@article{MotykaSękRyczkoetal.2015, author = {Motyka, Marcin and Sęk, Grzegorz and Ryczko, Krzysztof and Dyksik, Mateusz and Weih, Robert and Patriarche, Gilles and Misiewicz, Jan and Kamp, Martin and H{\"o}fling, Sven}, title = {Interface Intermixing in Type II InAs/GaInAsSb Quantum Wells Designed for Active Regions of Mid-Infrared-Emitting Interband Cascade Lasers}, series = {Nanoscale Research Letters}, volume = {10}, journal = {Nanoscale Research Letters}, number = {471}, doi = {10.1186/s11671-015-1183-x}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136386}, year = {2015}, abstract = {The effect of interface intermixing in W-design GaSb/AlSb/InAs/Ga\(_{0.665}\)In\(_{0.335}\)As\(_x\)Sb\(_{1-x}\)/InAs/AlSb/GaSb quantum wells (QWs) has been investigated by means of optical spectroscopy supported by structural data and by band structure calculations. The fundamental optical transition has been detected at room temperature through photoluminescence and photoreflectance measurements and appeared to be blueshifted with increasing As content of the GaInAsSb layer, in contrast to the energy-gap-driven shifts calculated for an ideally rectangular QW profile. The arsenic incorporation into the hole-confining layer affects the material and optical structure also altering the InAs/GaInAsSb interfaces and their degree of intermixing. Based on the analysis of cross-sectional transmission electron microscopy images and energy-dispersive X-ray spectroscopy, we could deduce the composition distribution across the QW layers and hence simulate more realistic confinement potential profiles. For such smoothed interfaces that indicate As-enhanced intermixing, the energy level calculations have been able to reproduce the experimentally obtained trend.}, language = {en} } @article{DyksikMotykaSęketal.2015, author = {Dyksik, Mateusz and Motyka, Marcin and Sęk, Grzegorz and Misiewicz, Jan and Dallner, Matthias and Weih, Robert and Kamp, Martin and H{\"o}fling, Sven}, title = {Submonolayer Uniformity of Type II InAs/GaInSb W-shaped Quantum Wells Probed by Full-Wafer Photoluminescence Mapping in the Mid-infrared Spectral Range}, series = {Nanoscale Research Letters}, volume = {10}, journal = {Nanoscale Research Letters}, number = {402}, doi = {10.1186/s11671-015-1104-z}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-139733}, year = {2015}, abstract = {The spatial uniformity of GaSb- and InAs substrate-based structures containing type II quantum wells was probed by means of large-scale photoluminescence (PL) mapping realized utilizing a Fourier transform infrared spectrometer. The active region was designed and grown in a form of a W-shaped structure with InAs and GaInSb layers for confinement of electrons and holes, respectively. The PL spectra were recorded over the entire 2-in. wafers, and the parameters extracted from each spectrum, such as PL peak energy position, its linewidth and integrated intensity, were collected in a form of two-dimensional spatial maps. Throughout the analysis of these maps, the wafers' homogeneity and precision of the growth procedure were investigated. A very small variation of PL peak energy over the wafer indicates InAs quantum well width fluctuation of only a fraction of a monolayer and hence extraordinary thickness accuracy, a conclusion further supported by high uniformity of both the emission intensity and PL linewidth.}, language = {en} } @article{WyborskiPodemskiWrońskietal.2022, author = {Wyborski, Paweł and Podemski, Paweł and Wroński, Piotr Andrzej and Jabeen, Fauzia and H{\"o}fling, Sven and Sęk, Grzegorz}, title = {Electronic and optical properties of InAs QDs grown by MBE on InGaAs metamorphic buffer}, series = {Materials}, volume = {15}, journal = {Materials}, number = {3}, issn = {1996-1944}, doi = {10.3390/ma15031071}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-297037}, year = {2022}, abstract = {We present the optical characterization of GaAs-based InAs quantum dots (QDs) grown by molecular beam epitaxy on a digitally alloyed InGaAs metamorphic buffer layer (MBL) with gradual composition ensuring a redshift of the QD emission up to the second telecom window. Based on the photoluminescence (PL) measurements and numerical calculations, we analyzed the factors influencing the energies of optical transitions in QDs, among which the QD height seems to be dominating. In addition, polarization anisotropy of the QD emission was observed, which is a fingerprint of significant valence states mixing enhanced by the QD confinement potential asymmetry, driven by the decreased strain with increasing In content in the MBL. The barrier-related transitions were probed by photoreflectance, which combined with photoluminescence data and the PL temperature dependence, allowed for the determination of the carrier activation energies and the main channels of carrier loss, identified as the carrier escape to the MBL barrier. Eventually, the zero-dimensional character of the emission was confirmed by detecting the photoluminescence from single QDs with identified features of the confined neutral exciton and biexciton complexes via the excitation power and polarization dependences.}, language = {en} } @article{WyborskiMusiałMrowińskietal.2021, author = {Wyborski, Paweł and Musiał, Anna and Mrowiński, Paweł and Podemski, Paweł and Baumann, Vasilij and Wroński, Piotr and Jabeen, Fauzia and H{\"o}fling, Sven and Sęk, Grzegorz}, title = {InP-substrate-based quantum dashes on a DBR as single-photon emitters at the third telecommunication window}, series = {Materials}, volume = {14}, journal = {Materials}, number = {4}, issn = {1996-1944}, doi = {10.3390/ma14040759}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-228773}, year = {2021}, abstract = {We investigated emission properties of photonic structures with InAs/InGaAlAs/InP quantum dashes grown by molecular beam epitaxy on a distributed Bragg reflector. In high-spatial-resolution photoluminescence experiment, well-resolved sharp spectral lines are observed and single-photon emission is detected in the third telecommunication window characterized by very low multiphoton events probabilities. The photoluminescence spectra measured on simple photonic structures in the form of cylindrical mesas reveal significant intensity enhancement by a factor of 4 when compared to a planar sample. These results are supported by simulations of the electromagnetic field distribution, which show emission extraction efficiencies even above 18\% for optimized designs. When combined with relatively simple and undemanding fabrication approach, it makes this kind of structures competitive with the existing solutions in that spectral range and prospective in the context of efficient and practical single-photon sources for fiber-based quantum networks applications.}, language = {en} } @article{WrońskiWyborskiMusiałetal.2021, author = {Wroński, Piotr Andrzej and Wyborski, Paweł and Musiał, Anna and Podemski, Paweł and Sęk, Grzegorz and H{\"o}fling, Sven and Jabeen, Fauzia}, title = {Metamorphic Buffer Layer Platform for 1550 nm Single-Photon Sources Grown by MBE on (100) GaAs Substrate}, series = {Materials}, volume = {14}, journal = {Materials}, number = {18}, issn = {1996-1944}, doi = {10.3390/ma14185221}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-246145}, year = {2021}, abstract = {We demonstrate single-photon emission with a low probability of multiphoton events of 5\% in the C-band of telecommunication spectral range of standard silica fibers from molecular beam epitaxy grown (100)-GaAs-based structure with InAs quantum dots (QDs) on a metamorphic buffer layer. For this purpose, we propose and implement graded In content digitally alloyed InGaAs metamorphic buffer layer with maximal In content of 42\% and GaAs/AlAs distributed Bragg reflector underneath to enhance the extraction efficiency of QD emission. The fundamental limit of the emission rate for the investigated structures is 0.5 GHz based on an emission lifetime of 1.95 ns determined from time-resolved photoluminescence. We prove the relevance of a proposed technology platform for the realization of non-classical light sources in the context of fiber-based quantum communication applications.}, language = {en} }