@phdthesis{Klein2014,
  author    = {Klein, Dominik Werner},
  title     = {Design and Evaluation of Components for Future Internet Architectures},
  issn      = {1432-8801},
  doi       = {10.25972/OPUS-9313},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-93134},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2014},
  abstract  = {Die derzeitige Internetarchitektur wurde nicht in einem geplanten Prozess konzipiert und entwickelt, sondern hat vielmehr eine evolutionsartige Entwicklung hinter sich. Ausl{\"o}ser f{\"u}r die jeweiligen Evolutionsschritte waren dabei meist aufstrebende Anwendungen, welche neue Anforderungen an die zugrundeliegende Netzarchitektur gestellt haben. Um diese Anforderungen zu erf{\"u}llen, wurden h{\"a}ufig neuartige Dienste oder Protokolle spezifiziert und in die bestehende Architektur integriert. Dieser Prozess ist jedoch meist mit hohem Aufwand verbunden und daher sehr tr{\"a}ge, was die Entwicklung und Verbreitung innovativer Dienste beeintr{\"a}chtigt. Derzeitig diskutierte Konzepte wie Software-Defined Networking (SDN) oder Netzvirtualisierung (NV) werden als eine M{\"o}glichkeit angesehen, die Altlasten der bestehenden Internetarchitektur zu l{\"o}sen. Beiden Konzepten gemein ist die Idee, logische Netze {\"u}ber dem physikalischen Substrat zu betreiben. Diese logischen Netze sind hochdynamisch und k{\"o}nnen so flexibel an die Anforderungen der jeweiligen Anwendungen angepasst werden. Insbesondere erlaubt das Konzept der Virtualisierung intelligentere Netzknoten, was innovative neue Anwendungsf{\"a}lle erm{\"o}glicht. Ein h{\"a}ufig in diesem Zusammenhang diskutierter Anwendungsfall ist die Mobilit{\"a}t sowohl von Endger{\"a}ten als auch von Diensten an sich. Die Mobilit{\"a}t der Dienste wird hierbei ausgenutzt, um die Zugriffsverz{\"o}gerung oder die belegten Ressourcen im Netz zu reduzieren, indem die Dienste zum Beispiel in f{\"u}r den Nutzer geographisch nahe Datenzentren migriert werden. Neben den reinen Mechanismen bez{\"u}glich Dienst- und Endger{\"a}temobilit{\"a}t sind in diesem Zusammenhang auch geeignete {\"U}berwachungsl{\"o}sungen relevant, welche die vom Nutzer wahrgenommene Dienstg{\"u}te bewerten k{\"o}nnen. Diese L{\"o}sungen liefern wichtige Entscheidungshilfen f{\"u}r die Migration oder {\"u}berwachen m{\"o}gliche Effekte der Migration auf die erfahrene Dienstg{\"u}te beim Nutzer. Im Falle von Video Streaming erm{\"o}glicht ein solcher Anwendungsfall die flexible Anpassung der Streaming Topologie f{\"u}r mobile Nutzer, um so die Videoqualit{\"a}t unabh{\"a}ngig vom Zugangsnetz aufrechterhalten zu k{\"o}nnen. Im Rahmen dieser Doktorarbeit wird der beschriebene Anwendungsfall am Beispiel einer Video Streaming Anwendung n{\"a}her analysiert und auftretende Herausforderungen werden diskutiert. Des Weiteren werden L{\"o}sungsans{\"a}tze vorgestellt und bez{\"u}glich ihrer Effizienz ausgewertet. Im Detail besch{\"a}ftigt sich die Arbeit mit der Leistungsanalyse von Mechanismen f{\"u}r die Dienstmobilit{\"a}t und entwickelt eine Architektur zur Optimierung der Dienstmobilit{\"a}t. Im Bereich Endger{\"a}temobilit{\"a}t werden Verbesserungen entwickelt, welche die Latenz zwischen Endger{\"a}t und Dienst reduzieren oder die Konnektivit{\"a}t unabh{\"a}ngig vom Zugangsnetz gew{\"a}hrleisten. Im letzten Teilbereich wird eine L{\"o}sung zur {\"U}berwachung der Videoqualit{\"a}t im Netz entwickelt und bez{\"u}glich ihrer Genauigkeit analysiert.},
  subject      = {Leistungsbewertung},
  language  = {en}
}
@phdthesis{Kluge2004,
  author    = {Kluge, Boris},
  title     = {Motion coordination for a mobile robot in dynamic environments},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-15508},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2004},
  abstract  = {Generating coordinated motion for a mobile robot operating in natural, continuously changing environments among moving obstacles such as humans is a complex task which requires the solution of various sub problems. In this thesis, we will cover the topics of perception and navigation in dynamic environments, as well as reasoning about the motion of the obstacles and of the robot itself. Perception is mainly considered for a laser range finder, and an according method for obstacle detection and tracking is proposed. Network optimization algorithms are used for data association in the tracking step, resulting in considerable robustness with respect to clutter by small objects. Navigation in general is accomplished using an adaptation of the velocity obstacle approach to the given vehicle kinematics, and cooperative motion coordination between the robot and a human guide is achieved using an appropriate selection rule for collision-free velocities. Next, the robot is enabled to compare its path to the path of a human guide using one of a collection of presented distance measures, which permits the detection of exceptional conditions. Furthermore, a taxonomy for the assessment of situations concerning the robot is presented, and following a summary of existing approaches to more intelligent and comprehensive perception, we propose a method for obstruction detection. Finally, a new approach to reflective navigation behaviors is described where the robot reasons about intelligent moving obstacles in its environment, which allows to adjust the character of the robot motion from regardful and defensive to more self-confident and aggressive behaviors.},
  subject      = {Bewegungsablauf},
  language  = {de}
}
@phdthesis{Kluegl2000,
  author    = {Kl{\"u}gl, Franziska},
  title     = {Aktivit{\"a}tsbasierte Verhaltensmodellierung und ihre Unterst{\"u}tzung bei Multiagentensimulationen},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2874},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2000},
  abstract  = {Durch Zusammenf{\"u}hrung traditioneller Methoden zur individuenbasierten Simulation und dem Konzept der Multiagentensysteme steht mit der Multiagentensimulation eine Methodik zur Verf{\"u}gung, die es erm{\"o}glicht, sowohl technisch als auch konzeptionell eine neue Ebene an Detaillierung bei Modellbildung und Simulation zu erreichen. Ein Modell beruht dabei auf dem Konzept einer Gesellschaft: Es besteht aus einer Menge interagierender, aber in ihren Entscheidungen autonomen Einheiten, den Agenten. Diese {\"a}ndern durch ihre Aktionen ihre Umwelt und reagieren ebenso auf die f{\"u}r sie wahrnehmbaren {\"A}nderungen in der Umwelt. Durch die Simulation jedes Agenten zusammen mit der Umwelt, in der er "lebt", wird die Dynamik im Gesamtsystem beobachtbar. In der vorliegenden Dissertation wurde ein Repr{\"a}sentationsschema f{\"u}r Multiagentensimulationen entwickelt werden, das es Fachexperten, wie zum Beispiel Biologen, erm{\"o}glicht, selbst{\"a}ndig ohne traditionelles Programmieren Multiagentenmodelle zu implementieren und mit diesen Experimente durchzuf{\"u}hren. Dieses deklarative Schema beruht auf zwei Basiskonzepten: Der K{\"o}rper eines Agenten besteht aus Zustandsvariablen. Das Verhalten des Agenten kann mit Regeln beschrieben werden. Ausgehend davon werden verschiedene Strukturierungsans{\"a}tze behandelt. Das wichtigste Konzept ist das der "Aktivit{\"a}t", einer Art "Verhaltenszustand": W{\"a}hrend der Agent in einer Aktivit{\"a}t A verweilt, f{\"u}hrt er die zugeh{\"o}rigen Aktionen aus und dies solange, bis eine Regel feuert, die diese Aktivit{\"a}t beendet und eine neue Aktivit{\"a}t ausw{\"a}hlt. Durch Indizierung dieser Regeln bei den zugeh{\"o}rigen Aktivit{\"a}ten und Einf{\"u}hrung von abstrakten Aktivit{\"a}ten entsteht ein Schema f{\"u}r eine vielf{\"a}ltig strukturierbare Verhaltensbeschreibung. Zu diesem Schema wurde ein Interpreter entwickelt, der ein derartig repr{\"a}sentiertes Modell ausf{\"u}hrt und so Simulationsexperimente mit dem Multiagentenmodell erlaubt. Auf dieser Basis wurde die Modellierungs- und Experimentierumgebung SeSAm ("Shell f{\"u}r Simulierte Agentensysteme") entwickelt. Sie verwendet vorhandene Konzepte aus dem visuellen Programmieren. Mit dieser Umgebung wurden Anwendungsmodelle aus verschiedenen Dom{\"a}nen realisiert: Neben abstrakten Spielbeispielen waren dies vor allem Fragestellungen zu sozialen Insekten, z.B. zum Verhalten von Ameisen, Bienen oder der Interaktion zwischen Bienenv{\"o}lkern und Milbenpopulationen.},
  subject      = {Agent <Informatik>},
  language  = {de}
}
@phdthesis{Kosub2001,
  author    = {Kosub, Sven},
  title     = {Complexity and Partitions},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2808},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2001},
  abstract  = {Computational complexity theory usually investigates the complexity of sets, i.e., the complexity of partitions into two parts. But often it is more appropriate to represent natural problems by partitions into more than two parts. A particularly interesting class of such problems consists of classification problems for relations. For instance, a binary relation R typically defines a partitioning of the set of all pairs (x,y) into four parts, classifiable according to the cases where R(x,y) and R(y,x) hold, only R(x,y) or only R(y,x) holds or even neither R(x,y) nor R(y,x) is true. By means of concrete classification problems such as Graph Embedding or Entailment (for propositional logic), this thesis systematically develops tools, in shape of the boolean hierarchy of NP-partitions and its refinements, for the qualitative analysis of the complexity of partitions generated by NP-relations. The Boolean hierarchy of NP-partitions is introduced as a generalization of the well-known and well-studied Boolean hierarchy (of sets) over NP. Whereas the latter hierarchy has a very simple structure, the situation is much more complicated for the case of partitions into at least three parts. To get an idea of this hierarchy, alternative descriptions of the partition classes are given in terms of finite, labeled lattices. Based on these characterizations the Embedding Conjecture is established providing the complete information on the structure of the hierarchy. This conjecture is supported by several results. A natural extension of the Boolean hierarchy of NP-partitions emerges from the lattice-characterization of its classes by considering partition classes generated by finite, labeled posets. It turns out that all significant ideas translate from the case of lattices. The induced refined Boolean hierarchy of NP-partitions enables us more accuratly capturing the complexity of certain relations (such as Graph Embedding) and a description of projectively closed partition classes.},
  subject      = {Partition <Mengenlehre>},
  language  = {en}
}
@phdthesis{Krenzer2023,
  author    = {Krenzer, Adrian},
  title     = {Machine learning to support physicians in endoscopic examinations with a focus on automatic polyp detection in images and videos},
  doi       = {10.25972/OPUS-31911},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319119},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {Deep learning enables enormous progress in many computer vision-related tasks. Artificial Intel- ligence (AI) steadily yields new state-of-the-art results in the field of detection and classification. Thereby AI performance equals or exceeds human performance. Those achievements impacted many domains, including medical applications. One particular field of medical applications is gastroenterology. In gastroenterology, machine learning algorithms are used to assist examiners during interventions. One of the most critical concerns for gastroenterologists is the development of Colorectal Cancer (CRC), which is one of the leading causes of cancer-related deaths worldwide. Detecting polyps in screening colonoscopies is the essential procedure to prevent CRC. Thereby, the gastroenterologist uses an endoscope to screen the whole colon to find polyps during a colonoscopy. Polyps are mucosal growths that can vary in severity. This thesis supports gastroenterologists in their examinations with automated detection and clas- sification systems for polyps. The main contribution is a real-time polyp detection system. This system is ready to be installed in any gastroenterology practice worldwide using open-source soft- ware. The system achieves state-of-the-art detection results and is currently evaluated in a clinical trial in four different centers in Germany. The thesis presents two additional key contributions: One is a polyp detection system with ex- tended vision tested in an animal trial. Polyps often hide behind folds or in uninvestigated areas. Therefore, the polyp detection system with extended vision uses an endoscope assisted by two additional cameras to see behind those folds. If a polyp is detected, the endoscopist receives a vi- sual signal. While the detection system handles the additional two camera inputs, the endoscopist focuses on the main camera as usual. The second one are two polyp classification models, one for the classification based on shape (Paris) and the other on surface and texture (NBI International Colorectal Endoscopic (NICE) classification). Both classifications help the endoscopist with the treatment of and the decisions about the detected polyp. The key algorithms of the thesis achieve state-of-the-art performance. Outstandingly, the polyp detection system tested on a highly demanding video data set shows an F1 score of 90.25 \% while working in real-time. The results exceed all real-time systems in the literature. Furthermore, the first preliminary results of the clinical trial of the polyp detection system suggest a high Adenoma Detection Rate (ADR). In the preliminary study, all polyps were detected by the polyp detection system, and the system achieved a high usability score of 96.3 (max 100). The Paris classification model achieved an F1 score of 89.35 \% which is state-of-the-art. The NICE classification model achieved an F1 score of 81.13 \%. Furthermore, a large data set for polyp detection and classification was created during this thesis. Therefore a fast and robust annotation system called Fast Colonoscopy Annotation Tool (FastCAT) was developed. The system simplifies the annotation process for gastroenterologists. Thereby the i gastroenterologists only annotate key parts of the endoscopic video. Afterward, those video parts are pre-labeled by a polyp detection AI to speed up the process. After the AI has pre-labeled the frames, non-experts correct and finish the annotation. This annotation process is fast and ensures high quality. FastCAT reduces the overall workload of the gastroenterologist on average by a factor of 20 compared to an open-source state-of-art annotation tool.},
  subject      = {Deep Learning},
  language  = {en}
}
@phdthesis{Lehrieder2013,
  author    = {Lehrieder, Frank},
  title     = {Performance Evaluation and Optimization of Content Distribution using Overlay Networks},
  doi       = {10.25972/OPUS-6420},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-76018},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {The work presents a performance evaluation and optimization of so-called overlay networks for content distribution in the Internet. Chapter 1 describes the importance which have such networks in today's Internet, for example, for the transmission of video content. The focus of this work is on overlay networks based on the peer-to-peer principle. These are characterized by the fact that users who download content, also contribute to the distribution process by sharing parts of the data to other users. This enables efficient content distribution because each user not only consumes resources in the system, but also provides its own resources. Chapter 2 of the monograph contains a detailed description of the functionality of today's most popular overlay network BitTorrent. It explains the various components and their interaction. This is followed by an illustration of why such overlay networks for Internet service providers (ISPs) are problematic. The reason lies in the large amount of inter-ISP traffic that is produced by these overlay networks. Since this inter-ISP traffic leads to high costs for ISPs, they try to reduce it by improved mechanisms for overlay networks. One optimization approach is the use of topology awareness within the overlay networks. It provides users of the overlay networks with information about the underlying physical network topology. This allows them to avoid inter-ISP traffic by exchanging data preferrentially with other users that are connected to the same ISP. Another approach to save inter-ISP traffic is caching. In this case the ISP provides additional computers in its network, called caches, which store copies of popular content. The users of this ISP can then obtain such content from the cache. This prevents that the content must be retrieved from locations outside of the ISP's network, and saves costly inter-ISP traffic in this way. In the third chapter of the thesis, the results of a comprehensive measurement study of overlay networks, which can be found in today's Internet, are presented. After a short description of the measurement methodology, the results of the measurements are described. These results contain data on a variety of characteristics of current P2P overlay networks in the Internet. These include the popularity of content, i.e., how many users are interested in specific content, the evolution of the popularity and the size of the files. The distribution of users within the Internet is investigated in detail. Special attention is given to the number of users that exchange a particular file within the same ISP. On the basis of these measurement results, an estimation of the traffic savings that can achieved by topology awareness is derived. This new estimation is of scientific and practical importance, since it is not limited to individual ISPs and files, but considers the whole Internet and the total amount of data exchanged in overlay networks. Finally, the characteristics of regional content are considered, in which the popularity is limited to certain parts of the Internet. This is for example the case of videos in German, Italian or French language. Chapter 4 of the thesis is devoted to the optimization of overlay networks for content distribution through caching. It presents a deterministic flow model that describes the influence of caches. On the basis of this model, it derives an estimate of the inter-ISP traffic that is generated by an overlay network, and which part can be saved by caches. The results show that the influence of the cache depends on the structure of the overlay networks, and that caches can also lead to an increase in inter-ISP traffic under certain circumstances. The described model is thus an important tool for ISPs to decide for which overlay networks caches are useful and to dimension them. Chapter 5 summarizes the content of the work and emphasizes the importance of the findings. In addition, it explains how the findings can be applied to the optimization of future overlay networks. Special attention is given to the growing importance of video-on-demand and real-time video transmissions.},
  subject      = {Leistungsbewertung},
  language  = {en}
}
@phdthesis{Loeffler2021,
  author    = {L{\"o}ffler, Andre},
  title     = {Constrained Graph Layouts: Vertices on the Outer Face and on the Integer Grid},
  edition   = {1. Auflage},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-146-4},
  doi       = {10.25972/WUP-978-3-95826-147-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-215746},
  school      = {W{\"u}rzburg University Press},
  pages     = {viii, 161},
  year      = {2021},
  abstract  = {Constraining graph layouts - that is, restricting the placement of vertices and the routing of edges to obey certain constraints - is common practice in graph drawing. In this book, we discuss algorithmic results on two different restriction types: placing vertices on the outer face and on the integer grid. For the first type, we look into the outer k-planar and outer k-quasi-planar graphs, as well as giving a linear-time algorithm to recognize full and closed outer k-planar graphs Monadic Second-order Logic. For the second type, we consider the problem of transferring a given planar drawing onto the integer grid while perserving the original drawings topology; we also generalize a variant of Cauchy's rigidity theorem for orthogonal polyhedra of genus 0 to those of arbitrary genus.},
  subject      = {Graphenzeichnen},
  language  = {en}
}
@phdthesis{Martin2008,
  author    = {Martin, R{\"u}diger},
  title     = {Resilience, Provisioning, and Control for the Network of the Future},
  doi       = {10.25972/OPUS-2504},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-28497},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2008},
  abstract  = {The Internet sees an ongoing transformation process from a single best-effort service network into a multi-service network. In addition to traditional applications like e-mail,WWW-traffic, or file transfer, future generation networks (FGNs) will carry services with real-time constraints and stringent availability and reliability requirements like Voice over IP (VoIP), video conferencing, virtual private networks (VPNs) for finance, other real-time business applications, tele-medicine, or tele-robotics. Hence, quality of service (QoS) guarantees and resilience to failures are crucial characteristics of an FGN architecture. At the same time, network operations must be efficient. This necessitates sophisticated mechanisms for the provisioning and the control of future communication infrastructures. In this work we investigate such echanisms for resilient FGNs. There are many aspects of the provisioning and control of resilient FGNs such as traffic matrix estimation, traffic characterization, traffic forecasting, mechanisms for QoS enforcement also during failure cases, resilient routing, or calability concerns for future routing and addressing mechanisms. In this work we focus on three important aspects for which performance analysis can deliver substantial insights: load balancing for multipath Internet routing, fast resilience concepts, and advanced dimensioning techniques for resilient networks. Routing in modern communication networks is often based on multipath structures, e.g., equal-cost multipath routing (ECMP) in IP networks, to facilitate traffic engineering and resiliency. When multipath routing is applied, load balancing algorithms distribute the traffic over available paths towards the destination according to pre-configured distribution values. State-of-the-art load balancing algorithms operate either on the packet or the flow level. Packet level mechanisms achieve highly accurate traffic distributions, but are known to have negative effects on the performance of transport protocols and should not be applied. Flow level mechanisms avoid performance degradations, but at the expense of reduced accuracy. These inaccuracies may have unpredictable effects on link capacity requirements and complicate resource management. Thus, it is important to exactly understand the accuracy and dynamics of load balancing algorithms in order to be able to exercise better network control. Knowing about their weaknesses, it is also important to look for alternatives and to assess their applicability in different networking scenarios. This is the first aspect of this work. Component failures are inevitable during the operation of communication networks and lead to routing disruptions if no special precautions are taken. In case of a failure, the robust shortest-path routing of the Internet reconverges after some time to a state where all nodes are again reachable - provided physical connectivity still exists. But stringent availability and reliability criteria of new services make a fast reaction to failures obligatory for resilient FGNs. This led to the development of fast reroute (FRR) concepts for MPLS and IP routing. The operations of MPLS-FRR have already been standardized. Still, the standards leave some degrees of freedom for the resilient path layout and it is important to understand the tradeoffs between different options for the path layout to efficiently provision resilient FGNs. In contrast, the standardization for IP-FRR is an ongoing process. The applicability and possible combinations of different concepts still are open issues. IP-FRR also facilitates a comprehensive resilience framework for IP routing covering all steps of the failure recovery cycle. These points constitute another aspect of this work. Finally, communication networks are usually over-provisioned, i.e., they have much more capacity installed than actually required during normal operation. This is a precaution for various challenges such as network element failures. An alternative to this capacity overprovisioning (CO) approach is admission control (AC). AC blocks new flows in case of imminent overload due to unanticipated events to protect the QoS for already admitted flows. On the one hand, CO is generally viewed as a simple mechanism, AC as a more complex mechanism that complicates the network control plane and raises interoperability issues. On the other hand, AC appears more cost-efficient than CO. To obtain advanced provisioning methods for resilient FGNs, it is important to find suitable models for irregular events, such as failures and different sources of overload, and to incorporate them into capacity dimensioning methods. This allows for a fair comparison between CO and AC in various situations and yields a better understanding of the strengths and weaknesses of both concepts. Such an advanced capacity dimensioning method for resilient FGNs represents the third aspect of this work.},
  subject      = {Backbone-Netz},
  language  = {en}
}
@phdthesis{Menth2004,
  author    = {Menth, Michael},
  title     = {Efficient admission control and routing for resilient communication networks},
  doi       = {10.25972/OPUS-846},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-9949},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2004},
  abstract  = {This work is subdivided into two main areas: resilient admission control and resilient routing. The work gives an overview of the state of the art of quality of service mechanisms in communication networks and proposes a categorization of admission control (AC) methods. These approaches are investigated regarding performance, more precisely, regarding the potential resource utilization by dimensioning the capacity for a network with a given topology, traffic matrix, and a required flow blocking probability. In case of a failure, the affected traffic is rerouted over backup paths which increases the traffic rate on the respective links. To guarantee the effectiveness of admission control also in failure scenarios, the increased traffic rate must be taken into account for capacity dimensioning and leads to resilient AC. Capacity dimensioning is not feasible for existing networks with already given link capacities. For the application of resilient NAC in this case, the size of distributed AC budgets must be adapted according to the traffic matrix in such a way that the maximum blocking probability for all flows is minimized and that the capacity of all links is not exceeded by the admissible traffic rate in any failure scenario. Several algorithms for the solution of that problem are presented and compared regarding their efficiency and fairness. A prototype for resilient AC was implemented in the laboratories of Siemens AG in Munich within the scope of the project KING. Resilience requires additional capacity on the backup paths for failure scenarios. The amount of this backup capacity depends on the routing and can be minimized by routing optimization. New protection switching mechanisms are presented that deviate the traffic quickly around outage locations. They are simple and can be implemented, e.g, by MPLS technology. The Self-Protecting Multi-Path (SPM) is a multi-path consisting of disjoint partial paths. The traffic is distributed over all faultless partial paths according to an optimized load balancing function both in the working case and in failure scenarios. Performance studies show that the network topology and the traffic matrix also influence the amount of required backup capacity significantly. The example of the COST-239 network illustrates that conventional shortest path routing may need 50\% more capacity than the optimized SPM if all single link and node failures are protected.},
  subject      = {Kommunikation},
  language  = {en}
}
@phdthesis{Milbrandt2007,
  author    = {Milbrandt, Jens},
  title     = {Performance Evaluation of Efficient Resource Management Concepts for Next Generation IP Networks},
  doi       = {10.25972/OPUS-1991},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-23332},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2007},
  abstract  = {Next generation networks (NGNs) must integrate the services of current circuit-switched telephone networks and packet-switched data networks. This convergence towards a unified communication infrastructure necessitates from the high capital expenditures (CAPEX) and operational expenditures (OPEX) due to the coexistence of separate networks for voice and data. In the end, NGNs must offer the same services as these legacy networks and, therefore, they must provide a low-cost packet-switched solution with real-time transport capabilities for telephony and multimedia applications. In addition, NGNs must be fault-tolerant to guarantee user satisfaction and to support business-critical processes also in case of network failures. A key technology for the operation of NGNs is the Internet Protocol (IP) which evolved to a common and well accepted standard for networking in the Internet during the last 25 years. There are two basically different approaches to achieve QoS in IP networks. With capacity overprovisioning (CO), an IP network is equipped with sufficient bandwidth such that network congestion becomes very unlikely and QoS is maintained most of the time. The second option to achieve QoS in IP networks is admission control (AC). AC represents a network-inherent intelligence that admits real-time traffic flows to a single link or an entire network only if enough resources are available such that the requirements on packet loss and delay can be met. Otherwise, the request of a new flow is blocked. This work focuses on resource management and control mechanisms for NGNs, in particular on AC and associated bandwidth allocation methods. The first contribution consists of a new link-oriented AC method called experience-based admission control (EBAC) which is a hybrid approach dealing with the problems inherent to conventional AC mechanisms like parameter-based or measurement-based AC (PBAC/MBAC). PBAC provides good QoS but suffers from poor resource utilization and, vice versa, MBAC uses resources efficiently but is susceptible to QoS violations. Hence, EBAC aims at increasing the resource efficiency while maintaining the QoS which increases the revenues of ISPs and postpones their CAPEX for infrastructure upgrades. To show the advantages of EBAC, we first review today's AC approaches and then develop the concept of EBAC. EBAC is a simple mechanism that safely overbooks the capacity of a single link to increase its resource utilization. We evaluate the performance of EBAC by its simulation under various traffic conditions. The second contribution concerns dynamic resource allocation in transport networks which implement a specific network admission control (NAC) architecture. In general, the performance of different NAC systems may be evaluated by conventional methods such as call blocking analysis which has often been applied in the context of multi-service asynchronous transfer mode (ATM) networks. However, to yield more practical results than abstract blocking probabilities, we propose a new method to compare different AC approaches by their respective bandwidth requirements. To present our new method for comparing different AC systems, we first give an overview of network resource management (NRM) in general. Then we present the concept of adaptive bandwidth allocation (ABA) in capacity tunnels and illustrate the analytical performance evaluation framework to compare different AC systems by their capacity requirements. Different network characteristics influence the performance of ABA. Therefore, the impact of various traffic demand models and tunnel implementations, and the influence of resilience requirements is investigated. In conclusion, the resources in NGNs must be exclusively dedicated to admitted traffic to guarantee QoS. For that purpose, robust and efficient concepts for NRM are required to control the requested bandwidth with regard to the available transmission capacity. Sophisticated AC will be a key function for NRM in NGNs and, therefore, efficient resource management concepts like experience-based admission control and adaptive bandwidth allocation for admission-controlled capacity tunnels, as presented in this work are appealing for NGN solutions.},
  subject      = {Ressourcenmanagement},
  language  = {en}
}
@phdthesis{Maeder2008,
  author    = {M{\"a}der, Andreas},
  title     = {Performance Models for UMTS 3.5G Mobile Wireless Systems},
  doi       = {10.25972/OPUS-2766},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-32525},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2008},
  abstract  = {Mobile telecommunication systems of the 3.5th generation (3.5G) constitute a first step towards the requirements of an all-IP world. As the denotation suggests, 3.5G systems are not completely new designed from scratch. Instead, they are evolved from existing 3G systems like UMTS or cdma2000. 3.5G systems are primarily designed and optimized for packet-switched best-effort traffic, but they are also intended to increase system capacity by exploiting available radio resources more efficiently. Systems based on cdma2000 are enhanced with 1xEV-DO (EV-DO: evolution, data-optimized). In the UMTS domain, the 3G partnership project (3GPP) specified the High Speed Packet Access (HSPA) family, consisting of High Speed Downlink Packet Access (HSDPA) and its counterpart High Speed Uplink Packet Access (HSUPA) or Enhanced Uplink. The focus of this monograph is on HSPA systems, although the operation principles of other 3.5G systems are similar. One of the main contributions of our work are performance models which allow a holistic view on the system. The models consider user traffic on flow-level, such that only on significant changes of the system state a recalculation of parameters like bandwidth is necessary. The impact of lower layers is captured by stochastic models. This approach combines accurate modeling and the ability to cope with computational complexity. Adopting this approach to HSDPA, we develop a new physical layer abstraction model that takes radio resources, scheduling discipline, radio propagation and mobile device capabilities into account. Together with models for the calculation of network-wide interference and transmit powers, a discrete-event simulation and an analytical model based on a queuing-theoretical approach are proposed. For the Enhanced Uplink, we develop analytical models considering independent and correlated other-cell interference.},
  subject      = {Mobilfunk},
  language  = {en}
}
@phdthesis{Niebler2019,
  author    = {Niebler, Thomas},
  title     = {Extracting and Learning Semantics from Social Web Data},
  doi       = {10.25972/OPUS-17866},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-178666},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2019},
  abstract  = {Making machines understand natural language is a dream of mankind that existed since a very long time. Early attempts at programming machines to converse with humans in a supposedly intelligent way with humans relied on phrase lists and simple keyword matching. However, such approaches cannot provide semantically adequate answers, as they do not consider the specific meaning of the conversation. Thus, if we want to enable machines to actually understand language, we need to be able to access semantically relevant background knowledge. For this, it is possible to query so-called ontologies, which are large networks containing knowledge about real-world entities and their semantic relations. However, creating such ontologies is a tedious task, as often extensive expert knowledge is required. Thus, we need to find ways to automatically construct and update ontologies that fit human intuition of semantics and semantic relations. More specifically, we need to determine semantic entities and find relations between them. While this is usually done on large corpora of unstructured text, previous work has shown that we can at least facilitate the first issue of extracting entities by considering special data such as tagging data or human navigational paths. Here, we do not need to detect the actual semantic entities, as they are already provided because of the way those data are collected. Thus we can mainly focus on the problem of assessing the degree of semantic relatedness between tags or web pages. However, there exist several issues which need to be overcome, if we want to approximate human intuition of semantic relatedness. For this, it is necessary to represent words and concepts in a way that allows easy and highly precise semantic characterization. This also largely depends on the quality of data from which these representations are constructed. In this thesis, we extract semantic information from both tagging data created by users of social tagging systems and human navigation data in different semantic-driven social web systems. Our main goal is to construct high quality and robust vector representations of words which can the be used to measure the relatedness of semantic concepts. First, we show that navigation in the social media systems Wikipedia and BibSonomy is driven by a semantic component. After this, we discuss and extend methods to model the semantic information in tagging data as low-dimensional vectors. Furthermore, we show that tagging pragmatics influences different facets of tagging semantics. We then investigate the usefulness of human navigational paths in several different settings on Wikipedia and BibSonomy for measuring semantic relatedness. Finally, we propose a metric-learning based algorithm in adapt pre-trained word embeddings to datasets containing human judgment of semantic relatedness. This work contributes to the field of studying semantic relatedness between words by proposing methods to extract semantic relatedness from web navigation, learn highquality and low-dimensional word representations from tagging data, and to learn semantic relatedness from any kind of vector representation by exploiting human feedback. Applications first and foremest lie in ontology learning for the Semantic Web, but also semantic search or query expansion.},
  subject      = {Semantik},
  language  = {en}
}
@phdthesis{Nogatz2023,
  author    = {Nogatz, Falco},
  title     = {Defining and Implementing Domain-Specific Languages with Prolog},
  doi       = {10.25972/OPUS-30187},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-301872},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {The landscape of today's programming languages is manifold. With the diversity of applications, the difficulty of adequately addressing and specifying the used programs increases. This often leads to newly designed and implemented domain-specific languages. They enable domain experts to express knowledge in their preferred format, resulting in more readable and concise programs. Due to its flexible and declarative syntax without reserved keywords, the logic programming language Prolog is particularly suitable for defining and embedding domain-specific languages. This thesis addresses the questions and challenges that arise when integrating domain-specific languages into Prolog. We compare the two approaches to define them either externally or internally, and provide assisting tools for each. The grammar of a formal language is usually defined in the extended Backus-Naur form. In this work, we handle this formalism as a domain-specific language in Prolog, and define term expansions that allow to translate it into equivalent definite clause grammars. We present the package library(dcg4pt) for SWI-Prolog, which enriches them by an additional argument to automatically process the term's corresponding parse tree. To simplify the work with definite clause grammars, we visualise their application by a web-based tracer. The external integration of domain-specific languages requires the programmer to keep the grammar, parser, and interpreter in sync. In many cases, domain-specific languages can instead be directly embedded into Prolog by providing appropriate operator definitions. In addition, we propose syntactic extensions for Prolog to expand its expressiveness, for instance to state logic formulas with their connectives verbatim. This allows to use all tools that were originally written for Prolog, for instance code linters and editors with syntax highlighting. We present the package library(plammar), a standard-compliant parser for Prolog source code, written in Prolog. It is able to automatically infer from example sentences the required operator definitions with their classes and precedences as well as the required Prolog language extensions. As a result, we can automatically answer the question: Is it possible to model these example sentences as valid Prolog clauses, and how? We discuss and apply the two approaches to internal and external integrations for several domain-specific languages, namely the extended Backus-Naur form, GraphQL, XPath, and a controlled natural language to represent expert rules in if-then form. The created toolchain with library(dcg4pt) and library(plammar) yields new application opportunities for static Prolog source code analysis, which we also present.},
  subject      = {PROLOG <Programmiersprache>},
  language  = {en}
}
@phdthesis{Oechsner2010,
  author    = {Oechsner, Simon},
  title     = {Performance Challenges and Optimization Potential of Peer-to-Peer Overlay Technologies},
  doi       = {10.25972/OPUS-4159},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-50015},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {In today's Internet, building overlay structures to provide a service is becoming more and more common. This approach allows for the utilization of client resources, thus being more scalable than a client-server model in this respect. However, in these architectures the quality of the provided service depends on the clients and is therefore more complex to manage. Resource utilization, both at the clients themselves and in the underlying network, determine the efficiency of the overlay application. Here, a trade-off exists between the resource providers and the end users that can be tuned via overlay mechanisms. Thus, resource management and traffic management is always quality-of-service management as well. In this monograph, the three currently significant and most widely used overlay types in the Internet are considered. These overlays are implemented in popular applications which only recently have gained importance. Thus, these overlay networks still face real-world technical challenges which are of high practical relevance. We identify the specific issues for each of the considered overlays, and show how their optimization affects the trade-offs between resource efficiency and service quality. Thus, we supply new insights and system knowledge that is not provided by previous work.},
  subject      = {Overlay-Netz},
  language  = {en}
}
@phdthesis{Ostermayer2017,
  author    = {Ostermayer, Ludwig},
  title     = {Integration of Prolog and Java with the Connector Architecture CAPJa},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-150713},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2017},
  abstract  = {Modern software is often realized as a modular combination of subsystems for, e. g., knowledge management, visualization, verification, or the interaction with users. As a result, software libraries from possibly different programming languages have to work together. Even more complex the case is if different programming paradigms have to be combined. This type of diversification of programming languages and paradigms in just one software application can only be mastered by mechanisms for a seamless integration of the involved programming languages. However, the integration of the common logic programming language Prolog and the popular object-oriented programming language Java is complicated by various interoperability problems which stem on the one hand from the paradigmatic gap between the programming languages, and on the other hand, from the diversity of the available Prolog systems. The subject of the thesis is the investigation of novel mechanisms for the integration of logic programming in Prolog and object-oriented programming in Java. We are particularly interested in an object-oriented, uniform approach which is not specific to just one Prolog system. Therefore, we have first identified several important criteria for the seamless integration of Prolog and Java from the object-oriented perspective. The main contribution of the thesis is a novel integration framework called the Connector Architecture for Prolog and Java (CAPJa). The framework is completely implemented in Java and imposes no modifications to the Java Virtual Machine or Prolog. CAPJa provides a semi-automated mechanism for the integration of Prolog predicates into Java. For compact, readable, and object-oriented queries to Prolog, CAPJa exploits lambda expressions with conditional and relational operators in Java. The communication between Java and Prolog is based on a fully automated mapping of Java objects to Prolog terms, and vice versa. In Java, an extensible system of gateways provides connectivity with various Prolog system and, moreover, makes any connected Prolog system easily interchangeable, without major adaption in Java.},
  subject      = {Logische Programmierung},
  language  = {en}
}
@phdthesis{Peng2019,
  author    = {Peng, Dongliang},
  title     = {An Optimization-Based Approach for Continuous Map Generalization},
  edition   = {1. Auflage},
  publisher = {W{\"u}rzburg University Press},
  address   = {W{\"u}rzburg},
  isbn      = {978-3-95826-104-4},
  doi       = {10.25972/WUP-978-3-95826-105-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-174427},
  school      = {W{\"u}rzburg University Press},
  pages     = {xv, 132},
  year      = {2019},
  abstract  = {Maps are the main tool to represent geographical information. Geographical information is usually scale-dependent, so users need to have access to maps at different scales. In our digital age, the access is realized by zooming. As discrete changes during the zooming tend to distract users, smooth changes are preferred. This is why some digital maps are trying to make the zooming as continuous as they can. The process of producing maps at different scales with smooth changes is called continuous map generalization. In order to produce maps of high quality, cartographers often take into account additional requirements. These requirements are transferred to models in map generalization. Optimization for map generalization is important not only because it finds optimal solutions in the sense of the models, but also because it helps us to evaluate the quality of the models. Optimization, however, becomes more delicate when we deal with continuous map generalization. In this area, there are requirements not only for a specific map but also for relations between maps at difference scales. This thesis is about continuous map generalization based on optimization. First, we show the background of our research topics. Second, we find optimal sequences for aggregating land-cover areas. We compare the A\$^{\!\star}\$\xspace algorithm and integer linear programming in completing this task. Third, we continuously generalize county boundaries to provincial boundaries based on compatible triangulations. We morph between the two sets of boundaries, using dynamic programming to compute the correspondence. Fourth, we continuously generalize buildings to built-up areas by aggregating and growing. In this work, we group buildings with the help of a minimum spanning tree. Fifth, we define vertex trajectories that allow us to morph between polylines. We require that both the angles and the edge lengths change linearly over time. As it is impossible to fulfill all of these requirements simultaneously, we mediate between them using least-squares adjustment. Sixth, we discuss the performance of some commonly used data structures for a specific spatial problem. Seventh, we conclude this thesis and present open problems.},
  subject      = {Generalisierung <Kartografie>},
  language  = {en}
}
@phdthesis{Pries2010,
  author    = {Pries, Jan Rastin},
  title     = {Performance Optimization of Wireless Infrastructure and Mesh Networks},
  doi       = {10.25972/OPUS-3723},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-46097},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2010},
  abstract  = {Future broadband wireless networks should be able to support not only best effort traffic but also real-time traffic with strict Quality of Service (QoS) constraints. In addition, their available resources are scare and limit the number of users. To facilitate QoS guarantees and increase the maximum number of concurrent users, wireless networks require careful planning and optimization. In this monograph, we studied three aspects of performance optimization in wireless networks: resource optimization in WLAN infrastructure networks, quality of experience control in wireless mesh networks, and planning and optimization of wireless mesh networks. An adaptive resource management system is required to effectively utilize the limited resources on the air interface and to guarantee QoS for real-time applications. Thereby, both WLAN infrastructure and WLAN mesh networks have to be considered. An a-priori setting of the access parameters is not meaningful due to the contention-based medium access and the high dynamics of the system. Thus, a management system is required which dynamically adjusts the channel access parameters based on the network load. While this is sufficient for wireless infrastructure networks, interferences on neighboring paths and self-interferences have to be considered for wireless mesh networks. In addition, a careful channel allocation and route assignment is needed. Due to the large parameter space, standard optimization techniques fail for optimizing large wireless mesh networks. In this monograph, we reveal that biology-inspired optimization techniques, namely genetic algorithms, are well-suitable for the planning and optimization of wireless mesh networks. Although genetic algorithms generally do not always find the optimal solution, we show that with a good parameter set for the genetic algorithm, the overall throughput of the wireless mesh network can be significantly improved while still sharing the resources fairly among the users.},
  subject      = {IEEE 802.11},
  language  = {en}
}
@phdthesis{Reith2001,
  author    = {Reith, Steffen},
  title     = {Generalized Satisfiability Problems},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-74},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2001},
  abstract  = {In the last 40 years, complexity theory has grown to a rich and powerful field in theoretical computer science. The main task of complexity theory is the classification of problems with respect to their consumption of resources (e.g., running time or required memory). To study the computational complexity (i.e., consumption of resources) of problems, similar problems are grouped into so called complexity classes. During the systematic study of numerous problems of practical relevance, no efficient algorithm for a great number of studied problems was found. Moreover, it was unclear whether such algorithms exist. A major breakthrough in this situation was the introduction of the complexity classes P and NP and the identification of hardest problems in NP. These hardest problems of NP are nowadays known as NP-complete problems. One prominent example of an NP-complete problem is the satisfiability problem of propositional formulas (SAT). Here we get a propositional formula as an input and it must be decided whether an assignment for the propositional variables exists, such that this assignment satisfies the given formula. The intensive study of NP led to numerous related classes, e.g., the classes of the polynomial-time hierarchy PH, P, \#P, PP, NL, L and \#L. During the study of these classes, problems related to propositional formulas were often identified to be complete problems for these classes. Hence some questions arise: Why is SAT so hard to solve? Are there modifications of SAT which are complete for other well-known complexity classes? In the context of these questions a result by E. Post is extremely useful. He identified and characterized all classes of Boolean functions being closed under superposition. It is possible to study problems which are connected to generalized propositional logic by using this result, which was done in this thesis. Hence, many different problems connected to propositional logic were studied and classified with respect to their computational complexity, clearing the borderline between easy and hard problems.},
  subject      = {Erf{\"u}llbarkeitsproblem},
  language  = {en}
}
@phdthesis{Reitwiessner2011,
  author    = {Reitwießner, Christian},
  title     = {Multiobjective Optimization and Language Equations},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-70146},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2011},
  abstract  = {Praktische Optimierungsprobleme beinhalten oft mehrere gleichberechtigte, sich jedoch widersprechende Kriterien. Beispielsweise will man bei einer Reise zugleich m{\"o}glichst schnell ankommen, sie soll aber auch nicht zu teuer sein. Im ersten Teil dieser Arbeit wird die algorithmische Beherrschbarkeit solcher mehrkriterieller Optimierungsprobleme behandelt. Es werden zun{\"a}chst verschiedene L{\"o}sungsbegriffe diskutiert und auf ihre Schwierigkeit hin verglichen. Interessanterweise stellt sich heraus, dass diese Begriffe f{\"u}r ein einkriterielles Problem stets gleich schwer sind, sie sich ab zwei Kriterien allerdings stark unterscheiden k{\"o}nen (außer es gilt P = NP). In diesem Zusammenhang wird auch die Beziehung zwischen Such- und Entscheidungsproblemen im Allgemeinen untersucht. Schließlich werden neue und verbesserte Approximationsalgorithmen f{\"u}r verschieden Varianten des Problems des Handlungsreisenden gefunden. Dabei wird mit Mitteln der Diskrepanztheorie eine Technik entwickelt, die ein grundlegendes Hindernis der Mehrkriteriellen Optimierung aus dem Weg schafft: Gegebene L{\"o}sungen so zu kombinieren, dass die neue L{\"o}sung in allen Kriterien m{\"o}glichst ausgewogen ist und gleichzeitig die Struktur der L{\"o}sungen nicht zu stark zerst{\"o}rt wird. Der zweite Teil der Arbeit widmet sich verschiedenen Aspekten von Gleichungssystemen f{\"u}r (formale) Sprachen. Einerseits werden konjunktive und Boolesche Grammatiken untersucht. Diese sind Erweiterungen der kontextfreien Grammatiken um explizite Durchschnitts- und Komplementoperationen. Es wird unter anderem gezeigt, dass man bei konjunktiven Grammatiken die Vereinigungsoperation stark einschr{\"a}nken kann, ohne dabei die erzeugte Sprache zu {\"a}ndern. Außerdem werden bestimmte Schaltkreise untersucht, deren Gatter keine Wahrheitswerte sondern Mengen von Zahlen berechnen. F{\"u}r diese Schaltkreise wird das {\"A}quivalenzproblem betrachtet, also die Frage ob zwei gegebene Schaltkreise die gleiche Menge berechnen oder nicht. Es stellt sich heraus, dass, abh{\"a}ngig von den erlaubten Gattertypen, die Komplexit{\"a}t des {\"A}quivalenzproblems stark variiert und f{\"u}r verschiedene Komplexit{\"a}tsklassen vollst{\"a}ndig ist, also als (parametrisierter) Vertreter f{\"u}r diese Klassen stehen kann.},
  subject      = {Mehrkriterielle Optimierung},
  language  = {en}
}
@phdthesis{Saska2009,
  author    = {Saska, Martin},
  title     = {Trajectory planning and optimal control for formations of autonomous robots},
  isbn      = {978-3-923959-56-3},
  doi       = {10.25972/OPUS-4622},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-53175},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2009},
  abstract  = {In this thesis, we present novel approaches for formation driving of nonholonomic robots and optimal trajectory planning to reach a target region. The methods consider a static known map of the environment as well as unknown and dynamic obstacles detected by sensors of the formation. The algorithms are based on leader following techniques, where the formation of car-like robots is maintained in a shape determined by curvilinear coordinates. Beyond this, the general methods of formation driving are specialized and extended for an application of airport snow shoveling. Detailed descriptions of the algorithms complemented by relevant stability and convergence studies will be provided in the following chapters. Furthermore, discussions of the applicability will be verified by various simulations in existing robotic environments and also by a hardware experiment.},
  subject      = {Autonomer Roboter},
  language  = {en}
}