@phdthesis{Maisch2018, author = {Maisch, Stefan}, title = {Synthese von V- und brettf{\"o}rmigen Nematogenen und die Untersuchung ihrer biaxialen Ordnung in Mesophasen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-155409}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Die vorliegende Arbeit befasst sich mit der Synthese und Untersuchung V- und brettf{\"o}rmiger Fl{\"u}ssigkristalle zur Realisierung einer biaxialen nematischen Mesophase. Es wurde erfolgreich eine Serie neuer Mesogene mit hockeyschl{\"a}gerf{\"o}rmiger und V-f{\"o}rmiger Struktur synthetisiert. Zus{\"a}tzlich wurden Dimere aus einem dieser hockeyschl{\"a}gerf{\"o}rmigen Verbindungen dargestellt. Als Kernbaustein wurde Benzo[1,2-b:4,3-b']dithiophen verwendet, dessen lokales Kerndipolmoment von 1.0 Debye sich nach theoretischen Vorgaben zus{\"a}tzlich zum Bindungswinkel (108.9 °) positiv auf die Bildung einer Nb-Phase auswirken soll. {\"U}berraschenderweise bilden nur die hockeyschl{\"a}gerf{\"o}rmigen Molek{\"u}le eine uniaxiale, optisch positive nematische Mesophase aus. Alle anderen V-f{\"o}rmigen Verbindungen und sogar die Dimere sind ausschließlich kristallin und keine Fl{\"u}ssigkristalle. Die Einkristallstrukturanalyse eines hockeyschl{\"a}gerf{\"o}rmigen Mesogens sowie eines V-f{\"o}rmigen Molek{\"u}ls zeigt bemerkenswerte {\"A}hnlichkeiten auf. Ein Modell des Phasen{\"u}bergangs wird pr{\"a}sentiert, welches die Abwesenheit der nematischen Mesophase in der Familie der V-f{\"o}rmigen, formstabilen Mesogene mit terminalen aliphatischen Ketten erkl{\"a}rt. Zudem befasst sich die Arbeit mit der Synthese und der Untersuchung brettf{\"o}rmiger Molek{\"u}le, welche dem optimalen Seitenverh{\"a}ltnis von 15 : 5 : 3 mit L > B > T zur Bildung biaxialer Mesophasen, relativ nahekommen. Ein Anthrachinon-Kernbaustein wurde dabei mit Armen bestehend aus einem Oligo(phenylenethinylen)-Grundger{\"u}st entsprechender L{\"a}nge verkn{\"u}pft. Es konnten verschiedene dachf{\"o}rmige Mesogene dargestellt werden, bei denen die Art und Anzahl der Seitenketten sowie der terminalen Ketten variiert wurde. Thermische sowie mikroskopische Untersuchungen zeigen bei allen Verbindungen eine breite nematische Mesophase. Mittels spezieller R{\"o}ntgenstreuung im magnetischen Feld kann die Bildung nematischer Dom{\"a}nen mit SmC-artigen biaxialen Aggregaten best{\"a}tigt werden.}, subject = {Thermotroper Fl{\"u}ssigkristall}, language = {de} } @phdthesis{Auerhammer2018, author = {Auerhammer, Nina A.}, title = {Energy Transfer and Excitonic Interactions in Conjugated Chromophore Arrangements of Bodipys and Pyrenes and Squaraines}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-166721}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {In this work the energy transfer and excitonic coupling in different chromophore arrangements were investigated. A difference in the coupling strength was introduced by varring the connecting unit and the spacial orientation relative to each other. The synthesis of the 2,7-substituted pyrene compounds could be optimised and good yields of HAB 1 and HAB 2 and small amounts of HAB 2 could be achieved by cobalt-catalysed trimerisation or Diels Alder reaction in the end. Absorption and fluorescence spectra reveal strong intramolecular interactions between the pyrene molecules in the HAB 1. Excitation spectra recorded at the high and low energy fluorescence suggest the contribution of two components to the spectra. One being similar to the ground state aggregate and a second species similar to undisturbed pyrene. All these feature can be accounted to two different fluorescent states which are due to electronical decoupling in the excited state. Due to the strong intramolecular coupling already in the ground state of the molecule, no energy transfer could be studied, as the six pyrene units cannot be seen as separate spectroscopic entities between which energy could be transferred. In the second part of this thesis dye conjugates of different size and alignment were synthesised to study the interaction of the transition-dipole moments. Therefore a systematic investigation of Sonogashira conditions was performed in order to obtain good yields of the desired compounds and keep dehalogenation at a minimum level. Nevertheless only the symmetrical triads could be purified as the asymmeric triads and pentades proved to decompose during purification. The pyrene containing triads Py2B and Py2SQB show small interactions already in the ground state represented by red shifts of the spectra and a broadening of the bands. Nevertheless, these interactions are in the weak coupling regime and energy transfer between the constituents is possible. On the contrary in the TA spectra it is obvious that always the whole triad, at least to some extend is excited. To question if the excitation of the high energy state is deactivated by energy transfer or rather IC in a superchromophore could not be distinguished in the course of this work. At present additional time-dependent calculations of the dynamics are in progress to get a deeper understanding of the photophysical processes taking place in the triads. The dye conjugates B2SQB-3 and (SQB)2B-4 can be assigned to the strong interaction range and hence are describable by exciton theory. The transition-dipole moments proved to be more than additive and increase for both compounds from absorption to fluorescence. This can be explained by an enhancement of the coupling in the relaxed excited state compared to the absorption into the Franck-Condon state due to a more steep potential energy surface in the excited state and hence smaller fluctuations. In the last part of this thesis the influence of disrupting electronical communication by implementing a rigid non-conjugated bridge in a bichromophoric trans-squaraine system was tested. While the flexible linked squaraines show complex spectra due to different conformers the SQA2Anth compound is rigified and no rotation is possible. This change in flexibility is represented in the steady-state spectra where just one main absorption and fluorescence band is present due to a single allowed excitonic state. The system proves to own an excited state that is completely delocalised over the whole molecule.}, subject = {Chromophor}, language = {en} } @phdthesis{Huegel2018, author = {H{\"u}gel, Markus}, title = {The control of nanomorphology in star-shaped mesogens}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-165321}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {Stilbene-based star-shaped mesogens have been synthesized with and without fullerene guests. Thermotropic properties and the mechanism of space-filling in the mesophases of these systems have been examined.}, subject = {Fl{\"u}ssigkristall}, language = {en} } @phdthesis{Eck2018, author = {Eck, Martin}, title = {Iron- and Copper-catalyzed Borylation of Alkyl and Aryl Halides and B-B Bond Activation and NHC Ring-expansion Reactions of the Diboron(4) Compound Bis(ethylene glycolato)diboron (B\(_2\)eg\(_2\))}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-149791}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {The purpose of the present work was, in the first part, to investigate the potential of iron-based metal complexes in catalytic borylation reactions with alkyl halides as substrates and B2pin2 as the borylation reagent. Moreover, extended studies of the recently reported, copper mediated borylation reactions of aryl halides were performed, including the screening of substrates and alkoxy bases as well as ligand-screening. Investigations were undertaken on the role of Cu-nanoparticles, which might be involved in this catalytic reaction. Furthermore, Cu-phosphine complexes were synthesized as precursors, but attempts to isolate Cu-boryl species which are intermediates in the proposed catalytic cycle were unsuccessful, although 11B NMR evidence for a Cu-boryl complex was obtained. In the second part of this work, the alternative, Lewis-acidic diboron(4) compound bis(ethylene glycolato)diboron (B2eg2) was synthesized to compare its reactivity with the reactivity of other diboron(4) compounds (e.g. B2neop2, B2cat2, B2pin2 and B2(NMe2)4). Therefore, reactions of B2eg2 with different Lewis-bases, such as NHCs and phosphines, were performed to investigate the possible formation of sp2-sp3 or sp3-sp3 adducts and ring-expansion reactions (RERs). The aim was to obtain a better general insight into the reactivity of diboron(4) compounds with Lewis-bases because they are both used as reactants in transition metal-catalyzed and metal-free borylation reactions. Understanding the B-B bond activation process promoted by Lewis-bases provides a new perspective on the reaction pathways available for various borylation reactions.}, language = {en} } @phdthesis{Wachtler2020, author = {Wachtler, Stefan}, title = {Synthese und Charakterisierung von funktionalisierten Nanodiamantmaterialien f{\"u}r biomedizinische Anwendungen}, doi = {10.25972/OPUS-21075}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-210757}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {In dieser Arbeit ist die Synthese von funktionalisiertem Nanodiamant mit bioaktiven Substanzen, welche vor allem als Wirkstofftransporter eingesetzt werden sollen, beschrieben. Dazu werden zum einen bereits bekannte Anbindungsm{\"o}glichkeiten an Nanodiamant, wie zum Beispiel die Klick-Reaktion, sowie die Ausbildung von Amidbr{\"u}cken verwendet. Zum anderen werden neuartige Funktionalisierungsm{\"o}glichkeiten wie Protein Ligation und Thioharnstoffbr{\"u}cken verwendet und somit das Repertoire an bekannten Anbindungsreaktion erweitert. Des weiteren wurde ein multifunktionales Nanodiamantsystem synthetisiert. Dieses ist in der Lage, zwei verschiedene Molek{\"u}le auf einem Partikel zu immobilisieren. Die verwendeten Methoden erm{\"o}glichen die Anbindung verschiedener Substanzen aus unterschiedlichen Molek{\"u}lgruppen an Nanodiamanten und sind somit universell einsetzbar.}, subject = {Synthesediamant}, language = {de} } @phdthesis{KimbadiLombe2021, author = {Kimbadi Lombe, Blaise}, title = {Novel-Type Dimeric Naphthylisoquinoline Alkaloids from Congolese Ancistrocladus Lianas: Isolation, Structural Elucidation, and Antiprotozoal and Anti-Tumoral Activities}, doi = {10.25972/OPUS-19178}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-191789}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {Herein described is the discovery of three novel types of dimeric naphthylisoquinoline alkaloids, named mbandakamines, cyclombandakamines, and spirombandakamines. They were found in the leaves of a botanically as yet unidentified, potentially new Ancistrocladus species, collected in the rainforest of the Democratic Republic of the Congo (DRC). Mbandakamines showed an exceptional 6′,1′′-coupling, in the peri-position neighboring one of the outer axes, leading to an extremely high steric hindrance at the central axis, and to U-turn-like molecular shape, which - different from all other dimeric NIQs, whose basic structures are all quite linear - brings three of the four bicyclic ring systems in close proximity to each other. This created an unprecedented follow-up chemistry, involving ring closure reactions, leading to two further, structurally even more intriguing subclasses, the cyclo- and the spirombandakamines, displaying eight stereogenic elements (the highest total number ever found in naphthylisoquinoline alkaloids). The metabolites exhibited pronounced antiplasmodial and antitrypanosomal activities. Likewise reported in this doctoral thesis are the isolation and structural elucidation of naphthylisoquinoline alkaloids from two further potentially new Ancistrocladus species from DRC. Some of these metabolites have shown pronounced antiausterity activities against human pancreatic cancer PANC-1 cells.}, subject = {Naphthylisochinolinalkaloide}, language = {en} } @phdthesis{Sieck2018, author = {Sieck, Carolin}, title = {Synthesis and Photophysical Properties of Luminescent Rhodacyclopentadienes and Rhodium 2,2'-Biphenyl Complexes}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-154844}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2018}, abstract = {The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment. Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon-carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes. In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S' diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2'-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies. In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2'-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors. Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before. As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2'-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane. Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2'-bph transition metal complexes. On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature). With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54\% and very short lifetimes (τ = 0.2 - 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure  and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster. In stark contrast, the 2,2'-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 - 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2'-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields. Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands. Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work. Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed. Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes. Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided. The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct). CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.}, subject = {{\"U}bergangsmetallkomplexe}, language = {en} } @phdthesis{Maier2020, author = {Maier, Philipp}, title = {Synthese und Struktur-Eigenschafts-Beziehungen sterisch {\"u}berfrachteter Sternmesogene mit hexasubstituiertem Benzolkern und ihrer Wirt-Gast-Mesogene}, doi = {10.25972/OPUS-18527}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-185274}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2020}, abstract = {Die vorliegende Dissertation befasst sich mit den Struktur-Eigenschafts-Beziehungen von sternf{\"o}rmigen Mesogenen mit kontrollierbaren Konformationen in den LC-Phasen. Zun{\"a}chst sollte mithilfe verschiedener Molek{\"u}ldesigns gekl{\"a}rt werden, wie eine Faltung der Arme verhindert werden kann, und somit, ob sternf{\"o}rmige Konformationen in den kolumnaren Packungen realisiert werden k{\"o}nnen. Hierzu wurde erfolgreich eine Bibliothek von dreiarmigen Amidsternen, semiflexiblen Oligoestersternen mit hexasubstituiertem Benzolkern und formtreuen hexasubstituierten Benzolen synthetisiert. Die besondere Herausforderung bei der Darstellung letzterer lag in der C3-Symmetrie der Verbindungen und konnte durch Optimierung der Synthesestrategie mittels aufeinander folgender Wittig-Horner- und Suzuki-Reaktionen in einem divergenten Ansatz gemeistert werden. Ein herausragendes Ergebnis ist die Fl{\"u}ssigkristallinit{\"a}t dieser formtreuen hexasubstituierten Strukturen, wenn sie mindestens neun bzw. zw{\"o}lf periphere Ketten besitzen. Die detaillierte Auswertung der Kolumnendurchmesser mithilfe von {\"a}quatorialen Reflexen sowie der Dichte und der meridionalen Beugungsmuster zeigen, dass lediglich f{\"u}r die formtreuen hexasubstituierten Benzolderivate eine Faltung verhindert werden kann. Intrinsische Freir{\"a}ume (K{\"a}vit{\"a}ten) zwischen den Oligo(phenylenvinylen)-Armen werden durch außergew{\"o}hnliche Dimerenbildung und helikale Packung der Molek{\"u}le kompensiert. In die Kavit{\"a}ten der Trispyridylverbindungen k{\"o}nnen Carbons{\"a}ure-funktionalisierte G{\"a}ste unter Ausbildung von Wasserstoffbr{\"u}cken eingelagert werden. Mit zunehmender Gastkonzentration wird die helikale Dimerphase des Wirts kontinuierlich in eine neue kolumnare Phase von monomeren Supermesogenen ohne helikale Struktur umgewandelt. Da die G{\"a}ste in den Supermesogenen vollst{\"a}ndig von den Oligo(phenylenvinylen)-Armen und den aliphatischen Ketten umschlossen sind, handelt es sich bei der Wirtverbindung erstmals um einen fl{\"u}ssigkristallinen Endorezeptor mit drei Bindungsstellen. Das Sternmesogen mit gr{\"o}ßeren intrinsischen Freir{\"a}umen erm{\"o}glicht die Einlagerung von funktionalen Bausteinen wie z.B. Anthracenchromophoren. Aus Untersuchungen mittels Festk{\"o}rper-NMR- und Fluoreszenzspektroskopie geht hervor, dass sich die Mesophase mit drei Anthraceng{\"a}sten langsam in eine doppelt nanosegregierte Struktur umwandelt, in der intrakolumnar Oligo(phenylenvinylen)-Arme und Anthracene Seite an Seite segregiert stapeln und so segmentierte Kolumnen bilden. Diese Art von doppelter Nanosegregation offenbart das Potential des verwendeten Molek{\"u}ldesigns im Bezug auf die Entwicklung mesomorpher Multikabelstrukturen. Im Vergleich zu den Supermesogenen weisen die analogen Sternverbindungen mit kovalent gebundenen Pseudog{\"a}sten um {\"u}ber 100 °C h{\"o}here Kl{\"a}rpunkte auf, was unter Ber{\"u}cksichtigung der strukturellen {\"A}hnlichkeit der kolumnaren Phasen und der {\"a}hnlichen Mischungsenthalpien in unterschiedlichen Werten der Mischungsentropie begr{\"u}ndet liegen muss. Der Vergleich mit einer 1:3-Mischung ohne spezifische Wirt-Gast-Wechselwirkung best{\"a}tigt in diesem Zusammenhang den Einfluss der Bindungsart der G{\"a}ste auf die Mesophasenstabilit{\"a}t. Die Kl{\"a}rtemperaturen der Sternmesogene lassen sich folglich {\"u}ber die Art der Bindung der Gastmolek{\"u}le kontrollieren. Dies ist vor allem f{\"u}r die Orientierung kolumnarer Phasen in d{\"u}nnen Filmen großer funktionaler Mesogene, die h{\"a}ufig erst bei sehr hohen Temperaturen unter Zersetzung in die isotrope Phase {\"u}bergehen, interessant.}, subject = {Thermotroper Fl{\"u}ssigkristall}, language = {de} } @phdthesis{Roedel2019, author = {R{\"o}del, Michaela}, title = {Development of Dual Setting Cement Systems as Composite Biomaterials with Ductile Properties}, doi = {10.25972/OPUS-18277}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-182776}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Synthetic bone replacement materials have their application in non-load bearing defects with the function of (re-)construction or substitution of bone. This tissue itself represents a biological composite material based on mineralized collagen fibrils and combines the mechanical strength of the mineral with the ductility of the organic matrix. By mimicking these outstanding properties with polymer-cement-composites, an imitation of bone is feasible. A promising approach for such replacement materials are dual setting systems, which are generated by dissolution-precipitation reaction with cement setting in parallel to polymerization and gelation of the organic phase forming a coherent hydrogel network. Hereby, the high brittleness of the pure inorganic network was shifted to a more ductile and elastic behavior. The aim of this thesis was focused on the development of different dual setting systems to modify pure calcium phosphate cements' (CPCs') mechanical performance by incorporation of a hydrogel matrix. A dual setting system based on hydroxyapatite (HA) and cross-linked 2-hydroxyethyl methacrylate (HEMA) via radical polymerization was advanced by homogenous incorporation of a degradable cross-linker composed of poly(ethylene glycol) (PEG) as well as poly(lactic acid) (PLA) with reactive terminal methacrylate functionalities (PEG-PLLA-DMA). By integration of this high molecular weight structure in the HEMA-hydrogel network, a significant increase in energy absorption (toughness) under 4-point bending testing was observed. An addition of only 10 wt\% hydrogel precursor (referred to the liquid phase) resulted in a duplication of stress over a period of 8 days. Additionally, the calculated elasticity was positively affected and up to six times higher compared to pure HA. With a constantly applied force during compressive strength testing, a deformation and thus strain levels of about 10 \% were reached immediately after preparation. For higher degradability, the system was modified in a second approach regarding organic as well as inorganic phase. The latter component was changed by brushite forming cement that is resorbable in vivo due to solubility processes. This CPC was combined with a hydrogel based on PEG-PLLA-DMA and other dimethacrylated PEGs with different molecular weights and concentrations. Hereby, new reaction conditions were created including a shift to acidic conditions. On this ground, the challenge was to find a new radical initiator system. Suitable candidates were ascorbic acid and hydrogen peroxide. that started the polymerization and successful gelation in this environment. These highly flexible dual set composites showed a very high ductility with an overall low strength compared to HA-based models. After removal of the applied force during compressive strength testing, a complete shape recovery was observed for the samples containing the highest polymeric amount (50 wt\%) of PEG-PLLA-DMA. Regarding phase distribution in the constructs, a homogenously incorporated hydrogel network was demonstrated in a decalcifying study with ethylenediaminetetraacetic acid. Intact, coherent hydrogels remained after dissolution of the inorganic phase via calcium ion complexation. In a third approach, the synthetic hydrogel matrix of the previously described system was replaced by the natural biopolymer gelatin. Simultaneously to brushite formation, physical as well as chemical cross-linking by the compound genipin was performed in the dual setting materials. Thanks to the incorporation of gelatin, elasticity increased significantly, in which concentrations up to 10.0 w/v\% resulted in a certain cohesion of samples after compressive strength testing. They did not dissociate in little pieces but remained intact cuboid specimens though having cracks or fissures. Furthermore, the drug release of two active pharmaceutical ingredients (vancomycin and rifampicin) was investigated over a time frame of 5 weeks. The release exponent was determined according to Korsmeyer-Peppas with n = 0.5 which corresponds to the drug liberation model of Higuchi. A sustained release was observed for the antibiotic vancomycin encapsulated in composites with a gelatin concentration of 10.0 w/v\% and a powder-to-liquid ratio of 2.5 g/mL. With respect to these developments of different dual setting systems, three novel approaches were successfully established by polymerization of monomers and cross-linking of precursors forming an incorporated, homogenous hydrogel matrix in a calcium phosphate network. All studies showed an essential transfer of mechanical performance in direction of flexibility and bendability.}, subject = {Calciumphosphate}, language = {en} } @phdthesis{Li2015, author = {Li, Han}, title = {Fabrication of Carbon Nanotube Thin Films by Evaporation-Induced Self-Assembly}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123407}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {159}, year = {2015}, abstract = {In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies. In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation. In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high. The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water. Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge. In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps. In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays. Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications. Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.}, subject = {Kohlenstoff-Nanor{\"o}hre}, language = {en} } @phdthesis{Ceymann2016, author = {Ceymann, Harald}, title = {Synthesis and Optical Spectroscopic Properties of Squaraine Superchromophores}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136850}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {In this work the successful synthesis, the linear and nonlinear spectroscopic properties as well as the electrochemical behaviour of some linear and star-shaped squaraine superchromophores that are based on indolenine derivatives were presented. The attempt to synthesise similar chromophores which contained only benzothiazole squaraines failed unfortunately. However, one trimer that contained mixed benzothiazole indolenine squaraines could be synthesised and investigated as well. The linear spectroscopic properties, like red-shift and broadening of the absorption, of all superchromophores could be explained by exciton coupling theory. The heterochromophores (SQA)2(SQB)-N, (SQA)(SQB)2-N and (SQA)(SQB)-NH displayed additional to the typical squaraine fluorescence from the lowest excited state some properties that could be assigned to localised states. While the chromophores with N-core showed very small emission quantum yields, the chromophores with the other cores and the linear oligomers display an enhancement compared to the monomers. Transient absorption spectroscopy experiments of the star-shaped superchromophores showed, that their formally degenerated S1 states are split due to a deviation of the ideal C3 symmetry. This is also the reason for the observation of an absorption band for the highest exciton state, which is derived from the S1-state of the monomers, as its transition-dipole moment would be zero in the symmetrical case. The linear oligomers and the star-shaped superchromophores with a benzene or triarylamine core showed at least additive, sometimes even weak cooperative, behaviour in the two-photon absorption experiments. Additional to higher two-photon absorption cross sections the chromophores showed a pronounced broadening of the nonlinear absorption, due to symmetry breaking and a higher density of states. Unfortunately it was not possible to solve the problem of the equilibrium of the cisoid and the transoid structure of donor substituted azulene squaraines, due to either instability of the squaraines or steric hindrance.}, subject = {Squaraine}, language = {en} } @phdthesis{Macha2016, author = {Macha, Bret B.}, title = {Boron-Containing Aromatics as Communicating and Communicative Units in π-Conjugated Systems}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-137498}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2016}, abstract = {Project Borylene A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new "first generation" unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence. Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand's coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state. Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new "second generation" borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively. Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions: [1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex. [2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center. [3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals. Project Borirene The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring. A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions. Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex's photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable. A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species. Project Boratabenzene The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings. This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = -0.84 V, E\(_{1/2}\)(2) = -0.94 V, E\(_{1/2}\)(3) = -2.09 V, and E\(_{1/2}\)(4) = -2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/-1}\), and [(189)]\(^{-1/-2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge. While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes. Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed.}, subject = {Borverbindungen}, language = {en} } @phdthesis{Buschmann2015, author = {Buschmann, Peter}, title = {Anbindung von Katalysatoren an Nanodiamantpartikel mit Hilfe starrer Linker}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-132966}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2015}, abstract = {Das Ziel dieser Arbeit war die Herstellung von Diamantmaterialien, deren Oberfl{\"a}chen mit Alkinen, Aziden oder Aldehyden modifiziert waren. Diese funktionellen Gruppen sollten die einfache Anbindung verschiedener katalytisch aktiver Systeme mit Hilfe der 1,3-dipolaren Cycloaddition nach Huisgen bzw. Iminbildung ermg{\"o}glich. Da in einer vorangegangenen Arbeit Hinweise darauf gefunden wurde, dass die hochgradig funktionalisierte Oberfl{\"a}che von Detonationsnanodiamant dazu in der Lage ist, die Aktivit{\"a}t von immobilisierten Katalysatoren zu behindern. Darum wurde in dieser Arbeit verglichen, ob die Verwendung von starren Linkern auf Tolanbasis einen Vorteil gegen{\"u}ber ihren flexiblen Gegenst{\"u}cken liefert. Dazu wurde f{\"u}r jede der oben genannten Funktionalisierungsarten je ein Diamantmaterial mit flexibler sowie mindestens eines mit unbiegsamer Verbindungseinheit hergestellt und getestet. Dadurch konnte das Konzept der starren Linker f{\"u}r Enzyme best{\"a}tigt werden und es wurde eine signifikant h{\"o}here Aktivit{\"a}t erhalten, als wenn flexible Anbindungsbr{\"u}cken verwendet wurden. Bei Organokatalysatoren und metallorganischen Systemen konnten jedoch keine erfolgreichen Katalysen durchgef{\"u}hrt werden.}, subject = {Nanopartikel}, language = {de} } @phdthesis{Gloza2014, author = {Gloza, Steffi}, title = {Synthese und Charakterisierung von Anthracen- und Anthrachinon-substituierten sternf{\"o}rmigen Mesogenen}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-110595}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Im Rahmen der vorliegenden Arbeit wurden promesogene Arme sowie eine Bibliothek von Sternmesogenen mit Anthracen als Donor- und Anthrachinon als Akzeptorbaustein synthetisiert und untersucht. Ein Schwerpunkt der Arbeit lag auf der Synthese, dem Upscaling, der selektiven Sch{\"u}tzung und weiteren Umsetzung der 2,6-substituierten Anthracen- und Anthrachinon-Chromophore zu den Armbausteinen. Besondere Herausforderungen ergaben sich nicht nur in der Entwicklung einer effizienten Synthesestrategie zur Gewinnung der Chromophore, sondern auch in der Wahl geeigneter Schutzgruppen. Die sternf{\"o}rmigen Verbindungen, die im Rahmen der vorliegenden Arbeit pr{\"a}pariert wurden, enthalten 1,3,5-Trihydroxybenzen (Phloroglucin) als Kerneinheit und sind Multiarmmesogene mit der kleinstm{\"o}glichen Zahl an Armen. Durch geeignete Schutzgruppenstrategien gelang neben den C3-symmetrischen Verbindungen die gezielte Darstellung der C2-symmetrischen und unsymmetrischen Verbindungen. Die Gesamtausbeuten der semiperfluorierten Verbindungen fallen deutlich geringer aus als die der ausschließlich mit Alkylketten dekorierten Derivate, da ihre Isolierung sehr anspruchsvoll ist. Alle Verbindungen bilden ausnahmslos kolumnare Phasen. Semiperfluorierte Ketten wurden eingef{\"u}hrt, um eine Trennung des Donors Anthracen und des Akzeptors Anthrachinon zu erreichen. Die Kolumnendurchmesser sind bei allen kolumnaren Mesophasen wesentlich kleiner als die Durchmesser der sternf{\"o}rmigen Konformere der Mesogene. Angelehnt an die fr{\"u}her untersuchten Oligobenzoatsterne werden Modelle mit gefalteten, E-f{\"o}rmigen Konformeren aufgestellt. So ist es m{\"o}glich, die erforderliche Anzahl an Molek{\"u}len pro Elementarzelle in einer dichten, nanosegregierten Packung anzuordnen. Mit Absorptions- und Emissionsmessungen konnte dieses Modell best{\"a}tigt werden. In allen Donor- und Akzeptor-substituierten Verbindungen wird die Fluoreszenz durch Energietransferprozesse nach F{\"o}rster und Dexter fast vollst{\"a}ndig gel{\"o}scht. Restfluoreszenz wird in dem Bereich beobachtet, der nur noch den Transfer nach Dexter zul{\"a}sst und ist f{\"u}r die Derivate am h{\"o}chsten, die in den E-f{\"o}rmigen Konformeren Donor und Akzeptor am besten trennen k{\"o}nnen. Die Ergebnisse dieser Arbeit zeigen, dass Anthracen- und Anthrachinonderivate eine Vielzahl komplexer zwei- und dreidimensional hochgeordneter kolumnarer Strukturen ausbilden und damit hochinteressant sind als fl{\"u}ssigkristalline organische Halbleitermaterialien.}, subject = {Fl{\"u}ssigkristall}, language = {de} } @phdthesis{Dechant2022, author = {Dechant, Moritz Thomas}, title = {Synthese und Struktur-Eigenschaftsbeziehungen neuer Phthalocyanin-Sternmesogene - Ein neues Design f{\"u}r organische, fl{\"u}ssigkristalline Photovoltaikmaterialien}, doi = {10.25972/OPUS-23888}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-238888}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Es wurde eine Vielzahl neuer, fl{\"u}ssigkristalliner Phthalocyanin-Sternmesogene synthetisiert. Die Struktur-Eigenschaftsbeziehungen und die thermotropen Eigenschaften neuer Phthalocyanin-Sternmesogene mit Freiraum sowie von sterisch {\"u}berfrachteten Verbindungen wurden insbesondere hinsichtlich der Freiraumf{\"u}llung untersucht. Diesbez{\"u}glich wurde ein neuer supramolekularer, freiraumf{\"u}llender "Klick-Prozess" zwischen einem Molek{\"u}l mit Freiraum und einem sterisch {\"u}berfrachteten Molek{\"u}l mit vier Fullerenen beobachtet. Die photophysikalischen Eigenschaften wurden zudem insbesondere im Hinblick auf die Anwendung f{\"u}r die Organische Photovoltaik untersucht.}, subject = {Phthalocyanin}, language = {de} } @phdthesis{Bahndorf2022, author = {Bahndorf, Katrin}, title = {Synthese und Charakterisierung von Aminos{\"a}ure-basierten Amphiphilen und deren Umsetzung zu C\(_3\)-symmetrischen Sternmesogenen - Strukturkontrolle in weicher Materie {\"u}ber Oligopeptidaggregation}, doi = {10.25972/OPUS-25275}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-252753}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {Synthese einer Bibliothek von Aminos{\"a}ure-basierten Oligopeptid-Amphiphilen mittels Festphasensynthese, deren kovalente Kn{\"u}pfung an einen nukleophilen Kern zu C3-symmetrischen Sternmesogenen und die Analyse der Einfl{\"u}sse der verwendeten Aminos{\"a}uren auf die Sekund{\"a}rstruktur des synthetisierten Molek{\"u}ls.}, language = {de} } @phdthesis{Doerrich2014, author = {D{\"o}rrich, Steffen}, title = {Synthese und Charakterisierung neuartiger Silicium-, Germanium- und zinnorganischer Riechstoffe}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-94552}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Aufbauend auf dem Konzept der C/Si-Bioisosterie beschreibt die vorliegende Arbeit die Synthese und Charakterisierung siliciumhaltiger Derivate der Riechstoffe Galaxolide, Lilial, Bourgeonal, 5,7,7-Trimethyl-4-methylenoctanal und α-Galbanone sowie Beitr{\"a}ge zur Synthese eines silicium¬haltigen Derivats von δ-Damascone. Basierend auf der C/Ge- und C/Sn-Bioisosterie wurden zudem die Germa- und Stanna-Analoga von Lilial und Bourgeonal synthetisiert. Die entsprechenden Zielverbindungen sowie alle isolierten Zwischenstufen wurden durch NMR-Spektroskopie (1H, 11B, 13C, 15N, 29Si, 119Sn) und Elementaranalyse (C, H, N) charakterisiert. In einigen F{\"a}llen erfolgte zus{\"a}tzlich eine Charakterisierung durch Einkristall-R{\"o}ntgenstrukturanalyse oder Infrarot-Spektroskopie.}, subject = {Silicium}, language = {de} } @phdthesis{Meininger2022, author = {Meininger, Markus}, title = {Calcium hydroxide as antibacterial implant coating}, doi = {10.25972/OPUS-26112}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-261122}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In modern medicine hip and knee joint replacement are common surgical procedures. However, about 11 \% of hip implants and about 7 \% of knee implants need re-operations. The comparison of implant registers revealed two major indications for re-operations: aseptic loosening and implant infections, that both severely impact the patients' health and are an economic burden for the health care system. To address these problems, a calcium hydroxide coating on titanium was investigated in this thesis. Calcium hydroxide is a well-known antibacterial agent and used with success in dentistry. The coatings were applied with electrochemically assisted deposition, a versatile tool that combines easiness of process with the ability to coat complex geometries homogeneously. The pH-gradient during coating was investigated and showed the surface confinement of the coating process. Surface pre-treatment altered the surface morphology and chemistry of the titanium substrates and was shown to affect the morphology of the calcium hydroxide coatings. The influence of the coating parameters stirring speed and current pulsing were examined in various configurations and combinations and could also affect the surface morphology. A change in surface morphology results in a changed adhesion and behavior of cells and bacteria. Thus, the parameters surface pre-treatment, stirring speed and current pulsing presented a toolset for tailoring cellular response and antibacterial properties. Microbiological tests with S. aureus and S. epidermidis were performed to test the time-dependent antibacterial activity of the calcium hydroxide coatings. A reduction of both strains could be achieved for 13 h, which makes calcium hydroxide a promising antibacterial coating. To give insight into biofilm growth, a protocol for biofilm staining was investigated on titanium disks with S. aureus and S. epidermidis. Biofilm growth could be detected after 5 days of bacterial incubation, which was much earlier than the 3 weeks that are currently assumed in medical treatment. Thus, it should be considered to treat infections as if a biofilm were present from day 5 on. The ephemeral antibacterial properties of calcium hydroxide were further enhanced and prolonged with the addition of silver and copper ions. Both ionic modifications significantly enhanced the bactericidal potential. The copper modification showed higher antibacterial effects than the silver modification and had a higher cytocompatibility which was comparable to the pure calcium hydroxide coating. Thus, copper ions are an auspicious option to enhance the antibacterial properties. Calcium hydroxide coatings presented in this thesis have promising antibacterial properties and can easily be applied to complex geometries, thus they are a step in fighting aseptic loosening and implant infections.}, subject = {Calciumhydroxid}, language = {en} } @phdthesis{BruecknergebChristel2019, author = {Br{\"u}ckner [geb. Christel], Theresa}, title = {Novel application forms and setting mechanisms of mineral bone cements}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-157045}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Calcium phosphate cements (CPC) represent valuable synthetic bone grafts, as they are self-setting, biocompatible, osteoconductive and in their composition similar to the inorganic phase of human bone. Due to their long shelf-life, neutral setting and since water is sufficient for setting, hydroxyapatite (HA) forming cements are processed in different paste formulations. Those comprise dual setting, Ca2+ binding and premixed cement systems. With dual setting formulations, both dissolution and precipitation of the cement raw powder occur simultaneously to the polymerization of water-soluble monomers to form a hydrogel. Chelating agents are able to form complexes with Ca2+ released from the raw powder. Premixed systems mostly contain the raw powder of the cement and a non-aqueous binder liquid which delays the setting reaction until application in the moist physiological environment. In the present work, two of those reaction mechanisms allowed the development of HA based cement applications. Drillable cements are of high clinical interest, as the quality of screw and plate osteosynthesis techniques can be improved by cement augmentation. A drillable, dual setting composite from HA and a poly(2-hydroxyethyl methacrylate) hydrogel was analyzed with respect to the influence of monomer content and powder-to-liquid ratio on setting kinetics and mechanical outcome. While the conversion to HA and crystal growth were constantly confined with increased monomer amount, a minimum concentration of 50 \% was required to see impressive ameliorations including a low bending modulus and high fracture energy at improved bending strength. Increasing the liquid amount enabled injection of the paste as well as drilling after 10 min of pre-setting. While classic bone wax formulations have drawbacks such as infection, inflammation, hindered osteogenesis and a lack of biodegradability, the as-presented premixed formulation is believed to exhibit outmatching properties. It consisted of HA raw powders and a non-aqueous, but water-miscible carrier liquid from poly(ethylene glycol) (PEG). The bone wax was proved to be cohesive and malleable, it withstood blood pressure conditions and among deposition in an aqueous environment, PEG was exchanged such that porous, nanocrystalline HA was formed. Incorporation of a model antibiotic proved the suitability of the novel bone wax formulation for drug release purposes. Prefabricated laminates from premixed carbonated apatite forming cement and poly(ε-caprolactone) fiber mats with defined pore architecture were presented as a potential approach for the treatment of 2-dimensional, curved cranial defects. They are flexible until application and were produced in a layer-by-layer approach from both components such that the polymer scaffold prevents the cement from flowing. It was demonstrated that solution electrospinning with a patterned collector for the fabrication of perforated fiber mats was suitable, as high fiber volume contents in combination with an appropriate interface enabled the successful fabrication of mechanically reinforced laminates. Mild immersion of the scaffolds under alkaline conditions additionally improved the interphase followed by an increase in bending-strength. Since few years, magnesium phosphate cements (MPC) have attracted increasing attention for bone replacement. Compared to CPC, MPC exhibit a higher degradation potential and high early strength and they release biologically valuable Mg2+. However, common systems offer some challenges while using them in non-classic cement formulations such as the need for foreign ion supply, the potential acidity of the reaction or the fast setting kinetics. Here, it was possible to develop a chelate-setting MPC paste with a broad spectrum of potential applications. The general mechanism of the novel setting principle was tested in a proof-of-principle manner. The cement paste consisted of farringtonite with differently concentrated phytic acid solution for chelate formation with Mg2+ from the raw powder. Adjusting the phytic acid content and adding a magnesium oxide as setting regulator to compensate its retarding effect resulted in drillable formulations. Additionally, there is a strong clinical demand for well working bone adhesives especially in a moist environment. Mostly the existing formulations are non-biodegradable. Ex vivo adhesion of the above presented MPC under wet conditions on bone demonstrated over a course of 7 d shear strengths of 0.8 MPa. Further, the hardened cement specimens showed a mass loss of 2 wt.\% within 24 d in an aqueous environment and released about 0.17 mg/g of osteogenic Mg2+ per day. Together with the demonstrated cytocompatibility towards human fetal osteoblasts, this cement system showed promising characteristics in terms of degradable biocements with special application purposes.}, subject = {Knochenzement}, language = {en} } @phdthesis{HerbstgebHoehne2019, author = {Herbst [geb. H{\"o}hne], Stefanie}, title = {Liquid Crystalline Perylene Bisimide Assemblies}, doi = {10.25972/OPUS-16485}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-164857}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {Thus, the main focus of this thesis was to generate and investigate new one-dimensional LC PBI J-aggregates of an entirely new PBI organization with the transition dipole moments of the chromophores arranged parallel to the columnar axis and in slipped pi-pi stacking fashion to form highly fluorescent J-aggregates. Towards this goal, the tetra-bay substituted PBI 4c bearing free NH functional groups at the imide positions and four dendrons with branched ethylhexyl alkoxy chains at the meta-position of the phenoxy spacer (Figure 8.1a) was synthesized and compared to a literature known reference PBI 1. The mesogenic dendrons ensure LC character of the dye, which was confirmed by POM, DSC and extensive X-ray analysis. Furthermore, the sterically demanding bay-substituents prevent the cofacial assembly of the chromophores and force the dyes into a slipped pi-stacked order with the main transition dipole moments of the dyes oriented parallel to the columnar axis. X-ray analysis revealed that PBI 4c assembles into columnar triple-stranded helices consisting of side-to-side stacked molecules, which organize into a Colh phase (Figure 8.1b). FT-IR experiments of a thin film and aggregates in MCH solution confirmed the formation of H-bonds between the imide moieties. Temperature-dependent investigations furthermore proved a reversible formation of H-bonds and polarized FT-IR experiments finally gave evidence for the direction of the H-bonds along the shearing respective the columnar axis (Figure 8.1c). This was additionally verified by polarized UV-Vis absorption studies of aligned thin films. The changes in the UV-Vis absorption spectra of concentration- and temperature-dependent experiments in MCH are in agreement with the formation of J-aggregates and could be fitted to a nucleation-elongation growth mechanism. Remarkably, fluorescence spectroscopy studies revealed highly emissive aggregates in solution. These various spectroscopic techniques proved the utilization of directional noncovalent forces like hydrogen-bonding and pi-pi interactions in a cooperative manner forcing the PBI molecules in an unprecedented organization of a slipped pi-stacked arrangement with the orientation of the molecular axis and the respective transition dipole moments parallel to the columns of the LC phase. By the group of Dietrich the formation of exciton-polaritons in imprinted LC pillar microcavities as consequent use of the LC 4c was reported for the first time.In the second part of this thesis the hierarchical organization of LC PBIs into defined single-, double-, triple- and quadruple-stranded J-aggregates within crystalline and columnar LC phases, partially arranged in helical supramolecular structures in dependence of the molecular design was demonstrated. This was achieved via the preparation of a library of twelve molecules PBI 3-6(a-c) (Figure 8.2a) that was synthesized by varying the substitution position of the dendrons at the phenoxy-spacer from ortho to meta or para and by introducing an additional methyl group in ortho-position. Also the length and shape of the alkoxy chains was changed. Consequently, the impact of the sterical demand of the bay substituents concerning their phase properties, molecular arrangement and exciton coupling was investigated. POM, DSC and X-ray studies revealed the formation of only crystalline phase for the ortho-substituted PBIs 3a-c, whereas the other derivatives generated SC or LC phases. The main focus was the series with the n-C12-alkoxy chains. For the corresponding PBIs 4-6b columnar LC phases were confirmed. Retrostructural analysis by modelling and simulations gave indications for a single stranded organization for PBI 3b, a double-stranded helix for PBI 6b, a triple-stranded helical arrangement for PBI 5b and a quadruple-stranded helix for PBI 4b (Figure 8.2b-d). For all four derivatives the same molecular orientation within the columns as for PBI 4c was proven by polarized FT-IR and UV-Vis absorption studies in aligned thin films. The organization in helices of different number of strands in the Cr and LC phases of PBI 3b, 4b, 5b and 6b offered a unique possibility to elucidate the influence of particular packing arrangements on dye aggregate interactions with light. In particular, it can be investigated how exciton coupling of the dyes' transition dipole moments and fluorescence properties are affected. In this context, the spectroscopic properties were investigated in thin film, which revealed a strong bathochromic shift of the absorption maxima compared to the monomers in solution in dependence on the number of strands for PBIs 4-6b in contrast to PBI 3b (Figure 8.2e). The same tendency was observed for the respective aggregates in MCH solution. The spectral changes obtained during concentration- and temperature-dependent UV-Vis absorption studies verified the formation of J-aggregates in MCH solution and solid state. The respective aggregates are highly likely formed via a nucleation-elongation growth mechanism. Appliance of Kasha's exciton theory on the supramolecular aggregates revealed different contributions of H- and J-type coupling for the oligo-stranded helices. Under these considerations, it delivered an explanation for the absorption and fluorescence properties of the assemblies and declares the "best" J-aggregate for the double stranded arrangement of PBI 6b with purely negative couplings among neighbour molecules and a quantum yield above 74 \% of the aggregates in MCH solution. With this H-bonded PBI-based library approach of twelve derivatives it could be shown how molecular engineering of perylene bisimide dyes can be used to design defined, complex supramolecular assemblies with unprecedented packing patterns and concomitant intriguing spectroscopic properties. So far, the formation of defined liquid crystalline supramolecular structures of tetra-bay substituted PBIs by double H-bonding between free imide moieties and pi-pi interactions between the chromophores was demonstrated. The impact of the H-bonds on the molecular arrangement was investigated in the next part of this thesis. In this regard, PBIs 7 and 8 bearing a methyl or cyclohexyl group at the imide position (Figure 8.3a) were synthesized and compared to PBI 4c. The soft character of the solid state for PBIs 7 and 8 was confirmed by POM, DSC and X-ray analysis. The X-ray studies further revealed for both PBIs a change of the molecular assembly towards helical columnar structures of conventional pi-stacked chromophores (Figure 8.3b) when the directed H-bonds cannot contribute as noncovalent interactions to the assembly formation. Temperature-dependent UV-Vis absorption studies demonstrated the importance of H-bonding in MCH solution in the way that the formation of J-aggregates as for PBI 4c could not be observed for the imide substituted molecules. In the next step, the spectroscopic properties in thin film were investigated. For PBI 7 a J-type band and fluorescence spectra with an enlarged Stokes shift and increased fluorescence lifetime of 11.4 ns, compared to PBI 4c, was obtained, suggesting the generation of excimer type emission by considering the assumed conventional stacking of rotational displaced molecules from X-ray analysis. With polarized UV-Vis absorption experiments the orientation of the molecules perpendicular to the shearing direction and subsequently to the columnar axis was confirmed. These diverse investigations clearly demonstrated the imperative of H-bonds for stable, defined, LC J-aggregates with the transition dipole moments parallel to the columnar axis. With PBIs 7 and 8 it is impressively shown how small changes in the molecular structure influence the molecular arrangement dependent on the cooperation of non-covalent interactions like H-bonding and pi-pi stacking. In the last part of this thesis the generation of two-dimensional LC arrangements is presented. Since tetra-bay substituted PBIs lead always to twisted cores preventing lamellar arrangement, here 1,7-disubstitution and the simultaneous retention of the free imide positions was chosen to generate LC lamellar phases of PBIs 9a, 9b and 10 (Figure 8.4a). This molecular design was expected to form planar perylene cores that can strongly interact by pi-pi stacking and H-bonding. POM, DSC and X-ray investigations of the compounds suggest lamellar LC phases for PBIs 9a and 9b and a soft phase for PBI 10. In this regard, the goal of the formation of LC lamellar phase of PBIs could be attained. The change from dendrons with n-C12-alkoxy chains to large fork-like mesogens like in 9b clearly changed the phase properties. PBI 9b exhibits the lowest clearing point, high phase stability, least viscosity, easy shearability at room temperature and phase transitions between lamellar and Colh phases dependent on temperature. The formation of H-bonds parallel to the layers was demonstrated by polarized FT-IR experiments for all three PBIs. Concentration-dependent UV-Vis absorption studies revealed the formation of a J-type aggregate, which seems to exhibit an overall two-dimensional structure. With STM investigations the formation of lamellar structures from drop-casted 9a and 10 solutions in 1-phenyloctane on HOPG surface could be observed. Figure 8.4b illustrates a schematic possible arrangement of the molecules in the layers (here exemplarily demonstrated for PBI 9a), which has to be further confirmed by modelling and simulations. Unfortunately, fluorescence investigations of the thin films revealed non- or only slightly emissive LC states, which make them negligible for photonic applications. Nevertheless, the synthesized and analyzed compounds might be an inspiration for further investigations on the path to two-dimensional exciton transport for photonic devices.}, subject = {Fl{\"u}ssigkristall}, language = {en} } @phdthesis{HechtgebWagener2019, author = {Hecht [geb. Wagener], Reinhard Johannes}, title = {Processing and Characterization of Bulk Heterojunction Solar Cells Based on New Organic n-Type Semiconductors}, doi = {10.25972/OPUS-16138}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-161385}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2019}, abstract = {This thesis established the fabrication of organic solar cells of DA dye donors and fullerene acceptors under ambient conditions in our laboratory, however, with reduced power conversion efficiencies compared to inert conditions. It was shown that moisture had the strongest impact on the stability and reproducibility of the solar cells. Therefore, utilization of robust materials, inverted device architectures and fast fabrication/characterization are recommended if processing takes place in air. Furthermore, the dyad concept was successfully explored in merocyanine dye-fullerene dyads and power conversion efficiencies of up to 1.14 \% and 1.59 \% were measured under ambient and inert conditions, respectively. It was determined that the major drawback in comparison to comparable BHJ devices was the inability of the dyad molecules to undergo phase separation. Finally, two series of small molecules were designed in order to obtain electron transport materials, using the acceptor-core-acceptor motive. By variation of the acceptor units especially the LUMO levels could be lowered effectively. Investigation of the compounds in organic thin film transistors helped to identify promising molecules with electron transport properties. Electron transport mobilities of up to 7.3 × 10-2 cm2 V-1 s-1 (ADA2b) and 1.39 × 10-2 cm2 V-1 s-1 (AπA1b) were measured in air for the ADA and AπA dyes, respectively. Investigation of selected molecules in organic solar cells proved that these molecules work as active layer components, even though power conversion efficiencies cannot compete with fullerene based devices yet. Thus, this thesis shows new possibilities that might help to develop and design small molecules as substitutes for fullerene acceptors.}, subject = {Heterosolarzelle}, language = {en} } @phdthesis{Muzha2022, author = {Muzha, Andreas}, title = {Herstellung und Charakterisierung kolloidaler L{\"o}sungen diamantbasierter und verwandter Materialien}, doi = {10.25972/OPUS-29668}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-296685}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2022}, abstract = {In der vorliegenden Publikation wurden stabile kolloidale L{\"o}sungen aus CVD-Diamant, Detonationsdiamant sowie artverwandten Materialien hergestellt und charakterisiert Besonderes Augenmerk wurde bei der Zerkleinerung von CVD Diamant daraufgelegt, dass die nanoskaligen Partikel ihre materialspezifischen Eigenschaften auch bei Reduktion der Gr{\"o}ße beibehalten. Systematisch wurde die Zerkleinerung in einer Planetenm{\"u}hle analysiert. Es wurde sowohl die minimal erreichbare Partikelgr{\"o}ße, als auch die Menge an erzeugtem, nanoskaligem Material bewertet. Um die Vermahlung zu verbessern, wurden die Geschwindigkeit der M{\"u}hle, die Gr{\"o}ße der Mahlk{\"o}rper, die Dauer der Vermahlung, sowie die eingesetzten L{\"o}semittel variiert. Des Weiteren konnten durch die Vermahlung unterschiedlich hergestellter CVD Diamantfilme in einer Vibrationsm{\"u}hle die Einfl{\"u}sse von Schichtdicke und Korngr{\"o}ße der Diamantkristalle untersucht werden. Durch Bearbeitung von Detonationsdiamanten und Kohlenstoffnanozwiebeln wurden stabile kolloidale L{\"o}sungen hergestellt, mit Partikelgr{\"o}ßen im unteren Nanometerbereich. Diese sind im alkalischen pH-Bereich stabil sein, hierf{\"u}r wurde durch Luft und S{\"a}ureoxidation oxidierter Detonationsdiamant und oxidierte Kohlenstoffnanozwiebeln hergestellt. Mithilfe der thermogravimetrischen Analyse und Infrarotspektroskopie wurde die hierf{\"u}r optimale Temperatur und Dauer bestimmt.}, subject = {Diamant}, language = {de} } @phdthesis{GamachegebRupp2021, author = {Gamache [geb. Rupp], Mira Theresa}, title = {Ligand Design for Ru(II) Photosensitizers in Photocatalytic Hydrogen Evolution}, doi = {10.25972/OPUS-24676}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-246766}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {This thesis investigates different ligand designs for Ru(II) complexes and the activity of the complexes as photosensitizer (PS) in photocatalytic hydrogen evolution. The catalytic system typically contains a catalyst, a sacrificial electron donor (SED) and a PS, which needs to exhibit strong absorption and luminescence, as well as reversible redox behavior. Electron-withdrawing pyridine substituents on the terpyridine metal ion receptor result in an increase of excited-state lifetime and quantum yield (Φ = 74*10-5; τ = 3.8 ns) and lead to complex III-C1 exhibiting activity as PS. While the turn-over frequency (TOFmax) and turn-over number (TON) are relatively low (TOFmax = 57 mmolH2 molPS-1 min-1; TON(44 h) = 134 mmolH2 molPS-1), the catalytic system is long-lived, losing only 20\% of its activity over the course of 12 days. Interestingly, the heteroleptic design in III-C1 proves to be beneficial for the performance as PS, despite III-C1 having comparable photophysical and electrochemical properties as the homoleptic complex IV-C2 (TOFmax = 35 mmolH2 molPS-1 min-1; TON(24 h) = 14 mmolH2 molPS-1). Reductive quenching of the excited PS by the SED is identified as rate-limiting step in both cases. Hence, the ligands are designed to be more electron-accepting either via N-methylation of the peripheral pyridine substituents or introduction of a pyrimidine ring in the metal ion receptor, leading to increased excited-state lifetimes (τ = 9-40 ns) and luminescence quantum yields (Φ = 40-400*10-5). However, the more electron-accepting character of the ligands also results in anodically shifted reduction potentials, leading to a lack of driving force for the electron transfer from the reduced PS to the catalyst. Hence, this electron transfer step is found to be a limiting factor to the overall performance of the PS. While higher TOFmax in hydrogen evolution experiments are observed for pyrimidine-containing PS (TOFmax = 300-715 mmolH2 molPS-1 min-1), the longevity for these systems is reduced with half-life times of 2-6 h. Expansion of the pyrimidine-containing ligands to dinuclear complexes yields a stronger absorptivity (ε = 100-135*103 L mol-1 cm-1), increased luminescence (τ = 90-125 ns, Φ = 210-350*10-5) and can also result in higher TOFmax given sufficient driving force for electron transfer to the catalyst (TOFmax = 1500 mmolH2 molPS-1 min-1). When comparing complexes with similar driving forces, stronger luminescence is reflected in a higher TOFmax. Besides thermodynamic considerations, kinetic effects and electron transfer efficiency are assumed to impact the observed activity in hydrogen evolution. In summary, this work shows that targeted ligand design can make the previously disregarded group of Ru(II) complexes with tridentate ligands attractive candidates for use as PS in photocatalytic hydrogen evolution.}, subject = {Fotokatalyse}, language = {en} } @phdthesis{Roos2021, author = {Roos, Markus}, title = {Synthesis, Photophysics and Photocatalysis of [FeFe] Complex Containing Dyads and Bimolecular Systems}, doi = {10.25972/OPUS-23453}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-234537}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2021}, abstract = {In the course of this work, a total of three photocatalytically active dyads for proton reduction could be synthesized together with the associated individual components. Two of them, D1 and D2, comprised a [Ru(bpy)3]2+ photosensitizer and D3 an [Ir(ppy)2bpy]+ photosensitizer. A Ppyr3-substituted propyldithiolate [FeFe] complex was used as catalyst in all systems. The absorption spectroscopic and electrochemical investigations showed that an inner-dyadic electronic coupling is effectively prevented in the dyads due to conjugation blockers within the bridging units used. The photocatalytic investigations exhibited that all dyad containing two-component systems (2CS) showed a significantly worse performance than the corresponding bimolecular three-component systems (3CS). Transient absorption spectroscopy showed that the 2CS behave very similarly to the associated multicomponent systems during photocatalysis. The electron that was intended for the intramolecular transfer from the photosensitizer unit to the catalyst unit within the dyads remains at the photosensitizer for a relatively long time, analogous to the 3CS and despite the covalently bound catalyst. It is therefore assumed that this intramolecular electron transfer is likely to be hindered as a result of the weak electronic coupling caused by the bridge units used. Instead, the system bypasses this through an intermolecular transfer to other dyad molecules in the immediate vicinity. In addition, with the help of emission quenching experiments and electrochemical investigations, it could be clearly concluded that all investigated systems proceed via the reductive quenching mechanism during photocatalysis.}, subject = {Fotokatalyse}, language = {en} } @phdthesis{Rang2023, author = {Rang, Maximilian}, title = {Metall{\"a}hnliche Reaktivit{\"a}t \(in\) \(situ\) erzeugter Borylene}, doi = {10.25972/OPUS-24046}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-240465}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Einfach Lewis-Basen stabilisierte Borylene wurden durch Reduktion in situ hergestellt und in Gegenwart von Kohlenstoffmonoxid oder Distickstoff umgesetzt. Die entstandenen Verbindungen wurden mittels NMR-, ESR-, UV/Vis- und IR-Spektroskopie sowie Einkristallr{\"o}ntgenstrukturanalyse charakterisiert. Im Zuge dessen konnten f{\"u}r die erhaltenen Spezies Eigenschaften ermittelt werden, die denen analoger {\"U}bergangsmetallkomplexe {\"a}hneln. Ferner konnten die zugrundeliegenden mechanistischen Vorg{\"a}nge der Reaktionen durch gezielte Variation der Reaktionsparameter aufgekl{\"a}rt werden. Zudem wurden Redoxverhalten und Reaktivit{\"a}ten der isolierten Produkte in weiterf{\"u}hrenden Studien n{\"a}her untersucht.}, subject = {Bor}, language = {de} }