@article{TonyBurmesterSchulzeKoopsetal.2011, author = {Tony, Hans-Peter and Burmester, Gerd and Schulze-Koops, Hendrik and Grunke, Mathias and Henes, Joerg and K{\"o}tter, Ina and Haas, Judith and Unger, Leonore and Lovric, Svjetlana and Haubitz, Marion and Fischer-Betz, Rebecca and Chehab, Gamal and Rubbert-Roth, Andrea and Specker, Christof and Weinerth, Jutta and Holle, Julia and M{\"u}ller-Ladner, Ulf and K{\"o}nig, Ramona and Fiehn, Christoph and Burgwinkel, Philip and Budde, Klemens and S{\"o}rensen, Helmut and Meurer, Michael and Aringer, Martin and Kieseier, Bernd and Erfurt-Berge, Cornelia and Sticherling, Michael and Veelken, Roland and Ziemann, Ulf and Strutz, Frank and von Wussow, Praxis and Meier, Florian MP and Hunzelmann, Nico and Schmidt, Enno and Bergner, Raoul and Schwarting, Andreas and Eming, R{\"u}diger and Schwarz-Eywill, Michael and Wassenberg, Siegfried and Fleck, Martin and Metzler, Claudia and Zettl, Uwe and Westphal, Jens and Heitmann, Stefan and Herzog, Anna L. and Wiendl, Heinz and Jakob, Waltraud and Schmidt, Elvira and Freivogel, Klaus and D{\"o}rner, Thomas and Hertl, Michael and Stadler, Rudolf}, title = {Safety and clinical outcomes of rituximab therapy in patients with different autoimmune diseases: experience from a national registry (GRAID)}, series = {Arthritis Research \& Therapy}, volume = {13}, journal = {Arthritis Research \& Therapy}, number = {R75}, doi = {10.1186/ar3337}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-142856}, pages = {1-14}, year = {2011}, abstract = {Introduction: Evidence from a number of open-label, uncontrolled studies has suggested that rituximab may benefit patients with autoimmune diseases who are refractory to standard-of-care. The objective of this study was to evaluate the safety and clinical outcomes of rituximab in several standard-of-care-refractory autoimmune diseases (within rheumatology, nephrology, dermatology and neurology) other than rheumatoid arthritis or non-Hodgkin's lymphoma in a real-life clinical setting. Methods: Patients who received rituximab having shown an inadequate response to standard-of-care had their safety and clinical outcomes data retrospectively analysed as part of the German Registry of Autoimmune Diseases. The main outcome measures were safety and clinical response, as judged at the discretion of the investigators. Results: A total of 370 patients (299 patient-years) with various autoimmune diseases (23.0\% with systemic lupus erythematosus, 15.7\% antineutrophil cytoplasmic antibody-associated granulomatous vasculitides, 15.1\% multiple sclerosis and 10.0\% pemphigus) from 42 centres received a mean dose of 2,440 mg of rituximab over a median (range) of 194 (180 to 1,407) days. The overall rate of serious infections was 5.3 per 100 patient-years during rituximab therapy. Opportunistic infections were infrequent across the whole study population, and mostly occurred in patients with systemic lupus erythematosus. There were 11 deaths (3.0\% of patients) after rituximab treatment (mean 11.6 months after first infusion, range 0.8 to 31.3 months), with most of the deaths caused by infections. Overall (n = 293), 13.3\% of patients showed no response, 45.1\% showed a partial response and 41.6\% showed a complete response. Responses were also reflected by reduced use of glucocorticoids and various immunosuppressives during rituximab therapy and follow-up compared with before rituximab. Rituximab generally had a positive effect on patient well-being (physician's visual analogue scale; mean improvement from baseline of 12.1 mm)}, language = {en} } @article{StengelVuralBrunderetal.2019, author = {Stengel, Helena and Vural, Atay and Brunder, Anna-Michelle and Heinius, Annika and Appeltshauser, Luise and Fiebig, Bianca and Giese, Florian and Dresel, Christian and Papagianni, Aikaterini and Birklein, Frank and Weis, Joachim and Huchtemann, Tessa and Schmidt, Christian and K{\"o}rtvelyessy, Peter and Villmann, Carmen and Meinl, Edgar and Sommer, Claudia and Leypoldt, Frank and Doppler, Kathrin}, title = {Anti-pan-neurofascin IgG3 as a marker of fulminant autoimmune neuropathy}, series = {Neurology: Neuroimmunology \& Neuroinflammation}, volume = {6}, journal = {Neurology: Neuroimmunology \& Neuroinflammation}, number = {5}, doi = {10.1212/NXI.0000000000000603}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-202462}, year = {2019}, abstract = {Objective To identify and characterize patients with autoantibodies against different neurofascin (NF) isoforms. Methods Screening of a large cohort of patient sera for anti-NF autoantibodies by ELISA and further characterization by cell-based assays, epitope mapping, and complement binding assays. Results Two different clinical phenotypes became apparent in this study: The well-known clinical picture of subacute-onset severe sensorimotor neuropathy with tremor that is known to be associated with IgG4 autoantibodies against the paranodal isoform NF-155 was found in 2 patients. The second phenotype with a dramatic course of disease with tetraplegia and almost locked-in syndrome was associated with IgG3 autoantibodies against nodal and paranodal isoforms of NF in 3 patients. The epitope against which these autoantibodies were directed in this second phenotype was the common Ig domain found in all 3 NF isoforms. In contrast, anti-NF-155 IgG4 were directed against the NF-155-specific Fn3Fn4 domain. The description of a second phenotype of anti-NF-associated neuropathy is in line with some case reports of similar patients that were published in the last year. Conclusions Our results indicate that anti-pan-NF-associated neuropathy differs from anti-NF-155-associated neuropathy, and epitope and subclass play a major role in the pathogenesis and severity of anti-NF-associated neuropathy and should be determined to correctly classify patients, also in respect to possible differences in therapeutic response.}, language = {en} } @article{MezaChinchaLindnerSchindleretal.2020, author = {Meza-Chincha, Ana-Lucia and Lindner, Joachim O. and Schindler, Dorothee and Schmidt, David and Krause, Ana-Maria and R{\"o}hr, Merle I. S. and Mitrić, Roland and W{\"u}rthner, Frank}, title = {Impact of substituents on molecular properties and catalytic activities of trinuclear Ru macrocycles in water oxidation}, issn = {2041-6539}, doi = {10.1039/d0sc01097a}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204653}, year = {2020}, abstract = {Herein we report a broad series of new trinuclear supramolecular Ru(bda) macrocycles bearing different substituents at the axial or equatorial ligands which enabled investigation of substituent effects on the catalytic activities in chemical and photocatalytic water oxidation. Our detailed investigations revealed that the activities of these functionalized macrocycles in water oxidation are significantly affected by the position at which the substituents were introduced. Interestingly, this effect could not be explained based on the redox properties of the catalysts since these are not markedly influenced by the functionalization of the ligands. Instead, detailed investigations by X-ray crystal structure analysis and theoretical simulations showed that conformational changes imparted by the substituents are responsible for the variation of catalytic activities of the Ru macrocycles. For the first time, macrocyclic structure of this class of water oxidation catalysts is unequivocally confirmed and experimental indication for a hydrogen-bonded water network present in the cavity of the macrocycles is provided by crystal structure analysis. We ascribe the high catalytic efficiency of our Ru(bda) macrocycles to cooperative proton abstractions facilitated by such a network of preorganized water molecules in their cavity, which is reminiscent of catalytic activities of enzymes at active sites.}, language = {en} } @article{HocheSchulzDietrichetal.2019, author = {Hoche, Joscha and Schulz, Alexander and Dietrich, Lysanne Monika and Humeniuk, Alexander and Stolte, Matthias and Schmidt, David and Brixner, Tobias and W{\"u}rthner, Frank and Mitric, Roland}, title = {The origin of the solvent dependence of fluorescence quantum yields in dipolar merocyanine dyes}, series = {Chemical Science}, volume = {10}, journal = {Chemical Science}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-198707}, pages = {11013}, year = {2019}, abstract = {Fluorophores with high quantum yields are desired for a variety of applications. Optimization of promising chromophores requires an understanding of the non-radiative decay channels that compete with the emission of photons. We synthesized a new derivative of the famous laser dye 4-dicyanomethylen-2-methyl-6-p-dimethylaminostyryl-4H-pyran (DCM),i.e., merocyanine 4-(dicyanomethylene)-2-tert-butyl-6-[3-(3-butyl-benzothiazol-2-ylidene)1-propenyl]-4H-pyran (DCBT). We measured fluorescence lifetimes and quantum yields in a variety of solvents and found a trend opposite to the energy gap law.This motivated a theoretical investigation into the possible non-radiative decay channels. We propose that a barrier to a conical intersection exists that is very sensitive to the solvent polarity. The conical intersection is characterized by a twisted geometry which allows a subsequent photoisomerization. Transient absorption measurements confirmed the formation of a photoisomer in unpolar solvents, while the measurements of fluorescence quantum yields at low temperature demonstrated the existence of an activation energy barrier.}, language = {en} } @article{FarrellGrandeSchmidtetal.2019, author = {Farrell, Jeffrey M. and Grande, Vincenzo and Schmidt, David and W{\"u}rthner, Frank}, title = {A Highly Warped Heptagon-Containing sp\(^2\) Carbon Scaffold via Vinylnaphthyl π-Extension}, series = {Angewandte Chemie International Edition}, volume = {58}, journal = {Angewandte Chemie International Edition}, number = {46}, doi = {10.1002/anie.201909975}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-206682}, pages = {16504-16507}, year = {2019}, abstract = {A new strategy is demonstrated for the synthesis of warped, negatively curved, all-sp\(^2\)-carbon π-scaffolds. Multifold C-C coupling reactions are used to transform a polyaromatic borinic acid into a saddle-shaped polyaromatic hydrocarbon (2 ) bearing two heptagonal rings. Notably, this Schwarzite substructure is synthesized in only two steps from an unfunctionalized alkene. A highly warped structure of 2 was revealed by X-ray crystallographic studies and pronounced flexibility of this π-scaffold was ascertained by experimental and computational studies. Compound 2 exhibits excellent solubility, visible range absorption and fluorescence, and readily undergoes two reversible one-electron oxidations at mild potentials.}, language = {en} } @article{BialasZitzlerKunkelKirchneretal.2016, author = {Bialas, David and Zitzler-Kunkel, Andr{\´e} and Kirchner, Eva and Schmidt, David and W{\"u}rthner, Frank}, title = {Structural and quantum chemical analysis of exciton coupling in homo- and heteroaggregate stacks of merocyanines}, series = {Nature Communications}, volume = {7}, journal = {Nature Communications}, doi = {10.1038/ncomms12949}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-170200}, year = {2016}, abstract = {Exciton coupling is of fundamental importance and determines functional properties of organic dyes in (opto-)electronic and photovoltaic devices. Here we show that strong exciton coupling is not limited to the situation of equal chromophores as often assumed. Quadruple dye stacks were obtained from two bis(merocyanine) dyes with same or different chromophores, respectively, which dimerize in less-polar solvents resulting in the respective homo- and heteroaggregates. The structures of the quadruple dye stacks were assigned by NMR techniques and unambiguously confirmed by single-crystal X-ray analysis. The heteroaggregate stack formed from the bis(merocyanine) bearing two different chromophores exhibits remarkably different ultraviolet/vis absorption bands compared with those of the homoaggregate of the bis(merocyanine) comprising two identical chromophores. Quantum chemical analysis based on an extension of Kasha's exciton theory appropriately describes the absorption properties of both types of stacks revealing strong exciton coupling also between different chromophores within the heteroaggregate.}, language = {en} } @article{WenNowakKrolNagleretal.2019, author = {Wen, Xinbo and Nowak-Kr{\´o}l, Agnieszka and Nagler, Oliver and Kraus, Felix and Zhu, Na and Zheng, Nan and M{\"u}ller, Matthias and Schmidt, David and Xie, Zengqi and W{\"u}rthner, Frank}, title = {Tetrahydroxy-perylene bisimide embedded in zinc oxide thin film as electron transporting layer for high performance non-fullerene organic solar cells}, series = {Angewandte Chemie International Edition}, volume = {58}, journal = {Angewandte Chemie International Edition}, number = {37}, doi = {10.1002/anie.201907467}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204723}, pages = {13051-13055}, year = {2019}, abstract = {By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO-PBI ligands were obtained which upon deprotonation can complex ZnII ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic-inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO:HO-PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non-fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 \% for a non-fullerene based organic solar cell.}, language = {en} } @article{KarakayaBiderFranketal.2022, author = {Karakaya, Emine and Bider, Faina and Frank, Andreas and Teßmar, J{\"o}rg and Sch{\"o}bel, Lisa and Forster, Leonard and Schr{\"u}fer, Stefan and Schmidt, Hans-Werner and Schubert, Dirk Wolfram and Blaeser, Andreas and Boccaccini, Aldo R. and Detsch, Rainer}, title = {Targeted printing of cells: evaluation of ADA-PEG bioinks for drop on demand approaches}, series = {Gels}, volume = {8}, journal = {Gels}, number = {4}, issn = {2310-2861}, doi = {10.3390/gels8040206}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-267317}, year = {2022}, abstract = {A novel approach, in the context of bioprinting, is the targeted printing of a defined number of cells at desired positions in predefined locations, which thereby opens up new perspectives for life science engineering. One major challenge in this application is to realize the targeted printing of cells onto a gel substrate with high cell survival rates in advanced bioinks. For this purpose, different alginate-dialdehyde—polyethylene glycol (ADA-PEG) inks with different PEG modifications and chain lengths (1-8 kDa) were characterized to evaluate their application as bioinks for drop on demand (DoD) printing. The biochemical properties of the inks, printing process, NIH/3T3 fibroblast cell distribution within a droplet and shear forces during printing were analyzed. Finally, different hydrogels were evaluated as a printing substrate. By analysing different PEG chain lengths with covalently crosslinked and non-crosslinked ADA-PEG inks, it was shown that the influence of Schiff's bases on the viscosity of the corresponding materials is very low. Furthermore, it was shown that longer polymer chains resulted in less stable hydrogels, leading to fast degradation rates. Several bioinks highly exhibit biocompatibility, while the calculated nozzle shear stress increased from approx. 1.3 and 2.3 kPa. Moreover, we determined the number of cells for printed droplets depending on the initial cell concentration, which is crucially needed for targeted cell printing approaches.}, language = {en} } @article{MechauFrankBakircietal.2021, author = {Mechau, Jannik and Frank, Andreas and Bakirci, Ezgi and Gumbel, Simon and Jungst, Tomasz and Giesa, Reiner and Groll, J{\"u}rgen and Dalton, Paul D. and Schmidt, Hans-Werner}, title = {Hydrophilic (AB)\(_{n}\) Segmented Copolymers for Melt Extrusion-Based Additive Manufacturing}, series = {Macromolecular Chemistry and Physics}, volume = {222}, journal = {Macromolecular Chemistry and Physics}, number = {1}, doi = {10.1002/macp.202000265}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-224513}, year = {2021}, abstract = {Several manufacturing technologies beneficially involve processing from the melt, including extrusion-based printing, electrospinning, and electrohydrodynamic jetting. In this study, (AB)\(_{n}\) segmented copolymers are tailored for melt-processing to form physically crosslinked hydrogels after swelling. The copolymers are composed of hydrophilic poly(ethylene glycol)-based segments and hydrophobic bisurea segments, which form physical crosslinks via hydrogen bonds. The degree of polymerization was adjusted to match the melt viscosity to the different melt-processing techniques. Using extrusion-based printing, a width of approximately 260 µm is printed into 3D constructs, with excellent interlayer bonding at fiber junctions, due to hydrogen bonding between the layers. For melt electrospinning, much thinner fibers in the range of about 1-15 µm are obtained and produced in a typical nonwoven morphology. With melt electrowriting, fibers are deposited in a controlled way to well-defined 3D constructs. In this case, multiple fiber layers fuse together enabling constructs with line width in the range of 70 to 160 µm. If exposed to water the printed constructs swell and form physically crosslinked hydrogels that slowly disintegrate, which is a feature for soluble inks within biofabrication strategies. In this context, cytotoxicity tests confirm the viability of cells and thus demonstrating biocompatibility of this class of copolymers.}, language = {en} } @article{SchmidtStolteSuessetal.2019, author = {Schmidt, David and Stolte, Matthias and S{\"u}ß, Jasmin and Liess, Dr. Andreas and Stepanenko, Vladimir and W{\"u}rthner, Frank}, title = {Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material}, series = {Angewandte Chemie International Edition}, volume = {58}, journal = {Angewandte Chemie International Edition}, number = {38}, doi = {10.1002/ange.201907618}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-204809}, pages = {13385-13389}, year = {2019}, abstract = {Strongly emissive solid-state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer-like absorption and emission profiles as well as fluorescence quantum yields over 90 \% in its crystalline solid state. The material was synthesized by attaching two bulky tris(4-tert-butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments.}, language = {en} }