@article{MenekseMahlAlbertetal.2023,
  author    = {Menekse, Kaan and Mahl, Magnus and Albert, Julius and Niyas, M. A. and Shoyama, Kazutaka and Stolte, Matthias and W{\"u}rthner, Frank},
  title     = {Supramolecularly Engineered Bulk-Heterojunction Solar Cells with Self-Assembled Non-Fullerene Nanographene Tetraimide Acceptors},
  series = {Solar RRL},
  volume    = {7},
  journal   = {Solar RRL},
  number    = {2},
  doi       = {10.1002/solr.202200895},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-312099},
  year      = {2023},
  abstract  = {A series of novel imide-functionalized C\(_{64}\) nanographenes is investigated as acceptor components in organic solar cells (OSCs) in combination with donor polymer PM6. These electron-poor molecules either prevail as a monomer or self-assemble into dimers in the OSC active layer depending on the chosen imide substituents. This allows for the controlled stacking of electron-poor and electron-rich π-scaffolds to establish a novel class of non-fullerene acceptor materials to tailor the bulk-heterojunction morphology of the OSCs. The best performance is observed for derivatives that are able to self-assemble into dimers, reaching power conversion efficiencies of up to 7.1\%.},
  language  = {en}
}
@article{KimSchembriBialasetal.2022,
  author    = {Kim, Jin Hong and Schembri, Tim and Bialas, David and Stolte, Matthias and W{\"u}rthner, Frank},
  title     = {Slip-Stacked J-Aggregate Materials for Organic Solar Cells and Photodetectors},
  series = {Advanced Materials},
  volume    = {34},
  journal   = {Advanced Materials},
  number    = {22},
  doi       = {10.1002/adma.202104678},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-276537},
  year      = {2022},
  abstract  = {Dye-dye interactions affect the optical and electronic properties in organic semiconductor films of light harvesting and detecting optoelectronic applications. This review elaborates how to tailor these properties of organic semiconductors for organic solar cells (OSCs) and organic photodiodes (OPDs). While these devices rely on similar materials, the demands for their optical properties are rather different, the former requiring a broad absorption spectrum spanning from the UV over visible up to the near-infrared region and the latter an ultra-narrow absorption spectrum at a specific, targeted wavelength. In order to design organic semiconductors satisfying these demands, fundamental insights on the relationship of optical properties are provided depending on molecular packing arrangement and the resultant electronic coupling thereof. Based on recent advancements in the theoretical understanding of intermolecular interactions between slip-stacked dyes, distinguishing classical J-aggregates with predominant long-range Coulomb coupling from charge transfer (CT)-mediated or -coupled J-aggregates, whose red-shifts are primarily governed by short-range orbital interactions, is suggested. Within this framework, the relationship between aggregate structure and functional properties of representative classes of dye aggregates is analyzed for the most advanced OSCs and wavelength-selective OPDs, providing important insights into the rational design of thin-film optoelectronic materials.},
  language  = {en}
}
@phdthesis{HechtgebWagener2019,
  author    = {Hecht [geb. Wagener], Reinhard Johannes},
  title     = {Processing and Characterization of Bulk Heterojunction Solar Cells Based on New Organic n-Type Semiconductors},
  doi       = {10.25972/OPUS-16138},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161385},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {This thesis established the fabrication of organic solar cells of DA dye donors and fullerene acceptors under ambient conditions in our laboratory, however, with reduced power conversion efficiencies compared to inert conditions. It was shown that moisture had the strongest impact on the stability and reproducibility of the solar cells. Therefore, utilization of robust materials, inverted device architectures and fast fabrication/characterization are recommended if processing takes place in air. Furthermore, the dyad concept was successfully explored in merocyanine dye-fullerene dyads and power conversion efficiencies of up to 1.14 \% and 1.59 \% were measured under ambient and inert conditions, respectively. It was determined that the major drawback in comparison to comparable BHJ devices was the inability of the dyad molecules to undergo phase separation. Finally, two series of small molecules were designed in order to obtain electron transport materials, using the acceptor-core-acceptor motive. By variation of the acceptor units especially the LUMO levels could be lowered effectively. Investigation of the compounds in organic thin film transistors helped to identify promising molecules with electron transport properties. Electron transport mobilities of up to 7.3 × 10-2 cm2 V-1 s-1 (ADA2b) and 1.39 × 10-2 cm2 V-1 s-1 (AπA1b) were measured in air for the ADA and AπA dyes, respectively. Investigation of selected molecules in organic solar cells proved that these molecules work as active layer components, even though power conversion efficiencies cannot compete with fullerene based devices yet. Thus, this thesis shows new possibilities that might help to develop and design small molecules as substitutes for fullerene acceptors.},
  subject      = {Heterosolarzelle},
  language  = {en}
}
@phdthesis{Buerckstuemmer2011,
  author    = {B{\"u}rckst{\"u}mmer, Hannah},
  title     = {Merocyanine dyes for solution-processed organic bulk heterojunction solar cells},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-66879},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {The technology of organic photovoltaics offers the possibility of low-cost devices due to easy fabrication procedures and low material consumption and at the same time high flexibility concerning the applied substrates or design features such as the color palette. Owing to these benefits, this research field is highly active, being reflected by the continuously rising number of publications. Chapter 1 gives an extensive overview of a part of these reports, namely the field of solution-processed BHJ organic solar cells using small molecules as electron-donating materials. In the early years of this research area (2006-2008), well known hole transporting materials such as triphenylamine based chromophores, oligothiophenes and polyaromatic hydrocarbons were applied. However, many of these dyes lacked absorption at longer wavelengths and were therefore limited in their light harvesting qualities. Later, chromophores based on low band gap systems consisting of electron-donating and electron-accepting units showing internal charge transfer overcame this handicap. Today, donor-substituted diketopyrrolopyrroles (D-A-D chromophores), squaraines (D-A-D chromophores) and acceptor substituted oligothiophenes (A-D-A chromophores) are among the most promising dyes for small molecule based organic solar cells with PCEs of 4-5\%. This work is based on the findings of the groups of W{\"u}rthner and Meerholz, which tested merocyanine dyes for the first time in organic BHJ solar cells.4 According to the B{\"a}ssler theory85, the high dipolarity of these dyes should hamper the charge transport, but the obtained first results with PCE of 1.7\% proved the potenital of this class of dyes for this application. Merocyanine dyes offer the advantages of facile synthesis and purification, high tinctorial strength and monodispersity. Additionally, the electronic structure of the dyes, namely the absorption as well as the electrochemical properties, can be adjusted by using the right combination of donor and acceptor units. For these reasons, this class of dye is highly interesting for the application in organic solar cells. It was the aim of the thesis to build more knowledge about the potential and limitations of merocyanines in BHJ photovoltaic devices. By screening a variety of donor and acceptor groups a comprehensive data set both for the molecular materials as well as for the respective solar devices was generated and analyzed. As one focus, the arrangement of the chromophores in the solid state was investigated to gain insight about the packing in the solar cells and its relevance for the performance of the latter. To do so, X-ray single crystal analyses were performed for selected molecules. By means of correlations between molecular properties and the characteristics of the corresponding solar cells, several design rules to generate efficient chromophores for organic photovoltaics were developed. The different donor and acceptor moieties applied in this work are depicted in the following ...},
  subject      = {organische Solarzelle},
  language  = {en}
}