@phdthesis{Woetzel2019, author = {W{\"o}tzel, Dagmar}, title = {Wirksame Umsetzung strategischer Entscheidungen in profitorientierten Unternehmen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-176243}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Die Logik der bisher erforschten und beschriebenen Management- und F{\"u}hrungstheorien m{\"u}ssen sich im Zeitalter der Digitalisierung weiterentwickeln. Die urspr{\"u}ngliche Forschungsfrage nach einer wirksamen Implementierung von strategischen Entscheidungen passt nicht mehr zur Realit{\"a}t von disruptiven Ver{\"a}nderungen in der sogenannten VUCA Welt (Volatile, uncertain, complex, ambiguous). Die Arbeit ist mutig und wertvoll, weil sie die L{\"u}cke zwischen neuen Entwicklungen in der Praxis und fehlenden umfassenden Theoriekonzepten in den Management-, F{\"u}hrungs- und Organisationswissenschaften offenlegt und zu schließen hilft. Der erste Teil der Arbeit fasst die aktuellen Erkenntnisse rund um strategische Entscheidungsfindung in Unternehmen, globale Megatrends als Rahmenbedingung und Change-Management als Umsetzungshilfe zusammen. Die Schlussfolgerung aus dieser holistischen Betrachtung ist, dass die Forschungsfrage r{\"u}ckw{\"a}rts gerichtet die Realit{\"a}t des 20. Jahrhunderts adressiert und f{\"u}r das Zeitalter der Digitalisierung keine hilfreiche Antwort bietet. Vielmehr geht es um die weiter entwickelte Forschungsfrage, wie anpassungsf{\"a}hige Organisationen entwickelt und gepflegt werden k{\"o}nnen. Solche Organisationen {\"u}berleben disruptive Ver{\"a}nderungen nicht nur irgendwie, sondern sind so gestaltet, dass sie diese nutzen, um immer wieder neue Antworten auf sich entwickelnde Kundenbed{\"u}rfnisse und in der internen Organisation zu finden. Diese anpassungsf{\"a}hige oder adaptive Organisation hat f{\"u}nf wesentliche Dimensionen, die im zentralen Teil der Arbeit beleuchtet werden. Alle Themen entwickeln sich derzeit laufend weiter, so dass es noch keine letztg{\"u}ltige Antwort gibt welche Methoden sich durchsetzen werden. Im Sinne eines holistischen Transformationsmanagements gibt das letzte Kapitel Hinweise auf die Herangehensweise, um die eigene Organisation in ihrer Anpassungsf{\"a}higkeit weiter zu entwickeln. Die gr{\"u}ndliche Diskussion einer F{\"u}lle von konzeptionellen Ans{\"a}tzen in Verbindung mit einer bemerkenswerten Erfahrung der Autorin erlaubt es, die auftretende Problemstellung profunder anzugehen als bei einer rein akademischen Herangehensweise.}, language = {de} } @techreport{Stanka2023, type = {Working Paper}, author = {Stanka, Hans}, title = {Autonomy Reconsidered: Conceptualising a Phenomenon on the Verges of Self-Government and Self-Governance}, issn = {2698-2684}, doi = {10.25972/OPUS-32077}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-320771}, pages = {28}, year = {2023}, abstract = {For decades autonomy has been utilised as a concept in various social sciences, like sociology, political science, law and philosophy. Certain concepts of autonomy have always reflected the needs of the respective disciplines that made use of the term, but also ever infringed on the interpretation of autonomy in other disciplines. Most notably, conceptualisations of international and constitutional law have found their way into bordering sciences, like political science. The result: a legal positivist view prevailing in the conceptualisations of autonomy within political and administrative sciences. As this working paper points out, this perspective does not do justice to the complex phenomenon autonomy is or may be in social and political reality. Hence, the paper argues for a differentiated concept of autonomy, splitting it into autonomy claims, actors, process, rights and powers, regimes, and their institutions. The empirical world suggests a salience of formally and informally lived types of autonomy, especially in Latin America, due to the region's indigenous population often living outside of, or within the limited reach of the state. Therefore, the paper aims to incorporate the dimension of informality - lacking in previous legal positivist approaches. Autonomy regimes could be entrenched in international, constitutional, or secondary law, or they could be tolerated by the state or seized by autonomy claimants by force. From a theoretical or conceptual perspective, the dimension of (in)formality facilitates the incorporation of autonomy into the discussion on governance and government, mostly on the local or regional level. Thus, the paper establishes autonomy regimes as a concept located at the verges of (self-)government and (self-)governance.}, subject = {Staat}, language = {en} } @phdthesis{Shen2021, author = {Shen, Chia-An}, title = {Dicyanomethylene Squaraines: Aggregation and G-Quadruplex Complexation}, doi = {10.25972/OPUS-24359}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-243599}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Squaraine dyes have attracted more attention in the past decade due to their strong and narrow absorption and fluorescence along with the easily functionalized molecular structure. One successful approach of core functionalization is to replace one oxygen of the squaric carbonyl group with a dicyanomethylene group, which shifts the absorption and emission into the near infrared (NIR) region and at the same time leads to a rigid, planar structure with C2v symmetry. However, such squaraines tend to aggregate cofacially in solution due to dispersion forces and dipole-dipole interactions, usually leading to H-type exciton coupling with undesired blue-shifted spectrum and quenched fluorescence. Therefore, the goal of my research was the design of dicyanomethylene-substituted squaraine dyes that self-assemble into extended aggregates in solution with J-type coupling, in order to retain or even enhance their outstanding optical properties. Toward this goal, bis(squaraine) dyes were envisioned with two squaraine units covalently linked to trigger a slip-stacked packing motif within the aggregates to enable J-type coupling. In my first project, bis(squaraine) dye BisSQ1 was synthesized, in which two dicyanomethylene squaraine chromophores are covalently linked. Concentration and temperature-dependent UV/Vis/NIR spectroscopy experiments reveal that BisSQ1 undergoes cooperative self-assembly resulting in J-type aggregates in a solvent mixture of toluene/1,1,2,2-tetrachloroethane (TCE) (98:2, v/v). The J type exciton coupling is evident from the significantly red shifted absorption maximum at 886 nm and the fluorescence peak at 904 nm. In conclusion, this was a first example to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by simply connecting two dyes in a head-to-tail bis chromophore structure. Connecting two squaraine dyes with an additional phenylene spacer (BisSQ2) leads to two different polymorphs with very distinct absorption spectra upon cooling down a solution of BisSQ2 in a solvent mixture of toluene/TCE (98:2, v/v) with different rates. Accordingly, rapid cooling resulted in rigid helical nanorods with an absorption spectrum showing a panchromatic feature, while slow cooling led to a sheet-like structure with a significant bathochromic shift in the absorption spectrum. It was discovered that the conventional molecular exciton model failed to explain the panchromatic absorption features of the nanorods for the given packing arrangement, therefore more profound theoretical investigations based on the Essential States Model (ESM) were applied to unveil the importance of intermolecular charge transfer (ICT) to adequately describe the panchromatic absorption spectrum. Moreover, the red-shift observed in the spectrum for the sheet-like structure can be assigned to the interplay of Coulomb coupling and ICT-mediated coupling. Furthermore, the same bis-chromophore strategy was adopted for constructing an NIR-II emitter with a bathochromically-shifted spectrum. In chloroform, BisSQ3 exhibits an absorption maximum at 961 nm with a significant bathochromic shift (1020 cm-1) compared to the reference mono-squaraine SQ, indicating intramolecular J-type coupling via head-to-tail arrangement of two squaraine dyes. Moreover, BisSQ3 shows a fluorescence peak at 971 nm with a decent quantum yield of 0.33\%. In less polar toluene, BisSQ3 self-assembles into nanofibers with additional intermolecular J-type coupling, causing a pronounced bathochromic shift with absorption maximum at 1095 nm and a fluorescence peak at 1116 nm. Thus, connecting two quinoline-based squaraines in a head-to-tail fashion leads to not only intra-, but also intermolecular J-type exciton coupling, which serves as a promising strategy to shift the absorption and emission of organic fluorophores into the NIR-II window while retaining decent quantum yields. In conclusion, my research illustrates based on squaraine dyes how a simple modification of the molecular structure can significantly affect the aggregation behavior and further alter the optical properties of dye aggregates. Elongated supramolecular structures based on dicyanomethylene substituted squaraine dyes were successfully established by covalently linking two squaraine units to form a bis-chromophore structure. Then, a simple but efficient general approach was established to direct squaraine dye aggregation in solution to the more desired slip-stacked packing leading to J-type exciton coupling by directly connecting two squaraine dyes in a head-to-tail fashion without spacer units. Moreover, the additional spacer between the squaraine dyes in BisSQ2 allowed different molecular conformations, which leads to two different morphologies depending on the cooling rates for a hot solution. Hence, this is a promising strategy to realize supramolecular polymorphism. In general, it is expected that the concept of constructing J-aggregates by the bis-chromophore approach can be extended to entirely different classes of dyes since J-aggregates possess a variety of features such as spectral shifts into the NIR window, fluorescence enhancement, and light harvesting, which are commonly observed and utilized for numerous fundamental studies and applications. Moreover, the insights on short-range charge transfer coupling for squaraine dyes is considered of relevance for all materials based on alternating donor-acceptor π-systems. The panchromatic spectral feature is in particular crucial for acceptor-donor-acceptor (ADA) dyes, which are currently considered as very promising materials for the development of bulk heterojunction solar cells.}, subject = {Squaraine}, language = {en} } @phdthesis{Shao2012, author = {Shao, Changzhun}, title = {Programming Self-assembly: Formation of Discrete Perylene Bisimide Aggregates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-69298}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers.}, subject = {Farbstoff}, language = {en} } @phdthesis{Sengupta2011, author = {Sengupta, Sanchita}, title = {Bio-inspired Zinc Chlorin Dye Assemblies for Supramolecular Electronics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-66935}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Chlorophylls are the most important pigments owing to their involvement in photosynthesis. They perform multiple functions that arise due to their optical and redox as well as packing properties. Semisynthetic zinc chlorins investigated in this thesis are the counterparts for the natural protein-free bacteriochlorophyll (BChl) c assemblies in light-harvesting (LH) systems in bacterial chlorosomes. The major advantage of the zinc chlorin model compounds over the native BChls lies in their facile semisynthetic accessibility from chlorophyll a (Chl a), their higher chemical stability and the possibility to influence their packing by suitable chemical modifications of peripheral side chains. Whilst the favorable excitonic properties and the suitability of ZnChl and natural BChl c dye aggregates for long distance exciton transport are well documented, charge transport properties of aggregates of semisynthetic ZnChls are hitherto unexplored. The present study involves structural elucidations of aggregates of a variety of semisynthetic zinc chlorin derivatives in solution, in solid state and on surfaces by combination of spectroscopic, crystallographic and microscopic techniques, followed by investigation of charge transport properties and conductivities of these aggregates. Chart 1 shows the different ZnChls synthesized in this work that are functionalized with hydroxy or methoxy substituents at 31 position and contain different substituents at the 172-position benzyl ester functional group. The self-assembly of these dyes is strongly dependent upon their chemical structures. While ZnChls 1a, 2a, 3, which are functionalized with 31-hydroxy group bearing dodecyl and oligoethylene glycol side chains form well-soluble rod aggregates, the corresponding 31-methoxy functionalized counterparts 1b, 2b form stacks in solution and on surfaces. These supramolecular polymers have been studied in detail in Chapter 3 by UV/Vis and circular dichroism (CD) spectroscopy and dynamic light scattering (DLS). These studies provided useful insights into the aggregation process of these two types of aggregates. Whereas 31-hydroxy functionalized ZnChl 1a self-assemble into rod aggregates via an isodesmic mechanism, corresponding stack aggregates of ZnChl 1b are formed by a cooperative nucleation-elongation pathway. Detailed electron microscopic studies such as transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) provided unequivocal evidence for hollow tubular nanostructures of water-soluble 31-hydroxy zinc chlorin 3 aggregates for the first time. The measured tube diameter of ~ 5-6 nm of these aggregates is in excellent agreement with electron microscopy data of BChl c rod aggregates in chlorosomes (Chloroflexus aurantiacus, diameter ~ 5-6 nm) and thus complied with the tubular model postulated by Holzwarth and Schaffner... In concord with their highly organized structures, micrometer-scale one dimensionality, robust nature and efficient charge transport capabilities, these self-assembled ZnChl nanotubular, stack and liquid crystalline assemblies are highly promising for supramolecular electronic applications. Research efforts in utilizing these assemblies for (opto)electronic device fabrication, for instance, in organic field effect transistors, should thus be rewarding in the future...}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Schmitt2007, author = {Schmitt, Stefan}, title = {Adsorbatinduzierte richtungsabh{\"a}ngige Facettierung und selbstorganisierte Dom{\"a}nen-Musterbildung auf vizinalen Ag(111)-Oberfl{\"a}chen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-25088}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit den strukturellen Aspekten einer adsorbat-induzierten Facettierung von vizinalen Ag(111)-Oberfl{\"a}chen. Bei dem Adsorbat handelte es sich um das organische Molek{\"u}l Perylen-3,4,9,10-Tetracarbons{\"a}ure-Dianhydrid (PTCDA). Die Experimente wurden unter Ultrahochvakuum-Bedingungen durchgef{\"u}hrt, die Charakterisierung erfolgte haupts{\"a}chlich mit den Messmethoden Rastertunnelmikroskopie (STM) und niederenergetische Elektronenbeugung (LEED). Das planare Farbstoffmolek{\"u}l PTCDA adsorbiert pr{\"a}ferentiell an den Stufenkanten der verwendeten 8.5° Ag(111)-Vizinaloberfl{\"a}chen und induziert bei geeigneten Pr{\"a}parationsbedingungen eine Rekonstruktion in stark gestufte Facettenfl{\"a}chen und in stufenfreie (111)-Terrassen. Die beobachteten Facetten sind f{\"u}r das System PTCDA/Ag charakteristisch und stellen durch eine molekulare {\"U}berstruktur richtungsselektiv stabilisierte Ag-Kristallebenen dar. Durch die Variation der Stufenrichtung der Startoberfl{\"a}che wurde eine Vielzahl von Facettentypen erhalten und nach Miller indiziert. In ihrer Gesamtheit erlauben sie einen R{\"u}ckschluss auf das Aussehen der Gleichgewichtskristallform eines mit PTCDA bedeckten Ag-Kristalles und damit auf das richtungsabh{\"a}ngige Benetzungsverhalten von Ag. Aus der Sicht des Substrates bewirkt das Adsorbat eine massive Erh{\"o}hung der Steifheit der Stufen. Die durch eine molekulare {\"U}berstruktur stabilisierten Facettenfl{\"a}chen {\"u}bernehmen die in der Kristallstruktur des Substrates angelegten Stufenrichtungen. Die gefundene Ausbildung von zwei typischen Facettensteigungen ist jedoch nicht durch die Ag-Kristallstruktur motivierbar. Die Facettierung wurde im Rahmen einer speziellen Adaption des Konzepts der Thermodynamik auf ebene gestufte Oberfl{\"a}chen als Orientierungsphasenseparation beschrieben. Dieses Konzept erlaubt eine korrekte Beschreibung der beobachteten lokalen Ph{\"a}nomene und zeigt zudem auf, dass das molekulare Gas, welches in den Messungen nicht erfasst wurde, eine wichtige Rolle bei der Rekonstruktion spielt. Es ergaben sich wichtige Indizien f{\"u}r die Existenz einer kritischen Inselgr{\"o}ße f{\"u}r PTCDA auf Ag(111). Es wurde eine vollst{\"a}ndige strukturelle Analyse aller stabilen molekularen {\"U}berstrukturen auf vizinalen Ag(111)-Oberfl{\"a}chen durchgef{\"u}hrt. Es wurden insgesamt 16 solcher {\"U}berstrukturen gefunden, von denen bisher nur 3 Strukturen bekannt und ver{\"o}ffentlicht waren. Dichte und Kommensurabilit{\"a}t der Facetten{\"u}berstrukturen sind systematisch vom Stufentyp der Oberfl{\"a}che abh{\"a}ngig. Die Frage nach dem Ursprung der beiden charakteristischen Facettensteigungen ist mit der Existenz von zwei Typen von {\"U}berstrukturgrenzen verkn{\"u}pft. Die Grenze bestimmt die Lage der fischgr{\"a}tartigen {\"U}berstruktur zu den Stufenkanten und die L{\"a}nge und die Breite des Molek{\"u}ls die beiden charakteristischen Stufenabst{\"a}nde. Letzteres geschieht verm{\"o}ge einer lokalen Wechselwirkung der PTCDA-Molek{\"u}le mit den Stufen. Die {\"U}berstrukturgrenzen erweisen sich als wichtiges Element der Rekonstruktion. Es wurden außerdem die Abh{\"a}ngigkeiten der verschiedenen, aneinander angrenzenden {\"U}berstrukturen aufgezeigt. Auf den (111)-Terrassen fanden sich 3 metastabile Ausnahme-Strukturen, welche einen vertieften Einblick in die komplexe Bildungskinetik der bisher bekannten stabilen (111)-Struktur erlauben. Die Facetten bilden zusammen mit den benachbarten (111)-Terrassen regelm{\"a}ßige, einem Reflexionsgitter {\"a}hnliche Muster mit einer Strukturweite von 5 bis 75nm. Die beobachteten Strukturweiten erreichen bei ausgedehntem Tempern typische Maximalwerte. STM-Messungen zeigen den Einfluss einer langreichweitigen Wechselwirkung zwischen den Facetten, vermittelt {\"u}ber elastische Eigenschaften des Substrates. Die Muster k{\"o}nnen als selbstorganisierte Zweiphasensysteme im thermodynamischen Gleichgewicht erkl{\"a}rt werden. Die Facetten wirken wie repulsiv wechselwirkende Defekte in einem elastischen Medium. Die Eignung dieser Muster als Templat wurde in Kooperation mit einer anderen Arbeitsgruppe am Beispiel der selektiven Deposition von Eisen belegt.}, subject = {Adsorbat}, language = {de} } @phdthesis{Schmidt2011, author = {Schmidt, Ralf}, title = {Hamilton-Receptor-Mediated Self-Assembly of Merocyanine Dyes into Supramolecular Polymers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56265}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Die Selbstorganisation von Merocyaninfarbstoffen zu supramolekularen Polymeren wurde untersucht. Dabei konnte die Anordnung der hoch dipolaren Farbstoffe durch die Verwendung von verschiedenen Kombinationen von Wasserstoffbr{\"u}ckenbindungsmotiven und dipolarer Aggregation der Chromophore gesteuert.}, subject = {Selbstorganisation}, language = {en} } @techreport{Schmidt2022, type = {Working Paper}, author = {Schmidt, Jo{\~a}o Pedro}, title = {Local Self-Organization and the Third Sector: Between the Philanthropic and the Associative Approaches}, doi = {10.25972/OPUS-28280}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-282803}, pages = {18}, year = {2022}, abstract = {Civil society organizations only started to be considered a sector in the 1970s in the United States. Amitai Etzioni pioneered the use of the expression third sector, which became common in academic and political literature. However, in the United States, the non-profit sector concept gradually became more robust and was spread internationally based on the studies conducted by Lester Salomon and associated researchers. The theory built on the concept of the non-profit sector is strongly related to the North American cultural context, marked by the tradition of philanthropy and volunteerism, but with little importance given to associative and cooperative organizations. The non-profit sector is implicitly or explicitly conceived as part of the private sphere. In contrast, theoretical currents such as liberal communitarianism, the theories of cooperation, common goods, social capital, European social economy, and the Latin American solidarity economy highlight the primacy of cooperation in solving collective problems. These theories underpin the associative approach of the third sector and link it to the community, not to the market. This paper argues that the associative approach is more appropriate for international studies on the third sector and the relevance of self-organization. The third sector, i.e., the set of organizations created and maintained by civil society, is the inheritor of the millennial associative tradition, including both entities whose values are compatible with the common good and those with particularistic values, authoritarian and contrary to human rights. The third sector is not entirely virtuous, but it is a vital sector for solving great human problems.}, subject = {Kommunitarismus}, language = {en} } @phdthesis{Schlosser2012, author = {Schlosser, Felix}, title = {Synthese und Charakterisierung kovalent gebundener Perylenbisimid-Makrozyklen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-71811}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Eine Reihe von Acetylen-verkn{\"u}pften Perylenbisimid(PBI)-Makrozyklen mit unterschiedlicher Ringgr{\"o}ße wurde durch Palladium-katalysierte Homokupplung synthetisiert und mit Hilfe von Recycling-GPC getrennt. Diese Makrozyklen wurden durch NMR-Spektroskopie und Massenspektrometrie charakterisiert und weiterhin die photophysikalischen Eigenschaften durch UV/Vis-Absorptions- und Fluoreszenzemissions-Messungen untersucht. Die Selbstorganisation dieser PBI-Makrozyklen zu hochgeordneten Nanostrukturen auf HOPG-Oberfl{\"a}chen wurde mittels Rasterkraftmikroskopie untersucht.}, subject = {Makrocyclische Verbindungen}, language = {de} } @phdthesis{Sapotta2021, author = {Sapotta, Meike}, title = {Perylene Bisimide Cyclophanes: Recognition of Alkaloids, Aggregation Behavior in Aqueous Environment and Guest-Mediated Chirality Transfer}, doi = {10.25972/OPUS-20002}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200028}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Inspired by the fact that sufficient solubility in aqueous media can be achieved by functional substitution of perylene bisimides (PBIs) with polar groups, one of the essential aims of this thesis was the design and successful synthesis of the new water-soluble PBI cyclophanes [2PBI]-1m and [2PBI]-1p, which are appended with branched, hydrophilic oligoethylene glycol (OEG) chains. Subsequently, the focus was set on the elucidation of properties of PBI cyclophane hosts which are also of relevance for recognition processes in biological systems. The performance of the new amphiphilic PBI cyclophane [2PBI]-1p as synthetic receptors for various natural aromatic alkaloids in aqueous media was thoroughly investigated. Alkaloids represent a prominent class of ubiquitous nitrogen containing natural compounds with a great structural variety and diverse biological activity. As of yet, no chromophore host acting as a molecular probe for a range of alkaloids such as harmine or harmaline is known. In addition, the self-association behavior of cyclophane host [2PBI]-1m and its reference monomer in water was studied in order to gain insights into the thermodynamic driving forces affecting the self-assembly process of these two PBI systems in aqueous environment. Moreover, the chirality transfer upon guest binding previously observed for a PBI cyclophane was investigated further. The assignment of the underlying mechanism of guest recognition to either the induced fit or conformational selection model was of particular interest.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{SafontSempere2010, author = {Safont Sempere, Marina Montserrat}, title = {Chiral self-sorting of atropo-enantiomeric perylene bisimide dyes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-55359}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2010}, abstract = {This thesis included the synthesis of conformationally stable chiral perylene bisimide (PBI) dyes, the study of their optical properties in solution and their chiral self-sorting behaviour in nonpolar solvents in which dimerization via pi-pi-stacking takes place. Furthermore, the influence of PBI core chirality on the properties of these dyes in the condensed state has been also studied. We have demonstrated and quantified the prevalence of chiral self-recognition over self-discrimination in pi-stacking dimerization of PBIs. It has been shown that this self-recognition event is compromised by the increasing flexibility of the structures related to the size of the OEG bridging units. Moreover, the inherent chirality of these PBIs has been proven to strongly influence their condensed state properties, for which large differences between the pure enantiomers and the racemates were revealed, as well as between the different bridged macrocyclic PBIs.}, subject = {Farbstoff}, language = {en} } @phdthesis{Roeger2007, author = {R{\"o}ger, Cornelia}, title = {Bioinspired Light-Harvesting Zinc Chlorin Rod Aggregates Powered by Peripheral Chromophores}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-26760}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Artificial light-harvesting (LH) systems have been obtained by self-assembly of naphthalene diimide-functionalized zinc chlorin dyads and triad in nonpolar, aprotic solvents. UV-vis, CD, and steady-state emission spectroscopy as well as atomic force microscopy showed that rod-like structures are formed by excitonic interactions of zinc chlorin units, while the appended naphthalene diimide dyes do not aggregate at the periphery of the cylinders. In all cases, photoexcitation of the enveloping naphthalene diimides at 540 and 620 nm, respectively, was followed by highly efficient energy-transfer processes to the inner zinc chlorin backbone, as revealed by time-resolved fluorescence spectroscopy on the picosecond time-scale. As a consequence, the LH efficiencies of zinc chlorin rod aggregates were increased by up to 63\%. The effective utilization of solar energy recommends these biomimetic systems for an application in electronic materials on the nanoscale.}, subject = {Farbstoff}, language = {en} } @phdthesis{Rest2015, author = {Rest, Christina}, title = {Self-assembly of amphiphilic oligo(phenylene ethynylene)-based (bi)pyridine ligands and their Pt(II) and Pd(II) complexes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-133248}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry. The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Rehm2015, author = {Rehm, Stefanie}, title = {Spermine-functionalized Perylene Bisimide Dyes: Synthesis and Self-assembly in Water}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123201}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed.}, subject = {Perylenderivate}, language = {en} } @phdthesis{Pollinger2008, author = {Pollinger, Florian}, title = {Surface stress and large-scale self-organization at organic-metal interfaces}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-33310}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {Anhand von Modellsystemen wurde in dieser Arbeit die Bedeutung elastischer Wechselwirkungen an Organik-Metall Grenzfl{\"a}chen, insbesondere f{\"u}r die Selbstorganisierte Ausbildung periodisch facettierter Strukturen, untersucht. Die {\"A}nderung der Oberfl{\"a}chenspannung w{\"a}hrend der Ausbildung der Grenzfl{\"a}che zwischen 3,4,9,10-Perylentetracarbons{\"a}uredianhydrid (PTCDA) und Ag(111) wurde mit der Biegekristalltechnik gemessen. Es ist bekannt, dass dieses System durch eine chemisorptive Bindung bestimmt wird. In der Tat stimmen Vorzeichen und Bedeckungsabh{\"a}ngigkeit mit Vorhersagen und Experimenten aus der Literatur zu chemisorptiv bestimmten Grenzfl{\"a}chen {\"u}berein. W{\"a}hrend der Einbau von Molek{\"u}len in große Dom{\"a}nen die Oberfl{\"a}chenspannung verringert, f{\"u}hrt das Auftreten von fehlerhaften Dom{\"a}nengrenzen zu einer Erh{\"o}hung der Oberfl{\"a}chenspannung. Die absolute {\"A}nderung der Oberfl{\"a}chenspannung in der H{\"o}he von (0.30 +- 0.10) N/m ist in der relativ schwachen Wechselwirkung des PTCDA Molek{\"u}ls mit einem einzelnen Silberatom begr{\"u}ndet. Es soll jedoch betont werden, dass dieser Wert einer Oberfl{\"a}chenspannungs{\"a}nderung von (2.2 +- 0.2) eV pro Molek{\"u}l entspricht, die damit in derselben Gr{\"o}ßenordnung wie die vermutete Bindungsenergie des Systems liegt. Daher zeigen diese Experimente, dass elastische Wechselwirkungen eine nicht zu vernachl{\"a}ssigende Rolle in dieser ganzen Materialklasse spielen k{\"o}nnen. Dadurch tragen die Experimente eine neue Sichtweise zum Verst{\"a}ndnis dieser Grenzfl{\"a}chen bei. Ferner etablieren sie die Biegekristalltechnik auf dem ganzen Feld der Organik-Metall Grenzfl{\"a}chen, da die Ergebnisse in Einklang mit den wohlbekannten Eigenschaften des Systems liegen. Schon der Nachweis einer Durchbiegung der Probe ist speziell f{\"u}r die Grenzfl{\"a}che PTCDA/Ag(111) von Bedeutung. Dieser Effekt ist der erste experimentelle Nachweis einer strukturellen {\"A}nderung in den obersten Substratatomlagen w{\"a}hrend der Adsorption von PTCDA auf Ag(111). Da eine solche Modifikation nicht zu vernachl{\"a}ssigende Konsequenzen f{\"u}r die Interpretation anderer experimenteller Ergebnisse hat, erscheinen weitere Studien mit anderen, quantitativeren strukturellen Methoden notwendig. Der Schwerpunkt dieser Arbeit lag jedoch auf der Untersuchung der Ausbildung der langreichweitigen, selbstorganisierten Ordnung der facettierten PTCDA/Ag(10 8 7) Grenzfl{\"a}che. Der reziproke Raum dieser Grenzfl{\"a}che wurde sowohl mit mittelnder hochaufl{\"o}sender Elektronenbeugung (SPA-LEED) als auch mit lokaler Elektronenbeugung in der Mikroskopie niederenergetischer Elektronen (LEEM) kartiert. Außerdem wurden diese reziproken Daten durch mikroskopische LEEM Realraumdaten komplement{\"a}r erg{\"a}nzt um die Morphologie der Grenzfl{\"a}che zu charakterisieren. F{\"u}r die gew{\"a}hlte Pr{\"a}parationsart, Adsorption der Molek{\"u}le auf das 550 K warme Substrat, wurden sechs verschiedene Facettentypen ((111), (532), (743),(954), (13 9 5) und (542)) beobachtet. Diese Facettentypen treten in homogenen, mikrometergroßen Gebieten auf der Oberfl{\"a}che auf, wie Dunkelfeld-LEEM Aufnahmen zeigen. Wenn jedoch die urspr{\"u}ngliche mesoskopische Orientierung der Oberfl{\"a}che lokal von der Durchschnittsorientierung z.B. in Bezug auf die urspr{\"u}ngliche Stufendichte abweicht, werden an dieser Stelle andere Facettentypen gebildet und damit das ansonsten regelm{\"a}ßige Muster gest{\"o}rt. Sowohl der Grad der erreichten Ordnung der facettierten Grenzfl{\"a}che als auch die gebildeten Facettentypen h{\"a}ngen somit stark von der urspr{\"u}nglichen mesoskopischen Morphologie des sauberen Substrates ab. Um das Verst{\"a}ndnis der kinetischen Prozesse zu verbessern wurde die Temperaturabh{\"a}ngigkeit der Ausbildung der Grenzfl{\"a}che in einem Temperaturbereich zwischen 418 K und 612 K untersucht. Bei niedrigen Wachstumstemperaturen traten zus{\"a}tzliche, steilere Facetten mit einem Neigungswinkel von 27° gegen{\"u}ber der (111) Fl{\"a}che auf. Weiterhin wurde mit facetten-sensitivem Dunkelfeld-LEEM die Gr{\"o}ßen- sowie die r{\"a}umliche Verteilung ausgew{\"a}hlter Facettentypen bei den verschiedenen Temperaturen untersucht. Die Nukleationsdichte der Facetten zeigte dabei keine Temperaturabh{\"a}ngigkeit. Eine Diffusionslimitierung der Nukleation kann daher ausgeschlossen werden. Dar{\"u}ber hinaus wurden die Ausmaße der Facetten statistisch ausgewertet. Die absolute Facettengr{\"o}ße folgt einer exponentiellen Verteilung, was auf ein zufallsgetriebenes Wachstum und das Fehlen einer Wechselwirkung der Facetten untereinander hinweist. W{\"a}hrend die Facettenl{\"a}ngen ebenso einer exponentiellen Verteilung unterliegen, ist die Breitenverteilung durch ein Maximum ausgezeichnet. Letztere Verteilung spiegelt den hohen Grad an lateraler Ordnung in dem System wieder. Diese Anisotropie h{\"a}ngt von der Temperatur ab und kann bei Substrattemperaturen {\"u}ber 478 K w{\"a}hrend des Wachstums beobachtet werden. Die Existenz eines Maximums in einer solchen Gr{\"o}ßenverteilung weist auf eine langreichweitige Wechselwirkung hin, die die strukturelle Ordnung induziert. Die Natur dieser langreichweitigen Wechselwirkung wurde mit drei komplement{\"a}ren in-situ Methoden untersucht, wobei jeweils neue Einblicke in die Ausbildung von facettierten Organik-Metall-Grenzfl{\"a}chen gewonnen werden konnten: Die Biegekristalltechnik, hochaufl{\"o}sende Beugung niederenergetischer Elektronen (SPALEED), sowie deren Mikroskopie (LEEM). Die Biegekristalltechnik wurde das erste Mal {\"u}berhaupt auf ein facettierendes System angewendet. Unterhalb der kritischen Temperatur des Facettierungs{\"u}berganges {\"a}hnelt die Oberfl{\"a}chenspannungs{\"a}nderung w{\"a}hrend der Bildung der PTCDA/Ag(10 8 7)-Grenzfl{\"a}chenbildung sowohl in funktionaler Abh{\"a}ngigkeit als auch in der Gr{\"o}ßenordnung der f{\"u}r die Referenzgrenzfl{\"a}che PTCDA/Ag(111) beobachteten. Oberhalb der {\"U}bergangstemperatur beobachtet man jedoch f{\"u}r die ausfacettierte PTCDA/Ag(10 8 7) Grenzfl{\"a}che mit (0.67 +- 0.10) N/m eine bedeutend gr{\"o}ßere Oberfl{\"a}chenspannungs{\"a}nderung als in den vorherigen F{\"a}llen. Zudem {\"a}ndert sich die Oberfl{\"a}chenspannung in klar unterscheidbaren Schritten mit einer eindeutig aufl{\"o}sbaren Feinstruktur aus positiven und negativen Spannungs{\"a}nderungen. Diese einzelnen Phasen in der {\"A}nderung der Oberfl{\"a}chenspannung k{\"o}nnen Stufen in der Entwicklung der Struktur{\"u}berganges dieses Systems zugeordnet werden, die mit den strukturellen Charakterisierungsmethoden beobachtet wurden. Durch diese Identifikation werden morphologischen Objekten, also den Facetten, ein eigener besonderer Spannungscharakter zugeordnet. Somit werden aber auch Spannungsdom{\"a}nen auf der Oberfl{\"a}che identifiziert. Die Existenz dieser Spannungsdom{\"a}nen ist nun aber die Vorraussetzung f{\"u}r die Anwendung von elastizit{\"a}tsbasierten Kontinuumsbeschreibungen des Selbstordnungseffektes. Daher stellen diese Ergebnisse den ersten experimentellen Nachweis dar, dass diese Kontinuumsbeschreibungen der Selbstorganisation tats{\"a}chlich auch auf die gesamte Materialklasse der facettierenden Organik-Metall-Grenzfl{\"a}chen angewendet werden k{\"o}nnen. Zusammengefasst sind diese Ergebnisse starke Beweise daf{\"u}r, dass elastische Wechselwirkungen der physikalische Ursprung der langreichweitigen Ordnung dieses Systems sind. Weiterhin legt die eindeutige Korrelation zwischen strukturellem Phasen{\"u}bergang und Oberfl{\"a}chenspannungs{\"a}nderung auch nahe, dass letzterer ebenso eine wichtige Rolle in der Kinetik des Systems spielt. Tats{\"a}chlich scheint das System zu versuchen die Gesamt{\"a}nderung der Oberfl{\"a}chenspannung w{\"a}hrend der Grenzfl{\"a}chenbildung durch die Bildung von Facettentypen positiven und negativen Charakters zu begrenzen. Daher k{\"o}nnte die Art ihres Beitrags zur Oberfl{\"a}chenspannungs{\"a}nderung dar{\"u}ber entscheiden, ob eine bestimmte Facettenorientierung gebildet wird oder nicht. Auch scheint das System sich bei hohen Bedeckungen unter anderem deshalb erneut umzufacettieren um der Bildung von fehlerhaften Dom{\"a}nengrenzen entgegenzuwirken, die mit einem Anstieg der Oberfl{\"a}chenspannung verbunden w{\"a}ren. Schließlich wurde im Rahmen dieser Arbeit noch das templatunterst{\"u}tzte Wachstum lateraler, heteroorganischer Nanostrukturen untersucht. Dabei wurde ein zweites, typisches molekulares Modellsystem, sogenannte "Selbstassemblierte Monolagen", auf der teilbedeckten PTCDA/Ag(10 8 7) Grenzfl{\"a}che aufgewachsen. Mit Standardmethoden der Oberfl{\"a}chencharakterisierung konnte nachgewiesen werden, dass die grundlegenden Eigenschaften dieses Wachstumsprinzips im Experiment in der Tat erreicht werden.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{PeethambaranNairSyamala2021, author = {Peethambaran Nair Syamala, Pradeep}, title = {Bolaamphiphilic Rylene Bisimides: Thermodynamics of Self-assembly and Stimuli-responsive Properties in Water}, doi = {10.25972/OPUS-21342}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-213424}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate 'smart' materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers.}, subject = {Supramolekulare Chemie}, language = {en} } @techreport{Neubert2021, type = {Working Paper}, author = {Neubert, Dieter}, title = {The Hidden Side of Local Self-Organisation and Self-Regulation. Elements for the Comparative Analysis of the Constitution of Self-Organised Groups}, doi = {10.25972/OPUS-25149}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251493}, pages = {42}, year = {2021}, abstract = {The notions self-organisation and self-regulation are at least implicitly loaded with a positive democratic connotation. The main corresponding debates on social movements, governance and civil society mostly refer to the Global North with a well-functioning state and democratic political systems. One consequence is that the less democratic and less liberal hidden side of self-organisation, seen by some critics, does not gain much attention. After a short discussion of the main theoretical approaches, the paper presents a selection of self-organised groups depicting their different values, norms, and structural features. These examples reach from democratic groups marked by solidarity to racist violent groups that are a threat to differently minded people. The analysis of these examples leads to a set of criteria for the comparative analysis of the internal structure of self-organised groups including potential membership, in- and outward orientation, underlying basic principles of social order and types of trust with related types of decision-making. These basic elements help to understand the constitution and functioning of self-organisation, which are open to a wide range of value orientation.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{Muehlberger2018, author = {M{\"u}hlberger, Clemens}, title = {Design of a Self-Organizing MAC Protocol for Dynamic Multi-Hop Topologies}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-158788}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Biologically inspired self-organization methods can help to manage the access control to the shared communication medium of Wireless Sensor Networks. One lightweight approach is the primitive of desynchronization, which relies on the periodic transmission of short control messages - similar to the periodical pulses of oscillators. This primitive of desynchronization has already been successfully implemented as MAC protocol for single-hop topologies. Moreover, there are also some concepts of such a protocol formulti-hop topologies available. However, the existing implementations may handle just a certain class of multi-hop topologies or are not robust against topology dynamics. In addition to the sophisticated access control of the sensor nodes of a Wireless Sensor Network in arbitrary multi-hop topologies, the communication protocol has to be lightweight, applicable, and scalable. These characteristics are of particular interest for distributed and randomly deployed networks (e.g., by dropping nodes off an airplane). In this work we present the development of a self-organizing MAC protocol for dynamic multi-hop topologies. This implies the evaluation of related work, the conception of our new communication protocol based on the primitive of desynchronization as well as its implementation for sensor nodes. As a matter of course, we also analyze our realization with regard to our specific requirements. This analysis is based on several (simulative as well as real-world) scenarios. Since we are mainly interested in the convergence behavior of our protocol, we do not focus on the "classical" network issues, like routing behavior or data rate, within this work. Nevertheless, for this purpose we make use of several real-world testbeds, but also of our self-developed simulation framework. According to the results of our evaluation phase, our self-organizing MAC protocol for WSNs, which is based on the primitive of desynchronization, meets all our demands. In fact, our communication protocol operates in arbitrary multi-hop topologies and copes well with topology dynamics. In this regard, our protocol is the first and only MAC protocol to the best of our knowledge. Moreover, due to its periodic transmission scheme, it may be an appropriate starting base for additional network services, like time synchronization or routing.}, language = {en} } @phdthesis{Mahapatra2007, author = {Mahapatra, Suddhasatta}, title = {Formation and Properties of Epitaxial CdSe/ZnSe Quantum Dots : Conventional Molecular Beam Epitaxy and Related Techniques}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-32831}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Albeit of high technological import, epitaxial self-assembly of CdSe/ZnSe QDs is non-trivial and still not clearly understood. The origin and attributes of these QDs are significantly different from those of their III-V and group-IV counterparts. For III-V and group-IV heterosystems, QD-formation is assigned to the Stranski Krastanow (SK) transition, wherein elastic relaxation of misfit strain leads to the formation of coherent three-dimensional (3D) islands, from a supercritically strained two-dimensional (2D) epilayer. Unfortunately, this phenomenon is inconspicuous for the CdSe/ZnSe heterosystem. Well-defined 3D islands are not readily formed in conventional molecular beam epitaxial (MBE) growth of CdSe on ZnSe. Consequently, several alternative approaches have been adopted to induce/enhance formation of QDs. This thesis systematically investigates three such alternative approaches, along with conventional MBE, with emphasis on the formation-mechanism of QDs, and optimization of their morphological and optical attributes. It is shown here that no distinct 3D islands are formed in MBE growth of CdSe on ZnSe. The surface of the CdSe layer represents a rough 2D layer, characterized by a dense array of shallow (<1nm) abutting mounds. In capped samples, the CdSe deposit forms an inhomogeneous CdZnSe quantum well (QW)-like structure. This ternary QW consists of local Cd-rich inclusions, which confine excitons three-dimensionally, and act as QDs. The density of such QDs is very high (~ 1012 cm-2). The QDs defined by the composition inhomogeneities of the CdZnSe QW presumably originate from the shallow mounds of the uncapped CdSe surface. By a technique wherein a CdSe layer is grown at a low temperature (TG = 230 °C) and subsequently annealed at a significantly higher temperature (TA =310 °C), tiny but distinct 3D islands are formed. In this work, the mechanism underlying the formation of these islands is reported. While the CdSe deposit forms a quasi-two-dimensional (quasi-2D) layer at TG = 230 °C, subsequent annealing at TA = 310 °C results in a thermally activated "up-climb" of adatoms onto two-dimensional clusters (or precursors) and concomitant nucleation of 3D islands. The areal density of QDs, achieved by this technique, is at least a decade lower than that typical for conventional MBE growth. It is demonstrated that further reduction is possible by delaying the temperature ramp-up to TA. In the second technique, formation of distinct islands is demonstrated by deposition of amorphous selenium (a-Se) onto a 2D CdSe epilayer at room temperature and its subsequent desorption at a higher temperature (TD = 230 °C). Albeit the self-assembled islands are large, they are severely truncated during subsequent capping with ZnSe, presumably due to segregation of Cd and Zn-alloying of the islands. The segregation phenomenon is analyzed in this work and correlated to the optical properties of the QDs. Additionally, very distinct vertical correlation of QDs in QD-superlattices, wherein the first QD-layer is grown by this technique and the subsequent ones by migration enhanced epitaxy (MEE), is reported. The process steps of the third variant technique, developed in course of this work, are very similar to those of the previous one-the only alteration being the substitution of selenium with tellurium as the cap-forming-material. This leads not only to large alteration of the morphological and optical attributes of the QDs, but also to formation of unique self-assembled island-patterns. Oriented dashes, straight and buckled chains of islands, and aligned island-pairs are formed, depending on the thickness of the Te-cap layer. The islands are partially alloyed with Te and emit luminescence at very low energies (down to 1.7 eV at room temperature). The Te cap layer undergoes (poly)crystallization during temperature ramp-up (from room temperature to TD) for desorption. Here, it is shown that the self-assembled patterns of the island-ensembles are determined by the pattern of the grain boundaries of the polycrystalline Te layer. Based on an understanding of the mechanism of pattern formation, a simple and "clean" method for controlled positioning of individual QDs and QD-based extended nanostructures, is proposed in this work. The studies carried out in the framework of this thesis provide not only a deeper insight into the microscopic processes governing the heteroepitaxial self-assembly of CdSe/ZnSe(001) QDs, but also concrete approaches to achieve, optimize, and control several technologically-important features of QD-ensembles. Reduction and control of QD-areal-density, pronounced vertical correlation of distinctly-defined QDs in QD-superlattices, and self-assembly of QD-based extended structures, as demonstrated in this work, might turn out to be beneficial for envisioned applications in information-, and communication-technologies.}, subject = {Nanostruktur}, language = {en} } @phdthesis{Lohr2008, author = {Lohr, Andreas}, title = {Self-Assembly of Merocyanines : Thermodynamic and Kinetic Insights into the Formation of Well-Defined Dye Aggregates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-28964}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {The present thesis demonstrates the potential of dipolar aggregation of merocyanine dyes as novel directional and specific supramolecular binding motif for the creation of more elaborate supramolecular architectures beyond simple dimers. Furthermore, the self-assembly studies into bis(merocyanine) nanorods gave new insights into the kinetics of morphogenesis in supramolecular aggregates.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Li2009, author = {Li, Xueqing}, title = {Hydrogen Bond-directed Self-assembly of Perylene Bisimide Organogelators}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-43727}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {Perylene bisimide (PBI) dyes are a widely used class of industrial pigments, and currently have gained significant importance for organic-based electronic and optical devices. Structural modification at the PBI core results in changes of the optical and electronic properties, which enable tailored functions. Moreover, the aggregation behavior of PBIs is alterable and controllable to achieve new materials, among which organogels are of particular interest because of their potential for applications as supramolecular soft materials. In this work, new PBI-based organic gelators were designed, synthesized, and characterized, and the aggregation behaviors under different conditions were intensively studied by various spectroscopic and microscopic methods. In chapter 2, a brief overview is given on the structural and functional features of organogel systems. The definition, formation and reversibility of organogels are introduced. Some examples on dye based organogel are selected, among which PBI-based organogelators reported so far are especially emphasized. Some basic knowledges of supramolecular chirality are also overviewed such as characterization, amplification, and symmetry breaking of the chiral aggregates. According to our former experiences, PBIs tend to form aggregates because the planer aromatic cores interact with one another by pi-pi interaction. In chapter 3, a new PBI molecule is introduced which possesses amide groups between the conjugated core and periphery alkyl chains. It is found that well oriented aggregates are formed by hydrogen bonding and the pi-pi interaction of the cores. These interactions enable the aggregates to grow in one-dimension forming very long fibers, and these fibers further intercross to 3D network structures, e.g., organogels. In comparison to the very few PBI-based gelators reported before, one advantage of this gelator is that, it is more versatile and can gelate a wide range of organic solvents. Moreover, the well-organized fibers that are composed of extended \&\#960;-stacks provide efficient pathways for n-type charge carriers. Interestingly, AFM studies reveal that the PBI molecules form well-defined helical fibers in toluene. Both left-handed (M) and right-handed (P) helicities can be observed without any preference for one handedness because the building block is intrinsically achiral. In chapter 4, we tried to influence the M/P enantiomeric ratio by applying external forces. For example, we utilized chiral solvents to generate chiral aggregates with a preferential handedness. AFM analysis of the helices showed that a enantiomeric ratio of about 60: 40 can be achieved by aggregation in chiral solvents R- or S-limonene. Moreover, the long aggregated fibres can align at macroscopic level in vortex flows upon rotary stirring In chapter 5, bulky tetra-phenoxy groups are introduced in the bay area of the PBI gelator. The conjugated core of the new molecule is now distorted because of the steric hindrance. UV/Vis studies reveal a J-type aggregation in apolar solvents like MCH due to intermolecular pi-pi-stacking and hydrogen-bonding interactions. Microscopic studies reveal formation of columnar aggregates in apolar solvent MCH, thus this molecule lacks the ability to form gels in this solvent, but form highly fluorescent lyotropic mesophases at higher concentration. On the other hand, in polar solvents like acetone and dioxane, participation of the solvent molecules in hydrogen bonding significantly reduced the aggregation propensity but enforced the gel formation. The outstanding fluorescence properties of the dye in both J-aggregated viscous lyotropic mesophases and bulk gel phases suggest very promising applications in photonics, photovoltaics, security printing, or as fluorescent sensors. In chapter 6, we did some studies on combining PBI molecules with inorganic gold nanorods. Gold nanorods were synthesized photochemically. By virtue of the thioacetate functionalized PBIs, the rods were connected end to end to form gold nanochains, which were characterized by absorption spectra and TEM measurement. Such chromophore-nanorod hybrids might be applied to guide electromagnetic radiation based on optical antenna technology.}, subject = {Perylenderivate}, language = {en} } @phdthesis{Li2015, author = {Li, Han}, title = {Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123407}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {159}, year = {2015}, abstract = {In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.}, subject = {Kohlenstoff-Nanor{\"o}hre}, language = {en} } @phdthesis{Kriegisch2005, author = {Kriegisch, Volker}, title = {Electron transfer processes between organic redox centres and electrodes via active bridges in self-assembled monolayers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15892}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {Cyclovoltammetrische Messungen der Ferrocenalkylthiole 1 - 3 belegen, dass homogene, gemischte Monolagen aus redoxaktiven Verbindungen und redoxinaktiven Alkylthiolen gebildet werden. Die von Creager et al. bestimmten ET Raten der Ferrocenalkylthiole 1 - 3 konnten hierbei verifiziert werden. Wie erwartet erfolgt eine Abnahme der ET Geschwindigkeit bei einer Kettenverl{\"a}ngerung des Alkylspacers von 2 nach 3. Eine unterschiedliche Konnektivit{\"a}t zwischen Redoxzentrum und Alkylspacer, z. B. die Einf{\"u}hrung einer Carbonyl-Funktion im Falle von 1, unter Beibehaltung der Kettenl{\"a}nge zeigt keinen bemerkbaren Einfluß auf den ET. Trotzt vergleichbaren Abstands der aromatischen Ferrocenthiole 4 und 5 zu der C8-Alkyl-Verbindung 2 zwischen Redoxzentrum und Elektrode, weisen diese aufgrund ihrer starken Konjugation sehr hohe ET Geschwindigkeiten auf. Die elektronischen Kopplungsfaktoren selbst deuten auf einen nichtadiabtischen ET zwischen Redoxzentrum und Elektrode hin. Wie erwartet kommt es zu einem Anwachsen der Kopplungsfaktoren bei sich verk{\"u}rzender Kettenl{\"a}nge oder bei Einf{\"u}hrung konjugierter Spacersysteme. Zusammenfassend kann gesagt werden, dass Erfahrungen hinsichtlich der Pr{\"a}paration der Monolagen gesammelt, die gemessenen ET Raten f{\"u}r der literaturbekannten Verbindungen 1 - 3 best{\"a}tigt und diese Informationen auf die konjugierten Verbindungen 4 und 5 angewandt werden konnten. Im zweiten Teil wurden die Triarylamin- (29, 32) und Phenothiazinalkylthiole (35) bez{\"u}glich ihres ET Verhaltens in gemischten Monolagen untersucht. Mittels Cyclovoltammetrie konnte gezeigt werden, daß einheitlich geformte, verd{\"u}nnte Monolagen vorliegen. Die ET Raten der Triarylamin- (29, 32) und Phenithiazinalkylthiole (35) sind jedoch um den Faktor 10 bis 100 h{\"o}her als vergleichbare Ferrocenalkylthiole gleicher Kettenl{\"a}nge [1, 2], wohingegen f{\"u}r Monolagen, welche [Ru(bpy)2(pp)]+-Alkythiole enthalten, {\"a}quivalente Werte gefunden wurden [3]. Die ET Geschwindigkeit wird von zwei Parametern beeinflusst: dem elektronischen Kopplungsmatrixelement und der Regorganisationsenergie \&\#61548;\&\#61472; [4]. Die ET Geschwindigkeit in Donor-substituierten Alkylthiolen wird haupts{\"a}chlich durch \&\#61548; beeinflusst und sogar kleine {\"A}nderungen dieser zeigen eine große Auswirkung auf die zu untersuchenden Prozesse. Aus diesem Grund wird eine Zunahme der ET Geschwindigkeit von Ferrocen (hohe Reorganisationsenergie) {\"u}ber die Phenothiazinverbindung 35 und [Ru(bpy)2(pp)]+ zu den Triarylaminchromophoren 29 und 32 (niedrige Reorganisationsenergie) beobachtet. Weiterhin spielt, im Gegensatz zu Beobachtung von Creager et al. an {\"a}quivalenten Ferrocenverbingungen, die Anbindung des Redoxzentrums an den Alkylspacer eine bedeutende Rolle. Im Falle der elektronenreichen Ether-verbr{\"u}ckten Verbindung 29 wird der ET nicht alleine durch \&\#61548;, sondern ebenso durch mesomere Effekte bestimmt. Bei 29 kommt es durch Lokalisation der positiven Ladung nahe der Ether Funktion formal zu einer Kettenverk{\"u}rzung um eine „Methyleneinheit", welche schließlich in h{\"o}heren ET Geschwindigkeiten resultiert. Im dritten Teil dieser Dissertation wurde ein Serie „molekularer Dr{\"a}hte" bestehend aus Methoxy- oder Chlorid-substituierten Triarylamin- und Phenothiazinverbindungen mit unterschiedlichen Br{\"u}ckeneinheiten und Br{\"u}ckenl{\"a}ngen zwischen Redoxzentrum und Ankerfunktion dargestellt und im Hinblick auf ihr ET Verhalten untersucht. Durch cyclovoltammetrische und UV/Vis-spektroskopische Untersuchungen konnte gezeigt werden, dass sowohl die Oxidationspotentiale als auch die energetischen Zust{\"a}nde der Chromophore recht gut durch Einf{\"u}hrung unterschiedlicher Redoxzentren und Br{\"u}ckeneinheiten beeinflusst werden k{\"o}nnen. Trotz erfolgreicher Kontrolle der Dichte der Chromophoreinheiten in den gemischten Monolagen konnte nur f{\"u}r die Verbindungen 49, 52 und 87 mit Nitril-substituierten Br{\"u}ckeneinheiten verl{\"a}ssliche ET Geschwindigkeiten erhalten werden. Bei diesen Chromphoren ist ein Absinken der ET Geschwindigkeit bei zunehmender Dichte der redoxaktiven Molek{\"u}le in den gemischten Monolagen zu beobachten, welche auf eine {\"A}nderung der Adsorptionsgeometrie hindeutet. Bei zunehmender Packungsdichte der Chromophore f{\"u}hrt dies zu einer aufrechteren Stellung der redoxaktiven Spezies. F{\"u}r alle anderen Verbindungen konnten keine Werte aufgrund der zu schnellen ET Geschwindigkeiten ermittelt werden. Konformelle, wie auch die sehr geringe Abstandsabh{\"a}ngigkeit des ET, resultieren in hohen ET Geschwindigkeiten oder auch ung{\"u}nstige HOMO-LUMO Energien bez{\"u}glich des Donors, der Br{\"u}cke und der Elektrode sind Gr{\"u}nde f{\"u}r dieses Verhalten. Die Tatsache, dass Verbindung 49 und 52 beinahe die gleichen Geschwindigkeitskonstanten des ETs unabh{\"a}ngig von der Anzahl der Br{\"u}ckeneinheiten (n = 2, n = 3) besitzen, deutet darauf hin, dass ein Hopping-Prozess stattfindet, bei welchem eine geringere L{\"a}ngenabh{\"a}ngigkeit des ETs als bei eine Superexchange-Mechanismus zu erwarten ist.}, subject = {Monoschicht}, language = {en} } @phdthesis{KlotzbachverhFimmel2018, author = {Klotzbach [verh. Fimmel], Stefanie}, title = {Synthese und Charakterisierung kovalent organischer K{\"a}figverbindungen basierend auf Tribenzotriquinacen-Einheiten}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-166034}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Porous functional materials are promising candidates for applications in the areas of heterogeneous catalysis, sensing, gas storage and separation, or membranes. As one class of suchlike materials, organic cage compounds have attracted attention because of their unique properties compared to extended frameworks. The tribenzotriquinacene (TBTQ) scaffold possessing three orthogonal indane moieties provides a suitable building block for the efficient synthesis of organic cage compounds. In this thesis the synthesis of molecular cubes, tetrahedra and bipyramids by crosslinking the catechol units of TBTQ with various diboronic acids is reported. Structure and shape of the molecular objects are thereby determined by the geometry of the diboronic acids. Notably, both narcissistic and social self-sorting phenomena could be observed for ternary mixtures of building blocks. In addition host-guest complexation was observed for the trigonal bipyramid cage. Fullerenes C60 as well as C70 were almost quantitively encapsulated. Further investigations of this behaviour showed a preference for C60 in a competitive situation.}, subject = {K{\"a}figverbindungen}, language = {de} } @phdthesis{Kirchner2019, author = {Kirchner, Eva}, title = {Discrete Supramolecular Stacks by Self-Assembly and Folding of Bis(merocyanine) Dyes}, doi = {10.25972/OPUS-15941}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159419}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {The present thesis describes the development of a strategy to create discrete finite-sized supramolecular stacks of merocyanine dyes. Thus, bichromophoric stacks of two identical or different chromophores could be realized by folding of bis(merocyanine) dyes and their optical properties were discussed in terms of exciton theory. Quantum chemical calculations revealed strong exciton coupling between the chromophores within the homo- and hetero-π-stacks and the increase of the J-band of the hetero-dimers with increasing energy difference between the excited states of the chromophores could be attributed not only to the different magnitudes of transition dipole moments of the chromophores but also to the increased localization of the excitation in the respective exciton state. Furthermore, careful selection of the length of the spacer unit that defines the interplanar distance between the tethered chromophores directed the self-assembly of the respective bis(merocyanines) into dimers, trimers and tetramers comprising large, structurally precise π-stacks of four, six or eight merocyanine chromophores. It could be demonstrated that the structure of such large supramolecular architectures can be adequately elucidated by commonly accessible analysis tools, in particular NMR techniques in combination with UV/vis measurements and mass spectrometry. Supported by TDDFT calculations, the absorption spectra of the herein investigated aggregates could be explained and a relationship between the absorption properties and the number of stacking chromophores could be established based on exciton theory.}, subject = {Merocyanine}, language = {en} } @phdthesis{Kaufmann2019, author = {Kaufmann, Christina}, title = {Discrete Supramolecular Architectures of Bay-linked Perylene Bisimide Dimers by Self-Assembly and Folding}, doi = {10.25972/OPUS-17300}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-173005}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics. As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility. By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 {\AA} lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 {\AA} result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 {\AA} larger oligomeric PBI pi-stacks are generated. In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state. In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 {\AA}) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based "null-aggregate" could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 {\AA} defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation. In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly.}, subject = {Supramolekulare Chemie}, language = {en} } @phdthesis{Huber2007, author = {Huber, Valerie}, title = {Selbstorganisation von semisynthetischen Zinkchlorinen zu biomimetischen Lichtsammelsystemen und definierten Nanostrukturen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-24517}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {Diese Arbeit besch{\"a}ftigt sich mit der Selbstorganisation von Zinkchlorin-Farbstoffen, welche sich strukturell von Chlorophyllen ableiten. Im Gegensatz zu allen anderen bakteriellen und pflanzlichen Lichtsammelpigmenten ist es den Bakteriochlorophyllen c, d und e der Lichtsammelsysteme gr{\"u}ner phototropher Bakterien m{\"o}glich, allein durch nichtkovalente Wechselwirkungen zwischen den Farbstoff-Molek{\"u}len, ohne die Beteiligung von Proteinen, r{\"o}hrenf{\"o}rmige Antennensysteme auszubilden, welche die am dichtest gepackten und effizientesten Lichtsammelsysteme in der Natur darstellen. Um einen Betrag zur Aufkl{\"a}rung dieser biologisch wichtigen Aggregate zu leisten, wurden im ersten Teil dieser Arbeit Zinkchlorine als Modellverbindungen f{\"u}r BChl c hergestellt. Mit den neu synthetisierten Zinkchlorinen ist es gelungen, Modellsysteme der nat{\"u}rlichen BChl-Selbstorganisate herzustellen, welche sich im Gegensatz zu den bisher in der Literatur beschriebenen Zinkchlorin-Aggregaten durch eine gute und dauerhafte L{\"o}slichkeit auszeichnen. Diese Eigenschaft erlaubte es sowohl spektroskopische als auch mikroskopische Untersuchungen zur Aufkl{\"a}rung der Aggregatstruktur durchzuf{\"u}hren. Durch Rasterkraftmikroskopie an den Zinkchlorin Aggregaten konnte erstmals ein mikroskopischer Beweis der stabf{\"o}rmigen Struktur von Aggregaten dieser Substanzklasse erhalten werden. Der zweite Teil dieser Arbeit besch{\"a}ftigt sich mit Zinkchlorinen, denen aufgrund einer methylierten 31-Hydroxy-Gruppe die F{\"a}higkeit zur R{\"o}hrenbildung fehlt, die aber durch Koordinationsbindungen und p-p-Wechselwirkungen weiterhin Stapel bilden k{\"o}nnen. Temperaturabh{\"a}ngige UV/Vis- und CD-spektroskopische Studien offenbarten die reversible Bildung von l{\"o}slichen, chiralen Zinkchlorin-Stapelaggregaten. Rasterkraft- und rastertunnelmikroskopische Untersuchungen zeigen die Bildung von zwei Typen p-gestapelter Aggregate auf hoch geordnetem Graphit.}, subject = {Farbstoff}, language = {de} } @phdthesis{Hecht2021, author = {Hecht, Markus}, title = {Liquid-Crystalline Perylene Bisimide and Diketopyrrolopyrrole Assemblies}, doi = {10.25972/OPUS-21698}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-216987}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{Goerl2015, author = {G{\"o}rl, Daniel}, title = {Hydrophobe Effekte bolaamphiphiler Rylenbisimide}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123172}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Die Selbstorganisation von amphiphilen Molek{\"u}len z{\"a}hlt zu den am intensivsten bearbeiteten Forschungsgebieten der Supramolekularen Chemie. Die faszinierenden supramolekularen Architekturen der Natur zeigen eindrucksvoll, wie neuartige Funktionen durch das Zusammenspiel wohl-definierter Molek{\"u}lensembles in einer w{\"a}ssrigen Umgebung entstehen. Es ist bekannt, dass der hydrophobe Effekt dabei eine entscheidende Rolle in der Selbstorganisation spielt und somit die Funktion eines Systems wesentlich bestimmt. Obwohl die Komplexit{\"a}t der bekannten Beispiele aus der Natur unerreicht ist, wurden in den letzten Jahren unz{\"a}hlige k{\"u}nstliche supramolekulare Architekturen basierend auf amphiphilen Molek{\"u}len erschaffen, mit vielf{\"a}ltigen Anwendungsm{\"o}glichkeiten an der Schnittstelle von Chemie, Biologie und Physik. Darunter er{\"o}ffnen insbesondere amphiphile π-konjugierte Systeme einen einfachen Zugang zu vielf{\"a}ltigen Strukturen, da im w{\"a}ssrigen Medium starke π-π-Wechselwirkungen als strukturbildendes Element ausgenutzt werden k{\"o}nnen. Vor allem wegen vielversprechender Anwendungsm{\"o}glichkeiten spiegelt sich die Selbstorganisation solcher Systeme in einem hohen Forschungsinteresse wider. Dennoch ist das Wirken des hydrophoben Effekts in der Selbstassemblierung amphiphiler π-konjugierter Molek{\"u}le weitgehend unverstanden. Die vorliegende Arbeit befasste sich daher mit der Frage, welche physikochemischen Grundprinzipien die Bildung von supramolekularen Polymeren basierend auf amphiphilen π-konjugierten Molek{\"u}len in Wasser steuern und wie der hydrophobe Effekt die Funktionalit{\"a}t solcher Strukturen beeinflusst. Bolaamphiphile Perylenbisimide (PBIs) und Naphthalinbisimide (NBIs) erwiesen sich dabei f{\"u}r das Molek{\"u}ldesign als besonders geeignet, weil sie vergleichsweise einfach dargestellt werden k{\"o}nnen, ihre hohe Symmetrie weniger komplexe Assoziationsprozesse begr{\"u}ndet und die Untersuchung ihrer Selbstassemblierung im w{\"a}ssrigen Medium weiterhin einen Vergleich erlaubt, wie sich der hydrophobe Effekt bez{\"u}glich unterschiedlich großen π-Systemen auswirkt. Es konnte gezeigt werden, dass OEG-basierte Rylenbisimide unter bestimmten strukturgeometrischen Voraussetzungen eine entropiegetriebene Aggregation aufweisen, wenn die Freisetzung von Wassermolek{\"u}len aus einer wohl-definierten Hydrath{\"u}lle ausreicht, um den Enthalpiegewinn aus den im w{\"a}ssrigen Medium verst{\"a}rkten Dispersionswechselwirkungen zwischen den π-Fl{\"a}chen zu {\"u}bertreffen. Im vorliegenden Fall wurde dies durch das Pinsel-Strukturmotiv der symmetrisch angebrachten Imidsubstituenten erreicht, f{\"u}r die sich damit einhergehend eine g{\"a}nzlich andere Temperaturabh{\"a}ngigkeit beobachten ließ und somit eine g{\"a}nzlich andere Funktionalit{\"a}t, als man sie aus organischen L{\"o}sungsmitteln kennt. Wasser als L{\"o}sungsmittel f{\"u}hrt also nicht nur zu einer signifikanten Bindungsverst{\"a}rkung, sondern {\"o}ffnet Zugang zu supramolekularen Systemen mit neuartigen Funktionen. Die entropiegetriebene Freisetzung von Wassermolek{\"u}len konnte daher im Rahmen dieser Arbeit ausgenutzt werden, um gleichzeitig die intrinsische Ordnung im π-Stapel von PBIs zu erh{\"o}hen, was anhand eines temperatursensorischen Hydrogels anschaulich demonstriert wurde. Dar{\"u}ber hinaus stellte sich heraus, dass Wasser ein geeignetes L{\"o}sungsmittel zur Darstellung supramolekularer Kompositmaterialien ist. Wie anhand sich instantan bildender Co-Aggregate gezeigt wurde, ist die entropiegetriebene Assemblierung der entscheidende Faktor zur Darstellung von komplexeren supramolekularen Strukturen, die {\"u}berdies einen Schritt hin zu den hochkomplexen multimolekularen Anordnungen der Natur darstellen.}, subject = {Selbstorganisation}, language = {de} } @phdthesis{Fetsch2014, author = {Fetsch, Corinna}, title = {Polypeptoide - Synthese und Charakterisierung}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-109157}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Die vorliegende Arbeit befasste sich mit der bisher relativ unbekannten Polymerklasse der Polypeptoide, die hinsichtlich ihrer Verwendung als Biomaterial n{\"a}her untersucht werden sollte. Hierbei war die Untersuchung des Polymerisationssystems ein wesentlicher Schwerpunkt. Dies beinhaltete zum einen die Synthesen verschiedener Monomere sowie deren Polymerisationskinetiken und zum anderen Studien {\"u}ber die Stabilit{\"a}t des aktiven Kettenendes. Um mehr {\"u}ber die Polypeptoide zu erfahren, wurden die erhaltenen Homopolymere nach der Strukturanalyse hinsichtlich ihrer physikochemischen Eigen-schaften untersucht. Im Anschluss erfolgte die Synthese von (amphiphilen) Blockco-polypeptoiden, die sich in w{\"a}ssrigen L{\"o}sungen zu definierten Morphologien zusammen-lagern. Die resultierenden Morphologien, sowohl mizellare als auch vesikul{\"a}re Strukturen, wurden mit verschiedenen Methoden, wie z. B. der Pyren-Fluoreszenz-Spektroskpie und der dynamischen Lichtstreuung, untersucht. Erste Erkenntnisse {\"u}ber die Biokompatibilit{\"a}t der Polypeptoide sollte die Bestimmung der Zellviabilit{\"a}t in verschiedenen Polymerl{\"o}sungen liefern. Die verschiedenen Studien {\"u}ber die Polypeptoide zeigten, dass diese Polymerklasse {\"u}ber eine besonders lebende Polymerisation synthetisiert werden kann. Dabei resultieren Produkte, die sich durch eine Poisson-Verteilung und eine hohe Endgruppengenauigkeit auszeichnen. Zus{\"a}tzlich bestehen Polypeptoide aus einem abbaubaren R{\"u}ckgrat und, im Vergleich zu den Polypeptiden, besitzen sie eine erh{\"o}hte proteolytische Stabilit{\"a}t. Amphiphile Blockcopolypeptoide sind zudem in der Lage, sich in L{\"o}sung zu verschiedenen Morphologien anzuordnen. Durch die Variierung der Seitenkette und des f kann sowohl die Selbstorganisation als auch das Mikroumfeld der Aggregate abgestimmt werden. Dar{\"u}ber hinaus k{\"o}nnen die amphiphile Blockcopolymere, die sich zu Mizellen anordnen, hydrophobe Substanzen solubilisieren. Polypeptoide liefern all die n{\"o}tige chemische Vielseitigkeit und potentielle Biokompatibilit{\"a}t, um bestehende sowie neuartige Probleme in biomedizinischen Anwendungen zu bew{\"a}ltigen. Zuk{\"u}nftige in vivo und in vitro Test werden das Potential, aber auch die Grenzen dieser neuen Polymerklasse als Biomaterial zeigen.}, subject = {Polymerisation}, language = {de} } @phdthesis{Dhara2017, author = {Dhara, Ayan}, title = {Stimuli-Responsive Self-Assembly and Spatial Functionalization of Organic Cages Based on Tribenzotriquinacenes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-154762}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {Within this thesis, synthetic strategies for self-assembled organic cage compounds have been developed that allow for both stimuli-responsive control over assembly/disassembly processes and spatial control over functionalization. To purposefully operate the reversible assembly of organic cages, boron-nitrogen dative bonds have been exploited for the formation of a well-defined, discrete bipyramidal organic assembly in solution. Thermodynamic association equilibria for cage formation have been investigated by Isothermal Titration Calorimetry (ITC). Temperature-dependent NMR studies revealed a reversible cage opening upon heating and quantitative reassembly upon cooling. For the spatial functionalization of organic cages, two divergent molecular building units have been designed and synthesized, namely tribenzotriquinacene derivatives possessing a terminal alkyne moiety at the apical position and a meta-diboronic acid having a pyridyl group at the 2-position. Facile access to a variety of apically functionalized tribenzotriquinacenes has been illustrated by post-synthetic modifications at the terminal alkyne group by Sonogashira cross-coupling and azide-alkyne click reactions. Finally, these apically functionalized tribenzotriquinacene building blocks have been implemented into boronate ester-based organic cage compounds showing modular exohedral functionalities.}, subject = {Selbstorganisation}, language = {en} } @phdthesis{Chen2006, author = {Chen, Zhijian}, title = {pi-Stacks Based on Self-Assembled Perylene Bisimides : Structural, Optical, and Electronic Properties}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-19940}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2006}, abstract = {As a traditional industrial pigment, perylene bisimide (PBI) dyes have found wide-spread applications. In addition, PBI dyes have been considered as versatile and promising functional materials for organic-based electronic and optic devices, such as transistors and solar cells. For these novel demands, the control of self-organization of this type of dye and the investigation of the relationship between the supramolecular structure and the relevant optical and electronic properties is of great importance. The objective of this thesis focuses on gaining a better understanding of structural and functional properties of pi-stacks based on self-assembling PBIs. Studies include the synthesis and characterization of new functional PBI dyes, their aggregation in solution, in liquid crystalline state and on surfaces, and their fluorescence and charge transport properties. An overview of the formation, thermodynamics and structures of pi-stacks of functional pi- conjugated molecules in solution and in liquid crystalline phases is given in Chapter 2. Chapters 3 and 4 deal with the pi-pi aggregates of new, highly fluorescent PBIs without core-substituents. In Chapter 3, the self-assembly of a PBI with tridodecylphenyl substituents at imide N atoms both in solution and condensed phase has been studied in great detail. In condensed state, the dye exhibits a hexagonal columnar liquid crystalline (LC) phase as confirmed by DSC, OPM and X-ray diffraction analysis. The columnar stacking of this dye has been further confirmed by atomic force microscopy (AFM) where single columns could be well resolved The charge transport properties this dye have been investigated by pulse radiolysis-time resolved microwave conductivity (PR-TRMC) measurements. To shed more light on the nature of the pi-pi interaction of the unsubstituted PBIs, solvent depend aggregation properties have been investigated in Chapter 4. The studies are further extended from core-unsubstituted PBIs to core-substituted ones (Chapter 5 and 6). In Chapter 5, a series of highly soluble and fluorescent core-twisted PBIs that bear the same trialkylphenyl groups at the imide positions but different bay-substituents and were synthesized. These compounds are characterized by distortions of the perylene planes with dihedral angles in the range of 15-37° according to crystallographic data and molecular modeling studies. In contrast to the extended oligomeric aggregates formed for planar unsubstituted PBIs, this family of dyes formed discrete pi-pi-stacked dimers in apolar methylcyclohexane as concentration-dependent UV/Vis measurements and VPO analysis revealed. The Gibbs free energy of dimerization can be correlated with the twist angles of the dyes linearly. In condensed state, several of these PBIs form luminescent rectangular or hexagonal columnar liquid crystalline phases with low isotropization temperatures. The core-twisting effect on semiconducting properties has been examined in Chapter 6. In this chapter, a comparative study of the electrochemical and the charge transport properties of a series of non-substituted and chlorine-functionalized PBIs was performed. While Chapters 3-6 focus on one-component dye systems, Chapter 7 explored the possibility of a supramolecular engineering of co-aggregates formed by hydrogen-bonded 2:1 and 1:1 complex of oligo(p-phenylene vinylene)s (OPVs) and PBIs. Covalently linked donor-acceptor dye arrays have been prepared for comparison. Concentration and temperature-dependent UV/Vis spectroscopy revealed all hydrogen-bonded and covalent systems form well-ordered J-type aggregates in methylcyclohexane. With these hydrogen-bonded OPV-PBI complexes, fibers containing p-type and n-type molecules can be prepared on the nano-scale (1-20 nm). For the 2:1 OPV-PBI hydrogenbonded arrays hierarchically assembled chiral superstructures consisting of left-handed helical pi-pi co-aggregates (CD spectroscopy) of the two dyes that further assemble into right-handed nanometer-scale supercoils in the solid state (AFM study) have been observed. All of these well-defined OPV-PBI assemblies presented here exhibit photoinduced electron transfer on sub-ps timescale, while the electron recombination differs for different systems.Thus, it was suggested that such assemblies of p- and n-type semiconductors might serve as valuable nanoscopic functional units for organic electronics.}, subject = {Perylenderivate}, language = {en} }