@phdthesis{Massih2024,
  author    = {Massih, Bita},
  title     = {Human stem cell-based models to analyze the pathophysiology of motor neuron diseases},
  publisher = {Frontiers in Cell and Developmental Biology},
  doi       = {10.25972/OPUS-34637},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-346374},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2024},
  abstract  = {Motor neuron diseases (MNDs) encompass a variety of clinically and genetically heterogeneous disorders, which lead to the degeneration of motor neurons (MNs) and impaired motor functions. MNs coordinate and control movement by transmitting their signal to a target muscle cell. The synaptic endings of the MN axon and the contact site of the muscle cell thereby form the presynaptic and postsynaptic structures of the neuromuscular junction (NMJ). In MNDs, synaptic dysfunction and synapse elimination precede MN loss suggesting that the NMJ is an early target in the pathophysiological cascade leading to MN death. In this study, we established new experimental strategies to analyze human MNDs by patient derived induced pluripotent stem cells (iPSCs) and investigated pathophysiological mechanisms in two different MNDs. To study human MNDs, specialized cell culture systems that enable the connection of MNs to their target muscle cells are required to allow the formation of NMJs. In the first part of this study, we established and validated a human neuromuscular co-culture system consisting of iPSC derived MNs and 3D skeletal muscle tissue derived from myoblasts. We generated 3D muscle tissue by culturing primary myoblasts in a defined extracellular matrix in self-microfabricated silicone dishes that support the 3D tissue formation. Subsequently, iPSCs from healthy donors and iPSCs from patients with the progressive MND Amyotrophic Lateral Sclerosis (ALS) were differentiated into MNs and used for 3D neuromuscular co-cultures. Using a combination of immunohistochemistry, calcium imaging, and pharmacological stimulations, we characterized and confirmed the functionality of the 3D muscle tissue and the 3D neuromuscular co-cultures. Finally, we applied this system as an in vitro model to study the pathophysiology of ALS and found a decrease in neuromuscular coupling, muscle contraction, and axonal outgrowth in co-cultures with MNs harboring ALS-linked superoxide dismutase 1 (SOD1) mutation. In summary, this co-culture system presents a human model for MNDs that can recapitulate aspects of ALS pathophysiology. In the second part of this study, we identified an impaired unconventional protein secretion (UPS) of Sod1 as pathological mechanisms in Pleckstrin homology domain-containing family G member 5 (Plekhg5)-associated MND. Sod1 is a leaderless cytosolic protein which is secreted in an autophagy-dependent manner. We found that Plekhg5 depletion in primary MNs and NSC34 cells leads to an impaired secretion of wildtype Sod1, indicating that Plekhg5 drives the UPS of Sod1 in vitro. By interfering with different steps during the biogenesis of autophagosomes, we could show that Plekhg5-regulated Sod1 secretion is determined by autophagy. To analyze our findings in a clinically more relevant model we utilized human iPSC MNs from healthy donors and ALS patients with SOD1 mutations. We observed reduced SOD1 secretion in ALS MNs which coincides with reduced protein expression of PLEKHG5 compared to healthy and isogenic control MNs. To confirm this correlation, we depleted PLEKHG5 in control MNs and found reduced extracellular SOD1 levels, implying that SOD1 secretion depends on PLEKHG5. In summary, we found that Plekh5 regulates the UPS of Sod1 in mouse and human MNs and that Sod1 secretion occurs in an autophagy dependent manner. Our data shows an unreported mechanistic link between two MND-associated proteins.},
  subject      = {Tissue Engineering},
  language  = {en}
}
@phdthesis{Janzen2022,
  author    = {Janzen, Dieter},
  title     = {Functional analysis of ion channels and neuronal networks in 2D and 3D \(in\) \(vitro\) cell culture models},
  doi       = {10.25972/OPUS-25170},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251700},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2022},
  abstract  = {In the central nervous system, excitatory and inhibitory signal transduction processes are mediated by presynaptic release of neurotransmitters, which bind to postsynaptic receptors. Glycine receptors (GlyRs) and GABAA receptors (GABAARs) are ligand-gated ion channels that enable synaptic inhibition. One part of the present thesis elucidated the role of the GlyRα1 β8 β9 loop in receptor expression, localization, and function by means of amino acid substitutions at residue Q177. This residue is underlying a startle disease phenotype in the spontaneous mouse model shaky and affected homozygous animals are dying 4-6 weeks after birth. The residue is located in the β8 β9 loop and thus part of the signal transduction unit essential for proper ion channel function. Moreover, residue Q177 is involved in a hydrogen network important for ligand binding. We observed no difference in ion channel trafficking to the cellular membrane for GlyRα1Q177 variants. However, electrophysiological measurements demonstrated reduced glycine, taurine, and β alanine potency in comparison to the wildtype protein. Modeling revealed that some GlyRα1Q177 variants disrupt the hydrogen network around residue Q177. The largest alterations were observed for the Q177R variant, which displayed similar effects as the Q177K mutation present in shaky mice. Exchange with structurally related amino acids to the original glutamine preserved the hydrogen bond network. Our results underlined the importance of the GlyR β8 β9 loop for proper ion channel gating. GlyRs as well as GABAARs can be modulated by numerous allosteric substances. Recently, we focused on monoterpenes from plant extracts and showed positive allosteric modulation of GABAARs. Here, we focused on the effect of 11 sesquiterpenes and sesquiterpenoids (SQTs) on GABAARs. SQTs are compounds naturally occurring in plants. We tested SQTs of the volatile fractions of hop and chamomile, including their secondary metabolites generated during digestion. Using the patch-clamp technique on transfected cells and neurons, we were able to observe significant GABAAR modulation by some of the compounds analyzed. Furthermore, a possible binding mechanism of SQTs to the neurosteroid binding site of the GABAAR was revealed by modeling and docking studies. We successfully demonstrated GABAAR modulation by SQTs and their secondary metabolites. The second part of the thesis investigated three-dimensional (3D) in vitro cell culture models which are becoming more and more important in different part of natural sciences. The third dimension allows developing of complex models closer to the natural environment of cells, but also requires materials with mechanical and biological properties comparable to the native tissue of the encapsulated cells. This is especially challenging for 3D in vitro cultures of primary neurons and astrocytes as the brain is one of the softest tissues found in the body. Ultra-soft matrices that mimic the neuronal in vivo environment are difficult to handle. We have overcome these challenges using fiber scaffolds created by melt electrowriting to reinforce ultra-soft matrigel. Hence, the scaffolds enabled proper handling of the whole composites and thus structural and functional characterizations requiring movement of the composites to different experimental setups. Using these scaffold-matrigel composites, we successfully established methods necessary for the characterization of neuronal network formation. Before starting with neurons, a mouse fibroblast cell line was seeded in scaffold-matrigel composites and transfected with the GlyR. 3D cultured cells displayed high viability, could be immunocytochemically stained, and electrophysiologically analyzed. In a follow-up study, primary mouse cortical neurons in fiber-reinforced matrigel were grown for up to 21 days in vitro. Neurons displayed high viability, and quantification of neurite lengths and synapse density revealed a fully formed neuronal network already after 7 days in 3D culture. Calcium imaging and patch clamp experiments demonstrated spontaneous network activity, functional voltage-gated sodium channels as well as action potential firing. By combining ultra-soft hydrogels with fiber scaffolds, we successfully created a cell culture model suitable for future work in the context of cell-cell interactions between primary cells of the brain and tumor cells, which will help to elucidate the molecular pathology of aggressive brain tumors and possibly other disease mechanisms.},
  subject      = {Zellkultur},
  language  = {en}
}
@phdthesis{Bruehlmann2017,
  author    = {Br{\"u}hlmann, David},
  title     = {Tailoring Recombinant Protein Quality by Rational Media Design},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-147345},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {Nowadays, more than half of the biotherapeutics are produced in mammalian cell lines as a result of correct protein folding and assembly as well as their faculty to bring about a variety of post-translational modifications. The widespread progression of biosimilars has moved the focus in mammalian cell-culture process development. Thereby, the modulation of quality attributes of recombinant therapeutic proteins has increasingly gained importance from early process development stages. Protein quality directly shapes the clinical efficacy and safety in vivo, and therefore, the control of the complex post-translational modifications, such as glycosylation (e.g. high mannose, fucosylation, galactosylation and sialylation), charge variants, aggregates and low-molecular-weight species formation, is pivotal for efficient receptor binding and for triggering the desired immune responses in patients. In the frame of biosimilar development, product quality modulation methods using the potential of the host cell line are particularly sought after to match the quality profile of the targeted reference medicinal product (RMP) as closely as possible. The environment the cell is dwelling in directly influences its metabolism and the resulting quality profile of the expressed protein. Thereby the cell culture medium plays a central role in upstream manufacturing. In this work, concentration adjustment of selected media components and supplementation with a variety of compounds was performed to alter various metabolic pathways, enzyme activities and in some cases the gene expression levels of Chinese Hamster Ovary (CHO) cells in culture. The supplementation of cell culture medium with the trisaccharide raffinose in fed-batch cultures entailed an increase of the abundance of high mannose glycans in two different CHO cell lines. Raffinose especially favored mannose 5 glycans. At the same time, it impaired cell culture performance, induced changes on the intracellular nucleotide levels and even varied the expression levels of glycosylation-related genes. Supplementation with a number of galactosyltransferase inhibiting compounds, in particular fluorinated galactose analogs (alpha- and beta-2F-peracetyl-galactose), consistently decreased the production of galactosylated monoclonal antibodies (mAb). By means of targeted addition during the culture rather than at the beginning, the inhibition was further increased, while limiting detrimental effects on both growth and productivity. High-throughput screening in 96-deepwell plates showed that spermine and L-ornithine also reduced the level of galactosylation. On the other hand, exploratory screening of a variety of potentially disulfide-bridge-reducing agents highlighted that the inherent low-molecular-species level of the proprietary platform cell culture process was likely due to favored reduction. This hypothesis was reinforced by the observation that supplementation of cysteine and N-acetylcysteine promoted fragmentation. Additionally, fragmentation decreased with higher protein expression. At that point, aiming to improve the efficiency in process development, a rational experimental design method was developed to identify and to define the optimal concentration range of quality modulating compounds by calling on a combination of high throughput fed-batch testing and multivariate data analysis. Seventeen medium supplements were tested in five parallel 96-deepwell plate experiments. The selection process of promising modulators for the follow-up experiment in shake tubes consisted in a three-step procedure, including principal component analysis, quantitative evaluation of their performance with respect to the specifications for biosimilarity and selection following a hierarchical order of decisions using a decision tree. The method resulted in a substantial improvement of the targeted glycosylation profile in only two experimental rounds. Subsequent development stages, namely validation and transfer to industrial-scale facilities require tight control of product quality. Accordingly, further mechanistic understanding of the underlying processes was acquired by non-targeted metabolomic profiling of a CHO cell line expressing a mAb cultured in four distinct process formats. Univariate analysis of intra- and extracellular metabolite and temporal glycosylation profiles provided insights in various pathways. The numerous of parameters were the main driver to carry out principal component analysis, and then, using the methodology of partial-least-square (PLS) projection on latent structures, a multivariate model was built to correlate the extracellular data with the distinct glycosylation profiles. The PLS observation model proved to be reliable and showed its great benefit for glycan pattern control in routine manufacturing, especially at large scale. Rather than relying on post-production interpretation of glycosylation results, glycosylation can be predicted in real-time based on the extracellular metabolite levels in the bioreactor. Finally, for the bioactivity assessment of the glycan differences between the biosimilar and the reference medicinal product (RMP), the health agencies may ask for in the drug registration process, extended ranges of glycan variants need to be generated so that the in vitro assays pick up the changes. The developed glycosylation modulator library enabled the generation of extreme glycosylation variants, including high mannose, afucosylated, galactosylated as well as sialic acid species of both a mAb and an antibody fusion molecule with three N-glycosylation sites. Moreover, to create increased variety, enzymatic glycoengineering was explored for galactosylation and sialylation. The glyco variants induced significant responses in the respective in vitro biological activity assays. The data of this work highlight the immense potential of cell culture medium optimization to adjust product quality. Medium and feed supplementation of a variety of compounds resulted in reproducible and important changes of the product quality profile of both mAbs and a fusion antibody. In addition to the intermediate modulation ranges that largely met the requirements for new-biological-entity and biosimilar development, medium supplementation even enabled quick and straightforward generation of extreme glycan variants suitable for biological activity testing.},
  subject      = {Zellkultur},
  language  = {en}
}
@phdthesis{Ramachandran2015,
  author    = {Ramachandran, Sarada Devi},
  title     = {Development Of Three-Dimensional Liver Models For Drug Development And Therapeutical Applications},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-113155},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2015},
  abstract  = {Primary human liver cells such as hepatocytes when isolated and cultured in 2D monolayers, de-differentiate and lose their phenotypic characteristics. In order to maintain the typical polygonal shape of the hepatocytes and their polarization with respect to the neighbouring cells and extra cellular matrix (ECM), it is essential to culture the cells in a three-dimensional (3D) environment. There are numerous culturing techniques available to retain the 3D organization including culturing hepatocytes between two layers of collagen and/or MatrigelTM (Moghe et al. 1997) or in 3D scaffolds (Burkard et al. 2012). In this thesis, three different 3D hepatic models were investigated. 1. To reflect the in vivo situation, the hepatocytes were cultured in 3D synthetic scaffolds called Mimetix®. These were generated using an electrospinning technique using biodegradable polymers. The scaffolds were modified to increase the pore size to achieve an optimal cell function and penetration into the scaffolds, which is needed for good cell-cell contact and to retain long-term phenotypic functions. Different fibre diameters, and scaffold thicknesses were analyzed using upcyte® hepatocytes. The performance of upcyte® hepatocytes in 3D scaffolds was determined by measuring metabolic functions such as cytochrome P450 3A4 (CYP3A4) and MTS metabolism. 2. Apart from maintaining the hepatocytes in 3D orientation, co-culturing the hepatocytes with other non-parenchymal cell types, such as liver sinusoidal endothelial cells (LSECs) and mesenchymal stem cells (MSCs), better reflects the complexity of the liver. Three different upcyte® cell types namely, hepatocytes, LSECs and MSCs, were used to generated 3D liver organoids. The liver organoids were generated and cultured in static and dynamic conditions. Dynamic conditions using Quasi-vivo® chambers were used to reflect the in vivo blood flow. After culturing the cells for 10 days, the structural orientation of cells within the organoids was analyzed. Functional integrity was investigated by measuring CYP3A4 activities. The organoids were further characterized using in situ hybridization for the expression of functional genes, albumin and enzymes regulating glutamine and glucose levels. 3. An ex vivo bioreactor employing a decellularized organic scaffold called a "Biological Vascularized Scaffold" (BioVaSc) was established. Jejunum of the small intestine from pigs was chemically decellularized by retaining the vascular system. The vascular tree of the BioVaSc was repopulated with upcyte® microvascular endothelial cells (mvECs). The lumen of the BioVaSc was then used to culture the liver organoids generated using upcyte® hepatocytes, LSECs and MSCs. The structural organisation of the cells within the organoids was visualized using cell-specific immunohistochemical stainings. The performance of liver organoids in the BioVaSc was determined according to metabolic functions (CYP3A4 activities). This thesis also addresses how in vitro models can be optimized and then applied to drug development and therapy. A comprehensive evaluation was conducted to investigate the application of second-generation upcyte® hepatocytes from 4 donors for inhibition and induction assays, using a selection of reference inhibitors and inducers, under optimized culture conditions. CYP1A2, CYP2B6, CYP2C9 and CYP3A4 were reproducibly inhibited in a concentration-dependent manner and the calculated IC50 values for each compound correctly classified them as potent inhibitors. Upcyte® hepatocytes were responsive to prototypical CYP1A2, CYP2B6, CYP2C9 and CYP3A4 inducers, confirming that they have functional AhR, CAR and PXR mediated CYP regulation. A panel of 11 inducers classified as potent, moderate or non-inducers of CYP3A4 and CYP2B6 were tested. Three different predictive models for CYP3A4 induction, namely the Relative Induction Score (RIS), AUCu/F2 and Cmax,u/Ind50 were analyzed. In addition, PXR (rifampicin) and CAR-selective (carbamazepine and phenytoin) inducers of CYP3A4 and CYP2B6 induction, respectively, were also demonstrated. Haemophilia A occurs due to lack of functional Factor VIII (FVIII) protein in the blood. Different types of cells from hepatic and extrahepatic origin produce FVIII. Supernatants harvested from primary LSECs were evaluated for the presence of secreted functional FVIII. In order to increase the FVIII production, different upcyte® endothelial cells such as blood outgrowth endothelial cells (BOECs), LSECs and mvECs were transduced with lentiviral particles carrying a FVIII transgene. Also, to reflect a more native situation, primary mvECs were selected and modified by transducing them with FVIII lentivirus and investigated as a potential method for generating this coagulation factor.},
  subject      = {Leberepithelzelle},
  language  = {en}
}
@phdthesis{Bellwon2015,
  author    = {Bellwon, Patricia},
  title     = {Kinetic assessment by in vitro approaches - A contribution to reduce animals in toxicity testing},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-122693},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2015},
  abstract  = {The adoption of directives and regulations by the EU requires the development of alternative testing strategies as opposed to animal testing for risk assessment of xenobiotics. Additionally, high attrition rates of drugs late in the discovery phase demand improvement of current test batteries applied in the preclinical phase within the pharmaceutical area. These issues were taken up by the EU founded 7th Framework Program "Predict-IV"; with the overall goal to improve the predictability of safety of an investigational product, after repeated exposure, by integration of "omics" technologies applied on well established in vitro approaches. Three major target organs for drug-induced toxicity were in focus: liver, kidney and central nervous system. To relate obtained dynamic data with the in vivo situation, kinetics of the test compounds have to be evaluated and extrapolated by physiologically based pharmacokinetic modeling. This thesis assessed in vitro kinetics of the selected test compounds (cyclosporine A, adefovir dipivoxil and cisplatinum) regarding their reliability and relevance to respective in vivo pharmacokinetics. Cells were exposed daily or every other day to the test compounds at two concentration levels (toxic and non-toxic) for up to 14 days. Concentrations of the test compounds or their major biotransformation products were determined by LC-MS/MS or ICP-MS in vehicle, media, cells and plastic adsorption samples generated at five different time-points on the first and the last treatment day. Cyclosporine A bioaccumulation was evident in primary rat hepatocytes (PRH) at the high concentration, while efficient biotransformation mediated by CYP3A4 and CYP3A5 was determined in primary human hepatocytes (PHH) and HepaRG cells. The lower biotransformation in PRH is in accordance with observation made in vivo with the rat being a poor model for CYP3A biotransformation. Further, inter-assay variability was noticed in PHH caused by biological variability in CYP3A4 and CYP3A5 activity in human donors. The inter-assay variability observed for PRH and HepaRG cells was a result of differences between vehicles regarding their cyclosporine A content. Cyclosporine A biotransformation was more prominent in HepaRG cells due to stable and high CYP3A4 and CYP3A5 activity. In addition, in vitro clearances were calculated and scaled to in vivo. All scaled in vitro clearances were overestimated (PRH: 10-fold, PHH: 2-fold, HepaRG cells: 2-fold). These results should be proven by physiologically-based pharmacokinetic modeling and additional experiments, in order to verify that these overestimations are constant for each system and subsequently can be diminished by implementation of further scaling factors. Brain cell cultures, primary neuronal culture of mouse cortex cells and primary aggregating rat brain cells, revealed fast achieved steady state levels of cyclosporine A. This indicates a chemical distribution of cyclosporine A between the aqueous and organic phases and only minor involvement of biological processes such as active transport and biotransformation. Hence, cyclosporine A uptake into cells is presumably transport mediated, supported by findings of transporter experiments performed on a parallel artificial membrane and Caco-2 cells. Plastic adsorption of cyclosporine A was significant, but different for each model, and should be considered by physiologically based pharmacokinetic modeling. Kinetics of adefovir dipivoxil highlights the limits of in vitro approaches. Active transporters are required for adefovir uptake, but were not functional in RPTECT/TERT1. Therefore, adefovir uptake was limited to passive diffusion of adefovir dipivoxil, which itself degrades time-dependently under culture conditions. Cisplatinum kinetics, studied in RPTEC/TERT1 cells, indicated intracellular enrichment of platinum, while significant bioaccumulation was not noted. This could be due to cisplatinum not reaching steady state levels within 14 days repeated exposure. As shown in vivo, active transport occurred from the basolateral to apical side, but with lower velocity. Hence, obtained data need to be modeled to estimate cellular processes, which can be scaled and compared to in vivo. Repeated daily exposure to two different drug concentrations makes it possible to account for bioaccumulation at toxic concentrations or biotransformation/extrusion at non-toxic concentrations. Potential errors leading to misinterpretation of data were reduced by analyses of the vehicles as the applied drug concentrations do not necessarily correspond to the nominal concentrations. Finally, analyses of separate compartments (medium, cells, plastic) give insights into a compound's distribution, reduce misprediction of cellular processes, e.g. biotransformation, and help to interpret kinetic data. On the other hand, the limits of in vitro approaches have also been pointed out. For correct extrapolation to in vivo, it is essential that the studied in vitro system exhibits the functionality of proteins, which play a key role in the specific drug induced toxicity. Considering the benefits and limitations, it is worth to validate this long-term treatment experimental set-up and expand it on co-culture systems and on organs-on-chips with regard to alternative toxicity testing strategies for repeated dose toxicity studies.},
  subject      = {Zellkultur},
  language  = {en}
}
@phdthesis{Abdelmohsen2010,
  author    = {Abdelmohsen, Usama Ramadan},
  title     = {Antimicrobial Activities from Plant Cell Cultures and Marine Sponge-Associated Actinomycetes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-51483},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {This thesis is divided into three parts with the main goal allocating novel antimicrobial compounds that could be used as future antibiotics. The first part aimed to evaluate the potential of plant suspension cultures for the production of antimicrobial proteins. The extracellular, intracellular and cell wall bound fractions of seven heterotrophic and photomixotrophic plant cell suspension cultures treated with nine different elicitors were tested for the elicitor dependent production of antimicrobial proteins. Bioactivities were tested against a selected panel of human isolates including Gram-positive and Gram-negative bacteria as well as fungi using the disc diffusion assay. The intracellular fractions of elicited cell cultures were more active than extracellular fractions while the cell wall bound fractions showed lowest activities. Among the 21 fractions tested, the intracellular fraction of Lavendula angustifolia elicited with DC3000 was most active against Candida maltosa. The second most active fraction was the intracellular fraction of Arabidopsis thaliana elicited with salicylic acid which was moreover active against all test strains. The antimicrobial activity of elicited Arabidopsis thaliana cell cultures was tested by bioautography to locate the antimicrobial proteins in the crude extract. The intracellular fraction of photomixotrophic Arabidopsis thaliana cells elicited with salicylic acid was selected for further gel filtration chromatography on S-200 column leading to the purification of one 19 kDa antimicrobially active protein, designated, AtAMP. Our findings suggest that elicited plant cell cultures may present a new promising alternative source of antimicrobial proteins. The second part comprises the isolation of actinomycetes associated with marine sponges and testing the bioactivities of new species for further investigations. Actinobacterial communities of eleven taxonomically different sponges that had been collected from offshore Ras Mohamed (Egypt) and from Rovinj (Croatia) were investigated by a culture-based approach using different standard media for isolation of actinomycetes and media enriched with aqueous sponge extract to target rare and new actinomycete species. Phylogenetic characterization of 52 representative isolates out of 90 based on almost complete sequences of genes encoding 16S rRNA supported their assignment to 18 different actinomycete genera. Altogether 14 putatively new species were identified based on sequence similarity values below 98.2\% to other strains in the NCBI database. The use of M1 agar amended with aqueous sponge extract yielded a putative new genus related to Rubrobacter which highlighting the need for innovative cultivation protocols. Biological activity testing showed that five isolates were active against Gram-positives only, one isolate was active against Candida albicans only and one isolate showed activity against both groups of pathogens. Moreover, the antiparasistic activity was documented for four isolates. These results showed a high diversity of actinomycetes associated with marine sponges as well as highlighted their potential to produce anti-infective agents. The third part of the thesis focused on the isolation and structure elucidation of new bioactive compounds. Streptomyces strain RV15 recovered from sponge Dysidea tupha, was selected for further chemical analysis by virtue of the fact that it exhibited the greatest antimicrobial potential against Staphylococcus aureus as well as Candida albicans among the all tested strains. Moreover, members of the genus Streptomyces are well known as prolific producers of interesting pharmacologically active metabolites. Chemical analysis of the methanolic crude extract using different chromatographic tools yielded four new compounds. The structures of the new compounds were spectroscopically elucidated to be four new cyclic peptides, namely, cyclodysidins A-D. Their bioactivity was tested against different proteases, bacteria and Candida as well as tumor cell lines. The compounds did not show any significant activities at this point.},
  subject      = {Antimikrobieller Wirkstoff},
  language  = {en}
}
@phdthesis{Li2004,
  author    = {Li, Jie},
  title     = {Differential effects of neuromelanin and synthetic dopamine melanin on cell lines},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-13588},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2004},
  abstract  = {xxx},
  language  = {en}
}
@phdthesis{Gloeckner2001,
  author    = {Gl{\"o}ckner, Herma},
  title     = {Characterization of a new miniaturized hollow-fiber bioreactor for cultivation of cell lines and primary cells to improve cytostatic drug testing in vitro},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-1181317},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2001},
  abstract  = {Monolayer or suspension cell cultures are of only limited value as experimental models for human cancer. Therefore, more sophisticated, three-dimensional culture systems like spheroid cultures or histocultures are used, which more closely mimic the tumor in individual patients compared to monolayer or suspension cultures. As tissue culture or tissue engineering requires more sophisticated culture, specialized in vitro techniques may also improve experimental tumor models. In the present work, a new miniaturized hollow-fiber bioreactor system for mammalian cell culture in small volumes (up to 3 ml) is characterized with regard to transport characteristics and growth of leukemic cell lines (chapter 2). Cell and medium compartment are separated by dialysis membranes and oxygenation is accomplished using oxygenation membranes. Due to a transparent housing, cells can be observed by microscopy during culture. The leukemic cell lines CCRF-CEM, HL-60 and REH were cultivated up to densities of 3.5 x 107/ml without medium change or manipulation of the cells. Growth and viability of the cells in the bioreactor were the same or better, and the viable cell count was always higher compared to culture in Transwell{\^a} plates. As shown using CCRF-CEM cells, growth in the bioreactor was strongly influenced and could be controlled by the medium flow rate. As a consequence, consumption of glucose and generation of lactate varied with the flow rate. Influx of low molecular weight substances in the cell compartment could be regulated by variation of the concentration in the medium compartment. Thus, time dependent concentration profiles (e.g. pharmacokinetic profiles of drugs) can be realized as illustrated using glucose as a model compound. Depending on the molecular size cut-off of the membranes used, added growth factors like GM-CSF and IL-3 as well as factors secreted from the cells are retained in the cell compartment for up to one week. Second, a method for monitoring cell proliferation the hollow-fiber bioreactor by use of the Alamar BlueTM dye was developed (chapter 3). Alamar BlueTM is a non-fluorescent compound which yields a fluorescent product after reduction e.g. by living cells. In contrast to the MTT-assay, the Alamar BlueTM-assay does not lead to cell death. However, when not removed from the cells, the Alamar BlueTM dye shows a reversible, time- and concentration-dependent growth inhibition as observed for leukemic cell lines. When applied in the medium compartment of a hollow-fiber bioreactor system, the dye is delivered to the cells across the hollow-fiber membrane, reduced by the cells and released from the cell into the medium compartment back again. Thus, fluorescence intensity can be measured in medium samples reflecting growth of the cells in the cell compartment. This procedure offers several advantages. First, exposure of the cells to the dye can be reduced compared to conventional culture in plates. Second, handling steps are minimized since no sample of the cells needs to be taken for readout. Moreover, for the exchange of medium, a centrifugation step can be avoided and the cells can be cultivated further. Third, the method allows to discriminate between cell densities of 105, 106 and 107 of proliferating HL-60 cells cultivated in the cell compartment of the bioreactor. Measurement of fluorescence in the medium compartment is more sensitive compared to glucose or lactate measurement for cell counts below 106 cells/ml, in particular. In conclusion, the Alamar BlueTM-assay combined with the hollow-fiber bioreactor offers distinct advantages for the non-invasive monitoring of cell viability and proliferation in a closed system. In chapter 4 the use of the hollow-fiber bioreactor as a tool for toxicity testing was investigated, as current models for toxicity as well as efficacy testing of drugs in vitro allow only limited conclusions with regard to the in vivo situation. Examples of the drawbacks of current test systems are the lack of realistic in vitro tumor models and difficulties to model drug pharmacokinetics. The bioreactor proved to be pyrogen free and is steam-sterilizable. Leukemic cell lines like HL-60 and primary cells such as PHA-stimulated lymphocytes can be grown up to high densities of 1-3 x 107 and analyzed during growth in the bioreactor by light-microscopy. The cytostatic drug Ara-C shows a dose-dependent growth inhibition of HL-60 cells and a dose-response curve similar to controls in culture plates. The bioreactor system is highly flexible since several systems can be run in parallel, soluble drugs can be delivered continuously via a perfusion membrane and gaseous compounds via an oxygenation membrane which also allows to control pO2 and pH (via pCO2) during culture in the cell compartment. The modular concept of the bioreactor system allows realization of a variety of different design properties, which may lead to an improved in vitro system for toxicity testing by more closely resembling the in vivo situation. Whereas several distinct advantages of the new system have been demonstrated, more work has to be done to promote in vitro systems in toxicity testing and drug development further and to reduce the need for animal tests.},
  subject      = {Hohlfaserreaktor},
  language  = {en}
}