@phdthesis{Blumenstein2012, author = {Blumenstein, Christian}, title = {One-Dimensional Electron Liquid at a Surface: Gold Nanowires on Ge(001)}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-72801}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2012}, abstract = {Selbstorganisierte Nanodr{\"a}hte auf Halbleiteroberfl{\"a}chen erm{\"o}glichen die Untersuchung von Elektronen in niedrigen Dimensionen. Interessanterweise werden die elektronischen Eigenschaften des Systems von dessen Dimensionalit{\"a}t bestimmt, und das noch {\"u}ber das Quasiteilchenbild hinaus. Das quasi-eindimensionale (1D) Regime zeichnet sich durch eine schwache laterale Kopplung zwischen den Ketten aus und erm{\"o}glicht die Ausbildung einer Peierls Instabilit{\"a}t. Durch eine Nesting Bedingung in der Fermi Fl{\"a}che kommt es zu einer Bandr{\"u}ckfaltung und damit zu einem isolierenden Grundzustand. Dies wird begleitet von einer neuen {\"U}berstruktur im Realraum, die mit dem Nestingvektor korrespondiert. In fr{\"u}heren Nanodrahtsystemen wurde ein solcher Effekt gezeigt. Dazu geh ̈oren Indium Ketten auf Si(111) und die Gold rekonstruierten Substrate Si(553) und Si(557). Die Theorie sagt jedoch einen weiteren Zustand voraus, der nur im perfekten 1D Grenzfall existiert und der bei geringster Kopplung mit h{\"o}heren Dimensionen zerst{\"o}rt wird. Dieser Zustand wird Tomonaga-Luttinger Fl{\"u}ssigkeit (TLL) genannt und f{\"u}hrt zu einem Zusammenbruch des Quasiteilchenbildes der Fermi-Fl{\"u}ssigkeit. Hier sind nur noch kollektive Anregungen der Elektronen erlaubt, da die starke laterale Einschr{\"a}nkung zu einer erh{\"o}hten Kopplung zwischen den Teilchen f{\"u}hrt. Dadurch treten interessante Effekte wie Spin-Ladungs-Trennung auf, bei dem sich die Ladung und der Spin eines Elektrons entkoppeln und getrennt voneinander durch den Nanodraht bewegen k{\"o}nnen. Bis heute wurde solch ein seltener Zustand noch nicht an einer Oberfl{\"a}che beobachtet. In dieser Arbeit wird ein neuer Ansatz zur Herstellung von besser definierten 1D Ketten gew{\"a}hlt. Dazu wird die Au-rekonstruierte Ge(001) Nanodraht-Oberfl{\"a}che untersucht. F{\"u}r die Pr{\"a}paration des Substrates wird ein neues Rezept entwickelt, welches eine langreichweitig geordnete Oberfl{\"a}che erzeugt. Um das Wachstum der Nanodr{\"a}hte zu optimieren wird das Wachstums-Phasendiagramm ausgiebig untersucht. Außerdem werden die strukturellen Bausteine der Ketten sehr genau beschrieben. Es ist bemerkenswert, dass ein struktureller Phasen{\"u}bergang der Ketten oberhalb von Raumtemperatur gefunden wird. Aufgrund von spektroskopischen Untersuchungen kann eine Peierls Instabilit{\"a}t als Ursache ausgeschlossen werden. Es handelt sich um einen 3D-Ising-Typ {\"U}bergang an dem das Substrat ebenfalls beteiligt ist. Die Untersuchungen zur elektronischen Struktur der Ketten zeigen zwei deutliche Erkennungsmerkmale einer TLL: Ein potenzgesetzartiger Verlauf der Zustandsdichte und universales Skalenverhalten. Daher wird zum ersten Mal eine TLL an einer Oberfl{\"a}che nachgewiesen, was nun gezielt lokale Untersuchungen und Manipulationen erm{\"o}glicht. Dazu geh{\"o}ren (i) Dotierung mit Alkalimetallen, (ii) die Untersuchung von Kettenenden und (iii) die einstellbare Kopplung zwischen den Ketten durch zus{\"a}tzliche Goldatome. Damit wird ein wichtiger Beitrag zu theoretischen Vorhersagen und Modellen geliefert und somit das Verst{\"a}ndnis korrelierter Elektronen vorangetrieben.}, subject = {Nanodraht}, language = {en} } @phdthesis{Kriegisch2005, author = {Kriegisch, Volker}, title = {Electron transfer processes between organic redox centres and electrodes via active bridges in self-assembled monolayers}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15892}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2005}, abstract = {Cyclovoltammetrische Messungen der Ferrocenalkylthiole 1 - 3 belegen, dass homogene, gemischte Monolagen aus redoxaktiven Verbindungen und redoxinaktiven Alkylthiolen gebildet werden. Die von Creager et al. bestimmten ET Raten der Ferrocenalkylthiole 1 - 3 konnten hierbei verifiziert werden. Wie erwartet erfolgt eine Abnahme der ET Geschwindigkeit bei einer Kettenverl{\"a}ngerung des Alkylspacers von 2 nach 3. Eine unterschiedliche Konnektivit{\"a}t zwischen Redoxzentrum und Alkylspacer, z. B. die Einf{\"u}hrung einer Carbonyl-Funktion im Falle von 1, unter Beibehaltung der Kettenl{\"a}nge zeigt keinen bemerkbaren Einfluß auf den ET. Trotzt vergleichbaren Abstands der aromatischen Ferrocenthiole 4 und 5 zu der C8-Alkyl-Verbindung 2 zwischen Redoxzentrum und Elektrode, weisen diese aufgrund ihrer starken Konjugation sehr hohe ET Geschwindigkeiten auf. Die elektronischen Kopplungsfaktoren selbst deuten auf einen nichtadiabtischen ET zwischen Redoxzentrum und Elektrode hin. Wie erwartet kommt es zu einem Anwachsen der Kopplungsfaktoren bei sich verk{\"u}rzender Kettenl{\"a}nge oder bei Einf{\"u}hrung konjugierter Spacersysteme. Zusammenfassend kann gesagt werden, dass Erfahrungen hinsichtlich der Pr{\"a}paration der Monolagen gesammelt, die gemessenen ET Raten f{\"u}r der literaturbekannten Verbindungen 1 - 3 best{\"a}tigt und diese Informationen auf die konjugierten Verbindungen 4 und 5 angewandt werden konnten. Im zweiten Teil wurden die Triarylamin- (29, 32) und Phenothiazinalkylthiole (35) bez{\"u}glich ihres ET Verhaltens in gemischten Monolagen untersucht. Mittels Cyclovoltammetrie konnte gezeigt werden, daß einheitlich geformte, verd{\"u}nnte Monolagen vorliegen. Die ET Raten der Triarylamin- (29, 32) und Phenithiazinalkylthiole (35) sind jedoch um den Faktor 10 bis 100 h{\"o}her als vergleichbare Ferrocenalkylthiole gleicher Kettenl{\"a}nge [1, 2], wohingegen f{\"u}r Monolagen, welche [Ru(bpy)2(pp)]+-Alkythiole enthalten, {\"a}quivalente Werte gefunden wurden [3]. Die ET Geschwindigkeit wird von zwei Parametern beeinflusst: dem elektronischen Kopplungsmatrixelement und der Regorganisationsenergie \&\#61548;\&\#61472; [4]. Die ET Geschwindigkeit in Donor-substituierten Alkylthiolen wird haupts{\"a}chlich durch \&\#61548; beeinflusst und sogar kleine {\"A}nderungen dieser zeigen eine große Auswirkung auf die zu untersuchenden Prozesse. Aus diesem Grund wird eine Zunahme der ET Geschwindigkeit von Ferrocen (hohe Reorganisationsenergie) {\"u}ber die Phenothiazinverbindung 35 und [Ru(bpy)2(pp)]+ zu den Triarylaminchromophoren 29 und 32 (niedrige Reorganisationsenergie) beobachtet. Weiterhin spielt, im Gegensatz zu Beobachtung von Creager et al. an {\"a}quivalenten Ferrocenverbingungen, die Anbindung des Redoxzentrums an den Alkylspacer eine bedeutende Rolle. Im Falle der elektronenreichen Ether-verbr{\"u}ckten Verbindung 29 wird der ET nicht alleine durch \&\#61548;, sondern ebenso durch mesomere Effekte bestimmt. Bei 29 kommt es durch Lokalisation der positiven Ladung nahe der Ether Funktion formal zu einer Kettenverk{\"u}rzung um eine „Methyleneinheit", welche schließlich in h{\"o}heren ET Geschwindigkeiten resultiert. Im dritten Teil dieser Dissertation wurde ein Serie „molekularer Dr{\"a}hte" bestehend aus Methoxy- oder Chlorid-substituierten Triarylamin- und Phenothiazinverbindungen mit unterschiedlichen Br{\"u}ckeneinheiten und Br{\"u}ckenl{\"a}ngen zwischen Redoxzentrum und Ankerfunktion dargestellt und im Hinblick auf ihr ET Verhalten untersucht. Durch cyclovoltammetrische und UV/Vis-spektroskopische Untersuchungen konnte gezeigt werden, dass sowohl die Oxidationspotentiale als auch die energetischen Zust{\"a}nde der Chromophore recht gut durch Einf{\"u}hrung unterschiedlicher Redoxzentren und Br{\"u}ckeneinheiten beeinflusst werden k{\"o}nnen. Trotz erfolgreicher Kontrolle der Dichte der Chromophoreinheiten in den gemischten Monolagen konnte nur f{\"u}r die Verbindungen 49, 52 und 87 mit Nitril-substituierten Br{\"u}ckeneinheiten verl{\"a}ssliche ET Geschwindigkeiten erhalten werden. Bei diesen Chromphoren ist ein Absinken der ET Geschwindigkeit bei zunehmender Dichte der redoxaktiven Molek{\"u}le in den gemischten Monolagen zu beobachten, welche auf eine {\"A}nderung der Adsorptionsgeometrie hindeutet. Bei zunehmender Packungsdichte der Chromophore f{\"u}hrt dies zu einer aufrechteren Stellung der redoxaktiven Spezies. F{\"u}r alle anderen Verbindungen konnten keine Werte aufgrund der zu schnellen ET Geschwindigkeiten ermittelt werden. Konformelle, wie auch die sehr geringe Abstandsabh{\"a}ngigkeit des ET, resultieren in hohen ET Geschwindigkeiten oder auch ung{\"u}nstige HOMO-LUMO Energien bez{\"u}glich des Donors, der Br{\"u}cke und der Elektrode sind Gr{\"u}nde f{\"u}r dieses Verhalten. Die Tatsache, dass Verbindung 49 und 52 beinahe die gleichen Geschwindigkeitskonstanten des ETs unabh{\"a}ngig von der Anzahl der Br{\"u}ckeneinheiten (n = 2, n = 3) besitzen, deutet darauf hin, dass ein Hopping-Prozess stattfindet, bei welchem eine geringere L{\"a}ngenabh{\"a}ngigkeit des ETs als bei eine Superexchange-Mechanismus zu erwarten ist.}, subject = {Monoschicht}, language = {en} } @phdthesis{Meyer2013, author = {Meyer, Sebastian}, title = {Model System for Correlation Phenomena in Reduced Dimensions - Gold-induced Atomic Chains on Germanium}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-77723}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2013}, abstract = {Atomic chains, often called nanowires, form in a self-organized process after the adsorption of metal atoms. These wires are spatially well confined representing a close approach of a true one-dimensional structure. The low-dimensional architecture thereby often leads to anisotropic electronic states with vanishing interchain interaction. In the presence of weak coupling to the substrate a one-dimensional metal can experience a phase transition according to Peierls into an insulating ground state upon temperature, which is accompanied by a periodic lattice distortion. Without any coupling a strict onedimensional regime is reached, where the common Fermi liquid description breaks down with the quasi-particles being replaced by collective excitations of spin and charge. This state is referred to as a Tomonaga-Luttinger liquid (TLL), which has been observed so far only in anisotropic bulk materials. An experimental fingerprint for both phenomena can be obtained from the electronic states close to the chemical potential, i.e. the Fermi energy. Using a semiconducting substrate provides the best observation conditions since any bulk projection onto the interesting bands is avoided. In case of Au/Ge(001) the growth of gold-induced chains is guided by the dimerized bare Ge (2×1) reconstruction yielding two different domains of wires rotated by 90° going from one terrace to the next by a single height step. The superior wetting capabilities of gold on germanium enables a complete coverage of the Ge(001) surface with longrange ordered wires. Their length scale and defect density is limited by the underlying substrate, for which a cleaning procedure is introduced based on wet-chemical etching followed by thermal dry oxidation. The band structure of Au/Ge(001) is investigated by angle-resolved photoelectron spectroscopy as a function of temperature. Two states are observed: a two-dimensional metallic state with hole-like dispersion and a one-dimensional electron pocket, whose band-integrated spectral function does not show the typical Fermi distribution at the chemical potential. Instead, a decrease of spectral weight applies following a power-law. This behavior can be well explained within the Tomonaga-Luttinger liquid theory which replaces the Fermi-Landau formalism in strictly one-dimensional systems. To enable theoretical modeling, a structural analysis was performed on the basis of surface x-ray diffraction (SXRD). From the in-plane scattering data a Patterson-map could be extracted leading to in-plane distances between gold atoms in the unit cell. This provides the first step towards a complete structural model and therefore towards a band structure calculation. First successful attempts have been made to manipulate the system by controlled adsorption of potassium. Here, an n-type doping effect is observed for submonolayer coverage whereas slightly increased coverages in combination with thermal energy lead to a new surface reconstruction.}, subject = {Nanodraht}, language = {en} } @phdthesis{Mueller2011, author = {M{\"u}ller, Christian}, title = {Physical Properties of Chromophore Functionalized Gold Nanoparticles}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-57657}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2011}, abstract = {n this work the synthesis and analysis of chromophore functionalized spherical gold nanoparticles is presented. The optical, electrochemical and spectroelectrochemical properties of these hybrid materials are furthermore studied. The work therefore is divided into two parts. The first part deals with triarylamine and PCTM-radical functionalized gold nanoparticles. The focus thereby was on the synthesis and on the investigations of chromophore-chromophore interactions and gold core-chromophore interactions. The chromopores, especially triarylamines, were attached to the gold core via different bridging units and were studied with optical and electrochemical methods. The purity and dimensions of the nanoparticles was determined by 1H-NMR spectroscopy, diffusion ordered NMR spectroscopy (DOSY), TGA, XPS and STEM. Furthermore a cyclic voltammetry technique was used to determine the composition of the particles via the Randles-Sevcik equation. An analysis of these parameters led to a model of a sea urchin-shaped nanoparticle. Optical measurements of the particles revealed an anisotropic absorption behavior of the triarylamine units due to gold core-chromophore interaction. However this behavior depends strongly on the relative orientation of the transition dipole moment of the chromophore to the gold surface and the distance of the chromophore to the surface. Hence, the anisotropic behavior was exclusively detected in the spectra of the Au-Tara1 particles. The short and rigid pi-conjugated bridging unit thereby facilitates this gold core-chromophore interaction. It was shown from electrochemical investigations that the triarylamine units can be chemically reversibly oxidized to the triarylamine monoradical cation. Furthermore, the measurements revealed a strong interligand triarylamine-triarylamine interaction which was only seen for the Au-Tara1 particles. The long pi-conjugated bridging units of the Au-Tara2 and Au-Tara3 particles as well as the aliphatic bridging unit of Au-Tara4 prevent any detectable interligand interactions. One may conclude that both the gold core-chromophore and the interligand triarylamine-triarylamine interaction depend on the length and the rigidity of the bridging unit. The electron transfer behavior of the triarylamine units adsorbed onto the gold core was additionally studied via spectroelectrochemical (SEC) measurements which are able to reveal weaker interactions. The investigations of Au-Tara1 and Au-Tara2 revealed a significant strong coupling between neighboring triarylamine units which is due to through-space intervalence interactions. This behavior was not detected for Au-Tara3 or for Au-Tara4. The SEC analysis also revealed that these observed interligand interactions depend on the length and the rigidity of the bridging unit. Thus, the systematic variation of the bridging unit gave a basic insight in the optical and electrochemical properties of triarylamines, located in the vicinity of a gold nanoparticle. The second part of this work aimed at the synthesis of new molecules, denoted as SERS-markers, for immuno SERS applications. For this purpose, the SERS-markers were designed to have a Raman-active unit and a thiol group for chemisorptions to Au/Ag nanoshells. In cooperation with the group of Schl{\"u}cker (University of Osnabr{\"u}ck) the SERS-markers were absorbed onto Au/Ag nanoshells, denoted as SERS-labels, and characterized. The SERS spectra of the SERS-labels exhibited intense and characteristic SERS-signals for each marker. For immuno SERS investigations SEMA3 was functionalized with a hydrophilic end unit. This marker was adsorbed onto an Au/Ag nanoshell and encapsulated with silica. An anti-p63 antibody was bound to the silica surface in order to generate a SERS-labeled antibody for the detection of the tumor suppressor p63 in benign prostate. Immuno-SERS imaging of prostate tissue incubated with SERS-labeled anti-p63 antibodies demonstrated the selective detection of p63 in the basal epithelium. The results show the potential of the method for the detection of several biomolecules in a multiplexing SERS experiment.}, subject = {Gold}, language = {en} } @phdthesis{Nwaila2017, author = {Nwaila, Tsundukani Glen}, title = {Geochemistry of Palaeoarchaean to Palaeoproterozoic Kaapvaal Craton marine shales: Implications for sediment provenance and siderophile elements endowment}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155326}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2017}, abstract = {The Kaapvaal Craton hosts a number of large gold deposits (e.g. Witwatersrand Supergroup) which mining companies have exploited at certain stratigraphic positions. It also hosts the largest platinum group element (PGE) deposits (e.g. Bushveld Igneous Complex) which mining companies have exploited in different mineralised layered magmatic zones. In spite of the extensive exploration history in the Kaapvaal Craton, the origin of the Witwatersrand gold deposits and Bushveld Igneous Complex PGE deposits has remained one of the most debated topics in economic geology. The goal of this study was to identify the geochemical characteristics of marine shales in the Barberton, Witwatersrand, and Transvaal supergroups in South Africa in order to make inferences on their sediment provenance and siderophile element endowments. Understanding why some of the Archaean and Proterozoic hinterlands are heavily mineralised, compared to others with similar geological characteristics, will aid in the development of more efficient exploration models. Fresh, unmineralised marine shales from the Barberton (Fig Tree and Moodies groups), Witwatersrand (West Rand and Central Rand groups), and Transvaal (Black Reef Formation and Pretoria Group) supergroups were sampled from drill core and underground mining exposures. Analytical methods, such as X-ray powder diffraction (XRD), optical microscopy, X-ray fluorescence (XRF), inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), and electron microprobe analysis (EMPA) were applied to comprehensively characterise the shales. All of the Au and PGE assays examined the newly collected shale samples. The Barberton Supergroup shales consist mainly of quartz, illite, chlorite, and albite, with diverse heavy minerals, including sulfides and oxides, representing the minor constituents. The regionally persistent Witwatersrand Supergroup shales consist mainly of quartz, muscovite, and chlorite, and also contain minor constituents of sulfides and oxides. The Transvaal Supergroup shales comprise quartz, chlorite, and carbonaceous material. Major, trace (including rare-earth element) concentrations were determined for shales from the above supergroups to constrain their source and post-depositional evolution. Chemical variations were observed in all the studied marine shales. Results obtained from this study revealed that post-depositional modification of shale chemistry was significant only near contacts with over- and underlying coarser-grained siliciclastic rocks and along cross-cutting faults, veins, and dykes. Away from such zones, the shale composition remained largely unaltered and can be used to draw inferences concerning sediment provenance and palaeoweathering in the source region and/or on intrabasinal erosion surfaces. Evaluation of weathering profiles through sections of the studied supergroups revealed that the shales therein are characterised by high chemical index of alteration (CIA), chemical index of weathering (CIW), and index of compositional variability (ICV), suggesting that the source area was lithologically complex and subject to intense chemical weathering. A progressive change in the chemical composition was identified, from a dominant ultramafic-mafic source for the Fig Tree Group to a progressively felsic-plutonic provenance for the Moodies Group. The West Rand Group of the Witwatersrand Supergroup shows a dominance of tonalite-trondhjemite-granodiorite and calcalkaline granite sources. Compositional profiles through the only major marine shale unit within the Central Rand Group indicate the progressive unroofing of a granitic source in an otherwise greenstone-dominated hinterland during the course of sedimentation. No plausible likely tectonic setting was obtained through geochemical modelling. However, the combination of the systematic shale chemistry, geochronology, and sedimentology in the Witwatersrand Supergroup supports the hypothesised passive margin setting for the >2.98 to 2.91 Ga West Rand Group, and an active continental margin source for the overlying >2.90 to 2.78 Ga Central Rand Group, along with a foreland basin setting for the latter. Ultra-low detection limit analyses of gold and PGE concentrations revealed a variable degree of gold accumulation within pristine unmineralised shales. All the studied shales contain elevated gold and PGE contents relative to the upper continental crust, with marine shales from the Central Rand Group showing the highest Au (±9.85 ppb) enrichment. Based on this variation in the provenance of contemporaneous sediments in different parts of the Kaapvaal Craton, one can infer that the siderophile elements were sourced from a fertile hinterland, but concentrated into the marine shales by a combination of different processes. It is proposed that accumulation of siderophile elements in the studied marine shales was mainly controlled by mechanical coagulation and aggregation. These processes involved suspended sediments, fine gold particles, and other trace elements being trapped in marine environments. Mechanical coagulation and aggregation resulted in gold enrichments by 2-3 orders of magnitude, whereas some of the gold in these marine shales can be reconciled by seawater adsorption into sedimentary pyrite. For the source of gold and PGEs in the studied marine shales in the Kaapvaal Craton, a genetic model is proposed that involves the following: (1) A highly siderophile elements enriched upper mantle domain, herein referred to as "geochemically anomalous mantle domain", from which the Kaapvaal crust was sourced. This mantle domain enriched in highly siderophile elements was formed either by inhomogeneous mixing with cosmic material that was added during intense meteorite bombardment of the Hadaean to Palaeoarchaean Earth or by plume-like ascent of relics from the core-mantle boundary. In both cases, elevated siderophile elements concentrations would be expected. The geochemically anomalous mantle domain is likely the ultimate source of the Witwatersrand modified palaeoplacer gold deposits and was tapped again ca. 2.054 Ga during the emplacement of the Bushveld Igneous Complex. Therefore, I propose that there is a genetic link (i.e. common geochemically anomalous mantle source) between the Witwatersrand gold deposits and the younger Bushveld Igneous Complex PGE deposits. (2) Scavenging of crustal gold by various surface processes such as trapping of gold from Archaean/Palaeoproterozoic river water on the surface of local photosynthesizing cyanobacterial or microbial mats, and reworking of these mats into erosion channels during flooding events. The above two models complement each other, with model (1) providing a common geological source for the Witwatersrand gold and Bushveld Igneous Complex PGE deposits, and model (2) explaining the processes responsible for Witwatersrand-type gold pre-concentration processes. In sequences such as the Transvaal Supergroup, a less fertile hinterland and/or less reworking of older sediments led to a correspondingly lower gold endowment. These findings indicate temporal distribution of siderophile elements in the upper crust (e.g. marine shales). The overall implications of these findings are that background concentrations of gold and PGEs can be used to target potential exploration areas in other cratons of similar age. This increases the likelihood of finding other Witwatersrand-type gold or Bushveld Igneous Complex-type PGE deposits in other cratons.}, subject = {Gold}, language = {en} }