational spectroscopy and density functional theory calculations, a powerful approach for the characterization of pharmaceuticals and new organometallic complexes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-7186}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {In the current work, several well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) and new organometallic compounds (nickel(II) cupferronato complexes NiL2An, L = PhN2O2-, n = 1, A = o-phenanthroline (1), o,o'-bipyridine (2) and n = 2, A = H2O (3), o-NH2Py (4), o-C6H4(NH2)2 (5); silylene-bridged dinuclear iron complexes [Cp(OC)2Fe]2SiX2 (X = H (6), F (7), Cl (8), Br (9), I (10)); 3-silaoxetane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-oxa-3-silacyclobutane (11) and 3-silathietane 3,3-dimethyl-2,2,4,4-tetraphenyl-1-sila-3-thiacyclobutane (12) compounds), which have successfully been characterized by using vibrational spectroscopy in conjunction with accurate density functional theory (DFT) calculations, are presented. The DFT computed molecular geometries of the species of interest reproduced the crystal structure data very well and in conjunction with IR and Raman measurements helped us to clarify the structures of the compounds, for which no experimental data were available; and this, especially for the new organometallic compounds, where the X-Ray analysis was limited by the non-availability of single crystals (3, 5, 10). Furthermore, a natural population analysis (NPA) and natural bond orbital (NBO) calculations together with a detailed analysis of the IR and Raman experimental as well as calculated spectra of the new organometallic compounds, allowed us to study some special bonding situations (1-12) or to monitor the structural changes observed with the change in temperature during the Raman experiments (11, 12). By combining these two methods (DFT and vibrational spectroscopy), the auspicious results obtained on the organometallic compounds 6-12 and overall in literature, made us confident of the power of theoretical calculations in aiding the interpretation of rich SERS spectra by solving some interesting issues. Consequently, the Raman and SERS spectra of well-known pharmaceuticals (1,4-dihydrazinophthalazine sulfate, caffeine, and papaverine hydrochloride) or new potentially biological active organometallic complexes (1-5), that were synthetized by our coworkers, were discussed with the assistance of the accurate results obtained from DFT calculations (structural parameters, harmonic vibrational wavenumbers, Raman scattering activities), and many previous incomplete assignments have been analyzed and improved. This allowed us to establish the vibrational behavior of these biological compounds near a biological artificial model at different pH values or concentrations (Ag substrate), taking into account that information about the species present under particular conditions could be of great importance for the interpretation of biochemical processes. The total electron density of molecules and the partial charges situated on selected atoms, which were determined theoretically by NPA, allowed us to establish the probability of different atoms acting as an adsorptive site for the metal surface. Moreover, a closer examination of the calculated orbitals of molecules brought further arguments on the presence or absence of the photoproducts at the Ag surface during the irradiation (1,4-dihydrazinophthalazine sulfate). Overall, the results provide a benchmark illustration of the virtues of DFT in aiding the interpretation of rich vibrational spectra attainable for larger polyatomic adsorbates by using SERS, as well as in furnishing detailed insight into the relation between the vibrational properties and the nature of the Ag substrate-adsorbate bonding. Therefore, we strongly believe that theoretical calculations will become a matter of rapidly growing scientific and practical interest in SERS.}, subject = {Arzneimittel}, language = {en} } @phdthesis{Peica2006, author = {Peica, Niculina}, title = {Vibrational spectroscopy and density functional theory calculations on biological molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-20913}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {Infrared (IR) and Raman spectroscopy are among the most widely used techniques in the physical and natural sciences today. Vibrational spectroscopy, including IR and Raman spectroscopy, has both a long and interesting history and an illustrious record of contributions to science. Spectroscopy in the pharmaceutical industry is dominated by techniques such as nuclear magnetic resonance (NMR) and mass spectrometry (MS) for the elucidation of chemical structures. Despite this, the versatility of infrared spectroscopy ensures it still remains a key technique in quality control laboratories, and in applications where solid form characterization or minimal sample preparation is a necessity. Raman spectroscopy has many uses in the pharmaceutical and chemical industry, but its strengths is in solid form analysis. It is regularly used to identify compounds, and results are used in the release of pharmaceutical and chemical products. This work consists of 8 chapters, which cover the vibrational spectroscopy beginning with the theory and instrumentation, continuing with the experimental setup and probes description, and completing with results and discussions of the experiments. The first chapter of this work introduces Raman spectroscopy as a dominant technique used in pharmaceutical and chemical industry. The theoretical background regarding vibrational spectroscopy (IR and Raman) is accounted for in the second chapter of this work, while the samples presentation, the experimental procedures, and the description of the apparatus together with the computational details are briefly specified in the third chapter. The fourth chapter investigates the concentration dependent wavenumber shifts and linewidth changes of tetrahydrofuran in a binary system. Many of the applications in food science rely heavily on Raman spectroscopy, often preceding the biomedical applications. The characterization and identification of food additives using Raman, surface-enhanced Raman spectroscopy, and theoretical calculations is in detail depicted in the fifth chapter, whereas in the sixth and seventh chapters the monitoring of several medicines and various lanthanide complexes with anticancer properties, respectively, employing IR and Raman techniques are treated. These last two chapters address applications of vibrational spectroscopy to pharmaceutical products, and include the use of vibrational spectroscopy in combinatorial chemistry and density functional theory, a modality increasingly used by the pharmaceutical industry for the discovery if new pharmacologically active substances.}, subject = {Schwingungsspektroskopie}, language = {en} } @phdthesis{Bolboaca2002, author = {Bolboaca, Monica-Maria}, title = {Vibrational characterisation of coordination and biologically active compounds by means of IR absorption, Raman and surface-enhanced Raman spectroscopy in combination with theoretical simulations}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-4616}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {The thesis contains two major parts. The first part deals with structural investigations on different coordination compounds performed by using infrared absorption and FT-Raman spectroscopy in combination with density functional theory calculations. In the first section of this part the starting materials Ph2P-N(H)SiMe3 and Ph3P=NSiMe3 and their corresponding [(MeSi)2NZnPh2P-NSiMe3]2 and Li(o-C6H4PPh2NSiMe3)]2·Et2O complexes have been investigated in order to determine the influence of the metal coordination on the P-N bond length. In the next section the vibrational spectra of four hexacoordinated silicon(IV) and germanium(IV) complexes with three symmetrical bidentate oxalato(2-) ligands have been elucidated. Kinetic investigations of the hydrolysis of two of them, one with silicon and another one with germanium, have been carried out at room temperature and at different pH values and it was observed that the hydrolysis reaction occurs only for the silicon compound, the fastest reaction taking place at acidic pH. In the last section of this part, the geometric configurations of some hexacoordinated silicon(IV) complexes with three unsymmetrical bidentate hydroximato(2-) ligands have been determined. The second part of the thesis contains vibrational investigations of some biologically active molecules performed by means of Raman spectroscopy together with theoretical simulations. The SER spectra of these molecules at different pH values have also been analysed and the adsorption behaviour on the metal surface as well as the influence of the pH on the molecule-substrate interaction have been established.}, subject = {Komplexe}, language = {en} } @phdthesis{Marquetand2007, author = {Marquetand, Philipp}, title = {Vectorial properties and laser control of molecular dynamics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-24697}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {In this work, the laser control of molecules was investigated theoretically. In doing so, emphasis was layed on entering vectorial properties and in particular the orientation in the laboratory frame. Therefore, the rotational degree of freedom had to be included in the quantum mechanical description. The coupled vibrational and rotational dynamics was examined, which is usually not done in coherent control theory. Local control theory was applied, where the field is determined from the dynamics of a system, which reacts with an instantaneous response to the perturbation and, in turn, determines the field again. Thus, the field is entangled with the quantum mechanical motion and the presented examples document, that this leads to an intuitive interpretation of the fields in terms of the underlying molecular dynamics. The limiting case of a classical treatment was shown to give similar results and hence, eases to understand the complicated structure of the control fields. In a different approach, the phase- and amplitude shaping of laser fields was systematically studied in the context of controlling population transfer in molecules.}, subject = {Laserchemie}, language = {en} } @phdthesis{Lang2015, author = {Lang, Melanie}, title = {Valence Shell Photoionization of Soot Precursors with Synchrotron Radiation}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-117038}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {A series of combustion relevant species like radicals, carbenes and polycyclic aromatic hydrocarbons were characterized in the gas phase by vacuum UV synchrotron radiation and their ionization energies (IE) and further spectroscopic details of the respective cations were retrieved from threshold photoelectron spectra. The reactive intermediates were generated by flash vacuum pyrolysis from stable precursor molecules. Furthermore three polycyclic aromatic hydrocarbons were investigated by threshold photoelectron spectroscopy, too. The experiment was performed at the VUV beamline of the Swiss Light Source in Villigen/Switzerland and the iPEPICO (imaging photoelectron photoion coincidence) setup was applied to correlate ions and electrons from the same ionization event. From the threshold photoelectron spectra and from quantum chemical computations the vibrational structure of the molecule cations and the geometry changes upon ionization were assigned. The ionization energies of the two C4H5 isomers 2-butyn-1-yl and 1-butyn-3-yl were assigned to 7.94±0.02 eV and 7.97±0.02 eV, respectively. The isomerization between the two isomers was computed to have a barrier of 2.20 eV, so a rearrangement between the two radicals cannot be excluded. From the threshold photoelectron spectra of the two constitutional C4H7 isomers 1-methylallyl and 2-methylallyl the ionization energies were assigned to 7.48±0.02 eV and to 7.59±0.02 eV for 1-E-methylallyl and 1-Z-methylallyl, as well as to 7.88±0.01 eV for 2-methylallyl. The two radicals 9-fluorenyl, C13H9, and benzhydryl, C13H11, were observed to ionize at 7.01±0.02 eV and 6.7 eV. The threshold photoelectron spectrum of benzhydryl also incorporated the signal of the diphenylmethyl carbene, C13H10, which has an IE at 6.8 eV. In addition, the head-to-head dimers of 9-fluorenyl and benzhydryl were observed as products in the pyrolysis. C26H18 has an IE at 7.69±0.04 eV and C26H22 has an IE at 8.13±0.04 eV. The three polycyclic aromatic hydrocarbon DHP (C14H16) 1-PEN (C18H22) and THCT (C22H16) were investigated in an effusive beam. The ionization energies were determined to IE(DHP)= 7.38±0.02 eV, IE(1-PEN)=7.58±0.05 eV and IE(THCT)=6.40±0.02 eV. Furthermore the thermal decomposition and the dissociative photoionization of diazomeldrum's acid was investigated. The pyrolysis products yielded beside several other products the two not yet (by photoelectron spectroscopy) characterized molecules E-formylketene, C3O2H2 and 2-diazoethenone, N2C2O. The dissociative photoionization showed the Wolff rearrangement to occur at higher internal energies.}, subject = {Ultraviolett-Photoelektronenspektroskopie}, language = {en} } @phdthesis{Schleier2021, author = {Schleier, Domenik}, title = {Using Photoionization to Investigate Reactive Boron Species and the Kinetics of Hydrocarbon Radicals}, doi = {10.25972/OPUS-24213}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-242137}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {This thesis highlights the importance of isomer-selective approaches for the complete analysis of chemical processes. The method of choice is photoelectron/photoion coincidence spectroscopy, which allows simultaneous detection of electrons and ions coming from a single ionization event. Ionization techniques are sensitive and can record multiple species simultaneously, rendering them ideal tools to probe molecular transformations. Coupling these setups to synchrotron radiation allows one to analyze complex mixtures with isomer selectivity, based on ionization energies and vibrational structure in the cation, without any prior separation steps. Only few setups exist that can be used to gather these data, although their impact and applicability is growing steadily in various fields. For closed-shell species an easier and more widely used method is gas-chromatography, but most open shell species would not survive the separation process. Due to the reactivity of radicals they have to be created by selectively converting stable precursor molecules. Depending on the radical generation method different properties can be investigated ranging from thermodynamic data, over concentrations in high temperature environments, to chemical kinetics. The first part of this thesis deals with the determination of bimolecular rate constants. Isomeric hydrocarbon radicals were generated by a high intense UV light pulses and their kinetics with oxygen was measured. The pressure dependence of different isomers in the falloff region was compared to theoretical models, and their reactivity could be explained. The second part deals with boron containing compounds in various electronic situations. The corresponding precursors were successfully synthesized or could be bought. They were subjected to fluorine atoms in chemical reactors or destroyed pyrolytically at high temperatures. Most investigated species exhibited vibronic effects that could be elucidated using high level computations.}, subject = {Biradikal}, language = {en} } @phdthesis{Rudolf2014, author = {Rudolf, Philipp Benjamin}, title = {Uncovering photoinduced chemical reaction pathways in the liquid phase with ultrafast vibrational spectroscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96200}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {The experimental technique predominantly employed within the scope of this Thesis constitutes one subarea of femtochemistry: the time-resolved spectroscopy of photoin- duced chemical reactions in the liquid phase by means of molecular signatures in the mid-infrared (MIR) spectral range. Probing transient vibrational states, i.e., dynamic changes in the vibrational motion of speci� c molecular subunits or functional Groups allows for a distinct separation and assignment of measured signals to emerging molecular species. For this purpose, one key building block is indispensable, which most of the investigations carried out within the � eld of femtochemistry have in common: a coherent light source delivering ultrashort laser pulses with a temporal duration that matches the femtosecond time scale on which molecular motions typically occur. This instrumentation enables the observation of photoinduced chemical reactions from the starting point|the excitation event to the appearance of intermediates to the nal formation of stable photoproducts after several pico- or nanoseconds. This work comprises the acquisition and presentation of time-resolved spectroscopic data related to promising molecular systems upon photoexcitation as well as the im- plementation and testing of experimental optical techniques both for the presented experiments but as well for experiments conceivable in the future. In addition, linear spectroscopy measurements and quantum-chemical simulations on the emerging chemical species have been carried out. In so doing, the primary processes and subse- quently emerging reaction products of two compounds on a timescale of several nanoseconds after photoexcitation have been elucidated in great detail. Both compounds, the [Mn(CO)3(tpm)]+ (tpm = tris(2-pyrazolyl)methane) CO-releasing molecule (CORM) and the 5-diazo Meldrum's acid (DMA), are of academic interest but in addition belong to molecular classes that might be utilized in the near future as dark-stable prodrugs under physiological conditions or that are already utilized in industrial chemistry procedures, respectively. The � ndings of both studies gave rise to implement and examine two techniques for prospective transient absorption experiments, namely the shaping and characterization of ultraviolet (UV) laser pulses and the recording of two-photon excitation spectra. Beyond that, since each of the depicted experiments is based on the detection of weak transient absorption signals in the MIR spectral region, two dif- ferent detection schemes, via chirped-pulse upconversion (CPU) on the one hand and via direct multichannel MCT detection on the other hand, have been juxtaposed at the conclusion of this work. Since both techniques are suitable in femtosecond pump-probe measurements but thereby exhibit individual strengths and weaknesses, a comparative study provides clari� cation of the respective pros and cons. The � first study introduced within this work investigates the complex photochemistry of DMA, a photoactive compound used in lithography and industrial chemistry. By femtosecond MIR transient absorption spectroscopy covering several nanoseconds, the light-induced dynamics and ultrafast formation of several photoproducts from the manifold of reaction pathways have been disclosed to form a coherent picture of the overall reaction scheme. After UV excitation of DMA dissolved in methanol to the second excited state S2, 70\% of excited molecules relax back to the S0 ground state. In compet- ing processes, they can either undergo an intramolecular Wolff rearrangement to form ketene, which reacts with a solvent molecule to an enol intermediate and further to carboxylate ester, or they � rst relax to the DMA S1 state, from where they can isomerize to a diazirine. The third competing reaction channel, having the lowest quantum efficiency with respect to the � rst two channels, is the formation of a singlet carbene out of the S1 state. From there an ylide can arise or, via an intersystem crossing, the triplet form of the carbene follows. Whereas the primary reaction steps occur on a picosecond timescale, the subsequently arising intermediates and stable photoproducts are formed within a few hundreds to thousands of picoseconds. For a reliable identi� cation of the involved compounds, density functional theory calculations on the normal modes and Fourier-transform infrared spectroscopy of the reactant and the photoproducts in the chemical equilibrium accompany the analysis of the transient spectra. Additional experiments in ethanol and isopropanol led to slight spectral shifts as well as elongated time constants due to steric hindrance in transient spectra connected with the ester Formation channel, further substantiating the assignment of the occurring reaction pathways and photoproducts. The study demonstrated that the combination of linear and time-resolved spectroscopic measurements in conjunction with quantum-chemical calculations constitutes a powerful tool to unravel even highly complex photoreactions exhibiting multiple consecutive intermediate states within parallel reaction pathways. Although some of the individual reaction steps, for example the ketene formation via Wolff rearrangement, have been observed on ultrashort time scales before, this work encompassed the Observation of the whole set of appearing photoproducts of DMA in different alcohol solutions within several nanoseconds. In this sense, the ultrafast photochemistry of DMA represents a prototype example for a multisequential reaction scheme, elucidated by the capabilities of femtosecond MIR spectroscopy. With a modi� fied instrumentation concerning amongst others the system delivering the fundamental laser pulses or the generation of the UV pump pulses, the next ob- jective within this work was to elucidate the primary processes upon UV Irradiation of a manganese tricarbonyl CORM in aqueous environment. The time-resolved experiment was performed with two different pump wavelengths and furthermore supported by linear spectroscopy methods and time-dependent density functional theory (TDDFT) calculations on the excited states as well as DFT calculations on the ground states. The measurements revealed that irradiating the compound with UV excitation pulses primarily leads to ultrafast photolysis of one CO ligand. Geminate recombination may occur within one picosecond but it remains a minor process as the photolyzed CO group is liberated and the unoccupied coordination site is predominantly fi� lled by an incoming solvent molecule. There was no evidence for hot CO bands, i.e., the remaining CO ligands|in the dicarbonyl photoproduct as well as in the intact CORM are not vibrationally excited through the UV excitation of the CORM. According to this, the excess energy merges into low-frequency vibrational modes associated with the molecule as a whole. Since studies on a macroscopic scale at irradiation times of several minutes prove that UV irradiation eventually leads to the release of two or even all three CO ligands, further loss of CO most likely necessitates manganese oxidation or another interaction with light. To clarify the latter, a consecutive UV pulse was employed in order to excite the photoproducts subsequent to the initial pump interaction. However, the data obtained was not instructive enough to de� nitely exclude the manganese oxidation being responsible for the loss of further CO groups. Besides the exchange of a CO Group by a solvent molecule or the geminate recombination, the employment of two different excitation wavelengths in combination with � ndings derived from the TDDFT calculations suggested another reaction process, namely the possibility that the excitation does not lead to any bond cleavage at all. As the CORM under investigation is tissue-selective and cytotoxic against cancer cells, knowledge of these � rst photoinduced reaction steps is essential for a full understanding of its biological activity. Inspired by these two studies, experimental techniques for prospective transient absorption measurements have been implemented and tested within preparative measure- ments. First, in the course of a UV-pump-MIR-probe experiment with speci� cally tailored excitation pulses, one could pursue the aim of coherently controlling the outcome of a photoreaction in the liquid phase. Out of the rich photochemistry of DMA the vibrational signature of a particular molecular species might thereby serve as a feedback signal, which is a central part of a learning loop that adaptively determines the pulse shape that steers the quantum mechanical system upon photoexcitation into a desired direction. This motivated the installation and testing of devices by means of which the shaping and characterization of ultrashort laser pulses in the UV could be performed. Second, motivated by the biological applications of CORMs, one can imagine a scenario where a certain amount of CORMs is deposited inside cancerous tissue. Since the activation of CO loss by means of UV pulses is not possible due to the absorption characteristics of biological tissue, the simultaneous excitation via two photons from the visible spectral regime seems appealing. However, success or failure of such an application depends on whether the deposited compound efficiently absorbs two photons simultaneously, i.e., whether the two-photon absorption cross section is large enough. Therefore, a setup to record two-photon excitation spectra under full consideration of the crucial laser pulse parameters like the pulse duration, energy and central wavelength was arranged and tested. The � rst results were obtained with a commercially available reference system (Mn2CO10) but the setup as well as the described measurement and data analysis procedure can easily be applied to record the two-photon absorption cross section of more promising molecular systems. Third, as the detection of probe pulses in the MIR spectral region is part of each time-resolved measurement throughout this thesis, a comparison between the newly established technique of CPU and direct multi- channel MCT detection is presented by means of pump{probe experiments on Mn2CO10 and Co4CO12 with a 1 kHz shot-to-shot data acquisition. It was shown that the CPU detection technique scores with its high spectral resolution and coverage of the easy-to-handle and more cost-effective CCD detectors. On the other hand, in the course of the additional nonlinear upconversion process intensity fluctuations of the chirped fundamental pulses are transferred to the probe spectrum in the visible regime. This entails a lower signal-to-noise ratio than the direct MCT detection, which can be compensated by an additional normalization procedure applied to the CPU probe pulses. As a consequence, the CPU detection scheme offers more flexibility for future investigations employing MIR probe pulses. This is of great importance for many applications within the presented � eld of femtochemistry as a huge variety of time-resolved investigations on a multitude of systems in the liquid phase is based on the detection of weak transient absorption signals in the MIR spectral region.}, subject = {Ultrakurzzeitspektroskopie}, language = {en} } @unpublished{PetersenLindnerMitric2018, author = {Petersen, Jens and Lindner, Joachim O. and Mitric, Roland}, title = {Ultrafast Photodynamics of Glucose}, series = {Journal of Physical Chemistry B}, journal = {Journal of Physical Chemistry B}, doi = {10.1021/acs.jpcb.7b08602}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159155}, year = {2018}, abstract = {We have investigated the photodynamics of \(\beta\)-D-glucose employing our field-induced surface hopping method (FISH), which allows us to simulate the coupled electron-nuclear dynamics, including explicitly nonadiabatic effects and light-induced excitation. Our results reveal that from the initially populated S\(_{1}\) and S\(_{2}\) states, glucose returns nonradiatively to the ground state within about 200 fs. This takes place mainly via conical intersections (CIs) whose geometries in most cases involve the elongation of a single O-H bond, while in some instances ring-opening due to dissociation of a C-O bond is observed. Experimentally, excitation to a distinct excited electronic state is improbable due to the presence of a dense manifold of states bearing similar oscillator strengths. Our FISH simulations explicitly including a UV laser pulse of 6.43 eV photon energy reveals that after initial excitation the population is almost equally spread over several close-lying electronic states. This is followed by a fast nonradiative decay on the time scale of 100-200 fs, with the final return to the ground state proceeding via the S\(_{1}\) state through the same types of CIs as observed in the field-free simulations.}, language = {en} } @phdthesis{Dietzek2005, author = {Dietzek, Benjamin}, title = {Ultrafast linear and non-linear spectroscopy : from biological light-receptors to artificial light-harvesting systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15684}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {In the experiments presented in this work, linear and non-linear femtosecond time-resolved spectrsocopy were applied to investigate the structure-function and functiondynamics relationship in biological and artificially designed systems. The experiments presented in this work utilize femtosecond time-resolved transient absorption and transient grating as well as picosecond time-resolved fluorescence spectroscopy to investigate the photophysics and photochemistry of biological photoreceptors and address the light-induced excited-state processes in a particular molecular device that serves as a - structurally - very simple light-harvesting antenna and potentially as a catalysis-switch for the production of hydrogen in solution. The combination of white-light probe transient absorption and coherent transient grating spectroscopies yields spectral information about the excited state absorption in concert with high quality, high signal-to-noise kinetic transients, which allow for precise fitting and therefore very accurate time-constants to be extracted from the data. The use of femtosecond time-resolved transient grating spectroscopy is relatively uncommon in addressing questions concerning the excited-state reaction pathways of complex (biological) systems, and therefore the experiments presented in this work constitute according to the literature the first studies applying this technique to a a metalloporphyrin and an artificial light-harvesting antenna.}, subject = {Femtosekundenspektroskopie}, language = {en} } @article{EngelAlbertSchubert2013, author = {Engel, Volker and Albert, Julian and Schubert, Alexander}, title = {Two-dimensional vibronic spectroscopy of molecular predissociation}, series = {New Journal of Physics}, journal = {New Journal of Physics}, doi = {10.1088/1367-2630/15/2/025008}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96199}, year = {2013}, abstract = {We calculate two-dimensional (2D) spectra reflecting the time-dependent electronic predissociation of a diatomic molecule. The laser-excited electronic state is coupled non-adiabatically to a fragment channel, leading to the decay of the prepared quasi-bound states. This decay can be monitored by the three-pulse configuration employed in optical 2D spectroscopy. It is shown that in this way it is possible to state-selectively characterize the time-dependent population of resonance states with different lifetimes. A model of the NaI molecule serves as a numerical example.}, language = {en} } @article{SchmidtFantuzziKlopfetal.2021, author = {Schmidt, Paul and Fantuzzi, Felipe and Klopf, Jonas and Schr{\"o}der, Niklas B. and Dewhurst, Rian D. and Braunschweig, Holger and Engel, Volker and Engels, Bernd}, title = {Twisting versus delocalization in CAAC- and NHC-stabilized boron-based biradicals: the roles of sterics and electronics}, series = {Chemistry - A European Journal}, volume = {27}, journal = {Chemistry - A European Journal}, number = {16}, doi = {10.1002/chem.202004619}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256636}, pages = {5160-5170}, year = {2021}, abstract = {Twisted boron-based biradicals featuring unsaturated C\(_2\)R\(_2\) (R=Et, Me) bridges and stabilization by cyclic (alkyl)(amino)carbenes (CAACs) were recently prepared. These species show remarkable geometrical and electronic differences with respect to their unbridged counterparts. Herein, a thorough computational investigation on the origin of their distinct electrostructural properties is performed. It is shown that steric effects are mostly responsible for the preference for twisted over planar structures. The ground-state multiplicity of the twisted structure is modulated by the σ framework of the bridge, and different R groups lead to distinct multiplicities. In line with the experimental data, a planar structure driven by delocalization effects is observed as global minimum for R=H. The synthetic elusiveness of C\(_2\)R\(_2\)-bridged systems featuring N-heterocyclic carbenes (NHCs) was also investigated. These results could contribute to the engineering of novel main group biradicals.}, language = {en} } @article{RestPhilipsDuennebackeetal.2020, author = {Rest, Christina and Philips, Divya Susan and D{\"u}nnebacke, Torsten and Sutar, Papri and Sampedro, Angel and Droste, J{\"o}rn and Stepanenko, Vladimir and Hansen, Michael Ryan and Albuquerque, Rodrigo Q. and Fern{\´a}ndez, Gustavo}, title = {Tuning Aqueous Supramolecular Polymerization by an Acid-Responsive Conformational Switch}, series = {Chemistry - A European Journal}, volume = {26}, journal = {Chemistry - A European Journal}, number = {44}, doi = {10.1002/chem.202001566}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-218118}, pages = {10005 -- 10013}, year = {2020}, abstract = {Besides their widespread use in coordination chemistry, 2,2'-bipyridines are known for their ability to undergo cis-trans conformational changes in response to metal ions and acids, which has been primarily investigated at the molecular level. However, the exploitation of such conformational switching in self-assembly has remained unexplored. In this work, the use of 2,2'-bipyridines as acid-responsive conformational switches to tune supramolecular polymerization processes has been demonstrated. To achieve this goal, we have designed a bipyridine-based linear bolaamphiphile, 1, that forms ordered supramolecular polymers in aqueous media through cooperative aromatic and hydrophobic interactions. Interestingly, addition of acid (TFA) induces the monoprotonation of the 2,2'-bipyridine moiety, leading to a switch in the molecular conformation from a linear (trans) to a V-shaped (cis) state. This increase in molecular distortion along with electrostatic repulsions of the positively charged bipyridine-H\(^{+}\) units attenuate the aggregation tendency and induce a transformation from long fibers to shorter thinner fibers. Our findings may contribute to opening up new directions in molecular switches and stimuli-responsive supramolecular materials.}, language = {en} } @phdthesis{Kullmann2013, author = {Kullmann, Martin Armin}, title = {Tracing Excited-State Photochemistry by Multidimensional Electronic Spectroscopy}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-81276}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2013}, abstract = {Light-induced excitation of matter proceeds within femtoseconds, resulting in excited states. Originating from these states chemical reaction mechanisms, like isomerization or bond formation, set in. Photophysical mechanisms like energy distribution and excitonic delocalization also occur. Thus, the reaction scheme has to be disentangled by assessing the importance of each process. Spectroscopic methods based on fs laser pulses have emerged as a versatile tool to study these reactions. Within this thesis time-resolved experiments with fs laser pulses on various molecular systems were performed. Novel photosystems, with possible applications ranging from ultrathin molecular wires to molecular switches, were extensively characterized. To resolve the complex kinetics of the investigated systems, time-resolved techniques had to be newly developed. By combining a visible excitation pulse pair with an additional pulse and a continuum probe electronic triggered-exchange two-dimensional spectroscopy (TE2D) was demonstrated for the first time. This goal was accomplished by combining a three-color transient-absorption setup with a pulse shaper. Hence, 2D spectroscopy with a continuum probe was also implemented. Using these methods two different molecular systems in solution were characterized in a comprehensive manner. (ZnTPP)2, a directly beta,beta'-linked Zn-metallated bisporphyrin, and a spiropyran-merocyanine photosystem, 6,8-dinitro BIPS, were characterized. (ZnTPP)2 is a homodimer, featuring strong excitonic effects. These manifest themselves in a twofold splitting of the Soret band (S2). 6,8-Dinitro BIPS exists in one of two possible conformations. The ring closed spiropyran absorbs only in the UV, while the ring open merocyanine also absorbs in the visible. For both molecular systems photodynamics upon illumination were monitored using transient-absorption. However, the obtained results were ambiguous, necessitating more complex methods. In the case of (ZnTPP)2 first the monomeric building block was characterized. There, population transfer from the S2 state into S1 within 2 ps was identified. Afterwards, intersystem crossing proceeds within 2 ns. For (ZnTPP)2 similar pathways were found, albeit the relaxation is faster. The intersystem crossing with 1.5 ns was not only indirectly deduced but directly measured by probing in the NIR spectral range. The excitonic influence of was investigated by coherent 2D spectroscopy in the Soret band. Population transfer within S2 was directly visualized on a time-scale of 100 fs. Calculation of the 2D spectra of a simple homodimer confirmed the results. After this analysis of the distinct excitonic character, this molecule may serve as a building block for larger porphyrin arrays with applications ranging from asymmetric catalysis over biomimicry of electron-transfer to organic optical devices. The second photosystem was the molecular switch 6,8-dinitro BIPS, existing in two conformations. Merocyanine is the more stable form in thermal equilibrium. Transient-absorption measurements uncovered that the sample consisted of a mixture of two merocyanine isomers, referred to as TTC and TTT. However, both isomers are capable of ring-closure forming spiropyran. The remaining excited molecules return to the ground state radiatively. Conducting 2D measurements utilizing a continuum probe the differing photochemistry of both isomers was examined in a single measurement. No isomerization between these conformations was detected. Therefore, 6,8-dinitro BIPS performs a concerted switching without long-living intermediates. This was confirmed by a pump-repump-probe scan. 6,8-DinitroBIPS can be closed by visible and opened by UV pulses using subsequent pulses and vice versa. These mechanisms via singlet pathways satisfy an important criterion for a unimolecular switching device. A second pump-repump-probe experiment showed that the sample is ionized, resulting in a merocyanine radical cation, when the first excited state is resonantly excited. Furthermore, by implementing TE2Dspectroscopy, it was elucidated that only TTC was ionized. Taking all this into account new techniques were developed and complex molecular systems were characterized within this thesis. Deeper insight into the photodynamics of (ZnTPP)2and 6,8-dinitro BIPS was gained by adapting transient absorption for the NIR spectral range, constructing a 2D setup in pump-probe geometry, and combining it with multipulse excitation to coherent TE2D. All techniques solved the questions for which they were constructed, but they are not limited to these cases. Especially TE2D opens new roads in photochemistry. By connecting reactant, product and the corresponding intermediates, a chemical reaction can be tracked through all stages, making unambiguous identification of the reactive states feasible. Thus, fundamental insight into the photochemistry of molecular compounds is gained.}, subject = {Femtosekundenspektroskopie}, language = {en} } @article{FalgeEngelGraefe2013, author = {Falge, M. and Engel, V. and Gr{\"a}fe, S.}, title = {Time-resolved photoelectron spectroscopy of coupled nuclear-electronic dynamics}, series = {EPJ Web of Conferences}, volume = {41}, journal = {EPJ Web of Conferences}, issn = {2100-014X}, doi = {10.1051/epjconf/20134102036}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-121812}, pages = {02036}, year = {2013}, abstract = {We study the effect of nuclear-electron coupling on time-resolved photo-electron spectra, employing a model system which allows to directly comparing spectra resulting from the adiabatic approximation with those obtained within a non-Born-Oppenheimer description.}, language = {en} } @article{SchleierReuschLummeletal.2019, author = {Schleier, Domenik and Reusch, Engelbert and Lummel, Lisa and Hemberger, Patrick and Fischer, Ingo}, title = {Threshold photoelectron spectroscopy of IO and IOH}, series = {ChemPhysChem}, volume = {20}, journal = {ChemPhysChem}, number = {19}, doi = {10.1002/cphc.201900813}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204751}, pages = {2413-2416}, year = {2019}, abstract = {Iodine oxides appear as reactive intermediates in atmospheric chemistry. Here, we investigate IO and HOI by mass-selective threshold photoelectron spectroscopy (ms-TPES), using synchrotron radiation. IO and HOI are generated by photolyzing iodine in the presence of ozone. For both molecules, accurate ionization energies are determined, 9.71±0.02 eV for IO and 9.79±0.02 eV for HOI. The strong spin-spin interaction in the 3Σ- ground state of IO+ leads to an energy splitting into the Ω=0 and Ω=±1 sublevels. Upon ionization, the I-O bond shortens significantly in both molecules; thus, a vibrational progression, assigned to the I-O stretch, is apparent in both spectra.}, language = {en} } @phdthesis{Issler2024, author = {Issler, Kevin}, title = {Theory and simulation of ultrafast autodetachment dynamics and nonradiative relaxation in molecules}, doi = {10.25972/OPUS-35223}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352232}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {In this thesis, theoretical approaches for the simulation of electron detachment processes in molecules following vibrational or electronic excitation are developed and applied. These approaches are based on the quantum-classical surface-hopping methodology, in which nuclear motion is treated classically as an ensemble of trajectories in the potential of quantum-mechanically described electronic degrees of freedom.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Baia2002, author = {Baia, Gheorghe Lucian}, title = {Theory and applications of confocal micro-Raman spectroscopy on hybrid polymer coatings and PDMS membranes and spectroscopic studies of doped B2O3-Bi2O3 glass systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-4606}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {The thesis consists of two major parts. The first part contains a theoretical-experimental study of confocal micro-Raman spectroscopy on hybrid polymer coatings and an application of this spectroscopic method on PDMS-membranes. The theoretical-experimental study includes the application of a model that describes the influence of the refraction effect on the focus length on confocal Raman experiments, and the development of a new model that additionally takes into account the effect of diffraction on the focus dimensions. A parallel comparison between these two theoretical approaches and experimental data has been also drawn and a better agreement between theory and experiment was observed, when both refraction and diffraction effects were considered. Further, confocal resonance micro-Raman spectroscopy has been applied to characterise the diffusion processes of pharmacologically relevant molecules (b-carotene dissolved in dimethylsulfoxide) through a polydimethylsiloxane (PDMS)-membrane. The diffusion rate as a function of the measurement depth and diffusion time as well as the concentration gradient under a steady flux have been determined. The measurements shown that the confocal micro-Raman technique is a powerful tool to investigate the kinetics of diffusion processes within a membrane before the steady state has been reached. The second part of the thesis contains infrared and Raman spectroscopic studies of copper and iron doped B2O3-Bi2O3 glass systems. These studies were performed to obtain specific data regarding their local structure and the role played by dopant ions on boron and bismuthate units. The changes of B2O3 and Bi2O3 structural units due to the relaxation of the amorphous structure, which was induced in these samples by the thermal treatment, were also evidenced.}, language = {en} } @phdthesis{Seibt2009, author = {Seibt, Joachim}, title = {Theoretical investigations on the spectroscopy of molecular aggregates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-37218}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {Die spektroskopischen Eigenschaften von Molek{\"u}laggregaten wurden mittels quantendynamischer Berechnungen untersucht. Hierbei wurden sowohl lineare als auch nichtlineare Spektroskopietechniken einbezogen. Zur Simulation von Absorptions- und CD-Spektroskopie wurden Kopplungseffekte sowie die relative Orientierung der Monomer-Einheiten in den Modellen ber{\"u}cksichtigt, um gemessene Spektren reproduzieren und so die entsprechenden Parameter zu bestimmen. Zur genaueren Beschreibung wurden auch Ergebnisse quantenchemischer Rechnungen verwendet. Dar{\"u}ber hinaus wurden Untersuchungen zur nichtlinearen optischen Spektroskopie an Dimeren durchgef{\"u}hrt.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Schmidt2015, author = {Schmidt, Thomas Christian}, title = {Theoretical Investigations on the Interactions of Small Compounds with their Molecular Environments}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-127860}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Im ersten Teil dieser Arbeit wird eine Kombination theoretischer Methoden f{\"u}r die strukturbasierte Entwicklung neuer Wirkstoffe pr{\"a}sentiert. Ausgehend von der Kristallstruktur eines kovalenten Komplexes einer Modellverbindung mit dem Zielprotein wurde mit Hilfe von quantenmechanischen und QM/MM Rechnungen die genaue Geometrie des vorausgehenden nicht-kovalenten Komplexes betimmt. Letztere ist der bestimmende Faktor f{\"u}r die Reaktivit{\"a}t des Inhibitors gegen{\"u}ber der katalytisch aktiven Aminos{\"a}ure und damit f{\"u}r die Ausbildung einer kovalenten Bindung. Aus diesem Grund wurde diese Geometrie auch f{\"u}r die Optimierung der Substitutionsmusters des Ihnibitors verwendet, um dessen Affinit{\"a}t zum Zielenzyme zu verbessern ohne dass dieser seine F{\"a}higkeit kovalent an das aktive Zentrum zu binden verliert. Die Optimierung des Substitutionsmuster wurde doch Methode des Molekularen Dockings unterst{\"u}tzt, das diese optimal dazu geeignet sind, Bindungsaffinit{\"a}ten vorherzusagen, die durch eine Modifikation der chemischen Struktur entstehen. Eine Auswahl der besten Strukturen wurde anschließend verwendet, um zu {\"u}berpr{\"u}fen, ob die ver{\"a}nderten Molek{\"u}le noch gen{\"u}gen Reaktivit{\"a}t gegen{\"u}ber dem Zielprotein aufweisen. Molek{\"u}ldynamik Simulationen der neuen Verbindungen haben jedoch gezeigt, dass die ver{\"a}nderten Verbindungen nur so and das Protein binden, dass die Bilung eine kovalenten Bindung zum Enzym nicht mehr m{\"o}glich ist. Daher wurden in einem weiteren Schritt die Modellverbindungen weiter modifiziert. Neben {\"A}nderungen im Substitutionsmuster wurde auch die chemische Struktur im Kern ver{\"a}ndert. Die Bindungsaffinit{\"a}ten wurde wieder mittels Docking {\"u}berpr{\"u}ft. F{\"u}r die besten Bindungsposen wurden wieder Simulationen zur Molek{\"u}ldynamik durchgef{\"u}hrt, wobei diesmal die Ausbildung einer kovalenten Bindung zum Enzyme m{\"o}glich erscheint. In einer abschließenden Serie von QM/MM Rechnungen unter Ber{\"u}cksichtigung verschiedener Protonierungszust{\"a}nde des Inhibitors und des Proteins konnten Reaktionspfade und zugeh{\"o}rige Reaktionsenergien bestimmt werden. Die Ergebnisse lassen darauf schließen, dass eines der neu entwickelten Molek{\"u}le sowohl eine stark verbesserte Bindungsaffinit{\"a}t wie auch die M{\"o}glichkeit der kovalenten Bindung an Enzyme aufweist. Der zweite Teil der Arbeit konzentriert sich auf die Umgebungseinfl{\"u}sse auf die Elektronenverteilung eines Inhibitormodells. Als Grundlage dient ein vinylsulfon-basiertes Moek{\"u}l, f{\"u}r das eine experimentell bestimmte Kristallstruktur sowie ein theoretisch berechneter Protein Komplex verf{\"u}gbar sind. Ein Referendatensatz f{\"u}r diese Systeme wurde erstellt, indem der Konformationsraum des Inhibitors nach m{\"o}glichen Minimumsstrukturen abgesucht wurde, welche sp{\"a}ter mit den Geometrien des Molek{\"u}ls im Kristall und im Protein verglichen werden konnten. The Geometrie in der Kristallumgebung konnte direkt aus den experimentellen Daten {\"u}bernommen werden. Rechnungen zum nicht-kovalenten Protein Komplex hingegen haben gezeigt, dass f{\"u}r das Modellsystem mehrere Geometrien des Inhibiors sowie zwei Protonierungszust{\"a}nde f{\"u}r die katalytisch aktiven Aminos{\"a}uren m{\"o}glich sind. F{\"u}r die Analyse wurden daher alle m{\"o}glichen Proteinkomplexe mit der Kristallstruktur verglichen. Ebenso wurden Vergleiche mit der Geometrie des isolierten Molek{\"u}ls im Vakuum sowie der Geometrie in w{\"a}ssriger L{\"o}sung angestellt. F{\"u}r die Geometrie des Molek{\"u}ls an sich ergab sich eine gute {\"U}bereinstimmung f{\"u}r alle Modellsysteme, f{\"u}r die Wechselwirkungen mit der Umgebung jedoch nicht. Die Ausbildung von Dimeren in der Kristallumgebung hat einen stark stablisierenden Effekt und ist einer der Gr{\"u}nde, warum dieser Kristall so gut wie keine Fehlordungen aufweist. In den Proteinkomplexen hingegen ergibt sich eine Abstoßung zwischen dem Inhibitor und einer der katalytisch aktiven Aminos{\"a}uren. Als Ursache f{\"u}r diese Abstoßung konnte die Einf{\"u}hrung der Methylaminfunktion ausgemacht werden. Vermutlicherweise f{\"u}hrt diese strukturelle {\"A}nderung auch dazu, dass der Modellinhibitor nicht in der Lage ist, so wie die Leitstruktur K11777 an das aktive Zentrum des Enzyms zu binden.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Welz2020, author = {Welz, Eileen}, title = {Theoretical Investigations on Inorganic, Boron-containing Biradicals with a unique Structure}, doi = {10.25972/OPUS-20259}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-202598}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {In this work, biradical boron containing systems with various structures are investigated to reveal the dependency of the biradical character on the ligated carbene (NHC, CAAC) and the related steric demands of the substituents.}, subject = {Biradical}, language = {en} } @phdthesis{Le2020, author = {Le, Thien Anh}, title = {Theoretical investigations of proton transfer and interactions or reactions of covalent and non-covalent inhibitors in different proteins}, doi = {10.25972/OPUS-17051}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-170511}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {Nowadays, computational-aided investigations become an essential part in the chemical, biochemical or pharmaceutical research. With increasing computing power, the calculation of larger biological systems becomes feasible. In this work molecular mechanical (MM) and quantum mechanical approaches (QM) and the combination of both (QM/MM) have been applied to study several questions which arose from different working groups. Thus, this work comprises eight different subjects which deals with chemical reactions or proton transfer in enzymes, conformational changes of ligands or proteins and verification of experimental data. This work firstly deals with reaction mechanisms of aromatic inhibitors of cysteine proteases which can be found in many organisms. These enzymes are responsible for various cancer or diseases as for example Human African Trypanosomiasis (HAT) or the Chagas disease. Aromatic SNAr-type electrophiles might offer a new possibility to covalently modify these proteases. Quantum mechanical calculations have been performed to gain insights into the energetics and possible mechanisms. The next chapter also deals with Trypanosomiasis but the focus was set on a different enzyme. The particularity of Trypanosomiasis is the thiol metabolism which can also be modified by covalent inhibitors. In this context, the wild type and point mutations of the enzyme tryparedoxin have been investigated via molecular dynamic (MD) simulations to examine the influence of specific amino acids in regard to the inhibitor. Experimental data showed that a dimerization of the enzyme occurs if the inhibitor is present. Simulations revealed that the stability of the dimer decreases in absence of the inhibitor and thus confirms these experiments. Further investigations concerning cysteine proteases such as cruzain and rhodesain have been conducted with respect to experimental kinetic data of covalent vinylsulfone inhibitors. Several approaches such as QM or QM/MM calculations and docking, MD or MMPBSA/MMGBSA simulations have been applied to reproduce these data. The utilization of force field approaches resulted in a qualitatively accurate prediction. The kinase AKT is involved in a range of diseases and plays an important role in the formation of cancer. Novel covalent-allosteric inhibitors have been developed and crystallized in complex with AKT. It was shown that depending on the inhibitor a different cysteine residue is modified. To investigate these differences in covalent modification computational simulations have been applied. Enoyl-(acyl carrier) (ENR) proteins are essential in the last step of the fatty acid biosynthesis II (FAS) and represent a good target for inhibition. The diphenylether inhibitor SKTS1 which was originally designed to target the ENR's of Staphylococcus aureus was also crystallized in InhA, the ENR of Mycobacterium tuberculosis (TB). Crystal structures indicate a change of the inhibitor's tautomeric form. This subject was investigated via MD simulations. Results of these simulations confirmed the tautomerization of the inhibitor. This work also deals with the development of a covalent inhibitor originating from a non-covalent ligand. The target FadA5 is an essential enzyme for the degradation of steroids in TB and is responsible for chronic tuberculosis. This enzyme was crystallized in complex with a non-covalent ligand which served as starting point for this study. Computations on QM or QM/MM level and docking and MD simulations have been applied to evaluate potential candidates. The next chapter focuses on the modification of the product spectrum of Bacillus megaterium levansucrase, a polymerase which catalyzes the biosynthesis of fructans. The covalent modification of the wild type or mutants of the enzyme lead to an accumulation of oligosaccharides but also to polymers with higher polymerization degree. To understand these changes in product spectra MD simulations have been performed. Finally, the proton transfer in catalytic cysteine histidine dyads was investigated. The focus was set on the influence of the relaxation of the protein environment to the reaction. Calculations of the enzymes FadA5 and rhodesain revealed that the preferred protonation state of the dyade depends on the protein environment and has an impact on the reaction barrier. Furthermore, the adaptation of the environment to a fixed protonation state was analyzed via MD simulations.}, subject = {Computational chemistry}, language = {en} } @article{HocheSchulzDietrichetal.2019, author = {Hoche, Joscha and Schulz, Alexander and Dietrich, Lysanne Monika and Humeniuk, Alexander and Stolte, Matthias and Schmidt, David and Brixner, Tobias and W{\"u}rthner, Frank and Mitric, Roland}, title = {The origin of the solvent dependence of fluorescence quantum yields in dipolar merocyanine dyes}, series = {Chemical Science}, volume = {10}, journal = {Chemical Science}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198707}, pages = {11013}, year = {2019}, abstract = {Fluorophores with high quantum yields are desired for a variety of applications. Optimization of promising chromophores requires an understanding of the non-radiative decay channels that compete with the emission of photons. We synthesized a new derivative of the famous laser dye 4-dicyanomethylen-2-methyl-6-p-dimethylaminostyryl-4H-pyran (DCM),i.e., merocyanine 4-(dicyanomethylene)-2-tert-butyl-6-[3-(3-butyl-benzothiazol-2-ylidene)1-propenyl]-4H-pyran (DCBT). We measured fluorescence lifetimes and quantum yields in a variety of solvents and found a trend opposite to the energy gap law.This motivated a theoretical investigation into the possible non-radiative decay channels. We propose that a barrier to a conical intersection exists that is very sensitive to the solvent polarity. The conical intersection is characterized by a twisted geometry which allows a subsequent photoisomerization. Transient absorption measurements confirmed the formation of a photoisomer in unpolar solvents, while the measurements of fluorescence quantum yields at low temperature demonstrated the existence of an activation energy barrier.}, language = {en} } @unpublished{HocheSchmittHumeniuketal.2017, author = {Hoche, Joscha and Schmitt, Hans-Christian and Humeniuk, Alexander and Fischer, Ingo and Mitrić, Roland and R{\"o}hr, Merle I. S.}, title = {The mechanism of excimer formation: an experimental and theoretical study on the pyrene dimer}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, doi = {10.1039/C7CP03990E}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159656}, year = {2017}, abstract = {The understanding of excimer formation in organic materials is of fundamental importance, since excimers profoundly influence their functional performance in applications such as light-harvesting, photovoltaics or organic electronics. We present a joint experimental and theoretical study of the ultrafast dynamics of excimer formation in the pyrene dimer in a supersonic jet, which is the archetype of an excimer forming system. We perform simulations of the nonadiabatic photodynamics in the frame of TDDFT that reveal two distinct excimer formation pathways in the gas-phase dimer. The first pathway involves local excited state relaxation close to the initial Franck-Condon geometry that is characterized by a strong excitation of the stacking coordinate exhibiting damped oscillations with a period of 350 fs that persist for several picoseconds. The second excimer forming pathway involves large amplitude oscillations along the parallel shift coordinate with a period of ≈900 fs that after intramolecular vibrational energy redistribution leads to the formation of a perfectly stacked dimer. The electronic relaxation within the excitonic manifold is mediated by the presence of intermolecular conical intersections formed between fully delocalized excitonic states. Such conical intersections may generally arise in stacked π-conjugated aggregates due to the interplay between the long-range and short-range electronic coupling. The simulations are supported by picosecond photoionization experiments in a supersonic jet that provide a time-constant for the excimer formation of around 6-7 ps, in good agreement with theory. Finally, in order to explore how the crystal environment influences the excimer formation dynamics we perform large scale QM/MM nonadiabatic dynamics simulations on a pyrene crystal in the framework of the long-range corrected tight-binding TDDFT. In contrast to the isolated dimer, the excimer formation in the crystal follows a single reaction pathway in which the initially excited parallel slip motion is strongly damped by the interaction with the surrounding molecules leading to the slow excimer stabilization on a picosecond time scale.}, language = {en} } @article{HocheSchmittHumeniuketal.2017, author = {Hoche, Joscha and Schmitt, Hans-Christian and Humeniuk, Alexander and Fischer, Ingo and Mitrić, Roland and R{\"o}hr, Merle I. S.}, title = {The mechanism of excimer formation: an experimental and theoretical study on the pyrene dimer}, series = {Physical Chemistry Chemical Physics}, volume = {19}, journal = {Physical Chemistry Chemical Physics}, number = {36}, doi = {10.1039/C7CP03990E}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159514}, pages = {25002-25015}, year = {2017}, abstract = {The understanding of excimer formation in organic materials is of fundamental importance, since excimers profoundly influence their functional performance in applications such as light-harvesting, photovoltaics or organic electronics. We present a joint experimental and theoretical study of the ultrafast dynamics of excimer formation in the pyrene dimer in a supersonic jet, which is the archetype of an excimer forming system. We perform simulations of the nonadiabatic photodynamics in the frame of TDDFT that reveal two distinct excimer formation pathways in the gas-phase dimer. The first pathway involves local excited state relaxation close to the initial Franck-Condon geometry that is characterized by a strong excitation of the stacking coordinate exhibiting damped oscillations with a period of 350 fs that persist for several picoseconds. The second excimer forming pathway involves large amplitude oscillations along the parallel shift coordinate with a period of ≈900 fs that after intramolecular vibrational energy redistribution leads to the formation of a perfectly stacked dimer. The electronic relaxation within the excitonic manifold is mediated by the presence of intermolecular conical intersections formed between fully delocalized excitonic states. Such conical intersections may generally arise in stacked π-conjugated aggregates due to the interplay between the long-range and short-range electronic coupling. The simulations are supported by picosecond photoionization experiments in a supersonic jet that provide a time-constant for the excimer formation of around 6-7 ps, in good agreement with theory. Finally, in order to explore how the crystal environment influences the excimer formation dynamics we perform large scale QM/MM nonadiabatic dynamics simulations on a pyrene crystal in the framework of the long-range corrected tight-binding TDDFT. In contrast to the isolated dimer, the excimer formation in the crystal follows a single reaction pathway in which the initially excited parallel slip motion is strongly damped by the interaction with the surrounding molecules leading to the slow excimer stabilization on a picosecond time scale.}, language = {en} } @phdthesis{Hoche2023, author = {Hoche, Joscha}, title = {The life of an exciton: From ultrafast nonradiative relaxation to high quantum yield fluorescence}, doi = {10.25972/OPUS-31684}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-316844}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {This thesis focuses on understanding and predicting processes in chromophores after electronic state excitation, particularly the impact on luminescence - the spontaneous emission of light. It considers the effect of processes preceding luminescence on emission properties, which are challenging to predict, especially in complex aggregates. For example, excitation energy transfer is a crucial process in understanding luminescence, as it allows the emission to occur from different molecular units than where the absorption occurs. This can lead to significant shifts in emission wavelength and fluorescence quantum yields. The thesis offers solutions to model this process effectively, understanding the impact of excitation energy and exciton coupling disorder on energy transfer rates and linking simulated energy transfer to experimental measurements. The work further explores excimer formation - an undesired luminescence loss channel due to its significant stabilization of the electronic state. Usually, the molecules obey a stacked conformation with parallel orientation to maximize the orbital overlap. This energetic lowering of the excited state can often result in trapping of the dimer in this state due to a deep minimum on the potential energy surface. The excimer formation dynamics, structural rearrangement, and its influence on singlet-correlated triplet pair states formation, critical for the singlet-fission process, have been extensively studied. The thesis also focuses on another luminescence loss channel triggered by conical intersections between the electronic ground and the first excited states. A new model is introduced to overcome limitations in current simulation methods, considering the solvent's electrostatic and frictional effects on the barriers. The model accurately describes merocyanine dyes' solvent-dependent photoluminescence quantum yields and characterizes all relaxation channels in different BODIPY oligomer series.}, subject = {Theoretische Chemie}, language = {en} } @phdthesis{Szeghalmi2005, author = {Szeghalmi, Adriana Viorica}, title = {The ground and excited state molecular structure of model systems undergoing photochemical processes and the characterization of active agents by means of vibrational spectroscopy and theoretical calculations}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-11961}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {The present thesis reports about vibrational and quantum chemical investigations on model systems undergoing photochemical processes and pharmaceutically active compounds, respectively. Infrared (IR) and Raman spectroscopy were applied for the characterization of the ground state molecular structure. Moreover, resonance Raman (RR) spectra contain additional information about the resonantly enhanced excited state molecular structure. A quantitative resonance Raman intensity analysis in conjunction with the simultaneous simulation of the absorption spectra by means of time-dependent propagation methods was accomplished in order to extract valuable information about the excited state molecular structures of the investigated systems. Surface enhanced Raman scattering (SERS) allows one to determine the interaction and adsorption site of active agents on a metal substrate. Furthermore, density functional theory (DFT) and potential energy distribution (PED) calculations were carried out for an exact assignment of the vibrational spectra. Complete active space self consistent field (CASSCF) and configuration interaction (CI) calculations for some model systems were also performed to assess the experimental results on the excited state potential surfaces. The fundamentals of resonance Raman spectroscopy are treated in detail, describing the physical processes and emphasizing the theoretical methodologies which allow one to obtain the information about the resonantly excited state via an RR intensity analysis. The Brownian oscillator model to determine the solvent reorganization energy is briefly presented. Furthermore, the SERS enhancement mechanisms and selection rules to determine the orientation of the molecules adsorbed on the metal substrate are discussed. The Hartree-Fock approach to calculate the ground state geometry is expatiated, and the basic characteristics of the CI and CASSCF calculations are specified. The chapter ends with a short description of the DFT calculations. Chapter 4 deals with the investigation of the excited state intramolecular proton transfer of the model system, 1-hydroxy-2-acetonaphthone (HAN). The vibrations showing the highest displacement parameters correspond to stretching and in-plane deformation modes of the naphthalene ring and the conjugated carbonyl group, while the OH stretching mode exhibits no observable enhancement. The cooperative effect of the skeletal vibrations reduces the distance between the carbonyl and hydroxyl oxygen atoms in accordance with a general electron density redistribution. Hence, the leading force in the proton transfer process is the increase in electron density on the carbonyl group and the decrease of the negative charge on the hydroxyl oxygen. In chapter 5 the structural and vibrational characteristics of the organic mixed valence system N,N,N',N'-tetraphenylphenylenediamine radical cation (1+) are discussed. The resonance Raman measurements showed that at least eight vibrational modes are strongly coupled to the optical charge transfer process in (1+). These Franck-Condon active modes were assigned to symmetric vibrations. The most enhanced band corresponds to the symmetric stretching mode along the N-phenylene-N unit and exhibits the largest vibrational reorganization energy. Nevertheless, symmetric stretching modes of the phenylene and phenyl units as well as deformation modes are also coupled to the electronic process. The total vibrational reorganization energy of these symmetrical modes is dominant, while the solvent induced broadening and reorganization energy are found to be small. Hence, (1+) adopts a symmetrical delocalized Robin-Day Class III structure in the ground state. Chapter 6 reports about a vibrational spectroscopic investigation of a model organic photorefractive thiophene derivative, 2-(N,N-diethylamino)-5-(2',2'-dicyanovinyl)-thiophene. The geometry of the first excited state were optimized and the FC parameters were calculated using the configuration interaction with single excitations method. These calculations show that the contribution of the zwitterionic structure to the excited state is significantly higher than in the ground state. The resonance Raman spectra indicate that several stretching modes along the bonds connecting the donor and acceptor moieties as well as the S-C stretching vibrations are enhanced. Chapter 7 presents the vibrational analysis of an aziridinyl tripeptide, a cysteine protease inhibitor active drug. The vibrational analysis reveals stronger H-bonding of the aziridine NH unit in the solid state of the aziridinyl tripeptide than in the liquid electrophilic building block, indicating medium strong intermolecular H-bond interactions in the crystal unit. The amide hydrogen atoms of the aziridinyl tripeptide are involved in weaker H-bonds than in an epoxide analogon. Furthermore, the characteristic vibrational modes of the peptide backbone were discussed. Chapter 8 reports on the adsorption mechanism of two related anti-leukemia active agents, 6-mercaptopurine (6MP) and 6-mercaptopurine-ribose (6MPR) on a silver colloid. Both molecules adsorb through the N1 and possibly S atom on the metal surface under basic conditions. The SERS spectra recorded for acidic pH values showed that the ribose derivative exhibits a different adsorption behavior compared to the free base. 6MP probably adsorbs on the silver sol through the N9 and N3 atoms, while 6MPR interacts with the surface via the N7 and probably S atoms. Around critical biological concentrations and pH values i.e. at low concentrations and almost neutral condition (pH 7-9), 6MPR interacts with the substrate through both N7 and N1 atoms, possibly forming two differently adsorbed species, while for 6MP only the species adsorbed via N1 was evidenced.}, subject = {Photochemie}, language = {en} } @phdthesis{Brueckner2017, author = {Br{\"u}ckner, Charlotte}, title = {The Electronic Structure and Optoelectronic Processes at the Interfaces in Organic Solar Cells Composed of Small Organic Molecules - A Computational Analysis of Molecular, Intermolecular, and Aggregate Aspects}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141652}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {Describing the light-to-energy conversion in OSCs requires a multiscale understanding of the involved optoelectronic processes, i.e., an understanding from the molecular, intermolecular, and aggregate perspective. This thesis presents such a multiscale description to provide insight into the processes in the vicinity of the organic::organic interface, which are crucial for the overall performance of OSCs. Light absorption, exciton diffusion, photoinduced charge transfer at the donor-acceptor interface, and charge separation are included. In order to establish structure-property relationships, a variety of different molecular p-type semiconductors are combined at the organic donor-acceptor heterojunction with fullerene C60, one of the most common acceptors in OSCs. Starting with a comprehensive analysis of the accuracy of diverse ab initio, DFT, and semiempiric methods for the properties of the individual molecules, the intermolecular, and aggregate/device stage are subsequently addressed. At all stages, both methodological concepts and physical aspects in OSCs are discussed to extend the microscopic understanding of the charge generation processes.}, subject = {Benchmark}, language = {en} } @article{RamlerFantuzziGeistetal.2021, author = {Ramler, Jaqueline and Fantuzzi, Felipe and Geist, Felix and Hanft, Anna and Braunschweig, Holger and Engels, Bernd and Lichtenberg, Crispin}, title = {The dimethylbismuth cation: entry into dative Bi-Bi bonding and unconventional methyl exchange}, series = {Angewandte Chemie International Edition}, volume = {60}, journal = {Angewandte Chemie International Edition}, doi = {10.1002/anie.202109545}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256543}, pages = {24388-24394}, year = {2021}, abstract = {The dimethyl bismuth cation, [BiMe\(_2\)(SbF\(_6\))], has been isolated and characterized. Reaction with BiMe\(_3\) allows access to the first compound featuring Bi→Bi donor-acceptor bonding. In solution, dynamic behavior with methyl exchange via an unusual S\(_E\)2 mechanism is observed, underlining the unique properties of bismuth species as soft Lewis acids with the ability to undergo reversible Bi-C bond cleavage.}, language = {en} } @article{MuessigLisinetskayaDewhurstetal.2020, author = {Muessig, Jonas H. and Lisinetskaya, Polina and Dewhurst, Rian D. and Bertermann, R{\"u}diger and Thaler, Melanie and Mitric, Roland and Braunschweig, Holger}, title = {Tetraiododiborane(4) (B\(_2\)I\(_4\)) is a Polymer based on sp\(^3\) Boron in the Solid State}, series = {Angewandte Chemie International Edition}, volume = {59}, journal = {Angewandte Chemie International Edition}, doi = {10.1002/anie.201913590}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-209428}, pages = {5531-5535}, year = {2020}, abstract = {Herein we present the first solid-state structures of tetraiododiborane(4) (B\(_2\)I\(_4\)), which was long believed to exist in all phases as discrete molecules with planar, tricoordinate boron atoms, like the lighter tetrahalodiboranes(4) B\(_2\)F\(_4\), B\(_2\)Cl\(_4\), and B\(_2\)Br\(_4\). Single-crystal X-ray diffraction, solid-state NMR, and IR measurements indicate that B\(_2\)I\(_4\) in fact exists as two different polymeric forms in the solid state, both of which feature boron atoms in tetrahedral environments. DFT calculations are used to simulate the IR spectra of the solution and solid-state structures, and these are compared with the experimental spectra.}, language = {en} } @phdthesis{Maksimenka2005, author = {Maksimenka, Raman}, title = {Techniques in frequency conversion and time-resolved spectroscopy with nonlinear optical processes in the femtosecond regime}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-14087}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {Nichtlineare Frequenzumsetzung der niederenergetischen femtosekunden Laserpulsen wurde in den Festk{\"o}rpermitteln nachgeforscht. Ramanumwandlung im weiss-Licht-freien Regime des impulsiven stimulierten Raman Streuungs wurde erzielt, indem man KGW-Kristall mit den Bessel-Lichtstrahl pumpte. Leistungs-f{\"a}higes Superkontinuumerzeugung wurde f{\"u}r die sub-microjule Pulse demonstriert, die in Mikrostrukturfaser fokussiert wurden. Anwendung von Vier-Wellen-Mischung Techniken zur {\"U}berwachung der Aufregenzustandsdynamik in den mehratomigen Molek{\"u}len wurde demonstriert. Zeitkonstanten der Prozesse, die auf Schwingungsenergiewiederverteilung nach dem ursprunglichen Photoanregung von Stilben-3 bezogen wurden, wurden mittels der Pump-CARS Technik festgestellt, in der CARS-Prozess als wirkungsvoller Modus-vorgew{\"a}hlter Filter diente. Spektrale sowie zeitliche Eigenschaften der elektronischen Entspannungbahnen in den Azulenderivats wurden erforscht, indem man verg{\"a}nglichen-Bev{\"o}lkerungs-Gittern und Pump-Probe verg{\"a}nglichen Absorptions Techniken verwendete.}, subject = {Frequenzumsetzung}, language = {en} } @article{FranzsicoFantuzziCardozoetal.2021, author = {Franzsico, Marcos A. S. and Fantuzzi, Felipe and Cardozo, Thiago M. and Esteves, Pierre M. and Engels, Bernd and Oliveira, Ricardo R.}, title = {Taming the Antiferromagnetic Beast: Computational Design of Ultrashort Mn-Mn Bonds Stabilized by N-Heterocyclic Carbenes}, series = {Chemistry—A European Journal}, volume = {27}, journal = {Chemistry—A European Journal}, number = {47}, doi = {10.1002/chem.202101116}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256874}, pages = {12126-12136}, year = {2021}, abstract = {The development of complexes featuring low-valent, multiply bonded metal centers is an exciting field with several potential applications. In this work, we describe the design principles and extensive computational investigation of new organometallic platforms featuring the elusive manganese-manganese bond stabilized by experimentally realized N-heterocyclic carbenes (NHCs). By using DFT computations benchmarked against multireference calculations, as well as MO- and VB-based bonding analyses, we could disentangle the various electronic and structural effects contributing to the thermodynamic and kinetic stability, as well as the experimental feasibility, of the systems. In particular, we explored the nature of the metal-carbene interaction and the role of the ancillary η\(^{6}\) coordination to the generation of Mn\(_{2}\) systems featuring ultrashort metal-metal bonds, closed-shell singlet multiplicities, and positive adiabatic singlet-triplet gaps. Our analysis identifies two distinct classes of viable synthetic targets, whose electrostructural properties are thoroughly investigated.}, language = {en} } @article{AhmedOjhaHirschetal.2017, author = {Ahmed, Bilal and Ojha, Animesh K. and Hirsch, Florian and Fischer, Ingo and Patrice, Donfack and Materny, Arnulf}, title = {Tailoring of enhanced interfacial polarization in WO\(_3\) nanorods grown over reduced graphene oxide synthesized by a one-step hydrothermal method}, series = {RSC Advances}, volume = {7}, journal = {RSC Advances}, number = {23}, doi = {10.1039/c7ra00730b}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-181829}, pages = {13985-13996}, year = {2017}, abstract = {In the present report, well-defined WO3 nanorods (NRs) and a rGO-WO\(_3\) composite were successfully synthesized using a one-pot hydrothermal method. The crystal phase, structural morphology, shape, and size of the as-synthesized samples were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements. The optical properties of the synthesized samples were investigated by Raman, ultraviolet-visible (UV-Vis) and photoluminescence (PL) spectroscopy. Raman spectroscopy and TEM results validate the formation of WO\(_3\) (NRs) on the rGO sheet. The value of the dielectric constant (ε′) of WO3 NRs and rGO-WO\(_3\) composite is decreased with an increase in frequency. At low frequency (2.5 to 3.5 Hz), the value of ε′ for the rGO-WO3 composite is greater than that of pure WO\(_3\) NRs. This could be due to the fact that the induced charges follow the ac signal. However, at higher frequency (3.4 to 6.0), the value of ε′ for the rGO-WO\(_3\) composite is less compared to that of the pure WO3 NRs. The overall decrease in the value of ε′ could be due to the occurrence of a polarization process at the interface of the rGO sheet and WO3 NRs. Enhanced interfacial polarization in the rGO-WO\(_3\) composite is observed, which may be attributed to the presence of polar functional groups on the rGO sheet. These functional groups trap charge carriers at the interface, resulting in an enhancement of the interfacial polarization. The value of the dielectric modulus is also calculated to further confirm this enhancement. The values of the ac conductivity of the WO\(_3\) NRs and rGO-WO\(_3\) composite were calculated as a function of the frequency. The greater value of the ac conductivity in the rGO-WO\(_3\) composite compared to that of the WO\(_3\) NRs confirms the restoration of the sp:\(^{++}\) network during the in situ synthesis of the rGO-WO\(_3\) composite, which is well supported by the results obtained by Raman spectroscopy.}, language = {en} } @article{OjhaForsterKumaretal.2013, author = {Ojha, Animesh K. and Forster, Stefan and Kumar, Sumeet and Vats, Siddharth and Negi, Sangeeta and Fischer, Ingo}, title = {Synthesis of well-dispersed silver nanorods of different aspect ratios and their antimicrobial properties against gram positive and negative bacterial strains}, series = {Journal of Nanobiotechnology}, volume = {11}, journal = {Journal of Nanobiotechnology}, number = {42}, doi = {10.1186/1477-3155-11-42}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-132222}, year = {2013}, abstract = {In the present contribution, we describe the synthesis of highly dispersed silver nanorods (NRs) of different aspect ratios using a chemical route. The shape and size of the synthesized NRs were characterized by Transmission Electron Microscopy (TEM) and UV-visible spectroscopy. Longitudinal and transverse absorptions bands confirm the rod type structure. The experimentally recorded UV-visible spectra of NRs solutions were fitted by using an expression of the extinction coefficient for rod like nano structures under the dipole approximation. Simulated and experimentally observed UV-visible spectra were compared to determine the aspect ratios (R) of NRs. The average values of R for NR1, NR2 and NR3 solutions are estimated to be 3.0 ± 0.1, 1.8 ± 0.1 and 1.2 ± 0.1, respectively. These values are in good agreement with those obtained by TEM micrographs. The silver NRs of known aspect ratios are used to study antimicrobial activities against B. subtilis (gram positive) and E. coli (gram negative) microbes. We observed that the NRs of intermediate aspect ratio (R = 1.8) have greater antimicrobial effect against both, B. subtilis (gram positive) and E. coli (gram negative). The NRs of aspect ratio, R = 3.0 has better antimicrobial activities against gram positive than on the gram negative.}, language = {en} } @article{OjhaForsterKumaretal.2013, author = {Ojha, Animesh K. and Forster, Stefan and Kumar, Sumeet and Vats, Siddharth and Negi, Segeeta and Fischer, Ingo}, title = {Synthesis of well-dispersed silver nanorods of different aspect ratios and their antimicrobial properties against gram positive and negative bacterial strains}, series = {Journal of Nanobiotechnology}, volume = {11}, journal = {Journal of Nanobiotechnology}, number = {42}, issn = {1477-3155}, doi = {10.1186/1477-3155-11-42}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-122837}, year = {2013}, abstract = {In the present contribution, we describe the synthesis of highly dispersed silver nanorods (NRs) of different aspect ratios using a chemical route. The shape and size of the synthesized NRs were characterized by Transmission Electron Microscopy (TEM) and UV-visible spectroscopy. Longitudinal and transverse absorptions bands confirm the rod type structure. The experimentally recorded UV-visible spectra of NRs solutions were fitted by using an expression of the extinction coefficient for rod like nano structures under the dipole approximation. Simulated and experimentally observed UV-visible spectra were compared to determine the aspect ratios (R) of NRs. The average values of R for NR1, NR2 and NR3 solutions are estimated to be 3.0 +/- 0.1, 1.8 +/- 0.1 and 1.2 +/- 0.1, respectively. These values are in good agreement with those obtained by TEM micrographs. The silver NRs of known aspect ratios are used to study antimicrobial activities against B. subtilis (gram positive) and E. coli (gram negative) microbes. We observed that the NRs of intermediate aspect ratio (R = 1.8) have greater antimicrobial effect against both, B. subtilis (gram positive) and E. coli (gram negative). The NRs of aspect ratio, R = 3.0 has better antimicrobial activities against gram positive than on the gram negative.}, language = {en} } @article{ReisererHuangHechtetal.2010, author = {Reiserer, Andreas A. and Huang, Jer-Shing and Hecht, Bert and Brixner, Tobias}, title = {Subwavelength broadband splitters and switches for femtosecond plasmonic signals}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85889}, year = {2010}, abstract = {Numerical simulations and an analytic approach based on transmission line theory are used to design splitters for nano-plasmonic signal processing that allow to arbitrarily adjust the ratio of transmission from an input into two different output arms. By adjusting the geometrical parameters of the structure, either a high bandwidth or a sharp transmission resonance is obtained. Switching between the two arms can be achieved by modulating the effective refractive index of the waveguide. Employing the instantaneous Kerr effect, switching rates in the THz regime are potentially feasible. The suggested devices are of interest for future applications in nanoplasmonic information processing.}, language = {en} } @phdthesis{Matthaei2023, author = {Matthaei, Christian Tobias}, title = {Studying the Photodissociation of Chlorine-Containing Molecules with Velocity Map Imaging}, doi = {10.25972/OPUS-32740}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-327405}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The first is via direct dissociation and the second likely involves a barrier slowing down dissociation. Chlorine-containing hydrocarbons pose a great risk for the environment and especially for the atmosphere. In this thesis I present the photodissociation dynamics of multiple chlorine-containing molecules. The method of velocity map imaging was utilized for gaining information on the kinetic energy distribution of the fragments generated in the photodissociation reactions. First, the photodissociation of benzoyl chloride after excitation to the S1, S2 and the S3 state between 279 nm and 237 nm was studied. This stable molecule was an ideal candidate for demonstrating a new ionization scheme for chlorine atoms. It was shown that benzoyl chloride dissociates statistically from the ground state. Afterwards, the results from experiments on the radicals trichloromethyl and dichlorocarbene are presented in the range of 230 to 250 nm. These radicals remain after the dissociation of carbon tetrachloride and have not been studied in detail because of their instability. Trichlormethyl dissociates via two paths: The loss of a chlorine atom to dichlorocarbene and by decaying to CCl and a chlorine molecule. The dissociation to dichlorocarbene involves a barrier. If the photon exciting the molecule has enough energy to surpass the barrier, which is the case starting at around 235 nm, trichlormethyl dissociates rapidly resulting in an anisotropic VMI. However, if the the excitation energy is lower, the dissociation takes longer than a rotational period and the anisotropy is lost.The path to CCl is a statistical dissociation. Dichlorocarbene dissociates to CCl and Cl via to separate channels. The first is via direct dissociation and the second likely involves a barrier slowing down dissociation.}, subject = {Photodissoziation}, language = {en} } @phdthesis{Moigno2001, author = {Moigno, Damien}, title = {Study of the ligand effects on the metal-ligand bond in some new organometallic complexes using FT-Raman and -IR spectroscopy, isotopic substitution and density functional theory techniques}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-3101}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2001}, abstract = {The present studies which have been performed in the work-group C-2 (Prof. W. Kiefer) within the program of the Sonderforschungsbereichs 347, deal with the FT-Raman and -IR spectroscopy on new organometallic complexes, synthesized in the work-groups B-2 (Prof. W. Malisch), B-3 (Prof. W. A. Schenk), D-1 (Prof. H. Werner) and D-4 (Prof. D. Stalke). The FT-Raman spectra recorded at 1064 nm led to very useful and interesting information. Furthermore, the DFT calculations which are known to offer promise of obtaining accurate vibrational wavenumbers, were successfully used for the assignment of the vibrational spectra. For the first time it has been possible to ascribe exactly the n(RhC) stretching mode in the vinylidene rhodium(I) complex trans-[RhF(=C=CH2)(PiPr3)2] by using isotopic substitution, in conjunction with theoretical calculations. This is also true for the complexes trans-[RhF(CO)(PiPr3)2], trans-[RhF(C2H4)(PiPr3)2], trans-[RhX(=C=CHPh)(PiPr3)2] (X = F, Cl, Br, I, Me, PhCºC) and trans-[RhX(CN-2,6-xylyl)(PiPr3)2] (X = F, Cl, Br, I, CºCPh). In addition, the comparison between the n(RhC) wavenumbers of the complexes trans-[RhF(=13C=13CH2)(PiPr3)2] and trans-[RhF(CO)(PiPr3)2], containing the isoelectronic ligands 13C=13CH2 and CO, which have the same reduced mass, indicated that the Rh-C bond is stronger in the carbonyl than in the vinylidene complex. Besides, the n(RhF) stretching mode, which has been observed at higher wavenumbers in the FT-Raman and -IR spectra of trans-[RhF(CO)(PiPr3)2], showed that the carbonyl ligand is a better p-acceptor and a less effective s-donor than the vinylidene one. Moreover, the comparison of the n(CºC) and n(Rh-C) modes from the FT-Raman spectrum of the complexes trans-[Rh(CºCPh)(L)(PiPr3)2] (L = C=CHPh, CO, CN-2,6-xylyl) point out that the p-acceptor ability of the ligand trans to CºCPh should rise in the order C=CH2 < CO < CN-2,6-xylyl \pounds C=CHPh. The investigated sensitivity of the n(RhC), n(CC), n(CO) and n(CN) vibrational modes to the electronic modifications occuring in the vinylidene, carbonyl, ethylene and isonitrile complexes, should allow in the future the examination of the p-acceptor or p-donor properties of further ligands. Likewise, we were able to characterize the influence of various X ligands on the RhC bond by using the n(RhC) stretching mode as a probe for the weakening of this. The calculated wavenumbers of the n(RhC) for the vinylidene complexes trans-[RhX(=C=CHR)(PiPr3)2], where R = H or Ph, suggested that the strength of the Rh=C bond increases along the sequence X = CºCPh < CH3 < I < Br < Cl < F. For the series of carbonyl compounds trans-[RhX(CO)(PiPr3)2], where X = F, Cl, Br and I, analogous results have been obtained and confirmed from the model compounds trans-[RhX(CO)(PMe3)2]. Since, the calculated vibrational modes for the ethylene complex trans-[RhF(C2H4)(PiPr3)2] were in good agreement with the experimental results and supported the description of this complex as a metallacyclopropane, we were interested in getting more information upon this class of compounds. In this context, we have recorded the FT-Raman and -IR spectra of the thioaldehyde complexes mer-[W(CO)3(dmpe)(h2-S=CH2)] and mer-[W(CO)3(dmpe)(h2-S=CD2)] which have been synthezised by B-3. The positions of the different WL vibrational modes anticipated by the DFT calculations, were consistent with the experimental results. Indeed, the analysis of the band shifts in the FT-Raman and -IR spectra of the isotopomer mer-[W(CO)3(dmpe)(h2-S=CD2)] confirmed our assignment. The different stereoisomers of complex mer-[W(CO)3(dmpe)(h2-S=CH2)] were investigated too, since RMN and IR-data have shown that complex mer-[W(CO)3(dmpe)(h2-S=CH2)] lead in solution to an equilibrium. Since the information on the vibrational spectra of the molybdenum and tungsten complexes Cp(CO)2M-PR2-X (M = Mo, W; R = Me, tBu, Ph; X = S, Se) is very scarce, we extended our research work to this class of compounds. We have tried to elucidate the bonding properties in these chalcogenoheterocycle complexes by taking advantage of the mass effect on the different metal atoms (W vs. Mo). Thus, the observed band shifts allowed to assign most of the ML fundamental modes of these complexes. This project and the following one were a cooperation within the work-group B-2. The Raman and IR spectra of the matrix isolated photoproducts expected by the UV irradiation of the iron silyl complex Cp(CO)2FeSiH2CH3 have been already reported by Claudia Fickert and Volker Nagel in their PhD-thesis. Since no exact assignment was feasible for these spectra, we were interested in the study of the reaction products created by irradiation of the carbonyl iron silyl complex Cp(CO)2FeCH2SiH3. Although the calculated characteristic vibrational modes of the metal ligand unit for the various photoproducts are significantly different in constitution, they are very similar in wavenumbers, which did not simplify their identification. However, the theoretical results have been found to be consistent with the earlier experimental results. Finally, the last part of this thesis has been devoted to the (2-Py)2E- anions which exhibit a high selectivity toward metal-coordination. All di(2-pyridyl) amides and -phosphides which were synthesized by D-4, coordinate the R2Al+ fragment via both ring nitrogen atoms. This already suggests that the charge density in the anions is coupled into the rings and accumulated at the ring nitrogen atoms, but the Lewis basicity of the central nitrogen atom in Et2Al(2-Py)2N is still high enough to coordinate a second equivalent AlEt3 to form the Lewis acid base adduct Et2Al(2-Py)2NAlEt3. Due to the higher electronegativity of the central nitrogen atom in Me2Al(2-Py)2N, Et2Al(2-Py)2N and Et2Al(2-Py)2NAlEt3, compared to the bridging two coordinated phosphorus atom in Me2Al(2-Py)2P and Et2Al(2-Py)2P, the di(2-pyridyl)amide is the hardest Lewis base. In the phosphides merely all charge density couples into the rings leaving the central phosphorus atom only attractive for soft metals. These results were confirmed by using DFT and MP2 calculations. Moreover, a similar behaviour has been observed and described for the benzothiazolyl complex [Me2Al{Py(Bth)P}], where complementary investigations are to be continued. The DFT calculations carried out on the model compounds analysed in these studies supply very accurate wavenumbers and molecular geometries, these being in excellent agreement with the experimental results obtained from the corresponding isolated complexes.}, subject = {{\"U}bergangsmetallkomplexe}, language = {en} } @phdthesis{Koch2016, author = {Koch, Federico Juan}, title = {Structure-Dependent Ultrafast Relaxation Dynamics in Multichromophoric Systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136306}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {Time-resolved spectroscopy allows for analyzing light-induced energy conversion and chromophore-chromophore interactions in molecular systems, which is a prerequisite in the design of new materials and for improving the efficiency of opto-electronic devices. To elucidate photo-induced dynamics of complex molecular systems, transient absorption (TA) and coherent two-dimensional (2D) spectroscopy were employed and combined with additional experimental techniques, theoretical approaches, and simulation models in this work. A systematic series of merocyanines, synthetically varied in the number of chromophores and subsitution pattern, attached to a benzene unit was investigated in cooperation with the group of Prof. Dr. Frank W{\"u}rthner at the University of W{\"u}rzburg. The global analysis of several TA experiments, and additional coherent 2D spectroscopy experiments, provided the basis to elaborate a relaxation scheme which was applicable for all merocyanine systems under investigation. This relaxation scheme is based on a double minimum on the excited-state potential energy surface. One of these minima is assigned to an intramolecular charge-transfer state which is stabilized in the bis- and tris-chromophoric dyes by chromphore-chromophore interactions, resulting in an increase in excited-state lifetime. Electro-optical absorption and density functional theory (DFT) calculations revealed a preferential chromophore orientation which compensates most of the dipole moment of the individual chromophores. Based on this structural assignment the conformationdependent exciton energy splitting was calculated. The linear absorption spectra of the multi-chromophoric merocyanines could be described by a combination of monomeric and excitonic spectra. Subsequently, a structurally complex polymeric squaraine dye was studied in collaboration with the research groups of Prof. Dr. Christoph Lambert and Prof. Dr. Roland Mitric at the University of W{\"u}rzburg. This polymer consists of a superposition of zigzag and helix structures depending on the solvent. High-level DFT calculations confirmed the previous assignment that zigzag and helix structures can be treated as J- and H-aggregates, respectively. TA experiments revealed that in dependence on the solvent as well as the excitation energy, ultrafast energy transfer within the squaraine polymer proceeds from initially excited helix segments to zigzag segments or vice versa. Additionally, 2D spectroscopy confirmed the observed sub-picosecond dynamics. In contrast to other conjugated polymers such as MEH-PPV, which is investigated in the last chapter, ultrafast energy transfer in squaraine polymers is based on the matching of the density of states between donor and acceptor segments due to the small reorganization energy in cyanine-like chromophores. Finally, the photo-induced dynamics of the aggregated phase of the conjugated polymer MEH-PPV was investigated in cooperation with the group of Prof. Dr. Anna K{\"o}hler at the University of Bayreuth. Our collaborators had previously described the aggregation of MEH-PPV upon cooling by the formation of so-called HJ-aggregates based on exciton theory. By TA measurements and by making use of an affiliated band analysis distinct relaxation processes in the excited state and to the ground state were discriminated. By employing 2D spectroscopy the energy transfer between different conjugated segments within the aggregated polymer was resolved. The initial exciton relaxation within the aggregated phase indicates a low exciton mobility, in contrast to the subsequent energy transfer between different chromophores within several picoseconds. This work contributes by its systematic study of structure-dependent relaxation dynamics to the basic understanding of the structure-function relationship within complex molecular systems. The investigated molecular classes display a high potential to increase efficiencies of opto-electronic devices, e.g., organic solar cells, by the selective choice of the molecular morphology.}, subject = {Femtosekundenspektroskopie}, language = {en} } @article{WeiserCuiDewhurstetal.2023, author = {Weiser, Jonas and Cui, Jingjing and Dewhurst, Rian D. and Braunschweig, Holger and Engels, Bernd and Fantuzzi, Felipe}, title = {Structure and bonding of proximity-enforced main-group dimers stabilized by a rigid naphthyridine diimine ligand}, series = {Journal of Computational Chemistry}, volume = {44}, journal = {Journal of Computational Chemistry}, number = {3}, doi = {10.1002/jcc.26994}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-312586}, pages = {456 -- 467}, year = {2023}, abstract = {The development of ligands capable of effectively stabilizing highly reactive main-group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity-enforced group 13-15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8-naphthyridine (napy) core. We show that the redox-active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element-element interaction modes, the latter ranging from isolated, element-centered lone pairs (e.g., E = Si, Ge) to cases where through-space π bonds (E = Pb), element-element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI-E2 species as viable synthetic targets, highlighting the versatility and potential applications of napy-based ligands in main-group chemistry.}, language = {en} } @phdthesis{Gerlach2023, author = {Gerlach, Marius David}, title = {Spectroscopy of fulminic acid HCNO with VUV- and soft X-ray radiation}, doi = {10.25972/OPUS-32972}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-329722}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Die Fulmins{\"a}ure HCNO wurde zum ersten Mal im Jahre 1800 synthetisiert und wurde seitdem immer wieder verwendet, um neue chemische Konzepte und Theorien zu entwickeln. Durch die erstmalige Entdeckung der Fulmins{\"a}ure im Weltall im Jahr 2009 ist die Fulmins{\"a}ure heutzutage vor allem im Bereich der Astrochemie interessant. In dieser Doktorarbeit haben wir die Interaktion von Fulmins{\"a}ure mit interstellar Strahlung, genauer mit VUV- sowie weicher R{\"o}ntgenstrahlung untersucht. In Zuge der Messung mit VUV-Strahlung konnten wir das Photoelektronenspektrum von HCNO mit hoher Aufl{\"o}sung aufnehmen und den Renner-Teller verzerrten Grundzustand des Kations mit Hilfe von Wellenpaketdynamiksimulationen beschreiben. Außerdem konnten wir den Mechanismus der dissoziativen Photoionisation bis zu einer Bindungsenergie von 15.3 eV aufkl{\"a}ren. Mit weicher R{\"o}ntgenstrahlung ist es m{\"o}glich die 1s Elektronen des HCNO zu ionisieren oder anzuregen. Der erzeugte Zustand zerf{\"a}llt anschließend durch einen Auger-Meitner Prozess, bei dem ein Auger-Elektron erzeugt wird. Im Zuge der Auger-Elektronenspektroskopie haben wir die kinetische Energie dieser Elektronen gemessen und konnten mittels quantenchemischer Rechnung die beobachten Signale analysieren. Wir untersuchten außerdem, wie das durch den Auger-Meitner Prozess erzeugte Ion zerf{\"a}llt. Hier konnten wir eine Selektivit{\"a}t des Zerfalls beobachten, je nachdem welches der 1s Elektronen im ersten Schritt angeregt oder ionisiert wurde. Diese Beobachtung konnten wir durch ein einfaches thermodynamisches Argument erkl{\"a}ren. Diese Arbeit gibt also ein vollst{\"a}ndiges Bild {\"u}ber die Interaktion von HCNO mit ionisierender Strahlung. Die erhaltenen Daten k{\"o}nnten f{\"u}r die Beschreibung von HCNO im interstellaren Raum Bedeutung haben.}, subject = {Chemie}, language = {en} } @phdthesis{Kastner2020, author = {Kastner, Matthias J.}, title = {Spectroscopic investigation of molecular adsorption and desorption from individual single-wall carbon nanotubes}, doi = {10.25972/OPUS-21175}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-211755}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {Nanoelectronics is an essential technology for down-scaling beyond the limit of silicon-based electronics. Single-Wall Carbon Nanotubes (SWNT) are semiconducting components that exhibit a large variety of properties that make them usable for sensing, telecommunication, or computational tasks. Due to their high surface to volume ratio, carbon nanotubes are strongly affected by molecular adsorptions, and almost all properties depend on surface adsorption. SWNT with smaller diameters (0.7-0.9nm) show a stronger sensitivity to surface effects. An optimized synthesis route was developed to produce these nanotubes directly. They were produced with a clean surface, high quality, and large lengths of 2 μ m. The results complement previous studies on larger diameters (0.9-1.4nm). They allow performing statistically significant assumptions for a perfect nanotube, which is selected from a subset of nanotubes with good emission intensity, and high mechanical durability. The adsorption of molecules on the surface of carbon nanotubes influences the motion and binding strength of chargeseparated states in this system. To gain insight into the adsorption processes on the surface with a minimum of concurrent overlapping effects, a microscopic setup, and a measurement technique were developed. The system was estimated to exhibit excellent properties like long exciton diffusion lengths (>350nm), and big exciton sizes (8.5(5)nm), which was substantiated by a simulation. We studied the adsorption processes at the surface of Single-Wall Carbon Nanotubes for molecules in the gas phase, solvent molecules, and surfactant molecules. The experiments were all carried out on suspended individualized carbon nanotubes on a silicon wafer substrate. The experiments in the gas-phase showed that the excitonic emission energy and intensity experiences a rapid blue shift during observation. This shift was associated with the spontaneous desorption of large clusters of gaseous molecules caused by laser heat up. The measurement of this desorption was essential for creating a reference to an initially clean surface and allows us to perform a comparison with previous measurements on this topic. Furthermore, the adsorption of hydrogen on the nanotube surface at high temperatures was investigated. It was found that a new emission mode arises slightly red-shifted to the excitonic emission in these systems. The new signal is almost equally strong as the main excitonic peak and was associated with the brightening of dark excitons at sp3-defects through a K-phonon assisted pathway. The finding is useful for the direct synthesis of spintronic devices as these systems are known to act as single-photon emitters. The suspended nanotubes were further studied to estimate the effect of solvent adsorption on the excitonic states during nanotube dispersion for each nanotube individually. A significant quantum yield loss is observable for hexane and acetonitrile, while the emission intensity was found to be the strongest in toluene. The reference to a clean surface allowed us to estimate the exact influence of the dielectric environment of adsorbing solvents on the excitonic emission energy. Solvent adsorption was found to lead to an energy shift that is almost twice as high as suggested in previous studies. The amount of this energy shift, however, was comparably similar for all solvents, which suggests that the influence of the distinct dielectric constant in the outer environment less significantly influences the energy shift than previously thought. An interesting phenomenon was found when using acetonitrile as a solvent, which leads to greatly enhanced emission properties. The emission is more than twice as high as in the same air-suspended nanotubes, which suggests a process that depends on the laser intensity. In this study, it was reasonably explained how an energy down-conversion is possible through the coupling of the excitonic states with solvent vibrations. The strength of this coupling, however, also suggests adsorptions to the inside of the tubular nanotube structure leading to a coupled vibration of linear acetonitrile molecules that are adsorbed to the inner surface. The findings are important for the field of nanofluidics and provide an excellent system for efficient energy down-conversion in the transmission window of biological tissue. Having separated the pure effect of solvent adsorption allowed us to study the undisturbed molecular adsorption of polymers in these systems. The addition of polyfluorene polymer leads to a slow but stepwise intensity increase. The intensity increase is overlapping with a concurrent process that leads to an intensity decrease. Unfortunately, observing the stepwise process has a low spacial resolution of only 100-250nm, which is in the range of the exciton diffusion length in these systems and hinders detailed analysis. The two competing and overlapping processes processes are considered to originate from slow π-stacking and fast side-chain binding. Insights into this process are essential for selecting suitably formed polymers. However, the findings also emphasize the importance of solvent selection during nanotube dispersion since solvent effects were proven to be far more critical on the quantum yield in these systems. These measurements can shed light on the ongoing debate on polymers adsorption during nanotube individualization and allow us to direct the discussion more towards the selection of suitable solvents. This work provides fundamental insights into the adsorption of various molecules on the surface of individually observed suspended Single-Wall Carbon Nanotubes. It allows observing the adsorption of individual molecules below the optical limit in the solid, liquid, and gas phases. Nanotubes are able to act as sensing material for detecting changes in their direct surrounding. These fundamental findings are also crucial for increasing the quantum yield of solvent-dispersed nanotubes. They can provide better light-harvesting systems for microscopy in biological tissue and set the base for a more efficient telecommunication infrastructure with nano-scale spintronics devices and lasing components. The newly discovered solvent alignment in the nanotube surrounding can potentially also be used for supercapacitors that are needed for caching the calculation results in computational devices that use polymer wrapped nanotubes as transistors. Although fundamental, these studies develop a strategy to enlighten this room that is barely only visible at the bottom of the nano-scale.}, subject = {Kohlenstoff-Nanor{\"o}hre}, language = {en} } @phdthesis{Quast2012, author = {Quast, Tatjana}, title = {Spectroscopic investigation of charge-transfer processes and polarisation pulse shaping in the visible spectral range}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74265}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {The first part deals with the spectroscopic investigation of ultrafast light-induced charge-transfer processes in different molecular compounds. In the second part, the question of the generation and characterisation of broadband visible polarisation-shaped laser pulses is treated.}, subject = {Polarisiertes Licht}, language = {en} } @article{RewitzKeitzlTuchschereretal.2012, author = {Rewitz, Christian and Keitzl, Thomas and Tuchscherer, Philip and Goetz, Sebastian and Geisler, Peter and Razinskas, Gary and Hecht, Bert and Brixner, Tobias}, title = {Spectral-interference microscopy for characterization of functional plasmonic elements}, series = {Optics Express}, journal = {Optics Express}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-85922}, year = {2012}, abstract = {Plasmonic modes supported by noble-metal nanostructures offer strong subwavelength electric-field confinement and promise the realization of nanometer-scale integrated optical circuits with well-defined functionality. In order to measure the spectral and spatial response functions of such plasmonic elements, we combine a confocal microscope setup with spectral interferometry detection. The setup, data acquisition, and data evaluation are discussed in detail by means of exemplary experiments involving propagating plasmons transmitted through silver nanowires. By considering and experimentally calibrating any setup-inherent signal delay with an accuracy of 1 fs, we are able to extract correct timing information of propagating plasmons. The method can be applied, e.g., to determine the dispersion and group velocity of propagating plasmons in nanostructures, and can be extended towards the investigation of nonlinear phenomena.}, language = {en} } @unpublished{HuberPresWittmannetal.2019, author = {Huber, Bernhard and Pres, Sebastian and Wittmann, Emanuel and Dietrich, Lysanne and L{\"u}ttig, Julian and Fersch, Daniel and Krauss, Enno and Friedrich, Daniel and Kern, Johannes and Lisinetskii, Victor and Hensen, Matthias and Hecht, Bert and Bratschitsch, Rudolf and Riedle, Eberhard and Brixner, Tobias}, title = {Space- and time-resolved UV-to-NIR surface spectroscopy and 2D nanoscopy at 1 MHz repetition rate}, issn = {0034-6748}, doi = {10.1063/1.5115322}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-191906}, year = {2019}, abstract = {We describe a setup for time-resolved photoemission electron microscopy (TRPEEM) with aberration correction enabling 3 nm spatial resolution and sub-20 fs temporal resolution. The latter is realized by our development of a widely tunable (215-970 nm) noncollinear optical parametric amplifier (NOPA) at 1 MHz repetition rate. We discuss several exemplary applications. Efficient photoemission from plasmonic Au nanoresonators is investigated with phase-coherent pulse pairs from an actively stabilized interferometer. More complex excitation fields are created with a liquid-crystal-based pulse shaper enabling amplitude and phase shaping of NOPA pulses with spectral components from 600 to 800 nm. With this system we demonstrate spectroscopy within a single plasmonic nanoslit resonator by spectral amplitude shaping and investigate the local field dynamics with coherent two-dimensional (2D) spectroscopy at the nanometer length scale ("2D nanoscopy"). We show that the local response varies across a distance as small as 33 nm in our sample. Further, we report two-color pump-probe experiments using two independent NOPA beamlines. We extract local variations of the excited-state dynamics of a monolayered 2D material (WSe2) that we correlate with low-energy electron microscopy (LEEM) and reflectivity (LEER) measurements. Finally, we demonstrate the in-situ sample preparation capabilities for organic thin films and their characterization via spatially resolved electron diffraction and dark-field LEEM.}, language = {en} } @article{TurkinHolzapfelAgarwaletal.2021, author = {Turkin, Arthur and Holzapfel, Marco and Agarwal, Mohit and Fischermeier, David and Mitric, Roland and Schweins, Ralf and Gr{\"o}hns, Franziska and Lambert, Christoph}, title = {Solvent Induced Helix Folding of Defined Indolenine Squaraine Oligomers}, series = {Chemistry—A European Journal}, volume = {27}, journal = {Chemistry—A European Journal}, number = {32}, doi = {10.1002/chem.202101063}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256869}, pages = {8380-8389}, year = {2021}, abstract = {A protecting group strategy was employed to synthesise a series of indolenine squaraine dye oligomers up to the nonamer. The longer oligomers show a distinct solvent dependence of the absorption spectra, that is, either a strong blue shift or a strong red shift of the lowest energy bands in the near infrared spectral region. This behaviour is explained by exciton coupling theory as being due to H- or J-type coupling of transition moments. The H-type coupling is a consequence of a helix folding in solvents with a small Hansen dispersity index. DOSY NMR, small angle neutron scattering (SANS), quantum chemical and force field calculations agree upon a helix structure with an unusually large pitch and open voids that are filled with solvent molecules, thereby forming a kind of clathrate. The thermodynamic parameters of the folding process were determined by temperature dependent optical absorption spectra.}, language = {en} } @unpublished{FerschMalyRueheetal.2023, author = {Fersch, Daniel and Mal{\´y}, Pavel and R{\"u}he, Jessica and Lisinetskii, Victor and Hensen, Matthias and W{\"u}rthner, Frank and Brixner, Tobias}, title = {Single-Molecule Ultrafast Fluorescence-Detected Pump-Probe Microscopy}, doi = {10.25972/OPUS-31348}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313485}, year = {2023}, abstract = {We introduce fluorescence-detected pump-probe microscopy by combining a wavelength-tunable ultrafast laser with a confocal scanning fluorescence microscope, enabling access to the femtosecond time scale on the micrometer spatial scale. In addition, we obtain spectral information from Fourier transformation over excitation pulse-pair time delays. We demonstrate this new approach on a model system of a terrylene bisimide (TBI) dye embedded in a PMMA matrix and acquire the linear excitation spectrum as well as time-dependent pump-probe spectra simultaneously. We then push the technique towards single TBI molecules and analyze the statistical distribution of their excitation spectra. Furthermore, we demonstrate the ultrafast transient evolution of several individual molecules, highlighting their different behavior in contrast to the ensemble due to their individual local environment. By correlating the linear and nonlinear spectra, we assess the effect of the molecular environment on the excited-state energy.}, subject = {Fluoreszenz}, language = {en} } @article{BrixnerPawłowskaGoetzetal.2014, author = {Brixner, Tobias and Pawłowska, Monika and Goetz, Sebastian and Dreher, Christian and Wurdack, Matthias and Krauss, Enno and Razinskas, Gary and Geisler, Peter and Hecht, Bert}, title = {Shaping and spatiotemporal characterization of sub-10-fs pulses focused by a high-NA objective}, doi = {10.1364/OE.22.031496}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-111120}, year = {2014}, abstract = {We describe a setup consisting of a 4 f pulse shaper and a microscope with a high-NA objective lens and discuss the spects most relevant for an undistorted spatiotemporal profile of the focused beam. We demonstrate shaper-assisted pulse compression in focus to a sub-10-fs duration using phase-resolved interferometric spectral modulation (PRISM). We introduce a nanostructure-based method for sub-diffraction spatiotemporal characterization of strongly focused pulses. The distortions caused by optical aberrations and space-time coupling from the shaper can be reduced by careful setup design and alignment to about 10 nm in space and 1 fs in time.}, language = {en} } @phdthesis{Draeger2020, author = {Draeger, Simon}, title = {Rapid Two-Dimensional One-Quantum and Two-Quantum Fluorescence Spectroscopy}, doi = {10.25972/OPUS-19816}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198164}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {In den letzten zwei Jahrzehnten hat sich die koh{\"a}rente mehrdimensionale Femtosekunden- Spektroskopie zu einem leistungsstarken und vielseitigen Instrument zur Untersuchung der chemischen Dynamik einer Vielzahl von Quantensystemen entwickelt. Die Kombination von transienten Informationen, die der Anrege-Abrage-Spektroskopie entsprechen, mit Informationen zur Kopplung zwischen energetischen Zust{\"a}nden und der Systemumgebung erm{\"o}glicht einen umfassenden Einblick in atomare und molekulare Eigenschaften. Viele experimentelle 2D-Aufbauten verwenden den koh{\"a}renzdetektierten Ansatz, bei dem nichtlineare Systemantworten als koh{\"a}rente elektrische Felder emittiert und r{\"a}umlich getrennt von den Anregungspulsen detektiert werden. Als Alternative zu diesem experimentell anspruchsvollen Ansatz wurde die populationsbasierte 2D-Spektroskopie etabliert. Hier wird die koh{\"a}rente Information in den Phasen einer kollinearen Anregungspulsfolge codiert und aus inkoh{\"a}renten Signalen wie Fluoreszenz {\"u}ber Phase Cycling extrahiert. Grunds{\"a}tzlich kann durch die Verwendung von Fluoreszenz als Observable eine Sensitivit{\"a}t bis zum Einzelmolek{\"u}lniveau erreicht werden. Ziel dieser Arbeit war die Realisierung eines pulsformergest{\"u}tzten vollst{\"a}ndig kollinearen fluoreszenzdetektierten 2D-Aufbaus und die Durchf{\"u}hrung von Proof-of- Principle-Experimenten in der Fl{\"u}ssigphase. Dieser inh{\"a}rent phasenstabile und kompakte Aufbau wurde in Kapitel 3 vorgestellt. Der verwendete Pulsformer erm{\"o}glicht eine Amplituden- und Phasenmodulation von Schuss zu Schuss. Zwei verschiedene Arten von Weißlichtquellen wurden angewendet und hinsichtlich ihrer jeweiligen Vorteile f{\"u}r die 2D-Fluoreszenzspektroskopie bewertet. Eine Vielzahl von Artefaktquellen, die mit dem vorliegenden Aufbau auftreten k{\"o}nnen, wurden diskutiert und Korrekturschemata und Anweisungen zur Vermeidung dieser Artefakte bereitgestellt. In Kapitel 4 wurde der Aufbau anhand einer Vierpulssequenz mit Cresylviolett in Ethanol demonstriert. Es wurde ein detailliertes Datenerfassungs- und Datenanalyseverfahren vorgestellt, bei dem Phase Cycling zur Extraktion der nichtlinearen Beitr{\"a}ge verwendet wird. Abh{\"a}ngig vom Phase Cycling-Schema ist es m{\"o}glich, alle nichtlinearen Beitr{\"a}ge in einer einzigen Messung aufzudecken. Literaturbekannte Oszillationen von Cresylviolett w{\"a}hrend der Populationszeit konnten reproduziert werden. Aufgrund der Messung in einer Umgebung im Rotating Frame und einer 1 kHz Schuss-zu-Schuss Pulsinkrementierung war es m{\"o}glich, ein 2D-Spektrum f{\"u}r eine Populationszeit in 6 s zu erhalten. Eine Fehlerevaluierung hat gezeigt, dass eine zehnfache Mittelwertbildung (1 min) ausreicht, um eine mittlere quadratische Abweichung von < 0:05 gegen� uber einer 400-fachen Mittelwertbildung zu erhalten, was beweist, dass das verwendete Messschema gut geeignet ist. Die Realisierung des ersten experimentellen fluoreszenzdetektierten 2Q-2D-Experiments und der erste experimentelle Zugang zum theoretisch vorhergesagten 1Q-2Q-Beitrag wurden in Kapitel 5 vorgestellt. Zu diesem Zweck wurde eine Dreipulssequenz auf Cresylviolett in Ethanol angewendet und die experimentellen Ergebnisse wurden mit Simulationen eines einfachen Sechs-Level-Systems verglichen. Im Gegensatz zur koh{\"a}renzdetektierten 2Q-2D-Spektroskopie sind bei dem vorgestellten Aufbau keine nichtresonanten L{\"o}sungsmittelsignale und Streuungsbeitr{\"a}ge sichtbar und es ist kein zus{\"a}tzliches Phasing-Verfahren erforderlich. Durch eine Kombination aus Experimenten und systematischen Simulationen wurden Informationen {\"u}ber die Relaxation der L{\"o}sungsmittelh{\"u}lle und die Korrelationsenergie gewonnen. Auf der Basis von Simulationen wurden Effekte der Pfadausl{\"o}schung diskutiert, die darauf schließen lassen, dass die 1Q-2Q-2D-Spektroskopie m{\"o}glicherweise die quantitative Analyse f{\"u}r molekulare Systeme erleichtert, die eine starke nichtstrahlende Relaxation aus h{\"o}heren elektronischen Zust{\"a}nden aufweisen. Zusammenfassend ist es mit der vorgestellten Methode m{\"o}glich, alle nichtlinearen Beitr{\"a}ge mit einer schnellen Datenaufnahme und einem einfach einzurichtenden Aufbau zu erfassen. Die gezeigten Proof-of-Principle-Experimente stellen eine Erweiterung der 2D-Spektroskopie-Werkzeugpalette dar und bieten eine fundierte Grundlage f{\"u}r zuk{\"u}nftige Anwendungen wie mehrdimensionale Spektroskopie, mehrfarbige 2D-Spektroskopie oder die Kombination von simultanen Fl{\"u}ssig- und Gasphasen-2D-Experimenten.}, subject = {Fluoreszenzspektroskopie}, language = {en} } @article{MuellerLuettigMalyetal.2019, author = {Mueller, Stefan and L{\"u}ttig, Julian and Mal{\´y}, Pavel and Ji, Lei and Han, Jie and Moos, Michael and Marder, Todd B. and Bunz, Uwe H. F. and Dreuw, Andreas and Lambert, Christoph and Brixner, Tobias}, title = {Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways}, series = {Nature Communications}, volume = {10}, journal = {Nature Communications}, doi = {10.1038/s41467-019-12602-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-202529}, pages = {4735}, year = {2019}, abstract = {Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions.}, language = {en} } @phdthesis{Albert2018, author = {Albert, Julian}, title = {Quantum Studies on Low-Dimensional Coupled Electron-Nuclear Dynamics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161512}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {In the context of quantum mechanical calculations, the properties of non-adiabatic coupling in a small system, the Shin-Metiu model, is investigated. The transition from adiabatic to non-adiabatic dynamics is elucidated in modifying the electron-nuclear interaction. This allows the comparison of weakly correlated electron-nuclear motion with the case where the strong correlations determine the dynamics. The studies of the model are extended to include spectroscopical transitions being present in two-dimensional and degenerate four-wave mixing spectroscopy. Furthermore, the quantum and classical time-evolution of the coupled motion in the complete electron-nuclear phase space is compared for the two coupling cases. Additionally, the numerically exact electron flux within the weak coupling case is compared to the Born-Oppenheimer treatment. In the last part of the thesis, the model is extended to two dimensions. The system then possesses potential energy surfaces which exhibit a typical 'Mexican hat'-like structure and a conical intersection in the adiabatic representation. Thus, it is possible to map properties of the system onto a vibronic coupling (Jahn-Teller) hamiltonian. Exact wave-packet propagations as well as nuclear wave-packet dynamics in the adiabatic and diabatic representation are performed.}, subject = {Theoretische Chemie}, language = {en} }