@article{SinnEichlerMuelleretal.2011,
  author    = {Sinn, Stefan and Eichler, Mirjam and M{\"u}ller, Lothar and B{\"u}nger, Daniel and Groll, J{\"u}ergen and Ziemer, Gerhard and Rupp, Frank and Northoff, Hinnak and Geis-Gerstorfer, J{\"u}rgen and Gehring, Frank K. and Wendel, Hans P.},
  title     = {NCO-sP(EO-stat-PO) Coatings on Gold Sensors-a QCM Study of Hemocompatibility},
  series = {Sensors},
  volume    = {11},
  journal   = {Sensors},
  number    = {5},
  doi       = {10.3390/s110505253},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-141110},
  pages     = {5253-5269},
  year      = {2011},
  abstract  = {The reliability of implantable blood sensors is often hampered by unspecific adsorption of plasma proteins and blood cells. This not only leads to a loss of sensor signal over time, but can also result in undesired host vs. graft reactions. Within this study we evaluated the hemocompatibility of isocyanate conjugated star shaped polytheylene oxide-polypropylene oxide co-polymers NCO-sP(EO-stat-PO) when applied to gold surfaces as an auspicious coating material for gold sputtered blood contacting sensors. Quartz crystal microbalance (QCM) sensors were coated with ultrathin NCO-sP(EO-stat-PO) films and compared with uncoated gold sensors. Protein resistance was assessed by QCM measurements with fibrinogen solution and platelet poor plasma (PPP), followed by quantification of fibrinogen adsorption. Hemocompatibility was tested by incubation with human platelet rich plasma (PRP). Thrombin antithrombin-III complex (TAT), beta-thromboglobulin (beta-TG) and platelet factor 4 (PF4) were used as coagulation activation markers. Furthermore, scanning electron microscopy (SEM) was used to visualize platelet adhesion to the sensor surfaces. Compared to uncoated gold sensors, NCO-sP(EO-stat-PO) coated sensors revealed significant better resistance against protein adsorption, lower TAT generation and a lower amount of adherent platelets. Moreover, coating with ultrathin NCO-sP(EO-stat-PO) films creates a cell resistant hemocompatible surface on gold that increases the chance of prolonged sensor functionality and can easily be modified with specific receptor molecules.},
  language  = {en}
}
@article{FuchsYoussefSeheretal.2019,
  author    = {Fuchs, A. and Youssef, A. and Seher, A. and Hochleitner, G. and Dalton, P. D. and Hartmann, S. and Brands, R. C. and M{\"u}ller-Richter, U. D. A. and Linz, C,},
  title     = {Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration - a pilot study in vitro},
  series = {BMC Oral Health},
  volume    = {19},
  journal   = {BMC Oral Health},
  doi       = {10.1186/s12903-019-0717-5},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-200274},
  pages     = {28},
  year      = {2019},
  abstract  = {Background The spectrum of indications for the use of membranes and scaffolds in the field of oral and maxillofacial surgery includes, amongst others, guided bone regeneration (GBR). Currently available membrane systems face certain disadvantages such as difficult clinical handling, inconsistent degradation, undirected cell growth and a lack of stability that often complicate their application. Therefore, new membranes which can overcome these issues are of great interest in this field. Methods In this pilot study, we investigated polycaprolactone (PCL) scaffolds intended to enhance oral wound healing by means of melt electrospinning writing (MEW), which allowed for three-dimensional (3D) printing of micron scale fibers and very exact fiber placement. A singular set of box-shaped scaffolds of different sizes consisting of medical-grade PCL was examined and the scaffolds' morphology was evaluated via scanning electron microscopy (SEM). Each prototype sample with box sizes of 225 μm, 300 μm, 375 μm, 450 μm and 500 μm was assessed for cytotoxicity and cell growth by seeding each scaffold with human osteoblast-like cell line MG63. Results All scaffolds demonstrated good cytocompatibility according to cell viability, protein concentration, and cell number. SEM analysis revealed an exact fiber placement of the MEW scaffolds and the growth of viable MG63 cells on them. For the examined box-shaped scaffolds with pore sizes between 225 μm and 500 μm, a preferred box size for initial osteoblast attachment could not be found. Conclusions These well-defined 3D scaffolds consisting of medical-grade materials optimized for cell attachment and cell growth hold the key to a promising new approach in GBR in oral and maxillofacial surgery.},
  language  = {en}
}