@phdthesis{Kluegl2000,
  author    = {Kl{\"u}gl, Franziska},
  title     = {Aktivit{\"a}tsbasierte Verhaltensmodellierung und ihre Unterst{\"u}tzung bei Multiagentensimulationen},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2874},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2000},
  abstract  = {Durch Zusammenf{\"u}hrung traditioneller Methoden zur individuenbasierten Simulation und dem Konzept der Multiagentensysteme steht mit der Multiagentensimulation eine Methodik zur Verf{\"u}gung, die es erm{\"o}glicht, sowohl technisch als auch konzeptionell eine neue Ebene an Detaillierung bei Modellbildung und Simulation zu erreichen. Ein Modell beruht dabei auf dem Konzept einer Gesellschaft: Es besteht aus einer Menge interagierender, aber in ihren Entscheidungen autonomen Einheiten, den Agenten. Diese {\"a}ndern durch ihre Aktionen ihre Umwelt und reagieren ebenso auf die f{\"u}r sie wahrnehmbaren {\"A}nderungen in der Umwelt. Durch die Simulation jedes Agenten zusammen mit der Umwelt, in der er "lebt", wird die Dynamik im Gesamtsystem beobachtbar. In der vorliegenden Dissertation wurde ein Repr{\"a}sentationsschema f{\"u}r Multiagentensimulationen entwickelt werden, das es Fachexperten, wie zum Beispiel Biologen, erm{\"o}glicht, selbst{\"a}ndig ohne traditionelles Programmieren Multiagentenmodelle zu implementieren und mit diesen Experimente durchzuf{\"u}hren. Dieses deklarative Schema beruht auf zwei Basiskonzepten: Der K{\"o}rper eines Agenten besteht aus Zustandsvariablen. Das Verhalten des Agenten kann mit Regeln beschrieben werden. Ausgehend davon werden verschiedene Strukturierungsans{\"a}tze behandelt. Das wichtigste Konzept ist das der "Aktivit{\"a}t", einer Art "Verhaltenszustand": W{\"a}hrend der Agent in einer Aktivit{\"a}t A verweilt, f{\"u}hrt er die zugeh{\"o}rigen Aktionen aus und dies solange, bis eine Regel feuert, die diese Aktivit{\"a}t beendet und eine neue Aktivit{\"a}t ausw{\"a}hlt. Durch Indizierung dieser Regeln bei den zugeh{\"o}rigen Aktivit{\"a}ten und Einf{\"u}hrung von abstrakten Aktivit{\"a}ten entsteht ein Schema f{\"u}r eine vielf{\"a}ltig strukturierbare Verhaltensbeschreibung. Zu diesem Schema wurde ein Interpreter entwickelt, der ein derartig repr{\"a}sentiertes Modell ausf{\"u}hrt und so Simulationsexperimente mit dem Multiagentenmodell erlaubt. Auf dieser Basis wurde die Modellierungs- und Experimentierumgebung SeSAm ("Shell f{\"u}r Simulierte Agentensysteme") entwickelt. Sie verwendet vorhandene Konzepte aus dem visuellen Programmieren. Mit dieser Umgebung wurden Anwendungsmodelle aus verschiedenen Dom{\"a}nen realisiert: Neben abstrakten Spielbeispielen waren dies vor allem Fragestellungen zu sozialen Insekten, z.B. zum Verhalten von Ameisen, Bienen oder der Interaktion zwischen Bienenv{\"o}lkern und Milbenpopulationen.},
  subject      = {Agent <Informatik>},
  language  = {de}
}
@article{KoopmannStubbemannKapaetal.2021,
  author    = {Koopmann, Tobias and Stubbemann, Maximilian and Kapa, Matthias and Paris, Michael and Buenstorf, Guido and Hanika, Tom and Hotho, Andreas and J{\"a}schke, Robert and Stumme, Gerd},
  title     = {Proximity dimensions and the emergence of collaboration: a HypTrails study on German AI research},
  series = {Scientometrics},
  volume    = {126},
  journal   = {Scientometrics},
  number    = {12},
  issn      = {1588-2861},
  doi       = {10.1007/s11192-021-03922-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-269831},
  pages     = {9847-9868},
  year      = {2021},
  abstract  = {Creation and exchange of knowledge depends on collaboration. Recent work has suggested that the emergence of collaboration frequently relies on geographic proximity. However, being co-located tends to be associated with other dimensions of proximity, such as social ties or a shared organizational environment. To account for such factors, multiple dimensions of proximity have been proposed, including cognitive, institutional, organizational, social and geographical proximity. Since they strongly interrelate, disentangling these dimensions and their respective impact on collaboration is challenging. To address this issue, we propose various methods for measuring different dimensions of proximity. We then present an approach to compare and rank them with respect to the extent to which they indicate co-publications and co-inventions. We adapt the HypTrails approach, which was originally developed to explain human navigation, to co-author and co-inventor graphs. We evaluate this approach on a subset of the German research community, specifically academic authors and inventors active in research on artificial intelligence (AI). We find that social proximity and cognitive proximity are more important for the emergence of collaboration than geographic proximity.},
  language  = {en}
}
@phdthesis{Kosub2001,
  author    = {Kosub, Sven},
  title     = {Complexity and Partitions},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-2808},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2001},
  abstract  = {Computational complexity theory usually investigates the complexity of sets, i.e., the complexity of partitions into two parts. But often it is more appropriate to represent natural problems by partitions into more than two parts. A particularly interesting class of such problems consists of classification problems for relations. For instance, a binary relation R typically defines a partitioning of the set of all pairs (x,y) into four parts, classifiable according to the cases where R(x,y) and R(y,x) hold, only R(x,y) or only R(y,x) holds or even neither R(x,y) nor R(y,x) is true. By means of concrete classification problems such as Graph Embedding or Entailment (for propositional logic), this thesis systematically develops tools, in shape of the boolean hierarchy of NP-partitions and its refinements, for the qualitative analysis of the complexity of partitions generated by NP-relations. The Boolean hierarchy of NP-partitions is introduced as a generalization of the well-known and well-studied Boolean hierarchy (of sets) over NP. Whereas the latter hierarchy has a very simple structure, the situation is much more complicated for the case of partitions into at least three parts. To get an idea of this hierarchy, alternative descriptions of the partition classes are given in terms of finite, labeled lattices. Based on these characterizations the Embedding Conjecture is established providing the complete information on the structure of the hierarchy. This conjecture is supported by several results. A natural extension of the Boolean hierarchy of NP-partitions emerges from the lattice-characterization of its classes by considering partition classes generated by finite, labeled posets. It turns out that all significant ideas translate from the case of lattices. The induced refined Boolean hierarchy of NP-partitions enables us more accuratly capturing the complexity of certain relations (such as Graph Embedding) and a description of projectively closed partition classes.},
  subject      = {Partition <Mengenlehre>},
  language  = {en}
}
@techreport{KounevBrosigHuber2014,
  author    = {Kounev, Samuel and Brosig, Fabian and Huber, Nikolaus},
  title     = {The Descartes Modeling Language},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-104887},
  pages     = {91},
  year      = {2014},
  abstract  = {This technical report introduces the Descartes Modeling Language (DML), a new architecture-level modeling language for modeling Quality-of-Service (QoS) and resource management related aspects of modern dynamic IT systems, infrastructures and services. DML is designed to serve as a basis for self-aware resource management during operation ensuring that system QoS requirements are continuously satisfied while infrastructure resources are utilized as efficiently as possible.},
  subject      = {Ressourcenmanagement},
  language  = {en}
}
@article{KraftBirkReichertetal.2020,
  author    = {Kraft, Robin and Birk, Ferdinand and Reichert, Manfred and Deshpande, Aniruddha and Schlee, Winfried and Langguth, Berthold and Baumeister, Harald and Probst, Thomas and Spiliopoulou, Myra and Pryss, R{\"u}diger},
  title     = {Efficient processing of geospatial mHealth data using a scalable crowdsensing platform},
  series = {Sensors},
  volume    = {20},
  journal   = {Sensors},
  number    = {12},
  issn      = {1424-8220},
  doi       = {10.3390/s20123456},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-207826},
  year      = {2020},
  abstract  = {Smart sensors and smartphones are becoming increasingly prevalent. Both can be used to gather environmental data (e.g., noise). Importantly, these devices can be connected to each other as well as to the Internet to collect large amounts of sensor data, which leads to many new opportunities. In particular, mobile crowdsensing techniques can be used to capture phenomena of common interest. Especially valuable insights can be gained if the collected data are additionally related to the time and place of the measurements. However, many technical solutions still use monolithic backends that are not capable of processing crowdsensing data in a flexible, efficient, and scalable manner. In this work, an architectural design was conceived with the goal to manage geospatial data in challenging crowdsensing healthcare scenarios. It will be shown how the proposed approach can be used to provide users with an interactive map of environmental noise, allowing tinnitus patients and other health-conscious people to avoid locations with harmful sound levels. Technically, the shown approach combines cloud-native applications with Big Data and stream processing concepts. In general, the presented architectural design shall serve as a foundation to implement practical and scalable crowdsensing platforms for various healthcare scenarios beyond the addressed use case.},
  language  = {en}
}
@article{KraftReichertPryss2021,
  author    = {Kraft, Robin and Reichert, Manfred and Pryss, R{\"u}diger},
  title     = {Towards the interpretation of sound measurements from smartphones collected with mobile crowdsensing in the healthcare domain: an experiment with Android devices},
  series = {Sensors},
  volume    = {22},
  journal   = {Sensors},
  number    = {1},
  issn      = {1424-8220},
  doi       = {10.3390/s22010170},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-252246},
  year      = {2021},
  abstract  = {The ubiquity of mobile devices fosters the combined use of ecological momentary assessments (EMA) and mobile crowdsensing (MCS) in the field of healthcare. This combination not only allows researchers to collect ecologically valid data, but also to use smartphone sensors to capture the context in which these data are collected. The TrackYourTinnitus (TYT) platform uses EMA to track users' individual subjective tinnitus perception and MCS to capture an objective environmental sound level while the EMA questionnaire is filled in. However, the sound level data cannot be used directly among the different smartphones used by TYT users, since uncalibrated raw values are stored. This work describes an approach towards making these values comparable. In the described setting, the evaluation of sensor measurements from different smartphone users becomes increasingly prevalent. Therefore, the shown approach can be also considered as a more general solution as it not only shows how it helped to interpret TYT sound level data, but may also stimulate other researchers, especially those who need to interpret sensor data in a similar setting. Altogether, the approach will show that measuring sound levels with mobile devices is possible in healthcare scenarios, but there are many challenges to ensuring that the measured values are interpretable.},
  language  = {en}
}
@phdthesis{Krenzer2023,
  author    = {Krenzer, Adrian},
  title     = {Machine learning to support physicians in endoscopic examinations with a focus on automatic polyp detection in images and videos},
  doi       = {10.25972/OPUS-31911},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-319119},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2023},
  abstract  = {Deep learning enables enormous progress in many computer vision-related tasks. Artificial Intel- ligence (AI) steadily yields new state-of-the-art results in the field of detection and classification. Thereby AI performance equals or exceeds human performance. Those achievements impacted many domains, including medical applications. One particular field of medical applications is gastroenterology. In gastroenterology, machine learning algorithms are used to assist examiners during interventions. One of the most critical concerns for gastroenterologists is the development of Colorectal Cancer (CRC), which is one of the leading causes of cancer-related deaths worldwide. Detecting polyps in screening colonoscopies is the essential procedure to prevent CRC. Thereby, the gastroenterologist uses an endoscope to screen the whole colon to find polyps during a colonoscopy. Polyps are mucosal growths that can vary in severity. This thesis supports gastroenterologists in their examinations with automated detection and clas- sification systems for polyps. The main contribution is a real-time polyp detection system. This system is ready to be installed in any gastroenterology practice worldwide using open-source soft- ware. The system achieves state-of-the-art detection results and is currently evaluated in a clinical trial in four different centers in Germany. The thesis presents two additional key contributions: One is a polyp detection system with ex- tended vision tested in an animal trial. Polyps often hide behind folds or in uninvestigated areas. Therefore, the polyp detection system with extended vision uses an endoscope assisted by two additional cameras to see behind those folds. If a polyp is detected, the endoscopist receives a vi- sual signal. While the detection system handles the additional two camera inputs, the endoscopist focuses on the main camera as usual. The second one are two polyp classification models, one for the classification based on shape (Paris) and the other on surface and texture (NBI International Colorectal Endoscopic (NICE) classification). Both classifications help the endoscopist with the treatment of and the decisions about the detected polyp. The key algorithms of the thesis achieve state-of-the-art performance. Outstandingly, the polyp detection system tested on a highly demanding video data set shows an F1 score of 90.25 \% while working in real-time. The results exceed all real-time systems in the literature. Furthermore, the first preliminary results of the clinical trial of the polyp detection system suggest a high Adenoma Detection Rate (ADR). In the preliminary study, all polyps were detected by the polyp detection system, and the system achieved a high usability score of 96.3 (max 100). The Paris classification model achieved an F1 score of 89.35 \% which is state-of-the-art. The NICE classification model achieved an F1 score of 81.13 \%. Furthermore, a large data set for polyp detection and classification was created during this thesis. Therefore a fast and robust annotation system called Fast Colonoscopy Annotation Tool (FastCAT) was developed. The system simplifies the annotation process for gastroenterologists. Thereby the i gastroenterologists only annotate key parts of the endoscopic video. Afterward, those video parts are pre-labeled by a polyp detection AI to speed up the process. After the AI has pre-labeled the frames, non-experts correct and finish the annotation. This annotation process is fast and ensures high quality. FastCAT reduces the overall workload of the gastroenterologist on average by a factor of 20 compared to an open-source state-of-art annotation tool.},
  subject      = {Deep Learning},
  language  = {en}
}
@article{KrenzerHeilFittingetal.,
  author    = {Krenzer, Adrian and Heil, Stefan and Fitting, Daniel and Matti, Safa and Zoller, Wolfram G. and Hann, Alexander and Puppe, Frank},
  title     = {Automated classification of polyps using deep learning architectures and few-shot learning},
  series = {BMC Medical Imaging},
  volume    = {23},
  journal   = {BMC Medical Imaging},
  doi       = {10.1186/s12880-023-01007-4},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-357465},
  abstract  = {Background Colorectal cancer is a leading cause of cancer-related deaths worldwide. The best method to prevent CRC is a colonoscopy. However, not all colon polyps have the risk of becoming cancerous. Therefore, polyps are classified using different classification systems. After the classification, further treatment and procedures are based on the classification of the polyp. Nevertheless, classification is not easy. Therefore, we suggest two novel automated classifications system assisting gastroenterologists in classifying polyps based on the NICE and Paris classification. Methods We build two classification systems. One is classifying polyps based on their shape (Paris). The other classifies polyps based on their texture and surface patterns (NICE). A two-step process for the Paris classification is introduced: First, detecting and cropping the polyp on the image, and secondly, classifying the polyp based on the cropped area with a transformer network. For the NICE classification, we design a few-shot learning algorithm based on the Deep Metric Learning approach. The algorithm creates an embedding space for polyps, which allows classification from a few examples to account for the data scarcity of NICE annotated images in our database. Results For the Paris classification, we achieve an accuracy of 89.35 \%, surpassing all papers in the literature and establishing a new state-of-the-art and baseline accuracy for other publications on a public data set. For the NICE classification, we achieve a competitive accuracy of 81.13 \% and demonstrate thereby the viability of the few-shot learning paradigm in polyp classification in data-scarce environments. Additionally, we show different ablations of the algorithms. Finally, we further elaborate on the explainability of the system by showing heat maps of the neural network explaining neural activations. Conclusion Overall we introduce two polyp classification systems to assist gastroenterologists. We achieve state-of-the-art performance in the Paris classification and demonstrate the viability of the few-shot learning paradigm in the NICE classification, addressing the prevalent data scarcity issues faced in medical machine learning.},
  language  = {en}
}
@article{KrenzerMakowskiHekaloetal.2022,
  author    = {Krenzer, Adrian and Makowski, Kevin and Hekalo, Amar and Fitting, Daniel and Troya, Joel and Zoller, Wolfram G. and Hann, Alexander and Puppe, Frank},
  title     = {Fast machine learning annotation in the medical domain: a semi-automated video annotation tool for gastroenterologists},
  series = {BioMedical Engineering OnLine},
  volume    = {21},
  journal   = {BioMedical Engineering OnLine},
  number    = {1},
  doi       = {10.1186/s12938-022-01001-x},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-300231},
  year      = {2022},
  abstract  = {Background Machine learning, especially deep learning, is becoming more and more relevant in research and development in the medical domain. For all the supervised deep learning applications, data is the most critical factor in securing successful implementation and sustaining the progress of the machine learning model. Especially gastroenterological data, which often involves endoscopic videos, are cumbersome to annotate. Domain experts are needed to interpret and annotate the videos. To support those domain experts, we generated a framework. With this framework, instead of annotating every frame in the video sequence, experts are just performing key annotations at the beginning and the end of sequences with pathologies, e.g., visible polyps. Subsequently, non-expert annotators supported by machine learning add the missing annotations for the frames in-between. Methods In our framework, an expert reviews the video and annotates a few video frames to verify the object's annotations for the non-expert. In a second step, a non-expert has visual confirmation of the given object and can annotate all following and preceding frames with AI assistance. After the expert has finished, relevant frames will be selected and passed on to an AI model. This information allows the AI model to detect and mark the desired object on all following and preceding frames with an annotation. Therefore, the non-expert can adjust and modify the AI predictions and export the results, which can then be used to train the AI model. Results Using this framework, we were able to reduce workload of domain experts on average by a factor of 20 on our data. This is primarily due to the structure of the framework, which is designed to minimize the workload of the domain expert. Pairing this framework with a state-of-the-art semi-automated AI model enhances the annotation speed further. Through a prospective study with 10 participants, we show that semi-automated annotation using our tool doubles the annotation speed of non-expert annotators compared to a well-known state-of-the-art annotation tool. Conclusion In summary, we introduce a framework for fast expert annotation for gastroenterologists, which reduces the workload of the domain expert considerably while maintaining a very high annotation quality. The framework incorporates a semi-automated annotation system utilizing trained object detection models. The software and framework are open-source.},
  language  = {en}
}
@article{KruegerFriedrichFoersteretal.2012,
  author    = {Krueger, Beate and Friedrich, Torben and F{\"o}rster, Frank and Bernhardt, J{\"o}rg and Gross, Roy and Dandekar, Thomas},
  title     = {Different evolutionary modifications as a guide to rewire two-component systems},
  series = {Bioinformatics and Biology Insights},
  volume    = {6},
  journal   = {Bioinformatics and Biology Insights},
  doi       = {10.4137/BBI.S9356},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-123647},
  pages     = {97-128},
  year      = {2012},
  abstract  = {Two-component systems (TCS) are short signalling pathways generally occurring in prokaryotes. They frequently regulate prokaryotic stimulus responses and thus are also of interest for engineering in biotechnology and synthetic biology. The aim of this study is to better understand and describe rewiring of TCS while investigating different evolutionary scenarios. Based on large-scale screens of TCS in different organisms, this study gives detailed data, concrete alignments, and structure analysis on three general modification scenarios, where TCS were rewired for new responses and functions: (i) exchanges in the sequence within single TCS domains, (ii) exchange of whole TCS domains; (iii) addition of new components modulating TCS function. As a result, the replacement of stimulus and promotor cassettes to rewire TCS is well defined exploiting the alignments given here. The diverged TCS examples are non-trivial and the design is challenging. Designed connector proteins may also be useful to modify TCS in selected cases.},
  language  = {en}
}
@article{KrupitzerEberhardingerGerostathopoulosetal.2020,
  author    = {Krupitzer, Christian and Eberhardinger, Benedikt and Gerostathopoulos, Ilias and Raibulet, Claudia},
  title     = {Introduction to the special issue "Applications in Self-Aware Computing Systems and their Evaluation"},
  series = {Computers},
  volume    = {9},
  journal   = {Computers},
  number    = {1},
  issn      = {2073-431X},
  doi       = {10.3390/computers9010022},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-203439},
  year      = {2020},
  abstract  = {The joint 1st Workshop on Evaluations and Measurements in Self-Aware Computing Systems (EMSAC 2019) and Workshop on Self-Aware Computing (SeAC) was held as part of the FAS* conference alliance in conjunction with the 16th IEEE International Conference on Autonomic Computing (ICAC) and the 13th IEEE International Conference on Self-Adaptive and Self-Organizing Systems (SASO) in Ume{\aa}, Sweden on 20 June 2019. The goal of this one-day workshop was to bring together researchers and practitioners from academic environments and from the industry to share their solutions, ideas, visions, and doubts in self-aware computing systems in general and in the evaluation and measurements of such systems in particular. The workshop aimed to enable discussions, partnerships, and collaborations among the participants. This special issue follows the theme of the workshop. It contains extended versions of workshop presentations as well as additional contributions.},
  language  = {en}
}
@article{KuhnGrippFliederetal.2015,
  author    = {Kuhn, Joachim and Gripp, Tatjana and Flieder, Tobias and Dittrich, Marcus and Hendig, Doris and Busse, Jessica and Knabbe, Cornelius and Birschmann, Ingvild},
  title     = {UPLC-MRM Mass Spectrometry Method for Measurement of the Coagulation Inhibitors Dabigatran and Rivaroxaban in Human Plasma and Its Comparison with Functional Assays},
  series = {PLOS ONE},
  volume    = {10},
  journal   = {PLOS ONE},
  number    = {12},
  doi       = {10.1371/journal.pone.0145478},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-136023},
  pages     = {e0145478},
  year      = {2015},
  abstract  = {Introduction The fast, precise, and accurate measurement of the new generation of oral anticoagulants such as dabigatran and rivaroxaban in patients' plasma my provide important information in different clinical circumstances such as in the case of suspicion of overdose, when patients switch from existing oral anticoagulant, in patients with hepatic or renal impairment, by concomitant use of interaction drugs, or to assess anticoagulant concentration in patients' blood before major surgery. Methods Here, we describe a quick and precise method to measure the coagulation inhibitors dabigatran and rivaroxaban using ultra-performance liquid chromatography electrospray ionization-tandem mass spectrometry in multiple reactions monitoring (MRM) mode (UPLC-MRM MS). Internal standards (ISs) were added to the sample and after protein precipitation; the sample was separated on a reverse phase column. After ionization of the analytes the ions were detected using electrospray ionization-tandem mass spectrometry. Run time was 2.5 minutes per injection. Ion suppression was characterized by means of post-column infusion. Results The calibration curves of dabigatran and rivaroxaban were linear over the working range between 0.8 and 800 mu g/L (r > 0.99). Limits of detection (LOD) in the plasma matrix were 0.21 mu g/L for dabigatran and 0.34 mu g/L for rivaroxaban, and lower limits of quantification (LLOQ) in the plasma matrix were 0.46 mu g/L for dabigatran and 0.54 mu g/L for rivaroxaban. The intraassay coefficients of variation (CVs) for dabigatran and rivaroxaban were < 4\% and 6\%; respectively, the interassay CVs were < 6\% for dabigatran and < 9\% for rivaroxaban. Inaccuracy was < 5\% for both substances. The mean recovery was 104.5\% (range 83.8-113.0\%) for dabigatran and 87.0\%(range 73.6-105.4\%) for rivaroxaban. No significant ion suppressions were detected at the elution times of dabigatran or rivaroxaban. Both coagulation inhibitors were stable in citrate plasma at -20 degrees C, 4 degrees C and even at RT for at least one week. A method comparison between our UPLC-MRM MS method, the commercially available automated Direct Thrombin Inhibitor assay (DTI assay) for dabigatran measurement from CoaChrom Diagnostica, as well as the automated anti-Xa assay for rivaroxaban measurement from Chromogenix both performed by ACL-TOP showed a high degree of correlation. However, UPLC-MRM MS measurement of dabigatran and rivaroxaban has a much better selectivity than classical functional assays measuring activities of various coagulation factors which are susceptible to interference by other coagulant drugs. Conclusions Overall, we developed and validated a sensitive and specific UPLC-MRM MS assay for the quick and specific measurement of dabigatran and rivaroxaban in human plasma.},
  language  = {en}
}
@article{KunzLiangNillaetal.2016,
  author    = {Kunz, Meik and Liang, Chunguang and Nilla, Santosh and Cecil, Alexander and Dandekar, Thomas},
  title     = {The drug-minded protein interaction database (DrumPID) for efficient target analysis and drug development},
  series = {Database},
  volume    = {2016},
  journal   = {Database},
  doi       = {10.1093/database/baw041},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-147369},
  pages     = {baw041},
  year      = {2016},
  abstract  = {The drug-minded protein interaction database (DrumPID) has been designed to provide fast, tailored information on drugs and their protein networks including indications, protein targets and side-targets. Starting queries include compound, target and protein interactions and organism-specific protein families. Furthermore, drug name, chemical structures and their SMILES notation, affected proteins (potential drug targets), organisms as well as diseases can be queried including various combinations and refinement of searches. Drugs and protein interactions are analyzed in detail with reference to protein structures and catalytic domains, related compound structures as well as potential targets in other organisms. DrumPID considers drug functionality, compound similarity, target structure, interactome analysis and organismic range for a compound, useful for drug development, predicting drug side-effects and structure-activity relationships.},
  language  = {en}
}
@article{LandeckAlvarezIgarzabalUnruhetal.2022,
  author    = {Landeck, Maximilian and Alvarez Igarz{\´a}bal, Federico and Unruh, Fabian and Habenicht, Hannah and Khoshnoud, Shiva and Wittmann, Marc and Lugrin, Jean-Luc and Latoschik, Marc Erich},
  title     = {Journey through a virtual tunnel: Simulated motion and its effects on the experience of time},
  series = {Frontiers in Virtual Reality},
  volume    = {3},
  journal   = {Frontiers in Virtual Reality},
  issn      = {2673-4192},
  doi       = {10.3389/frvir.2022.1059971},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-301519},
  year      = {2022},
  abstract  = {This paper examines the relationship between time and motion perception in virtual environments. Previous work has shown that the perception of motion can affect the perception of time. We developed a virtual environment that simulates motion in a tunnel and measured its effects on the estimation of the duration of time, the speed at which perceived time passes, and the illusion of self-motion, also known as vection. When large areas of the visual field move in the same direction, vection can occur; observers often perceive this as self-motion rather than motion of the environment. To generate different levels of vection and investigate its effects on time perception, we developed an abstract procedural tunnel generator. The generator can simulate different speeds and densities of tunnel sections (visibly distinguishable sections that form the virtual tunnel), as well as the degree of embodiment of the user avatar (with or without virtual hands). We exposed participants to various tunnel simulations with different durations, speeds, and densities in a remote desktop and a virtual reality (VR) laboratory study. Time passed subjectively faster under high-speed and high-density conditions in both studies. The experience of self-motion was also stronger under high-speed and high-density conditions. Both studies revealed a significant correlation between the perceived passage of time and perceived self-motion. Subjects in the virtual reality study reported a stronger self-motion experience, a faster perceived passage of time, and shorter time estimates than subjects in the desktop study. Our results suggest that a virtual tunnel simulation can manipulate time perception in virtual reality. We will explore these results for the development of virtual reality applications for therapeutic approaches in our future work. This could be particularly useful in treating disorders like depression, autism, and schizophrenia, which are known to be associated with distortions in time perception. For example, the tunnel could be therapeutically applied by resetting patients' time perceptions by exposing them to the tunnel under different conditions, such as increasing or decreasing perceived time.},
  language  = {en}
}
@article{LatoschikWienrich2022,
  author    = {Latoschik, Marc Erich and Wienrich, Carolin},
  title     = {Congruence and plausibility, not presence: pivotal conditions for XR experiences and effects, a novel approach},
  series = {Frontiers in Virtual Reality},
  volume    = {3},
  journal   = {Frontiers in Virtual Reality},
  issn      = {2673-4192},
  doi       = {10.3389/frvir.2022.694433},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-284787},
  year      = {2022},
  abstract  = {Presence is often considered the most important quale describing the subjective feeling of being in a computer-generated and/or computer-mediated virtual environment. The identification and separation of orthogonal presence components, i.e., the place illusion and the plausibility illusion, has been an accepted theoretical model describing Virtual Reality (VR) experiences for some time. This perspective article challenges this presence-oriented VR theory. First, we argue that a place illusion cannot be the major construct to describe the much wider scope of virtual, augmented, and mixed reality (VR, AR, MR: or XR for short). Second, we argue that there is no plausibility illusion but merely plausibility, and we derive the place illusion caused by the congruent and plausible generation of spatial cues and similarly for all the current model's so-defined illusions. Finally, we propose congruence and plausibility to become the central essential conditions in a novel theoretical model describing XR experiences and effects.},
  language  = {en}
}
@techreport{LeGrossmannKrieger2022,
  type      = {Working Paper},
  author    = {Le, Duy Thanh and Großmann, Marcel and Krieger, Udo R.},
  title     = {Cloudless Resource Monitoring in a Fog Computing System Enabled by an SDN/NFV Infrastructure},
  series = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)},
  journal   = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)},
  doi       = {10.25972/OPUS-28072},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280723},
  pages     = {4},
  year      = {2022},
  abstract  = {Today's advanced Internet-of-Things applications raise technical challenges on cloud, edge, and fog computing. The design of an efficient, virtualized, context-aware, self-configuring orchestration system of a fog computing system constitutes a major development effort within this very innovative area of research. In this paper we describe the architecture and relevant implementation aspects of a cloudless resource monitoring system interworking with an SDN/NFV infrastructure. It realizes the basic monitoring component of the fundamental MAPE-K principles employed in autonomic computing. Here we present the hierarchical layering and functionality within the underlying fog nodes to generate a working prototype of an intelligent, self-managed orchestrator for advanced IoT applications and services. The latter system has the capability to monitor automatically various performance aspects of the resource allocation among multiple hosts of a fog computing system interconnected by SDN.},
  subject      = {Datennetz},
  language  = {en}
}
@phdthesis{Lehrieder2013,
  author    = {Lehrieder, Frank},
  title     = {Performance Evaluation and Optimization of Content Distribution using Overlay Networks},
  doi       = {10.25972/OPUS-6420},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-76018},
  school      = {Universit{\"a}t W{\"u}rzburg},
  year      = {2013},
  abstract  = {The work presents a performance evaluation and optimization of so-called overlay networks for content distribution in the Internet. Chapter 1 describes the importance which have such networks in today's Internet, for example, for the transmission of video content. The focus of this work is on overlay networks based on the peer-to-peer principle. These are characterized by the fact that users who download content, also contribute to the distribution process by sharing parts of the data to other users. This enables efficient content distribution because each user not only consumes resources in the system, but also provides its own resources. Chapter 2 of the monograph contains a detailed description of the functionality of today's most popular overlay network BitTorrent. It explains the various components and their interaction. This is followed by an illustration of why such overlay networks for Internet service providers (ISPs) are problematic. The reason lies in the large amount of inter-ISP traffic that is produced by these overlay networks. Since this inter-ISP traffic leads to high costs for ISPs, they try to reduce it by improved mechanisms for overlay networks. One optimization approach is the use of topology awareness within the overlay networks. It provides users of the overlay networks with information about the underlying physical network topology. This allows them to avoid inter-ISP traffic by exchanging data preferrentially with other users that are connected to the same ISP. Another approach to save inter-ISP traffic is caching. In this case the ISP provides additional computers in its network, called caches, which store copies of popular content. The users of this ISP can then obtain such content from the cache. This prevents that the content must be retrieved from locations outside of the ISP's network, and saves costly inter-ISP traffic in this way. In the third chapter of the thesis, the results of a comprehensive measurement study of overlay networks, which can be found in today's Internet, are presented. After a short description of the measurement methodology, the results of the measurements are described. These results contain data on a variety of characteristics of current P2P overlay networks in the Internet. These include the popularity of content, i.e., how many users are interested in specific content, the evolution of the popularity and the size of the files. The distribution of users within the Internet is investigated in detail. Special attention is given to the number of users that exchange a particular file within the same ISP. On the basis of these measurement results, an estimation of the traffic savings that can achieved by topology awareness is derived. This new estimation is of scientific and practical importance, since it is not limited to individual ISPs and files, but considers the whole Internet and the total amount of data exchanged in overlay networks. Finally, the characteristics of regional content are considered, in which the popularity is limited to certain parts of the Internet. This is for example the case of videos in German, Italian or French language. Chapter 4 of the thesis is devoted to the optimization of overlay networks for content distribution through caching. It presents a deterministic flow model that describes the influence of caches. On the basis of this model, it derives an estimate of the inter-ISP traffic that is generated by an overlay network, and which part can be saved by caches. The results show that the influence of the cache depends on the structure of the overlay networks, and that caches can also lead to an increase in inter-ISP traffic under certain circumstances. The described model is thus an important tool for ISPs to decide for which overlay networks caches are useful and to dimension them. Chapter 5 summarizes the content of the work and emphasizes the importance of the findings. In addition, it explains how the findings can be applied to the optimization of future overlay networks. Special attention is given to the growing importance of video-on-demand and real-time video transmissions.},
  subject      = {Leistungsbewertung},
  language  = {en}
}
@article{LeschKoenigKounevetal.2022,
  author    = {Lesch, Veronika and K{\"o}nig, Maximilian and Kounev, Samuel and Stein, Anthony and Krupitzer, Christian},
  title     = {Tackling the rich vehicle routing problem with nature-inspired algorithms},
  series = {Applied Intelligence},
  volume    = {52},
  journal   = {Applied Intelligence},
  issn      = {1573-7497},
  doi       = {10.1007/s10489-021-03035-5},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-268942},
  pages     = {9476-9500},
  year      = {2022},
  abstract  = {In the last decades, the classical Vehicle Routing Problem (VRP), i.e., assigning a set of orders to vehicles and planning their routes has been intensively researched. As only the assignment of order to vehicles and their routes is already an NP-complete problem, the application of these algorithms in practice often fails to take into account the constraints and restrictions that apply in real-world applications, the so called rich VRP (rVRP) and are limited to single aspects. In this work, we incorporate the main relevant real-world constraints and requirements. We propose a two-stage strategy and a Timeline algorithm for time windows and pause times, and apply a Genetic Algorithm (GA) and Ant Colony Optimization (ACO) individually to the problem to find optimal solutions. Our evaluation of eight different problem instances against four state-of-the-art algorithms shows that our approach handles all given constraints in a reasonable time.},
  language  = {en}
}
@techreport{LhamoNguyenFitzek2022,
  type      = {Working Paper},
  author    = {Lhamo, Osel and Nguyen, Giang T. and Fitzek, Frank H. P.},
  title     = {Virtual Queues for QoS Compliance of Haptic Data Streams in Teleoperation},
  series = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)},
  journal   = {W{\"u}rzburg Workshop on Next-Generation Communication Networks (WueWoWas'22)},
  doi       = {10.25972/OPUS-28076},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-280762},
  pages     = {4},
  year      = {2022},
  abstract  = {Tactile Internet aims at allowing perceived real-time interactions between humans and machines. This requires satisfying a stringent latency requirement of haptic data streams whose data rates vary drastically as the results of perceptual codecs. This introduces a complex problem for the underlying network infrastructure to fulfill the pre-defined level of Quality of Service (QoS). However, novel networking hardware with data plane programming capability allows processing packets differently and opens up a new opportunity. For example, a dynamic and network-aware resource management strategy can help satisfy the QoS requirements of different priority flows without wasting precious bandwidth. This paper introduces virtual queues for service differentiation between different types of traffic streams, leveraging protocol independent switch architecture (PISA). We propose coordinating the management of all the queues and dynamically adapting their sizes to minimize packet loss and delay due to network congestion and ensure QoS compliance.},
  subject      = {Datennetz},
  language  = {en}
}
@article{LiGuanGaoetal.2020,
  author    = {Li, Ningbo and Guan, Lianwu and Gao, Yanbin and Du, Shitong and Wu, Menghao and Guang, Xingxing and Cong, Xiaodan},
  title     = {Indoor and outdoor low-cost seamless integrated navigation system based on the integration of INS/GNSS/LIDAR system},
  series = {Remote Sensing},
  volume    = {12},
  journal   = {Remote Sensing},
  number    = {19},
  issn      = {2072-4292},
  doi       = {10.3390/rs12193271},
  url       = {http://nbn-resolving.de/urn:nbn:de:bvb:20-opus-216229},
  year      = {2020},
  abstract  = {Global Navigation Satellite System (GNSS) provides accurate positioning data for vehicular navigation in open outdoor environment. In an indoor environment, Light Detection and Ranging (LIDAR) Simultaneous Localization and Mapping (SLAM) establishes a two-dimensional map and provides positioning data. However, LIDAR can only provide relative positioning data and it cannot directly provide the latitude and longitude of the current position. As a consequence, GNSS/Inertial Navigation System (INS) integrated navigation could be employed in outdoors, while the indoors part makes use of INS/LIDAR integrated navigation and the corresponding switching navigation will make the indoor and outdoor positioning consistent. In addition, when the vehicle enters the garage, the GNSS signal will be blurred for a while and then disappeared. Ambiguous GNSS satellite signals will lead to the continuous distortion or overall drift of the positioning trajectory in the indoor condition. Therefore, an INS/LIDAR seamless integrated navigation algorithm and a switching algorithm based on vehicle navigation system are designed. According to the experimental data, the positioning accuracy of the INS/LIDAR navigation algorithm in the simulated environmental experiment is 50\% higher than that of the Dead Reckoning (DR) algorithm. Besides, the switching algorithm developed based on the INS/LIDAR integrated navigation algorithm can achieve 80\% success rate in navigation mode switching.},
  language  = {en}
}