@article{SoaviScotognellaViolaetal.2015, author = {Soavi, Giancarlo and Scotognella, Francesco and Viola, Daniele and Hefner, Timo and Hertel, Tobias and Cerullo, Giulio and Lanzani, Guglielmo}, title = {High energetic excitons in carbon nanotubes directly probe charge-carriers}, series = {Scientific Reports}, volume = {5}, journal = {Scientific Reports}, number = {9681}, doi = {10.1038/srep09681}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-143061}, year = {2015}, abstract = {Theory predicts peculiar features for excited-state dynamics in one dimension (1D) that are difficult to be observed experimentally. Single-walled carbon nanotubes (SWNTs) are an excellent approximation to 1D quantum confinement, due to their very high aspect ratio and low density of defects. Here we use ultrafast optical spectroscopy to probe photogenerated charge-carriers in (6,5) semiconducting SWNTs. We identify the transient energy shift of the highly polarizable S\(_{33}\) transition as a sensitive fingerprint of charge-carriers in SWNTs. By measuring the coherent phonon amplitude profile we obtain a precise estimate of the Stark-shift and discuss the binding energy of the S\(_{33}\) excitonic transition. From this, we infer that charge-carriers are formed instantaneously (<50 fs) even upon pumping the first exciton, S\(_{11}\). The decay of the photogenerated charge-carrier population is well described by a model for geminate recombination in 1D.}, language = {en} } @phdthesis{Schwarz2015, author = {Schwarz, Christoph Benjamin}, title = {Full vector-field control of femtosecond laser pulses with an improved optical design}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142948}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The controlled shaping of ultrashort laser pulses is a powerful technology and applied in many laser laboratories today. Most of the used pulse shapers are only able to produce linearly polarized pulses shaped in amplitude and phase. Some devices are also capable of producing limited time-varying polarization profiles, but they are not able to control the amplitude. However, for some state-of-the-art non-linear time-resolved methods, such as polarization-enhanced two-dimensional spectroscopy, the possibility of controlling the amplitude and the polarization simultaneously is desirable. Over the last years, different concepts have been developed to overcome these restrictions and to manipulate the complete vector-field of an ultrashort laser pulse with independent control over all four degrees of freedom - phase, amplitude, orientation, and ellipticity. The aim of this work was to build such a vector-field shaper. While the basic concept used for our setup is based on previous designs reported in the literature, the goal was to develop an optimized optical design that minimizes artifacts, allowing for the generation of predefined polarization pulse sequences with the highest achievable accuracy. In Chapter 3, different approaches reported in the literature for extended and unrestricted vector-field control were examined and compared in detail. Based on this analysis, we decided to follow the approach of modulating the spectral phase and amplitude of two perpendicularly polarized pulses independently from each other in two arms of an interferometer and recombining them to a single laser pulse to gain control over the complete vector field. As described in Chapter 4, the setup consists of three functional groups: i) an optical component to generate and recombine the two polarized beams, ii) a 4f setup, and iii) a refracting telescope to direct the two beams under two different angles of incidence onto the grating of the 4f setup in a common-path geometry. This geometry was chosen to overcome potential phase instabilities of an interferometric vector-field shaper. Manipulating the two perpendicularly polarized pulses simultaneously within one 4f setup and using adjacent pixel groups of the same liquid-crystal spatial light modulator (LC SLM) for the two polarizations has the advantages that only a single dual-layer LC SLM is required and that a robust and compact setup was achieved. The shaping capabilities of the presented design were optimized by finding the best parameters for the setup through numerical calculations to adjust the frequency distributions for a broad spectrum of 740 - 880 nm. Instead of using a Wollaston prism as in previous designs, a thin-film polarizer (TFP) is utilized to generate and recombine the two orthogonally polarized beams. Artifacts such as angular dispersion and phase distortions along the beam profile which arise when a Wollaston prism is used were discussed. Furthermore, it was shown by ray-tracing simulations that in combination with a telescope and the 4f setup, a significant deformation of the beam profile would be present when using a Wollaston prism since a separation of the incoming and outgoing beam in height is needed. The ray-tracing simulations also showed that most optical aberrations of the setup are canceled out when the incoming and outgoing beams propagate in the exact same plane by inverting the beam paths. This was realized by employing a TFP in the so-called crossed-polarizer arrangement which has also the advantage that the polarization-dependent efficiencies of the TFP and the other optics are automatically compensated and that a high extinction ratio in the order of 15000:1 is reached. Chromatic aberrations are, however, not compensated by the crossed-polarizer arrangement. The ray-tracing simulations confirmed that these chromatic aberrations are mainly caused by the telescope and not by the cylindrical lens of the 4f setup. Nevertheless, in the experimentally used wavelength range of 780 - 816 nm, only minor distortions of the beam profile were observed, which were thus considered to be negligible in the presented setup. The software implementation of the pulse shaper was reviewed in Chapter 5 of this thesis. In order to perform various experiments, five different parameterizations, accounting for the extended shaping capabilities of a vector-field shaper, were developed. The Pixel Basis, the Spectral Basis, and the Spectral Taylor Basis can generally be used in combination with an optimization algorithm and are therefore well suited for quantum control experiments. For multidimensional spectroscopy, the Polarized Four-Pulse Basis was established. With this parameterization pulse sequences with up to four subpulses can be created. The polarization state of each subpulse can be specified and the relative intensity, phase, and temporal delay between consecutive subpulses can be controlled. In addition, different software programs were introduced in Chapter 5 which are required to perform the experiments conducted in this work. The experimental results were presented in Chapter 6. The frequency distribution across the LC SLM was measured proving that the optimal frequency distribution was realized experimentally. Furthermore, the excellent performance of the TFP was verified. In general, satellite pulses are emitted from the TFP due to multiple internal reflections. Various measurements demonstrated that these pulses are temporally separated by at least 4.05 ps from the main pulse and that they have vanishing intensity. The phase stability between the two arms of the presented common-path setup σ = 28.3 mrad (λ/222) over 60 minutes. To further improve this stability over very long measurement times, an on-the-fly phase reduction and stabilization (OPRAS) routine utilizing the pulse shaper itself was developed. This routine automatically produces a compressed pulse with a minimized relative phase between the two polarization components. A phase stability of σ = 31.9 mrad (λ/197) over nearly 24 hours was measured by employing OPRAS. Various pulse sequences exceeding the capabilities of conventional pulse shapers were generated and characterized. The experimental results proved that shaped pulses with arbitrary phase, amplitude, and polarization states can be created. In all cases very high agreement between the target parameters and the experimental data was achieved. For the future use of the setup also possible modifications were suggested. These are not strictly required, but all of them could further improve the performance and flexibility of the setup. Firstly, it was illustrated how a "dual-output" of the setup can be realized. With this modification it would be possible to use the main intensity of the shaped pulse for an experiment while using a small fraction to characterize the pulse or to perform OPRAS simultaneously. Secondly, the basic idea of replacing the telescope by focusing mirrors in order to eliminate the chromatic aberrations was presented. Regarding the different parameterizations for vector-field shaping, some modifications increasing the flexibility of the implemented bases and the realization of a von Neumann Basis for the presented setup were proposed. In future experiments, the vector-field shaper will be used in conjunction with a photoemission electron microscope (PEEM). This approach combines the temporal resolution provided by ultrashort laser pulses with the high spatial resolution gained by electron microscopy in order to perform two-dimensional spectroscopy and coherent control on nanostructures with polarization-shaped femtosecond laser pulses. In combination with other chiral-sensitive experimental setups implemented earlier in our group, the vector-field shaper opens up new perspectives for chiral femtochemistry and chiral control. The designed vector-field shaper meets all requirements to generate high-precision polarization-shaped multipulse sequences. These can be used to perform numerous polarization-sensitive experiments. Employing the OPRAS routine, a quasi-infinitely long phase stability is achieved and complex and elaborated long-term measurements can be carried out. The fact that OPRAS demands no additional hardware and that only a single dual-layer LC SLM and inexpensive optics are required allows the building of a vector-field shaper at comparatively low costs. We hope that with the detailed insights into the optical design process as well as into the software implementation given in this thesis, vector-field shaping will become a standard technique just as conventional pulse shaping in the upcoming years.}, subject = {Ultrakurzer Lichtimpuls}, language = {en} } @phdthesis{Siebert2002, author = {Siebert, Torsten Uwe}, title = {Four-Wave Mixing Techniques Applied to the Investigation of Non-Adiabatic Dynamics in Polyatomic Molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2456}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2002}, abstract = {In the experiments presented in this work, third-order, time-resolved spectroscopy was applied to the disentanglement of nuclear and electronic degrees of freedom in polyatomic molecules. The motivation for approaching this problem was given by the decisive role that the coupling of nuclear and electronic dynamics plays in the mechanism of photochemical reactions and photobiological processes. In order to approach this complex problem, different strategies within the framework of time-resolved, four-wave mixing spectroscopy were developed that allowed for the dynamic as well as the energetic aspects of vibronic coupling in non-radiative transitions of polyatomic molecules to be addressed. This was achieved by utilizing the influence of optical as well as Raman resonances on four-wave mixing processes. These resonance effects on third-order, optical processes allow for a high selectivity to be attained with respect to the interrogation of specific aspects of molecular dynamics. The development of different strategies within the framework of time-resolved, four-wave mixing spectroscopy for addressing the problem of vibronic coupling began with the experiments on gaseous iodine. This simple, well investigated molecular system was chosen in order to unambiguously characterize the effect of Raman resonances on four-wave mixing processes. A time-resolved degenerative four-wave mixing (DFWM) experiment was carried out on gaseous iodine that allowed for the dynamics of coherent Stokes Raman scattering (CSRS) as well as a coherent anti-Stokes Raman scattering (CARS) to be observed parallel to the dynamics of a DFWM process at different spectral positions of the FWM signal. Here, the state-selectivity of these different FWM processes manifests itself in the vibrational wave packet dynamics on different electronic potentials of iodine. It could be shown that Raman resonances determine the selectivity with which these FWM processes prepare and interrogate nuclear dynamics in different electronic states. With the insight gained into the relevance of Raman resonant processes in FWM spectroscopy, an experimental scheme was devised that utilizes this effect to selectively interrogate the dynamics of a specific vibrational mode within a polyatomic molecule during a radiationless electronic transition. Here, a CARS process was employed to selectively probe specific vibrational modes of a molecular system by variably tuning the energy difference between the lasers involved in the CARS process to be in Raman resonance with the vibrational energy spacing of a particular vibrational mode. Using this aspect of a tunable resonance enhancement within a CARS scheme, this optical process was incorporated in a time-resolved pump-probe experiment as a mode-selective probe mechanism. This type of experimental configuration, that employs four pulsed laser fields, was classified as a pump-CARS scheme. Here, a laser pulse independent of the CARS process initiates the molecular dynamics that are interrogated selectively with respect to the vibrational mode of the system through the simultaneous interaction of the three pulsed fields involved in the CARS process. Time-resolution on a femtosecond timescale is achieved by introducing a time delay between the independent pump laser and the laser pulses of the CARS process. The experimental configuration of a pump-CARS scheme was applied to the study of the nuclear dynamics involved in the radiationless electronic transition between the first excited singlet state (S1) and the electronic ground state (S0) of all-trans-b-carotene. The mode-selective CARS probe allowed for the characteristic timescale with which specific vibrational modes are repopulated in the S0 state to be determined. From the varying repopulation times of specific vibrational modes, a mechanism with which the full set of vibrational states of the S0 potential are repopulated subsequent to the internal conversion process could be postulated. Most importantly, the form of nuclear motion that primarily funnels the population between the two electronic states could be identified as the C=C symmetric symmetric stretch mode in the polyene backbone of b-carotene. With this, the reaction coordinate of this radiationless electronic transition could be identified. The experiment shows, that the CARS probe is capable of determining the nuclear motion coupled to a radiationless electronic transition in complex polyatomic systems. The S1/S0 internal conversion process in b-carotene was further investigated with time-resolved transient gratings. Here, the energetic aspects of a non-adiabatic transition was addressed by determining the influence of the vibrational energy on the rate of this internal conversion. In order to compare the rate of internal conversion taking place out of vibrational ground state modes versus this transition initiating out of vibrationally hot modes, the strategy of shifting the probe mechanism in the transient grating scheme to spectral positions within and out of the red flank of the S1 absorption profile was pursued. The interrogation of different vibrational states was verified by determining the degree of vibrational cooling, taking place parallel to the internal conversion process. With this strategy, it could be shown that vibrationally hot states contribute to the internal conversion with a higher rate than vibrational ground state modes. In summary, different third-order, optical processes in the framework of time-resolved FWM were applied to the study of non-adiabatic dynamics in polyatomic molecules. By utilizing the effect of optical as well as Raman resonances on different FWM processes, it could be shown that third-order, time-resolved spectroscopy is a powerful tool for gaining insight into complex molecular dynamics such as vibronic coupling. The experiments presented in this work showed that the CARS process, as a mode-selective probe in time-resolved experiments, is capable of disentangling nuclear and electronic dynamics.}, subject = {Provitamin A}, language = {en} } @article{MalyBrixner2021, author = {Mal{\´y}, Pavel and Brixner, Tobias}, title = {Fluorescence-Detected Pump-Probe Spectroscopy}, series = {Angewandte Chemie International Edition}, volume = {60}, journal = {Angewandte Chemie International Edition}, number = {34}, doi = {10.1002/anie.202102901}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-244811}, pages = {18867 -- 18875}, year = {2021}, abstract = {We introduce a new approach to transient spectroscopy, fluorescence-detected pump-probe (F-PP) spectroscopy, that overcomes several limitations of traditional PP. F-PP suppresses excited-state absorption, provides background-free detection, removes artifacts resulting from pump-pulse scattering, from non-resonant solvent response, or from coherent pulse overlap, and allows unique extraction of excited-state dynamics under certain conditions. Despite incoherent detection, time resolution of F-PP is given by the duration of the laser pulses, independent of the fluorescence lifetime. We describe the working principle of F-PP and provide its theoretical description. Then we illustrate specific features of F-PP by direct comparison with PP, theoretically and experimentally. For this purpose, we investigate, with both techniques, a molecular squaraine heterodimer, core-shell CdSe/ZnS quantum dots, and fluorescent protein mCherry. F-PP is broadly applicable to chemical systems in various environments and in different spectral regimes.}, language = {en} } @unpublished{MuellerDraegerMaetal.2018, author = {M{\"u}ller, Stefan and Draeger, Simon and Ma, Kiaonan and Hensen, Matthias and Kenneweg, Tristan and Pfeiffer, Walter and Brixner, Tobias}, title = {Fluorescence-Detected Two-Quantum and One-Quantum-Two-Quantum 2D Electronic Spectroscopy}, series = {Journal of Physical Chemistry Letters}, journal = {Journal of Physical Chemistry Letters}, doi = {10.1021/acs.jpclett.8b00541}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-173468}, year = {2018}, abstract = {We demonstrate two-quantum (2Q) coherent two-dimensional (2D)electronic spectroscopy using a shot-to-shot-modulated pulse shaper and fluorescence detection. Broadband collinear excitation is realized with the supercontinuum output of an argon-filled hollow-core fiber, enabling us to excite multiple transitions simultaneously in the visible range. The 2Q contribution is extracted via a three-pulse sequence with 16-fold phase cycling and simulated employing cresyl violet as a model system. Furthermore, we report the first experimental realization of one-quantum-two-quantum (1Q-2Q) 2D spectroscopy, offering less congested spectra as compared with the 2Q implementation. We avoid scattering artifacts and nonresonant solvent contributions by using fluorescence as the observable. This allows us to extract quantitative information about doubly excited states that agree with literature expectations. The high sensitivity and background-free nature of fluorescence detection allow for a general applicability of this method to many other systems.}, subject = {Fluoreszenz}, language = {en} } @article{LisinetskayaRoehrMitrić2016, author = {Lisinetskaya, Polina and R{\"o}hr, Merle I. S. and Mitrić, Roland}, title = {First-principles simulation of light propagation and exciton dynamics in metal cluster nanostructures}, series = {Applied Physics B}, volume = {122}, journal = {Applied Physics B}, number = {6}, issn = {0946-2171}, doi = {10.1007/s00340-016-6436-6}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159193}, pages = {175}, year = {2016}, abstract = {We present a theoretical approach for the simulation of the electric field and exciton propagation in ordered arrays constructed of molecular-sized noble metal clusters bound to organic polymer templates. In order to describe the electronic coupling between individual constituents of the nanostructure we use the ab initio parameterized transition charge method which is more accurate than the usual dipole-dipole coupling. The electronic population dynamics in the nanostructure under an external laser pulse excitation is simulated by numerical integration of the time-dependent Schrodinger equation employing the fully coupled Hamiltonian. The solution of the TDSE gives rise to time-dependent partial point charges for each subunit of the nanostructure, and the spatio-temporal electric field distribution is evaluated by means of classical electrodynamics methods. The time-dependent partial charges are determined based on the stationary partial and transition charges obtained in the framework of the TDDFT. In order to treat large plasmonic nanostructures constructed of many constituents, the approximate self-consistent iterative approach presented in (Lisinetskaya and Mitric in Phys Rev B 89:035433, 2014) is modified to include the transition-charge-based interaction. The developed methods are used to study the optical response and exciton dynamics of Ag-3(+) and porphyrin-Ag-4 dimers. Subsequently, the spatio-temporal electric field distribution in a ring constructed of ten porphyrin-Ag-4 subunits under the action of circularly polarized laser pulse is simulated. The presented methodology provides a theoretical basis for the investigation of coupled light-exciton propagation in nanoarchitectures built from molecular size metal nanoclusters in which quantum confinement effects are important.}, language = {en} } @phdthesis{Kanal2015, author = {Kanal, Florian}, title = {Femtosecond Transient Absorption Spectroscopy - Technical Improvements and Applications to Ultrafast Molecular Phenomena}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-118771}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Photoinduced processes are nowadays studied with a huge variety of spectroscopic methods. In the liquid phase, transient absorption spectroscopy is probably the most versatile pump-probe technique used to study light-induced molecular phenomena. Optical time-resolved spectroscopy is established in a large number of laboratories and is still further being developed with respect to many technical aspects. Nevertheless, the full potential of shortening the data-acquisition time—necessary for the investigation of rapidly photodegrading samples and observation of macroscopically fast processes—achievable with high-repetition-rate laser systems and shot-to-shot detection was not fully exploited. Especially, shot-to-shot detection is highly beneficial due to the high correlation of subsequent laser pulses. The development and implementation of 100 kHz broadband shot-to-shot data acquisition was presented in Chapter 3. For an established laser dye as a benchmark system, ultrafast excited-state dynamics were measured for the first time with broadband shot-to-shot detection at 100 kHz. An analysis of both the noise characteristics of the employed laser and the correlation of subsequent pulses quantified the advantage of shot-to-shot data acquisition. In the utilized software environment, the time for measuring a complete data set could be sped up by a factor of three or even higher compared to a laser system working at 1 kHz. So far, the limiting factor is the data processing and the movement of the mechanical delay stage. Nevertheless, the new shot-to-shot detection has the potential to shorten the measurement time up to a factor of 100. The data quality is improved by a factor of three when the hitherto conventional averaging scheme is compared to shot-to-shot acquisition for the same number of laser pulses. The expansion of shot-to-shot data acquisition for high repetition rates will allow studies on sensitive samples as exposure times can strongly be reduced to achieve the same signal-to-noise ratio. In addition, multidimensional spectroscopy can also be extended to high-repetition shot-to-shot readout allowing an efficient recording of data. Therefore, in future experiments, dynamics and couplings in sensitive samples and kinetic processes could be studied in more detail. Complex photophysical and photochemical phenomena are subject of many fields of research. Many of these multifaceted processes are not yet fully understood. Therefore, a possible approach is the elucidation of single reaction steps with the combination of transient absorption spectroscopy and a suitable, less complex model system. The systematic variation of the model system's properties and environments, e.g., by chemical substitution or adequate choice of the solvent allows the determination of essential entities and reactivities thereof. Proper knowledge of an individual intermediate step and its determining factors can enhance the understanding of the complete photoreaction process. The application of transient absorption spectroscopy was shown for the optically-induced electron transfer in a series of donor-acceptor oligomers in Chapter 4. In general, the solvent relaxation times were isolated from the back-electron-transfer dynamics by a global lifetime analysis. For the smallest oligomeric structure where complete charge separation is possible, an ultrafast equilibration leads to charge recombination from the configuration showing the lowest barrier for recombination. The back-electron transfer strongly depends on the utilized solvent. Whereas in dichloromethane the back-electron transfer occurs with the maximum rate in the barrierless optimal region, the dynamics in toluene are governed by a Marcus inverted-region effect. The experimentally observed rates were also estimated by theoretical calculations of the respective barriers. The study did not only successfully unravel charge transfer in the oligomeric systems but also improved the understanding of the electron-transfer properties of larger polymers from an earlier study. Therefore, the combination of length variation and time-resolved spectroscopy is an important step towards the correct prediction of charge-carrier dynamics in macroscopic devices, e.g., for photovoltaics. The bond dissociation of a carbon-monoxide-releasing molecule in aqueous solution was studied in Chapter 5 as a prototype reaction for the photo-triggered breaking of a bond. It was shown that upon excitation only one carbon-monoxide ligand of the tricarbonyl complex is dissociated. A fraction of the photolyzed molecules restore the intact initial complex by geminate recombination within the temporal resolution of the experiment. However, the recombination could be detected by the hot ground-state infrared absorption of the complex. The detectable dicarbonyl formed upon CO release distributes excess energy from the absorbed photon into low-frequency modes which result in broadened absorption bands like for the recombined tricarbonyl. The free coordination site in the ligand sphere is filled with a solvent water molecule. Despite numerous studies of metal carbonyls studied in alkaneous solutions, the elucidation of the dynamics of a CORM in aqueous solution added another important detail to the photochemistry of this class of compounds. Experiments employing a second ultraviolet pump pulse did not trigger further CO dissociation and hence no formation of a monocarbonyl species; this might either be due to a different release mechanism without a further photochemical step or a strong spectral shift of the dicarbonyl's absorption. Both reasons could explain why degenerate pump-repump-probe spectroscopy is inefficient. However, further experiments with ultraviolet probe pulses could substantiate whether the intermediate dicarbonyl reacts further photochemically or not. Apart from the model-system character of the CORM for bond dissociation, the study could determine exactly how many CO ligands are initially photolyzed off. Detailed knowledge of the release mechanism will affect the previous use and application as well as the further development of CORMs as therapeutic prodrugs to deliver high local concentrations of CO in cancerous or pathological tissue. Hence, the study of two-photon absorption properties which are important for in vivo applications of CORMs should be the main focus in further spectroscopic experiments. In Chapter 6, both abovementioned molecular phenomena—electron transfer and bond dissociation—were studied in combination. The photochemistry of a tetrazolium salt was studied in detail in a variety of different solvents. Being a relatively small molecule, the studied tetrazolium cation shows a multifaceted photochemistry and is therefore a textbook example for the combination of ultrafast molecular phenomena studied in different environments. Within femtoseconds, the tetrazolium ring is opened. The biradicalic species is then reduced via uptake of an electron from the solvent. The formation of the ring-open formazan photoproduct from this point of the reaction sequence on was excluded by experiments with acidic pH value of the solution. The ring-open radical is stabilized by ring-closure. The resulting tetrazolinyl radical was already observed in experiments with microsecond time resolution. However, its formation was observed in real time for the first time in this study. Irradiation of a tetrazoliumsalt solution yields different photoproduct distributions depending on the solvent. However, it was shown that all photoproducts have a tetrazolinyl radical as a common precursor on an ultrafast time scale. In combination with studies from the literature, the complete photochemical conversion of a tetrazolium salt was clarified in this study. Apart from the prototype character of the reaction sequence, the reaction mechanism will have impact on research associated with life science where tetrazolium assays are used on a daily basis without taking into account of photochemical conversion of the indicating tetrazolium ion and its photochemically formed reactive intermediates. On the basis of the tetrazolium-ion photochemistry, the rich photochemistry of the formazan photoproduct, including structural rearrangements and subsequent reformation of the tetrazolium ion, might be the subject of future studies. This thesis shows a method advancement and application of transient absorption spectroscopy to exemplary molecular model systems. The insights into each respective field did not only enlighten singular aspects, but have to be seen in a much larger context. Understanding complex photoinduced processes bottom-up by learning about their constituting steps—microscopically and on an ultrafast time scale—is an ideal method to approach understanding and prediction of phenomena in large molecular systems like biological or artificial architectures as for example used in photosynthetic light-harvesting and photovoltaics.}, subject = {Ultrakurzzeitspektroskopie}, language = {en} } @unpublished{RoederHumeniukGiegerichetal.2017, author = {R{\"o}der, Anja and Humeniuk, Alexander and Giegerich, Jens and Fischer, Ingo and Poisson, Lionel and Mitric, Roland}, title = {Femtosecond Time-Resolved Photoelectron Spectroscopy of the Benzyl Radical}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, doi = {10.1039/C7CP01437F}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159474}, year = {2017}, abstract = {We present a joint experimental and computational study of the nonradiative deactivation of the benzyl radical, C\(_7\)H\(_7\) after UV excitation. Femtosecond time-resolved photoelectron imaging was applied to investigate the photodynamics of the radical. The experiments were accompanied by excited state dynamics simulations using surface hopping. Benzyl has been excited at 265 nm into the D-band (\(\pi\pi^*\)) and the dynamics was probed using probe wavelengths of 398 nm or 798 nm. With 398 nm probe a single time constant of around 70-80 fs was observed. When the dynamics was probed at 798 nm, a second time constant \(\tau_2\)=1.5 ps was visible. It is assigned to further non-radiative deactivation to the lower-lying D\(_1\)/D\(_2\) states.}, language = {en} } @article{RudolfKanalGehrigetal.2013, author = {Rudolf, P. and Kanal, F. and Gehrig, D. and Niesel, J. and Brixner, T. and Schatzschneider, U. and Nuernberger, P.}, title = {Femtosecond mid-infrared study of the aqueous solution photochemistry of a CO-releasing molecule (CORM)}, series = {EPJ Web of Conferences}, volume = {41}, journal = {EPJ Web of Conferences}, doi = {10.1051/epjconf/20134105004}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-129104}, pages = {05004}, year = {2013}, abstract = {Ultraviolet irradiation of CO-releasing molecules (CORMs) in water eventually leads to the loss of several carbon monoxide ligands.We show for an exemplary manganese tricarbonyl CORM that only one ligand is photolyzed off on an ultrafast timescale and that some molecules may undergo geminate recombination.}, language = {en} } @phdthesis{Buback2011, author = {Buback, Johannes}, title = {Femtochemistry of Pericyclic Reactions and Advances towards Chiral Control}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-66484}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Pericyclic reactions possess changed reactivities in the excited state compared to the ground state which complement each other, as can be shown by simple frontier molecular orbital analysis. Hence, most molecules that undergo pericyclic reactions feature two different photochemical pathways. In this thesis an investigation of the first nanoseconds after excitation of Diazo Meldrum's acid (DMA) is presented. The time-resolved absorption change in the mid-infrared spectral region revealed indeed two reaction pathways after excitation of DMA with at least one of them being a pericyclic reaction (a sigmatropic rearrangement). These two pathways most probably start from different electronic states and make the spectroscopy of DMA especially interesting. Femtochemistry also allows the spectroscopy of very short-lived intermediates, which is discussed in context of the sequential mechanism of the Wolff rearrangement of DMA. An interesting application of pericyclic reactions are also molecular photoswitches, i.e. molecules that can be switched by light between two stable states. This work presents a photoswitch on the basis of a 6-pi-electrocyclic reaction, whose reaction dynamics after excitation are unravelled with transient-absorption spectroscopy for both switching directions. The 6-pi-electrocyclic reaction is especially attractive, because of the huge electronic changes and subsequent absorption changes upon switching between the ring-open and ring-closed form. Fulgides, diarlyethenes, maleimides as well as spiropyrans belong to this class of switches. Despite the popularity of spiropyrans, the femtochemistry of the ring-open form ("merocyanine") is still unknown to a great extent. The experiments in this thesis on this system combined with special modeling algorithms allowed to determine the quantum efficiencies of all reaction pathways of the system, including the ring-closure pathway. With the knowledge of the reaction dynamics, a multipulse control experiment showed that bidirectional full-cycle switching between the two stable states on an ultrafast time scale is possible. Such a controlled ultrafast switching is a process which is inaccessible with conventional light sources and may allow faster switching electronics in the future. Theoretical calculations suggest an enantioselective photochemistry, i.e. to influence the chirality of the emerging molecule with the chirality of the light, a field called "chiral control". The challenges that need to be overcome to prove a successful chiral control are extremely hard, since enantiosensitive signals, such as circular dichroism, are inherently very small. Hence, chiral control calls for a very sensitive detection as well as an experiment that cancels all effects that may influence the enantiosensitive signal. The first challenge, the sensitive detection, is solved with a polarimeter, which is optimized to be combined with femtosecond spectroscopy. This polarimeter will be an attractive tool for future chiral-control experiments due to its extreme sensitivity. The second challenge, the design of an artefact-free experiment, gives rise to a variety of new questions. The polarization state of the light is the decisive property in such an experiment, because on the one hand the polarization carries the chiral information of the excitation and on the other hand the change of the polarization or the intensity change dependent on the polarization is used as the enantiosensitive probing signal. A new theoretical model presented in this thesis allows to calculate the anisotropic distribution of any given pump-probe experiment in which any pulse can have any polarization state. This allows the design of arbitrary experiments for example polarization shaped pump-probe experiments. Furthermore a setup is presented and simulated that allows the shot-to-shot switching between mirror-images of light polarization states. It can be used either for control experiments in which the sample is excited with mirror-images of the pump polarization or for spectroscopy purposes, such as transient circular dichroism or transient optical rotatory dispersion. The spectroscopic results of this thesis may serve as a basis for these experiments. The parallel and sequential photochemical pathways of DMA and the feasibility of the bidirectional switching of 6,8-dinitro BIPS in a pump-repump experiment on the one hand offer a playground to test the relation of the anisotropy with the polarization of the pump, repump and probe pulse. On the other hand control experiments with varying pump and repump polarization may be able to take influence on the dynamics after excitation. Especially interesting is the combination of the 6,8-dinitro BIPS with the polarization-mirroring setup, because the closed form (spiropyran) is chiral. Perhaps in the future it will be possible to prove a cumulative circular-dichroism effect or even a chiral control with this system.}, subject = {Femtosekundenspektroskopie}, language = {en} } @phdthesis{Rewitz2014, author = {Rewitz, Christian}, title = {Far-Field Characterization and Control of Propagating Ultrashort Optical Near Fields}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-94887}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {In this work, femtosecond laser pulses are used to launch optical excitations on different nanostructures. The excitations are confined below the diffraction limit and propagate along the nanostructures. Fundamental properties of these ultrashort optical near fields are determined by characterizing the far-field emission after propagation with a setup developed for this task. Furthermore, control of the nanooptical excitations' spatial and temporal evolution is demonstrated for a designed nanostructure.}, subject = {Nahfeldoptik}, language = {en} } @phdthesis{Li2015, author = {Li, Han}, title = {Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123407}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {159}, year = {2015}, abstract = {In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.}, subject = {Kohlenstoff-Nanor{\"o}hre}, language = {en} } @unpublished{RoederPetersenIssleretal.2019, author = {R{\"o}der, Anja and Petersen, Jens and Issler, Kevin and Fischer, Ingo and Mitric, Roland and Poisson, Lionel}, title = {Exploring the Excited-State Dynamics of Hydrocarbon Radicals, Biradicals and Carbenes using Time-Resolved Photoelectron Spectroscopy and Field-Induced Surface Hopping Simulations}, series = {The Journal of Physical Chemistry A}, journal = {The Journal of Physical Chemistry A}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198734}, year = {2019}, abstract = {Reactive hydrocarbon molecules like radicals, biradicals and carbenes are not only key players in combustion processes and interstellar and atmospheric chemistry, but some of them are also important intermediates in organic synthesis. These systems typically possess many low-lying, strongly coupled electronic states. After light absorption, this leads to rich photodynamics characterized by a complex interplay of nuclear and electronic motion, which is still not comprehensively understood and not easy to investigate both experimentally and theoretically. In order to elucidate trends and contribute to a more general understanding, we here review our recent work on excited-state dynamics of open-shell hydrocarbon species using time-resolved photoelectron spectroscopy and field-induced surface hopping simulations, and report new results on the excited-state dynamics of the tropyl and the 1-methylallyl radical. The different dynamics are compared, and the difficulties and future directions of time-resolved photoelectron spectroscopy and excited state dynamics simulations of open-shell hydrocarbon molecules are discussed.}, language = {en} } @article{RuetzelKullmannBubacketal.2013, author = {Ruetzel, S. and Kullmann, M. and Buback, J. and Nuernberger, P. and Brixner, T.}, title = {Exploring higher-lying electronic states of a molecular switch by coherent triggered-exchange 2D electronic spectroscopy}, series = {EPJ Web of Conferences}, volume = {41}, journal = {EPJ Web of Conferences}, number = {05001}, doi = {10.1051/epjconf/20134105001}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-129117}, year = {2013}, abstract = {We use pump-repump-probe transient absorption spectroscopy to investigate the role of higher-lying electronic states in the photochemistry of a molecular switch. Moreover, replacing the pump pulse by a pulse-shaper-generated phase-stable double pulse, triggered-exchange two-dimensional (TE2D) electronic spectroscopy is established in the visible regime.}, language = {en} } @article{SawatzkyDrakopoulosRoelzetal.2016, author = {Sawatzky, Edgar and Drakopoulos, Antonios and R{\"o}lz, Martin and Sotriffer, Christoph and Engels, Bernd and Decker, Michael}, title = {Experimental and theoretical investigations into the stability of cyclic aminals}, series = {Beilstein Journal of Organic Chemistry}, volume = {12}, journal = {Beilstein Journal of Organic Chemistry}, doi = {10.3762/bjoc.12.221}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-160976}, pages = {2280-2292}, year = {2016}, abstract = {Background: Cyclic aminals are core features of natural products, drug molecules and important synthetic intermediates. Despite their relevance, systematic investigations into their stability towards hydrolysis depending on the pH value are lacking. Results: A set of cyclic aminals was synthesized and their stability quantified by kinetic measurements. Steric and electronic effects were investigated by choosing appropriate groups. Both molecular mechanics (MM) and density functional theory (DFT) based studies were applied to support and explain the results obtained. Rapid decomposition is observed in acidic aqueous media for all cyclic aminals which occurs as a reversible reaction. Electronic effects do not seem relevant with regard to stability, but the magnitude of the conformational energy of the ring system and pK a values of the N-3 nitrogen atom. Conclusion: Cyclic aminals are stable compounds when not exposed to acidic media and their stability is mainly dependent on the conformational energy of the ring system. Therefore, for the preparation and work-up of these valuable synthetic intermediates and natural products, appropriate conditions have to be chosen and for application as drug molecules their sensitivity towards hydrolysis has to be taken into account.}, language = {en} } @phdthesis{Walter2015, author = {Walter, Christof}, title = {Excitonic States and Optoelectronic Properties of Organic Semiconductors - A Quantum-Chemical Study Focusing on Merocyanines and Perylene-Based Dyes Including the Influence of the Environment}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123494}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The scope of computational chemistry can be broadened by developing new methods and more efficient algorithms. However, the evaluation of the applicability of the methods for the different fields of chemistry is equally important. In this thesis systems with an unusual and complex electronic structure, such as excitonic states in organic semiconductors, a boron-containing bipolaron and the excited states of pyracene were studied and the applicability of the toolkit of computational chemistry was investigated. Concerning the organic semiconductors the focus was laid on organic solar cells, which are one of the most promising technologies with regard to satisfying the world's need for cheap and environmentally sustainable energy. This is due to the low production and material costs and the possibility of using flexible and transparent devices. However, their efficiency does still not live up to the expectations. Especially the exciton diffusion lengths seem to be significantly too short. In order to arrive at improved modules, a fundamental understanding of the elementary processes occurring in the cell on the molecular and supramolecular level is needed. Computational chemistry can provide insight by separating the different effects and providing models for predictions and prescreenings. In this thesis, the focus was laid on the description of excitonic states in merocyanines and perylene-based dyes taking the influence of the environment into account. At first, the photochemical isomerization between two configurations of 6-nitro BIPS observed experimentally was studied by first benchmarking several functionals against SCS-ADC(2) in the gas phase and subsequently calculating the excited-state potential energy surface. The geometries obtained from a relaxed scan in the ground state as well as from a scan in the excited state were used. The environment was included using different polarizable continuum models. It was shown that the choice of the model and especially the question of the state specificity of the approach is of vital importance. Using the results of the calculations, a two-dimensional potential energy surface could be constructed that could be used to explain the experimental findings. Furthermore, the importance of the excited-state isomerization as a potential deactivation channel in the exciton transport was pointed out. Then the assessment of the suitability of different merocyanines for optoelectronic applications with quantum-chemical methods was discussed. At first, the effect of the environment on the geometry, especially on the bond length alternation pattern, was investigated. It was shown that the environment changes the character of the ground-state wave function of several merocyanines qualitatively, which means that the results of gas-phase calculations are meaningless - at least when a comparison with solution or device data is desired. It was demonstrated that using a polarizable continuum model with an effective epsilon, a qualitative agreement between the calculated geometry and the geometry in the crystal structure can be obtained. Therefore, by comparing the bond length alternation in solution and in the crystal, a rough estimate of the effect of the crystal environment can be made. It was further shown that the connection between the HOMO energy and the open-circuit voltage is not as simple as it is often implied in the literature. It was discussed that it is not clear whether the HOMO of a single molecule or a \$\pi\$-stack containing several monomers should be used and if the environmental charges of the bulk phase or the interface should be included. Investigating the dependence of the HOMO energy on the stack size yielded no definitive trend. Furthermore, it was discussed that the effect due the optimization of the modules (solvent, bulk heterojunction) during the production masks any potential correlation between the HOMO energy and measured open-circuit values. Therefore, a trend can only be expected for unoptimized bilayer cells. It was concluded that ultimately, the importance of the HOMO energy should not be overestimated. The correlation between the exciton reorganization energy and the so-called cyanine limit, which is predicted by a simple two-state model, was also discussed. By referring to the results of VB calculations, it was discussed that the correlation indeed exists and is non-negligible, although the effect is not as strong as one might have expected. In this context, a potential application of a VB/MM approach was covered briefly. The importance of the molecular reorganization energy and the device morphology was also discussed. It was concluded that the optimization of merocyanines for organic optoelectronic devices is inherently a multiparameter problem and one cannot expect to find one particular parameter, which solely controls the efficiency. The perylene-based dyes were studied with a focus on the description of a potential trapping mechanism involving an intermolecular motion in a dimer. The aim was to find methods which can be applied to larger model systems than a dimer and take the effect of the environment into account. As a test coordinate the longitudinal shift of two monomers against each other was used. At first, it was demonstrated how the character of an excited state in a dimer can be defined and how it can be extracted from a standard quantum-chemical calculation. Then several functionals were benchmarked and their applicability or failure was rationalized using the character analysis. Two recipes could be proposed, which were applied to a constraint optimization (only intermolecular degrees of freedom) in the excited states of the PBI dimer and to the description of the potential energy surfaces of ground and excited states along a longitudinal displacement in the perylene tetramer, respectively. It was further demonstrated that the semi-empirical OMx methods fail to give an accurate description of the excited-state potential energy surfaces as well as the ground-state surface along the test coordinate. This failure could be attributed to an underestimation of overlap-dependent terms. Consequently, it could be shown that the methods are applicable to large intermolecular distances, where the overlap is negligible. The results of DFT calculations with differently composed basis sets suggested that adding an additional single p-function for each atom should significantly improve the performance. QM/MM methods are ideally suited to take the effect of the environment on a a dimer model system into account. However, it was shown that standard force fields also give an incorrect description of the interaction between the monomers along the intermolecular coordinate. This failure was attributed to the isotropic atom-atom interaction in the repulsion term of the Lennard-Jones potential. This was corroborated using two simple proof-of-principle anisotropy models. Therefore, a novel force field called OPLS-AA_O was presented that is based on OPLS-AA, but uses an anisotropic model for the repulsion. The model involves the overlap integral between the molecular densities, which are modeled as a sum of atom-centered p-type Gaussian functions. It was shown that using this force field an excellent agreement with the DFT results can be obtained when the correct parameters are used. These parameters, however, are not very generalizable, which was attributed to the simplicity of the model in its current state (using the same exponential parameter for all atoms). As a short excursion, the applicability of an MO-based overlap model was discussed. It was demonstrated that the repulsion term based on the density overlap can be used to correct the failure of the OMx methods for the ground states. This is in accord with the assumption that an underestimation of the overlap terms is responsible for the failure. It was shown that OPLS-AA_O also gives an excellent description of the longitudinal shift in a PBI tetramer. Using the tetramer as a test system and applying the recipe obtained in the TDDFT benchmark for the QM-part and OPLS-AA_O for the MM-part in conjunction with an electrostatic embedding scheme, a QM/MM description of the excited states of the PBI dimer including the effect of the environment could be obtained. In the last chapter the theoretical description of the Bis(borolyl)thiophene dianion and the excited states of pyracene were discussed. The electronic structure of the Bis(borolyl)thiophene dianion - a negative bipolaron - was elucidated using DFT and CASPT2 methods. Furthermore, an estimation of the extent of triplet admixture to the ground state due to spin-orbit coupling was given. In the second project the S1 and S2 states of pyracene were computed using SCS-CC2 and SCS-ADC(2) and an estimation for the balance between aromaticity and ring strain was given. This also involved computing the vibrational frequencies in the excited states. In both studies the results of the computations were able to rationalize and complete experimental results.}, subject = {Exziton}, language = {en} } @article{RoehrLisinetskayaMitric2016, author = {R{\"o}hr, Merle I. S. and Lisinetskaya, Polina G. and Mitric, Roland}, title = {Excitonic Properties of Ordered Metal Nanocluster Arrays: 2D Silver Clusters at Multiporphyrin Templates}, series = {Journal of Physical Chemistry A}, volume = {120}, journal = {Journal of Physical Chemistry A}, number = {26}, doi = {10.1021/acs.jpca.6b04243}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159464}, pages = {4465-4472}, year = {2016}, abstract = {The design of ordered arrays of metal nanoclusters such as for example 2D cluster organic frameworks might open a new route towards the development of materials with tailored optical properties. Such systems could serve as plasmonically enhanced light-harvesting materials, sensors or catalysts. We present here a theoretical approach for the simulation of the optical properties of ordered arrays of metal clusters that is based on the ab initio parametrized Frenkel exciton model. We demonstrate that small atomically precise silver clusters can be assembled in one- and two-dimensional arrays on suitably designed porphyrin templates exhibiting remarkable optical properties. By employing explicit TDDFT calculations on smaller homologs, we show that the intrinsic optical properties of metal clusters are largely preserved but undergo J- and H-type excitonic coupling that results in controllable splitting of their excited states. Furthermore, ab initio parameterized Frenkel exciton model calculations allow us to predict an energetic splitting of up to 0.77 eV in extended two-dimensional square arrays and 0.79 eV in tilted square aggregates containing up to 25 cluster-porphyrin subunits.}, language = {en} } @unpublished{DietzschJayachandranMuelleretal.2023, author = {Dietzsch, Julia and Jayachandran, Ajay and Mueller, Stefan and H{\"o}bartner, Claudia and Brixner, Tobias}, title = {Excitonic coupling of RNA-templated merocyanine dimer studied by higher-order transient absorption spectroscopy}, series = {Chemical Communications}, journal = {Chemical Communications}, edition = {submitted version}, doi = {10.1039/D3CC02024J}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-327772}, year = {2023}, abstract = {We report the synthesis and spectroscopic analysis of RNA containing the barbituric acid merocyanine rBAM2 as a nucleobase surrogate. Incorporation into RNA strands by solid-phase synthesis leads to fluorescence enhancement compared to the free chromophore. In addition, linear absorption studies show the formation of an excitonically coupled H-type dimer in the hybridized duplex. Ultrafast third- and fifth-order transient absorption spectroscopy of this non-fluorescent dimer suggests immediate (sub-200 fs) exciton transfer and annihilation due to the proximity of the rBAM2 units.}, language = {en} } @unpublished{TitovHumeniukMitric2018, author = {Titov, Evgenii and Humeniuk, Alexander and Mitric, Roland}, title = {Exciton localization in excited-state dynamics of a tetracene trimer: A surface hopping LC-TDDFTB study}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198680}, year = {2018}, abstract = {Excitons in the molecular aggregates of chromophores are key participants in important processes such as photosynthesis or the functioning of organic photovoltaic devices. Therefore, the exploration of exciton dynamics is crucial. Here we report on exciton localization during excited-state dynamics of the recently synthesized tetracene trimer [Liu et al., Org. Lett., 2017, 19, 580]. We employ the surface hopping approach to nonadiabatic molecular dynamics in conjunction with the long-range corrected time-dependent density functional tight binding (LC-TDDFTB) method [Humeniuk and Mitrić, Comput. Phys. Commun., 2017, 221, 174]. Utilizing a set of descriptors based on the transition density matrix, we perform comprehensive analysis of exciton dynamics. The obtained results reveal an ultrafast exciton localization to a single tetracene unit of the trimer during excited-state dynamics, along with exciton transfer between units.}, language = {en} } @article{BrueningWehnerHausneretal.2016, author = {Br{\"u}ning, Christoph and Wehner, Johannes and Hausner, Julian and Wenzel, Michael and Engel, Volker}, title = {Exciton dynamics in perturbed vibronic molecular aggregates}, series = {Structural Dynamics}, volume = {3}, journal = {Structural Dynamics}, doi = {10.1063/1.4936127}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-126085}, pages = {043201}, year = {2016}, abstract = {A site specific perturbation of a photo-excited molecular aggregate can lead to a localization of excitonic energy. We investigate this localization dynamics for laser-prepared excited states. Changing the parameters of the electric field significantly influences the exciton localization which offers the possibility for a selective control of this process. This is demonstrated for aggregates possessing a single vibrational degree of freedom per monomer unit. It is shown that the effects identified for the molecular dimer can be generalized to larger aggregates with a high density of vibronic states.}, language = {en} } @phdthesis{Liu2011, author = {Liu, Wenlan}, title = {Exciton Coupling in Valence and Core Excited Aggregates of pi-Conjugated Molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-56169}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {Im Rahmen dieser Arbeit werden theoretische Modelle zur Beschreibung von Valenz- und Rumpf-angeregten elektronischen Zust{\"a}nden diskutiert. Im Fall der Valenz-Anregungen wurden time-dependend Hartree-Fock (TD-HF) und timedependent Dichtefunktionaltheorie (TD-DFT)Methoden mit verschiedenen Funktionalen f{\"u}r ein Perylenbisimid (PBI) System validiert. Eine einfache Analyse der Charakt{\"a}re der angeregten Zust{\"a}nde wurde vorgeschlagen, die auf den berechneten {\"U}bergangsdipolmomenten basiert. Dieser Ansatz ist allerdings auf Zust{\"a}nde beschr{\"a}nkt, die ein signifikantes {\"U}bergangsdipolmoment aufweisen. Deshalb wurde eine allgemeinere und fundiertere Methode entwickelt, die auf einer Analyse der berechneten CISWellenfunktion basiert. Dar{\"u}berhinaus wurde ein literaturbekannter Model-Hamiltonoperator Ansatz von einem lokalisierten Molek{\"u}lorbitalbild (MO) abgeleitet, das aus der generelleren Analyse-Methode resultiert. Auf diesem Weg ist ein Zugang zu diabatischen angeregten Zust{\"a}nden und korrespondierenden Kopplungsparametern auf der Basis von ab initio Rechnungen gegeben. F{\"u}r rumpfangeregte elektronische Zust{\"a}nde wurden drei Methoden f{\"u}r C 1s-angeregte und ionisierte Zust{\"a}nde verschiedener kleiner Molek{\"u}le validiert. Dar{\"u}berhinaus wurde die Basissatzabh{\"a}ngigkeit dieser Zust{\"a}nde untersucht. Anhand der Resultate wurde die frozen core N{\"a}herung ausgew{\"a}hlt um rumpfangeregte Zust{\"a}nde von Naphthalintetracarbons{\"a}uredianhydrid (NTCDA) zu berechnen. Um experimentelle Ergebnisse zu erkl{\"a}ren, wurde ein Algorithmus entwicklet, der die Exzitonenkopplungsparameter im Fall von nicht-orthogonalen MOs berechnet.}, subject = {Exziton}, language = {en} } @article{VermaSteinbacherSchmiedeletal.2016, author = {Verma, Pramod Kumar and Steinbacher, Andreas and Schmiedel, Alexander and Nuernberger, Patrick and Brixner, Tobias}, title = {Excited-state intramolecular proton transfer of 2-acetylindan-1,3-dione studied by ultrafast absorption and fluorescence spectroscopy}, series = {Structural Dynamics}, volume = {3}, journal = {Structural Dynamics}, doi = {10.1063/1.4937363}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-181301}, year = {2016}, abstract = {We employ transient absorption from the deep-UV to the visible region and fluorescence upconversion to investigate the photoinduced excited-state intramolecular proton-transfer dynamics in a biologically relevant drug molecule, 2-acetylindan-1,3-dione. The molecule is a ß-diketone which in the electronic ground state exists as exocyclic enol with an intramolecular H-bond. Upon electronic excitation at 300 nm, the first excited state of the exocyclic enol is initially populated, followed by ultrafast proton transfer (≈160 fs) to form the vibrationally hot endocyclic enol. Subsequently, solvent-induced vibrational relaxation takes place (≈10 ps) followed by decay (≈390 ps) to the corresponding ground state.}, language = {en} } @phdthesis{Noller2009, author = {Noller, Bastian}, title = {Excited-State Dynamics of Organic Intermediates}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-36075}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {This thesis gives insights into the real-time dynamics of several free carbenes and radicals on a femtosecond and nanosecond time scale. The experiments were performed with radicals, singlet carbenes and triplet carbenes of various sizes. Several neutral excited states as well as the ionic ground state were characterized. Despite the relevance of such reactive intermediates in almost all chemical reactions, only relatively little experimental information on such systems is found in the literature. This is linked to the experimental challenge of producing such species under isolated conditions. The intermediates are formed from precursor molecules under interaction- free conditions by supersonic jet flash pyrolysis. The precursor molecules were synthetically designed to show clean thermal dissociation into one specific intermediate. A large variety of spectroscopic techniques was applied to study the intermediates. Each method augments the results of the other methods. This enabled to successfully approach the main goal of this thesis: to understand the excited-state dynamics of organic intermediates. The excited states were found to deactivate rapidly to the hot ground state. The observed fast decay is presumably linked to coupled electronically excited states and relaxation takes place by internal conversion or conical intersections. Further reactions then take place on the ground state surface. Absorption spectra, photodissociation dynamics, photoelectron spectra, ionization potentials, excited-state lifetimes and dissociative photoionization were elucidated by the measurements. Pulsed and continuous light sources were used over a large spectral range (UV, Vis, VUV). A well-defined amount of energy was deposited into the molecule. After internal conversion has taken place, a microcanonical ensemble of reactive intermediates can be studied. This data helps to understand the energetics and reaction channels of intermediates. Velocity map imaging enabled to monitor the pyrolysis efficiency in real time by analyzing photoion images. This observation facilitates clean intermediate generation. Experimental results were compared to quantum chemical calculations to aid the interpretation as well as to test the performance of theoretical approaches. Hydrocarbon radicals and carbenes are regarded as benchmark systems for computational methods due to their several low-lying electronic states and open-shell electronic configuration. The experimental data can help to identify and understand the contributions of the examined intermediates to the chemistry of high energy environments (e. g., hydrocarbon cracking reactors, interstellar space and combustion chambers). Here increased numbers of hydrocarbon intermediates are often present and usually have a strong impact on the overall reaction mechanism. Such environments contain in general a complex mixture of several different intermediates. The more spectroscopic and dynamic properties of each isolated intermediate are known, the easier it is to identify it among multiple components and to understand how it contributes to the overall reaction mechanism. Electronic excitation can take place by radiation, particle collisions or thermally at very high temperatures. How excited states influence the reaction mechanisms is still a matter of currant research.}, subject = {Excited-State Dynamics of Organic Intermediates}, language = {en} } @phdthesis{Roeder2017, author = {R{\"o}der, Anja M.}, title = {Excited-State Dynamics in Open-Shell Molecules}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-151738}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {In this thesis the excited-state dynamics of radicals and biradicals were characterized with femtosecond pump-probe spectroscopy. These open-shell molecules play important roles as combustion intermediates, in the formation of soot and polycyclic aromatic hydrocarbons, in atmospheric chemistry and in the formation of complex molecules in the interstellar medium and galactic clouds. In these processes molecules frequently occur in some excited state, excited either by thermal energy or radiation. Knowledge of the reactivity and dynamics of these excited states completes our understanding of these complex processes. These highly reactive molecules were produced via pyrolysis from suitable precursors and examined in a molecular beam under collision-free conditions. A first laser now excites the molecule, and a second laser ionizes it. Time-of-flight mass spectrometry allowed a first identification of the molecule, photoelectron spectroscopy a complete characterization of the molecule - under the condition that the mass spectrum was dominated by only one mass. The photoelectron spectrum was obtained via velocity-map imaging, providing an insight in the electronic states involved. Ion velocity map imaging allowed separation of signal from direct ionization of the radical in the molecular beam and dissociative photoionization of the precursor. During this thesis a modified pBasex algorithm was developed and implemented in python, providing an image inversion tool without interpolation of data points. Especially for noisy photoelectron images this new algorithm delivers better results. Some highlighted results: • The 2-methylallyl radical was excited in the ππ*-state with different internal energies using three different pump wavelengths (240.6 , 238.0 and 236.0 nm). Ionized with 800 nm multi-photon probe, the photoelectron spectra shows a s-Rydberg fingerprint spectrum, a highly positive photoelectron anisotropy of 1.5 and a bi-exponential decay ( τ1= 141\pm43 fs, τ2= 4.0\pm0.2 ps for 240.6 nm pump), where the second time-constant shortens for lower wavelengths. Field-induced surface hopping dynamics calculations confirm that the initially excited ππ*-state relaxes very fast to an s-Rydberg state (first experimentally observed time-constant), and then more slowly to the first excited state/ground state (second time-constant). With higher excitation energies the conical intersection between the s-Rydberg-state and the first excited state is reached faster, resulting in shorter life-times. • The benzyl radical was excited yith 265 nm and probed with two wavelengths, 798 nm and 398 nm. Probed with 798 nm it shows a bi-exponential decay (\tau_{1}=84\pm5 fs, \tau_{2}=1.55\pm0.12 ps), whereas with 398 nm probe only the first time-constant is observed (\tau_{1}=89\pm5 fs). The photoelectron spectra with 798 nm probe is comparable to the spectrum with 398 nm probe during the first 60 fs, at longer times an additional band appears. This band is due to a [1+3']-process, whereas with 398 nm only signal from a [1+1']-process can be observed. Non-adiabatic dynamic on the fly calculations show that the initially excited, nearly degenerate ππ/p-Rydberg-states relax very fast (first time-constant) to an s-Rydberg state. This s-Rydberg state can no longer be ionized with 398 nm, but with 798 nm ionization via intermediate resonances is still possible. The s-Rydberg state then decays to the first excited state (second time-constant), which is long-lived. • Para-xylylene, excited with 266 nm into the S2-state and probed with 800 nm, shows a bi-exponential decay (\tau_{1}=38\pm7 fs, \tau_{2}=407\pm9 fs). The initially excited S2-state decays quickly to S1-state, which shows dissociative photoionization. The population of the S1-state is directly visible in the masses of the dissociative photoionization products, benzene and the para-xylylene -H. • Ortho-benzyne, produced via pyrolysis from benzocyclobutendione, was excited with 266 nm in the S2 state and probed with 800 nm. In its time-resolved mass spectra the dynamic of the ortho-benzyne signal was superposed with the dynamics from dissociative photoionization of the precursor and of the ortho-benzyne-dimer. With time-resolved ion imaging gated on the ortho-benzyne these processes could be seperated, showing that the S2-state of ortho-benzyne relaxes within 50 fs to the S1-state.}, subject = {Radikal }, language = {en} } @article{LisinetskayaBraunProchetal.2016, author = {Lisinetskaya, Polina and Braun, Christian and Proch, Sebastian and Kim, Young Dok and Gantef{\"o}r, Gerd and Mitrić, Roland}, title = {Excited state nonadiabatic dynamics of bare and hydrated anionic gold clusters Au\(^-_3\)[H\(_2\)O]\(_n\) (n=0-2)}, series = {Physical Chemistry Chemical Physics}, volume = {18}, journal = {Physical Chemistry Chemical Physics}, number = {9}, issn = {1463-9076}, doi = {10.1039/c5cp04297f}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159176}, pages = {6411-6419}, year = {2016}, abstract = {We present a joint theoretical and experimental study of excited state dynamics in pure and hydrated anionic gold clusters Au\(^-_3\)[H\(_2\)O]\(_n\) (n = 0-2). We employ mixed quantum-classical dynamics combined with femtosecond time-resolved photoelectron spectroscopy in order to investigate the influence of hydration on excited state lifetimes and photo-dissociation dynamics. A gradual decrease of the excited state lifetime with the number of adsorbed water molecules as well as gold cluster fragmentation quenching by two or more water molecules are observed both in experiment and in simulations. Non-radiative relaxation and dissociation in excited states are found to be responsible for the excited state population depletion. Time constants of these two processes strongly depend on the number of water molecules leading to the possibility to modulate excited state dynamics and fragmentation of the anionic cluster by adsorption of water molecules.}, language = {en} } @unpublished{WohlgemuthMitric2020, author = {Wohlgemuth, Matthias and Mitric, Roland}, title = {Excitation energy transport in DNA modelled by multi-chromophoric field-induced surface hopping}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, edition = {submitted version}, doi = {10.1039/D0CP02255A}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-209467}, year = {2020}, abstract = {Absorption of ultraviolet light is known as a major source of carcinogenic mutations of DNA. The underlying processes of excitation energy dissipation are yet not fully understood. In this work we provide a new and generally applicable route for studying the excitation energy transport in multi-chromophoric complexes at an atomistic level. The surface-hopping approach in the frame of the extended Frenkel exciton model combined with QM/MM techniques allowed us to simulate the photodynamics of the alternating (dAdT)10 : (dAdT)10 double-stranded DNA. In accordance with recent experiments, we find that the excited state decay is multiexponential, involving a long and a short component which are due to two distinct mechanisms: formation of long-lived delocalized excitonic and charge transfer states vs. ultrafast decaying localized states resembling those of the bare nucleobases. Our simulations explain all stages of the ultrafast photodynamics including initial photoexcitation, dynamical evolution out of the Franck-Condon region, excimer formation and nonradiative relaxation to the ground state.}, language = {en} } @article{HocheFlockMiaoetal.2021, author = {Hoche, Joscha and Flock, Marco and Miao, Xincheng and Philipp, Luca Nils and Wenzel, Michael and Fischer, Ingo and Mitric, Roland}, title = {Excimer formation dynamics in the isolated tetracene dimer}, series = {Chemical Science}, volume = {12}, journal = {Chemical Science}, number = {36}, doi = {10.1039/D1SC03214C}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-251559}, pages = {11965 -- 11975}, year = {2021}, abstract = {The understanding of excimer formation and its interplay with the singlet-correlated triplet pair state \(^{1}\)(TT) is of high significance for the development of efficient organic electronics. Here, we study the photoinduced dynamics of the tetracene dimer in the gas phase by time-resolved photoionisation and photoion imaging experiments as well as nonadiabatic dynamics simulations in order to obtain mechanistic insight into the excimer formation dynamics. The experiments are performed using a picosecond laser system for excitation into the S\(_{2}\) state and reveal a biexponential time dependence. The time constants, obtained as a function of excess energy, lie in the range between ≈10 ps and 100 ps and are assigned to the relaxation of the excimer on the S\(_{1}\) surface and to its deactivation to the ground state. Simulations of the quantum-classical photodynamics are carried out in the frame of the semi-empirical CISD and TD-lc-DFTB methods. Both theoretical approaches reveal a dominating relaxation pathway that is characterised by the formation of a perfectly stacked excimer. TD-lc-DFTB simulations have also uncovered a second relaxation channel into a less stable dimer conformation in the S\(_{1}\) state. Both methods have consistently shown that the electronic and geometric relaxation to the excimer state is completed in less than 10 ps. The inclusion of doubly excited states in the CISD dynamics and their diabatisation further allowed to observe a transient population of the \(^{1}\)(TT) state, which, however, gets depopulated on a timescale of 8 ps, leading finally to the trapping in the excimer minimum.}, language = {en} } @unpublished{LambertVoelkerKochetal.2015, author = {Lambert, Christoph and V{\"o}lker, Sebastian F. and Koch, Federico and Schmiedel, Alexander and Holzapfel, Marco and Humeniuk, Alexander and R{\"o}hr, Merle I. S. and Mitric, Roland and Brixner, Tobias}, title = {Energy Transfer Between Squaraine Polymer Sections: From helix to zig-zag and All the Way Back}, series = {Journal of the American Chemical Society}, journal = {Journal of the American Chemical Society}, doi = {10.1021/jacs.5b03644}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159607}, year = {2015}, abstract = {Joint experimental and theoretical study of the absorption spectra of squaraine polymers in solution provide evidence that two different conformations are present in solution: a helix and a zig-zag structure. This unique situation allows investigating ultrafast energy transfer processes between different structural segments within a single polymer chain in solution. The understanding of the underlying dynamics is of fundamental importance for the development of novel materials for light-harvesting and optoelectronic applications. We combine here femtosecond transient absorption spectroscopy with time-resolved 2D electronic spectroscopy showing that ultrafast energy transfer within the squaraine polymer chains proceeds from initially excited helix segments to zig-zag segments or vice versa, depending on the solvent as well as on the excitation wavenumber. These observations contrast other conjugated polymers such as MEH-PPV where much slower intrachain energy transfer was reported. The reason for the very fast energy transfer in squaraine polymers is most likely a close matching of the density of states between donor and acceptor polymer segments because of very small reorganization energy in these cyanine-like chromophores.}, language = {en} } @unpublished{AuerhammerSchulzSchmiedeletal.2019, author = {Auerhammer, Nina and Schulz, Alexander and Schmiedel, Alexander and Holzapfel, Marco and Hoche, Joscha and R{\"o}hr, Merle I. S. and Mitric, Roland and Lambert, Christoph}, title = {Dynamic exciton localisation in a pyrene-BODIPY-pyrene dye conjugate}, series = {Physical Chemistry Chemical Physics}, journal = {Physical Chemistry Chemical Physics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198718}, year = {2019}, abstract = {The photophysics of a molecular triad consisting of a BODIPY dye and two pyrene chromophores attached in 2-position are investigated by steady state and fs-time resolved transient absorption spectroscopy as well as by field induced surface hopping (FISH) simulations. While the steady state measurements indicate moderate chromophore interactions within the triad, the time resolved measurements show upon pyrene excitation a delocalised excited state which localises onto the BODIPY chromophore with a time constant of 0.12 ps. This could either be interpreted as an internal conversion process within the excitonically coupled chromophores or as an energy transfer from the pyrenes to the BODIPY dye. The analysis of FISH-trajectories reveals an oscillatory behaviour where the excitation hops between the pyrene units and the BODIPY dye several times until finally they become localised on the BODIPY chromophore within 100 fs. This is accompanied by an ultrafast nonradiative relaxation within the excitonic manifold mediated by the nonadiabatic coupling. Averaging over an ensemble of trajectories allowed us to simulate the electronic state population dynamics and determine the time constants for the nonradiative transitions that mediate the ultrafast energy transfer and exciton localisation on BODIPY.}, language = {en} } @article{HirschPachnerFischeretal.2020, author = {Hirsch, Florian and Pachner, Kai and Fischer, Ingo and Issler, Kevin and Petersen, Jens and Mitric, Roland and Bakels, Sjors and Rijs, Anouk M.}, title = {Do Xylylenes Isomerize in Pyrolysis?}, series = {ChemPhysChem}, volume = {21}, journal = {ChemPhysChem}, number = {14}, doi = {10.1002/cphc.202000317}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-218316}, pages = {1515 -- 1518}, year = {2020}, abstract = {We report infrared spectra of xylylene isomers in the gas phase, using free electron laser (FEL) radiation. All xylylenes were generated by flash pyrolysis. The IR spectra were obtained by monitoring the ion dip signal, using a IR/UV double resonance scheme. A gas phase IR spectrum of para-xylylene  was recorded, whereas ortho- and meta-xylylene were found to partially rearrange to benzocyclobutene and styrene. Computations of the UV oscillator strength  for all molecules were carried out and provde an explanation for the observation of the isomerization products.}, language = {en} } @phdthesis{Preitschopf2023, author = {Preitschopf, Tobias}, title = {Disentangling the Formation of PAHs in Extreme Environments by IR/UV Double Resonance Spectroscopy}, doi = {10.25972/OPUS-32279}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322791}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Polycyclic Aromatic Hydrocarbons (PAHs) are considered as key building blocks in the formation of carbonaceous particles such as soot. In our immediate surroundings, they are mainly generated in incomplete combustion processes and are further considered as carriers of the Unidentified Infrared Bands which are detected in a wide variety of astrophysical envelopes in the interstellar medium. Currently, astrochemical as well as combustion related models favour small resonance stabilized radicals (RSR) as major contributors to PAHs in sequential reactions. Therefore, we generated two RSR under well-defined conditions to investigate their contribution to PAH formation in a pyrolysis microreactor. The various reaction products were identified by IR/UV ion dip spectroscopy which combines the mass-selectivity of UV light with the structural sensitivity of IR radiation. Finally, we investigated the intermolecular interactions in azaphenanthrene dimers in combination with high-level theoretical calculations and found a preferential formation of pi-stacked van der Waals cluster in a molecular jet expansion.}, subject = {Infrarotspektroskopie}, language = {en} } @article{DostalFennelKochetal.2018, author = {Dost{\´a}l, Jakub and Fennel, Franziska and Koch, Federico and Herbst, Stefanie and W{\"u}rthner, Frank and Brixner, Tobias}, title = {Direct observation of exciton-exciton interactions}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, doi = {10.1038/s41467-018-04884-4}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-226271}, year = {2018}, abstract = {Natural light harvesting as well as optoelectronic and photovoltaic devices depend on efficient transport of energy following photoexcitation. Using common spectroscopic methods, however, it is challenging to discriminate one-exciton dynamics from multi-exciton interactions that arise when more than one excitation is present in the system. Here we introduce a coherent two-dimensional spectroscopic method that provides a signal only in case that the presence of one exciton influences the behavior of another one. Exemplarily, we monitor exciton diffusion by annihilation in a perylene bisimide-based J-aggregate. We determine quantitatively the exciton diffusion constant from exciton-exciton-interaction 2D spectra and reconstruct the annihilation-free dynamics for large pump powers. The latter enables for ultrafast spectroscopy at much higher intensities than conventionally possible and thus improves signal-to-noise ratios for multichromophore systems; the former recovers spatio-temporal dynamics for a broad range of phenomena in which exciton interactions are present.}, language = {en} } @article{CuiDietzHaerterichetal.2021, author = {Cui, Jingjing and Dietz, Maximilian and H{\"a}rterich, Marcel and Fantuzzi, Felipe and Lu, Wei and Dewhurst, Rian D. and Braunschweig, Holger}, title = {Diphosphino-Functionalized 1,8-Naphthyridines: a Multifaceted Ligand Platform for Boranes and Diboranes}, series = {Chemistry—A European Journal}, volume = {27}, journal = {Chemistry—A European Journal}, number = {63}, doi = {10.1002/chem.202102721}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-256994}, pages = {15751-15756}, year = {2021}, abstract = {A 1,8-naphthyridine diphosphine (NDP) reacts with boron-containing Lewis acids to generate complexes featuring a number of different naphthyridine bonding modes. When exposed to diborane B\(_{2}\)Br\(_{4}\), NDP underwent self-deprotonation to afford [NDP-B\(_{2}\)Br\(_{3}\)]Br, an unsymmetrical diborane comprised of four fused rings. The reaction of two equivalents of monoborane BBr\(_{3}\) and NDP in a non-polar solvent provided the simple phosphine-borane adduct [NDP(BBr\(_{3}\))\(_{2}\)], which then underwent intramolecular halide abstraction to furnish the salt [NDP-BBr\(_{2}\)][BBr\(_{4}\)], featuring a different coordination mode from that of [NDP-B\(_{2}\)Br\(_{3}\)]Br. Direct deprotonation of NDP by KHMDS or PhCH2K generates mono- and dipotassium reagents, respectively. The monopotassium reagent reacts with one or half an equivalent of B\(_{2}\)(NMe\(_{2}\))\(_{2}\)Cl\(_{2}\) to afford NDP-based diboranes with three or four amino substituents.}, language = {en} } @article{SchuergerEngel2023, author = {Sch{\"u}rger, Peter and Engel, Volker}, title = {Differential Shannon entropies characterizing electron-nuclear dynamics and correlation: momentum-space versus coordinate-space wave packet motion}, series = {Entropy}, volume = {25}, journal = {Entropy}, number = {7}, issn = {1099-4300}, doi = {10.3390/e25070970}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-362670}, year = {2023}, abstract = {We calculate differential Shannon entropies derived from time-dependent coordinate-space and momentum-space probability densities. This is performed for a prototype system of a coupled electron-nuclear motion. Two situations are considered, where one is a Born-Oppenheimer adiabatic dynamics, and the other is a diabatic motion involving strong non-adiabatic transitions. The information about coordinate- and momentum-space dynamics derived from the total and single-particle entropies is discussed and interpreted with the help of analytical models. From the entropies, we derive mutual information, which is a measure for the electron-nuclear correlation. In the adiabatic case, it is found that such correlations are manifested differently in coordinate- and momentum space. For the diabatic dynamics, we show that it is possible to decompose the entropies into state-specific contributions.}, language = {en} } @phdthesis{Ansorg2015, author = {Ansorg, Kay}, title = {Development of Accurate Physically Grounded Force Fields for Intermolecular Cation-\$\pi\$ Interactions based on SAPT Energy Decomposition Analysis and Computational Investigation of Covalent Irreversible Vinyl Sulfone-based Protease Inhibitors}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-131084}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Part 1 of this work describes the development of accurate physically grounded force fields for intermolecular Cation-π interactions based on SAPT energy decomposition analysis. The presented results demonstrate the benefits of the used DFT-SAPT method to describe non-bonding interactions. First of all, this method is able to reproduce the high level CCSD(T) energy values but using much less computational time. Second it provides the possibility to separate the total intermolecular interaction energy into several physically meaningful contributions. The relative contributions of the dimers investigated can be seen in Fig. 6.16. In Tab. 6.3 the percentage contribution of the attractive energy parts to the stabilization energy is shown. The polarization energy is important for the NH+...C6H6 interaction, whereas it becomes less crucial considering other dimers. The dispersion energy contribution is large in the case of the C6H6...H2O dimers, whereas it is relatively less important for the NH+...C6H6 interaction. The electrostatic energy contributes a large amount of stabilizing energy in all considered dimer interactions. ...}, subject = {Kraftfeld}, language = {en} } @phdthesis{Becker2015, author = {Becker, Johannes}, title = {Development and implementation of new simulation possibilities in the CAST program package}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-132032}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {The aim of the present work is the development and implementation of new simulation possibilities for the CAST program package. Development included, among other things, the partial parallelization of the already existing force fields, extension of the treatment of electrostatic interactions and implementation of molecular dynamics and free energy algorithms. The most time consuming part of force field calculations is the evaluation of the nonbonded interactions. The calculation of these interactions has been parallelized and it could be shown to yield a significant speed up for multi-core calculations compared to the serial execution on only one CPU. For both, simple energy/gradient as well as molecular dynamics simulations the computational time could be significantly reduced. To further increase the performance of calculations employing a cutoff radius, a linkedcell algorithm was implemented which is able to build up the non-bonded interaction list up to 7 times faster than the original algorithm. To provide access to dynamic properties based on the natural time evolution of a system, a molecular dynamics code has been implemented. The MD implementation features two integration schemes for the equations of motion which are able to generate stable trajectories. The basic MD algorithm as described in Section 1.2 leads to the sampling in the microcanonical (NVE) ensemble. The practical use of NVE simulations is limited though because it does not correspond to any experimentally realistic situation. More realistic simulation conditions are found in the isothermal (NVT) and isothermalisobaric (NPT) ensembles. To generate those ensembles, temperature and pressure control has been implemented. The temperature can be controlled in two ways: by direct velocity scaling and by a Nose-Hoover thermostat which produces a real canonical ensemble. The pressure coupling is realized by implementation of a Berendsen barostat. The pressure coupling can be used for isotropic or anisotropic box dimensions with the restriction that the angles of the box need to be 90� . A crucial simulation parameter in MD simulations is the length of the timestep. The timestep is usually in the rang of 1fs. Increasing the timestep beyond 1fs can lead to unstable trajectories since the fastest motion in the system, usually the H-X stretch vibration can not be sampled anymore. A way to allow for bigger timesteps is the use of a constraint algorithm which constrains the H-X bonds to the equilibrium distance. For this the RATTLE algorithm has been implemented in the CAST program. The velocity Verlet algorithm in combination with the RATTLE algorithm has been shown to yield stable trajectories for an arbitrary length of simulation time. In a first application the MD implementation is used in conjunction with the MOPAC interface for the investigation of PBI sidechains and their rigidity. The theoretical investigations show a nice agreement with experimentally obtained results. Based on the MD techniques two algorithms for the determination of free energy differences have been implemented. The umbrella sampling algorithm can be used to determine the free energy change along a reaction coordinate based on distances or dihedral angles. The implementation was tested on the stretching of a deca-L-alanine and the rotation barrier of butane in vacuum. The results are in nearly perfect agreement with literature values. For the FEP implementation calculations were performed for a zero-sum transformation of ethane in explicit solvent, the charging of a sodium ion in explicit solvent and the transformations of a tripeptide in explicit solvent. All results are in agreement with benchmark calculations of the NAMD program as well as literature values. The FEP formalism was then applied to determine the relative binding free energies between two inhibitors in an inhibitor-protein complex. Next to force fields, ab-initio methods can be used for simulations and global optimizations. Since the performance of such methods is usually significantly poorer than force field applications, the use for global optimizations is limited. Nevertheless significant progress has been made by porting these codes to GPUs. In order to make use of these developments a MPI interface has been implemented into CAST for communication with the DFT code TeraChem. The CAST/TeraChem combination has been tested on the \$H_2 O_{10}\$ cluster as well as the polypeptide met-Enkephalin. The pure ab-initio calculations showed a superior behavior compared to the standard procedure where the force field results are usually refined using quantum chemical methods.}, subject = {Molekulardynamik}, language = {en} } @phdthesis{Pres2024, author = {Pres, Sebastian}, title = {Detection of a plasmon-polariton quantum wave packet by coherent 2D nanoscopy}, doi = {10.25972/OPUS-34824}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-348242}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2024}, abstract = {Plasmonic nanostructures are considered promising candidates for essential components of integrated quantum technologies because of their ability to efficiently localize broad-band electromagnetic fields on the nanoscale. The resulting local near field can be understood as a spatial superposition of spectrally different plasmon-polariton modes due to the spectrally broad optical excitation, and thus can be described as a classical wave packet. Since plasmon polaritons, in turn, can transmit and receive non-classical light states, the exciting question arises to what extent they have to be described as quantum mechanical wave packets, i.e. as a superposition of different quantum states. But how to probe, characterize and eventually manipulate the quantum state of such plasmon polaritons? Up to now, probing at room temperatures relied completely on analyzing quantum optical properties of the corresponding in-going and out-going far-field photon modes. However, these methods so far only allow a rather indirect investigation of the plasmon-polariton quantum state by means of transfer into photons. Moreover, these indirect methods lack spatial resolution and therefore do not provide on-site access to the plasmon-polariton quantum state. However, since the spectroscopic method of coherent two-dimensional (2D) nanoscopy offers the capability to follow the plasmon- polariton quantum state both in Hilbert space and in space and time domain a complete characterization of the plasmon polariton is possible. In this thesis a versatile coherent 2D nanoscopy setup is presented combining spectral tunability and femtosecond time resolution with spatial resolution on the nanometer scale due to the detection of optically excited nonlinear emitted electrons via photoemission electron microscopy (PEEM). Optical excitation by amplitude- and phase-shaped, systematically-modified and interferometric-stable multipulse sequences is realized, and characterized via Fourier-transform spectral interferometry (FTSI). This linear technique enables efficient data acquisition in parallel to a simultaneously performed experiment. The full electric-field reconstruction of every generated multipulse sequence is used to analyze the effect of non-ideal pulse sequences on the two-dimensional spectral data of population-based multidimensional spectroscopy methods like, e.g., the coherent 2D nanoscopy applied in this thesis. Investigation of the spatially-resolved nonlinear electron emission yield from plasmonic gold nanoresonators by coherent 2D nanoscopy requires a quasi-particle treatment of the addressed plasmon-polariton mode and development of a quantum model to adequately describe the plasmon-assisted multi-quantum electron emission from nanostructures. Good agreement between simulated and experimental data enables to connect certain spectral features to superpositions of non-adjacent plasmon-polariton quantum states, i.e, non-adjacent occupation-number states of the underlying quantized, harmonic oscillator, thus direct probing of the plasmon-polariton quantum wave packet at the location of the nanostructure. This is a necessary step to locally control and manipulate the plasmon-polariton quantum state and thus of general interest for the realization of nanoscale quantum optical devices.}, subject = {Coherent Multidimensional Spectroscopy}, language = {en} } @phdthesis{Dem2003, author = {Dem, Claudiu Dorin}, title = {Design and construction of a device for light scattering studies on airborne particles}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9605}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2003}, abstract = {This thesis is concerned with the development of an on-line in-situ device for a chemical characterisation of flowing aerosols. The thesis describes the principles and most important features of such a system, allowing also on-line measurements using Raman spectroscopy as a diagnostic technique An analysis of the effect of forced oscillations on the motion of the particle dispersed in a gas flow is given in Chapter 2. Also the most important particle parameters are introduced. A review of the particle/fluid interaction in laminar air flows and the response of the particle is presented. In Chapter 3 the behaviour of the particle under different external conditions (ion bombardment and electric fields) is extended. A brief review of the most important particle charging theories (diffusion, field, and alternating potential charging) shows, that the effect of the electrical properties (represented by the dielectric constant) of the particles affects the charging process. A non-contact method for particle charge measurement was also presented. In the second part of the chapter, the interaction between the electric field and the charged particle for the purpose of particle trapping is illustrated. The most common systems like the two or four ring electrodynamic balance and the quadrupole trap are pointed out. In Chapter 4 a short review of the possibility of using scattered light to study aerosol particles is presented. First, the conditions and the facilities of using the Mie theory for particle size and refractive index determination are mentioned, then some features concerning the classical treatment of the Raman effect are presented Supported by the theoretical considerations exposed in Chapter 2, 3, and 4 the construction and the tests of different devices are presented in Chapter 5. Following the goal of the thesis, first an overview of the used materials and methods for particle generation is presented. Then, the constructed charging devices are described (from the mechanical and electrical point of view) and compared by measuring the acquired charge on the particle. Charged particles can be trapped in different containers. Two types of axially symmetric electrodynamic balances (two ring or an extended four ring configuration) were presented. For a deeper understanding these systems were studied using analytic and numerical methods. Considering the presented purpose of the work another type of trapping system has been developed, namely the quadrupole trap. A similar theoretical characterisation (in term's of Mathieu equation) as for the electrodynamic balance was presented pointing out some specific features of this system. The incoming particle stream will be focused to the centre of the system simultaneously also the applied DC and AC potential onto the tube electrodes, yields a stable trapping of one or more particles. Chapter 6 consists of two parts: the system for single particle and for many particles investigation. The individual devices presented in Chapter 5 are now put together. The first part presents the method and the experimental realisation of a set-up for solid particle injection. In order to suppress the phase injection disadvantage found for the electrodynamic balance a developed program processes the information obtained from a particle cloud through an adequate electronic detection system, and reduces the number of particles until just one single particle is trapped. The method for one particle investigation can be extended for many particles. Using the presented set-up the particles are moved from one quadrupole to another and transformed from a particle cloud to a particle stream. A linearity between an external vertical mounted detector and the formed image of the particle stream on the CCD camera has been observed and used for simultaneous detection of many particles by Raman spectroscopy. For both methods Raman results are presented. One limitation of Raman Spectroscopy is the relatively long integration time needed for adequate signal-to-noise ratio. There are two factors which influence the integration time: first the incident radiation and the detector sensitivity, and second the intensity of the Raman bands. Using a CCD detector, the desired detector sensitivity should be achieved. So, the improvement of the signal-to-noise ratio should be the next goal in the system development. In order to reduce the integration time an optical system including optic fibres and the integration of an FT-Raman module operating in the visible region is planed. The goal of this work was to develop and construct an instrument for on-line in-situ single particle investigation by Raman spectroscopy. With the presented experimental set-up and the developed program the purpose of the work, the on-line in-situ near atmospheric pressure aerosol investigation was achieved. The Raman spectroscopy has been used successfully for a chemical characterisation of the aerosol particles.}, subject = {Aerosol}, language = {en} } @article{ReuschHolzmeierGerlachetal.2019, author = {Reusch, Engelbert and Holzmeier, Fabian and Gerlach, Marius and Fischer, Ingo and Hemberger, Patrick}, title = {Decomposition of Picolyl Radicals at High Temperature: A Mass Selective Threshold Photoelectron Spectroscopy Study}, series = {Chemistry - A European Journal}, volume = {25}, journal = {Chemistry - A European Journal}, number = {72}, doi = {10.1002/chem.201903937}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-208132}, pages = {16652-16659}, year = {2019}, abstract = {The reaction products of the picolyl radicals at high temperature were characterized by mass-selective threshold photoelectron spectroscopy in the gas phase. Aminomethylpyridines were pyrolyzed to initially produce picolyl radicals (m /z =92). At higher temperatures further thermal reaction products are generated in the pyrolysis reactor. All compounds were identified by mass-selected threshold photoelectron spectroscopy and several hitherto unexplored reactive molecules were characterized. The mechanism for several dissociation pathways was outlined in computations. The spectrum of m /z =91, resulting from hydrogen loss of picolyl, shows four isomers, two ethynyl pyrroles with adiabatic ionization energies (IE\(_{ad}\)) of 7.99 eV (2-ethynyl-1H -pyrrole) and 8.12 eV (3-ethynyl-1H -pyrrole), and two cyclopentadiene carbonitriles with IE′s of 9.14 eV (cyclopenta-1,3-diene-1-carbonitrile) and 9.25 eV (cyclopenta-1,4-diene-1-carbonitrile). A second consecutive hydrogen loss forms the cyanocyclopentadienyl radical with IE′s of 9.07 eV (T\(_0\)) and 9.21 eV (S\(_1\)). This compound dissociates further to acetylene and the cyanopropynyl radical (IE=9.35 eV). Furthermore, the cyclopentadienyl radical, penta-1,3-diyne, cyclopentadiene and propargyl were identified in the spectra. Computations indicate that dissociation of picolyl proceeds initially via a resonance-stabilized seven-membered ring.}, language = {en} } @article{WohlgemuthMiyazakiTsukadaetal.2017, author = {Wohlgemuth, Matthias and Miyazaki, Mitsuhiko and Tsukada, Kohei and Weiler, Martin and Dopfer, Otto and Fujii, Masaaki and Mitrić, Roland}, title = {Deciphering environment effects in peptide bond solvation dynamics by experiment and theory}, series = {Physical Chemistry Chemical Physics}, volume = {19}, journal = {Physical Chemistry Chemical Physics}, number = {33}, doi = {10.1039/C7CP03992A}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-159647}, pages = {22564-22572}, year = {2017}, abstract = {Most proteins work in aqueous solution and the interaction with water strongly affects their structure and function. However, experimentally the motion of a specific single water molecule is difficult to trace by conventional methods, because they average over the heterogeneous solvation structure of bulk water surrounding the protein. Here, we provide a detailed atomistic picture of the water rearrangement dynamics around the -CONH- peptide linkage in the two model systems formanilide and acetanilide, which simply differ by the presence of a methyl group at the peptide linkage. The combination of picosecond pump-probe time-resolved infrared spectroscopy and molecular dynamics simulations demonstrates that the solvation dynamics at the molecular level is strongly influenced by this small structural difference. The effective timescales for solvent migration triggered by ionization are mainly controlled by the efficiency of the kinetic energy redistribution rather than the shape of the potential energy surface. This approach provides a fundamental understanding of protein hydration and may help to design functional molecules in solution with tailored properties.}, language = {en} } @phdthesis{Erdmann2004, author = {Erdmann, Marco}, title = {Coupled electron and nuclear dynamics in model systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9968}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2004}, abstract = {Subject of this work was to investigate the influence of nonadiabatic coupling on the dynamical changes of electron and nuclear density. The properties of electron density have neither been discussed in the stationary case, nor for excited electronic states or for a coupled electronic and nuclear motion. In order to remove these restrictions one must describe the quantum mechanical motion of all particles in a system at the same level. This is only possible for very small systems. A model system developed by Shin and Metiu [1, 2] contains all necessary physical ingredients to describe a combined electronic and nuclear motion. It consists of a single nuclear and electronic degree of freedom and the particle interaction is parameterized in such a way as to allow for a facile switching between and adiabatic (Born-Oppenheimer type) and a strongly coupled dynamics. The first part of the work determined the "static" properties of the model system: The calculation of electronic eigenfunctions, adiabatic potential curves, kinetic coupling elements and transition dipole moments allowed for a prediction of the coupled dynamics. The potentials obtained from different parameterization showed two distinct cases: In the first case the ground and first excited state are separated by a large energy gap which is the typical Born-Oppenheimer case; the second one exhibits an avoided crossing which results in a breakdown of the adiabatic approximation. Due to the electronic properties of the system, the quantum dynamics in the two distinct situations is very different. This was illustrated by calculating nuclear and electron densities as a function of time. In the Born-Oppenheimer case, the electron density followed the vibrational motion of the nucleus. This was demonstrated in two examples. In the strongly coupled case the wave packet did not exhibit features caused by nonadiabatic coupling. However, projections of the wave function onto the electronic states revealed the usual picture obtained from solutions of the nuclear Schr{\"o}dinger equation involving coupled electronic states. In that case the nuclear motion triggered charge transfer via nonadiabatic coupling. The second part of the work demonstrated that the model system can easily be modified to yield binding situations often found in diatomic molecules. The different situations can be characterized in terms of bound and dissociative adiabatic potential curves. The investigation focussed on the case of an electronic predissociation, where the ground state is dissociative in the asymptotic limit of large internuclear distances. Within our model system we were able to demonstrate how the character of the electron density changes during the fragmentation process. In the third part we investigated the influence of external fields on the correlated dynamics of electron and nucleus. Employing adiabatic potential curves, the structure of absorption spectra can be understood within the weak-field limit. In the above described Born-Oppenheimer case the adiabatically calculated spectrum was in very good agreement with the exact one, whereas in the strongly coupled case the obtained spectrum was not able to resemble the exact one. Regarding the dynamics during a laser excitation process the time-dependent electron and nuclear densities nicely illustrated the famous Franck-Condon principle. The interaction with strong laser pulses lead to an excitation of many bound electronic and vibrational states. The electron density reflected the classical-like quiver motion of the electron induced by the fast variations of the electric field. The nucleus did not follow these fast oscillations because of its much larger mass. The last part of the work extended the original model system by including an additional electron. As a consequence of the Pauli principle, the spatial electronic wave function has to be either symmetric or anti-symmetric with respect to exchange of the two electrons. This corresponds to anti-parallel or parallel electron spins, respectively. The extended model already contains the physical properties of a many-electron system. Solving the time-dependent Schr{\"o}dinger equation for a typical vibrational wave packet motion clearly indicated that the electron density is no longer suited to "localize" single electrons. We extended the definition of the electron localization function (ELF) to an exact, time-dependent wave function and demonstrated, how the ELF can be used to further characterize a coupled electron and nuclear motion. Finally, we gave an outlook of how to define electron localization in the case of anti-parallel electron spins. We derived a quantity similar to the ELF denoted "anti-parallel spin electron localization function" (ALF) and demonstrated that the ALF allows to follow time-dependent changes of the electron localization in a numerical example. [1] S. Shin, H. Metiu, J. Chem. Phys. 1995, 102, 9285. [2] S. Shin, H. Metiu, J. Phys. Chem. 1996, 100, 7867.}, subject = {Nichtadiabatischer Prozess}, language = {en} } @phdthesis{Lee2013, author = {Lee, Wook}, title = {Computational study on the catalytic mechanism of mtKasA}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-83989}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2013}, abstract = {Das Enzym KasA spielt eine entscheidende Rolle in der Biosynthese von Mykols{\"a}uren, den Bausteinen der Zellw{\"a}nde von Mycobacteriumtuberculosis. Dessen essentielle Notwendigkeit zeigt sich bei Abwesenheit von KasA in einer Zelllyse (Aufl{\"o}sung von Zellen) bei Mycobacteriumtuberculosis. Durch seine Bedeutung f{\"u}r Mycobacteriumtuberculosis, dem Erreger von Tuberkulose und damit der zweith{\"a}ufigsten Todesursache durch Infektionskrankheiten, stellt KasA ein vielversprechendes Ziel f{\"u}r die Entwicklung neuer Medikamente gegen Tuberkulose dar. Durch das Auftreten von extensiv resistenten St{\"a}mmen welche die meisten bekannten Antibiotika zur Bek{\"a}mpfung von Tuberkulose inaktivieren wird es dringend notwendig neue Medikamente gegen Tuberkulose zu entwickeln. In Kapitel 3.1 wird der Protonierungszustand der katalytischen Reste im Ruhezustand untersucht. F{\"u}r diese Untersuchungen wurden Free Energy Perturbation (FEP) Rechnungen und MD Simulationen verwendet. Die Ergebnisse zeigten, dass der zwitterionische Zustand am wahrscheinlichsten ist. Um diese Aussage mit weiteren handfesten Daten zu untermauern wurden Potential(hyper)fl{\"a}chen (PES) f{\"u}r den Protonentransfer zwischen neutralen und zwitterionischen Zustand mit Hilfe von QM/MM Methoden berechnet. Durch die starke Abh{\"a}ngigkeit der QM/MM Optimierung von der Ausgangsstruktur war es nicht m{\"o}glich konsistente Ergebnisse f{\"u}r diese Berechnungen zu bekommen. Um dieses Problem zu umgehen wurde ein auf QM/MM basierendes Umbrella Sampling mit Semiempirischen Methoden (RM1) durchgef{\"u}hrt. Die sich daraus ergebende PMF Fl{\"a}che zeigt das der zwitterionische Zustand stabiler ist als der neutrale Zustand. In Kapitel 3.2 wurde der Protonierungszustand der entsprechenden Reste im Acyl-Enzym Zustand untersucht. Im Unterschied zu anderen katalytischen Resten ist der Protonierungszustand von His311 ist nicht eindeutig im Acyl-Enzym Zustand und es ergeben sich aus den verschiedenen Protonierungszust{\"a}nden verschiedene Decarboxylierungsmechanismen. Um den wahrscheinlichsten Protonierungszustand bez{\"u}glich der freien Energie zu bestimmen wurden FEP Rechnungen durchgef{\"u}hrt. Die Ergebnisse zeigen, dass der pKa Wert an Nδ betr{\"a}chtlich durch die Enzymumgebung verringert wird, w{\"a}hrend dies f{\"u}r Nε nicht der Fall ist. Zus{\"a}tzlich dazu wurden die PMF Profile f{\"u}r den Protonentransfer zwischen Lys340 und Glu354 mit der QM/MM basierten Umbrella Sampling Methode berechnet. Die Ergebnisse zeigen, dass das Lys340/Glu354 Paar eher neutral als ionisch ist, wenn His311 an Nε protoniert ist. Ein relativ hoher ionischer Charakter des Lys340/Glu354 Paares, wenn His311 doppelt protoniert ist, gibt einen wertvollen Einblick in die Rolle welche das Lys340/Glu354 Paar beim verschieben des Protonierungszustandes von Nδ zu Nε im His311 nach dem Acyltransferschritt spielt. Die Ergebnisse zeigen, dass His311 neutral und an Nε protoniert ist. Ebenso ist das Lys340/Glu354 Paar neutral im Acyl-Enzym Zustand. Diese berechneten Ergebnisse f{\"u}hren zu dem Schluss, dass die Decarboxylierung durch ein Oxyanion Loch erleichtert wird welches aus zwei katalytischen Histidin Resten besteht. In Kapitel 3.3 wurde der Protonierungszustand der katalytischen Reste im Ruhezustand erneut untersucht da eine aktuelle Benchmarkstudie zeigte, dass die verwendete Semiempirische Methode (RM1) in Kapitel 3.1 dazu tendiert die Stabilisation des zwitterionischen Zustandes zu {\"u}bersch{\"a}tzen. Auch wurde in Kapitel 3.1 das Lys340/Glu354 Paar als rein ionisch angesehen, w{\"a}hrend sich in Kapitel 3.2 herausstellte, dass es sich um eine Mischung aus neutralen und ionischen Charakter handelt. Die neuen Untersuchungen beinhalten eine gr{\"o}ßere QM Region inklusive des Lys340/Glu354 Paares. Der daf{\"u}r verwendete BLYP/6-31G** Ansatz ist ausreichend akkurat f{\"u}r die aktuelle Fragestellung, was durch Vergleichsrechnungen bewiesen wurde. Die neuen Ergebnisse der QM/MM MD und FEP Rechnungen deuten an, dass die katalytischen Reste im Ruhezustand h{\"o}chst wahrscheinlich neutral vorliegen. Dies wiederum f{\"u}hrt zu der Frage wie KasA aktiviert werden kann um die katalytische Reaktion zu initiieren. Auf der Basis der Ergebnisse der MD Simulationen und FEP Rechnungen f{\"u}r den His311Ala Mutanten in Kapitel 3.1 stellten wir die Hypothese auf, dass die offene Konformation von Phe404 die Aktivierung der katalytischen Reste durch die (Aus)bildung einer starken Wasserstoffbindung einleitet. Die QM/MM MD Simulation best{\"a}tigt dass diese Aktivierung der katalytischen Reste durch die offene Konformation des Phe404 bewerkstelligt werden kann. Das entsprechende auf Kraftfeld basierende PMF Profil zeigt auch, dass dieser Konformationswechsel energetisch realisierbar ist. Die Verteilung der hydrophilen und hydrophoben Reste in der Malonyl Bindungstasche in Verbindung mit unseren berechneten Ergebnissen geben einen Einblick in den detaillierten}, subject = {Tuberkelbakterium}, language = {en} } @phdthesis{Wirsing2023, author = {Wirsing, Sara}, title = {Computational Spectroscopic Studies with Focus on Organic Semiconductor Systems}, doi = {10.25972/OPUS-28655}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-286552}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {This work presents excited state investigations on several systems with respect to experimental spectroscopic work. The majority of projects covers the temporal evolution of excitations in thin films of organic semiconductor materials. In the first chapters, thinfilm and interface systems are build from diindeno[1,2,3-cd:1',2',3'-lm]perylene (DIP) and N,N'-bis-(2-ethylhexyl)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDIR-CN2) layers, in the third chapter bulk systems consist of 4,4',4"-tris[(3-methylphenyl)phenylamino] triphenylamine (m-MTDATA), 4,7-diphenyl-1,10-phenanthroline (BPhen) and tris-(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane (3TPYMB). These were investigated by aggregate-based calculations. Careful selection of methods and incorporation of geometrical relaxation and environmental effects allows for a precise energetical assignment of excitations. The biggest issue was a proper description of charge-transfer excitations, which was resolved by the application of ionization potential tuning on aggregates. Subsequent characterization of excitations and their interplay condenses the picture. Therefore, we could assign important features of the experimental spectroscopic data and explain differences between systems. The last chapter in this work covers the analysis of single molecule spectroscopy on methylbismut. This poses different challenges for computations, such as multi-reference character of low-lying excitations and an intrinsic need for a relativistic description. We resolved this by combining complete active space self-consistent field based methods with scalarrelativistic density-functional theory. Thus we were able to confidently assign the spectroscopic features and explain underlying processes.}, subject = {Theoretische Chemie}, language = {en} } @article{KnorrSokkarSchottetal.2016, author = {Knorr, Johannes and Sokkar, Pandian and Schott, Sebastian and Costa, Paolo and Thiel, Walter and Sander, Wolfram and Sanchez-Garcia, Elsa and Nuernberger, Patrick}, title = {Competitive solvent-molecule interactions govern primary processes of diphenylcarbene in solvent mixtures}, series = {Nature Communications}, volume = {7}, journal = {Nature Communications}, doi = {10.1038/ncomms12968}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-165954}, pages = {12968}, year = {2016}, abstract = {Photochemical reactions in solution often proceed via competing reaction pathways comprising intermediates that capture a solvent molecule. A disclosure of the underlying reaction mechanisms is challenging due to the rapid nature of these processes and the intricate identification of how many solvent molecules are involved. Here combining broadband femtosecond transient absorption and quantum mechanics/molecular mechanics simulations, we show for one of the most reactive species, diphenylcarbene, that the decision-maker is not the nearest solvent molecule but its neighbour. The hydrogen bonding dynamics determine which reaction channels are accessible in binary solvent mixtures at room temperature. In-depth analysis of the amount of nascent intermediates corroborates the importance of a hydrogen-bonded complex with a protic solvent molecule, in striking analogy to complexes found at cryogenic temperatures. Our results show that adjacent solvent molecules take the role of key abettors rather than bystanders for the fate of the reactive intermediate.}, language = {en} } @unpublished{TitovHumeniukMitric2020, author = {Titov, Evgenii and Humeniuk, Alexander and Mitric, Roland}, title = {Comparison of moving and fixed basis sets for nonadiabatic quantum dynamics at conical intersections}, series = {Chemical Physics}, journal = {Chemical Physics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-199225}, year = {2020}, abstract = {We assess the performance of two different types of basis sets for nonadiabatic quantum dynamics at conical intersections. The basis sets of both types are generated using Ehrenfest trajectories of nuclear coherent states. These trajectories can either serve as a moving (time-dependent) basis or be employed to sample a fixed (time-independent) basis. We demonstrate on the example of two-state two-dimensional and three-state five-dimensional models that both basis set types can yield highly accurate results for population transfer at intersections, as compared with reference quantum dynamics. The details of wave packet evolutions are discussed for the case of the two-dimensional model. The fixed basis is found to be superior to the moving one in reproducing nonlocal spreading and maintaining correct shape of the wave packet upon time evolution. Moreover, for the models considered, the fixed basis set outperforms the moving one in terms of computational efficiency.}, language = {en} } @unpublished{TitovHumeniukMitric2020, author = {Titov, Evgenii and Humeniuk, Alexander and Mitric, Roland}, title = {Comparison of moving and fixed basis sets for nonadiabatic quantum dynamics at conical intersections}, series = {Chemical Physics}, journal = {Chemical Physics}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198699}, year = {2020}, abstract = {We assess the performance of two different types of basis sets for nonadiabatic quantum dynamics at conical intersections. The basis sets of both types are generated using Ehrenfest trajectories of nuclear coherent states. These trajectories can either serve as a moving (time-dependent) basis or be employed to sample a fixed (time-independent) basis. We demonstrate on the example of two-state two-dimensional and three-state five-dimensional models that both basis set types can yield highly accurate results for population transfer at intersections, as compared with reference quantum dynamics. The details of wave packet evolutions are discussed for the case of the two-dimensional model. The fixed basis is found to be superior to the moving one in reproducing true nonlocal spreading and maintaining correct shape of the wave packet upon time evolution. Moreover, for the models considered, the fixed basis set outperforms the moving one in terms of computational efficiency.}, language = {en} } @unpublished{LisinetskayaMitric2019, author = {Lisinetskaya, Polina G. and Mitric, Roland}, title = {Collective Response in DNA-Stabilized Silver Cluster Assemblies from First-Principles Simulations}, series = {The Journal of Physical Chemistry Letters}, journal = {The Journal of Physical Chemistry Letters}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198729}, year = {2019}, abstract = {We investigate fluorescence resonant energy transfer and concurrent electron dynamics in a pair of DNA-stabilized silver clusters. For this purpose we introduce a methodology for the simulation of collective optoelectronic properties of coupled molecular aggregates starting from first-principles quantum chemistry, which can be further applied to a broad range of coupled molecular systems to study their electro-optical response. Our simulations reveal the existence of low-energy coupled excitonic states, which enable ultrafast energy transport between subunits, and give insight into the origin of the fluorescence signal in coupled DNA-stabilized silver clusters, which have been recently experimentally detected. Hence, we demonstrate the possibility of constructing ultrasmall energy transmission lines and optical converters based on these hybrid molecular systems.}, language = {en} } @article{BrixnerKochKullmannetal.2013, author = {Brixner, Tobias and Koch, Federico and Kullmann, Martin and Selig, Ulrike and Nuernberger, Patrick and G{\"o}tz, Daniel C. G. and Bringmann, Gerhard}, title = {Coherent two-dimensional electronic spectroscopy in the Soret band of a chiral porphyrin dimer}, series = {New Journal of Physics}, journal = {New Journal of Physics}, doi = {10.1088/1367-2630/15/2/025006}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-96139}, year = {2013}, abstract = {Using coherent two-dimensional (2D) electronic spectroscopy in fully noncollinear geometry, we observe the excitonic coupling of β,β'-linked bis[tetraphenylporphyrinato-zinc(II)] on an ultrafast timescale in the excited state. The results for two states in the Soret band originating from an excitonic splitting are explained by population transfer with approximately 100 fs from the energetically higher to the lower excitonic state. This interpretation is consistent with exemplary calculations of 2D spectra for a model four-level system with coupling.}, language = {en} } @article{RoedingBrixner2018, author = {Roeding, Sebastian and Brixner, Tobias}, title = {Coherent two-dimensional electronic mass spectrometry}, series = {Nature Communications}, volume = {9}, journal = {Nature Communications}, number = {2519}, doi = {10.1038/s41467-018-04927-w}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-226458}, pages = {1-9}, year = {2018}, abstract = {Coherent two-dimensional (2D) optical spectroscopy has revolutionized our ability to probe many types of couplings and ultrafast dynamics in complex quantum systems. The dynamics and function of any quantum system strongly depend on couplings to the environment. Thus, studying coherent interactions for different environments remains a topic of tremendous interest. Here we introduce coherent 2D electronic mass spectrometry that allows 2D measurements on effusive molecular beams and thus on quantum systems with minimum system-bath interaction and employ this to identify the major ionization pathway of 3d Rydberg states in NO2. Furthermore, we present 2D spectra of multiphoton ionization, disclosing distinct differences in the nonlinear response functions leading to the ionization products. We also realize the equivalent of spectrally resolved transient-absorption measurements without the necessity for acquiring weak absorption changes. Using time-of-flight detection introduces cations as an observable, enabling the 2D spectroscopic study on isolated systems of photophysical and photochemical reactions.}, language = {en} } @article{BrixnerAeschlimannFischeretal.2013, author = {Brixner, T. and Aeschlimann, M. and Fischer, A. and Geisler, P. and Goetz, S. and Hecht, B. and Huang, J. S. and Keitzl, T. and Kramer, C. and Melchior, P. and Pfeiffer, W. and Razinskas, G. and Rewitz, C. and Schneider, C. and Str{\"u}ber, C. and Tuchscherer, P. and Voronine, D. V.}, title = {Coherent spectroscopies on ultrashort time and length scales}, series = {EPJ Web of Conferences}, volume = {41}, journal = {EPJ Web of Conferences}, doi = {10.1051/epjconf/20134109017}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-129073}, pages = {09017}, year = {2013}, abstract = {Three spectroscopic techniques are presented that provide simultaneous spatial and temporal resolution: modified confocal microscopy with heterodyne detection, space-time-resolved spectroscopy using coherent control concepts, and coherent two-dimensional nano-spectroscopy. Latest experimental results are discussed.}, language = {en} }