@phdthesis{Maisch2018,
  author    = {Maisch, Stefan},
  title     = {Synthese von V- und brettf{\"o}rmigen Nematogenen und die Untersuchung ihrer biaxialen Ordnung in Mesophasen},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155409},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Die vorliegende Arbeit befasst sich mit der Synthese und Untersuchung V- und brettf{\"o}rmiger Fl{\"u}ssigkristalle zur Realisierung einer biaxialen nematischen Mesophase. Es wurde erfolgreich eine Serie neuer Mesogene mit hockeyschl{\"a}gerf{\"o}rmiger und V-f{\"o}rmiger Struktur synthetisiert. Zus{\"a}tzlich wurden Dimere aus einem dieser hockeyschl{\"a}gerf{\"o}rmigen Verbindungen dargestellt. Als Kernbaustein wurde Benzo[1,2-b:4,3-b']dithiophen verwendet, dessen lokales Kerndipolmoment von 1.0 Debye sich nach theoretischen Vorgaben zus{\"a}tzlich zum Bindungswinkel (108.9 °) positiv auf die Bildung einer Nb-Phase auswirken soll. {\"U}berraschenderweise bilden nur die hockeyschl{\"a}gerf{\"o}rmigen Molek{\"u}le eine uniaxiale, optisch positive nematische Mesophase aus. Alle anderen V-f{\"o}rmigen Verbindungen und sogar die Dimere sind ausschließlich kristallin und keine Fl{\"u}ssigkristalle. Die Einkristallstrukturanalyse eines hockeyschl{\"a}gerf{\"o}rmigen Mesogens sowie eines V-f{\"o}rmigen Molek{\"u}ls zeigt bemerkenswerte {\"A}hnlichkeiten auf. Ein Modell des Phasen{\"u}bergangs wird pr{\"a}sentiert, welches die Abwesenheit der nematischen Mesophase in der Familie der V-f{\"o}rmigen, formstabilen Mesogene mit terminalen aliphatischen Ketten erkl{\"a}rt. Zudem befasst sich die Arbeit mit der Synthese und der Untersuchung brettf{\"o}rmiger Molek{\"u}le, welche dem optimalen Seitenverh{\"a}ltnis von 15 : 5 : 3 mit L > B > T zur Bildung biaxialer Mesophasen, relativ nahekommen. Ein Anthrachinon-Kernbaustein wurde dabei mit Armen bestehend aus einem Oligo(phenylenethinylen)-Grundger{\"u}st entsprechender L{\"a}nge verkn{\"u}pft. Es konnten verschiedene dachf{\"o}rmige Mesogene dargestellt werden, bei denen die Art und Anzahl der Seitenketten sowie der terminalen Ketten variiert wurde. Thermische sowie mikroskopische Untersuchungen zeigen bei allen Verbindungen eine breite nematische Mesophase. Mittels spezieller R{\"o}ntgenstreuung im magnetischen Feld kann die Bildung nematischer Dom{\"a}nen mit SmC-artigen biaxialen Aggregaten best{\"a}tigt werden.},
  subject      = {Thermotroper Fl{\"u}ssigkristall},
  language  = {de}
}
@phdthesis{Auerhammer2018,
  author    = {Auerhammer, Nina A.},
  title     = {Energy Transfer and Excitonic Interactions in Conjugated Chromophore Arrangements of Bodipys and Pyrenes and Squaraines},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-166721},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {In this work the energy transfer and excitonic coupling in different chromophore arrangements were investigated. A difference in the coupling strength was introduced by varring the connecting unit and the spacial orientation relative to each other. The synthesis of the 2,7-substituted pyrene compounds could be optimised and good yields of HAB 1 and HAB 2 and small amounts of HAB 2 could be achieved by cobalt-catalysed trimerisation or Diels Alder reaction in the end. Absorption and fluorescence spectra reveal strong intramolecular interactions between the pyrene molecules in the HAB 1. Excitation spectra recorded at the high and low energy fluorescence suggest the contribution of two components to the spectra. One being similar to the ground state aggregate and a second species similar to undisturbed pyrene. All these feature can be accounted to two different fluorescent states which are due to electronical decoupling in the excited state. Due to the strong intramolecular coupling already in the ground state of the molecule, no energy transfer could be studied, as the six pyrene units cannot be seen as separate spectroscopic entities between which energy could be transferred. In the second part of this thesis dye conjugates of different size and alignment were synthesised to study the interaction of the transition-dipole moments. Therefore a systematic investigation of Sonogashira conditions was performed in order to obtain good yields of the desired compounds and keep dehalogenation at a minimum level. Nevertheless only the symmetrical triads could be purified as the asymmeric triads and pentades proved to decompose during purification. The pyrene containing triads Py2B and Py2SQB show small interactions already in the ground state represented by red shifts of the spectra and a broadening of the bands. Nevertheless, these interactions are in the weak coupling regime and energy transfer between the constituents is possible. On the contrary in the TA spectra it is obvious that always the whole triad, at least to some extend is excited. To question if the excitation of the high energy state is deactivated by energy transfer or rather IC in a superchromophore could not be distinguished in the course of this work. At present additional time-dependent calculations of the dynamics are in progress to get a deeper understanding of the photophysical processes taking place in the triads. The dye conjugates B2SQB-3 and (SQB)2B-4 can be assigned to the strong interaction range and hence are describable by exciton theory. The transition-dipole moments proved to be more than additive and increase for both compounds from absorption to fluorescence. This can be explained by an enhancement of the coupling in the relaxed excited state compared to the absorption into the Franck-Condon state due to a more steep potential energy surface in the excited state and hence smaller fluctuations. In the last part of this thesis the influence of disrupting electronical communication by implementing a rigid non-conjugated bridge in a bichromophoric trans-squaraine system was tested. While the flexible linked squaraines show complex spectra due to different conformers the SQA2Anth compound is rigified and no rotation is possible. This change in flexibility is represented in the steady-state spectra where just one main absorption and fluorescence band is present due to a single allowed excitonic state. The system proves to own an excited state that is completely delocalised over the whole molecule.},
  subject      = {Chromophor},
  language  = {en}
}
@phdthesis{Huegel2018,
  author    = {H{\"u}gel, Markus},
  title     = {The control of nanomorphology in star-shaped mesogens},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-165321},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined.},
  subject      = {Fl{\"u}ssigkristall},
  language  = {en}
}
@phdthesis{Eck2018,
  author    = {Eck, Martin},
  title     = {Iron- and Copper-catalyzed Borylation of Alkyl and Aryl Halides and B-B Bond Activation and NHC Ring-expansion Reactions of the Diboron(4) Compound Bis(ethylene glycolato)diboron (B\(_2\)eg\(_2\))},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-149791},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {The purpose of the present work was, in the first part, to investigate the potential of iron-based metal complexes in catalytic borylation reactions with alkyl halides as substrates and B2pin2 as the borylation reagent. Moreover, extended studies of the recently reported, copper mediated borylation reactions of aryl halides were performed, including the screening of substrates and alkoxy bases as well as ligand-screening. Investigations were undertaken on the role of Cu-nanoparticles, which might be involved in this catalytic reaction. Furthermore, Cu-phosphine complexes were synthesized as precursors, but attempts to isolate Cu-boryl species which are intermediates in the proposed catalytic cycle were unsuccessful, although 11B NMR evidence for a Cu-boryl complex was obtained. In the second part of this work, the alternative, Lewis-acidic diboron(4) compound bis(ethylene glycolato)diboron (B2eg2) was synthesized to compare its reactivity with the reactivity of other diboron(4) compounds (e.g. B2neop2, B2cat2, B2pin2 and B2(NMe2)4). Therefore, reactions of B2eg2 with different Lewis-bases, such as NHCs and phosphines, were performed to investigate the possible formation of sp2-sp3 or sp3-sp3 adducts and ring-expansion reactions (RERs). The aim was to obtain a better general insight into the reactivity of diboron(4) compounds with Lewis-bases because they are both used as reactants in transition metal-catalyzed and metal-free borylation reactions. Understanding the B-B bond activation process promoted by Lewis-bases provides a new perspective on the reaction pathways available for various borylation reactions.},
  language  = {en}
}
@phdthesis{Wachtler2020,
  author    = {Wachtler, Stefan},
  title     = {Synthese und Charakterisierung von funktionalisierten Nanodiamantmaterialien f{\"u}r biomedizinische Anwendungen},
  doi       = {10.25972/OPUS-21075},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-210757},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {In dieser Arbeit ist die Synthese von funktionalisiertem Nanodiamant mit bioaktiven Substanzen, welche vor allem als Wirkstofftransporter eingesetzt werden sollen, beschrieben. Dazu werden zum einen bereits bekannte Anbindungsm{\"o}glichkeiten an Nanodiamant, wie zum Beispiel die Klick-Reaktion, sowie die Ausbildung von Amidbr{\"u}cken verwendet. Zum anderen werden neuartige Funktionalisierungsm{\"o}glichkeiten wie Protein Ligation und Thioharnstoffbr{\"u}cken verwendet und somit das Repertoire an bekannten Anbindungsreaktion erweitert. Des weiteren wurde ein multifunktionales Nanodiamantsystem synthetisiert. Dieses ist in der Lage, zwei verschiedene Molek{\"u}le auf einem Partikel zu immobilisieren. Die verwendeten Methoden erm{\"o}glichen die Anbindung verschiedener Substanzen aus unterschiedlichen Molek{\"u}lgruppen an Nanodiamanten und sind somit universell einsetzbar.},
  subject      = {Synthesediamant},
  language  = {de}
}
@phdthesis{KimbadiLombe2021,
  author    = {Kimbadi Lombe, Blaise},
  title     = {Novel-Type Dimeric Naphthylisoquinoline Alkaloids from Congolese Ancistrocladus Lianas: Isolation, Structural Elucidation, and Antiprotozoal and Anti-Tumoral Activities},
  doi       = {10.25972/OPUS-19178},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-191789},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2021},
  abstract  = {Herein described is the discovery of three novel types of dimeric naphthylisoquinoline alkaloids, named mbandakamines, cyclombandakamines, and spirombandakamines. They were found in the leaves of a botanically as yet unidentified, potentially new Ancistrocladus species, collected in the rainforest of the Democratic Republic of the Congo (DRC). Mbandakamines showed an exceptional 6′,1′′-coupling, in the peri-position neighboring one of the outer axes, leading to an extremely high steric hindrance at the central axis, and to U-turn-like molecular shape, which - different from all other dimeric NIQs, whose basic structures are all quite linear - brings three of the four bicyclic ring systems in close proximity to each other. This created an unprecedented follow-up chemistry, involving ring closure reactions, leading to two further, structurally even more intriguing subclasses, the cyclo- and the spirombandakamines, displaying eight stereogenic elements (the highest total number ever found in naphthylisoquinoline alkaloids). The metabolites exhibited pronounced antiplasmodial and antitrypanosomal activities. Likewise reported in this doctoral thesis are the isolation and structural elucidation of naphthylisoquinoline alkaloids from two further potentially new Ancistrocladus species from DRC. Some of these metabolites have shown pronounced antiausterity activities against human pancreatic cancer PANC-1 cells.},
  subject      = {Naphthylisochinolinalkaloide},
  language  = {en}
}
@phdthesis{Sieck2018,
  author    = {Sieck, Carolin},
  title     = {Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-154844},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2018},
  abstract  = {The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon-carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S' diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2'-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2'-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2'-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2'-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54\% and very short lifetimes (τ = 0.2 - 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2'-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 - 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2'-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.},
  subject      = {{\"U}bergangsmetallkomplexe},
  language  = {en}
}
@phdthesis{Maier2020,
  author    = {Maier, Philipp},
  title     = {Synthese und Struktur-Eigenschafts-Beziehungen sterisch {\"u}berfrachteter Sternmesogene mit hexasubstituiertem Benzolkern und ihrer Wirt-Gast-Mesogene},
  doi       = {10.25972/OPUS-18527},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-185274},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2020},
  abstract  = {Die vorliegende Dissertation befasst sich mit den Struktur-Eigenschafts-Beziehungen von sternf{\"o}rmigen Mesogenen mit kontrollierbaren Konformationen in den LC-Phasen. Zun{\"a}chst sollte mithilfe verschiedener Molek{\"u}ldesigns gekl{\"a}rt werden, wie eine Faltung der Arme verhindert werden kann, und somit, ob sternf{\"o}rmige Konformationen in den kolumnaren Packungen realisiert werden k{\"o}nnen. Hierzu wurde erfolgreich eine Bibliothek von dreiarmigen Amidsternen, semiflexiblen Oligoestersternen mit hexasubstituiertem Benzolkern und formtreuen hexasubstituierten Benzolen synthetisiert. Die besondere Herausforderung bei der Darstellung letzterer lag in der C3-Symmetrie der Verbindungen und konnte durch Optimierung der Synthesestrategie mittels aufeinander folgender Wittig-Horner- und Suzuki-Reaktionen in einem divergenten Ansatz gemeistert werden. Ein herausragendes Ergebnis ist die Fl{\"u}ssigkristallinit{\"a}t dieser formtreuen hexasubstituierten Strukturen, wenn sie mindestens neun bzw. zw{\"o}lf periphere Ketten besitzen. Die detaillierte Auswertung der Kolumnendurchmesser mithilfe von {\"a}quatorialen Reflexen sowie der Dichte und der meridionalen Beugungsmuster zeigen, dass lediglich f{\"u}r die formtreuen hexasubstituierten Benzolderivate eine Faltung verhindert werden kann. Intrinsische Freir{\"a}ume (K{\"a}vit{\"a}ten) zwischen den Oligo(phenylenvinylen)-Armen werden durch außergew{\"o}hnliche Dimerenbildung und helikale Packung der Molek{\"u}le kompensiert. In die Kavit{\"a}ten der Trispyridylverbindungen k{\"o}nnen Carbons{\"a}ure-funktionalisierte G{\"a}ste unter Ausbildung von Wasserstoffbr{\"u}cken eingelagert werden. Mit zunehmender Gastkonzentration wird die helikale Dimerphase des Wirts kontinuierlich in eine neue kolumnare Phase von monomeren Supermesogenen ohne helikale Struktur umgewandelt. Da die G{\"a}ste in den Supermesogenen vollst{\"a}ndig von den Oligo(phenylenvinylen)-Armen und den aliphatischen Ketten umschlossen sind, handelt es sich bei der Wirtverbindung erstmals um einen fl{\"u}ssigkristallinen Endorezeptor mit drei Bindungsstellen. Das Sternmesogen mit gr{\"o}ßeren intrinsischen Freir{\"a}umen erm{\"o}glicht die Einlagerung von funktionalen Bausteinen wie z.B. Anthracenchromophoren. Aus Untersuchungen mittels Festk{\"o}rper-NMR- und Fluoreszenzspektroskopie geht hervor, dass sich die Mesophase mit drei Anthraceng{\"a}sten langsam in eine doppelt nanosegregierte Struktur umwandelt, in der intrakolumnar Oligo(phenylenvinylen)-Arme und Anthracene Seite an Seite segregiert stapeln und so segmentierte Kolumnen bilden. Diese Art von doppelter Nanosegregation offenbart das Potential des verwendeten Molek{\"u}ldesigns im Bezug auf die Entwicklung mesomorpher Multikabelstrukturen. Im Vergleich zu den Supermesogenen weisen die analogen Sternverbindungen mit kovalent gebundenen Pseudog{\"a}sten um {\"u}ber 100 °C h{\"o}here Kl{\"a}rpunkte auf, was unter Ber{\"u}cksichtigung der strukturellen {\"A}hnlichkeit der kolumnaren Phasen und der {\"a}hnlichen Mischungsenthalpien in unterschiedlichen Werten der Mischungsentropie begr{\"u}ndet liegen muss. Der Vergleich mit einer 1:3-Mischung ohne spezifische Wirt-Gast-Wechselwirkung best{\"a}tigt in diesem Zusammenhang den Einfluss der Bindungsart der G{\"a}ste auf die Mesophasenstabilit{\"a}t. Die Kl{\"a}rtemperaturen der Sternmesogene lassen sich folglich {\"u}ber die Art der Bindung der Gastmolek{\"u}le kontrollieren. Dies ist vor allem f{\"u}r die Orientierung kolumnarer Phasen in d{\"u}nnen Filmen großer funktionaler Mesogene, die h{\"a}ufig erst bei sehr hohen Temperaturen unter Zersetzung in die isotrope Phase {\"u}bergehen, interessant.},
  subject      = {Thermotroper Fl{\"u}ssigkristall},
  language  = {de}
}
@phdthesis{Roedel2019,
  author    = {R{\"o}del, Michaela},
  title     = {Development of Dual Setting Cement Systems as Composite Biomaterials with Ductile Properties},
  doi       = {10.25972/OPUS-18277},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-182776},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Synthetic bone replacement materials have their application in non-load bearing defects with the function of (re-)construction or substitution of bone. This tissue itself represents a biological composite material based on mineralized collagen fibrils and combines the mechanical strength of the mineral with the ductility of the organic matrix. By mimicking these outstanding properties with polymer-cement-composites, an imitation of bone is feasible. A promising approach for such replacement materials are dual setting systems, which are generated by dissolution-precipitation reaction with cement setting in parallel to polymerization and gelation of the organic phase forming a coherent hydrogel network. Hereby, the high brittleness of the pure inorganic network was shifted to a more ductile and elastic behavior. The aim of this thesis was focused on the development of different dual setting systems to modify pure calcium phosphate cements' (CPCs') mechanical performance by incorporation of a hydrogel matrix. A dual setting system based on hydroxyapatite (HA) and cross-linked 2-hydroxyethyl methacrylate (HEMA) via radical polymerization was advanced by homogenous incorporation of a degradable cross-linker composed of poly(ethylene glycol) (PEG) as well as poly(lactic acid) (PLA) with reactive terminal methacrylate functionalities (PEG-PLLA-DMA). By integration of this high molecular weight structure in the HEMA-hydrogel network, a significant increase in energy absorption (toughness) under 4-point bending testing was observed. An addition of only 10 wt\% hydrogel precursor (referred to the liquid phase) resulted in a duplication of stress over a period of 8 days. Additionally, the calculated elasticity was positively affected and up to six times higher compared to pure HA. With a constantly applied force during compressive strength testing, a deformation and thus strain levels of about 10 \% were reached immediately after preparation. For higher degradability, the system was modified in a second approach regarding organic as well as inorganic phase. The latter component was changed by brushite forming cement that is resorbable in vivo due to solubility processes. This CPC was combined with a hydrogel based on PEG-PLLA-DMA and other dimethacrylated PEGs with different molecular weights and concentrations. Hereby, new reaction conditions were created including a shift to acidic conditions. On this ground, the challenge was to find a new radical initiator system. Suitable candidates were ascorbic acid and hydrogen peroxide. that started the polymerization and successful gelation in this environment. These highly flexible dual set composites showed a very high ductility with an overall low strength compared to HA-based models. After removal of the applied force during compressive strength testing, a complete shape recovery was observed for the samples containing the highest polymeric amount (50 wt\%) of PEG-PLLA-DMA. Regarding phase distribution in the constructs, a homogenously incorporated hydrogel network was demonstrated in a decalcifying study with ethylenediaminetetraacetic acid. Intact, coherent hydrogels remained after dissolution of the inorganic phase via calcium ion complexation. In a third approach, the synthetic hydrogel matrix of the previously described system was replaced by the natural biopolymer gelatin. Simultaneously to brushite formation, physical as well as chemical cross-linking by the compound genipin was performed in the dual setting materials. Thanks to the incorporation of gelatin, elasticity increased significantly, in which concentrations up to 10.0 w/v\% resulted in a certain cohesion of samples after compressive strength testing. They did not dissociate in little pieces but remained intact cuboid specimens though having cracks or fissures. Furthermore, the drug release of two active pharmaceutical ingredients (vancomycin and rifampicin) was investigated over a time frame of 5 weeks. The release exponent was determined according to Korsmeyer-Peppas with n = 0.5 which corresponds to the drug liberation model of Higuchi. A sustained release was observed for the antibiotic vancomycin encapsulated in composites with a gelatin concentration of 10.0 w/v\% and a powder-to-liquid ratio of 2.5 g/mL. With respect to these developments of different dual setting systems, three novel approaches were successfully established by polymerization of monomers and cross-linking of precursors forming an incorporated, homogenous hydrogel matrix in a calcium phosphate network. All studies showed an essential transfer of mechanical performance in direction of flexibility and bendability.},
  subject      = {Calciumphosphate},
  language  = {en}
}
@phdthesis{Li2015,
  author    = {Li, Han},
  title     = {Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123407},
  school      = {Universit{\"a}t W{\"u}rzburg},
  pages     = {159},
  year      = {2015},
  abstract  = {In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.},
  subject      = {Kohlenstoff-Nanor{\"o}hre},
  language  = {en}
}