@article{HazurDetschKarakayaetal.2020,
  author    = {Hazur, Jonas and Detsch, Rainer and Karakaya, Emine and Kaschta, Joachim and Teßmar, J{\"o}rg and Schneidereit, Dominik and Friedrich, Oliver and Schubert, Dirk W and Boccaccini, Aldo R},
  title     = {Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique},
  series = {Biofabrication},
  volume    = {12},
  journal   = {Biofabrication},
  number    = {4},
  doi       = {10.1088/1758-5090/ab98e5},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-254030},
  year      = {2020},
  abstract  = {Many different biofabrication approaches as well as a variety of bioinks have been developed by researchers working in the field of tissue engineering. A main challenge for bioinks often remains the difficulty to achieve shape fidelity after printing. In order to overcome this issue, a homogeneous pre-crosslinking technique, which is universally applicable to all alginate-based materials, was developed. In this study, the Young's Modulus after post-crosslinking of selected hydrogels, as well as the chemical characterization of alginate in terms of M/G ratio and molecular weight, were determined. With our technique it was possible to markedly enhance the printability of a 2\% (w/v) alginate solution, without using a higher polymer content, fillers or support structures. 3D porous scaffolds with a height of around 5 mm were printed. Furthermore, the rheological behavior of different pre-crosslinking degrees was studied. Shear forces on cells as well as the flow profile of the bioink inside the printing nozzle during the process were estimated. A high cell viability of printed NIH/3T3 cells embedded in the novel bioink of more than 85\% over a time period of two weeks could be observed.},
  language  = {en}
}
@article{RymaGencNadernezhadetal.2022,
  author    = {Ryma, Matthias and Gen{\c{c}}, Hatice and Nadernezhad, Ali and Paulus, Ilona and Schneidereit, Dominik and Friedrich, Oliver and Andelovic, Kristina and Lyer, Stefan and Alexiou, Christoph and Cicha, Iwona and Groll, J{\"u}rgen},
  title     = {A Print-and-Fuse Strategy for Sacrificial Filaments Enables Biomimetically Structured Perfusable Microvascular Networks with Functional Endothelium Inside 3D Hydrogels},
  series = {Advanced Materials},
  volume    = {34},
  journal   = {Advanced Materials},
  number    = {28},
  doi       = {10.1002/adma.202200653},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-318532},
  year      = {2022},
  abstract  = {A facile and flexible approach for the integration of biomimetically branched microvasculature within bulk hydrogels is presented. For this, sacrificial scaffolds of thermoresponsive poly(2-cyclopropyl-2-oxazoline) (PcycloPrOx) are created using melt electrowriting (MEW) in an optimized and predictable way and subsequently placed into a customized bioreactor system, which is then filled with a hydrogel precursor solution. The aqueous environment above the lower critical solution temperature (LCST) of PcycloPrOx at 25 °C swells the polymer without dissolving it, resulting in fusion of filaments that are deposited onto each other (print-and-fuse approach). Accordingly, an adequate printing pathway design results in generating physiological-like branchings and channel volumes that approximate Murray's law in the geometrical ratio between parent and daughter vessels. After gel formation, a temperature decrease below the LCST produces interconnected microchannels with distinct inlet and outlet regions. Initial placement of the sacrificial scaffolds in the bioreactors in a pre-defined manner directly yields perfusable structures via leakage-free fluid connections in a reproducible one-step procedure. Using this approach, rapid formation of a tight and biologically functional endothelial layer, as assessed not only through fluorescent dye diffusion, but also by tumor necrosis factor alpha (TNF-α) stimulation, is obtained within three days.},
  language  = {en}
}