@article{WolfBrandstetterBeutnerHessetal.2020,
  author    = {Wolf-Brandstetter, C and Beutner, R and Hess, R and Bierbaum, S and Wagner, K and Scharnweber, D and Gbureck, U and Moseke, C},
  title     = {Multifunctional calcium phosphate based coatings on titanium implants with integrated trace elements},
  series = {Biomedical Materials},
  volume    = {15},
  journal   = {Biomedical Materials},
  number    = {2},
  doi       = {10.1088/1748-605X/ab5d7b},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-254085},
  year      = {2020},
  abstract  = {For decades, the main focus of titanium implants developed to restore bone functionality was on improved osseointegration. Additional antimicrobial properties have now become desirable, due to the risk that rising antibiotic resistance poses for implant-associated infections. To this end, the trace elements of copper and zinc were integrated into calcium phosphate based coatings by electrochemically assisted deposition. In addition to their antimicrobial activity, zinc is reported to attract bone progenitor cells through chemotaxis and thus increase osteogenic differentiation, and copper to stimulate angiogenesis. Quantities of up to 68.9 ± 0.1 μg cm\(^{-2}\) of copper and 56.6 ± 0.4 μg cm\(^{-2}\) of zinc were deposited; co-deposition of both ions did not influence the amount of zinc but slightly increased the amount of copper in the coatings. The release of deposited copper and zinc species was negligible in serum-free simulated body fluid. In protein-containing solutions, a burst release of up to 10 μg ml\(^{-1}\) was observed for copper, while zinc was released continuously for up to 14 days. The presence of zinc was beneficial for adhesion and growth of human mesenchymal stromal cells in a concentration-dependent manner, but cytotoxic effects were already visible for coatings with an intermediate copper content. However, co-deposited zinc could somewhat alleviate the adverse effects of copper. Antimicrobial tests with E. coli revealed a decrease in adherent bacteria on brushite without copper or zinc of 60\%, but if the coating contained both ions there was almost no bacterial adhesion after 12 h. Coatings with high zinc content and intermediate copper content had the overall best multifunctional properties.},
  language  = {en}
}
@article{HolstHolstHirschfelderetal.2012,
  author    = {Holst, Alexandra Ioana and Holst, Stefan and Hirschfelder, Ursula and von Seckendorff, Volker},
  title     = {Retrieval analysis of different orthodontic brackets: the applicability of electron microprobe techniques for determining material heterogeneities and corrosive potential},
  series = {Journal of applied oral science},
  volume    = {20},
  journal   = {Journal of applied oral science},
  number    = {4},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-130415},
  pages     = {478- 485},
  year      = {2012},
  abstract  = {Objective: The objective of this study was to investigate the applicability of microanalytical methods with high spatial resolution to the characterization of the composition and corrosion behavior of two bracket systems. Material and methods: The surfaces of six nickel-free brackets and six nickel-containing brackets were examined for signs of corrosion and qualitative surface analysis using an electron probe microanalyzer (EPMA), prior to bonding to patient's tooth surfaces and four months after clinical use. The surfaces were characterized qualitatively by secondary electron (SE) images and back scattered electron (BSE) images in both compositional and topographical mode. Qualitative and quantitative wavelength-dispersive analyses were performed for different elements, and by utilizing qualitative analysis the relative concentration of selected elements was mapped two-dimensionally. The absolute concentration of the elements was determined in specially prepared brackets by quantitative analysis using pure element standards for calibration and calculating correction-factors (ZAF). Results: Clear differences were observed between the different bracket types. The nickel-containing stainless steel brackets consist of two separate pieces joined by a brazing alloy. Compositional analysis revealed two different alloy compositions, and reaction zones on both sides of the brazing alloy. The nickel-free bracket was a single piece with only slight variation in element concentration, but had a significantly rougher surface. After clinical use, no corrosive phenomena were detectable with the methods applied. Traces of intraoral wear at the contact areas between the bracket slot and the arch wire were verified. Conclusion: Electron probe microanalysis is a valuable tool for the characterization of element distribution and quantitative analysis for corrosion studies.},
  language  = {en}
}
@article{GoettelGaoDotzaueretal.2020,
  author    = {Goettel, James T. and Gao, Haopeng and Dotzauer, Simon and Braunschweig, Holger},
  title     = {\(^{Me}\)CAAC=N\(^{-}\): A Cyclic (Alkyl)(Amino)Carbene Imino Ligand},
  series = {Chemistry - A European Journal},
  volume    = {26},
  journal   = {Chemistry - A European Journal},
  number    = {5},
  doi       = {10.1002/chem.201904715},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-212662},
  pages     = {1136-1143},
  year      = {2020},
  abstract  = {A cyclic (alkyl)(amino)carbene (CAAC) has been shown to react with a covalent azide similar to the Staudinger reaction. The reaction of \(^{Me}\)CAAC with trimethylsilyl azide afforded the N-silylated 2-iminopyrrolidine (\(^{Me}\)CAAC=NSiMe\(_{3}\)), which was fully characterized. This compound undergoes hydrolysis to afford the 2-iminopyrrolidine and trimethylsiloxane which co-crystallize as a hydrogen-bonded adduct. The N-silylated 2-iminopyrrolidine was used to transfer the novel pyrrolidine-2-iminato ligand onto both main-group and transition-metal centers. The reaction of the tetrabromodiborane bis(dimethyl sulfide) adduct with two equivalents of \(^{Me}\)CAAC=NSiMe\(_{3}\) afforded the disubstituted diborane. The reaction of \(^{Me}\)CAAC=NSiMe\(_{3}\) with TiCl\(_{4}\) and CpTiCl\(_{3}\) afforded \(^{Me}\)CAAC=NTiCl\(_{3}\) and \(^{Me}\)CAAC=NTiCl\(_{2}\)Cp, respectively.},
  language  = {en}
}
@article{FoehrenbacherKrahfussZapfetal.2021,
  author    = {F{\"o}hrenbacher, Steffen A. and Krahfuss, Mirjam J. and Zapf, Ludwig and Friedrich, Alexandra and Ignat'ev, Nikolai V. and Finze, Maik and Radius, Udo},
  title     = {Tris(pentafluoroethyl)difluorophosphorane: a versatile fluoride acceptor for transition metal chemistry},
  series = {Chemistry Europe},
  volume    = {27},
  journal   = {Chemistry Europe},
  number    = {10},
  doi       = {10.1002/chem.202004885},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256665},
  pages     = {3504-3516},
  year      = {2021},
  abstract  = {Fluoride abstraction from different types of transition metal fluoride complexes [L\(_n\)MF] (M=Ti, Ni, Cu) by the Lewis acid tris(pentafluoroethyl)difluorophosphorane (C\(_2\)F\(_5\))\(_3\)PF\(_2\) to yield cationic transition metal complexes with the tris(pentafluoroethyl)trifluorophosphate counterion (FAP anion, [(C\(_2\)F\(_5\))\(_3\)PF\(_3\)]\(^-\)) is reported. (C\(_2\)F\(_5\))\(_3\)PF\(_2\) reacted with trans-[Ni(iPr\(_2\)Im)\(_2\)(Ar\(^F\))F] (iPr2Im=1,3-diisopropylimidazolin-2-ylidene; Ar\(^F\)=C\(_6\)F\(_5\), 1 a; 4-CF\(_3\)-C\(_6\)F\(_4\), 1 b; 4-C\(_6\)F\(_5\)-C\(_6\)F\(_4\), 1 c) through fluoride transfer to form the complex salts trans-[Ni(iPr\(_2\)Im)\(_2\)(solv)(Ar\(^F\))]FAP (2 a-c[solv]; solv=Et\(_2\)O, CH\(_2\)Cl\(_2\), THF) depending on the reaction medium. In the presence of stronger Lewis bases such as carbenes or PPh\(_3\), solvent coordination was suppressed and the complexes trans-[Ni(iPr\(_2\)Im)\(_2\)(PPh\(_3\))(C\(_6\)F\(_5\))]FAP (trans-2 a[PPh\(_3\)]) and cis-[Ni(iPr\(_2\)Im)\(_2\)(Dipp\(_2\)Im)(C\(_6\)F\(_5\))]FAP (cis-2 a[Dipp\(_2\)Im]) (Dipp\(_2\)Im=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were isolated. Fluoride abstraction from [(Dipp\(_2\)Im)CuF] (3) in CH\(_2\)Cl\(_2\) or 1,2-difluorobenzene led to the isolation of [{(Dipp\(_2\)Im)Cu}\(_2\)]\(^2\)\(^+\)2 FAP\(^-\) (4). Subsequent reaction of 4 with PPh\(_3\) and different carbenes resulted in the complexes [(Dipp\(_2\)Im)Cu(LB)]FAP (5 a-e, LB=Lewis base). In the presence of C6Me6, fluoride transfer afforded [(Dipp\(_2\)Im)Cu(C\(_6\)Me\(_6\))]FAP (5 f), which serves as a source of [(Dipp\(_2\)Im)Cu)]\(^+\). Fluoride abstraction of [Cp\(_2\)TiF\(_2\)] (7) resulted in the formation of dinuclear [FCp\(_2\)Ti(μ-F)TiCp\(_2\)F]FAP (8) (Cp=η\(^5\)-C\(_5\)H\(_5\)) with one terminal fluoride ligand at each titanium atom and an additional bridging fluoride ligand.},
  language  = {en}
}