@phdthesis{Afify2007, author = {Afify, Samar}, title = {Drug targeting delivery systems for treatment of Raf-1 induced lung tumors in mice}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-22249}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2007}, abstract = {The aim of the present study was to design different dosage forms as carrier systems to deliver sorafenib to the lung of BXB-23 transgenic mice using different routes of administration. Three dosage forms were used one of them was an oil-in-water emulsion and the oral route was chosen for this experiment. The other delivery system was a liposome preparation for intratracheal instillation. In this case the oral route was considered as a control experiment. The last dosage form was PLGA microspheres. Before sorafenib administration it was important to develop a HPLC method to assess sorafenib absorption after its administration and to determine its concentrations in mouse serum. The HPLC method allowed sorafenib quantification in small volumes (30 µl) of mouse serum and tissues. The developed HPLC method was validated resulting in satisfactory selectivity, good linearity, good accuracy and precision over the concentration range examined. Sorafenib was successfully incorporated in a fat emulsion (o/w) using a traditional method resulting in a white homogenous emulsion and no particle aggregation was observed. Sorafenib exhibited antitumor activity on the lung adenoma in BXB-23 transgenic mice when administered orally (2 mg sorafenib per mouse) in the emulsion preparation. The determined effect was an approximately 29 \% reduction in the tumor area of the adenoma foci and a proliferation reduction. In order to improve the pharmacological effects of sorafenib on the lung adenoma in BXB-23 mice, the targeting of sorafenib directly to the site of action (the lung) was an attractive concept. For this purpose the intratracheal route was used. Since sorafenib administration by instillation required incorporation of sorafenib in a dosage form suitable for its lipophilic nature, a liposome suspension was the second dosage form used. A lyophilization method was employed for sorafenib liposome preparation utilizing dilauroylphosphatidylcholine (DLPC) which is safe and tolerable for the lung. Incorporation of sorafenib in the liposomes did not influence the particle size and its distribution. The sorafenib liposomes showed high encapsulation efficiency, good stability at 4 °C for one month and satisfactory in vitro release properties and inhibited Raf-1 mediated activation of ERK in cell culture assay. In a pharmacokinetic experiment sorafenib loaded liposomes were instilled directly into the lung. The results revealed that a significant level of sorafenib was achieved in the lung tissues after 2 hours and then reduced after 48 h and remained nearly constant for one week. On the other hand, only traces of sorafenib were found in the mice serum up to 48 h. Subsequently, the pharmacological activity of sorafenib (1 mg per mouse) was studied when delivered in a liposomal suspension intratracheally to treat the lung adenoma of BXB-23 mice. The data of this experiment demonstrated that sorafenib intratracheal instillation resulted in a reduction of tumor area of adenoma foci (67 \%) and an elevation of the percent of apoptotic cells. In contrast, prolongation of the treatment period did not further enhance sorafenib activity on the lung adenoma. This previous finding suggested a development of multidrug resistance (MDR) by the adenoma foci cells against sorafenib instillation, which was examined by immunohistochemistry staining. The percent of MDR positive cells was higher after two and three weeks sorafenib liposome instillation treatment than that after one week treatment. The last dosage form used for sorafenib was microspheres, which were prepared by emulsion-diffusion-evaporation method using biodegradable PLGA 50:50 resulting in a white lyophilized powder. The system was characterized physicochemically and revealed a good microspheres yield, high encapsulation efficiency, a homogenous particle size distribution and slow in vitro release of sorafenib. The other strategy studied in the present research project was gene delivery to target the lung bearing tumor of BXB-23 mice using a non-viral vector (polyethylenimine). Polyethylenimine (PEI) was used to investigate its efficiency in transfecting lung bearing tumor of BXB-23 mice model and its ability to transfect the adenoma foci cells. LacZ, which encodes Beta-galactosidase was used in the present study as a reporter gene and was complexed with PEI before delivered intravenously. A high LacZ expression in the alveolar region with some expression in the adenoma foci was observed. On contrary, a low LacZ expression in the alveoli and in the adenoma foci was achieved after instillation of the same polyplex intratracheally.}, subject = {Maus}, language = {en} } @phdthesis{KraehenbuehlAmstalden2018, author = {Kr{\"a}henb{\"u}hl Amstalden, Maria Cecilia}, title = {Development of a bacterial responsive antibiotic release system}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-163386}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {A major problem regarding public health is the emergence of antibiotic resistant bacterial strains, especially methicillin resistant Staphylococcus aureus (MRSA). This is mainly attributed to the unnecessary overuse of antimicrobial drugs by patients; however, one aspect that is often neglected is their untargeted mechanism of action, affecting not only the infection itself but also commensal bacteria which are often opportunistic pathogens causing many diseases as well. Therefore, our goal was to develop a bioresponsive antibiotic delivery system triggered by virulence factors. The designed system is comprised of a polymer to enhance its pharmacokinetic profile, a peptide cleavable linker, and the antibiotic agent itself. The bacterial protease aureolysin which is expressed by S. aureus during infections would cleave the linker and partially release the antibiotic which would be still attached to a remaining tetrapeptide. These would be cleaved by a group of proteases naturally present in plasma called aminopeptidases, finally releasing the compound. In the first part of this project, we searched for a suitable sequence to serve as a cleavable linker. It should be sensitive towards the target bacterial protease but not be cleaved by any human enzymes to guarantee the specificity of the system. Therefore, we synthesized three peptide sequences via Solid Phase Peptide Synthesis and incubated them with aureolysin as well as with many human matrix Metalloproteases. The analysis and quantification of enzymatic activity was monitored chromatographically (RP-HPLC). The plasminogen originated sequence was chosen since it was not sensitive towards MMPs, but cleaved by aureolysin. In the second part, we tried to incorporate the chosen peptide sequences as crosslinkers in hydrogel formulations. The purpose was to physically incorporate the antibiotic within the hydrogel, which would be released by the cleavage of those sequences and the consequent loosening the hydrogel net. For that purpose we used a commercially available hydrogel kit with a PVA matrix modified with maleimide, which allows a conjugation reaction with thiol functionalized crosslinkers. Three fluorophores were chosen to serve as antibiotic models and a diffusion assay was performed. Only the glomerular structured Green Fluorescent Protein (GFP) presented a low diffusion rate, thus the aureolysin release assays were performed only using this prototype. Assays showed that with a low hydrogel polymer concentration, the fluorophore either quickly diffused into the medium or was not released at all. The physical incorporation of the antibiotic within the hydrogel pores was therefore abolished as a suitable release approach. For a second attempt, we covalently bound a fluorophore to the linker, which was conjugated to the hydrogel matrix. The incubation with aureolysin and subsequent RP-HPLC analysis showed a peak with the same retention time correspondent to the fragment product after cleavage of the free linker. This is a proof that the concept of linking the peptide sequence to the antibiotic is a promising strategy for its bioresponsive release. Within the third part of this study, we analyzed the degradation of the resulted fragment after aureolysin activity and subsequent full release of the antibiotic by human aminopeptidases. We determined the concentration of those enzymes in human plasma and synthesized the fragment by conjugating the tetrapeptide sequence to aminofluorescein via EDC/NHS reaction. By incubating the construct with the lowest aminopeptidase concentration measured in plasma, the fluorophore was completely released within two hours, showing the efficacy of these enzymes as bioresponsive agents. The last part was the construction of the PEGylated linker-antibiotic. For this purpose we chose the tetracycline like antibiotic chelocardin (CHD) as our prototype. The conjugation of the linker- CHD to the polymer was performed by copper free click chemistry. The cleavage rate of the linker by aureolysin was very similar to the one obtained for the free peptide, indicating that the PEGylation does not interfere on the enzymatic activity. However, by trying to increase the loading ratio of chelocardin onto the polymer, we observed a very low cleavage rate for the system, indicating the formation of aggregates by those constructs. The designed system has proved to be a smart strategy for the delivery on demand of antibiotics in which the drug is only released by the presence of S. aureus during their virulent state.}, subject = {Arzneimittelforschung}, language = {en} } @phdthesis{Spieler2021, author = {Spieler, Valerie}, title = {Bioinspired drug delivery of interleukin-4}, doi = {10.25972/OPUS-19359}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-193590}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Chronic inflammatory diseases such as rheumatoid arthritis, type 2 diabetes and cardiovascular diseases, are associated with the homeostatic imbalance of one of several physiological systems combined with the lack of spontaneous remission, which causes the disease to persevere throughout patients' lives. The inflammatory response relies mainly on tissue-resident, pro-inflammatory M1 type macrophages and, consequently, a chance for therapeutic intervention lies in driving macrophage polarization towards the anti-inflammatory M2 phenotype. Therefore, anti-inflammatory cytokines that promote M2 polarization, including interleukin-4 (IL4), have promising therapeutic potential. Unfortunately, their systemic use is hampered by a short serum half-life and dose-limiting toxicity. On the way towards cytokine therapies with superior safety and efficacy, this thesis is focused on designing bioresponsive delivery systems for the anti-inflammatory cytokine IL4. Chapter 1 describes how anti-inflammatory cytokines are tightly regulated in chronic, systemic inflammation as in rheumatoid arthritis but also in acute, local inflammation as in myocardial infarction. Both diseases show a characteristic progression during which anti-inflammatory cytokine delivery is of variable benefit. A conventional, passive drug delivery system is unlikely to release the cytokines such that the delivery matches the dynamic course of the (patho-)physiological progress. This chapter presents a blueprint for active drug delivery systems equipped with a 24/7 inflammation detector that continuously senses for matrix metalloproteinases (MMP) as surrogate markers of the disease progress and responds by releasing cytokines into the affected tissues at the right time and place. Because they are silent during phases of low disease activity, bioresponsive depots could be used to treat patients in asymptomatic states, as a preventive measure. The drug delivery system only gets activated during flares of inflammation, which are then immediately suppressed by the released cytokine drug and could prevent the steady damage of subclinical chronic inflammation, and therefore reduce hospitalization rates. In a first proof of concept study on controlled cytokine delivery (chapter 2), we developed IL4-decorated particles aiming at sustained and localized cytokine activity. Genetic code expansion was deployed to generate muteins with the IL4's lysine 42 replaced by two different unnatural amino acids bearing a side chain suitable for click chemistry modification. The new IL4 muteins were thoroughly characterized to ensure proper folding and full bioactivity. Both muteins showed cell-stimulating ability and binding affinity to IL4 receptor alpha similar to those of wild type IL4. Copper-catalyzed (CuAAC) and strain-promoted (SPAAC) azide-alkyne cycloadditions were used to site-selectively anchor IL4 to agarose particles. These particles had sustained IL4 activity, as demonstrated by the induction of TF-1 cell proliferation and anti-inflammatory M2 polarization of M-CSF-generated human macrophages. This approach of site-directed IL4 anchoring on particles demonstrates that cytokine-functionalized particles can provide sustained and spatially controlled immune-modulating stimuli. The idea of a 24/7 sensing, MMP driven cytokine delivery system, as described in the introductory chapter, was applied in chapter 3. There, we simulated the natural process of cytokine storage in the extracellular matrix (ECM) by using an injectable solution of IL4 for depot formation by enzyme-catalyzed covalent attachment to ECM components such as fibronectin. The immobilized construct is meant to be cleaved from the ECM by matrix-metalloproteinases (MMPs) which are upregulated during flares of inflammation. These two functionalities are facilitated by a peptide containing two sequences: a protease-sensitive peptide linker (PSL) for MMP cleavage and a sequence for covalent attachment by activated human transglutaminase FXIIIa (TGase) included in the injection mix for co-administration. This peptide was site-selectively conjugated to the unnatural amino acid at IL4 position 42 allowing to preserve wild type bioactivity of IL4. In vitro experiments confirmed the anticipated MMP response towards the PSL and TGase-mediated construct attachment to fibronectin of the ECM. Furthermore, the IL4-peptide conjugates were able to reduce inflammation and protect non-load bearing cartilage along with the anterior cruciate ligament from degradation in an osteoarthritis model in rabbits. This represents the first step towards a minimally invasive treatment option using bioresponsive cytokine depots with potential clinical value for inflammatory conditions. One of the challenges with this approach was the production of the cytokine conjugate, with incorporation of the unnatural amino acid into IL4 being the main bottleneck. Therefore, in chapter 4, we designed a simplified version of this depot system by genetically fusing the bifunctional peptide via a flexible peptide spacer to murine IL4. While human IL4 loses its activity upon C-terminal elongation, murine IL4 is not affected by this modification. The produced murine IL4 fusion protein could be effectively bound to in vitro grown extracellular matrix in presence of TGase. Moreover, the protease-sensitive linker was selectively recognized and cleaved by MMPs, liberating intact and active IL4, although at a slower rate than expected. Murine IL4 offers the advantage to evaluate the bioresponsive cytokine depot in many available mouse models, which was so far not possible with human IL4 due to species selectivity. For murine IL4, the approach was further extended to systemic delivery in chapter 5. To increase the half-life and specifically target disease sites, we engineered a murine IL4 variant conjugated with a folate-bearing PEG chain for targeting of activated macrophages. The bioactive IL4 conjugate had a high serum stability and the PEGylation increased the half-life to 4 h in vivo. Surprisingly, the folate moiety did not improve targeting in an antigen-induced arthritis (AIA) mouse model. IL4-PEG performed better in targeting the inflamed joint, while IL4-PEG-folate showed stronger accumulation in the liver. Fortunately, the modular nature of the IL4 conjugate facilitates convenient adaption of PEG chain length and the targeting moiety to further improve the half-life and localization of the cytokine. In summary, this thesis describes a platform technology for the controlled release of cytokines in response to inflammation. By restricting the release of the therapeutic to the site of inflammation, the benefit-risk ratio of this potent class of biologics can be positively influenced. Future research will help to deepen our understanding of how to perfectly combine cytokine, protease-sensitive linker and immobilization tag or targeting moiety to tackle different diseases.}, subject = {Targeted drug delivery}, language = {en} } @phdthesis{Steiger2017, author = {Steiger, Christoph}, title = {Drug delivery of therapeutic gases - strategies for controlled and local delivery of carbon monoxide}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141054}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {The isoenzyme heme oxygenase 1 (HO-1) is a key element for maintaining cellular homeostasis. Upregulated in response to cellular stress, the HO-1 degrades heme into carbon monoxide (CO), biliverdin, and Fe2+. By means of a local cell-protective feedback loop the enzyme triggers numerous effects including anti-oxidative, anti-apoptotic, and anti-inflammatory events associated with complex signalling patterns which are largely orchestrated by CO. Various approaches to mimic this physiological HO-1 / CO system aiming for a treatment of medical conditions have been described [1]. These preclinical studies commonly applied CO systemically via (i) inhalation or (ii) using CO-Releasing Molecules (CORMs) [2]. The clinical use of these approaches, however, is challenged by a lack of practicability and substantial safety issues associated with the toxicity of high systemic doses of CO that are required for triggering therapeutic effects. Therefore, one rational of this thesis is to describe and evaluate strategies for the local delivery of CO aiming for safe and effective CO therapeutics of tomorrow.}, subject = {Targeted drug delivery}, language = {en} }