@phdthesis{Spenst2017, author = {Spenst, Peter}, title = {Xylylene Bridged Perylene Bisimide Cyclophanes and Macrocycles}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139015}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {This work is concerned with the syntheses and photophysical properties of para-xylylene bridged macrocycles nPBI with ring sizes from two to nine PBI units, as well as the complexation of polycyclic aromatic guest compounds. With a reduced but substantial fluorescence quantum yield of 21\% (in CHCl3) the free host 2PBI(4-tBu)4 can be used as a dual fluorescence probe. Upon encapsulation of rather electron-poor guests the fluorescence quenching interactions between the chromophores are prevented, leading to a significant fluorescence enhancement to > 90\% ("turn-on"). On the other hand, the addition of electron-rich guest molecules induces an electron transfer from the guest to the electron-poor PBI chromophores and thus quenches the fluorescence entirely ("turn-off"). The photophysical properties of the host-guest complexes were studied by transient absorption spectroscopy. These measurements revealed that the charge transfer between guest and 2PBI(4-tBu)4 occurs in the "normal region" of the Marcus-parabola with the fastest charge separation rate for perylene. In contrast, the charge recombination back to the PBI ground state lies far in the "inverted region" of the Marcus-parabola. Beside complexation of planar aromatic hydrocarbons into the cavity of the cyclophanes an encapsulation of fullerene into the cyclic trimer 3PBI(4-tBu)4 was observed. 3PBI(4-tBu)4 provides a tube-like structure in which the PBI subunits represent the walls of those tubes. The cavity has the optimal size for hosting fullerenes, with C70 fitting better than C60 and a binding constant that is higher by a factor of 10. TA spectroscopy in toluene that was performed on the C60@3PBI(4-tBu)4 complex revealed two energy transfer processes. The first one comes from the excited PBI to the fullerene, which subsequently populates the triplet state. From the fullerene triplet state a second energy transfer occurs back to the PBI to generate the PBI triplet state. In all cycles that were studied by TA spectroscopy, symmetry-breaking charge separation (SB-CS) was observed in dichloromethane. This process is fastest within the PBI cyclophane 2PBI(4-tBu)4 and slows down for larger cycles, suggesting that the charge separation takes place through space and not through bonds. The charges then recombine to the PBI triplet state via a radical pair intersystem crossing (RP-ISC) mechanism, which could be used to generate singlet oxygen in yields of ~20\%. By changing the solvent to toluene an intramolecular folding of the even-numbered larger cycles was observed that quenches the fluorescence and increases the 0-1 transition band in the absorption spectra. Force field calculations of 4PBI(4-tBu)4 suggested a folding into pairs of dimers, which explains the remarkable odd-even effect with respect to the number of connected PBI chromophores and the resulting alternation in the absorption and fluorescence properties. Thus, the even-numbered macrocycles can fold in a way that all chromophores are in a paired arrangement, while the odd-numbered cycles have open conformations (3PBI(4-tBu)4, 5PBI(4-tBu)4, 7PBI(4-tBu)4) or at least additional unpaired PBI unit (9PBI(4-tBu)4). With these experiments we could for the first time give insights in the interactions between cyclic PBI hosts and aromatic guest molecules. Associated with the encapsulation of guest molecules a variety of possible applications can be envisioned, like fluorescence sensing, chiral recognition and photodynamic therapy by singlet oxygen generation. Particularly, these macrocycles provide photophysical relaxation pathways of PBIs, like charge separation and recombination and triplet state formation that are hardly feasible in monomeric PBI dyes. Furthermore, diverse compound specific features were found, like the odd-even effect in the folding process or the transition of superficial nanostructures of the tetrameric cycle influenced by the AFM tip. The comprehensive properties of these macrocycles provide the basis for further oncoming studies and can serve as an inspiration for the synthesis of new macrocyclic compounds.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Schindler2022, author = {Schindler, Dorothee}, title = {Water Oxidation with Multinuclear Ruthenium Catalysts}, doi = {10.25972/OPUS-23309}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-233093}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In terms of the need of environmentally benign renewable and storable energy sources, splitting of water into hydrogen and oxygen by using sunlight is a promising approach. Hereby, water oxidation catalysts (WOCs) are required to perform the water oxidation comprising the transfer of four electrons to provide the reducing equivalents for producing hydrogen. The class of Ru(bda) (bda = 2,2'-bipyridine-6,6'-dicarboxylate) catalysts has proven to be efficient for this reaction. In this thesis, ligand exchange processes in Ru(bda) complexes have been analyzed and the formation of multinuclear macrocyclic WOCs was studied. Based on the knowledge acquired by these studies, new multinuclear cyclic Ru(bda) complexes have been synthesized and their catalytic efficiencies in homogeneous water oxidation have been investigated. Going one step further for setting up functional devices, molecular WOCs have been immobilized on conducting or semiconducting supporting materials. Direct anchoring on carbon nanotubes generated a promising materials for further applications.}, subject = {Rutheniumkomplexe}, language = {en} } @phdthesis{Mahlmeister2023, author = {Mahlmeister, Bernhard}, title = {Twisted Rylene Bisimides for Organic Solar Cells and Strong Chiroptical Response in the Near Infrared}, doi = {10.25972/OPUS-34610}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-346106}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The chirality of the interlocked bay-arylated perylene motif is investigated upon its material prospect and the enhancement of its chiroptical response to the NIR spectral region. A considerable molecular library of inherently chiral perylene bisimides (PBIs) was utilized as acceptors in organic solar cells to provide decent device performances and insights into the structure-property relationship of PBI materials within a polymer blend. For the first time in the family of core-twisted PBIs, the effects of enantiopurity on the device performance was thoroughly investigated. The extraordinary structural sensitivity of CD spectroscopy served as crucial analytical tool to bridge the highly challenging gap between molecular properties and device analytics by proving the excitonic chirality of a helical PBI dimer. The chirality of this perylene motif could be further enhanced on a molecular level by both the expansion and the enhanced twisting of the π-scaffold to achieve a desirable strong chiroptical NIR response introducing a new family of twisted QBI-based nanoribbons. These achievements could be substantially further developed by expanding this molecular concept to a supramolecular level. The geometrically demanding supramolecular arrangement necessary for the efficient excitonic coupling was carefully encoded into the molecular design. Accordingly, the QBIs could form the first J-type aggregate constituting a fourfold-stranded superhelix of a rylene bisimide with strong excitonic chirality. Therefore, this thesis has highlighted the mutual corroboration of experimental and theoretical data from the molecular to the supramolecular level. It has demonstrated that for rylene bisimide dyes, the excitonic contribution to the overall chiroptical response can be designed and rationalized. This can help to pave the way for new organic functional materials to be used for chiral sensing or chiral organic light-emitting devices.}, subject = {Molek{\"u}l}, language = {en} } @phdthesis{Bauer2023, author = {Bauer, Christian}, title = {Towards ecological and efficient electrochemical energy storage in supercapacitors and sodium ion batteries using onion-like carbon}, doi = {10.25972/OPUS-31795}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-317956}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {In this thesis, the usage of onion-like carbon (OLC) for energy storage applications was researched regarding sustainability, performance and processability. This work targets to increase the scientific understanding regarding the role of OLC in electrodes and to facilitate a large-scale production, which is the foundation for commercial application. Research was devoted to increase the knowledge in the particular field, to yield synergistic approaches and a shared value regarding sustainability and performance.}, subject = {Elektrochemie}, language = {en} } @phdthesis{Shamburger2021, author = {Shamburger, William}, title = {Total Synthesis of Mono- and Dimeric Naphthylisoquinoline Alkaloids and Related Analogs}, doi = {10.25972/OPUS-25061}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-250612}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Our research group focusses on the isolation, structural elucidation, and synthesis of bioactive natural products, among others, the naphthylisoquinoline alkaloids from tropical lianas. This intriguing class of compounds comprises representatives with activities against, e.g. P. falciparum, the cause of Malaria tropica, against the neglected disease leishmaniasis, and, as discovered more recently, against different types of cancer cells. Based on the high potency of theses extraordinary secondary metabolites, this thesis was devoted to the total synthesis of bioactive natural products and closely related analogs.}, subject = {Naphthylisochinolinalkaloide}, language = {en} } @phdthesis{WagenhaeusergebVonhausen2024, author = {Wagenh{\"a}user [geb. Vonhausen], Yvonne}, title = {Thermodynamic Investigations on the Dimerization and Anti-Cooperative Self-Assembly of Dipolar Merocyanines}, doi = {10.25972/OPUS-35211}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-352111}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {Dipolar merocyanines are very attractive supramolecular building blocks, as they combine interesting functional properties with strong, directional intermolecular interactions. The pyridine dioxocyano-pyridine (PYOP) chromophore (Chapter 2.2), used in this thesis, stands out because of its exceptionally high ground state dipole moment (g ~ 17 D), in combination with the option to retain good solubility also in unpolar solvents, by decoration with solubilizing groups. The reliable binding motif of anti-parallel -stacking due to dipole-dipole interactions has allowed the design of molecular building blocks that form assemblies of predictable geometry. The intense unstructured charge transfer UV/Vis absorption band (eg ~ 10.7 D) is a result of the dominant contribution of the zwitterionic resonance structure which brings the PYOP chromophore just beyond the cyanine limit in solvents of low polarity (c2 = 0.60, 1,4 dioxane). The high sensitivity of the S0 - S1 UV/Vis absorption band to the environment manifests itself in a pronounced negative solvatochromism and strong H-type exciton coupling within -stacked PYOP assemblies. In accordance with the classical molecular exciton theory, an increasing hypsochromic shift of the dominant absorption band of these H aggregates can be observed as the stack size increases up to about six chromophores, where it levels out at about max ~ 440 nm (CHCl3). This allows a uniquely simple estimation of the number of interacting chromophores within the self-assembled structure from a single UV/Vis absorption spectrum of an aggregate. The defined and well investigated PYOP dimer formation was employed in this thesis to probe the applicability and limitations of concentration-, temperature-, and solvent-dependent self-assembly studies (Chapter 3). Straightforward theoretical models to evaluate datasets of concentration-, temperature-, and solvent-dependent UV/Vis absorption by nonlinear regression analysis were derived for the case of dimer formation (Chapter 2.1). Although the dimer model is well known and widely applied in literature, this detailed derivation is helpful to understand assumptions and potential problems of the different approaches for the determination of thermodynamic parameters. This helps to decide on the most appropriate method to analyse a system of interest. In this regard it should be noted that covering a large portion of the self-assembly process with the experimental data is a prerequisite for the accuracy of the analysis. Additionally, many of the insights can also be transferred to other self-assembly systems like supramolecular polymerization or host-guest interactions. The concentration-dependent analysis is the most straightforward method to investigate self-assembly equilibria. No additional assumptions, besides mass balance and mass action law, are required. Since it includes the least number of parameters (only K, if M/D are known), it is the most, or even only, reliable method, to elucidate the self-assembly mechanism of an unknown system by model comparison. To cover a large concentration range, however, the compound must be soluble enough and generally sample amounts at least in the low mg scale must be available. The temperature-dependent analysis has the advantage that all thermodynamic parameters G0, H0 and S0 can be obtained from a single sample in one automated measurement. However, the accessible temperature-range is experimentally often quite limited and dependent on the solvent. For systems which do not show the transition from monomer to aggregate in a narrow temperature range, as given for, e.g., cooperative aggregation or processes with a high entropy contribution, often not the entire self-assembly process can be monitored. Furthermore, the assumptions of temperature-independent extinction coefficients of the individual species as well as temperature-independent H0 and S0 must be met. Monte Carlo simulations of data sets demonstrated that even minor changes in experimental data can significantly impact the optimized values for H0 and S0. This is due to the redundancy of these two parameters within the model framework and even small thermochromic effects can significantly influence the results. The G0 value, calculated from H0 and S0, is, however, still rather reliable. Solvent-dependent studies can often cover the entire self-assembly process from monomeric (agg = 0) to the fully aggregated state (agg = 1). However, for dyes with strong solvatochromic effects, such as the dipolar merocyanines investigated in this thesis, the results are affected. Also, the assumption of a linear relation of the binding energy G0 and the fraction of denaturating solvent f, which is based on linear free energy relationships between G0 and the solvent polarity, can lead to errors. Especially when specific solvent effects are involved. For the evaluation of experimental data by nonlinear regression, general data analysis software can be used, where user-defined fit models and known parameters can be implemented as desired. Alternatively, multiple specialized programs for analysing self-assembly data are available online. While the latter programs are usually more user-friendly, they have the disadvantage of being a "black box" where only pre-implemented models can be used without the option for the user to adapt models or parameters for a specific system. In Chapter 3 comprehensive UV/Vis absorption datasets are presented for the dimerization of merocyanine derivative 1 in 1,4-dioxane, which allowed for the first time a direct comparison of the results derived from concentration-, temperature-, and solvent-dependent self-assembly studies. The results for the binding constant K and corresponding G0 from the concentration- and temperature-dependent analysis were in very good agreement, also in comparison to the results from ITC. For the temperature-dependent analysis, though, multiple datasets of samples with different concentration had to be evaluated simultaneously to cover a meaningful part of the self-assembly process. Furthermore, a significant dependence of the optimized parameters H0 and S0 on the wavelength chosen for the analysis was observed. This can be rationalized by the small thermochromic shifts of both the monomer and the dimer UV/Vis absorption band. The results from the solvent-dependent evaluation showed the largest deviation, as expected for the highly solvatochromic merocyanine dye. However, even here by evaluation at 491 and 549 nm the deviation for G0 was only 2.5 kJ mol1 (9\%) with respect to the results from the concentration-dependent analysis (G0 = 29.1 kJ mol1). Thus, despite the strong solvatochromism of the dipolar chromophore, it can still be considered a reliable method for estimating the binding strength. Furthermore, multiple repetitions of the concentration-, temperature-, and solvent-dependent studies provided insight into the reproducibility of the results and possible sources of experimental errors. In all cases, the deviations of the results were small (G0 < 0.4 kJ mol1) and within the same range as the fit error from the nonlinear regression analysis. The insights from these studies were an important basis for the in-depth investigation of a more complex supramolecular system in Chapter 4, as a single method is often not enough to capture the full picture of a more complicated self-assembly process. To elucidate the anti-cooperative self-assembly of the chiral merocyanine 2, a combination of multiple techniques had to be applied. Solvent-dependent UV/Vis absorption studies in CH2Cl2/MCH mixtures showed the step-wise assembly of the merocyanine monomer (max(M) = 549 nm, CH2Cl2) to first a dimer (max(D) = 498 nm, CH2Cl2/MCH 15:85) by dipole-dipole interactions, and then a -stacked higher aggregate (max(H) = 477 nm, MCH), with pronounced H-type coupling. The thermodynamic evaluation of this data, however, suffered from the severe solvatochromism, especially of the monomeric species (max(M, CH2Cl2) = 549 nm, max(M, MCH) = 596 nm). Therefore, concentration-dependent studies were performed at three different temperatures (298, 323, 353 K) to elucidate the self-assembly mechanism and determine reliable thermodynamic parameters. The studies at elevated temperatures were hereby necessary, to obtain experimental data over a larger agg--range. Due to the pronounced difference in the thermodynamic driving force for dimerization and higher aggregate formation (KD/K5 = 6500) a concentration range exists in MCH where almost exclusively the dimer species of 2 is present, before further self-assembly by dispersion interactions occurs. Therefore, the data could be evaluated independently for the two self-assembly steps. The self-assembly of dimers into the higher aggregate could not be described by the isodesmic model but was fitted satisfactorily to a pentamer model. This rather small size of about ten -stacked PYOP chromophores was, furthermore, consistently indicated by AFM, VPO and DOSY NMR measurements. Based on 1D and 2D NMR data as well as the strong bisignate CD signal of the higher aggregate in combination with TD-DFT calculations, a P-helical stack is proposed as its structure. The small size can be rationalized by the anti-cooperative self-assembly mechanism and the sterical demand of the solubilizing trialkoxyphenyl and the chiral tetralin substituents. Additionally, the aliphatic shell formed by the solubilizing chains around the polar chromophore stack, can account for the exceptionally high solubility of 2 in MCH (> 15 mg mL1). These combined studies of the self-assembly process enabled the identification of suitable conditions for the investigation of fluorescence properties of the individual aggregate species. Aggregation-induced emission enhancement was observed for the almost non-emissive monomer (Fl(M) = 0.23\%), which can be rationalized by the increasing rigidification within the dimer (Fl(D) = 2.3\%) and the higher aggregate (Fl(H) = 4.5\%). The helical chirality of the PYOP decamer stack, furthermore, gave rise to a strong CPL signal with a large glum value of 0.011. The important conclusion of this thesis is that the temperature- and solvent-dependent analyses are valid alternatives to the classical concentration-dependent analysis to determine thermodynamic parameters of self-assembly equilibria. Although, for a specific supramolecular system, one approach might be favourable over the others for a variety of reasons. The experimental limitations often demand a combination of techniques to fully elucidate a self-assembly process and to gain insights in the aggregate structure. The anti-cooperative merocyanine self-assembly, which was described here for the first time for the PYOP merocyanine 2, is no exception. Besides the interest in the merocyanine assemblies from a structural and functional point of view, the insights gained from the presented studies can also be transferred to other self-assembly systems and be a guide to find the most appropriate analysis technique.}, subject = {Merocyanine}, language = {en} } @phdthesis{Sturm2006, author = {Sturm, Christian}, title = {Theoretical Investigation of the Geometrical Arrangements of alpha-alanyl-peptide Nucleic Acid Hexamer Dimers and the Underlying Interstrand Binding Motifs}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-20363}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {Die Funktionalit{\"a}ten der DNA oder RNA werden haupts{\"a}chlich durch die verschiedenen Wechselwirkungen der paarenden Nucleinbasen bestimmt. Um die komplexen Zusammenh{\"a}nge dieser verschiedenen Wechselwirkungen zu verstehen, werden Modellsysteme ben{\"o}tigt, die weniger Restriktionen durch das R{\"u}ckgrat besitzen. Ein Beispiel f{\"u}r solche Systeme sind Peptidnucleins{\"a}uren (PNA), in denen das Zuckerphosphatr{\"u}ckgrat der DNA oder RNA durch ein Peptidr{\"u}ckgrat ersetzt wird. Diederichsen et al. gelang es, eine große Anzahl solcher Systeme mit einen alpha-Alanyl-R{\"u}ckgrat zu synthetisieren, an das kanonische und nicht-kanonische Nucleins{\"a}uren gebunden sind. Diese Systeme aggregieren in verschiedenen Bindungsmotiven, die nicht in der DNA oder RNA auftauchen. Diese ungew{\"o}hnlichen Paarungsmotive k{\"o}nnten einen tiefen Einblick in das Zusammenspiel der Wechselwirkungen der Nucleinbasen geben, aber die geringen L{\"o}slichkeit der alpha-Alanyl-PNA Oligomere verhinderte eine experimentelle Charakterisierung der geometrischen Anordnung durch R{\"o}ntgenstruktur- oder NMR-Experimente. Lediglich die absolute Stabilit{\"a}t der verschiedenen Aggregate konnte durch Messungen der Schmelztemperatur mit Hilfe der UV-Spektroskopie bestimmt werden. Da die Kenntnis der geometrischen Strukturen sowie der ausgebildeten Bindungsmotive wichtig ist, um einen Einblick in das Zusammenspiel der einzelnen Wechselwirkungen zu erlangen, besteht das Ziel der vorliegenden Arbeit darin, solche Informationen mit der Hilfe von theoretischen Methoden zu erlangen. Zus{\"a}tzlich sind Effekte von Interesse, aus denen sich Trends bez{\"u}glich der Stabilit{\"a}t bestimmen lassen. Solche Untersuchungen sind einfacher zu realisieren als die Berechnung der absoluten Stabilit{\"a}ten, da viele Beitr{\"a}ge zur absoluten Energie f{\"u}r {\"a}hnliche Systeme (entropische und dynamische Effekte) in etwa gleich groß sind. Somit sind diese entropischen und dynamischen Effekte f{\"u}r das Ziel dieser Arbeit weniger wichtig. Zur Untersuchung der Bindungseigenschaften und der Stabilit{\"a}ten von alpha-Alanyl-PNA Oligomeren war es notwendig, bis dato nicht parametrisierte Nucleinbasen in den Parametersatz des Amber4.1 Kraftfelds zu integrieren. Die fehlenden Ladungen wurden durch Berechungen mit dem R.E.D-Programm-Paket ermittelt. Das Programm bestimmt aus dem elektrostatischen Potential einer optimierten Struktur die atomzentrierten Ladungen. Die fehlenden Bindungsparameter wurden der Literatur entnommen. Die Untersuchungen der einzelnen Dimere begannen jeweils mit der Konstruktion der alpha-Alanyl-PNAs f{\"u}r alle m{\"o}glichen Paarungsmodi. Es konnte gezeigt werden, dass bestimmte Paarungsmodi aufgrund der geometrischen Gegebenheiten der Dimere und des R{\"u}ckgrats nicht realisierbar waren. F{\"u}r andere Dimere war ein Aufbau der alpha-Alanyl-PNA-Dimere zwar m{\"o}glich, jedoch zerfielen die Dimere wieder w{\"a}hrend einer ersten Geometrieoptimierung aufgrund der hohen Spannung im R{\"u}ckgrat. Die stabilen Systeme wurden zun{\"a}chst in verschiedenen Molekulardynamik-(MD)-L{\"a}ufen simuliert. Informationen {\"u}ber die Geometrie bei T=0 K wurden durch Geometrieoptimierungen erhalten, die an verschieden Punkten der MD L{\"a}ufe gestartet wurden. Die resultierenden Geometrien aus den verschiedenen Anfangspunkten waren identisch. F{\"u}r die geometrieoptimierten Strukturen wurden f{\"u}r das T=0 K Modell die Wechselwirkungsenergien zwischen den Nucleinbasen und der Einfluss der R{\"u}ckgrats auf die Stabilit{\"a}t der Dimer in zwei separaten Schritten bestimmt. Im ersten Schritt wurde das R{\"u}ckgrat entfernt und die Schnittstellen mit Methylgruppen abges{\"a}ttigt. Die Wechselwirkungsenergie zwischen den Nucleinbasen wurde durch die Differenz der Energien des gesamten Systems und der Summe der Energien der einzelnen Nucleinbasen in der Geometrie des Dimers bestimmt. Aufgrund der durchgef{\"u}hrten Untersuchungen und die sich daraus ergebenen Korrelation der berechneten Stabilisierungsenergien mit der Schmelztemperatur konnte gezeigt werden, dass mit der vorgeschlagenen Methode eine verl{\"a}ssliche Beschreibung der PNA Systeme m{\"o}glich ist. F{\"u}r eine weitere Verbesserung des vorgestellten Modells bedarf es zus{\"a}tzliche R{\"o}ntgenstruktur- oder NMR-Experimente, die zur Strukturaufkl{\"a}rung der alpha-Alanyl-PNA Dimere entscheidend beitragen. Weitere detaillierte Daten {\"u}ber die Enthalpiebeitr{\"a}ge zur absoluten Energie der verschiedenen Komplexe w{\"a}ren sehr hilfreich, um die vorgestellte Methode zu best{\"a}tigen und zu verbessern. Diese Informationen k{\"o}nnten zum einen durch die Auswertung der Form der Schmelzkurve sowie durch Mikrokalorimetrie erhalten werden. F{\"u}r den Fall, dass die Vorhersagen durch die experimentellen Befunde best{\"a}tigt w{\"u}rden, k{\"o}nnte der Ansatz auf verwandte Systeme wie zum Beispiel beta-Alanyl-PNA, DNA oder RNA angewandt werden. Durch diese weiteren Informationen k{\"o}nnte unser Ansatz zus{\"a}tzlich durch die Ber{\"u}cksichtigung von dynamischen und/oder entropischen Effekte erweitert werden.}, subject = {Peptid-Nucleins{\"a}uren}, language = {en} } @phdthesis{Mladenovic2008, author = {Mladenovic, Milena}, title = {Theoretical Investigation into the Inhibition of Cystein Proteases}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-25763}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {Although known about and investigated since the late 1970's, the picture of the basic principles governing inhibitor strengths and the structure-activity relationships of the cysteine protease inhibition mechanism is still very incomplete. Computational approaches can be a very useful tool for investigating such questions, as they allow the inspection of single, specific effects in isolation from all others, in a manner very difficult to achieve experimentally. The ab initio treatments of such large systems like proteins are still not feasible. However, there is a vast number of computational approaches capable of dealing with protein structures with reasonable accuracy. This work presents a summary of theoretical investigations into cysteine protease cathepsin B using a range of methods. We have concentrated on the investigation of cysteine protease inhibition by epoxide- and aziridine-based inhibitors in order to obtain better insight into these important topics. Various model systems are simulated by means of pure quantum mechanical methods and by hybrid (QM/MM) methods. Both approaches provide a static picture. Dynamical effects are then accounted for by additional molecular dynamics (MD) simulations, using both classical and QM/MM MD approaches. The quantum mechanical approach was used to study very small model systems consisting only of the electrophilic warhead of the inhibitor (both substitituted and not) and molecular moieties simulating a very simplified protein active site (methylthiolate instead of Cys29 and methylimidazolium instead of His199 residue) and solvent surroundings (two waters or two ammonium ions, in combination with a continuum solvent model). Although simple, such a system provides a good description of the most important interactions involved in the inhibition reaction. It also allows investigation of the influence of the properties of the electrophilic warhead on the reaction rate. Beside the properties of the electrophilic warhead, the protein and solvent environment is also an important factor in the irreversible deactivation of the enzyme active site by the inhibitor. The non-covalent interactions of the inhibitor with the oxyanion hole and other subsites of the enzyme, as well as its interaction with the solvent molecules, need to be explicitly taken into account in the calculations, because of their possible impact on the reaction profile. As molecular modeling methods allow the treatment of such large systems, but lack the possibility of describing covalent interactions, our method of choice was the combined quantum mechanics/molecular modeling approach. By splitting the system into a smaller part that undergoes the bond cleavage/formation process and must be treated quantum mechanically, and a larger part, comprised of the rest of the protein, which could be treated using force fields, we managed to simulate the system at the desired precision. Our investigations concentrated on the role of His199 in the inhibition mechanism as well as on the structure-reactivity relationships between cysteine protease and various inhibitors, yielding new insight into the kinetics, regio- and stereospecificity of the inhibition. In particular, our calculations provide the following insights: i.) an explanation for the regioselectivity of the reaction, and original insight into which interactions affect the stereoselectivity; ii.) a clear model which explains the known structure-activity relationships and connects these effects with the pH-dependency of the inhibition; iii.) our computations question the generally accepted two-step model by showing that substituent effects accelerate the irreversible step to such an extent that the achievement of an equilibrium in the first step is doubtful; iv.) by way of theoretical characterizations of aziridine models, the reasons for similarities and differences in the mode of action of epoxide- and aziridine-based inhibitors are elucidated; and finally, v.) combining our results with experimental knowledge will allow rational design of new inhibitors. To account for dynamical effects as well, molecular dynamics (MD) computations were also performed. In these calculations the potential energy was computed at the force field level. The results not only supported and clarified the QM/MM results, but comparison with previous X-ray structures helped correct existing errors in the available geometrical models and resolved inconsistencies in the weighting of various factors governing the inhibition. In the work the first QM/MM MD calculations on the active site of the cysteine proteases are presented. In contrast to the MD simulations, these calculations used potential energies computed at the QM/MM-level. With the help of these computations we sought to address strongly disputed questions about the reasons for the existence of the active site ion pair and its role in the high activity of the enzyme.}, subject = {Quantenchemie}, language = {en} } @phdthesis{Arnone2007, author = {Arnone, Mario}, title = {Theoretical Characterization and Optimization of Photochemical Alkoxyl Radical Precursors}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-23815}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Oxygen-centered radicals are important intermediates in photobiological, mechanistic and synthetic studies. The majority of precursors of reactive oxyl radicals are labile and thus delicate to handle. Therefore N-(alkoxy)-pyridinethiones and N-(Alkoxy)-thiazolethiones have attracted attention as "mild'' photochemical source of alkoxyl radicals, in the last few years. A disadvantage of the pyridine compounds, is their sensibility to daylight. Despite of their similarities, both molecules behave surprisingly different, if photolyzed in the absence of trapping reagents. The pyridinethione compounds undergo highly efficient radical chain reactions under such conditions while the corresponding thiazolethiones react surprisingly sluggish and give rise to several unwanted side products. The properties of both compounds should be understood and optimized in the frame of this work. Additionally new compounds should be suggested that can also be applied in the photochemical alkoxyl radical generation. Some background information about the generation and application of alkoxyl radicals is provided in chapter 2. Electronic excitations and UV/vis spectroscopy together with a description of quantum chemical approaches that are able to calculate such phenomena are outlined in chapter 3. Chapter 4 deals with the description of the vertical excitation spectra. During the validation CASSCF, CASPT2, TD-DFT and RI-CC2 were tested with respect to their ability to describe the vertical excitations in both compounds. The CASPT2 approach gives accurate descriptions of the electronic excitation spectra of all compounds. The time-dependent DFT results are very sensitive on the choice of the functional and a validation of the results should be always done. On the basis of these computations the spectroscopic visible absorption bands of both compounds were assigned to a pi-->pi* transition in the thiohydroxamic acid functionality. In chapter 5 the mechanism of the thermally and the photochemically induced N,O homolysis in both compounds is unveiled. The near UV-induced N,O homolysis will start from the S2 state. The expected relaxation from the S2- to the S1-state and the dissociation process is expected to be very fast in the case of the thiazolethione compound. The potential surfaces of the pyridine compound in contrast point to a slower N,O bond dissociation. Due to the resulting faster dissociation process the excess energy which results from the photochemical activation is quenched only to small amounts. The maximal possible excess energy of the fragments is lower and a quenching is much more likely in the case of the pyridinethione compounds. This explaines the different reactivities of both compounds. For the also already successfully applied precursor system N-(alkoxy)-pyridineones the computed dissociation paths show courses that clearly predict a slow bond dissociation process. Chapter 6 deals with the tuning of the initial excitation wave length of the known pyridinethiones und thiazolethiones. In the first part the effects of substituents on the thiazolethione heterocycle was examined. The UV/vis spectra of 4 and 5 substituted thiazolethiones can be interpreted like the spectrum of the parent compound. The second part of chapter 6 deals with the identification of a substitution pattern on the pyridine heterocycle which induces a blue shift of the photo active band. The computations showed that electron rich and electron poor substituents result the same effects on the electronic excitation spectra. These substituent effects are additive, but the steric orientation of the substituents has to be taken into account. Chapter 7 describes a computer aided design of new alkoxyl radical precursors. Combining the advantages of both compounds the radical formation should be initiated by an irradiation with light at about 350 nm, and the amount of side products during the radical formation process should be small. To achieve this 18 test candidates were obtained by a systematic variation of the parent compound of the thiazolethione precursor. To identify the promising new precursor systems a screening of the lower electronic excitations of all resulting 18 systems was performed with TD-DFT. For promising systems the N,O or P,O dissociation paths, respectively, were analyzed according to the developed model. N-(methoxy)-azaphospholethione and N-(methoxy)-pyrrolethione seem to be the most promising candidates. The computations predict a strong absorption at about 350 nm respectively 320 nm. Due to the amounts of maximal excess energy and the shapes of the potential surfaces of the N,O bond dissociation paths their reactivity should resemble more the behavior of the pyridinethiones.}, language = {en} } @phdthesis{Geiger2004, author = {Geiger, Lars}, title = {The versatile use of Guanidiniocarbonylpyrroles : from self-assembly to peptide recognition}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9272}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Die vorliegende Arbeit gliedert sich in zwei Themenschwerpunkte. Ein supramolekulares Projekt beinhaltete die Entwicklung von neuen flexiblen, selbst-aggregierenden Zwitterionen als Bausteine f{\"u}r supramolekulare Polymere. In einem zweiten bioorganischem Teil bestand das Ziel darin, Rezeptoren f{\"u}r Aminos{\"a}uren und Dipeptide in Wasser zu entwickeln. Beide Projekte basieren auf dem Guanidiniocarbonylpyrrol als effizientes Bindungsmotiv f{\"u}r die Komplexierung von Carboxylaten in w{\"a}ssrigen L{\"o}sungen. Eine notwendige Voraussetzung f{\"u}r die Realisierung dieser Projekte war jedoch zun{\"a}chst die Entwicklung einer allgemeinen, effizienten und milden Synthese f{\"u}r Guanidiniocarbonylpyrrole. Die bei der zuvor verwendeten Methode aggressiven Reaktionsbedingungen und die problematische Aufreinigung verhinderten eine gr{\"o}ßere Anwendung dieses Bindungsmotivs in bioorganischen und supramolekularen Projekten. Im Rahmen dieser Arbeit gelang es mir erfolgreich eine neue Syntheseroute zu entwickeln. Hierbei wurde mono-tBoc-Guanidine mit dem Benzylester mittels PyBOP gekuppelt und nach Entsch{\"u}tzung der Benzylschutzgruppe wurde die zentrale Zwischenstufe f{\"u}r die weiteren Synthesen, die tBoc-gesch{\"u}tzte Guanidinocarbonylpyrrol-S{\"a}ure erhalten. Durch diese neuartige Synthese war es m{\"o}glich, eine Reihe von flexiblen Zwitterionen 3-6 herzustellen und deren Selbst-Aggregation und den Einfluß der Kettenl{\"a}nge und somit Flexibilit{\"a}t der Alkylkette auf Struktur und Stabilit{\"a}t der gebildeten Aggregate in L{\"o}sung sowie auch in der Gasphase zu untersuchen. In DMSO deuten NMR-Verd{\"u}nnungsreihen darauf hin, dass die flexiblen Zwitterionen mit n = 1, 3 und 5 oligomere Strukturen ausbilden. Im Falle von n = 1 werden hoch stabile helicale und Nanometer große Aggregate in der gebildet. In den Gasphasen-Studien wurde die Stabilit{\"a}t und Zerfallskinetik einer Reihe von Natriumaddukten der Dimere von n = 2, 3 und 5 untersucht. Dieses gelang durch die Methode der „infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry" (IRMPD-FT-ICR MS). Solche Studien erm{\"o}glichen m{\"o}glicherweise in Zukunft das gezielte Design von supramolekularen Bausteinen. Der bioorganische Teil meiner Arbeit setzte sich aus drei Einzelprojekten zusammen. So synthetisierte ich durch eine f{\"u}nfstufige Synthesesequenz vier neue Arginin-Analoga, die in Zukunft als Ersatz f{\"u}r Arginin in Peptide eingebaut werden k{\"o}nnen. Als Testreaktion f{\"u}r die Eignung dieser Verbindungen in einer Festphasenpeptidsynthese, wurde ein Tripetid Ala-AA1-Val (AA: Arginin-Analogon) mit einem eingebauten Arginin-Analogon erfolgreich hergestellt. In einem zweiten Projekt habe ich den Einfluß einer zus{\"a}tzlichen ionischen Wechselwirkung in unserem Bindungsmotiv untersucht. Dazu wurde ein zweifach-kationischer Rezeptor und der dreifach-geladenen Rezeptor synthetisiert und physikalisch-organisch ihre Bindungseigenschaften mit Hilfe von NMR-Titrationsexperimenten gegen eine Reihe von Aminos{\"a}uren untersucht. Der dreifach-kationische Rezeptor 11 zeigte hierbei herausragende Bindungseigenschaften und war um ca. den Faktor 100 besser als f{\"u}r die bisher bekannten Guanidiniocarbonylpyrrole. Die Assoziationskonstanten waren auch fast reinem Wasser mit bis zu Kass = 2000 noch bemerkenswert hoch. Im dritten Projekt habe ich einen de-novo entwickelten Rezeptor f{\"u}r C-terminale Dipeptide in einer beta-Faltblatt Struktur entwickelt.Dieser Rezeptor wurde mittels NMR and UV-Titrationen untersucht. In 40 \% Wasser/ 60 \% DMSO waren die Bindungskonstanten zu hoch um {\"u}berhaupt quantifiziert zu werden. Deshalb wurden die Bindungseigenschaften des Rezeptors mittels UV Titrationen in einer Mischung aus 90 \% Wasser mit 10 \% DMSO gegen eine Reihe von Dipeptiden und Aminos{\"a}uren getestet. Die Bindungsdaten zeigen, dass Rezeptor Dipeptide mit ausgezeichneten Bindungskonstanten (Kass > 10000 M-1) komplexiert. Im Gegensatz dazu bindet der Rezeptor 12 Aminos{\"a}uren um den Faktor zehn schlechter (Kass > 1000 M-1). Die Komplexstabilit{\"a}t nimmt hierbei in Abh{\"a}ngigkeit von der Seitenkette des Dipeptids in der Reihe Gly < Ala < Val zu, was sich mit der abnehmenden Flexibilit{\"a}t und zunehmenden Hydrophobizit{\"a}t der Seitenkette erkl{\"a}ren l{\"a}sst. Diese Eigenschaften machen den Rezeptor 12 zu dem besten bisher bekannten Dipeptidrezeptor in w{\"a}ssrigen L{\"o}sungen. Innerhalb meiner Arbeit gelang es mir somit, nicht nur eine essentiell wichtige, milde und effiziente Synthese f{\"u}r Guanidinocarbonylpyrrole zu entwickeln, sondern es gelang mir ebenso ein neues Bindungsmotiv f{\"u}r die Komplexierung von Aminos{\"a}uren in Wasser zu entwickeln. Zus{\"a}tzlich konnte noch der Dipeptidrezeptor erfolgreich synthetisiert und untersucht werden. Mit Bindungskonstanten f{\"u}r von Kass > 10000 M-1 ist er der derzeit beste Dipeptidrezeptor in w{\"a}ssriger L{\"o}sung.}, subject = {Guanidinderivate}, language = {en} } @phdthesis{Henn2004, author = {Henn, Julian}, title = {The electron density : a bridge between exact quantum mechanics and fuzzy chemical concepts}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9003}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Summary The nature of the chemical bond is a topic under constant debate. What is known about individual molecular properties and functional groups is often taught and rationalized by explaining Lewis structures, which, in turn, make extensive use of the valence concept. The valence concept distinguishes between electrons, which do not participate in chemical interactions (core electrons) and those, which do (single, double, triple bonds, lone-pair electrons, etc.). Additionally, individual electrons are assigned to atomic centers. The valence concept is of paramount success: It allows the successful planning of chemical syntheses and analyses, it explains the behavior of individual functional groups, and, moreover, it provides the "language" to think of and talk about molecular structure and chemical interactions. The resounding success of the valence concept may be misleading to forget its approximative character. On the other hand, quantum mechanics provide in principle a quantitative description of all chemical phenomena, but there is no discrimination between electrons in quantum mechanics. From the quantum mechanical point of view there are only indistinguishable electrons in the field of the nuclei, i.e., it is impossible to assign a given electron to a particular center or to ascribe a particular purpose to individual electrons. The concept of indistinguishability of micro particles is founded on the Heisenberg uncertainty relation, which states, that wavepackets diverge in the 6N dimensional phase space, such that individual trajectories can not be identified. Hence it is a deep-rooted and approved physical concept. As an introduction to the present work density partitioning schemes were discussed, which divide the total molecular density into chemically meaningful areas. These partitioning schemes are intimately related to either the concepts of bound atoms in a molecule (as in the Atoms In Molecules theory (AIM) according to Bader or as in the Hirshfeld partitioning scheme) or to the concept of chemical structure in the sense of Lewis structures, which divide the total molecular density into core and valence density, where the valence density is split up again into bonding and non-bonding electron densities. Examples are early and recent loge theories, the topological analysis by means of the Electron Localization Function (ELF), and the Natural Bond Orbital (NBO) approach. Of these partitioning schemes, the theories according to Bader (AIM), to Becke and Edgecomb (ELF) and according to Weinhold (NBO and Natural Resonance Theory, NRT), respectively, were reviewed in detail critically. Points of criticism were explicated for each of the mentioned theories. Since theoretically derived electron densities are to be compared to experimentally derived densities, a brief introduction into the theory of X-ray di®raction experiments was given and the multipole formalism was introduced. The procedure of density refinement was briefly discussed. Various suggestions for improvements were developed: One strategy would be the employment of model parameters, which are to a maximum degree mutually orthogonal, with the object of minimizing correlations among the model parameters, e.g., to introduce nodal planes into the radial functions of the multipole model. A further suggestion involves the guidance of the iterative refinement procedure by an extremum principle, which states, that when di®erent solutions to the least squares minimization problem are available with about the same statistical measures of quality and with about the same residual density, then the solution is to prefer, which yields a minimum density at the bond critical point (BCP) and a maximum polarity in terms of the ratio of distances between the BCP and the nuclei. This suggestion is based on the well known fact, that the bond polarity (in terms of the ratio of distances between the BCP and the respective nuclei) is underestimated in the experiment. Another suggestion for including physical constraints is the explicit consideration of the virial theorem, e.g., by evaluating the integration of the Laplacian over the entire atomic basins and comparing this value to zero and to the value obtained from the integration of the electron gradient field over the atomic surface. The next suggestion was to explicitly use the electrostatic theorem of Feynman (often also denoted as Hellmann-Feynman theorem), which states, that the forces onto the nuclei can be calculated from the purely classical electrostatic forces of the electron distribution and the nuclei distribution. For a stationary system, these forces must add to zero. This also provides an internal quality criterion of the density model. This can be performed in an iterative way during the refinement procedure or as a test of the final result. The use of the electrostatic theorem is expected to reduce significantly correlations among static density parameters and parameters describing vibrations, since it is a valuable tool to discriminate between physically reasonable and artificial static electron densities. All of these mentioned suggestions can be applied as internal quality criteria. The last suggestion is based on the idea to initiate the experimental refinement with a set of model parameters, which is, as much as possible close to the final solution. This can be achieved by performing periodic boundary conditions calculations, from which theoretically created files are obtained, which contain the Miller indices (h, k, l) and the respective intensity I. This file is used for a model parameter estimation (refinement), which excludes vibrations. The resulting parameters can be used for the experimental refinement, where, in a first step, the density parameters are fixed to determine the parameters describing vibrations. For a fine tuning, again the electrostatic theorem and the other above mentioned suggestions could be applied. Theoretical predictions should not be biased by the method of computation. Therefore the dependence of the density analyzing tools on the level of calculation (method of calculation/basis set) and on the substituents in complex chemical bonding situations were evaluated in the second part of the present work. A number of compounds containing formal single and double sulfur nitrogen bonds was investigated. For these compounds, experimental data were also available. The calculated data were compared internally and with the experimental results. The internal comparison was drawn with regard to questions of convergency as well as with regard to questions of consistency: The resulting molecular properties from NBO/NRT analyses were found to be very stable, when the geometries were optimized at the respective level of theory. This stability is valid for variations in the methods of calculation as well as for variations in the basis set. Only the individual resonance weights of the contributing Natural Lewis Structures differed considerably depending on the level of calculation and depending on the substituents. However, the deviations were in both cases to a large extent within a limit which preserves the descending order of the leading resonance structure weights. The resulting bond orders, i.e., the total, covalent and ionic bond order from NRT calculations, were not affected by the shift in the resonance weights. The analysis of the bond topological parameters resulted in a discrimination between insensitive parameters and sensitive parameters. The stable parameters do neither depend strongly on the method of calculation nor on the basis set. Only minor variation occurs in the numerical values of these parameters, when the level of calculation is changed or even when other functional groups (H, Me, or tBu) are employed, as long as the methods of calculation do not drop considerably below a standard level. The bond descriptors of the sulfur nitrogen bonds were found to be also stable with respect to the functional groups R = H, R = Me, and R = tBu. Stable parameters are the bond distance, the density at the bond critical point (BCP) and the ratio of distances between the BCP and the nuclei A and B, which varies clearly when considering the formal bond type. For very small basis sets like the 3-21G basis set, this characteristic stability collapses. The sensitive parameters are based on the second derivatives of the density with respect to the coordinates. This is in accordance with the well known fact, that the total second derivative of the density with respect to the coordinates is a strongly oscillating function with positive as well as negative values. A profound deviation has to be anticipated as a consequence of strong oscillations. lambda3, which describes the local charge depletion in the direction of the interaction line, is the most varying parameter. A detailed analysis revealed that the position of the BCP in the rampant edge of the Laplacian distribution is responsible for the sensitivity of the numerical value of lambda3 in formal double bonds. Since the slope of the Laplacian assumes very high values in its rampant edge, a tiny displacement of the BCP leads already to a considerable change in lambda3. This instability is not a failure of the underlying theory, but it yields de facto to a considerable dependence of sensitive bond topological properties on the method of calculation and on the applied basis sets. Since the total second derivative is important to judge on the nature of the bond in the AIM theory (closed shell interactions versus shared interactions), the changes in lambda3 can lead to differing chemical interpretations. The comparison of theoretically derived bond topological properties of various sulfur nitrogen bonds provides the possibility to measure the self consistency of this data set. All data sets clearly exhibit a linear correlation between the bond distances and the density at the BCP on one hand and between the bond distances and the Laplacian values at the BCP on the other hand. These correlations were almost independent of the basis set size. In this context, the linear regression has to be regarded exclusively as a descriptive statistics tool. There is no correlation anticipated a priori. The formal bond type was found to be readily deducible from the theoretically obtained bond topological descriptors of the model systems. In this sense, the bond topological properties are self consistent despite of the numerical sensitivity of the derivatives, as exemplified above. Often, calculations are performed with the experimentally derived equilibrium geometries and not with optimized ones. Applying this approach, the computationally costly geometry optimizations are saved. Following this approach the bond topological properties were calculated using very flexible basis sets and employing the fixed experimental geometry (which, of course, includes the application of tBu groups). Regression coe±cients similar to those from optimized geometries were obtained for correlations between bond distances and the densities at the BCP as well as for the correlation between bond distances and the Laplacian at the BCP, i.e. the approach is valid. However, the data points scattered less and the coe±cient of correlation was clearly increased when geometry optimizations were performed beforehand. The comparison between data obtained from theory and experiment revealed fundamental discrepancies: In the data set of bond topological parameters from the experiment, the behavior of only 2 out of 3 insensitive parameters was comparable to the behavior of the theoretically obtained values, i.e. theoretical and experimental bond distances as well as theoretical and experimental densities at the BCP correlate. From the theoretically obtained data it was easy to deduce the formal bond type from the position of the BCP, since it changed in a systematic manner. The respective experimentally obtained values were almost constant and did not change systematically. For the SN bonds containing compounds, the total second derivative assumes exclusively negative values in the experiment. Due to the different internal behavior, experimentally and theoretically sensitive bond topological values could not be compared directly. The qualitative agreement in the Laplacian distribution, however, was excellent. In the third and last part of this work, the application to chemical systems follows. Formal hypervalent molecules, i.e. molecules where some atoms are considered to hold more than 8 electrons in their valence shell, were investigated. These were compounds containing sulfur nitrogen bonds (H(NtBu)2SMe, H2C{S(NtBu)2(NHtBu)}2, S(NtBu)2 and S(NtBu)3) and a highly coordinated silicon compound. The set of sulfur nitrogen compounds also contained a textbook example for valence expansion, the sulfur triimide. For these molecules, experimental reference values were available from high resolution X-ray experiments. The experimental results were in the case of the sulfur triimide not unique. Furthermore, from the experimental bond topological data no definite conclusion about the formal bonding type could be drawn. The situation of sulfur nitrogen bonds in the above mentioned set of molecules was analyzed in terms of a geometry discussion and by means of a topological analysis. The methyl-substituted isolated molecules served as model compounds. For the interpretation of the bonding situation additional NBO/NRT calculations were preformed for the sulfur nitrogen compounds and an ELF calculation and analysis was performed for the silicon compound. The ELF analysis included not only the presentation and discussion of the ELF-isosurfaces (eta = 0.85), but also the investigation of populations of disynaptic valence basins and the percentage contributions to these populations of the individual atoms when the disynaptic valence basins are split into atomic contributions according to Bader's partitioning scheme. The question of chemical interest was whether hypervalency is present in the set of molecules or not. In the first case the octet rule would be violated, in the second case Pauling's verdict would be violated. While the concept of hypervalency is well established in chemistry, the violation of Pauling's verdict is not. The quantitative numbers of the sensitive bond topological values from theory and experiment were not comparable, since no systematic relationship between the experimentally and theoretically determined sensitive bond descriptors was found. However, the insensitive parameters are in good agreement and the qualitative Laplacian distribution is, with few exceptions, in excellent agreement. The formal bonding type was deduced from experimental and theoretical topological data by considering the number and shape of valence shell charge concentrations in proximity to the sulfur and nitrogen centers. The results from NBO/NRT calculations confirmed the findings. All employed density analyzing tools AIM, ELF and NBO/NRT coincided in describing the bonding situation in the formally hypervalent molecules as highly polar. A comparison and analysis of experimentally and theoretically derived electron densities led consistently to the result, that regarding this set of molecules, hypervalency has to be excluded unequivocally.}, subject = {Elektronendichtebestimmung}, language = {en} } @phdthesis{Kraus2020, author = {Kraus, Michael}, title = {The Conversion of Bifidobacterium adolescentis Sucrose Phosphorylase into a Polyphenol Transglucosidase via Structure-based Enzyme Engineering}, doi = {10.25972/OPUS-19247}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-192477}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {The initial goal was the conversion of Bifidobacterium adolescentis Sucrose Phosphorylase (BaSP) into a polyphenol glucosidase by structure based enzyme engineering. BaSP was chosen because of its ability to utilize sucrose, an economically viable and sustainable donor substrate, and transfer the glucosyl moiety to various acceptor substrates. The introduction of aromatic residues into the active site was considered a viable way to render it more suitable for aromatic acceptor compounds by reducing its polarity and potentially introducing π-π-interactions with the polyphenols. An investigation of the active site revealed Gln345 as a suitable mutagenesis target. As a proof of concept BaSP Q345F was employed in the glycosylation of (+)-catechin, (-)-epicatechin and resveratrol. The variant was selective for the aromatic acceptor substrates and the glucose disaccharide side reaction was only observed after almost quantitative conversion of the aromatic substrates. A crystal structure of BaSP Q345F in complex with glucose was obtained and it displayed an unexpected shift of an entire domain by 3.3 {\AA}. A crystal structure of BaSP D192N-Q345F, an inactive variant in complex with resveratrol-3-α-D-glucosid, the glucosylation product of resveratrol, synthesized by BaSP Q345F was solved. It proved that the domain shift is in fact responsible for the ability of the variant to glycosylate aromatic compounds. Simultaneously a ligand free crystal structure of BaSP Q345F disproved an induced fit effect as the cause of the domain shift. The missing link, a crystal structure of BaSP Q345F in the F-conformation is obtained. This does not feature the domain shift, but is in outstanding agreement with the wildtype structure. The domain shift is therefore not static but rather a step in a dynamic process. It is further conceivable that the domain shifted conformation of BaSP Q345F resembles the open conformation of the wild type and that an adjustment of a conformational equilibrium as a result of the Q345F point mutation is observed. An investigation into the background reaction, the formation of glucose-glucose disaccharides of BaSP Q345F and three further variants that addressed the same region (L341C, D316C-L341C and D316C-N340C) revealed the formation of nigerose by BaSP Q345F.}, subject = {Phosphorylase}, language = {en} } @phdthesis{Huegel2018, author = {H{\"u}gel, Markus}, title = {The control of nanomorphology in star-shaped mesogens}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-165321}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined.}, subject = {Fl{\"u}ssigkristall}, language = {en} } @phdthesis{Roos2021, author = {Roos, Markus}, title = {Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems}, doi = {10.25972/OPUS-23453}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-234537}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis.}, subject = {Fotokatalyse}, language = {en} } @phdthesis{Seitz2023, author = {Seitz, Florian}, title = {Synthesis, enzymatic recognition and antiviral properties of modified purine nucleosides}, doi = {10.25972/OPUS-31323}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313238}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Beyond the four canonical nucleosides as primary building blocks of RNA, posttranscriptional modifications give rise to the epitranscriptome as a second layer of genetic information. In eukaryotic mRNA, the most abundant posttranscriptional modification is N6-methyladenosine (m6A), which is involved in the regulation of cellular processes. Throughout this thesis, the concept of atomic mutagenesis was employed to gain novel mechanistic insights into the substrate recognition by human m6A reader proteins as well as in the oxidative m6A demethylation by human demethylase enzymes. Non-natural m6A atomic mutants featuring distinct steric and electronic properties were synthesized and incorporated into RNA oligonucleotides. Fluorescence anisotropy measurements using these modified oligonucleotides revealed the impact of the atomic mutagenesis on the molecular recognition by the human m6A readers YTHDF2, YTHDC1 and YTHDC2 and allowed to draw conclusions about structural prerequisites for substrate recognition. Furthermore, substrate recognition and demethylation mechanism of the human m6A demethylase enzymes FTO and ALKBH5 were analyzed by HPLC-MS and PAGE-based assays using the modified oligonucleotides synthesized in this work. Modified nucleosides not only expand the genetic alphabet, but are also extensively researched as drug candidates. In this thesis, the antiviral mechanism of the anti-SARS-CoV-2 drug remdesivir was investigated, which causes delayed stalling of the viral RNA-dependent RNA polymerase (RdRp). Novel remdesivir phosphoramidite building blocks were synthesized and used to construct defined RNA-RdRp complexes for subsequent studies by cryogenic electron microscopy (cryo-EM). It was found that the 1'-cyano substituent causes Rem to act as a steric barrier of RdRp translocation. Since this translocation barrier can eventually be overcome by the polymerase, novel derivatives of Rem with potentially improved antiviral properties were designed.}, subject = {Nucleins{\"a}uren}, language = {en} } @phdthesis{Qamar2012, author = {Qamar, Riaz-ul}, title = {Synthesis of functionalized molecular probes for bioorthogonal metabolic glycoengineering}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73378}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Biomolecules are difficult to investigate in their native environment. The vast complexity of cellular systems and seldom availability of chemical reactions compatible with the physiological milieu make it a challenging task. Bioorthogonal chemical reactions serve as a key to achieve selective ligation, whose components must react rapidly and selectively with each other under physiological conditions in the presence of the plethora of functionalities necessary to sustain life. In this dissertation, we focused on the synthesis of chemical reporters and probe molecules for bioorthogonal labeling through click reaction. Initially, sialic acid derivatives with a linker containing terminal alkyne functionality were synthesized. After the synthesis of azide derivatives of fluorescent dyes as counter partners, they were conjugated with sialic acids through Cu(I) catalyzed alkyne azide cycloaddition (CuAAC). The successful in vitro conjugation of Sia and fluorescent dyes was followed by metabolic tagging of human larynx carcinoma (HEp-2) and the carcinoma of Chinese hamster ovary (CHO­K1) with alkynated Sia that were subsequently ligated with fluorescein azide. Finally, the stained cells were subjected to fluorescent microscopy to obtain their images. To enable the click reaction compatible to in vivo applications, the reactivity of cyclooctyne was enhanced by two different approaches. In a first approach, following the Bertozzi's strategy, two fluorine atoms were introduced adjacent to the alkyne to lower the LUMO. In a second strategy the ring strain of cyclooctyne was attempted to be enhanced by the introduction of an amide group. In addition, glutarimide derivatives with free amino and carboxylic acid functional groups were synthesized by domino-Michael addition-cyclization-reaction.}, subject = {Click-Chemie}, language = {en} } @phdthesis{Buschmann2019, author = {Buschmann, Rachel Abigail}, title = {Synthesis of annulated pi-systems based on a tribenzotriquinacene core}, doi = {10.25972/OPUS-19349}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193491}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The aim of this work was the selective functionalisation of tribenzotriquinacene (TBTQ) in order to extend the aromatic system and tune the electronic properties. The synthesised molecules could be starting materials for a model system of a defective graphene fragment. The "triple cyclisation pathway" by Hopf et al. was adapted and fluorinated tribenzotriquinacenes were synthesised for the first time. Phenanthrene groups were also introduced in other model systems and the crystal structures of phenanthrene functionalised TBTQs were compared with the parent molecules. In addition, the arrangement of TBTQ and centro methyl functionalised TBTQ was investigated on a Ag(111) surface for the first time using scanning transmission microscopy (STM). Different arrangements were observed, depending on the coverage of the surface. The insights gained about the interaction between TBTQs as well as their synthesis provide a foundation for further work and potential applications as components in organic electronic devices.}, subject = {Triquinacenderivate}, language = {en} } @phdthesis{Schreck2018, author = {Schreck, Maximilian}, title = {Synthesis and Photophysics of Linear and Star-Shaped Oligomers of Squaraine Dyes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-174272}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {In this thesis, the synthesis and photophysics of a great variety of squaraine dyes are presented. This variety is based on four parent squaraines containing either indolenine or quinoline heterocycles. By a suitable choice of the donor and acceptor unit, the optical properties can already be adapted to the properties desired on the stage of the monomer. To promote a further derivatisation of these dyes, diverse functional groups are attached to the monomers using transition metal-catalysed C-C coupling reactions. However, this has to be preceded by the synthesis of bromine-functionalised derivatives as a direct halogenation of squaraine dyes is not feasible. Therefore, the halogen function is already introduced in precursor molecules giving rise to a molecular building block system containing bromine-, boronic ester-, and alkyne-functionalised monomer units, which pave the way to a plethora of squaraine oligomers and polymers. The indolenine homopolymer pSQB-1 as well as the corresponding small molecular weight oligomers dSQB-1 and tSQB were synthesized applying Ni-mediated Yamamoto and Pd-catalysed Suzuki coupling methodologies, respectively. The motivation for this project relied on the fundamental investigations by V{\"o}lker et al. on pSQB-V. A progressive red-shift of the lowest energy absorption maximum from the dimer to the polymer was observed in CHCl3 compared to the monomer. With increasing number of monomer units, the exciton coupling decreases from the dimer to the polymer. In addition, the shape of the absorption band manifold shows a strong dependence on the solvent, which was also observed by V{\"o}lker et al. J-type aggregate behavior is found in chlorinated solvents such as CHCl3 and DCM, whereas H-type aggregates are formed in acetone. Temperature-dependent absorption studies in PhCN reveals a reversible equilibrium of diverse polymer conformers, which manifests itself in a gradual change from H-aggregate behavior to a mixture with a more pronounced J-aggregate behavior upon raising the temperature. It isassumed that both characteristic aggregate bands correlate in borderline cases with two polymer structures which can be assigned to a zig-zag and a helical structure. As no experimental evidence for these structures could hitherto be provided by NMR, TD-DFT computations on oligomers (22-mers) can reproduce very closely the characteristic features of the spectra for the two conformational isomers. The subsequent chapters are motivated by the goal to influence the optical properties through a control of the superstructure and thus of the intramolecular aggregate formation. On the one hand, bulky groups are implemented in the 3-position of the indolenine scaffold to provoke steric repulsion and thus favoring J-aggregate behavior at the expense of helical arrangements. The resulting homopolymer pDiPhSQB bearing two phenyl groups per indolenine exhibits J-type aggregate behavior with red-shifted absorption maxima in all considered solvents which is explained to be caused by the formation of elongated zig-zag structures. Furthermore, single-crystal X-ray analysis of monomer DiPhSQB-2-Br2 reveals a torsion of the indolenine moieties as a consequence of steric congestion. The twist of the molecular geometry and the resulting loss of planarity leads to a serious deterioration of the fluorescence properties, however a significant bathochromic shift of ca. 1 200 cm-1 of the lowest absorption band was observed compared to parent SQB, which is even larger than the shift for dSQB-1 (ca. 1 000 cm-1). On the other hand, a partial stiffening of the polymer backbone is attempted to create a bias for elongated polymer chains. In this respect, the synthetic approach is to replace every second biarylaxis with the rigid transoid benzodipyrrolenine unit. Despite a rather low average degree of polymerization < 10, exclusively red-shifted absorption maxima are observed in all solvents used. In order to complete the picture of intramolecular aggregates through the selective design of H-aggregates, a squaraine-squaraine copolymer was synthesised containing the classic cisoid indolenine as well as the cisoid quinoline building block. Taking advantage of the highly structure directing self-assembly character of the quinoline moiety, the copolymer pSQBC indeed showes a broad, blue-shifted main absorption band in comparison with the monomer unit dSQBC. The shape of the absorption band manifold solely exhibited a minor solvent and temperature dependence indicating a persistent H-aggregate behaviour. Hence, as a proof of concept, it is shown that the optical properties of the polymers (H- and J-aggregate) and the corresponding superstructure can be inherently controlled by an adequate design of monomer precursors. The last chapter of this work deals, in contrast to all other chapters, with intermolecular aggregates. It is shown that the two star-shaped hexasquarainyl benzenes hSQA-1 and hSQA-2 exhibit a strong propensity for self-organisation. Concentration- and temperature-dependent studies reveal a great driving force for self-assembly in acetone. While the larger hSQA-2 instantaneously forms stable aggregates, the aggregates of hSQA-1 shows a pronounced kinetic stability. Taking advantage of the kinetic persistency of these aggregates, the corresponding kinetic activation parameters for aggregation and deaggregation can be assessed. The absorption spectra of both hexasquarainyl benzenes in the aggregated state reveal some striking differences. While hSQA-1 features an intensive, very narrow and blue-shifted absorption band, two red-shifted bands are observed for hSQA-2, which are closely located at the monomer absorption. The very small bandwidth of hSQA-1 are interpreted to be caused by exchange narrowing and pointed towards highly ordered supramolecular aggregates. The concentration-dependent data of the two hexasquarainyl benzenes can be fitted to the dimer-model with excellent correlation coefficients, yielding binding constants in excess of 10^6 M-1, respectively. Such high binding constants are very surprising, considering the unfavourable bulky 3,3-dimethyl groups of the indolenine units which should rather prevent aggregation. Joint theoretical and NMR spectroscopic methods were applied to unravel the supramolecular aggregate structure of hSQA-1, which is shown to consist of two stacked hexasquarainyl benzenes resembling the picture of two stacked bowls.}, subject = {Squaraine}, language = {en} } @phdthesis{Schaefer2018, author = {Sch{\"a}fer, Julian}, title = {Synthesis and Photophysical Investigation of Donor-Acceptor-Substituted meta- and para-Benzene Derivatives}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155007}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Im ersten Teil dieser Arbeit wurde die erfolgreiche Synthese einer Serie von bisTriarylamin (bisTAA) Verbindungen vorgestellt. Zum einen wurde das Substitutionmuster an der Benzol Br{\"u}ckeneinheit in Form einer meta- bzw. para-St{\"a}ndigkeit der Redoxzentren (pX bzw. mX), und zum anderen die energetische Lage der Br{\"u}ckeneinheit durch zwei elektronen-schiebende oder ziehende Substituenten X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Im Falle der meta-Serie wurden auch einige in 4,6-Position substituierte Verbinungen hergestellt (mX46). Die neutral Verbindungen wurden bez{\"u}glich ihrer elektrochemischen und photophysikalischen Eigenschaften untersucht. Durch Oxidation konnten die gemischt valenten (MV), kationischen bisTAA-Verbindungen erzeugt werden. Der thermisch induzierte Lochtransfer (HT) wurde durch temperatur-abh{\"a}ngige ESR-Spektroskopie untersucht. W{\"a}hrend die HT-Rate k und HT-Barriere ΔG in mX unbeeinflusst von den Substituenten X sind, steigen gleichzeitig k und ΔG in der pX-Serie mit zunehmenden Elektonenschub von X an. Diese zun{\"a}chst widerspr{\"u}chliche Beobachtung konnte durch einen ansteigenden Einfluss von L{\"o}sungsmitteleffekten und dadurch resultierend, einer zus{\"a}tzlichen effektiven Barriere erkl{\"a}rt werden. Der optisch induzierte Lochtransfer wurde mittels UV/Vis/NIR-Spektroskopie untersucht. Die pX-Serie zeigte eine Zuhname der elektronischen Kopplung V und dementsprechende eine Abnahme von ΔG, mit Anstieg des elektonenschiebenden Charakters von X. F{\"u}r mX war eine spektroskopische Bestimmung dieser Parameter nicht m{\"o}glich. Die mX46-Serie zeigte ein intermedi{\"a}res Verhalten, wobei MV-Verbindungen mit stark elektronenschiebenden X eine {\"a}hnliche hohe Kopplungen wie pX aufwiesen, was mit Hilfe von DFT-Rechnungen bez{\"u}glich der Molek{\"u}lorbitale erkl{\"a}rt werden konnte. Im zweiten Teil dieser Arbeit wurde die Synthese einer Serie von Verbindungen mit Triarylamin (TAA) als Donor und Naphthalindiimid (NDI) als Akzeptor vorgestellt. Auch hier wurde zum einen das Substitutionmuster an der Benzol-Br{\"u}ckeneinheit in Form einer meta- bzw. para-St{\"a}ndigkeit der Redoxzentren (pXNDI bzw. mXNDI) variieiet und die energetische Lage der durch X (mit X = OMe, Me, Cl, CN, NO2) in 2,5-Position variiert. Außerdem wurde die in 4,6-Position substituierte Verbinungen mOMe46NDI hergestellt. Alle Verbindungen wurden bez{\"u}glich ihrer elektochemischen und photophysikalischen Eigenschaften untersucht. Die Elektronentransferprozesse der Ladungsseparierung (CS) und Ladungsrekombination (CR) dieser Verbindungen sollten mittels transienter Absorptionsspektroskopie (TA) in Toluol untersucht werden. F{\"u}r die Nitroverbindungen p-/mNO2NDI war dies nicht m{\"o}glich, da sich diese unter Bestrahung zersetzten. Die CR von pXNDI waren nicht im ns-Bereich detektierbar, weshalb sich auf die mXNDI-Serie (mit X = OMe-CN) konzentriert wurde. Die CS wurde mittels fs-TA untersucht. Nach optischer Anregung konnte die Bildung eines CS-Zustandes detektiert werden, dessen Bildungsgeschwindigkeit hin zu elektronen-ziehenden Substituenten X steigt. Die CR wurde mit ns-TA untersucht. Sie findet in der Marcus invertierten Region statt und zeichnet sich wird durch ein biexponentialles Abklingverhaten, was durch ein Singulet-Triplett Gleichgewicht im CS-Zustand zustande kommt, aus. Durch Anlegen eines externen Magnetfeldes ließ sich das Abklingverhalten entscheidend ver{\"a}ndern und es konnte eine Singulett-Triplett Aufspaltung nachgewiesen werden. Dieser Befund konnte weiterhin durch Simulation der Abklingkurven best{\"a}tigt werden. In beiden Teilen dieser Arbeit konnte ein entscheidender Einfluss der Benzolbr{\"u}cke auf die auftretenden Ladungstransferprozesse gezeigt werden. F{\"u}r den HT in Grundzustand der MV bisTAA Verbindungen, sowie der ET im angeregten Zustand der Donor-Akzeptor-Verbindungen, wurden die h{\"o}chsten ET-Raten f{\"u}r die para-Serien pX und pXNDI gefunden, w{\"a}hrend die meta-Serien mX und mXNDI deutlch kleine Transferraten aufwiesen. In beiden Studien zeigten die meta46-Verbindungen mX46 und mOMeNDI46 ein intermedi{\"a}res Verhalten, zwischen denen der para- und meta-Verbindungen.}, subject = {Synthese}, language = {en} } @phdthesis{Ceymann2016, author = {Ceymann, Harald}, title = {Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136850}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance.}, subject = {Squaraine}, language = {en} } @phdthesis{Toksabay2022, author = {Toksabay, Sinem}, title = {Synthesis and on surface self assembly properties of pi extended tribenzotriquinacenes}, doi = {10.25972/OPUS-24573}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-245734}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Tribenzotriquinacene (TBTQ) is a polycyclic aromatic framework with a particularly rigid, C3v symmetrical, bowl-shaped core bearing three mutually fused indane wings. It has been discussed as a defect center for a nanographene by Kuck and colleagues. Therefore, extended TBTQ structures are promising models for saturated defect structures in graphene and graphene like molecules and could be used to investigate the role of defects for the electronic properties of graphene. With this motivation, three different pi-extended TBTQ derivatives have been synthesized in this work. Several different Scholl reaction conditions were tried to obtain fully annulated product of hexaphenyl substituted TBTQ. The desired benzannulated TBTQ derivative could not be obtained due to unfavourable electron density in the respective positions of the molecule and increased reactivity of the bay position of the precursor. As an another method for benzannulation is the on-surface synthesis of graphene flakes and can be carried out using electron beams e.g. in a tunneling microscope (STM). According to our previous research, the parent system TBTQ and centro-methyl TBTQ on silver and gold surfaces showed that the gas phase deposition of these molecules gives rise to the formation of highly ordered two-dimensional assemblies with unique structural features. This shows the feasibility for the formation of defective graphene networks starting from the parent structures. Therefore, the same deposition technique was used to deposit Me-TBTQ(OAc)3Ph6, and investigate the molecular self-assembly properties directly on the surface of Cu (111). In summary, the substrate temperature dependent self-assembly of Me-TBTQ(OAc)3Ph6 molecules on Cu(111), shows the following evolution of orientations. At room temperature, molecules form dimers, which construct a higher-coverage honeycomb lattice. Furthermore, one of the acetyl group located in the bay positions of the TBTQ core is cleaved and the remaining two induce the metal-molecule interaction. It was presumed that by increasing the temperature to 393 K, the remaining acetyl and methyl groups would beeliminated from the molecular structure.In addition, the smaller TBTQ-Ph6 molecules preferably lie flat on Cu(111) crystal and allowing the molecules to settle into a C3-symmetry and form a dense hexagonal structure.}, subject = {Triquinacenderivate}, language = {en} } @phdthesis{Dobrawa2004, author = {Dobrawa, Rainer Anton}, title = {Synthesis and characterization of terpyridine-based fluorescent coordination polymers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-10367}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Complexation properties of 2,2':6',2''-terpyridine (tpy) have been studied with a series of first row transition metal ions by UV-vis, 1H NMR and isothermal titration calorimetry and ƒ´H values for the tpy complexation processes have been determined. These studies reveal that Zn2+ is the best suited metal ion for the reversible coordination of the terpyridine ligand. Thus, supramolecular coordination polymerization of perylene bisimide fluorophores containing terpyridine functionalities have been investigated by using Zn2+ as metal ion. The formation of the dimeric complexes in the case of monotopic model comounds and coordination polymerization of ditopic functional building blocks have been confirmed by 1H NMR studies. The optical properties of dimeric and polymeric complexes have been investigated by UV-vis and fluorescence spectroscopy. The Zn2+ coordination to the terpyridine unit does not effect the advantageous fluorescence properties of perylene bisimide moieties. The reversibility of the formation of coordination polymers has been established by 1H NMR and additionally by DOSY NMR and fluorescence anisotropy measurements. Coordination polymer strands can be visualized by atomic force microscopy (AFM), which also reveals the formation of an ordered monolayer film at higher concentration. The average polymer length has been determined by AFM to 15 repeat units, which correlates well with the value estimated by 1H NMR to >10 repeat units.}, subject = {Terpyridinderivate <2}, language = {en} } @phdthesis{SanchezNaya2023, author = {S{\´a}nchez Naya, Roberto}, title = {Synthesis and Characterization of Dye-Containing Covalent Organic Frameworks}, doi = {10.25972/OPUS-28899}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-288996}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The present thesis adress the synthesis and characterization of novel COFs that contain dye molecules as integral components of the organic backbone. These chromophore-containing frameworks open new research lines in the field and call for the exploration of applications such as catalysis, sensing, or in optoelectronic devices. Initially, the fabrication of organic-inorganic composites by the growth of DPP TAPP COF around functionalized iron oxide nanoparticles is reported. By varying the ratio between inorganic nanoparticles and organic COFs, optoelectronic properties of the materials are adjusted. The document also reports the synthesis of a novel boron dipyrromethene-containing (BODIPY) COF. Synthesis, full characterization and the scope of potential applications with a focus on environmental remediation are discussed in detail. Last, a novel diketopyrrolopyrrole-containing (DPP) DPP-Py-COF based on the combination of DDP and pyrene building blocks is presented. The very low bandgap of these materials and initial investigations on the photosensitizing properties are discussed.}, subject = {Organische Chemie}, language = {en} } @phdthesis{Dehm2010, author = {Dehm, Volker Christoph}, title = {Synthesis and Characterization of an Oligo(Phenylene Ethynylene)-Based Perylene Bisimide Foldamer}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-53211}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {The present work is part of the currently only rudimentary understanding of the structure-property relationships in the self-assembly of pi-conjugated organic molecules. Such structures may reveal favorable photophysical and semiconducting properties due to the weak non-covalent pi-pi interactions between the monomer units. The specific mutual orientation of the dyes is known to evoke individual functional properties for the condensed matter, however, the related electronic processes are still not well-understood and further enhancements of functional properties are seldom triggered by rational design. The pi-pi self-assembly structures of perylene bisimide (PBI) dyes are promising, versatile materials for organic electronic devices and have been elected for this thesis as an archetype aggregate system to investigate the dye-dye interactions in more detail. In cooperation with experts in the field of spectroscopy and theory the development of reliable routines towards a better understanding of the origins of the functional properties may be feasible, and, on a longer time-line, such knowledge may enable optimization of functional organic materials. Having designed such structures entailed the challenge of developing feasible synthesis strategies, and to actually generate the targeted molecules by synthesis. Several synthesis approaches were conducted until finally a perylene bisimide foldamer was obtained based on a Sonogashira co-polymerization reaction. After purification and enrichment of the larger-sized species by means of semi-preparative gel permeation chromatography (GPC) the average size of an octamer (8500 Da) species was determined by analytical GPC. The low polydispersity index (PD) of 1.1 is indicative of a sharp size distribution of the oligomers. This average size was confirmed by performing diffusion ordered NMR spectroscopy (DOSY). Furthermore, MALDI-TOF mass analysis substantiated the structural integrity of the co-polymerization product. Solvent-dependent UV/vis spectroscopic investigations demonstrated that intramolecular PBI  aggregates are reversibly formed, indicating that this oligomer is able to fold and unfold in the intended manner upon changing external conditions. In the unfolded states, the PBI moieties are closely arranged due to the short OPE bridges (< 2.4 nm), which is expressed by an exciton coupling interaction of the dyes and therefore the characteristic monomer absorption pattern of the PBI chromophore cannot be obtained in the unfolded states. More interestingly, the folded state revealed a pronounced aggregate spectrum of the PBIs, however, striking differences in the shape of the absorption spectrum compared to our previously investigated PBI self-assembly were obtained.}, subject = {Perylenbisdicarboximide 35 ° C). The dioxa analogues containing only two positive charges had lower enhancement of the melting temperature of DNA/RNA (ΔTm values between 3 and 30 ° C). A similar trend has been observed in the fluorimetric titrations. The spermine-functionalized PBI dyes showed high binding con-stants (log Ks = 9.2 - 9.8), independently of the used polynucleotides. In contrast, the dioxa ana-logues displayed smaller binding constants (log Ks = 6.5 - 7.9) without any correlation between binding affinity and binding strength of the PBI dyes and the applied polynucleotides. The CD-spectroscopic measurements revealed significant differences in the binding properties of the dyes with DNA/RNA. They were dependent on the steric hindrance of the amino acid residues at the imide position and their configuration on one side and the grooves properties of ds-DNA/RNA on the other side. The spectroscopic results confirmed the formation of excitonically coupled PBI dimers in the minor groove of ds-DNA and the major groove of ds-RNA. Depending on the se-quence, the grooves of the polynucleotides provide different amount of space for embedding molecules. The guanine amino groups protrude into the minor groove of the polynucleotide poly(dG-dC)2 increasing the steric hindrance, which is not the case for poly(dA-dT)2. Molecular modeling studies showed that the PBI dimers penetrate deeper into the groove of poly(dA-dT)2 due to the absence of the steric hindrance, in comparison to the groove of poly(dG-dC)2 (see Figure 85).}, subject = {Perylentetracarbons{\"a}urederivate}, language = {en} } @phdthesis{Noll2023, author = {Noll, Niklas}, title = {Second Coordination Sphere Engineering in Macrocyclic Ruthenium Water Oxidation Catalysts}, doi = {10.25972/OPUS-30533}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-305332}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {About 2.4 billion years ago, nature has fundamentally revolutionized life on earth by inventing the multi-subunit protein complex photosystem II, the only molecular machine in nature that catalyzes the thermodynamically demanding photosynthetic splitting of water into oxygen and reducing equivalents. Nature chose a distorted Mn4CaO5 cluster as catalyst, better known as oxygen-evolving complex (OEC), thus recognizing the need for transition metals to achieve high-performance catalysts. The curiosity has always driven mankind to mimic nature's achievements, but the performance of natural enzymes such as the oxygen-evolving complex in photosystem II remain commonly unmatched. An important role in fine-tuning and regulating the activity of natural enzymes is attributed to the surrounding protein domain, which facilitates substrate preorganization within well-defined nanoenvironments. In light of growing energy demands and the depletion of fossil fuels, the unparalleled efficiency of natural photosynthesis inspires chemists to artificially mimic its natural counterpart to generate hydrogen as a 'solar fuel' through the light-driven splitting of water. As a result, significant efforts have been devoted in recent decades to develop molecular water oxidation catalysts based on earth-abundant transition metals and the discovery of the Ru(bda) (bda: 2,2' bipyridine-6,6'-dicarboxylate) catalyst family enabled activities comparable to the natural OEC. Similar to the natural archetypes, the design of homogeneous catalysts that interplay judiciously with the second coordination sphere of the outer ligand framework proved to be a promising concept for catalyst design. In this present thesis, novel supramolecular design approaches for enzyme like activation of substrate water molecules for the challenging oxidative water splitting reaction were established via tailor-made engineering of the secondary ligand environment of macrocyclic Ru(bda) catalysts.}, subject = {Katalyse}, language = {en} } @phdthesis{Berberich2012, author = {Berberich, Martin}, title = {Rylene Bisimide-Diarylethene Photochromic Systems for Non-Destructive Memory Read-out}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-73517}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Diese Doktorarbeit zeigt deutlich verbesserte aus Rylenbisimiden und Diarylethenen aufgebaute, photochrome Systeme f{\"u}r das nicht-destruktive Auslesen von Fluoreszenz. Dabei wird die Fluoreszenz der Emittereinheit durch photoinduzierten Elektronentransfer nur zu einer isomeren Form des Photochromes gel{\"o}scht. Die Triebkraft f{\"u}r den Fluoreszenz-l{\"o}schenden Elektronentransfer wurde mittels Rehm-Weller-Gleichung berechnet. Die erhaltenen Systeme erf{\"u}llen die notwendigen Anforderungen f{\"u}r ein nicht-destruktives Auslesen in einem auf Schreiben, Auslesen und L{\"o}schen basierenden fluoreszierenden Datenspeicher.}, subject = {Photochromie}, language = {en} } @phdthesis{Schulze2016, author = {Schulze, Marcus}, title = {Ruthenium Complexes as Water Oxidation Catalysts and Photosensitizers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142454}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {In der vorliegenden Arbeit werden Aspekte der photokatalytischen Wasseroxidationsreaktion behandelt. Der erste Themenschwerpunkt der Dissertation besch{\"a}ftigt sich mit einem supramolekularen Makrozyklus, der drei Rutheniummetallzentren enth{\"a}lt. Dieser neuartige Katalysator zeigt eine sehr hohe katalytische Aktivit{\"a}t und gew{\"a}hrt neue Einblicke in den Mechanismus der Wasseroxidationsreaktion. Des Weiteren wird auf die mit Licht interagierenden Komponenten der photokatalytischen Wasseroxidation eingegangen. Hierbei haben sich azabenz-anellierte Perylenderivate als vielseitige Farbstoffklasse herausgestellt. Die Kombination dieser Farbstoffe mit Metallkomplexen liefert metallorganische Verbindungen, die als Photosensibilisatoren eingesetzt werden k{\"o}nnen.}, subject = {Farbstoff}, language = {en} } @phdthesis{Amthor2005, author = {Amthor, Stephan}, title = {Redox properties of Bis-Triarylamines and ligand properties of Thianthrenophane}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15916}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {The one electron oxidation potential of ten TAAs with all permutations of Cl , OMe- and Me-substituents in the three p-positions were determined by CV. The half wave potential of the first oxidation wave correlates linearly with the number of Cl- and OMe-substituents. AM1-CISD derived values of the absorption energies are in good agreement with the experiments but differ strongly for the oscillator strengths as well as for neutral compounds and their corresponding mono radical cations. The small solvent dependence of the experimental UV/Vis spectra in CH2Cl2 and MeCN reflects a minor charge transfer character of the electronic transitions. The UV/Vis/NIR spectra of the series of TAAs and their corresponding radical cations and the AM1 computations reveal that even small substituents may lead to strong symmetry breaking and to a modified electronic structure. The spectroscopic properties of a series of four bis-TAA donor-bridge-donor X-B-X dimers, composed of two asymmetric TAA chromophores (monomers) were investigated. UV/vis-, fluorescence and transient absorption spectra were recorded and compared with those of the corresponding X-B monomers. The excited states of the dimers are described as MV states which show, depending on the chemical nature of the bridge, a varying amount of interactions. It was found that superradiant emission only proceeds in the case of weak and medium coupling. Whether the first excited state potential energy surface of the dimers is a single minimum or a double minimum potential depends on the solvent polarity and the electronic coupling. In the latter case, the dimer relaxes in a symmetry broken CT state. The [2.2]paracyclophane bridged dimer is an example for a weakly coupled system, because the spectroscopic behavior is very similar to the corresponding p xylene monomer. In contrast, anthracene as well as p-xylene bridges mediate a stronger coupling and reveal a significant cooperative influence on the optical properties. A series of [2.2]paracylophane bridged bis-TAA MV radical cations X-B-X+ were analyzed by a GMH three-level model which takes two transitions into account: the IV-CT band and the bridge band. From the GMH analysis, one can conclude that the [2.2]paracyclophane moiety is not the limiting factor which governs the intramolecular charge transfer. The electronic interactions are of course smaller than direct conjugation but from the order of magnitude of the couplings of the [2.2]paracyclophane MV species it can be assumed that this bridge is able to mediate significant through-space and through-bond interactions. From the exponential dependence of the electronic coupling V between the two TAA localized states on the distance r between the two redox centers, it was inferred that the HT proceeds via superexchange mechanism. The analysis reveals that even significantly longer conjugated bridges should still mediate significant electronic interactions, because the decay constant of a series of conjugated MV species is small. The absorption properties of a series of bis-TAA-[2.2]paracyclophane dications X+-B-X+ were presented. The localized and the CT transitions of these dications are explained and analyzed by an exciton coupling model which also considers the photophysical properties of the monomeric TAA radical cations. Together with AM1-CISD calculated transition moments, experimental transition moments and transition energies of the bis-TAA dications were used to calculate electronic couplings by a GMH approach. These couplings are a measure for interactions of the excited MV CT states. The modification of the diabatic states reveals similarities of the GMH three-level model and the exciton coupling model. Comparison of the two models shows that the transition moment between the excited mixed-valence states of the dimer equals the dipole moment difference of the ground and the excited bridge state of the corresponding monomer. Thianthrenophane (1) has a cavity which offers enough room to potentially enable endohedral coordination to small ions or molecules. For the complexation of silver(I) perchlorate, the complex stability constants of thianthrenophane logK1=5.45 and of thianthrene logK2=9.16 were determined by UV/Vis titration. Single competition transport experiments with ten metal salts demonstrate a very high selectivity of thianthrenophane as a carrier for silver(I) and a distinctly higher transport rate compared to carriers such as thianthrene and 14-ane-S4. Although the X-ray crystal structure analysis of the polymeric [Ag(1)]ClO4 shows an exohedral coordination to silver(I), the formation of an endohedral [Ag(1)]+ complex is suggested to be the explanation for the unusual carrier selectivity of silver(I) by 1 in bulk liquid membrane.}, subject = {Triarylamine}, language = {en} } @phdthesis{Schlund2007, author = {Schlund, Sebastian}, title = {Quantifying Non-covalent Interactions - Rational in-silico Design of Guanidinium-based Carboxylate Receptors}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-24388}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Die nat{\"u}rlichen Vorbilder effektiver Anionenrezeptoren sind Enzyme, welche oftmals Arginin als entscheidende Aminos{\"a}ure in der Bindungstasche tragen. Die positiv geladenene Guanidiniumgruppe, wie sie in der Seitenkette von Arginin vorkommt, ist daher das zentrale Strukturmerkmal f{\"u}r viele k{\"u}nstliche Anionenrezeptoren. Im Jahre 1999 gelang es Schmuck und Mitarbeitern eine neue Klasse von Guanidinium-basierten Oxoanionenrezeptoren zu entwickeln, die Carboxylate sogar in w{\"a}ssrigen Medien binden k{\"o}nnen. Die Bindungsmodi der 2-(Guanidiniocarbonyl)-1H-pyrrole basieren auf einer Kombination von einzeln betrachtet schwachen nicht-kovalenten Wechselwirkungen wie Ionenpaarbildung und multiplen Wasserstoffbr{\"u}ckenbindungen zwischen k{\"u}nstlichem Rezeptor und Substrat. Durch Substitution einer Carboxylatgruppe in Position 5 des Pyrrolringes erh{\"a}lt man ein zwitterionisches Derivat welches sich in Wasser mit einer Assoziationskonstante von sch{\"a}tzungsweise 170 M-1 zu einzelnen Dimeren zusammenlagert (Dimer 1). Um das Strukturmotiv hinsichtlich einer noch effektiveren Anionenbindung weiter verbessern zu k{\"o}nnen, ist es daher von großem Interesse, die verschiedenartigen intermolekularen Wechselwirkungen zwischen den beiden monomeren Einheiten von Dimer 1 zu quantifizieren. Vor diesem Hintergrund wurden verschiedene theoretische ab initio Studien durchgef{\"u}hrt, um die Einfl{\"u}sse von intrinsischen Eigenschaften sowie von Solvenseffekten auf die Stabilit{\"a}t sich selbst zusammenlagernden Dimeren aufzukl{\"a}ren. In Kapitel 4.1 wurden die molekularen Wechselwirkungen im Dimer 1 durch Vergleich mit verschiedenen „Knock-out" Analoga untersucht. In diesen Analoga wurden einzelne Wasserstoffbr{\"u}ckenbindungen durch Substitution von Wasserstoffdonoren mit Methylengruppen oder Etherbr{\"u}cken ausgeschaltet. Es konnte gezeigt werden, dass die Anwendung eines vereinfachten Kontinuum-Solvensmodells nicht ausreicht, die absoluten Energien der „Knock-out" Analoga in stark polaren L{\"o}sungsmitteln vorherzusagen, jedoch k{\"o}nnen die berechneten Trends Auskunft {\"u}ber die relativen Stabilit{\"a}ten geben. In Kapitel 4.2 wurde die strukturelle {\"A}hnlichkeit von Arginin mit Struktur 1 ausgenutzt, um die Abh{\"a}ngigkeit der St{\"a}rke der Dimerisierung von der Flexibilit{\"a}t der molekularen Struktur eingehender zu untersuchen. In Kapitel 4.2.1 wurden neue globale Minimumsstrukturen des kanonischen und zwitterionischen Arginins in der Gasphase bestimmt. Dies geschah mit Hilfe von umfangreichen kraftfeldbasierten Konformationssuchen in Verbindung mit ab initio Strukturoptimierungen der energetisch niedrigsten Konformere. Die meisten der neu identifizierten Minimumskonformere sowohl des zwitterionischen als auch des kanonischen Tautomers zeigten geometrische Anordnungen mit bis dahin unbekannten gestapelten Orientierungen der endst{\"a}ndigen Gruppen. Es wurde letztendlich eine neuartige globale Minimumsstruktur (N1) gefunden, welche eine um mehr als 8 kJ mol-1 niedrigere Energie besitzt als die bislang ver{\"o}ffentlichten Konformere. Die gleiche Strategie f{\"u}r das Auffinden von energetischen Minimumskonformeren, wie sie bereits f{\"u}r das Arginin Monomer benutzt wurde, wurde auch im Falle der Dimere von Arginin verwendet. Im Gegensatz zu vorhergehenden theoretischen Untersuchungen ist die neue globale Minimumsstruktur ungef{\"a}hr 60 kJ mol-1 stabiler und weist ebenfalls eine gestapelte Orientierung der Guanidinium- und Carboxylatgruppen auf. Der Einfluss der Rigidit{\"a}t auf die Dimerstabilit{\"a}t wurde durch Berechnungen eines k{\"u}nstlich versteiften Arginin Dimersystems bewiesen. Die hohe Bindungsaffinit{\"a}t des Dimers 1 ergibt sich daher zu etwa 50\% aus der Rigidit{\"a}t der Monomere, welche jegliche intramolekulare Stabilisierung verhindert. Um Vorschl{\"a}ge f{\"u}r ein verbessertes Carboxylatbindungsmotiv machen zu k{\"o}nnen, wurden in Kapitel 4.3 neuartige Strukturmotive mit ver{\"a}nderten Ringsystemen auf DFT Niveau untersucht. Die direkte Abh{\"a}ngigkeit der Dimerisierungsenergie von einem zunehmenden Dipolmoment wurde durch verschiedene anellierte Ringstrukturen bewiesen. Der Einfluss der Delokalisierung in den Monomeren auf die Dimerisierungsenergie wurde durch Ver{\"a}nderung der Elektronenstruktur von elektronisch entkoppelten Biphenylenen untersucht. Es konnte gezeigt werden, dass die Carbonylfunktion haupts{\"a}chlich f{\"u}r eine gute Pr{\"a}organisation verantwortlich ist, wohingegen der Effekt auf die Azidit{\"a}t eine geringere Bedeutung besitzt. Im letzten Kapitel wurden Kooperativit{\"a}tseffekte in supramolekularen Systemen untersucht. Als Modellsysteme dienten hierbei Adenosin-Carbons{\"a}ure-Komplexe, deren berechnete NMR Verschiebungen mit experimentellen Niedrigtemperatur-NMR-Studien verglichen wurden. Wir konnten zeigen, dass nur durch die Verwendung von schwingungsgemittelten NMR Verschiebungen die experimentelle Protonenverschiebung reproduziert werden kann, welche unter Tieftemperaturbedingungen im Austauschregime von Wasserstoffbr{\"u}ckenbindungen erhalten wurde.}, subject = {nicht-kovalente Wechselwirkungen}, language = {en} } @phdthesis{MufusamaKoySita2019, author = {Mufusama Koy Sita, Jean-Pierre}, title = {Quality Assessment of Antimalarial Medicines Sold in the Democratic Republic of the Congo and Phytochemical Investigations on a Congolese Ancistrocladus Liana}, doi = {10.25972/OPUS-19238}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-192382}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Nowadays, the management of infectious diseases is especially threatened by the rapid emergence of drug resistance. It has been suggested that the medicine quality assurance combined with good medication adherence may help to reduce this impendence. Moreover, the search for new antimicrobial agents from medicinal plants is strongly encouraged for the exploration of alternatives to existing therapies. In this context, the present work focused on both the quality evaluation of commercialized antimalarial medicines from the Democratic Republic of the Congo and on the phytochemical investigations of a Congolese Ancistrocladus species.}, subject = {Antimalariamittel}, language = {en} } @phdthesis{Shao2012, author = {Shao, Changzhun}, title = {Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-69298}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers.}, subject = {Farbstoff}, language = {en} } @phdthesis{HechtgebWagener2019, author = {Hecht [geb. Wagener], Reinhard Johannes}, title = {Processing and Characterization of Bulk Heterojunction Solar Cells Based on New Organic n-Type Semiconductors}, doi = {10.25972/OPUS-16138}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161385}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {This thesis established the fabrication of organic solar cells of DA dye donors and fullerene acceptors under ambient conditions in our laboratory, however, with reduced power conversion efficiencies compared to inert conditions. It was shown that moisture had the strongest impact on the stability and reproducibility of the solar cells. Therefore, utilization of robust materials, inverted device architectures and fast fabrication/characterization are recommended if processing takes place in air. Furthermore, the dyad concept was successfully explored in merocyanine dye-fullerene dyads and power conversion efficiencies of up to 1.14 \% and 1.59 \% were measured under ambient and inert conditions, respectively. It was determined that the major drawback in comparison to comparable BHJ devices was the inability of the dyad molecules to undergo phase separation. Finally, two series of small molecules were designed in order to obtain electron transport materials, using the acceptor-core-acceptor motive. By variation of the acceptor units especially the LUMO levels could be lowered effectively. Investigation of the compounds in organic thin film transistors helped to identify promising molecules with electron transport properties. Electron transport mobilities of up to 7.3 × 10-2 cm2 V-1 s-1 (ADA2b) and 1.39 × 10-2 cm2 V-1 s-1 (AπA1b) were measured in air for the ADA and AπA dyes, respectively. Investigation of selected molecules in organic solar cells proved that these molecules work as active layer components, even though power conversion efficiencies cannot compete with fullerene based devices yet. Thus, this thesis shows new possibilities that might help to develop and design small molecules as substitutes for fullerene acceptors.}, subject = {Heterosolarzelle}, language = {en} } @phdthesis{Mahl2023, author = {Mahl, Magnus}, title = {Polycyclic Aromatic Dicarboximides as NIR Chromophores, Solid-State Emitters and Supramolecular Host Platforms}, doi = {10.25972/OPUS-23462}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-234623}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The present thesis introduce different synthetic strategies towards a variety of polycyclic aromatic dicarboximides (PADIs) with highly interesting and diverse properties. This included tetrachlorinated, tetraaryloxy- and tetraaryl-substituted dicarboximides, fused acceptor‒donor(‒acceptor) structures as well as sterically shielded rylene and nanographene dicarboximides. The properties and thus the disclosure of structure‒property relationships of the resulting dyes were investigated in detail among others with UV‒vis absorption spectroscopy, fluorescence spectroscopy, cyclic voltammetry and single crystal X-ray analysis. For instance, some of the fused and substituted PADIs offer strong absorption of visible and near infrared (NIR) light, NIR emission and low-lying LUMO levels. On the contrary, intriguing optical features in the solid-state characterize the rylene dicarboximides with their bulky N-substituents, while the devised sterically enwrapped nanographene host offered remarkable complexation capabilities in solution.}, subject = {Organische Chemie}, language = {en} } @phdthesis{Chen2006, author = {Chen, Zhijian}, title = {pi-Stacks Based on Self-Assembled Perylene Bisimides : Structural, Optical, and Electronic Properties}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-19940}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {As a traditional industrial pigment, perylene bisimide (PBI) dyes have found wide-spread applications. In addition, PBI dyes have been considered as versatile and promising functional materials for organic-based electronic and optic devices, such as transistors and solar cells. For these novel demands, the control of self-organization of this type of dye and the investigation of the relationship between the supramolecular structure and the relevant optical and electronic properties is of great importance. The objective of this thesis focuses on gaining a better understanding of structural and functional properties of pi-stacks based on self-assembling PBIs. Studies include the synthesis and characterization of new functional PBI dyes, their aggregation in solution, in liquid crystalline state and on surfaces, and their fluorescence and charge transport properties. An overview of the formation, thermodynamics and structures of pi-stacks of functional pi- conjugated molecules in solution and in liquid crystalline phases is given in Chapter 2. Chapters 3 and 4 deal with the pi-pi aggregates of new, highly fluorescent PBIs without core-substituents. In Chapter 3, the self-assembly of a PBI with tridodecylphenyl substituents at imide N atoms both in solution and condensed phase has been studied in great detail. In condensed state, the dye exhibits a hexagonal columnar liquid crystalline (LC) phase as confirmed by DSC, OPM and X-ray diffraction analysis. The columnar stacking of this dye has been further confirmed by atomic force microscopy (AFM) where single columns could be well resolved The charge transport properties this dye have been investigated by pulse radiolysis-time resolved microwave conductivity (PR-TRMC) measurements. To shed more light on the nature of the pi-pi interaction of the unsubstituted PBIs, solvent depend aggregation properties have been investigated in Chapter 4. The studies are further extended from core-unsubstituted PBIs to core-substituted ones (Chapter 5 and 6). In Chapter 5, a series of highly soluble and fluorescent core-twisted PBIs that bear the same trialkylphenyl groups at the imide positions but different bay-substituents and were synthesized. These compounds are characterized by distortions of the perylene planes with dihedral angles in the range of 15-37° according to crystallographic data and molecular modeling studies. In contrast to the extended oligomeric aggregates formed for planar unsubstituted PBIs, this family of dyes formed discrete pi-pi-stacked dimers in apolar methylcyclohexane as concentration-dependent UV/Vis measurements and VPO analysis revealed. The Gibbs free energy of dimerization can be correlated with the twist angles of the dyes linearly. In condensed state, several of these PBIs form luminescent rectangular or hexagonal columnar liquid crystalline phases with low isotropization temperatures. The core-twisting effect on semiconducting properties has been examined in Chapter 6. In this chapter, a comparative study of the electrochemical and the charge transport properties of a series of non-substituted and chlorine-functionalized PBIs was performed. While Chapters 3-6 focus on one-component dye systems, Chapter 7 explored the possibility of a supramolecular engineering of co-aggregates formed by hydrogen-bonded 2:1 and 1:1 complex of oligo(p-phenylene vinylene)s (OPVs) and PBIs. Covalently linked donor-acceptor dye arrays have been prepared for comparison. Concentration and temperature-dependent UV/Vis spectroscopy revealed all hydrogen-bonded and covalent systems form well-ordered J-type aggregates in methylcyclohexane. With these hydrogen-bonded OPV-PBI complexes, fibers containing p-type and n-type molecules can be prepared on the nano-scale (1-20 nm). For the 2:1 OPV-PBI hydrogenbonded arrays hierarchically assembled chiral superstructures consisting of left-handed helical pi-pi co-aggregates (CD spectroscopy) of the two dyes that further assemble into right-handed nanometer-scale supercoils in the solid state (AFM study) have been observed. All of these well-defined OPV-PBI assemblies presented here exhibit photoinduced electron transfer on sub-ps timescale, while the electron recombination differs for different systems.Thus, it was suggested that such assemblies of p- and n-type semiconductors might serve as valuable nanoscopic functional units for organic electronics.}, subject = {Perylenderivate}, language = {en} } @phdthesis{Zhang2012, author = {Zhang, Guoliang}, title = {Phytochemical Research on Two Ancistrocladus Species, Semi-Synthesis of Dimeric Naphthylisoquinoline Alkaloids, and Structure Optimization of Antitumoral Naphthoquinones}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-72734}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Plant-derived natural products and their analogs continue to play an important role in the discovery of new drugs for the treatment of human diseases. Potentially promising representatives of secondary metabolites are the naphthylisoquinoline alkaloids, which show a broad range of activities against protozoan pathogens, such as plasmodia, leishmania, and trypanosoma. Due to the increasing resistance of those pathogens against current therapies, highly potent novel agents are still urgently needed. Thus, it is worthy to discover new naphthylisoquinoline alkaloids hopefully with pronounced bioactivities by isolation from plants or by synthesis. The naphthylisoquinoline alkaloids are biosynthetically related to another class of plant-derived products, the naphthoquinones, some of which have been recently found to display excellent anti-multiple myeloma activities without showing any cytotoxicities on normal blood cells. Multiple myeloma still remains incurable, although remissions may be induced with co-opted therapeutic treatments. Therefore, more potent naphthoquinones are urgently required, and can be obtained by isolation from plants or by synthesis. In detail, the results in this thesis are listed as follows: 1) Isolation and characterization of naphthylisoquinoline alkaloids from the stems of a Chinese Ancistrocladus tectorius species. Nine new naphthylisoquinoline alkaloids, named ancistectorine A1 (60), N-methylancistectorine A1 (61), ancistectorine A2 (62a), 5-epi-ancistectorine A2 (62b), 4'-O-demethylancistectorine A2 (63), ancistectorine A3 (64), ancistectorine B1 (65), ancistectorine C1 (66), and 5-epi-ancistrolikokine D (67) were isolated from the Chinese A. tectorius and fully characterized by chemical, spectroscopic, and chiroptical methods. Furthermore, the in vitro anti-infectious activities of 60-62 and 63-66 have been tested. Three of the metabolites, 61, 62a, and 62b, exhibited strong antiplasmodial activities against the strain K1 of P. falciparum without showing significant cytotoxicities. With IC50 values of 0.08, 0.07, and 0.03 μM, respectively, they were 37 times more active than the standard chloroquine (IC50 = 0.26 μM). Moreover, these three compounds displayed high antiplasmodial selectivity indexes ranging from 100 to 3300. According to the TDR/WHO guidelines, they could be considered as lead compounds. In addition, seven alkaloids, 69-74 (structures not shown here), were isolated from A. tectorius that were known, but new to the plant, together with another fourteen known compounds (of these, only the structures of the three main alkaloids, 5a, 5b, and 78 are shown here), which had been previously found in the plant. The three metabolites ancistrocladine (5a), hamatine (5b), and (+)-ancistrocline (78) were found to show no or moderate activities against the MM cell lines. 2) Isolation and characterization of naphthylisoquinoline alkaloids from the root bark of a new, botanically yet undescribed Congolese Ancistrocladus species. An unprecedented dimeric Dioncophyllaceae-type naphthylisoquinoline alkaloid, jozimine A2 (84), as first recognized by G. Bauckmann from an as yet undescribed Ancistrocladus species, was purified and characterized as part of this thesis. Its full structural assignment was achieved by spectroscopic and chiroptical methods, and further confirmed by an X-ray diffraction analysis, which had never succeeded for any other dimeric naphthylisoquinoline alkaloids before. Structurally, the dimer is composed of two identical 4'-O-demethyldioncophylline A halves, coupled through a sterically hindered central axis at C-3',3'' of the two naphthalene moieties. Pharmacologically, jozimine A2 (84) showed an extraordinary antiplasmodial activity (IC50 = 1.4 nM) against the strain NF54 of P. falciparum. Beside jozimine A2 (85), another new alkaloid, 6-O-demethylancistrobrevine C (84), and four known ones, ancistrocladine (5a), hamatine (5b), ancistrobrevine C (86), and dioncophylline A (6) were isolated from the Ancistrocladus species, the latter in a large quantity (~500 mg), showing that the plant produces Ancistrocladaceae-type, mixed-Ancistrocladaceae/Dioncophyllaceae-type, and Dioncophyllaceae-type naphthyl- isoquinoline alkaloids. Remarkably, it is one of the very few plants, like A. abbreviatus, and A. barteri, that simultaneously contain typical representatives of all the above three classes of alkaloids. 3) Semi-synthesis of jozimine A2 (85), 3'-epi-85, jozimine A3 (93) and other alkaloids from dioncophylline A (6). The dimeric naphthylisoquinoline alkaloids, jozimine A2 (85) and 3'-epi-85, constitute rewarding synthetic targets for a comparative analysis of their antiplasmodial activities and for a further confirmation of the assigned absolute configurations of the isolated natural product of 85. They were semi-synthesized in a four-step reaction sequence from dioncophylline A (6) in cooperation with T. B{\"u}ttner. The key step was a biomimetic phenol-oxidative dimerization at C-3' of the N,O-dibenzylated derivative of 89 by utilizing Pb(OAc)4. This is the first time that the synthesis of such an extremely sterically hindered (four ortho-substituents) naphthylisoquinoline alkaloid - with three consecutive biaryl axes! - has been successfully achieved. A novel dimeric naphthylisoquinoline, jozimine A3 (93), bearing a 6',6''-central biaryl axis, was semi-synthesized from 5'-O-demethyldioncophylline A (90) by a similar biomimetic phenol-oxidative coupling reaction as a key step, by employing Ag2O. HPLC analysis with synthetic reference material of 3'-epi-85 and 93 for co-elution revealed that these two alkaloids clearly are not present in the crude extract of the Ancistrocladus species from which jozimine A2 (85) was isolated. This evidences that jozimine A2 (85) is very specifically biosynthesized by the plant with a high regio- and stereoslectivity. Remarkably, the two synthetic novel dimeric naphthylisoquinoline alkaloids 3'-epi-85 and 93 were found to display very good antiplasmodial activities, albeit weaker than that of the natural and semi-synthetic product 85. Additionally, the two compounds 3'-epi-85 and 93 possessed high or moderate selectivity indexes, which were much lower than that of 85. However, they can still be considered as new lead structures. Two unprecedented oxidative products of dioncophylline A, the diastereomeric dioncotetralones A (94a) and B (94b), were synthesized from dioncophylline A (6) in a one-step reaction. Remarkably, the aromatic properties in the "naphthalene" and the "isoquinoline" rings of 94a and 94b are partially lost and the "biaryl" axis has become a C,C-double bond, so that the two halves are nearly co-planar to each other, which has never been found among any natural or synthetic naphthylisoquinoline alkaloid. Their full structural characterization was accomplished by spectroscopic methods and quantum-chemical CD calculations (done by Y. Hemberger). The presumed reaction mechanism was proposed in this thesis. In addition, one of the two compounds, 94a, exhibited a highly antiplasmodial activity (IC50 = 0.09 μM) with low cytotoxicity, and thus, can be considered as a new promising lead structure. Its 2'-epi-isomer, 94b, was inactive, evidencing a significant effect of chirality on the bioactivity. Of a number of naphthylisoquinoline alkaloids tested against the multiple-myeloma cell lines, the three compounds, dioncophylline A (6), 4'-O-demethyldioncophylline A (89), and 5'-O-demethyldioncophylline A (90) showed excellent activities, even much stronger than dioncoquinones B (10), C (102), the epoxide 175, or the standard drug melphalan. 4) Isolation and characterization of bioactive naphthoquinones from cell cultures of Triphyophyllum peltatum. Three new naphthoquinones, dioncoquinones C (102), D (103), and E (104), the known 8-hydroxydroserone (105), which is new to this plant, and one new naphthol dimer, triphoquinol A (107), were isolated from cell cultures of T. peltatum in cooperation with A. Irmer. Dioncoquinone C (102) showed an excellent activity against the MM cells, very similar to that of the previously found dioncoquinone B (10), without showing any inhibitory effect on normal cells. The other three naphthoquinones, 103105, were inactive or only weakly active. 5) Establishment of a new strategy for a synthetic access to dioncoquinones B (10) and C (102) on a large scale for in vivo experiments and for the synthesis of their analogs for first SAR studies. Before the synthesis of dioncoquinone B (10) described in this thesis, two synthetic pathways had previously been established in our group. The third approach described here involved the preparation of the joint synthetic intermediate 42 with the previous two routes. The tertiary benzamide 135 was ortho-deprotonated by using s-BuLi/TMEDA, followed by transmetallation with MgBr2▪2Et2O, and reaction with 2-methylallyl bromide (139). It resulted in the formation of ortho-allyl benzamide 140, which was cyclized by using methyl lithium to afford the naphthol 42. This strategy proved to be the best among the established three approaches with regard to its very low number of steps and high yields. By starting with 136, this third strategy yielded the related bioactive natural product, dioncoquinone C (102), which was accessed by total synthesis for the first time. To identify the pharmacophore of the antitumoral naphthoquinones, a library of dioncoquinone B (10) and C (102) analogs were synthesized for in vitro testing. Among the numerous naphthoquinones tested, the synthetic 7-O-demethyldioncoquinone C (or 7-O-hydroxyldioncoquinone B) (145), constitutes another promising basic structure to develop a new anti-MM agent. Furthermore, preliminary SAR results evidence that the three hydroxy functions at C-3, C-5, and C-6 are essential for the biological properties as exemplarily shown through the compounds 10, 102, and 145. All other mixed OH/OMe- or completely OMe-substituted structures were entirely inactive. By a serendipity the expoxide 175 was found to display the best anti-MM activity of all the tested isolated metabolites from T. peltatum, the synthesized naphthoquinones, and their synthetic intermediates. Toxic effects of 175 on normal cells were not observed, in contrast to the high toxicities of all other epoxides. Thus, the anti-MM activity of 175 is of high selectivity. The preliminary SAR studies revealed that the 6-OMe group in 175 is required, thus differed with the above described naphthoquinones (where 6-OH is a requisite in 10, 102, and 145), which evidenced potentially different modes of action for these two classes of compounds. 6) The first attempted total synthesis of the new naturally occurring triphoquinone (187a), which was recently isolated from the root cultures of T. peltatum in our group. A novel naphthoquinone-naphthalene dimer, 187a (structure shown in Chapter 10), was isolated in small quantities from the root cultures of T. peltatum. Thus, its total synthesis was attempted for obtaining sufficient amounts for selected biotestings. The key step was planned to prepare the extremely sterically hindered (four ortho-substituents) binaphthalene 188 by a coupling reaction between the two 2-methylnaphthalene derivatives. Test reactions involving a system of two simplified 2-methylnaphthylboron species and 2-methylnaphthyl bromide proved the Buchwald ligand as most promising. The optimized conditions were then applied to the two true - highly oxygenated - coupling substrates, between the 2-methylnaphthylboron derivatives 210, 211, 213, or 214 and the 2-methylnaphthyl iodides (or bromides) 215 (206), 215 (206), 212 (205), or 212 (205), respectively. Unfortunately, this crucial step failed although various bases and solvent systems were tested. This could be due to the high electron density of the two coupling substrates, both bearing strongly OMOM/OMe-donating function groups. Therefore, a more powerful catalyst system or an alternative synthetic strategy must be explored for the total synthesis of 187a. 7) Phytochemical investigation of the Streptomyces strain RV-15 derived from a marine sponge. Cyclodysidins A-D (216-219), four new cyclic lipopeptides with a- and ß-amino acids, were isolated from the Streptomyces strain RV15 derived from a marine sponge by Dr. U. Abdelmohsen. Their structures were established as cyclo-(ß-AFA-Ser-Gln-Asn-Tyr-Asn-Ser-Thr) by spectroscopic analysis using 2D NMR techniques and CID-MS/MS in the course of this thesis. In conclusion, the present work contributes to the discovery of novel antiplasmodial naphthylisoquinoline alkaloids and antitumoral naphthoquinones, which will pave the way for future studies on these two classes of compounds.}, subject = {Ancistrocladus}, language = {en} } @phdthesis{Mueller2011, author = {M{\"u}ller, Christian}, title = {Physical Properties of Chromophore Functionalized Gold Nanoparticles}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-57657}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {n this work the synthesis and analysis of chromophore functionalized spherical gold nanoparticles is presented. The optical, electrochemical and spectroelectrochemical properties of these hybrid materials are furthermore studied. The work therefore is divided into two parts. The first part deals with triarylamine and PCTM-radical functionalized gold nanoparticles. The focus thereby was on the synthesis and on the investigations of chromophore-chromophore interactions and gold core-chromophore interactions. The chromopores, especially triarylamines, were attached to the gold core via different bridging units and were studied with optical and electrochemical methods. The purity and dimensions of the nanoparticles was determined by 1H-NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), TGA, XPS and STEM. Furthermore a cyclic voltammetry technique was used to determine the composition of the particles via the Randles-Sevcik equation. An analysis of these parameters led to a model of a sea urchin-shaped nanoparticle. Optical measurements of the particles revealed an anisotropic absorption behavior of the triarylamine units due to gold core-chromophore interaction. However this behavior depends strongly on the relative orientation of the transition dipole moment of the chromophore to the gold surface and the distance of the chromophore to the surface. Hence, the anisotropic behavior was exclusively detected in the spectra of the Au-Tara1 particles. The short and rigid pi-conjugated bridging unit thereby facilitates this gold core-chromophore interaction. It was shown from electrochemical investigations that the triarylamine units can be chemically reversibly oxidized to the triarylamine monoradical cation. Furthermore, the measurements revealed a strong interligand triarylamine-triarylamine interaction which was only seen for the Au-Tara1 particles. The long pi-conjugated bridging units of the Au-Tara2 and Au-Tara3 particles as well as the aliphatic bridging unit of Au-Tara4 prevent any detectable interligand interactions. One may conclude that both the gold core-chromophore and the interligand triarylamine-triarylamine interaction depend on the length and the rigidity of the bridging unit. The electron transfer behavior of the triarylamine units adsorbed onto the gold core was additionally studied via spectroelectrochemical (SEC) measurements which are able to reveal weaker interactions. The investigations of Au-Tara1 and Au-Tara2 revealed a significant strong coupling between neighboring triarylamine units which is due to through-space intervalence interactions. This behavior was not detected for Au-Tara3 or for Au-Tara4. The SEC analysis also revealed that these observed interligand interactions depend on the length and the rigidity of the bridging unit. Thus, the systematic variation of the bridging unit gave a basic insight in the optical and electrochemical properties of triarylamines, located in the vicinity of a gold nanoparticle. The second part of this work aimed at the synthesis of new molecules, denoted as SERS-markers, for immuno SERS applications. For this purpose, the SERS-markers were designed to have a Raman-active unit and a thiol group for chemisorptions to Au/Ag nanoshells. In cooperation with the group of Schl{\"u}cker (University of Osnabr{\"u}ck) the SERS-markers were absorbed onto Au/Ag nanoshells, denoted as SERS-labels, and characterized. The SERS spectra of the SERS-labels exhibited intense and characteristic SERS-signals for each marker. For immuno SERS investigations SEMA3 was functionalized with a hydrophilic end unit. This marker was adsorbed onto an Au/Ag nanoshell and encapsulated with silica. An anti-p63 antibody was bound to the silica surface in order to generate a SERS-labeled antibody for the detection of the tumor suppressor p63 in benign prostate. Immuno-SERS imaging of prostate tissue incubated with SERS-labeled anti-p63 antibodies demonstrated the selective detection of p63 in the basal epithelium. The results show the potential of the method for the detection of several biomolecules in a multiplexing SERS experiment.}, subject = {Gold}, language = {en} } @phdthesis{Riese2019, author = {Riese, Stefan}, title = {Photophysics and Spin Chemistry of Donor-Acceptor substituted Dipyrrinato-Metal-Complexes}, doi = {10.25972/OPUS-18022}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-180228}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {In this thesis, the photophysics and spin chemistry of donor-photosensitizer-acceptor triads were investigated. While all investigated triads comprised a TAA as an electron donor and a NDI as an electron acceptor, the central photosensitizers (PS) were different chromophores based on the dipyrrin-motif. The purity and identity of all target compounds could be confirmed by NMR spectroscopy, mass spectrometry and elemental analysis. The first part of the work dealt with dipyrrinato-complexes of cyclometalated heavy transition metals. The successful synthesis of novel triads based on Ir(III), Pt(II) and Pd(II) was presented. The optical and electrochemical properties indicated charge separation (CS), which was confirmed by transient absorption (TA) spectroscopy. TA-spectroscopy also revealed that the process of CS is significantly slower and less efficient for the triads based on Pt(II) and Pd(II) than for the analogous Ir(III) triads. This is mostly due to a much more convoluted reaction pathway, comprising several intermediate states before the formation of the final charge separated state (CSS2). On the other hand, CSS2 exhibits long lifetimes which are dependent on the central metal ion. While the Ir(III) triads show lifetimes of about 0.5 µs in MeCN, the Pt(II) and Pd(II) analogues show lifetimes of 1.5 µs. The magnetic field effect on the charge recombination (CR) kinetics of CSS2 was investigated by magnetic field dependent ns-TA spectroscopy and could be rationalized based on a classical kinetic scheme comprising only one magnetic field dependent rate constant k±. The behavior of k± shows a clear separation of the coherent and incoherent spin interconversion mechanisms. While the coherent spin evolution is due to the isotropic hyperfine coupling with the magnetic nuclei of the radical centers, the incoherent spin relaxation is due to a rotational modulation of the anisotropic hyperfine coupling tensor and is strongly dependent on the viscosity of the solvent. This dependence could be used to measure the nanoviscosity of the oligomeric solvent pTHF, which was found to be distinctly different from its macroviscosity. The second part of the work dealt with bisdipyrrinato complexes and their bridged porphodimethenato (PDM) analogues. Initially, the suitability of the different chromophores for the use as PS in donor-acceptor substituted triads was tested by a systematic investigation of their steady state and transient properties. While the PDM-complex of Zn(II) and Pd(II) exhibited promising characteristics such as a high exited state lifetime and relatively intense emission, the purely organic parent PDM and the non-bridged bisdipyrrinato-Pd(II) complex were less suitable. The difference between the two Pd(II) complexes could be explained by a structural rearrangement of the non-bridged complex which results in a non-emissive metal centered triplet state with disphenoidal geometry. This rearrangement is prevented by the dimethylmethylene-bridges in the bridged analogue resulting in higher phosphorescence quantum yields and excited state lifetimes. With the exception of the Zn(II)PDM-complex, the synthesis of novel donor acceptor substituted triads could be realized for all desired central chromophores. They were investigated equivalently to the cyclometalated triads described in the first part. The steady state properties indicate a stronger electronic coupling between the subunits due to the lack of unsaturated bridges between the donor and the central chromophore. Photoinduced CS occurs in all investigated triads. Due to the low exited state lifetimes of the central chromophores, CSS is formed less efficiently for the triads based on the unbridged Pd(II)-complex as well as the purely organic PDM. In the triad based on the bridged Pd(II) complex, the CR of CSS2 is faster than its formation resulting in low intermediate concentrations. For its elongated analogue, this is not the case and CSS2 can be observed clearly. Although the spin-chemistry of the triads based on bisdipyrrinato-Pd(II) and porphodimethenato-Pd(II) is less well understood, first interpretations of the magnetic field dependent decay kinetics gave results approximately equivalent to those obtained for the cyclometalated triads. Furthermore, the MFE was shown to be useful for the investigation of the quantum yield of CS and the identity of the observed CSSs. In both parts of this work, the influence of the central photosensitizer on the photophysics and the spin chemistry of the triads could be shown. While the process of CS is directly dependent on the PS, the PS usually is not directly involved in the final CSSs. None the less, it can still indirectly affect the CR and spin chemistry of the CSS since it influences the electronic coupling between donor and acceptor, as well as the geometry of the triads.}, subject = {Charge-transfer-Komplexe}, language = {en} }