@phdthesis{Klein2014, author = {Klein, Dominik Werner}, title = {Design and Evaluation of Components for Future Internet Architectures}, issn = {1432-8801}, doi = {10.25972/OPUS-9313}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-93134}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {Die derzeitige Internetarchitektur wurde nicht in einem geplanten Prozess konzipiert und entwickelt, sondern hat vielmehr eine evolutionsartige Entwicklung hinter sich. Ausl{\"o}ser f{\"u}r die jeweiligen Evolutionsschritte waren dabei meist aufstrebende Anwendungen, welche neue Anforderungen an die zugrundeliegende Netzarchitektur gestellt haben. Um diese Anforderungen zu erf{\"u}llen, wurden h{\"a}ufig neuartige Dienste oder Protokolle spezifiziert und in die bestehende Architektur integriert. Dieser Prozess ist jedoch meist mit hohem Aufwand verbunden und daher sehr tr{\"a}ge, was die Entwicklung und Verbreitung innovativer Dienste beeintr{\"a}chtigt. Derzeitig diskutierte Konzepte wie Software-Defined Networking (SDN) oder Netzvirtualisierung (NV) werden als eine M{\"o}glichkeit angesehen, die Altlasten der bestehenden Internetarchitektur zu l{\"o}sen. Beiden Konzepten gemein ist die Idee, logische Netze {\"u}ber dem physikalischen Substrat zu betreiben. Diese logischen Netze sind hochdynamisch und k{\"o}nnen so flexibel an die Anforderungen der jeweiligen Anwendungen angepasst werden. Insbesondere erlaubt das Konzept der Virtualisierung intelligentere Netzknoten, was innovative neue Anwendungsf{\"a}lle erm{\"o}glicht. Ein h{\"a}ufig in diesem Zusammenhang diskutierter Anwendungsfall ist die Mobilit{\"a}t sowohl von Endger{\"a}ten als auch von Diensten an sich. Die Mobilit{\"a}t der Dienste wird hierbei ausgenutzt, um die Zugriffsverz{\"o}gerung oder die belegten Ressourcen im Netz zu reduzieren, indem die Dienste zum Beispiel in f{\"u}r den Nutzer geographisch nahe Datenzentren migriert werden. Neben den reinen Mechanismen bez{\"u}glich Dienst- und Endger{\"a}temobilit{\"a}t sind in diesem Zusammenhang auch geeignete {\"U}berwachungsl{\"o}sungen relevant, welche die vom Nutzer wahrgenommene Dienstg{\"u}te bewerten k{\"o}nnen. Diese L{\"o}sungen liefern wichtige Entscheidungshilfen f{\"u}r die Migration oder {\"u}berwachen m{\"o}gliche Effekte der Migration auf die erfahrene Dienstg{\"u}te beim Nutzer. Im Falle von Video Streaming erm{\"o}glicht ein solcher Anwendungsfall die flexible Anpassung der Streaming Topologie f{\"u}r mobile Nutzer, um so die Videoqualit{\"a}t unabh{\"a}ngig vom Zugangsnetz aufrechterhalten zu k{\"o}nnen. Im Rahmen dieser Doktorarbeit wird der beschriebene Anwendungsfall am Beispiel einer Video Streaming Anwendung n{\"a}her analysiert und auftretende Herausforderungen werden diskutiert. Des Weiteren werden L{\"o}sungsans{\"a}tze vorgestellt und bez{\"u}glich ihrer Effizienz ausgewertet. Im Detail besch{\"a}ftigt sich die Arbeit mit der Leistungsanalyse von Mechanismen f{\"u}r die Dienstmobilit{\"a}t und entwickelt eine Architektur zur Optimierung der Dienstmobilit{\"a}t. Im Bereich Endger{\"a}temobilit{\"a}t werden Verbesserungen entwickelt, welche die Latenz zwischen Endger{\"a}t und Dienst reduzieren oder die Konnektivit{\"a}t unabh{\"a}ngig vom Zugangsnetz gew{\"a}hrleisten. Im letzten Teilbereich wird eine L{\"o}sung zur {\"U}berwachung der Videoqualit{\"a}t im Netz entwickelt und bez{\"u}glich ihrer Genauigkeit analysiert.}, subject = {Leistungsbewertung}, language = {en} } @phdthesis{Fink2014, author = {Fink, Martin}, title = {Crossings, Curves, and Constraints in Graph Drawing}, publisher = {W{\"u}rzburg University Press}, isbn = {978-3-95826-002-3 (print)}, doi = {10.25972/WUP-978-3-95826-003-0}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-98235}, school = {W{\"u}rzburg University Press}, pages = {222}, year = {2014}, abstract = {In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs. For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion.}, subject = {Graphenzeichnen}, language = {en} } @phdthesis{Jarschel2014, author = {Jarschel, Michael}, title = {An Assessment of Applications and Performance Analysis of Software Defined Networking}, issn = {1432-8801}, doi = {10.25972/OPUS-10079}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-100795}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2014}, abstract = {With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse. For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user's "Quality of Experience" (QoE). The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation. Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures. Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range. Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology. The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service. Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application "YouTube video streaming" was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances.}, subject = {Leistungsbewertung}, language = {en} } @phdthesis{Hock2014, author = {Hock, David Rog{\´e}r}, title = {Analysis and Optimization of Resilient Routing in Core Communication Networks}, issn = {1432-8801}, doi = {10.25972/OPUS-10168}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-101681}, school = {Universit{\"a}t W{\"u}rzburg}, pages = {175}, year = {2014}, abstract = {Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more. Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures. The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values. The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort. Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible.}, subject = {Leistungsbewertung}, language = {en} } @phdthesis{Driewer2008, author = {Driewer, Frauke}, title = {Teleoperation Interfaces in Human-Robot Teams}, isbn = {978-3-923959-57-0}, doi = {10.25972/OPUS-2955}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-36351}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2008}, abstract = {Diese Arbeit besch{\"a}ftigt sich mit der Verbesserung von Mensch-Roboter Interaktion in Mensch-Roboter Teams f{\"u}r Teleoperation Szenarien, wie z.B. robotergest{\"u}tzte Feuerwehreins{\"a}tze. Hierbei wird ein Konzept und eine Architektur f{\"u}r ein System zur Unterst{\"u}tzung von Teleoperation von Mensch-Roboter Teams vorgestellt. Die Anforderungen an Informationsaustausch und -verarbeitung, insbesondere f{\"u}r die Anwendung Rettungseinsatz, werden ausgearbeitet. Weiterhin wird das Design der Benutzerschnittstellen f{\"u}r Mensch-Roboter Teams dargestellt und Prinzipien f{\"u}r Teleoperation-Systeme und Benutzerschnittstellen erarbeitet. Alle Studien und Ans{\"a}tze werden in einem Prototypen-System implementiert und in verschiedenen Benutzertests abgesichert. Erweiterungsm{\"o}glichkeiten zum Einbinden von 3D Sensordaten und die Darstellung auf Stereovisualisierungssystemen werden gezeigt.}, subject = {Robotik}, language = {en} } @phdthesis{Hess2009, author = {Hess, Martin}, title = {Motion coordination and control in systems of nonholonomic autonomous vehicles}, isbn = {978-3-923959-55-6}, doi = {10.25972/OPUS-3794}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-46442}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2009}, abstract = {This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles.}, subject = {Robotik}, language = {en} } @phdthesis{Somody2023, author = {Somody, Joseph Christian Campbell}, title = {Leveraging deep learning for identification and structural determination of novel protein complexes from \(in\) \(situ\) electron cryotomography of \(Mycoplasma\) \(pneumoniae\)}, doi = {10.25972/OPUS-31344}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-313447}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {The holy grail of structural biology is to study a protein in situ, and this goal has been fast approaching since the resolution revolution and the achievement of atomic resolution. A cell's interior is not a dilute environment, and proteins have evolved to fold and function as needed in that environment; as such, an investigation of a cellular component should ideally include the full complexity of the cellular environment. Imaging whole cells in three dimensions using electron cryotomography is the best method to accomplish this goal, but it comes with a limitation on sample thickness and produces noisy data unamenable to direct analysis. This thesis establishes a novel workflow to systematically analyse whole-cell electron cryotomography data in three dimensions and to find and identify instances of protein complexes in the data to set up a determination of their structure and identity for success. Mycoplasma pneumoniae is a very small parasitic bacterium with fewer than 700 protein-coding genes, is thin enough and small enough to be imaged in large quantities by electron cryotomography, and can grow directly on the grids used for imaging, making it ideal for exploratory studies in structural proteomics. As part of the workflow, a methodology for training deep-learning-based particle-picking models is established. As a proof of principle, a dataset of whole-cell Mycoplasma pneumoniae tomograms is used with this workflow to characterize a novel membrane-associated complex observed in the data. Ultimately, 25431 such particles are picked from 353 tomograms and refined to a density map with a resolution of 11 {\AA}. Making good use of orthogonal datasets to filter search space and verify results, structures were predicted for candidate proteins and checked for suitable fit in the density map. In the end, with this approach, nine proteins were found to be part of the complex, which appears to be associated with chaperone activity and interact with translocon machinery. Visual proteomics refers to the ultimate potential of in situ electron cryotomography: the comprehensive interpretation of tomograms. The workflow presented here is demonstrated to help in reaching that potential.}, subject = {Kryoelektronenmikroskopie}, language = {en} } @phdthesis{Bleier2023, author = {Bleier, Michael}, title = {Underwater Laser Scanning - Refractive Calibration, Self-calibration and Mapping for 3D Reconstruction}, isbn = {978-3-945459-45-4}, doi = {10.25972/OPUS-32269}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-322693}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {There is great interest in affordable, precise and reliable metrology underwater: Archaeologists want to document artifacts in situ with high detail. In marine research, biologists require the tools to monitor coral growth and geologists need recordings to model sediment transport. Furthermore, for offshore construction projects, maintenance and inspection millimeter-accurate measurements of defects and offshore structures are essential. While the process of digitizing individual objects and complete sites on land is well understood and standard methods, such as Structure from Motion or terrestrial laser scanning, are regularly applied, precise underwater surveying with high resolution is still a complex and difficult task. Applying optical scanning techniques in water is challenging due to reduced visibility caused by turbidity and light absorption. However, optical underwater scanners provide significant advantages in terms of achievable resolution and accuracy compared to acoustic systems. This thesis proposes an underwater laser scanning system and the algorithms for creating dense and accurate 3D scans in water. It is based on laser triangulation and the main optical components are an underwater camera and a cross-line laser projector. The prototype is configured with a motorized yaw axis for capturing scans from a tripod. Alternatively, it is mounted to a moving platform for mobile mapping. The main focus lies on the refractive calibration of the underwater camera and laser projector, the image processing and 3D reconstruction. For highest accuracy, the refraction at the individual media interfaces must be taken into account. This is addressed by an optimization-based calibration framework using a physical-geometric camera model derived from an analytical formulation of a ray-tracing projection model. In addition to scanning underwater structures, this work presents the 3D acquisition of semi-submerged structures and the correction of refraction effects. As in-situ calibration in water is complex and time-consuming, the challenge of transferring an in-air scanner calibration to water without re-calibration is investigated, as well as self-calibration techniques for structured light. The system was successfully deployed in various configurations for both static scanning and mobile mapping. An evaluation of the calibration and 3D reconstruction using reference objects and a comparison of free-form surfaces in clear water demonstrate the high accuracy potential in the range of one millimeter to less than one centimeter, depending on the measurement distance. Mobile underwater mapping and motion compensation based on visual-inertial odometry is demonstrated using a new optical underwater scanner based on fringe projection. Continuous registration of individual scans allows the acquisition of 3D models from an underwater vehicle. RGB images captured in parallel are used to create 3D point clouds of underwater scenes in full color. 3D maps are useful to the operator during the remote control of underwater vehicles and provide the building blocks to enable offshore inspection and surveying tasks. The advancing automation of the measurement technology will allow non-experts to use it, significantly reduce acquisition time and increase accuracy, making underwater metrology more cost-effective.}, subject = {Selbstkalibrierung}, language = {en} } @phdthesis{Krenzer2023, author = {Krenzer, Adrian}, title = {Machine learning to support physicians in endoscopic examinations with a focus on automatic polyp detection in images and videos}, doi = {10.25972/OPUS-31911}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319119}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {Deep learning enables enormous progress in many computer vision-related tasks. Artificial Intel- ligence (AI) steadily yields new state-of-the-art results in the field of detection and classification. Thereby AI performance equals or exceeds human performance. Those achievements impacted many domains, including medical applications. One particular field of medical applications is gastroenterology. In gastroenterology, machine learning algorithms are used to assist examiners during interventions. One of the most critical concerns for gastroenterologists is the development of Colorectal Cancer (CRC), which is one of the leading causes of cancer-related deaths worldwide. Detecting polyps in screening colonoscopies is the essential procedure to prevent CRC. Thereby, the gastroenterologist uses an endoscope to screen the whole colon to find polyps during a colonoscopy. Polyps are mucosal growths that can vary in severity. This thesis supports gastroenterologists in their examinations with automated detection and clas- sification systems for polyps. The main contribution is a real-time polyp detection system. This system is ready to be installed in any gastroenterology practice worldwide using open-source soft- ware. The system achieves state-of-the-art detection results and is currently evaluated in a clinical trial in four different centers in Germany. The thesis presents two additional key contributions: One is a polyp detection system with ex- tended vision tested in an animal trial. Polyps often hide behind folds or in uninvestigated areas. Therefore, the polyp detection system with extended vision uses an endoscope assisted by two additional cameras to see behind those folds. If a polyp is detected, the endoscopist receives a vi- sual signal. While the detection system handles the additional two camera inputs, the endoscopist focuses on the main camera as usual. The second one are two polyp classification models, one for the classification based on shape (Paris) and the other on surface and texture (NBI International Colorectal Endoscopic (NICE) classification). Both classifications help the endoscopist with the treatment of and the decisions about the detected polyp. The key algorithms of the thesis achieve state-of-the-art performance. Outstandingly, the polyp detection system tested on a highly demanding video data set shows an F1 score of 90.25 \% while working in real-time. The results exceed all real-time systems in the literature. Furthermore, the first preliminary results of the clinical trial of the polyp detection system suggest a high Adenoma Detection Rate (ADR). In the preliminary study, all polyps were detected by the polyp detection system, and the system achieved a high usability score of 96.3 (max 100). The Paris classification model achieved an F1 score of 89.35 \% which is state-of-the-art. The NICE classification model achieved an F1 score of 81.13 \%. Furthermore, a large data set for polyp detection and classification was created during this thesis. Therefore a fast and robust annotation system called Fast Colonoscopy Annotation Tool (FastCAT) was developed. The system simplifies the annotation process for gastroenterologists. Thereby the i gastroenterologists only annotate key parts of the endoscopic video. Afterward, those video parts are pre-labeled by a polyp detection AI to speed up the process. After the AI has pre-labeled the frames, non-experts correct and finish the annotation. This annotation process is fast and ensures high quality. FastCAT reduces the overall workload of the gastroenterologist on average by a factor of 20 compared to an open-source state-of-art annotation tool.}, subject = {Deep Learning}, language = {en} } @phdthesis{Huber2023, author = {Huber, Stephan}, title = {Proxemo: Documenting Observed Emotions in HCI}, doi = {10.25972/OPUS-30573}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-305730}, school = {Universit{\"a}t W{\"u}rzburg}, year = {2023}, abstract = {For formative evaluations of user experience (UX) a variety of methods have been developed over the years. However, most techniques require the users to interact with the study as a secondary task. This active involvement in the evaluation is not inclusive of all users and potentially biases the experience currently being studied. Yet there is a lack of methods for situations in which the user has no spare cognitive resources. This condition occurs when 1) users' cognitive abilities are impaired (e.g., people with dementia) or 2) users are confronted with very demanding tasks (e.g., air traffic controllers). In this work we focus on emotions as a key component of UX and propose the new structured observation method Proxemo for formative UX evaluations. Proxemo allows qualified observers to document users' emotions by proxy in real time and then directly link them to triggers. Technically this is achieved by synchronising the timestamps of emotions documented by observers with a video recording of the interaction. In order to facilitate the documentation of observed emotions in highly diverse contexts we conceptualise and implement two separate versions of a documentation aid named Proxemo App. For formative UX evaluations of technology-supported reminiscence sessions with people with dementia, we create a smartwatch app to discreetly document emotions from the categories anger, general alertness, pleasure, wistfulness and pride. For formative UX evaluations of prototypical user interfaces with air traffic controllers we create a smartphone app to efficiently document emotions from the categories anger, boredom, surprise, stress and pride. Descriptive case studies in both application domains indicate the feasibility and utility of the method Proxemo and the appropriateness of the respectively adapted design of the Proxemo App. The third part of this work is a series of meta-evaluation studies to determine quality criteria of Proxemo. We evaluate Proxemo regarding its reliability, validity, thoroughness and effectiveness, and compare Proxemo's efficiency and the observers' experience to documentation with pen and paper. Proxemo is reliable, as well as more efficient, thorough and effective than handwritten notes and provides a better UX to observers. Proxemo compares well with existing methods where benchmarks are available. With Proxemo we contribute a validated structured observation method that has shown to meet requirements formative UX evaluations in the extreme contexts of users with cognitive impairments or high task demands. Proxemo is agnostic regarding researchers' theoretical approaches and unites reductionist and holistic perspectives within one method. Future work should explore the applicability of Proxemo for further domains and extend the list of audited quality criteria to include, for instance, downstream utility. With respect to basic research we strive to better understand the sources leading observers to empathic judgments and propose reminisce and older adults as model environment for investigating mixed emotions.}, subject = {Gef{\"u}hl}, language = {en} }